© 2012 Autodesk Adding Instrumentation and Electrical Capabilities to Autodesk® Plant Design Suite...

© 2012 Autodesk

Adding Instrumentation and Electrical Capabilities to Autodesk® Plant Design SuiteAndy Bonfield

© 2012 Autodesk

Class Summary

In this class, we will provide an introduction to the Elecdes Design Suite instrumentation and electrical design tools, with a particular emphasis on their integration with Autodesk Plant Design Suite software.

© 2012 Autodesk

Learning Objectives

At the end of this class, you will be able to:

Add and link components in an instrumentation database Synchronize Instrument Manager with AutoCAD® P&ID Produce output drawings and reports Create cable trays and route cables on a 3D model

© 2012 Autodesk

Instrument ManagerAdding and Linking Components

© 2012 Autodesk

Producing Drawings and Reports

© 2012 Autodesk

Synchronizing Instrument Manager with AutoCAD® P&ID

© 2012 Autodesk

Creating Cable Trays on a 3D Model

© 2012 Autodesk

Cable Routing

© 2012 Autodesk

Questions & Answers

To contact me:

Andy BonfieldSCADA SystemsL6, 126 Vincent StAucklandNew Zealand

+64 9 377 6781 andy.bonfield@elecdes.com www.elecdes.com

© 2012 Autodesk

Autodesk, AutoCAD* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved.