View
219
Download
0
Category
Preview:
Citation preview
8/13/2019 0001500690
http://slidepdf.com/reader/full/0001500690 1/3
SAP Note
Header Data
Symptom
You want to use transaction SAINT to install an add-on.
Other Terms
SAINT, add-on, installation, GRCPIERP, V1000_700, SAPK-103AGINGRCPIERP, CD<51039481>
Reason and Prerequisites
You want to install an add-on for SAP NetWeaver 7.0 (optionally with Enhancement Package 1 or 2).
You want to install an add-on for SAP ERP 6.0 or any further EHPIs
Solution
This note is updated on a regular basis. Make sure you have the current version of this note before you start theinstallation.
Contents1. Change history 2. Prerequisites for installing the GRCPIERP V1000_700 3. Release of GRCPIERP V1000_700 with Enhancement Packages
4. Preparing the GRCPIERP V1000_700 installation 5. Executing the GRCPIERP V1000_700 installation 6. After the installation of GRCPIERP V1000_700 7. Language support 8. Password
1. Change history
2. Prerequisites for installing the GRCPIERP V1000_700
l It is not possible to uninstall GRCPIERP.Before you install the GRCPIERP, keep in mind that you cannot uninstall ABAP add-ons. Further restrictions that concern the upgrade andmaintenance of your SAP system and that occur as a result of installing an add-on are described in release strategy note 1504243.
l Required releaseSAP NetWeaver 7.0 is required (optionally with Enhancement Package 1 or 2).
You require SAP ERP 6.0 or any further EHPIs.
l Import the latest SPAM/SAINT update.Ma e sure t at you ave nsta e t e atest SPAM SAINT up ate on your system. I a newer vers on s ava a e on SAP Serv ce Mar etp ace,import the new SPAM/SAINT update.
l Import the latest R3trans and tp.Ensure that you have imported the latest kernel version into your system. If a newer version is available on SAP Service Marketplace,import the most recent kernel.
l Obtain the following notes before you begin the installation:
l Prerequisites:
Check that your system meets the following prerequisites:
¡ Required Components and Support Packages
1500690 - GRCPIERP V1000_700 Inst/Delta Upg on SAP_BASIS 700
Version 5 Validity: 07.03.2013 - active Language English
Released On 08.03.2013 08:36:44
Release Status Released for Customer
Component GRC-SAC SAP GRC Access Control - Please use sub-components
BC-UPG-ADDON Upgrade Add-On Components (IS)Priority Recommendations / Additional Info
Category Installation information
Date Topic Short Description
<date><chapter> <specification>
Add-ons: Conditions: 70228
Release strategy Note: 1504243Problems with transaction SAINT: 822380
Component ReleaseSupportPackage
GRCPINW V1000_700 SAPK-103AGINGRCPINW
OR GRCPINW V1000_731
SAP_BASIS 700 SAPKB70013
Other Components
8/13/2019 0001500690
http://slidepdf.com/reader/full/0001500690 2/3
l If you install GRCPIERP together with GRCPINW V1000_731 you have to install at least GRCPIERP V1000_700 SP05.
l Additional Component Support Packages
The add-on GRCPIERP V1000_700 does not contain modifications. You can also perform the installation if you have already imported moreSupport Packages into your system than are specified in the section 'Required Components and Support Packages'.
l Additional information about the installation:
3. Release of GRCPIERP V1000_700 with Enhancement Packages
l For information about compatibility with Enhancement Packages, refer to release strategy note 1504243.
4. Preparing the GRCPIERP V1000_700 installation
l Making the Add-On GRCPIERP V1000_700 available
¡ The installation CD for GRCPIERP V1000_700 is not automatically sent to all customers. Request the CD with material number<51xxxxxx> from your local subsidiary or download the CD from SAP Service Marketplace.
¡ Log on as user:
¡ Switch to the <DIR_EPS_ROOT> directory of your SAP system (usually /usr/sap/trans/EPS). The <DIR_EPS_ROOT> directory is alsodisplayed under DIR_EPS_ROOT after you execute the RSPFPAR report.
¡ Go to the higher-level directory of <DIR_EPS_ROOT>.
¡ Unpack the SAR archive <SAR_Archive> on the CD with the following statement:
5. Executing the GRCPIERP V1000_700 installation
l User to be usedLog on to your SAP system in client 000 as a user with SAP_ALL authorization. Do NOT use the SAP* or DDIC users.
l Display the add-on installation package:Call transaction SAINT and choose 'Start' and 'Load'.After the list of uploaded packages is displayed, you can return to the initial screen of transaction SAINT by choosing F3 or 'Back'.
l Starting the installation
Call transaction SAINT and choose 'Start'. Select the Add-On GRCPIERP V1000_700 and choose "Continue". If all of the necessary conditionsfor importing the add-on have been fulfilled, the system will now display the relevant queue. The queue consists of the installationpackage, and it may also contain Support Packages and Add-On Support Packages.To start the installation process, choose 'Continue'. For more information, call transaction SAINT and choose 'Info' on the applicationtoolbar.The system prompts you to enter a password. This password is provided below.
6. After the installation of GRCPIERP V1000_700
l Generation errors
¡ There are no generation errors.
l Delivery CustomizingDelivery Customizing is imported into client 000 and may need to be copied to other clients. For more information, see Note 337623.
7. Language support
l In addition to German and English, the following languages are supported by GRCPINW V1000_700: Arabic, Czech, Danish, Spanish,Finnish,French, Hebrew, Croation, Hungarian, Italian, Japanese,Korean, Dutch, Norwegian, Polish, Portuguese, Russian, Slovak,Swedish, Turkish,Chinese trad., Chinese
l All the language-dependent parts of GRCPIERP are contained in the installation package of the add-on. If the relevant standard languageexists in the system when you import GRCPIERP, the language part of the add-on is automatically imported. You do not need to import alanguage transport separately.
l If you import a new standard language into your system after installing the GRCPIERP, you must manually ensure that the correspondinglanguage-dependent part of the add-on is imported. See Note 195442 for further information.
SAP_BW 700 SAPKW70013SAP_APPL 600 SAPKH60010
OR Any SAP_APPL EHPISAP_HR 600 SAPKE60003OR Any SAP_HR EHPI
If you have not yet installed these Component Support Package, youcan include them in the installation of GRCPIERP V1000_700. Formore information, see Note 83458.
CD material number add-on installation <51039481>
<sid>adm on UNIX
<SID>OFR on IBM i (previously i5/OS or OS/400)<SID>adm on Microsoft Windows
UNIX:
SAPCAR -xvf /GRCPIERP_V1000_700_INST/DATA/K-103AGINGRCPIERP.SAR
IBM i (previously i5/OS or OS/400):SAPCAR '-xvf /QOPT/<VOLID>/GRCPIERP_V1000_700_INST/DATA/K-103AGINGRCPIERP.SAR'Microsoft Windows:
SAPCAR -xvf <CD_DRIVE>:\GRCPIERP_V1000_700_INST\DATA\K-103AGINGRCPIERP.SAR
The CSR0120031469 0047283.PAT file should now be in the <DIR_EPS_ROOT>/in directory.
8/13/2019 0001500690
http://slidepdf.com/reader/full/0001500690 3/3
8. Passwor
l During the installation, the system prompts you to enter a password. This password is: 8A9F51531C
Validity
References
This document refers to:
SAP Notes
Software Component From Rel. To Rel. And Subsequent
GRCPIERP V1000_700 V1000_700
1510053 Install/Upgrade RTA for GRC Process Control 10.0
Recommended