เทคโนโลยีใหม่ Magnetic Measurement System และ Encoder

Preview:

DESCRIPTION

COMPOMAX. เทคโนโลยีใหม่ Magnetic Measurement System และ Encoder. โดย สังข์ขีด หนูสุข. LINEPULS Magnetic Measuring Systems. LINEPULS Magnetic Measuring Systems. ระบบการวัดโดยอาศัยหลักการของสนามแม่เหล็ก. Magnetic Measurement System. LINEPULS Magnetic Measuring Systems. - PowerPoint PPT Presentation

Citation preview

เทคโนโลยี�ใหม่� Magnetic Measurement

Systemและ

Encoder

COMPOMAX

โดยี สั�งข์�ข์�ด หน�สั�ข์

LINEPULS Magnetic Measuring Systems

ระบบการวั�ดโดยีอาศั�ยีหล�กการข์องสันาม่แม่�เหล�ก

Magnetic Measurement System

LINEPULS Magnetic Measuring Systems

LINEPULS Magnetic Measuring Systems

• The resulting signals are interpolated to obtain the required resolution (PPR/mm)

• The same principle is also suitable to rotary transducers (circular magnets)

• The system is composed by a magnetic tape with alternated north-south poles

• A sensor, sensitive to magnetic fields, moves contactless along the tape

• The sensor converts the magnetic field in a sinusoidal electric signal

• With 2 sensors in phase delay of a 1/4 of period a sin + cos signal is obtained

MTxx magnetic tape forincremental measurements

• in plastic and steel

• temperature coefficient: 11±1 μm/k

• several polar pitches available

• accuracy classes: ±100 μm/m, ±50 μm/m, ±10 μm/m

• roll lenghts: up to 100 m

LINEPULS Magnetic Measuring Systems

SME5 general purpose sensor with integrated converter

• resolution from 5 to 50 µm

• speed 16 m/s max.

• real-time output signals

• max. gap tape-sensor: 2,0 mm

• system composition: SME5 + MT50 + display or counter

LINEPULS Magnetic Measuring Systems

LINEPULS Magnetic Measuring Systems

SME1 high resolution sensor for feedback applications

• resolution from 25 to 1 µm

• max. counting frequency 3 Mhz

• max. gap tape-sensor 0,4 mm

• max speed 3 m/s

• system composition: SME1 + MT10 + display

• linear motors

• tool machines

• measuring equipment

• microelectronics, IC industry

• compatible with Siko’s MSK100

LINEPULS Magnetic Measuring Systems

SME1 high resolution sensor for feedback applications

MRI standard magnetic

rings

• AB,/AB output signals• suggested sensors : SME2,

SME5• accuracy up to 0,15• small standard rings with

hollow shaft support• different sizes available

LINEPULS Magnetic Measuring Systems

• for rotary measurements with magnetic sensors

LINEPULS Magnetic Measuring Systems

MRI standard magnetic

rings

MRI customer specific rings

• up to 500 mm• 1 or 2 tracks possible• accuracy up to 0,15• initial design cost for prototypes• convenient for special applications

LINEPULS Magnetic Measuring Systems

SMK universal sensor with integrated converter

LINEPULS Magnetic Measuring Systems

• resolution from 1 to 0.01 mm

• travel speed: 2.5 m/s max.

• max. gap tape-sensor 4,0 mm

• burst output (<20 kHz real-time)

• system composition: SMK + MT50 + display or counter

LINEPULS Magnetic Measuring Systems

SMK universal sensor with integrated converter

• simple machines

• low precision machines

• special resolutions

• Stock types available

Reference pole R for SME5 SME2 SME1 SMS

• fixed reference along the magnetic tape

• reference signal detected by the sensor

• led indication• pole support LKM-1309/xx• multiple reference possible• easy position adjustment

LINEPULS Magnetic Measuring Systems

LINEPULS Magnetic Measuring Systems

SMB2 small sensor with external converter

• when a small sensor is needed

• converter can fit into cable-rail

• settings can not be changed

SMx sensors with separate converter

LINEPULS Magnetic Measuring Systems

• travel speed: 16 m/s max

• Mini-Din connections

• system compositions:

