View
2
Download
0
Category
Preview:
Citation preview
1+1.562.906.9300 | www.agsecorp.com | sales@agsecorp.com
Fan Stator Shipping StandEngine OEM P/N: 11C3004P02-PPK
AGSE P/N: AGSE-C069-G02
Full Engine/Propulsor Shipping StandEngine OEM P/N: 11C4319P01AGSE P/N: AGSE-E215-G01
AGSE ™ is a global leader in the original design, development, and manufacture of qualified & recommended solutions for the handling of the GEnx-2B high-bypass turbofan engine:
• Shipping Stands• Engine Covers• Lifting Fixtures
• Shipping Containers• Site Transport• Pedestals
Full Engine/Propulsor Shipping StandEngine OEM P/N: 11C4300P02AGSE P/N: AGSE-E175-G03
Approved by GE Aviation!
OEM-APPROVED GSE & TOOLING FOR
GEnx-2B ENGINESUSED ON BOEING 747 AIRCRAFT
2+1.562.906.9300 | www.agsecorp.com | sales@agsecorp.com Approved, qualified, and recommended by GE Aviation for the handling of the GEnx-2B engine.
OEM-APPROVED FOR THE GEnx-2B ENGINEPROPULSOR SHIPPING STANDS
• Air/Truck Transport or Storage for propulsor*
• Tie-Down Rings on Transportation Base offer secure retainment for both engine & Shipping Stand
• Shock-Absorbing Mounts reduce vibrations during transport
• Select models:• Transport full engines on specialized large
freighter aircraft*
• Provide Bootstrap Capability to support engine during removal/installation from/on aircraft
• Roll-Over to achieve minimum height & width to pass through side cargo door of aircraft
• Include optional Air-Operated Pneumatic Pump (-PPK) to raise/lower Shipping Cradle
Our trusted & reliable Shipping Stands not only offer the lowest total cost of ownership, but superior functionality that
can benefit any airline, aircraft hangar, or engine shop:
PROPULSOR SHIPPING STANDS BY PART NUMBER
Engine OEM AGSE
PART NUMBER:
PROPULSOR CAPABLE OF SHIPMENT
ON MAIN DECK(S) OF FREIGHTER AIRCRAFT*
TRANSPORT/ STORAGE FOR FULL ENGINE
BOOTSTRAP CAPABLE
ROLL-OVER SHIPPING CRADLE
HYDRAULIC SYSTEM WITH PNEUMATIC POWER OPTION
(-PPK)
STACKABLE WHEN EMPTY
COMPATIBLE WITH OTHER AGSE EQUIPMENT:ACCOMMODATES
OTHER SELECT ENGINES
PROTECTIVE COVERS
LIFTING FIXTURES
SHIPPING CONTAINERS
SITE TRANSPORT
SHIPPING STAND OPTIONS
11C4319P01 AGSE-E215-G01 Boeing 747, 767 & 777
11C4499 (Full Engine) for air shipment only
11C4484P03 (Engine Sling)
11C4467P01 (Accessories) for separate/concurrent shipment
11C4348P01 (Fan Case Transfer Dolly)
11C4510P01 (Manual Jacking Leg System)AGSE-V133-G03 (Accessory Drive System)
11C4300P02 AGSE-E175-G03
Boeing 747, 767 & 777 Douglas DC-10 & MD-11
11C4388 (Full Engine)11C4389 (Propulsor)
11C4484P03, 11C4542P01, AGSE-L018-G02 (Engine Slings)
11C4348P01 (Fan Case Transfer Dolly)
11C4347 (Fan Case Support Ring)11C4510P01 (Manual Jacking Leg System)11C4628 (Ground Handling Bracket Set)
11C4349P01 AGSE-E176-G03 Ground Shipment Only
11C4388 (Full Engine)11C4389 (Propulsor)
11C4484P03, AGSE-L018-G02 (Engine Slings)
11C4348P01 (Fan Case Transfer Dolly)
9446M34P01 AGSE-E196-G01 Ground Shipment Only
9446M34P02 (Pneumatic Tire Dolly)9446M34P03 (Shop Dolly)
GEnx-1B
*AGSE Shipping Stands are designed and built in compliance with the specifications and requirements of the engine’s original equipment manufacturer (OEM). The customer is solely responsible for selecting the appropriate packaging based upon all information at his/her disposal, including the specific application, regulatory compliances, product compatibility, shipping requirements, and documentation issued by the Engine OEM. Any AGSE-referenced shipping information presented either in this product literature or other AGSE documentation is intended as general guidance only and should not be considered a complete set of shipping requirements that can alter, satisfy, or influence both regulatory and Engine OEM shipping requirements. The content found in AGSE marketing materials and other documentation is subject to change; AGSE accepts no liability for loss or damage resulting from changes, errors, omissions, or misinterpretations of these AGSE publications.
= Available Feature
3+1.562.906.9300 | www.agsecorp.com | sales@agsecorp.com
FAN STATOR SHIPPING STANDS BY PART NUMBEREngine OEM
AGSE PART
NUMBER:CAPABLE OF SHIPMENT ON MAIN DECK(S)
OF FREIGHTER AIRCRAFT* COMPATIBLE WITH OTHER AGSE EQUIPMENT: ACCOMMODATES OTHER SELECT ENGINES
11C3004P02-PPK AGSE-C069-G02
Boeing 747 & 777 Douglas DC-10 & MD-11
11C4348P01 (Fan Case Transfer Dolly) for site transport
GEnx-1B
11C4572P01 AGSE-C084-G01
Boeing 747 & 777 Douglas DC-10 & MD-11
11C4348P01 (Fan Case Transfer Dolly) for site transport
GEnx-1B
Approved, qualified, and recommended by GE Aviation for the handling of the GEnx-2B engine.
OEM-APPROVED FOR THE GEnx-2B ENGINEFAN STATOR SHIPPING STANDS
• Air/Truck Transport or Storage for fan stator*
• Palletized Base Frame enables loading/unloading into/from aircraft
• Tie-Down Rings offer secure retainment to Truck Trailer as well as Shipping Stand rotation via overhead hoists
• 11C3004P02-PPK (AGSE-C069-G02) model includes Air-Operated Pneumatic Pump (-PPK) for Shipping Stand rotation
The dependability, efficiency, and versatility of our Shipping Stands extend to the handling of major modules as well:
Tie-Down Rings
Fan Case Mounting Plate
Manually-Operated Hand Pump
Ring Support Rotation
Outlet Guide Vane Support Ring
Palletized Base Frame
Fan Stator Shipping Stand Engine OEM P/N: 11C4572P01 AGSE P/N: AGSE-C084-G01
*AGSE Shipping Stands are designed and built in compliance with the specifications and requirements of the engine’s original equipment manufacturer (OEM). The customer is solely responsible for selecting the appropriate packaging based upon all information at his/her disposal, including the specific application, regulatory compliances, product compatibility, shipping requirements, and documentation issued by the Engine OEM. Any AGSE-referenced shipping information presented either in this product literature or other AGSE documentation is intended as general guidance only and should not be considered a complete set of shipping requirements that can alter, satisfy, or influence both regulatory and Engine OEM shipping requirements. The content found in AGSE marketing materials and other documentation is subject to change; AGSE accepts no liability for loss or damage resulting from changes, errors, omissions, or misinterpretations of these AGSE publications.
Operational convenience from top to bottom!
4+1.562.906.9300 | www.agsecorp.com | sales@agsecorp.com
PROTECTIVE COVERSLasting protection against dirt, water, and contamination!
PART NUMBER: Engine OEM PROVIDES PROTECTION FOR: COMPATIBLE WITH
OTHER AGSE EQUIPMENTPROVIDES PROTECTION DURING:
AIR SHIPMENT GROUND SHIPMENT SITE TRANSPORT
11C4499 Full Engine 11C4319P01 (Propulsor Shipping Stand)
11C4388 Full Engine 11C4300P02, 11C4349P01 (Propulsor Shipping Stand)
11C4389 Propulsor 11C4300P02, 11C4349P01 (Propulsor Shipping Stand)
11C4310 Fan Case
11C4382 Stage 1 Fan Disk
Approved, qualified, and recommended by GE Aviation for the handling of the GEnx-2B engine.
