Catalogue - Lenze Smart Motor

Automation systemsDrive solutions

ControlsInverterMotorsGearboxesEngineering Tools

Motors: Lenze Smart Motor m300

L-force catalogue

Lenze makes many things easy for you.About Lenze

Amatter of principle: the right products for every application.

L-force product portfolio

1.1Controller-based AutomationAutomation systems

1.2Drive-based automation

2.1HighLine tasksDrive solutions

2.2StateLine tasks

2.3BaseLine tasks

3.1Panel PC v800VisualisationControls

3.2Monitor v200

3.3Controller 3200 CCabinet Controllers

3.4Controller c300

3.5Controller p500Panel Controllers

3.6Controller p300

3.7I/O System 1000'

4.1Inverter Drives 8400 protecDecentralisedInverter

4.2Inverter Drives 8400 motec

4.3Servo Drives 9400 HighLineCabinet

4.4Inverter Drives 8400 TopLine

4.5Servo-Inverter i700

4.6Inverter Drives 8400 HighLine

4.7Inverter Drives 8400 StateLine

4.8Inverter Drives 8400 BaseLine

5.1MCS synchronous servo motorsServo motorsMotors

5.2MCM synchronous servo motors

5.3MD☐KS synchronous servo motors

5.4MQA asynchronous servo motors

5.5MCA asynchronous servo motors

5.6IE3 three-phase AC motors m500Three-phase AC motors

5.7Inverter opt. three-phase AC motors MF

5.8IE2 MH three-phase AC motors

5.9IE1 MD three-phase AC motors

5.10Lenze Smart Motor m300

5.11IE3 three-phase AC motors m200

5.12IE1/2 three-phase AC motors Basic MD/MH

6.1g700-P planetary gearboxAxial gearboxesGearboxes

6.2MPR/MPG planetary gearboxes

6.3g500-H helical gearboxes

6.4g500-S shaft-mounted helical gearbox

6.5g500-B bevel gearboxRight-angle gearboxes

6.6Assignment see aboveMotor data

7.1NavigatorEngineering Tools

7.2Drive Solution Designer

7.3Drive Solution Catalogue

7.4Engineer

7.5PLC Designer

7.6VisiWinNET®

7.7EASY Starter

Selected portfolio

Additional portfolio

Contents of the L-force catalogue

Lenze makes manythings easy for you.Withourmotivated and committed approach,weworktogether with you to create the best possible solutionand set your ideas inmotion - whether you are lookingto optimise an existingmachine or develop a new one.We always strive to make things easy and seek perfec-tion therein. This is anchored in our thinking, in ourservices and in every detail of our products. It's as easyas that!

321

Implementing solutionsDrafting conceptsDeveloping ideas

Our easy formula for satisfied customers isto establish an active partnership with fast

We seewelcome challenges in yourmachinetasks, supporting youwith our comprehens-

Are you looking to build the best machinepossible and alreadyhave some initial ideas?

decision making processes and an individu-ive expertise andproviding valuable impetusThenget thesedownonpaper togetherwithally tailored offer. We have been using thisfor your innovations. We take a holistic viewus, startingwith small innovative details andprinciple to meet the ever more specialisedof the individual motion and control func-stretching all the way to completely newcustomer requirements in the field of ma-chine engineering for many years.

tions here and draw up consistent, end-to-end drive and automation solutions for you

machines.Working together,wewill developan intelligent and sustainable concept that

- keeping everything as easy as possible andas extensive as necessary.

is perfectly alignedwith your specific require-ments.

54

Ensuring productivityManufacturing machines

Productivity, reliability andnewperformancepeaks on a daily basis – these are our key

Functional diversity in perfect harmony: asone of the few full-range providers in the

success factors for yourmachine. After deliv-market, we can provide you with preciselyery, we offer you cleverly devised servicethoseproducts that youactually need for anyconcepts to ensure continued safe operation.machine task – no more and no less. Our L-The primary focus here is on technical sup-force product portfolio, a consistent platformport, based on the excellent application ex-for implementing drive and automation

tasks, is invaluable in this regard. pertise of our highly-skilled and knowledge-able after-sales team.

Amatter of prin-ciple:the right productsfor every application.

