View
79
Download
5
Category
Tags:
Preview:
DESCRIPTION
SAN
Citation preview
Name Issue Type Description
ADDB01, ADMOS01, ADOTC01,
ADREP01, ASEAW01, ASEAW02,
NETBW02B, NEWBW02B, NEWBW03,
PDDB01, PDMOS01, PDOTC01,
PDREP01, QDDB01, QDMOS01,
QDOTC01, QDREP01, RAPAW01A,
RAPBW01B, SDDB01, SDMOS01,
SDOTC01, SDREP01
Basic System
Information
Proliant BL480c (dual core processor) did not
match any E-Lab Navigator-identified Host
System.
ADDB01, ADMOS01, ADOTC01,
ADREP01, ASEAW01, BIEAW01,
DOMAW01, DOMAW02, EMBAW01A,
EMBBW01B, ITNAW01, ITNAW02,
ITNBW01, MDEPM01, MDEPM02,
NETBW02B, NEWBW02B, NEWBW03,
P01SEARCH01, P01WEBDB01,
P01WEBDB02, P02SEARCH01,
P02WEBDB01, PDDB01, PDMOS01,
PDOTC01, PDREP01, PSCAW01,
PSCBW01, PSCNW01, PSOAW01,
PSOBW01, PSONW01, QDDB01,
QDMOS01, QDOTC01, QDREP01,
PathManage
ment
Detected version PowerPath 5.3 SP1 (EOL)
is not recommended but is allowed.
ADDB01, ADMOS01, ADOTC01,
ADREP01, BIEAW01, ITNAW01,
MDEPM01, MDEPM02, NETBW02B,
NEWBW02B, NEWBW03, PSCNW01,
PSONW01, QDDB01, QDMOS01,
QDOTC01, QDREP01, RAPAW01A,
RAPBW01B, RDBNW01, REDAW01A,
TDEPM01, WSQASEARCH
PowerPathPowerpath device harddisk1 has policy:
BasicFailover
ADDB01, ADMOS01, ADOTC01,
ADREP01, BIEAW01, ITNAW01,
MDEPM01, MDEPM02, NETBW02B,
NEWBW02B, NEWBW03, PSCNW01,
PSONW01, QDDB01, QDMOS01,
QDOTC01, QDREP01, RAPAW01A,
RAPBW01B, RDBNW01, TDEPM01,
WSQASEARCH
PowerPathCould not find PowerPath capabilities
(license)
ADDB01, ADMOS01, ADOTC01,
ADREP01, ITNAW01, ITNAW02,
ITNBW01, MDEPM01, MDEPM02,
NETBW02B, NEWBW02B, NEWBW03,
P01SEARCH01, P02SEARCH01,
PDDB01, PDMOS01, PDOTC01,
PDREP01, QDDB01, QDMOS01,
QDOTC01, QDREP01, RAPAW01A,
RAPBW01B, SDDB01, SDMOS01,
SDOTC01, SDREP01, TDEPM01,
WSQASEARCH
HBAHBA is allowed but not listed in an EMC
recommended configuration.
ADDB01, ADMOS01, ADOTC01,
ADREP01, ITNAW01, ITNAW02,
ITNBW01, MDEPM01, MDEPM02,
NETBW02B, NEWBW02B, NEWBW03,
P01SEARCH01, P02SEARCH01,
PDDB01, PDMOS01, PDOTC01,
PDREP01, QDDB01, QDMOS01,
QDOTC01, QDREP01, RAPAW01A,
RAPBW01B, SDDB01, SDMOS01,
SDOTC01, SDREP01, TDEPM01,
WSQASEARCH
HBA
The EMC Qualified Host System information
required to validate the HBA bios for Emulex
LPe1105-HP 4Gb FC HBA for HP c-Class
Bladesystem (403621-B21) is absent, so no
recommendations can be made.
ADDB01, ADMOS01, ADOTC01,
ADREP01, ITNAW01, ITNAW02,
ITNBW01, MDEPM01, MDEPM02,
NETBW02B, NEWBW02B, NEWBW03,
P01SEARCH01, P02SEARCH01,
PDDB01, PDMOS01, PDOTC01,
PDREP01, QDDB01, QDMOS01,
QDOTC01, QDREP01, RAPAW01A,
RAPBW01B, SDDB01, SDMOS01,
SDOTC01, SDREP01, TDEPM01,
WSQASEARCH
HBA
The EMC Qualified Host System information
required to validate the HBA driver for
Emulex LPe1105-HP 4Gb FC HBA for HP c-
Class Bladesystem (403621-B21) is absent,
so no recommendations can be made.
ADDB01, ADMOS01, ADOTC01,
ADREP01, ITNAW01, ITNAW02,
ITNBW01, MDEPM01, MDEPM02,
NETBW02B, NEWBW02B, NEWBW03,
P01SEARCH01, P02SEARCH01,
PDDB01, PDMOS01, PDOTC01,
PDREP01, QDDB01, QDMOS01,
QDOTC01, QDREP01, RAPAW01A,
RAPBW01B, SDDB01, SDMOS01,
SDOTC01, SDREP01, TDEPM01,
WSQASEARCH
HBA
The EMC Qualified Host System information
required to validate the HBA firmware for
Emulex LPe1105-HP 4Gb FC HBA for HP c-
Class Bladesystem (403621-B21) is absent,
so no recommendations can be made.
ADDB01, ADMOS01, ADOTC01,
ADREP01, ITNAW01, MDEPM01,
MDEPM02, PSCNW01, QDDB01,
QDMOS01, QDOTC01, RAPAW01A,
RAPBW01B, TDEPM01, WSQASEARCH
PowerPathPowerpath device harddisk1 shows c1t0d0
with policy: unlic, status: alive, errors: 0
ADDB01, ADMOS01, ADOTC01,
ADREP01, ITNAW01, MDEPM01,
MDEPM02, PSCNW01, QDDB01,
QDMOS01, QDOTC01, RAPAW01A,
RAPBW01B, TDEPM01, WSQASEARCH
PowerPathPowerpath device harddisk1 shows c1t1d0
with policy: unlic, status: alive, errors: 0
ADDB01, ADMOS01, ADOTC01,
ADREP01, NETBW02B, NEWBW02B,
NEWBW03, PDDB01, PDMOS01,
PDOTC01, PDREP01, QDDB01,
QDMOS01, QDOTC01, QDREP01,
RAPAW01A, RAPBW01B, SDDB01,
SDMOS01, SDOTC01, SDREP01
HBAUnable to determine Host System(Proliant
BL480c (dual core processor)) information.
ADDB01, ADMOS01, ADOTC01,
ADREP01, PDDB01, PDMOS01,
PDOTC01, PDREP01, PSCAW01,
PSCBW01, QDDB01, QDMOS01,
QDOTC01, QDREP01, SDDB01,
SDMOS01, SDOTC01, SDREP01
SYMMETRIX
STORPort hotfix 957910 requires the SPC2
flag on Symmetrix FA ports to be Enabled.
Reference emc201305
ADDB01, ADMOS01, ADOTC01,
ADREP01, QDDB01, QDMOS01,
QDOTC01, QDREP01
SolutionsEna
bler
Unable to identify Solutions Enabler 7.1.2 as
EMC Qualified information.