OEM-APPROVED FOR THE GEnx-2B ENGINESHIPPING STAND ACCESSORIES &
PROTECTIVE COVERS
SHIPPING STAND ACCESSORIESImprove safety & productivity for either propulsor or fan stator transport and maintenance!
Engine OEM AGSE
PART NUMBER: DESCRIPTION CONSISTS OF:
MAXIMUM LOAD
CAPACITYCOMPATIBLE WITH
OTHER AGSE EQUIPMENT SPECIFIC FUNCTIONACCOMMODATES
OTHER SELECT ENGINES
11C4510P01 AGSE-E18412-S01/-S02
Manual Jacking Leg (48" 122 cm Alternate Stand Lift System)
Four {4} Jacking Leg Assemblies • Two {2} Left-Hand • Two {2} Right-Hand
11C4300P02, 11C4319P01 (Propulsor Shipping Stands)
11C4467P01 (Shipping Container) for storage
Eliminates need for forklift, crane, or engine sling when loading Propulsor Shipping Stand with propulsor installed onto trucks, pallet dollies, or loaders
GEnx-1B
11C4628 Forward Propulsor Ground Handling Bracket Set
Two {2} Brackets • Left-Hand • Right-Hand
11,550 lbs 5,239 kg (per set)
11C4300P02 (Propulsor Shipping Stand)
11C4323 (Engine Sling)
11C4251 (Pedestal Set)
Supports full engine (via attachment to Fan Hub Frame) during transportation or maintenance
GEnx-1B
11C4347 Forward Fan Case Support Ring One {1} Ring with Seven {7} Mounting Pads
11C4300P02 (Propulsor Shipping Stand)
11C4348P01 (Fan Case Transfer Dolly)
Supports Fan Stator (via attachment on forward flange of Forward Fan Case) during transportation or maintenance
AGSE-V133-G03 Accessory Drive System
• Adjustable-Height Cart with Casters • Control Pendant • Drive Shaft • Motor Assembly • Motor Control Unit
11C4319P01 (Propulsor Shipping Stand)
Rotates Shipping Cradle to meet minimum height & width requirements to clear side door on freighter aircraft
GEnx-1B, Trent
= Available Feature
5+1.562.906.9300 | www.agsecorp.com | sales@agsecorp.com
LIFTING FIXTURES BY PART NUMBEREngine OEM
AGSE PART
NUMBER: DESCRIPTION MAXIMUM LOAD CAPACITY
COMPATIBLE WITH OTHER AGSE EQUIPMENT
CENTER OF GRAVITY ADJUSTMENT FEATURE
OPTIONAL ACCESSORIES
ACCOMMODATES OTHER SELECT ENGINES
11C4542P01 AGSE-L033-G01
Lift Beam Set (of 2)
22,000 lbs 9,979 kg (Per Beam)
11C4300P02 (Propulsor Shipping Stand) GEnx-1B
11C4484P03 AGSE-L038-G03 Engine Sling 32,000 lbs
14,515 kg11C4300P02, 11C4319P01, 11C4349P01 (Propulsor Shipping Stands)
Lifting Ring via Manual Tool (Side-to-Side)
Adjustable Length Aft Cables (Forward & Aft)
Shipping/Storage Container GEnx-1B, Trent
AGSE-L018-G02 Engine Sling 30,000 lbs 13,608 kg
11C4300P02, 11C4349P01 (Propulsor Shipping Stands)
Lifting Ring via Manual Tool (Side-to-Side)
Adjustable Length Aft Cables (Forward & Aft)
GEnx-1B, Trent
11C4648P01 AGSE-L043-G03 Engine Sling 25,000 lbs
11,340 kg
Lifting Ring via Manual Tool (Forward & Aft)
Adjustable Length Forward Turnbuckles (Side-to-Side)
Shipping/Storage Container GEnx-1B
11C4647P01 AGSE-L043-G02 Engine Sling 25,000 lbs
11,340 kg
Lifting Ring via Manual Tool (Forward & Aft)
Adjustable Length Forward Turnbuckles (Side-to-Side)
Shipping/Storage Container
11C4323 Engine Sling 16,000 lbs 7,257 kg
11C4628 (Ground Handling Bracket Set) Hand Crank Extension GEnx-1B
Approved, qualified, and recommended by GE Aviation for the handling of the GEnx-2B engine.