Lenze's extensive L-force product portfolio follows avery simple principle. The functions of our finely scaledproducts areassigned to the three linesBase-Line, State-Line or High-Line.

But what does this mean for you? It allows you toquickly recognise which products represent the bestsolution for your own specific requirements.

Powerful products with a major impact:• Easy handling• High quality and durability• Reliable technologies in tunewith the latest develop-ments

Lenze products undergo the most stringent testing inour own laboratory. This allows us to ensure that youwill receive consistently high quality and a long servicelife. In addition to this, five logistics centres ensure thatthe Lenze products you select are available for quickdelivery anywhere across the globe. It's as easy as that!

Controls

Engineering Tools


Inverter


Motors


Gearboxes


Lenze Smart Motorm3001.75 and 5.0 Nm

Motors

5.10 - 4List of abbreviationsGeneral information

5.10 - 5Product key

5.10 - 6Product information

5.10 - 7Equipment

5.10 - 8Easy setting

5.10 - 9Smooth, soft starts and stops

5.10 - 10Installation topologies

5.10 - 11Functions and features

5.10 - 13Standards and operating conditionsTechnical data

5.10 - 14Rated data

5.10 - 15Permissible radial and axial forces

5.10 - 16Dimensions

5.10 - 22Surface and corrosion protection

5.10 - 23Motor connectionAccessories

5.10 - 24Connections via plug connectors

5.10 - 24Connections via cable glands

5.10 - 25Spring-applied brake

5.10 - 29Brake resistors

5.10 - 30NFC adapter

5.10 - 30Nuts for QUICKON connection

5.10 - 31Easy setting

Lenze Smart Motor m300Contents

5.10

List of abbreviations

Max. mains voltage[V]UmaxEfficiency[%]η100 %Efficiency[%]η75 % Min. mains voltage[V]Umin

Rated voltage[V]UN, ΔEfficiency[%]η50 %Power factorcos ϕ Rated voltage[V]UN, YRated current[A]INMax. current consumption[A]ImaxMoment of inertia[kgcm²]JMass[kg]mStarting torque[Nm]MaStalling torque[Nm]MbMax. torque[Nm]MmaxRated torque[Nm]MNRated speed[r/min]nNRated power[kW]PNMax. power input[kW]Pmax

Communauté EuropéenneCECanadian Standards AssociationCSADeutsches Institut für Normung e.V.DINElectromagnetic compatibilityEMCEuropean standardENInternational Electrotechnical CommissionIECInternational Mounting CodeIMInternational Protection CodeIPNational Electrical Manufacturers AssociationNEMAUnderwriters Laboratory Listed ProductULUnderwriters Laboratory Recognized ProductURVerband deutscher Elektrotechniker (Association ofGerman Electrical Engineers)

VDE

China Compulsory CertificateCCCCustomsunionRussia /Belarus /Kazakhstan certificateEACCombined certification marks of UL for the USA andCanada

cURus

Certificate for UkraineUkrSEPRO

Lenze | V03-en_GB-04/20155.10 - 4

Lenze Smart Motor m300General information

5.10

Product key

M M A

E

X X

-

S 2 C

L

3

B R

Internal key

With brake

Without built-on

accessories

CCC

UL/CSA

CE4-pole

ApprovalNumber of

pole pairs

Lenze

Smart

Motor

Built-on

accessories

With integral fan

Motor type

(Example: 063-4)

Frame size

5.10 - 5Lenze | V03-en_GB-04/2015


5.10

Product information

New freedom in motion for engineers.The Lenze SmartMotor reduces thenumber of different drive versionsby up to 70%. Without contactor or starter, fixed speeds can be setatwill and there aremany integrated functions formaterials handlingapplications. The Lenze Smart Motor also meets the strictest energyefficiency requirements and can be operated very conveniently usinga smartphone.Highlights• Freely adjustable speed reduces the number of different versions• Integrated soft-start functionality• Less wiring thanks to electronic contactor and motor protectionfunction

• Exceptional energy efficiency• Canbeoperatedwith anNFC-capable smartphoneusing the Lenzeapp

g500 helical gearbox with Lenze Smart Motor• Optional brake control for low-wear brake control

Reducing the number of different drive versions with ease

In the past, different output speeds (e.g. for various conveyor speeds)were achieved through use of different gearbox ratios or, in the caseof extreme differences, via the number of pole pairs in the motors.This led to a large number of different motors being required.The Lenze Smart Motor has completely changed this. Thanks to theability to freely adjust the motor speed in a range from 500 to 2,600rpm, various speeds cannowbehandled safely and reliablyusing justa singlemotor. This significantly reduces the timeandcosts associatedwith dimensioning, selecting specific units, procurement and ware-housing.