ADDB01, ADOTC01, ADREP01,
DOMAW01, DRSANADM1, ITNAW01,
MDEPM02, NETBW02B, NEWBW02B,
NEWBW03, PDDB01, PDMOS01,
PDOTC01, PDREP01, PSCAW01,
PSCBW01, PSCNW01, PSOAW01,
PSOBW01, PSONW01, QDDB01,
QDREP01, RAPAW01A, RAPBW01B,
RDBNW01, SDDB01, SDMOS01,
TDEPM01
Disk Partition
PHYSICALDRIVE0 - Primary Partition 1 has
starting offset of 32. Best practice is to use a
multiple of 128 see emc56324 for further
details.
ADOTC01, DRSANADM1,
P01WEBDB01, P02WEBDB01,
PDREP01, QDREP01, SDREP01
Disk Partition
PHYSICALDRIVE3 - Primary Partition 1 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
ADOTC01, EMBAW01A, EMBBW01B,
NEWBW03, P01WEBDB01,
P01WEBDB02, P02WEBDB01, PDDB01,
PDMOS01, PDOTC01, PDREP01,
QDDB01, QDREP01, RAPAW01A,
RAPBW01B, SDMOS01, SDOTC01,
SDREP01
HBA NodeTimeOut, 0xa (Should be default)
ADOTC01, P01WEBDB01,
P01WEBDB02, P02WEBDB01, PDDB01,
PDMOS01, PDOTC01, PDREP01,
QDDB01, QDREP01, SDMOS01,
SDOTC01, SDREP01
HBA LinkTimeOut, 0x28 (Should be default)
ADOTC01, P01WEBDB01, QDREP01,
SDREP01Disk Partition
PHYSICALDRIVE2 - Primary Partition 1 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
ADOTC01, QDREP01 Disk Partition
PHYSICALDRIVE1 - PROXY-830 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
ADREP01 PowerPathPowerpath device harddisk2 shows c1t0d1
with policy: unlic, status: alive, errors: 0
ADREP01 PowerPathPowerpath device harddisk2 shows c1t1d1
with policy: unlic, status: alive, errors: 0
ADREP01, QDREP01 PowerPathPowerpath device harddisk3 shows c1t0d2
with policy: unlic, status: alive, errors: 0
ADREP01, QDREP01 PowerPathPowerpath device harddisk3 shows c1t1d2
with policy: unlic, status: alive, errors: 0
ADREP01, QDREP01, RDBNW01 PowerPathPowerpath device harddisk2 has policy:
BasicFailover
ADREP01, QDREP01, RDBNW01 PowerPathPowerpath device harddisk3 has policy:
BasicFailover
ASEAW01ClariionHostI
nteroperability
There is no Clariion array detected. Skipping
validation of Navisphere Host Agent 6.29
Software
ASEAW01ClariionHostI
nteroperability
There is no Clariion array detected. Skipping
validation of Navisphere Secure CLI 7.30
Software
ASEAW02 Config File20 - This is not equal to EMC recommended
setting of 60
ASEAW02, DRSANADM1 HBA
No STORPort hotfix found. For Windows
2003 running STORPort drivers, Microsoft
STORPort hotfix KB957910 is required by
EMC.
BIAAW01 HBA
EMC qualifies detected HBA model (Emulex
LPe1205-HP 8Gb FC HBA for HP c-Class
Bladesystem (456972-B21)) but detected
HBA Driver version (2.33.005) is not at
recommended level.
BIAAW01, BIEAW01 HBA
EMC qualifies detected HBA model (Emulex
LPe1205-HP 8Gb FC HBA for HP c-Class
Bladesystem (456972-B21)) but detected
HBA Firmware version (1.11A5) is not at
recommended level.
BIEAW01 HBA
EMC qualifies detected HBA model (Emulex
LPe1205-HP 8Gb FC HBA for HP c-Class
Bladesystem (456972-B21)) but detected
HBA Driver version (2.32.002) is not at
recommended level.
BIEAW01, PSONW01 PowerPathPowerpath device harddisk1 shows c2t0d0
with policy: unlic, status: alive, errors: 0
BIEAW01, PSONW01 PowerPathPowerpath device harddisk1 shows c2t1d0
with policy: unlic, status: alive, errors: 0
DOMAW01, DRSANADM1, REDAW01A,
REDBW01BHBA
EMC qualifies detected HBA model (A8002A-
B/FC2142SR (LPe1150)) but detected HBA
Driver version (2.20.006) is not at
recommended level.
DOMAW01, MDEPM01, MDEPM02,
P01SEARCH01, P01WEBDB01,
P02SEARCH01, PDDB01, PDREP01,
PSCAW01, PSCNW01, QDMOS01,
TDEPM01, WSQADB1, WSQADB2,
WSQASEARCH
Disk Partition
PHYSICALDRIVE1 - Primary Partition 1 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
DOMAW01, REDAW01A, REDBW01B HBA
EMC qualifies detected HBA model (A8002A-
B/FC2142SR (LPe1150)) but detected HBA
BIOS version (2.11a0) is not at
recommended level.
DOMAW02 Disk Partition
PHYSICALDRIVE0 - Primary Partition 1 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
DOMAW02 HBA
EMC qualifies detected HBA model (A8002A-
B/FC2142SR (LPe1150)) but detected HBA
BIOS version (2.12a6) is not at
recommended level.
DOMAW02 HBA
EMC qualifies detected HBA model (A8002A-
B/FC2142SR (LPe1150)) but detected HBA
Driver version (2.32.002) is not at
recommended level.
DOMAW02 HBA
EMC qualifies detected HBA model (A8003A-
B/FC2242SR (LPe11002)) but detected HBA
BIOS version (2.12a6) is not at
recommended level.
DOMAW02 HBA
EMC qualifies detected HBA model (A8003A-
B/FC2242SR (LPe11002)) but detected HBA
Driver version (2.32.002) is not at
recommended level.
DOMAW02, SDREP01 Disk Partition
PHYSICALDRIVE1 - Primary Partition 1 has
starting offset of 32. Best practice is to use a
multiple of 128 see emc56324 for further
details.
DRSANADM1 Disk Partition
PHYSICALDRIVE8 - Primary Partition 1 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
DRSANADM1 HBA
EMC qualifies detected HBA model (A8002A-
B/FC2142SR (LPe1150)) but detected HBA
BIOS version (2.02a1) is not at
recommended level.
DRSANADM1 HBA
EMC qualifies detected HBA model (A8002A-
B/FC2142SR (LPe1150)) but detected HBA
Firmware version (2.50A6) is not at
recommended level.
DRSANADM1PathManage
ment
Detected version PowerPath 5.3 (EOL) is not
recommended but is allowed.
DRSANADM1, P01WEBDB01,
P02WEBDB01, PDDB01, SDREP01,
WSQADB1
Disk Partition
PHYSICALDRIVE4 - Primary Partition 1 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
DRSANADM1, P01WEBDB01,
P02WEBDB01, SDREP01Disk Partition
PHYSICALDRIVE7 - Primary Partition 1 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
EMBAW01A OS UpdateSymmetrix Microcode Patch Level 5773.184
is not at the latest Patch Level 5773.176
EMBAW01A, EMBBW01B HBA
EMC qualifies detected HBA model (AJ763A-
B (LPe12002)) but detected HBA BIOS
version (2.02a2) is not at recommended
level.