OEM-APPROVED FOR THE GEnx-2B ENGINELIFTING FIXTURES
Stable overhead support for horizontal build-up or engine transfer to or from Shipping Stands!
Engine SlingEngine OEM P/N: 11C4648P01 AGSE P/N: AGSE-L043-G03
Forward Beam
Hand Crank for Forward & Aft Beam Adjustment
Lifting RingAft Beam
Shackle Hoist Rings
6+1.562.906.9300 | www.agsecorp.com | sales@agsecorp.com
SHIPPING CONTAINERS BY PART NUMBER
Engine OEM AGSE
PART NUMBER:
SHIPPING CONTAINER DESCRIPTION
SELECT MODULES/COMPONENTS SUPPORTED IN SHIPPING
CONTAINERCOMPATIBLE WITH
OTHER AGSE EQUIPMENTREMOVABLE WATERTIGHT COVER
FOR PROTECTION AGAINST CONTAMINATION & DAMAGE
SHOCK-ABSORBING MOUNTS
ACCOMMODATES OTHER SELECT
ENGINES
11C4678P01 AGSE-E257-G01 Super Core Module
• Booster • Fan Frame • High Pressure Compressor • Combustor Diffuser Nozzle • High Pressure Turbine • Turbine Center Frame
11C4671 (Pneumatic Tire or Shop Dolly)
9446M34P02 (Pneumatic Tire Dolly)
9446M34P03 (Shop Dolly)
GEnx-1B
11C4683P01 AGSE-C119-G01 Core Module
• High Pressure Turbine • High Pressure Compressor • Turbine Center Frame
GEnx-1B
11C4306P01 AGSE-C083-G01 Split Engine Components
• Acoustic Panels • Bifurcation Assembly • Fan Blades • Spinner
11C4467P01 AGSE-C082-G01 Accessories
• Caster Mount Assembly • Caster Steering Bars • Jacking Leg Assemblies • Shock Mount Assemblies • Tow Bar Assembly
11C4319P01 (Propulsor Shipping Stand) for separate/concurrent shipment
11C4510P01 (Manual Jacking Leg System) for storage
Approved, qualified, and recommended by GE Aviation for the handling of the GEnx-2B engine.
OEM-APPROVED FOR THE GEnx-2B ENGINESHIPPING CONTAINERS
Fully enclosed to shield major modules against contamination and damage during split engine transport!
Core Module Shipping ContainerEngine OEM P/N: 11C4683P01
AGSE P/N: AGSE-C119-G01
Split Engine Components Shipping ContainerEngine OEM P/Ns: 11C4306P01 AGSE P/Ns: AGSE-C083-G01
= Available Feature
7+1.562.906.9300 | www.agsecorp.com | sales@agsecorp.com Approved, qualified, and recommended by GE Aviation for the handling of the GEnx-2B engine.
OEM-APPROVED FOR THE GEnx-2B ENGINESITE TRANSPORT
Full Engine, Propulsor, or Super Core Shop DollyEngine OEM P/N: 11C4671
Propulsor Shop DollyEngine OEM P/Ns: 11C4348P01 AGSE P/Ns: AGSE-E177-G03
SITE TRANSPORT BY PART NUMBEREngine OEM
AGSE PART
NUMBER: DESCRIPTION COMPATIBLE WITH OTHER AGSE EQUIPMENT
DISASSEMBLES/FOLDS TO REDUCE SHIPPING/STORAGE
VOLUME
PNEUMATIC TIRES TO ENABLE
LONG-RANGE MOBILITY
MANUALLY-ADJUSTABLE
HEIGHT
REQUIRES MANUAL
MOVEMENTACCOMMODATES
OTHER SELECT ENGINES
11C4671Full Engine, Propulsor, or Super Core Pneumatic Tire or Shop Dolly
11C4678P01 (Super Core Shipping Container) 1 GEnx-1B
9446M34P02 AGSE-E197-G02 Propulsor Pneumatic Tire Dolly
9446M34P01 (Propulsor Shipping Stand)
11C4678P01 (Super Core Shipping Container)
GEnx-1B
9446M34P03 AGSE-E197-G01 Propulsor Shop Dolly
9446M34P01 (Propulsor Shipping Stand)
11C4678P01 (Super Core Shipping Container)
GEnx-1B
11C4348P01 AGSE-E177-G03 Fan Case Transfer Dolly
11C4300P02, 11C4319P01, 11C4349P01 (Propulsor Shipping Stands)
11C3004P02-PPK, 11C4572P01 (Fan Stator Shipping Stands)
11C4347 (Fan Case Support Ring)
1Not Applicable to Shop Dolly
= Available Feature
Exceptional engine transport within a facility or between local sites!
