21

UV Curing Systems

UV Spot Curing UVSPOTUVSPOT is designed for operations that require fl exibility, high performance/very high intensity and reliability. Its optics/UV was engineered for maximum effi ciency in the delivery of UV energy through a light guide. Its design also ensures that not much heat will be transmitted. UV Spot has a lamp life expectancy of 2000hrs and a maximum intensity of 13,000mW/cm². Maintenance free and with slow degradation, it will have low lamp replacement rate. This results in good productivity and reliability in the production process.

Features• Long Lamp Life of 2000hrs The system is designed with an optimized cooling system and an effi cient optics design. This enables the lamp

to be cooled and maintain at a proper temperature for best performance. Degradation of the lamp is slow and gradual and even at 2000hrs signifi cant intensity can still be obtained from the lamp.

• Cool Light Output UV Spot has a specially designed IR fi lter that helps to cut off high percentage of IR from transmitting through the

light guide.• Timer Controlled Shutter UV Spot has a programmable shutter for user to vary or set a certain intensity value. This setting can be easily done

through the LCD interface. Values from 1 to 100% can be set.• Quick-change Lamp The unique feature of the system is in its quick changing of lamp. The lamp can be easily accessed by removing a

side panel just by loosening a single thumbscrew.

Specifi cationsLamp Rating 100WPower Supply 220VAC (110 VAC optional), 5A (max), solid stateLamp Life Up to 2000 hoursShutter ProgrammableIntensity >13,000mW/cm2 (as measured directly on a UV meter)Lamp Spectral Range 250-600 nmLight Delivery High Effi ciency Liquid Light Guide, Dual, Triple & Quad- Pole Light Guides with various lengths availableDimension (in cm) 27 (L) X 30 (H) X 13 (W)Weight 6.8 kg

Technodigm Catalogue.indd 21 7/3/12 10:09 AM

www.techno-digm.com

22

UV Point UVPUV Spot Curing system is a high performance compact light curing system. Maintenance free, it incorporates an ozone-free long life lamp and a highly effi cient refl ector for maximum output. The system is designed for convenience of use with any curing process as it is highly portable it is also suitable for use with conveyors.

Features• Long Lamp Life The lamp housing is designed to optimize airfl ow so that there is proper and adequate cooling of the lamp. This will

prevent hot spots and arc sputtering thus helping to maintain good life span for the lamp. The lamp is also designed with does not degrade sharply over time.

• Cool Light Output UV Point comes with a diachronic coated mirror, which refl ects only the usable UV wavelengths of light through the

light guide. IR, which is the main cause of heat, is thus minimized. This ensures that curing will be as cool as possible. Combined with an optional inline fi lter, heat transmitted to the substrate/material can be cut even further. This compares favorably to units in this class, which only uses inline fi lter thus resulting in high IR being transmitted.

• Timer Controlled Shutter UV Point has a simple and easy to use timer for the control of the shutter. The timer can be switched from auto to

manual for operator control of curing duration this is situated on the front panel for easy access.• Quick-change Lamp The unique feature of the system is in its quick changing of lamp. The lamp can be

easily accessed by removing a side panel just by loosening a single thumbscrew.

Specifi cationsLamp 100W Short Arc Mercury LampPower 90-265 VAC Solid State Switching Power SupplyLamp Life Up to 1000 hoursShutter Long Life Shutter with Return SpringIntensity 10W/cm2 (dependant on distance from substrate) Lamp Spectral Range 250-600 nmLight Delivery High Effi ciency Liquid Light Guide, Dual,Triple & Quad-Pole

Light Guides with various lengths availableDimensions (cm) 27 (L) X 30 (H) X 13 (W)Weight 6.8 kg

UV Conveyor UVC2000UVC2000 is a high intensity RF powered system which uses electrodeless lamp that is highly reliable and cost effective to use. These electrodeless lamps have high effi ciency and good performance with a long working life thus providing more stability to curing of UV adhesive and epoxies.The lamp module incorporates a highly elliptical refl ective refl ector that combines well with the lamp to provide a high peak of UV irradiance. This high peak irradiance provides more effi cient and faster curing with relatively low infrared emission. Start up time is short (less than a minute). A standby mode is provided for even faster start up. As a system, UVC2000 is easy to use and incorporate into production lines without much effort. Features• High intensity, Fast curing• Long lamp life• Low Maintenance• 4000W System is also available• Available in table top or fl oor standing version

Specifi cationsLamp 2000W (max.)Lamp type 6” ElectrodelessPower 220VAC, 50/60Hz, 20Amps, Single PhaseIntensity 600mW/cm² UVACuring Width 156mmBelt Width 240mmDimension (cm) 165 (L) X 140 (H) X 56 (W)

Technodigm Catalogue.indd 22 7/3/12 10:09 AM

www.techno-digm.com

23

UV Bench Top Conveyor UV6UV6 is a bench top or stand mounted light curing system, designed for laboratory or high volume production applications. The conveyor features a quiet variable speed motor, with a velocity regulating drive that keeps the belt speed constant for varying loads. The system can be confi gured with single or dual high intensity lamp heads UVMR400, UVR600 or UVR800, which can be easily removed and reconfi gured as stand mounted systems for increased versatility.