EMBAW01A, EMBBW01B HBA
EMC qualifies detected HBA model (AJ763A-
B (LPe12002)) but detected HBA Driver
version (2.20.006) is not at recommended
level.
EMBAW01A, EMBBW01B HBA
EMC qualifies detected HBA model (AJ763A-
B (LPe12002)) but detected HBA Firmware
version (2.00A3) is not at recommended
level.
EMBAW01A, EMBBW01B, PDDB01,
PDMOS01, PDOTC01, PDREP01,
SDDB01, SDMOS01, SDOTC01,
SDREP01
SolutionsEna
bler
Unable to identify Solutions Enabler 7.1.1 as
EMC Qualified information.
ITNAW01, ITNAW02, ITNBW01,
MDEPM01, MDEPM02, P01SEARCH01,
P02SEARCH01, TDEPM01,
WSQASEARCH
Basic System
Information
Proliant BL460c (dual core processor) did not
match any E-Lab Navigator-identified Host
System.
ITNAW01, ITNAW02, ITNBW01,
MDEPM01, MDEPM02, P01SEARCH01,
P02SEARCH01, TDEPM01,
WSQASEARCH
HBAUnable to determine Host System(Proliant
BL460c (dual core processor)) information.
MDEPM01 Disk Partition
PHYSICALDRIVE0 - PROXY-423 has
starting offset of 32. Best practice is to use a
multiple of 128 see emc56324 for further
details.
NETBW02B, NEWBW02B, NEWBW03 PowerPathPowerpath device harddisk0 has policy:
BasicFailover
NETBW02B, NEWBW02B, NEWBW03 PowerPathPowerpath device harddisk0 shows c1t0d0
with policy: unlic, status: alive, errors: 0
NETBW02B, NEWBW02B, NEWBW03 PowerPathPowerpath device harddisk0 shows c1t1d0
with policy: unlic, status: alive, errors: 0
NETBW02B, NEWBW02B, NEWBW03,
QDREP01PowerPath
Powerpath device harddisk1 shows c1t0d1
with policy: unlic, status: alive, errors: 0
NETBW02B, NEWBW02B, NEWBW03,
QDREP01PowerPath
Powerpath device harddisk1 shows c1t1d1
with policy: unlic, status: alive, errors: 0
P01WEBDB01, P01WEBDB02,
P02WEBDB01, PSCAW01, PSCBW01,
PSOAW01, PSOBW01, RCLAW01A,
RCLBW01B, RDBNW01, SDBAW01A,
SDBBW01B
HBA
EMC qualifies detected HBA model (Emulex
LPe1105-HP 4Gb FC HBA for HP c-Class
Bladesystem (403621-B21)) but detected
HBA BIOS version (3.00a4) is not at
recommended level.
P01WEBDB01, P01WEBDB02,
P02WEBDB01, PSOAW01, PSOBW01,
RCLAW01A, RCLBW01B, SDBAW01A,
SDBBW01B
HBA
EMC qualifies detected HBA model (Emulex
LPe1105-HP 4Gb FC HBA for HP c-Class
Bladesystem (403621-B21)) but detected
HBA Driver version (2.20.006) is not at
recommended level.
P01WEBDB02, PDDB01, QDDB01,
WSQADB1Disk Partition
PHYSICALDRIVE6 - Primary Partition 1 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
P01WEBDB02, QDDB01 Disk Partition
PHYSICALDRIVE5 - Primary Partition 1 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
P02SEARCH01 HBA LinkTimeOut, 0x1c (Should be default)
P02WEBDB01, SDREP01 Disk Partition
PHYSICALDRIVE1 - PROXY-1041 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
P02WEBDB01, SDREP01 Disk Partition
PHYSICALDRIVE2 - PROXY-1042 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
PDDB01 Disk Partition
PHYSICALDRIVE3 - PROXY-668 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
PDDB01, WSQADB1 Disk Partition
PHYSICALDRIVE5 - PROXY-691 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
PDDB01, WSQADB1 Disk Partition
PHYSICALDRIVE7 - PROXY-692 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
PDOTC01 Disk Partition
PHYSICALDRIVE3 - PROXY-917 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
PDREP01 Disk Partition
PHYSICALDRIVE4 - PROXY-875 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
PSCAW01, PSCBW01SolutionsEna
bler
Unable to find any EMC supported versions
for Solutions Enabler 7.1
PSCAW01, PSCBW01SolutionsEna
bler
Unable to identify Solutions Enabler 7.1 as
EMC Qualified information.
PSCAW01, PSCBW01, PSCNW01,
PSONW01, RDBNW01, WSQADB1,
WSQADB2
HBA
EMC qualifies detected HBA model (Emulex
LPe1105-HP 4Gb FC HBA for HP c-Class
Bladesystem (403621-B21)) but detected
HBA Driver version (2.32.002) is not at
recommended level.
PSOAW01 PowerPathPowerpath device harddisk?? shows c1t0d3
with policy: active, status: dead, errors: 1
PSOAW01 PowerPathPowerpath device harddisk?? shows c1t1d3
with policy: active, status: dead, errors: 1
PSOAW01 PowerPathPowerpath device harddisk?? shows c2t0d3
with policy: active, status: dead, errors: 1
PSOAW01 PowerPathPowerpath device harddisk?? shows c2t1d3
with policy: active, status: dead, errors: 1
PSONW01, RAPAW01A, RAPBW01B,
RDBNW01HBA
No STORPort hotfix found. For Windows
2008 running STORPort drivers, Microsoft
STORPort hotfix KB968675 is required by
EMC.
QDREP01 PowerPathPowerpath device harddisk2 shows c1t0d0
with policy: unlic, status: alive, errors: 0
QDREP01 PowerPathPowerpath device harddisk2 shows c1t1d0
with policy: unlic, status: alive, errors: 0
RCLAW01A IO Timeout error
RDBNW01 PowerPathPowerpath device harddisk1 shows c3t0d0
with policy: unlic, status: alive, errors: 0
RDBNW01 PowerPathPowerpath device harddisk1 shows c3t1d0
with policy: unlic, status: alive, errors: 0
RDBNW01 PowerPathPowerpath device harddisk2 shows c3t0d1
with policy: unlic, status: alive, errors: 0
RDBNW01 PowerPathPowerpath device harddisk2 shows c3t1d1
with policy: unlic, status: alive, errors: 0
RDBNW01 PowerPathPowerpath device harddisk3 shows c3t0d2
with policy: unlic, status: alive, errors: 0
RDBNW01 PowerPathPowerpath device harddisk3 shows c3t1d2
with policy: unlic, status: alive, errors: 0
RDBNW01 PowerPathPowerpath device harddisk4 has policy:
BasicFailover
RDBNW01 PowerPathPowerpath device harddisk4 shows c3t0d3
with policy: unlic, status: alive, errors: 0
RDBNW01 PowerPathPowerpath device harddisk4 shows c3t1d3
with policy: unlic, status: alive, errors: 0
REDAW01A PowerPathPowerpath device harddisk1 shows c3t0d1
with policy: unlic, status: alive, errors: 0
REDAW01A PowerPathPowerpath device harddisk1 shows c3t1d1
with policy: unlic, status: alive, errors: 0
ITNBW01, MDEPM01, MDEPM02,
NETBW02B, NEWBW02B, NEWBW03,
P01SEARCH01, P01WEBDB01,
P01WEBDB02, P02SEARCH01,
P02WEBDB01, PDDB01, PDMOS01,
PDOTC01, PDREP01, PSCAW01,
PSCBW01, PSCNW01, PSOAW01,
PSOBW01
PathManage
ment
Detected version PowerPath 5.3 SP1 (EOL)
is not recommended but is allowed.