8+1.562.906.9300 | www.agsecorp.com | sales@agsecorp.com Approved, qualified, and recommended by GE Aviation for the handling of the GEnx-2B engine.
OEM-APPROVED FOR THE GEnx-2B ENGINEPEDESTAL SETS & FAN TOOLING
FAN TOOLINGImprove safety & productivity for major module maintenance!PART NUMBER:
Engine OEM DESCRIPTION COMPATIBLE WITH OTHER AGSE EQUIPMENT SPECIFIC FUNCTION ACCOMMODATES
OTHER SELECT ENGINES
11C3272 Fan Stator/Fan Hub Guide Pin Set (of 16) Aligns Fan Stator Outlet Guide Vane (OGV) Blades with Fan Hub GEnx-1B
11C3403 Fan Blade/Fan Case Taper Gage Set (of 5) Measures Fan Blade Tip clearance F1.5 at 6 o'clock location GEnx-1B
11C4307 Fan Case Runout Measurement Fixture Measures Fan Case full indicator reading at 144.123, 148.567, and 153.011 locations
11C3323 Stage 1 Fan Blade Spacer Removal Hydraulic Tool Removes Fan Blade Spacers from Stage 1 Fan Blades GEnx-1B
11C3398 Stage 1 Fan Blade Spacer Removal Tool Removes Fan Blade Spacers from Stage 1 Fan Blades GEnx-1B
11C4616 Fan Inlet Personnel Stand 11C4514 (Fan Stator Protective Set)
Enables removal/installation of Fan Stator from/on Propulsor by providing flat, elevated surface to access upper bolts and acoustic panels GEnx-1B
11C4514 Fan Stator Protector Set 11C4616 (Fan Inlet Personnel Stand) Protects Fan Case during module assembly process GEnx-1B
11C4397 Fan Forward Acoustic Liner-Protector Protects Inner Forward Fan Case during maintenance
PEDESTAL SETSAnother ideal horizontal build-up solution that achieves ergonomically efficient engine centerline heights!
PART NUMBER: Engine OEM
MAJOR MODULE(S) SUPPORTED
NUMBER OF PEDESTALS REQUIRED
MAXIMUM LOAD
CAPACITY (PER SET)
SUPPORTS SELECT MODULES WHEN USED IN CONJUNCTION WITH OTHER PEDESTALS:
COMPATIBLE WITHOTHER AGSE EQUIPMENT
MAIN ENGINE (configuration options below)
MAIN ENGINE WITHOUT LOW PRESSURE TURBINE MODULE
(configuration options below)CORE MODULE WITH
LOW PRESSURE TURBINE MODULE
CORE MODULE WITHOUT LOW PRESSURE TURBINE MODULE
(configuration options below) FAN MODULE
#1 #2 #3 #4 #5 #1 #2 #1 #2
11C4251
Turbine Rear Frame 2 8,000 lbs 3,629 kg
Fan Hub Frame 2 10,000 lbs 4,536 kg
11C4628 (Ground Handling Bracket Set)
Turbine Center Frame 2 8,000 lbs 3,629 kg
Forward Fan Case 2 10,000 lbs 4,536 kg
Aft Fan Case 2 10,000 lbs 4,536 kg
Does Not Support a Specific Module 1 6,600 lbs
2,994 kg
= Available Feature
©2022 AGSE-Westmont Industries. All rights reserved. R.1.7.22
Recommended