MSEMA☐☐063-42

8

7

6

5

4

3

2

1

00 500 1000 1500 2000 2500 3000

[r/min]

[Nm]

MSEMA☐☐080-32

25

20

15

10

5

00 500 1000 1500 2000 2500 3000

[r/min]

[Nm]

——— Max. torque——— rated torque

Lenze | V03-en_GB-04/20155.10 - 6


5.10

Equipment

The equipment includes all the options available as standard and allthe built-on accessories of the product.

Connection

External brake resistor

Speed setting

via smartphone

via PC using the NFC adapter

M12 connector

Control connection

In the terminal box or via

QUICKON connector

Motor connection

Foot (B3)

Flange (B5) with through holes

Flange (B14) with threaded holes

Geared motor with g500 gearboxes

Design

Internal brake resistor

Standard

LongLife

Manual release lever

Spring-applied brake

Integral fan

Cooling

5.10 - 7Lenze | V03-en_GB-04/2015


5.10

Easy setting

Adapting the Lenze Smart Motor to the application and performingdiagnostics both take place using NFC (near field communication)technology. Thedrive canbe setupquickly andeasilywithoutopeningthe terminal box, without voltage supply and without complex ad-dressing.The only tool that is required for this is an NFC-capable Androidsmartphone or the Lenze NFC Adapter for PCs. The data can then bereadandwrittenwhile the system isdeenergised–of course includingpassword protection.

Data that can be set:• Data record name(e.g. the designation of the drive in your documentation)

• Speed and direction of rotation 1 (can also be controlled withoutdigital inputs)

• Speed and direction of rotation 2-5 (can be controlled using digitalinputs)

• Acceleration time• Deceleration time• Energy saving function Setting via smartphone

Data that can be read:• Identification data(Lenze material and serial number, type designation, softwareversion)

• Error messages• Operating and activation hours

Setting via smartphone

The Lenze Smart Motor can be set up using an Android smartphone.The corresponding app (available in both German and English) canbe ordered via www.Lenze.com or downloaded via the Google Store.The data records created are also easy to archive on the smartphone,fromwhere they can then be reloaded to the Lenze Smart Motor forrepeat applications.

Setting via PC

The Lenze SmartMotor canbe set upusing the EASY Starter engineer-ing tool (extended version, software licence "EASY Advanced" or "En-gineer HighLevel" required). The software can easily be downloadedvia www.Lenze.com. Since the settings are very easy and clearlystructured, the Lenze Smart Motor also uses a basic dialog that canbe called up directly via the navigator. The corresponding button islocated directly in the navigation bar. Just like other product settings,the parameter values can be archived here.

Lenze | V03-en_GB-04/20155.10 - 8


5.10

Smooth, soft starts and stops

An acceleration ramp and - in contrast with conventional starters - adeceleration ramp can also be set on the Lenze Smart Motor. Thisguaranteesdefined, jerk-freehandlingof thematerial being transpor-ted.

Worldwide and efficientContactor and motor protection functionality integrated

The Lenze Smart Motor already complies with the strictest energyefficiency requirements of the future.Many conveyor systems require

The Lenze Smart Motor can be started and stopped using digital in-puts. It is also possible to switch between different speeds and direc-

a high level of starting torque, but only a low level of continuoustions of rotation. Up to 5 different speeds (e.g. creep speed andtorque. With its 4-fold overload capacity, the Lenze Smart Motor isstandard speed in both directions, as well as stop) can therefore bethe ideal solution here. If very little torque is required in the partialhandled with just a single motor. Reversing contactor and pole

switchovers are then a thing of the past. load operational range, the integrated energy saving function isautomatically activated and then optimises energy consumption.In addition to this, external motor protection devices are no longer

required, as temperature, short circuit, earth fault and phase faultmonitors are all already integrated.

The drive can be used worldwide in all three-phase mains systemswith 400 up to 480 V supply voltage and 50 up to 60 Hz.

Easy installation

Alongside the power connection directly in the terminal box, theLenze Smart Motor offers a particularly intelligent connection tech-nology as an option – Phoenix Contact QUICKON. This allows theelectrical installation to be completed in under aminutewithout theneed for any special tools.Thedigital inputs andoutputs are connected to standard commercialM12 sockets by default.As such, already existing signal cables can still be used inmany cases.

The m300 Lenze Smart Motor in the field of horizontal materials handling

5.10 - 9Lenze | V03-en_GB-04/2015


5.10

Installation topologies

Full flexibility – Simply go with the system of your choice:

Fieldbus connectionEnergy distribution

Apart fromdirect connectionof the LenzeSmartMotor's digital inputsand outputs to a PLC, the control signals can be

Almost any standard commercial energy distribution system can beused with the stub on the Lenze Smart Motor.

connected tovirtually any fieldbususing standard commercial decent-ralised I/Omodules. The sensor signals of your conveyor line can alsobe integrated into the fieldbus in this way.

Topology - decentrally controlled using field distributorsTopology - centrally controlled via controllers

Lenze | V03-en_GB-04/20155.10 - 10


5.10

Functions and features

Size

080063MotorDesign

B3B5B14

Direct gearbox attachmentShaft journal

19 x 4011 x 23[mm]d x lSpring-applied brake

Standard or LongLife designDesignWith manual release lever

Monitoring and protectivemeasures

Short circuit (limited), error acknowledgement is requiredEarth fault (limited), error acknowledgement is required

OvervoltageOvercurrent

Motor overtemperatureMains phase failure

Protection for cyclical mains switchingMotor stalling

Motor connection

Terminal boxPower connectionQUICKON-connector

M12 connectorControl connectionShaft bearings

Standard motors (B3, B5, B14): side BPosition of the locating bearingMotors for gearbox direct mounting: side A

Deep-groove ball bearing with high-temperature resistant grease, 2 sealing discs or cover platesBearing typeColour

Not coatedPrimed

Paint in various corrosion-protection designs in accordance with RAL coloursFurther options

Brake resistor

5.10 - 11Lenze | V03-en_GB-04/2015


5.10

Lenze | V03-en_GB-04/20155.10 - 12


5.10

Standards and operating conditions

Mode

Lenze Smart Motor m300ProductConformity

Low-Voltage DirectiveCE

2006/95/EC

TP TC 004/2011 (TR CU 004/2011)EACTP TC 020/2011 (TR CU 020/2011)

Approval

GB Standard 12350-2009CCC

CSA 22.2 No. 14UL/CSAUL 61800-5-1

Industrial Control Equipment, Lenze File No. E132659Degree of protection

IP55 1)EN 60529Climatic conditions

1K3 (temperature: -20 °C ... +60 °C)Storage (EN 60721-3-1)

2K3 (temperature: -20 °C ... +70 °C)Transport (EN 60721-3-2)

NaN Attribut 1662 has no DataOperation (EN 60721-3-3)3K3 (temperature: -30 °C ... -10 °C) for deep-freeze applica-

tions3K3 (temperature : -10 °C ... +40 °C)

Site altitude

4000[m]HmaxAmsl

5.00[%/1000 m]Current derating at over 1000 mVibration resistance

2M2Transport (EN 60721-3-2)

3M4Operation (EN 60721-3-3)Vibrational severity

AIEC/EN 60034-14

Mode

Lenze Smart Motor m300ProductSupply form

Systems with earthed star point (TN and TT systems)Noise immunity

Category C2EN 61800-3Insulation resistance

Overvoltage category IIIEN 61800-5-1Above 2000 m amsl overvoltage category II

Degree of pollution

2EN 61800-5-1Protective insulation of control circuits

Safe mains isolation: double/reinforced insulationEN 61800-5-1for digital inputs and outputs

Operation on public supply systems

The devices are designed for the use in industrial environ-ments. If they areusedonpublic systems,measures to reduce

EN 61000-3-2/EN 61000-3-12

the expected emission of radio interferences are to be imple-mented. The machine/systemmanufacturer is responsiblefor compliance with the requirements for the machine/sys-

tem!