ITNBW01, MDEPM01, MDEPM02,
NETBW02B, NEWBW02B, NEWBW03,
P01SEARCH01, P02SEARCH01,
PDDB01, PDMOS01, PDOTC01,
PDREP01
HBAHBA is allowed but not listed in an EMC
recommended configuration.
ITNBW01, MDEPM01, MDEPM02,
NETBW02B, NEWBW02B, NEWBW03,
P01SEARCH01, P02SEARCH01,
PDDB01, PDMOS01, PDOTC01,
PDREP01
HBA
The EMC Qualified Host System information
required to validate the HBA bios for Emulex
LPe1105-HP 4Gb FC HBA for HP c-Class
Bladesystem (403621-B21) is absent, so no
recommendations can be made.
ITNBW01, MDEPM01, MDEPM02,
NETBW02B, NEWBW02B, NEWBW03,
P01SEARCH01, P02SEARCH01,
PDDB01, PDMOS01, PDOTC01,
PDREP01
HBA
The EMC Qualified Host System information
required to validate the HBA driver for
Emulex LPe1105-HP 4Gb FC HBA for HP c-
Class Bladesystem (403621-B21) is absent,
so no recommendations can be made.
ITNBW01, MDEPM01, MDEPM02,
NETBW02B, NEWBW02B, NEWBW03,
P01SEARCH01, P02SEARCH01,
PDDB01, PDMOS01, PDOTC01,
PDREP01
HBA
The EMC Qualified Host System information
required to validate the HBA firmware for
Emulex LPe1105-HP 4Gb FC HBA for HP c-
Class Bladesystem (403621-B21) is absent,
so no recommendations can be made.
ITNBW01, MDEPM01, MDEPM02,
P01SEARCH01, P02SEARCH01
Basic System
Information
Proliant BL460c (dual core processor) did not
match any E-Lab Navigator-identified Host
System.
ITNBW01, MDEPM01, MDEPM02,
P01SEARCH01, P02SEARCH01HBA
Unable to determine Host System(Proliant
BL460c (dual core processor)) information.
MDEPM01 Disk Partition
PHYSICALDRIVE0 - PROXY-423 has
starting offset of 32. Best practice is to use a
multiple of 128 see emc56324 for further
details.
MDEPM01, MDEPM02, NETBW02B,
NEWBW02B, NEWBW03, PSCNW01PowerPath
Could not find PowerPath capabilities
(license)
MDEPM01, MDEPM02, NETBW02B,
NEWBW02B, NEWBW03, PSCNW01PowerPath
Powerpath device harddisk1 has policy:
BasicFailover
MDEPM01, MDEPM02, P01SEARCH01,
P01WEBDB01, P02SEARCH01,
PDDB01, PDREP01, PSCAW01,
PSCNW01
Disk Partition
PHYSICALDRIVE1 - Primary Partition 1 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
MDEPM01, MDEPM02, PSCNW01 PowerPathPowerpath device harddisk1 shows c1t0d0
with policy: unlic, status: alive, errors: 0
MDEPM01, MDEPM02, PSCNW01 PowerPathPowerpath device harddisk1 shows c1t1d0
with policy: unlic, status: alive, errors: 0
MDEPM02, NETBW02B, NEWBW02B,
NEWBW03, PDDB01, PDMOS01,
PDOTC01, PDREP01, PSCAW01,
PSCBW01, PSCNW01, PSOAW01,
PSOBW01
Disk Partition
PHYSICALDRIVE0 - Primary Partition 1 has
starting offset of 32. Best practice is to use a
multiple of 128 see emc56324 for further
details.
NETBW02B, NEWBW02B, NEWBW03 PowerPathPowerpath device harddisk0 has policy:
BasicFailover
NETBW02B, NEWBW02B, NEWBW03 PowerPathPowerpath device harddisk0 shows c1t0d0
with policy: unlic, status: alive, errors: 0
NETBW02B, NEWBW02B, NEWBW03 PowerPathPowerpath device harddisk0 shows c1t1d0
with policy: unlic, status: alive, errors: 0
NETBW02B, NEWBW02B, NEWBW03 PowerPathPowerpath device harddisk1 shows c1t0d1
with policy: unlic, status: alive, errors: 0
NETBW02B, NEWBW02B, NEWBW03 PowerPathPowerpath device harddisk1 shows c1t1d1
with policy: unlic, status: alive, errors: 0
NETBW02B, NEWBW02B, NEWBW03,
PDDB01, PDMOS01, PDOTC01,
PDREP01
Basic System
Information
Proliant BL480c (dual core processor) did not
match any E-Lab Navigator-identified Host
System.
NETBW02B, NEWBW02B, NEWBW03,
PDDB01, PDMOS01, PDOTC01,
PDREP01
HBAUnable to determine Host System(Proliant
BL480c (dual core processor)) information.
NEWBW03, P01WEBDB01,
P01WEBDB02, P02WEBDB01, PDDB01,
PDMOS01, PDOTC01, PDREP01
HBA NodeTimeOut, 0xa (Should be default)
P01WEBDB01 Disk Partition
PHYSICALDRIVE2 - Primary Partition 1 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
P01WEBDB01, P01WEBDB02,
P02WEBDB01, PDDB01, PDMOS01,
PDOTC01, PDREP01
HBA LinkTimeOut, 0x28 (Should be default)
P01WEBDB01, P01WEBDB02,
P02WEBDB01, PSCAW01, PSCBW01,
PSOAW01, PSOBW01
HBA
EMC qualifies detected HBA model (Emulex
LPe1105-HP 4Gb FC HBA for HP c-Class
Bladesystem (403621-B21)) but detected
HBA BIOS version (3.00a4) is not at
recommended level.
P01WEBDB01, P01WEBDB02,
P02WEBDB01, PSOAW01, PSOBW01HBA
EMC qualifies detected HBA model (Emulex
LPe1105-HP 4Gb FC HBA for HP c-Class
Bladesystem (403621-B21)) but detected
HBA Driver version (2.20.006) is not at
recommended level.
P01WEBDB01, P02WEBDB01 Disk Partition
PHYSICALDRIVE7 - Primary Partition 1 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
P01WEBDB01, P02WEBDB01, PDDB01 Disk Partition
PHYSICALDRIVE4 - Primary Partition 1 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
P01WEBDB01, P02WEBDB01,
PDREP01Disk Partition
PHYSICALDRIVE3 - Primary Partition 1 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
P01WEBDB02 Disk Partition
PHYSICALDRIVE5 - Primary Partition 1 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
P01WEBDB02, PDDB01 Disk Partition
PHYSICALDRIVE6 - Primary Partition 1 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
P02SEARCH01 HBA LinkTimeOut, 0x1c (Should be default)
P02WEBDB01 Disk Partition
PHYSICALDRIVE1 - PROXY-1041 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
P02WEBDB01 Disk Partition
PHYSICALDRIVE2 - PROXY-1042 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
PDDB01 Disk Partition
PHYSICALDRIVE3 - PROXY-668 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
PDDB01 Disk Partition
PHYSICALDRIVE5 - PROXY-691 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
PDDB01 Disk Partition
PHYSICALDRIVE7 - PROXY-692 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
PDDB01, PDMOS01, PDOTC01,
PDREP01
SolutionsEna
bler
Unable to identify Solutions Enabler 7.1.1 as
EMC Qualified information.
