Upload
chris-wimmer
View
333
Download
0
Embed Size (px)
Citation preview
Supplies:• 1” PVC pipe – 2 feet long
• 1 ¼” PVC pipe – 2 feet long• 1” PVC tee split• Extension cord (used one from home)• Outlet to socket adaptor• Lamp socket split• 2 CFL – Daylight spectrum & 100W equivalent
Step One: Prepare light stand platform • Drill or use a currently available 2” hole in the
top of the tote.• Cut the bottom half of the 2” net pot and place in
the hole.
Step Two: Assemble the light stand
• Attach the 1” PVC pipe and the PVC tee.
• Insert the 1” PVC pipe inside the 1 ¼” PVC pipe
Step Three: Add light stand adjustment feature
• Drill a hole through both pipes with a ¼” drill bit.
• Repeat this process 2 more times by extending the inside pipe up about 6” each time.
CaptainHydroponics has moved
Please note that I’ve moved my hydroponics site…. All the hydroponic content can be found here: http://healthsmartliving.com/hydroponics
Health Smart Living
HealthSmartLiving.com
Step Four: Wire lighting system • Thread the extension cord
through the PVC tee• Assemble the lighting system:
Outlet to socket adaptor, lamp socket splitter, and 2 CFL bulbs
• Plug in the ‘lighting system’ to the extension cord
• Secure the lights by looping the cord around the PVC tee