Features• Adjustable Lamp Height

Lamp height can be adjusted from 1.5 to 5 inches• Full UV Shielding

The conveyor light chamber is totally enclosed, shielding the operator and passersby from any UV radiation. The light chamber entrance and exit are protected by sliding doors with extended hoods.

• Adjustable End ChuteThe system has an adjustable position and chute for accumulating cured parts as they exit the conveyor.

• Exhaust PortThe light chamber has a top-mounted 3” diameter port, for optional venting to facility exhaust systems.

LampUVR 800 UVR 400 / 600 UVMR 400

Single Dual Single Dual Single Dual

Input Power 220VAC, 50 / 60Hz

Belt Width 9”

Belt Speed 0.7 - 19.6fpm (20 - 600km / min)

Curing Width 6” 6” 4”

Dimension (Include blower)

40” (100cm) L 51” (300cm) L 40” (100cm) L 51” (300cm) L 32” (80cm) L 40” (100cm) L

26” (66cm) W 26” (66cm) W 26” (66cm) W 26” (66cm) W 26” (66cm) W 26” (66cm) W

22” (56cm) H 22” (56cm) H 22” (56cm) H 22” (56cm) H 22” (56cm) H 22” (56cm) H

UV Ray UVR400/600UVR400/600 is a compact UV curing system which integrates all components into one lamp head. UVR400/600 is designed as a table top as well as conveyor system. It can be easily mounted on any conveyor system without cabling or remote control boxes.

Features• High intensity, fast curing• Two level intensity selection (100 and 50%)• Lamp Hour Counter Specifi cationsLamp 400/600W Metal Halide LampPower 220 VAC, 50/60HzIntensity 200mW/cm2 UVA light (320-390 nm)Cure Area 14 X 17 cmDimensions 255 X 270 X 160 mm

Technodigm Catalogue.indd 23 7/3/12 10:09 AM

www.techno-digm.com

24

UV Ray UVR800UVR800 UV curing system is ideal for use in the electronic, medical and general industry. It is designed for conveyor system with a lamp rating of 800 watts that will provide a relatively fast curing rate. The system is also easy to use and install.

Features• High intensity, fast curing• Two level intensity selection (100 and 50%)• Lamp Hour Counter

Specifi cationsLamp Rating 800W Metal Halide LampPower 220 VAC, 50/60HzIntensity >250mW/cm² UVA light (320-390 nm)Cure Area 15 X 18 cmDimensions: Control Box 248 X 298 X 100 mm Lamp Housing 254 X 260 X 160 mm

UV Mini Ray UVMR400The UV Mini Ray 400 is a portable or low production UV curing system. Because of its versatility, it can handle a variety of UV curing applications. The unit features a removable head, which serves as a handheld curing lamp during operation. Due to its simple yet high-tech design, the Mini Ray is extremely user-friendly and reliable, requiring virtually no learning curve or setup time.

Features• High intensity, fast curing• Two level intensity selection (100 and 50%)• Lamp Hour Counter

Specifi cationsLamp 400W Metal Halide LampPower 220 VAC, 50/60HzIntensity 500mW/cm² UVA light (320-390 nm)Cure Area 8 X 13 cmDimensions (mm) 203 X 127 X 149 mm (Lamp Housing Only)

UV Flood UVF400/600UV Flood Curing System is a high performance, high intensity compact light curing system. Maintenance free, it incorporates an ozone-free long life lamp and a highly effi cient refl ector for maximum output. The system is designed for convenience of use with any curing process as it is highly portable. It is also suitable for use with conveyors.

Features• High Output Intensity • Microprocessor Control • Lamp Intensity Setting • Exposure Time Setting • Safety • LCD Display

Specifi cationsLamp 400/600W Metal Halide LampPower 90-265 VAC, Auto RangingLamp Life Up to 1000 hoursShutter Integrated FlexibleLamp Spectral Range 250 to 650 nmCure Area 20 X 15 cmDimensions (in cm) 28 (L) X 25 (H) X 22 (W)Weight 6.8 kg

Technodigm Catalogue.indd 24 7/3/12 10:09 AM

www.techno-digm.com