PDDB01, PDMOS01, PDOTC01,
PDREP01, PSCAW01, PSCBW01SYMMETRIX
STORPort hotfix 957910 requires the SPC2
flag on Symmetrix FA ports to be Enabled.
Reference emc201305
PDOTC01 Disk Partition
PHYSICALDRIVE3 - PROXY-917 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
PDREP01 Disk Partition
PHYSICALDRIVE4 - PROXY-875 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
PSCAW01, PSCBW01SolutionsEna
bler
Unable to find any EMC supported versions
for Solutions Enabler 7.1
PSCAW01, PSCBW01SolutionsEna
bler
Unable to identify Solutions Enabler 7.1 as
EMC Qualified information.
PSCAW01, PSCBW01, PSCNW01 HBA
EMC qualifies detected HBA model (Emulex
LPe1105-HP 4Gb FC HBA for HP c-Class
Bladesystem (403621-B21)) but detected
HBA Driver version (2.32.002) is not at
recommended level.
PSOAW01 PowerPathPowerpath device harddisk?? shows c1t0d3
with policy: active, status: dead, errors: 1
PSOAW01 PowerPathPowerpath device harddisk?? shows c1t1d3
with policy: active, status: dead, errors: 1
PSOAW01 PowerPathPowerpath device harddisk?? shows c2t0d3
with policy: active, status: dead, errors: 1
PSOAW01 PowerPathPowerpath device harddisk?? shows c2t1d3
with policy: active, status: dead, errors: 1
PSONW01 PowerPathPowerpath device harddisk1 shows c2t0d0
with policy: unlic, status: alive, errors: 0
PSONW01 PowerPathPowerpath device harddisk1 shows c2t1d0
with policy: unlic, status: alive, errors: 0
PSONW01, QDDB01, QDMOS01,
QDOTC01, QDREP01, RAPAW01A,
RAPBW01B, RCLAW01A, RCLBW01B,
RDBNW01, REDAW01A, REDBW01B,
SDBAW01A, SDBBW01B, SDDB01,
SDMOS01, SDOTC01, SDREP01,
TDEPM01, WSQADB1, WSQADB2,
WSQASEARCH
PathManage
ment
Detected version PowerPath 5.3 SP1 (EOL)
is not recommended but is allowed.
PSONW01, QDDB01, QDMOS01,
QDOTC01, QDREP01, RAPAW01A,
RAPBW01B, RDBNW01, REDAW01A,
TDEPM01, WSQASEARCH
PowerPathPowerpath device harddisk1 has policy:
BasicFailover
PSONW01, QDDB01, QDMOS01,
QDOTC01, QDREP01, RAPAW01A,
RAPBW01B, RDBNW01, TDEPM01,
WSQASEARCH
PowerPathCould not find PowerPath capabilities
(license)
PSONW01, QDDB01, QDREP01,
RAPAW01A, RAPBW01B, RDBNW01,
SDDB01, SDMOS01, TDEPM01
Disk Partition
PHYSICALDRIVE0 - Primary Partition 1 has
starting offset of 32. Best practice is to use a
multiple of 128 see emc56324 for further
details.
PSONW01, RAPAW01A, RAPBW01B,
RDBNW01HBA
No STORPort hotfix found. For Windows
2008 running STORPort drivers, Microsoft
STORPort hotfix KB968675 is required by
EMC.
PSONW01, RDBNW01, WSQADB1,
WSQADB2HBA
EMC qualifies detected HBA model (Emulex
LPe1105-HP 4Gb FC HBA for HP c-Class
Bladesystem (403621-B21)) but detected
HBA Driver version (2.32.002) is not at
recommended level.
QDDB01 Disk Partition
PHYSICALDRIVE5 - Primary Partition 1 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
QDDB01, QDMOS01, QDOTC01,
QDREP01
SolutionsEna
bler
Unable to identify Solutions Enabler 7.1.2 as
EMC Qualified information.
QDDB01, QDMOS01, QDOTC01,
QDREP01, RAPAW01A, RAPBW01B,
SDDB01, SDMOS01, SDOTC01,
SDREP01
Basic System
Information
Proliant BL480c (dual core processor) did not
match any E-Lab Navigator-identified Host
System.
QDDB01, QDMOS01, QDOTC01,
QDREP01, RAPAW01A, RAPBW01B,
SDDB01, SDMOS01, SDOTC01,
SDREP01
HBAUnable to determine Host System(Proliant
BL480c (dual core processor)) information.
QDDB01, QDMOS01, QDOTC01,
QDREP01, RAPAW01A, RAPBW01B,
SDDB01, SDMOS01, SDOTC01,
SDREP01, TDEPM01, WSQASEARCH
HBAHBA is allowed but not listed in an EMC
recommended configuration.
QDDB01, QDMOS01, QDOTC01,
QDREP01, RAPAW01A, RAPBW01B,
SDDB01, SDMOS01, SDOTC01,
SDREP01, TDEPM01, WSQASEARCH
HBA
The EMC Qualified Host System information
required to validate the HBA bios for Emulex
LPe1105-HP 4Gb FC HBA for HP c-Class
Bladesystem (403621-B21) is absent, so no
recommendations can be made.
QDDB01, QDMOS01, QDOTC01,
QDREP01, RAPAW01A, RAPBW01B,
SDDB01, SDMOS01, SDOTC01,
SDREP01, TDEPM01, WSQASEARCH
HBA
The EMC Qualified Host System information
required to validate the HBA driver for
Emulex LPe1105-HP 4Gb FC HBA for HP c-
Class Bladesystem (403621-B21) is absent,
so no recommendations can be made.
QDDB01, QDMOS01, QDOTC01,
QDREP01, RAPAW01A, RAPBW01B,
SDDB01, SDMOS01, SDOTC01,
SDREP01, TDEPM01, WSQASEARCH
HBA
The EMC Qualified Host System information
required to validate the HBA firmware for
Emulex LPe1105-HP 4Gb FC HBA for HP c-
Class Bladesystem (403621-B21) is absent,
so no recommendations can be made.
QDDB01, QDMOS01, QDOTC01,
QDREP01, SDDB01, SDMOS01,
SDOTC01, SDREP01
SYMMETRIX
STORPort hotfix 957910 requires the SPC2
flag on Symmetrix FA ports to be Enabled.