Types with deviating degrees of protection:1)

IP55 with brake (IP54 with manual release lever)

5.10 - 13Lenze | V03-en_GB-04/2015

Lenze Smart Motor m300Technical data

5.10

Rated data

Product key

MSEMA☐☐080-32MSEMA☐☐063-42Rated torque

5.001.75[Nm]MNStarting torque

20.07.00[Nm]MaSetting range

-2600 ... -500 / 0 / 500 ... 2600[r/min]n1Rated current

2.80 1)1.00 1)[A]IN2.30 2)0.80 2)

Rated power

1.360.47[kW]PNPower factor

0.99cos ϕEfficiency

73.065.0[%]η75 %Partial load

74.066.0[%]η100 %Full loadMoment of inertia

[kgcm²]JMass

12.55.90[kg]mMains voltage

3 AC 400 ... 480[V]UAC

400 V1)

480 V2)

Lenze | V03-en_GB-04/20155.10 - 14


5.10

Permissible radial and axial forces

ƒ Forces at medium speed 2000 r/min.

Application of forces

Application of force at l/2

Bearing service life L1050000 h30000 h20000 h10000 h

Fax,+Fax,-FradFax,+Fax,-FradFax,+Fax,-FradFax,+Fax,-Frad[N][N][N][N][N][N][N][N][N][N][N][N]

70-370350120-430410180-480470300-600600063

140-650570250-760670350-860770580-1090960080

Application of force at l

Bearing service life L1050000 h30000 h20000 h10000 h

Fax,+Fax,-FradFax,+Fax,-FradFax,+Fax,-FradFax,+Fax,-Frad[N][N][N][N][N][N][N][N][N][N][N][N]

70-370300120-430320180-480370300-600400063

140-650520250-760610350-860700580-1090880080

ƒ The values for the bearing service life L10 refer to an averagespeed of 2000 r/min. Depending on the ambient temperatures,the service life of the bearings is also reduced by the grease life-time.

ƒ Data for axial forces relate to themaximum radial forcewith thecorresponding bearing service life.

5.10 - 15Lenze | V03-en_GB-04/2015


5.10

Dimensions

MSEMA☐☐063-42

Design B3

Motor type

MSEMABR

Dimensions

40.0[mm]Δ LLength of motor options

Lenze | V03-en_GB-04/20155.10 - 16


5.10

Dimensions

MSEMA☐☐063-42

Design B5

Motor type

MSEMABR

Dimensions


5.10 - 17Lenze | V03-en_GB-04/2015


5.10

Dimensions

MSEMA☐☐063-42

Design B14

Motor type

MSEMABR

Dimensions


Lenze | V03-en_GB-04/20155.10 - 18


5.10

Dimensions

MSEMA☐☐080-32

Design B3

Motor type

MSEMABR

Dimensions


5.10 - 19Lenze | V03-en_GB-04/2015


5.10

Dimensions

MSEMA☐☐080-32

Design B5

Motor type

MSEMABR

Dimensions


Lenze | V03-en_GB-04/20155.10 - 20


5.10

Dimensions

MSEMA☐☐080-32

Design B14

Motor type

MSEMABR

Dimensions


5.10 - 21Lenze | V03-en_GB-04/2015


5.10

Surface and corrosion protection

Various surface coatings ensure that themotors operate reliably evenat high air humidity, in outdoor installation or in the presence of at-

For optimum protection of three-phase AC motors against ambientconditions, the surface and corrosion protection system (OKS) offerstailor-made solutions. mospheric impurities. Any colour from the RAL Classic collection can

be chosen for the top coat. The three-phase AC motors are alsoavailable unpainted (no surface and corrosion protection).

MeasuresApplicationsSurface and corrosion protec-tion systemOKS-G(primed)

•• 2K PUR priming coat (grey)Dependent on subsequent top coat applied

OKS-S(small)

••

Surface coating corresponding to corrosivity cat-egory C1 (subject to EN 12944-2)

Standard applications• Internal installation in heated buildings• Air humidity up to 90%

OKS-M(medium)

••


Internal installation in non-heated buildings• Covered, protected external installation• Air humidity up to 95%

OKS-L(high)

•

•


External installation• Air humidity above 95%

OKS-XL

• Blower cover andB end shield additionally primed

• Chemical industry plants(extra Large) •

•

Food industry

Screws zinc-coated• Cable glands with gaskets• Corrosion-resistant brakewith cover ring, stainlessfriction plate, and chrome-plated armature plate(on request)

Optional measures:• Motor recesses sealed off (on request)

Structure of surface coating

ColourSurface coatingCorrosivity categorySurface and corrosion protec-tion system

StructureDIN EN ISO 12944-2

Without OKS(uncoated)

2K PUR priming coatOKS-G(primed)

Standard: RAL 7012Optional: RAL Classic

2K-PUR top coatComparable to C1OKS-S(small)

2K PUR priming coat2K-PUR top coat

Comparable to C2OKS-M(medium)

Comparable to C3

OKS-L(high)OKS-XL(extra Large)

Lenze | V03-en_GB-04/20155.10 - 22


5.10

Motor connection

Lenze Smart Motor control connection and power connection

Terminal box

The Lenze Smart Motor can be connected via basic plug connectors(QUICKON for power connection, M12 for control connections). Thepower connection can alternatively be established in the terminalbox via screw connections using cable glands. The connections havebeen kept easily accessible from the fan side.

Top view of Lenze Smart Motor with plug connections

5.10 - 23Lenze | V03-en_GB-04/2015

Lenze Smart Motor m300Accessories

5.10

Connections via plug connectors

It is possible to change over between different speeds and directionsof rotation by means of the digital inputs of the twoM12 control

QUICKON plug-in connectors are used for the power connection.These plug-in connectors enable quick and clean connection of the

terminals. Up to5different speed states (e.g. creep speedandnormalmotors. The systemasawhole is easy to cablebymeansof a connect-speed in both directions as well as Stop) can therefore be chosen. Ining cable with QUICKON nuts. The different QUICKON nuts are

available as accessories. addition, the operating state is reported via a digital output. Theseterminals are taken out via twoM12 connectors.

Power connection X3 with QUICKON connector

Pin assignment

MeaningDesignationContact

1

2

3

PE

Mains connection phase L1L11



PE conductorPE4

Control connection X1 with M12-connector A−coded, pins

Pin assignment


n.c.1

Digital input 1DI22

Digital input groundGND-I3

Digital input 2DI14

Control connection X2 with M12-connector A−coded, pins

Pin assignment


24 V supply (DO1 supply)24 V1

Digital input 3 (reference X1;3 = GND-I)DI32

Digital output groundGND-O3

Digital output 1DO14

Connections via cable glands

Cable glands are provided for the connections. The connectionsthemselves are then accessible in the terminal box. The followingscrewed connections are available: :• M25x1,5 mm 2 for the mains cable• M25x2,5 mm 2 for the mains cable with pin-end connector• M12x1,5 mm 2 for the ext. brake resistor

Lenze | V03-en_GB-04/20155.10 - 24


5.10


The Lenze SmartMotors canbeequippedwith a spring-appliedbrake.This is activated after the supply voltage is shut down (closed-circuitprinciple). For applications with very high switching rates, a LongLifeversionof thebrakewith strengthenedbrakingmechanics is available.

Features

ControlVersions• Via internal electronics• Standard

- 1 x 106 repeating switching cycles • Holding brake, active when deenergised- 1 x 106 reversing switching cycles

Degree of protection• LongLife- 10 x 106 repeating switching cycles • IP55 without manual release- 15 x 106 reversing switching cycles • IP54 with manual release

Friction lining• Asbestos-free, low-wear

Options• Manual release

Assignment of 4-pole motors and brakes

Design

LongLifeStandard

Rated torqueSizeRated torqueSizeMotor frame size

BrakeBrake

MkMk

[Nm][Nm]

4.00064.0006063-42

8.00088.0008080-32

5.10 - 25Lenze | V03-en_GB-04/2015


5.10


Permissible friction energy

Q =Switching energy per switching cycleSh =Operating frequencyBrake size = 06 to 25

