Upload
designyourowndraperies
View
249
Download
0
Tags:
Embed Size (px)
DESCRIPTION
Measuring properly for your custom window treatments can be challenging but here are some tips to help you though the process.
Citation preview
How To Measure Your Custom Window
Treatments
o Measuring custom draperies can seem a little daunting
o Throughout you will find basic measuring tips to help you through this process.
Measuring Tips
o Every window size is different, so measuring correctly for custom window treatment sizes offers the ability to cover your window perfectly!
o Decide where your rods will be placedo Inside your windowo On the window trimo Extended beyond the trim and window opening
o Based on above, decide brackets location o Measure the width of the area between
brackets
It all starts with your rodsDetermining Rod Placement
Measuring tips for all
drapery and valance styles.
o Simple Valances:o Rod pocket window valanceo Mounted on either a 2 ½”
flat rod, a 1” single or a 1” double rod.
o For valance mounted over
drapery panels:o Outside valance rod must
clear the inside rod projection- 5 1/2"
Valance Rods
o Rods have varying rod projectionso Number of inches rod
projects from the wall
o Round measurement up to nearest whole numbero Typically mounted 2" to
5" above window frameo 1" to 4" beyond widow
frame width
Projections
Rod Pocket Valances
o Calculating width o add your projections
into your rod face width
o Example:o Face width is 60”o Projection is 3”o Add 6” to your face
width of 60” o You would order a 66”
width for your valance.
o Gatheredo Scarf
o Flat
Styles
Pleated Panels
o We recommend that you work with us to determine proper sizing for pleated panels to ensure a perfect fit for your custom window treatment.
o What we needo Size of your rodo Size of your rod projection
Drapery Panels
Rod Pocket Panels
o Typically used on windows for decorative purposes only.
o Does not require a perfect fit
o For average size window widths, you will only need a 2-width pair - 2 panels at 50” in width each for a total of 100”.
Grommet and Flat Panels
o Very simplistic treatment and has a contemporary look
o Rod projection is not necessary
o Take your rod face width and multiply by 1 ½ or 2 to get your total width
Visit Design Your Own Draperies for complete measuring tips on all your custom window treatments.
1-855-BUY-DYOD