Reference emc201305
QDDB01, QDMOS01, QDOTC01,
RAPAW01A, RAPBW01B, TDEPM01,
WSQASEARCH
PowerPathPowerpath device harddisk1 shows c1t0d0
with policy: unlic, status: alive, errors: 0
QDDB01, QDMOS01, QDOTC01,
RAPAW01A, RAPBW01B, TDEPM01,
WSQASEARCH
PowerPathPowerpath device harddisk1 shows c1t1d0
with policy: unlic, status: alive, errors: 0
QDDB01, QDREP01, RAPAW01A,
RAPBW01B, SDMOS01, SDOTC01,
SDREP01
HBA NodeTimeOut, 0xa (Should be default)
QDDB01, QDREP01, SDMOS01,
SDOTC01, SDREP01HBA LinkTimeOut, 0x28 (Should be default)
QDDB01, WSQADB1 Disk Partition
PHYSICALDRIVE6 - Primary Partition 1 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
QDMOS01, TDEPM01, WSQADB1,
WSQADB2, WSQASEARCHDisk Partition
PHYSICALDRIVE1 - Primary Partition 1 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
QDREP01 Disk Partition
PHYSICALDRIVE1 - PROXY-830 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
QDREP01 PowerPathPowerpath device harddisk1 shows c1t0d1
with policy: unlic, status: alive, errors: 0
QDREP01 PowerPathPowerpath device harddisk1 shows c1t1d1
with policy: unlic, status: alive, errors: 0
QDREP01 PowerPathPowerpath device harddisk2 shows c1t0d0
with policy: unlic, status: alive, errors: 0
QDREP01 PowerPathPowerpath device harddisk2 shows c1t1d0
with policy: unlic, status: alive, errors: 0
QDREP01 PowerPathPowerpath device harddisk3 shows c1t0d2
with policy: unlic, status: alive, errors: 0
QDREP01 PowerPathPowerpath device harddisk3 shows c1t1d2
with policy: unlic, status: alive, errors: 0
QDREP01, RDBNW01 PowerPathPowerpath device harddisk2 has policy:
BasicFailover
QDREP01, RDBNW01 PowerPathPowerpath device harddisk3 has policy:
BasicFailover
QDREP01, SDREP01 Disk Partition
PHYSICALDRIVE2 - Primary Partition 1 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
QDREP01, SDREP01 Disk Partition
PHYSICALDRIVE3 - Primary Partition 1 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
RCLAW01A IO Timeout error
RCLAW01A, RCLBW01B, RDBNW01,
SDBAW01A, SDBBW01BHBA
EMC qualifies detected HBA model (Emulex
LPe1105-HP 4Gb FC HBA for HP c-Class
Bladesystem (403621-B21)) but detected
HBA BIOS version (3.00a4) is not at
recommended level.
RCLAW01A, RCLBW01B, SDBAW01A,
SDBBW01BHBA
EMC qualifies detected HBA model (Emulex
LPe1105-HP 4Gb FC HBA for HP c-Class
Bladesystem (403621-B21)) but detected
HBA Driver version (2.20.006) is not at
recommended level.
RDBNW01 PowerPathPowerpath device harddisk1 shows c3t0d0
with policy: unlic, status: alive, errors: 0
RDBNW01 PowerPathPowerpath device harddisk1 shows c3t1d0
with policy: unlic, status: alive, errors: 0
RDBNW01 PowerPathPowerpath device harddisk2 shows c3t0d1
with policy: unlic, status: alive, errors: 0
RDBNW01 PowerPathPowerpath device harddisk2 shows c3t1d1
with policy: unlic, status: alive, errors: 0
RDBNW01 PowerPathPowerpath device harddisk3 shows c3t0d2
with policy: unlic, status: alive, errors: 0
RDBNW01 PowerPathPowerpath device harddisk3 shows c3t1d2
with policy: unlic, status: alive, errors: 0
RDBNW01 PowerPathPowerpath device harddisk4 has policy:
BasicFailover
RDBNW01 PowerPathPowerpath device harddisk4 shows c3t0d3
with policy: unlic, status: alive, errors: 0
RDBNW01 PowerPathPowerpath device harddisk4 shows c3t1d3
with policy: unlic, status: alive, errors: 0
REDAW01A PowerPathPowerpath device harddisk1 shows c3t0d1
with policy: unlic, status: alive, errors: 0
REDAW01A PowerPathPowerpath device harddisk1 shows c3t1d1
with policy: unlic, status: alive, errors: 0
REDAW01A, REDBW01B HBA
EMC qualifies detected HBA model (A8002A-
B/FC2142SR (LPe1150)) but detected HBA
BIOS version (2.11a0) is not at
recommended level.
REDAW01A, REDBW01B HBA
EMC qualifies detected HBA model (A8002A-
B/FC2142SR (LPe1150)) but detected HBA
Driver version (2.20.006) is not at
recommended level.
SDDB01, SDMOS01, SDOTC01,
SDREP01
SolutionsEna
bler
Unable to identify Solutions Enabler 7.1.1 as
EMC Qualified information.
SDREP01 Disk Partition
PHYSICALDRIVE1 - Primary Partition 1 has
starting offset of 32. Best practice is to use a
multiple of 128 see emc56324 for further
details.
SDREP01 Disk Partition
PHYSICALDRIVE1 - PROXY-1041 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
SDREP01 Disk Partition
PHYSICALDRIVE2 - PROXY-1042 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
SDREP01 Disk Partition
PHYSICALDRIVE7 - Primary Partition 1 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
SDREP01, WSQADB1 Disk Partition
PHYSICALDRIVE4 - Primary Partition 1 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
TDEPM01, WSQASEARCHBasic System
Information
Proliant BL460c (dual core processor) did not
match any E-Lab Navigator-identified Host
System.
TDEPM01, WSQASEARCH HBAUnable to determine Host System(Proliant
BL460c (dual core processor)) information.
WSQADB1 Disk Partition
PHYSICALDRIVE5 - PROXY-691 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
WSQADB1 Disk Partition
PHYSICALDRIVE7 - PROXY-692 has
starting offset of 63. Best practice is to use a
multiple of 128 see emc56324 for further
details.
HCL Remark
The Base system is not under EMC support
matrix
Not an issue is considering firmware upgrade
Infrastructure Software EMC PowerPath 5.5 --
Requires mandatory patch 5.5 P01 if using
PowerPath Encryption with RSA or PowerPath
Migration Enabler features. || For encryption
support please refer to the PowerPath and
PowerPath/VE Family for Windows Release
Notes. || Support of VSS Provider requires
minimum EMC Solutions Enabler 7.0.0.0
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
Have to rely on Host side recommendation
recommended bios version 3.11a5, driver
2.50.007, 2.70.018 and firmware level 2.82a4
recommended bios version 3.11a5, driver
2.50.007, 2.70.018 and firmware level 2.82a4
recommended bios version 3.11a5, driver
2.50.007, 2.70.018 and firmware level 2.82a4
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
Have to rely on Host side recommendation
SPC2 Flag need to be configured on the FA
port this host are masked to
Install any of the version which is
recommended bt EMC EMC Solutions
Enabler 7.2, EMC Solutions Enabler 7.2.1,
EMC Solutions Enabler 7.3, EMC Solutions
Enabler 7.3.1, EMC Solutions Enabler 7.3.2,
EMC Solutions Enabler 7.4, EMC Solutions
Enabler 7.5, EMC Solutions Enabler 7.5.1,
EMC Solutions Enabler 7.6
No remark
No remark
Please set the HBA Node time out to 0xa
Please set the HBA link time out to 0x28
No remark
No remark
No remark
No remark
No remark
No remark
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
not required
not required
Set the time "TimeOutValue =60, in
HKEY_LOCAL_MACHINE\System\CurrentCo
ntrolSet\Services\Disk
recomendaded to install "Microsoft STORPort
hotfix KB957910"
Hba driver recommended 2.70.018, 2.72.012
recommended Firmware 2.00a4
Recommended Driver 2.70.018, 2.72.012
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
recommended Driver 2.70.018
No remark
recommended bios 2.12a9
No remark
recommended bios 2.12a9
Recommended 2.70.018
Recommended bios 2.12a9
Recommended driver 2.70.018
No remark
No remark
Recommended 2.12a9
Recommended 2.82a4
EMC PowerPath 5.5, EMC PowerPath 5.5
SP1, EMC PowerPath 5.7
No remark
No remark
No issue with switch upgrade
Recommended bios2.12a9
Recommended driver2.72.012
Recommended firmware 2.00a4
Install any of the version which is
recommended bt EMC EMC Solutions
Enabler 7.2, EMC Solutions Enabler 7.2.1,
EMC Solutions Enabler 7.3, EMC Solutions
Enabler 7.3.1, EMC Solutions Enabler 7.3.2,
EMC Solutions Enabler 7.4, EMC Solutions
Enabler 7.5, EMC Solutions Enabler 7.5.1,
EMC Solutions Enabler 7.6
Have to rely on Host side recommendation
Have to rely on Host side recommendation
No remark
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
Recommended bios 3.11a5
Recommended driver 2.50.007, 2.70.018
No remark
No remark
0x1c
No remark
No remark
No remark
No remark
No remark
No remark
No remark
Install any of the version which is
recommended bt EMC EMC Solutions
Enabler 7.2, EMC Solutions Enabler 7.2.1,
EMC Solutions Enabler 7.3, EMC Solutions
Enabler 7.3.1, EMC Solutions Enabler 7.3.2,
EMC Solutions Enabler 7.4, EMC Solutions
Enabler 7.5, EMC Solutions Enabler 7.5.1,
EMC Solutions Enabler 7.6
Install any of the version which is
recommended bt EMC EMC Solutions
Enabler 7.2, EMC Solutions Enabler 7.2.1,
EMC Solutions Enabler 7.3, EMC Solutions
Enabler 7.3.1, EMC Solutions Enabler 7.3.2,
EMC Solutions Enabler 7.4, EMC Solutions
Enabler 7.5, EMC Solutions Enabler 7.5.1,
EMC Solutions Enabler 7.6
recommended driver 2.50.007, 2.70.018
Verify the device if not in use, remove from
the system to avoid error
Verify the device if not in use, remove from
the system to avoid error
Verify the device if not in use, remove from
the system to avoid error
Verify the device if not in use, remove from
the system to avoid error
recommended to install Microsoft STORPort
hotfix KB968675
Verify the device if not in use, remove from
the system to avoid error
Verify the device if not in use, remove from
the system to avoid error
No Ttime out error
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
EMC PowerPath 5.5, EMC PowerPath 5.5
SP1, EMC PowerPath 5.7
The HBA installaed on the system is
LPe1105-HP (Emulex LPe1105-HP 4Gb FC
HBA for HP c-Class Bladesystem (403621-
B21)) recommended bios version 3.11a5,
driver 2.50.007, 2.70.018 and firmware level
2.82a4
recommended bios version 3.11a5, driver
2.50.007, 2.70.018 and firmware level 2.82a4
recommended bios version 3.11a5, driver
2.50.007, 2.70.018 and firmware level 2.82a4
recommended bios version 3.11a5, driver
2.50.007, 2.70.018 and firmware level 2.82a4
No in EMC data base
recommended bios version 3.11a5, driver
2.50.007, 2.70.018 and firmware level 2.82a4
No remark
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
No remark
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
No remark
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
No issue with switch upgrade
recommended bios version 3.11a5, driver
2.50.007, 2.70.018 and firmware level 2.82a4 -
LPe1105-HP (Emulex LPe1105-HP 4Gb FC
HBA for HP c-Class Bladesystem (403621-
B21))
0xa
No remark
0x28
recommended bios version 3.11a5
Recommended driver 2.50.007, 2.70.018
No remark
No remark
No remark
No remark
No remark
0x1c
No remark
No remark
No remark
No remark
No remark
Install any of the version which is
recommended bt EMC EMC Solutions
Enabler 7.2, EMC Solutions Enabler 7.2.1,
EMC Solutions Enabler 7.3, EMC Solutions
Enabler 7.3.1, EMC Solutions Enabler 7.3.2,
EMC Solutions Enabler 7.4, EMC Solutions
Enabler 7.5, EMC Solutions Enabler 7.5.1,
EMC Solutions Enabler 7.6
STORPort hotfix 957910 requires the SPC2
No remark
No remark
Install any of the version which is
recommended bt EMC EMC Solutions
Enabler 7.2, EMC Solutions Enabler 7.2.1,
EMC Solutions Enabler 7.3, EMC Solutions
Enabler 7.3.1, EMC Solutions Enabler 7.3.2,
EMC Solutions Enabler 7.4, EMC Solutions
Enabler 7.5, EMC Solutions Enabler 7.5.1,
EMC Solutions Enabler 7.6
Install any of the version which is
recommended bt EMC EMC Solutions
Enabler 7.2, EMC Solutions Enabler 7.2.1,
EMC Solutions Enabler 7.3, EMC Solutions
Enabler 7.3.1, EMC Solutions Enabler 7.3.2,
EMC Solutions Enabler 7.4, EMC Solutions
Enabler 7.5, EMC Solutions Enabler 7.5.1,
EMC Solutions Enabler 7.6
Recommended driver 2.50.007, 2.70.018
Verify the device if not in use, remove from
the system to avoid error
Verify the device if not in use, remove from