SM5(SM2) + MT50(MT20) + display

SM5 + MT50 + E-BOX

SM5 + MT50 + LD120

SM25 +MT25 + LD140

SMx sensors with separate converter

• To be used with E-box and LDxxx displays

• where small size is a must

LINEPULS Magnetic Measuring Systems

EBOX external converter for SMx sensors

LINEPULS Magnetic Measuring Systems

• programmable resolution and output

• resolutions 50-25-20-12,5-10 µm

• accuracy as per magnetic tape MT50

• IP40

• connections: D-sub 9 pin

LD140 battery LCD display

LINEPULS Magnetic Measuring Systems

• 6 digits, standard display features

• battery power supply: 1,5 v

• resolutions 0.01, 0.05, 0.1, 1 mm

• measurement speed: <10 m/s max.

• use with SM25 sensor + MT25 tape

• RS232, 3 offsets, 360° display

• fractional inch display

• woodworking machines

• metalcutting machines

• digital calipers

• round tables (360°setup)

• measuring equipment

• new SW since march 2006

• equivalent to Elgo’s Z16

LINEPULS Magnetic Measuring Systems

LD140 battery LCD display

LINEPULS Magnetic Measuring Systems

LD140 battery LCD display

• OEM version

• to be used with MT25 and SM25

• all software features like LD140

• fixed connection SM25-R sensor

• customer can fit the unit into his own housing/machine part

LINEPULS Magnetic Measuring Systems

LD142 battery LCD display with SM25 sensor

• connected to SM25-R sensor

• all software features like LD140

• stock item LD142-M7-R-0,3

SMA5 absolute magnetic sensor

• up to 5 m measuring length• integrated SSI interface• 0,005 mm resolution• zero setting function• complementary function• IP67• to be used with MTA

magnetic tape

LINECOD Magnetic Measuring Systems

LINECOD Magnetic Measuring Systems

SMA5 absolute magnetic sensor

• insensitive to power outages

• safe measurement system

• linear motors

• tool machines

• measuring equipment

• compact design

MTA5 absolute magnetic tape

• in plastic and steel

• absolute magnetic coding

• accuracy class ±50 μm/m

• temperature coefficient: 11±1 μm/k

• lenght available: up to 5.1 m

LINECOD Magnetic Measuring Systems

MC221 – 2 axis display

POSICONTROL - Displays

• compact 96 x 96 x 72 mm

• 6 digits LED

• 2 x AB inputs

• counting frequency 90 kHz

• power: 24Vdc, 24Vac, 115Vac, 230Vac

• 2 outputs x 24 V relay (O2)

• RS232 interface

• for 2 sensors/encoders simultaneously

LD200: Universal programmable display

• 96 x 48 x 69 mm• 8 digits, LED 10 mm• power supply: 18Vac, 24Vdc

20%• Max. 500 kHz counting

frequency• inputs: AB0, SSI, 1Vpp, SMx

sensor• RS232 interface• 3 x 24V digital outputs @ 50mA• IP54 protection (when mounted)

• universal usage, ideal as stock unit• easy set-up (intelligent menue) • easy connection with block terminals and Dsub conn. • very compact, with mounting clips

POSICONTROL Displays

possible device typesE_IncrPP,LD (A, B, 0)

E_1VppSIN/COS 1Vpp

E_SSIabsolute SSI

M_SensLika magnetic sensors

SM2, SM25, SM5

M_IncrPP, LD (A, B, O)

M_1VppSIN/COS 1Vpp

M_SSIabsolute SSI

POSICONTROL Displays

LD200

เทคโนโลยี�สัม่�ยีใหม่�ข์อง

Encoder

ROTAMAG Magnetic encoders

ROTAMAG Magnetic encoders

MA58 MA58S MAC58 absolute magnetic encoder

• For high shock and moisture conditions

• Based on the AS58, AS58S, ASC58 housing

• 12 bits x 16 bits max. • SSI or BISS output interface• Operating temperature

-25°C÷+85°C max• IP67

www.lika.bizwww.lika.biz

Recommended