Lenze | V03-en_GB-04/20155.10 - 26


5.10


Rated data with standard braking torque

Size

0806Power input

0.0250.020[kW]PinBraking torque

8.004.00[Nm]MB100

7.203.70[Nm]MB1000

7.003.60[Nm]MB1200

6.803.50[Nm]MB1500

6.703.40[Nm]MB1800

6.303.20[Nm]MB2600Maximum switching energy

7.503.00[KJ]QE100

7.503.00[KJ]QE1000

7.503.00[KJ]QE1200

7.503.00[KJ]QE1500

7.503.00[KJ]QE1800

7.503.00[KJ]QE2600Transition operating frequency

50.079.0[1/h]ShüMoment of inertia

0.0610.015[kgcm²]JMass

1.500.90[kg]m

5.10 - 27Lenze | V03-en_GB-04/2015


5.10


Manual release lever

Brake

d12h5Δ kk5[mm][mm][mm][mm]

13.01072917806063

13.01162722408080

ƒ Not possible for manual release lever and terminal box to be insame position!

Lenze | V03-en_GB-04/20155.10 - 28


5.10

Brake resistors

The Lenze SmartMotor can be braked using ramp guidance. If a largeamount of regenerative energy occurs during this process, it needstobe takenupbyabrake resistor. In addition to abrake resistor (10W)mounted inside the terminal box, another brake resistor (20 W) canalso be connected externally alongside the terminal box via the ter-minal X4. These brake resistors are mounted and parameterised atthe factory.

MassThermal capacityRated powerRated resistanceProduct key

Brake resistorMotor

mCthPNRN[kg][KWs][kW][Ω]

0.05010010.0400MSEMA☐☐063-42MSEMA☐☐080-32 0.1725020.0390ERBU390R020W

Terminal box dimensions with external brake resistor

5.10 - 29Lenze | V03-en_GB-04/2015


5.10

NFC adapter

The settingsof the LenzeSmartMotor canbe specified/adjustedusinga smartphone or a PC. If the settings are to be made using a PC, thisis performed using the EASY Starter engineering tool (extended ver-sion, software licence "EASY Advanced" or "Engineer HighLevel" re-quired). Communication with the motor takes place via an NFC ad-apter. The connection to the PC is established via the USB interface.

NFC adapter

Product keyFeaturesMode

EZAETF001

Input-side voltage supply via USB connection onPC

NFC adapterDiagnostic LEDsHot-pluggable

Nuts for QUICKON connection

As counterparts the following 4 nuts can easily be fitted to the con-necting cable to ensure a fast and easy QUICKON connection. Nospecial tools are required for installation, only standard tools forstripping the insulation.

Product keyFeaturesMode

EWS0088For fast and easy connectionCable diameter: 6…10 mm

QUICKON nutEWS0089

For fast and easy connectionCable diameter: 9…14 mm

EWS0090For fast and easy connectionCan be connected and disconnected safely (safe to touch)

QUICKON connector with nutCable diameter: 6…10 mm

EWS0091For fast and easy connectionCan be connected and disconnected safely (safe to touch)Cable diameter: 9…14 mm

Lenze | V03-en_GB-04/20155.10 - 30


5.10

Easy setting

The Lenze Smart Motor is easy to set up for its intended applicationsusinganNFC-capable smartphoneor the familiar EASYStarter engin-eering tool. Both tools are suitable for entering speeds, directions ofrotation and start/stop functions in plain text. No special conversionsare necessary for the speeds. Engineering can really be this easy.

Setting via smartphone

The Lenze Smart Motor can be set up using an Android smartphone.The corresponding app (available in both German and English) canbe ordered via www.Lenze.com or downloaded via the Google Store.The data records created are also easy to archive on the smartphone,fromwhere they can then be reloaded to the Lenze Smart Motor forrepeat applications.

Setting via PC

The Lenze SmartMotor canbe set upusing the EASY Starter engineer-ing tool (extended version, software licence "EASY Advanced" or "En-gineer HighLevel" required). The software can easily be downloadedvia www.Lenze.com. Since the settings are very easy and clearlystructured, the Lenze Smart Motor also uses a basic dialog that canbe called up directly via the navigator. The corresponding button islocated directly in the navigation bar. Just like other product settings,the parameter values can be archived here.

5.10 - 31Lenze | V03-en_GB-04/2015


5.10

Lenze | V03-en_GB-04/20155.10 - 32


5.10

13449851

Lenze SEHans-Lenze-Straße 1D-31855 AerzenPhone: +49 (0)5154 82-0Telefax: +49 (0)5154 82 28 00

www.Lenze.com

Technology

Catalogue - Lenze Smart Motor