the system to avoid error
Verify the device if not in use, remove from
the system to avoid error
Verify the device if not in use, remove from
the system to avoid error
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
EMC PowerPath 5.5, EMC PowerPath 5.5
SP1, EMC PowerPath 5.7
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
No remark
Microsoft STORPort hotfix KB968675
Recommended driver 2.50.007, 2.70.018
No remark
Install any of the version which is
recommended bt EMC EMC Solutions
Enabler 7.2, EMC Solutions Enabler 7.2.1,
EMC Solutions Enabler 7.3, EMC Solutions
Enabler 7.3.1, EMC Solutions Enabler 7.3.2,
EMC Solutions Enabler 7.4, EMC Solutions
Enabler 7.5, EMC Solutions Enabler 7.5.1,
EMC Solutions Enabler 7.6
No issue for switch upgrad
The HBA installaed on the system is
LPe1105-HP (Emulex LPe1105-HP 4Gb FC
HBA for HP c-Class Bladesystem (403621-
B21)) recommended bios version 3.11a5,
driver 2.50.007, 2.70.018 and firmware level
2.82a4
The HBA installaed on the system is
LPe1105-HP (Emulex LPe1105-HP 4Gb FC
HBA for HP c-Class Bladesystem (403621-
B21)) recommended bios version 3.11a5,
driver 2.50.007, 2.70.018 and firmware level
2.82a4
recommended bios version 3.11a5, driver
2.50.007, 2.70.018 and firmware level 2.82a4
recommended bios version 3.11a5, driver
2.50.007, 2.70.018 and firmware level 2.82a4
recommended bios version 3.11a5, driver
2.50.007, 2.70.018 and firmware level 2.82a4
STORPort hotfix 957910 requires
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
0xa
0x28
No remark
No remark
No remark
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
No Ttime out error found
recommended bios version 3.11a5, driver
2.50.007, 2.70.018 and firmware level 2.82a4
recommended bios version 3.11a5, driver
2.50.007, 2.70.018 and firmware level 2.82a4
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
license have to be verify if powerpath is in use
recomended driver version 2.70.018, Bios
2.12a9,firmware 2.82a4
recomended driver version 2.70.018, Bios
2.12a9,firmware 2.82a4
Install any of the version which is
recommended bt EMC EMC Solutions
Enabler 7.2, EMC Solutions Enabler 7.2.1,
EMC Solutions Enabler 7.3, EMC Solutions
Enabler 7.3.1, EMC Solutions Enabler 7.3.2,
EMC Solutions Enabler 7.4, EMC Solutions
Enabler 7.5, EMC Solutions Enabler 7.5.1,
EMC Solutions Enabler 7.6
No remark
No remark
No remark
No remark
No remark
No issue for switch upgrad
The HBA installaed on the system is
LPe1105-HP (Emulex LPe1105-HP 4Gb FC
HBA for HP c-Class Bladesystem (403621-
B21)) recommended bios version 3.11a5,
driver 2.50.007, 2.70.018 and firmware level
2.82a4
No remark
No remark
Name Issue Type
dpaivmwhve01p.sgxdo.sgx.com
dpaivmwhve02p.sgxdo.sgx.com
dsaivmwhve01p.sgxdo.sgx.com
dsaivmwhve04p.sgxdo.sgx.com
dsaivmwhve05p.sgxdo.sgx.com
dsaivmwhve06p.sgxdo.sgx.com
dsaivmwhve07p.sgxdo.sgx.com
dsaivmwhve08p.sgxdo.sgx.com
dsaivmwhve09p.sgxdo.sgx.com
dsaivmwhve10p.sgxdo.sgx.com
dsaivmwhve11p.sgxdo.sgx.com
dsaivmwhve12p.sgxdo.sgx.com
dsaivmwhve13p.sgxdo.sgx.com
dsaivmwhve14p.sgxdo.sgx.com
dsaivmwhve15p.sgxdo.sgx.com
Description HCL Remark
Nos issue detect by EMC grab
Nos issue detect by EMC grab
Nos issue detect by EMC grab
Nos issue detect by EMC grab
Nos issue detect by EMC grab
Nos issue detect by EMC grab
Nos issue detect by EMC grab
Nos issue detect by EMC grab
Nos issue detect by EMC grab
Nos issue detect by EMC grab
Nos issue detect by EMC grab
Nos issue detect by EMC grab
Nos issue detect by EMC grab
Nos issue detect by EMC grab
Nos issue detect by EMC grab
Name Issue Type
cdbal01, cdbnl01, cdbol01,
cdesal01, cdesnl01,
cdesol01, cengal01,
cengnl01, cengol01, crskal01,
crsknl01, crskol01
ClariionHostInteroperability
cdbal01, cdbnl01, cdbol01,
cdesal01, cdesnl01,
cdesol01, cengal01,
cengnl01, cengol01, crskal01,
crsknl01, crskol01
ClariionHostInteroperability
cdbal01, cdesal01, cdesnl01,
cdesol01, cengal01,
cengnl01, cengol01, crskal01,
crsknl01, crskol01
ClariionHostInteroperability
cdbal01, cdesal01, cdesnl01,
cdesol01, cengal01,
cengnl01, cengol01, crskal01,
crsknl01, crskol01
ClariionHostInteroperability
cdbnl01, cdbol01 ClariionHostInteroperability
cdbnl01, cdbol01 ClariionHostInteroperability
cdbnl01, cdesnl01, cengnl01,
crsknl01Veritas
cdbol01, cdesol01, cengol01,
crskol01HBA
cdbol01, cdesol01, cengol01,
crskol01IO Timeout
cdbol01, cdesol01, cengol01,
crskol01SolutionsEnabler
idmbl01 HBA
idmbl01, pdacq01, pddis01,
pddis02, pdorc01, ppacq01,
ppdis01, ppdis02, pporc01,
sapal01, SAPAL03, sapbl01,
sdacq01
Veritas
pdacq01, pddis01, pddis02,
pdorc01, ppacq01, ppdis01,
ppdis02, pporc01, sdacq01
ClariionHostInteroperability
pdacq01, pddis01, pddis02,
pdorc01, ppacq01, ppdis01,
ppdis02, pporc01, sdacq01
ClariionHostInteroperability
pdacq01, pddis01, pddis02,
pdorc01, ppacq01, ppdis01,
ppdis02, pporc01, sdacq01
ClariionHostInteroperability
pdacq01, pddis01, pddis02,
pdorc01, ppacq01, ppdis01,
ppdis02, pporc01, sdacq01
ClariionHostInteroperability
pdacq01, pddis01, pddis02,
pdorc01, ppacq01, ppdis01,
ppdis02, pporc01, sdacq01
HBA
pdacq01, pddis01, pddis02,
pdorc01, ppacq01, ppdis01,
ppdis02, pporc01, sdacq01
HBA
pdacq01, pddis01, pddis02,
pdorc01, ppacq01, ppdis01,
ppdis02, pporc01, sdacq01
HBA
pdacq01, pddis01, pddis02,
pdorc01, ppacq01, ppdis01,
ppdis02, pporc01, sdacq01
HBA
pdacq01, pddis01, pddis02,
ppacq01, ppdis01, ppdis02Capacity
pdacq01, pddis01, pddis02,
ppacq01, ppdis01, ppdis02,
sdacq01
Capacity
pdacq01, pdorc01, ppacq01,
pporc01, sdacq01Basic System Information
pdacq01, pdorc01, ppacq01,
pporc01, sdacq01HBA
pdacq01, ppacq01, sdacq01 Capacity
pddis01 SolutionsEnabler
pddis01 SolutionsEnabler
pddis01, pddis02, ppdis01,
ppdis02Basic System Information
pddis01, pddis02, ppdis01,
ppdis02HBA
pdorc01 Capacity
pdorc01 Capacity
pdorc01, pporc01 Capacity
pdorc01, pporc01 Capacity
pdorc01, pporc01 Capacity
pdorc01, pporc01 Capacity
pdorc01, sdacq01 Capacity
pporc01 Capacity
pporc01 Capacity
pporc01 Capacity
sapal01 Capacity
sapal01 Capacity
sapal01 Capacity
sapal01 Capacity
sapal01 Capacity
SAPAL03 Capacity
sdacq01 Capacity
sdacq01, sddis01, sddis02 Capacity
sdacq01, sddis01, sddis02 Capacity
sdacq01, sddis01, sddis02,
sdorc01, spdis01, spdis02,
sporc01
ClariionHostInteroperability
sdacq01, sddis01, sddis02,
sdorc01, spdis01, spdis02,
sporc01
ClariionHostInteroperability
sdacq01, sddis01, sddis02,
sdorc01, spdis01, spdis02,
sporc01
ClariionHostInteroperability
sdacq01, sddis01, sddis02,
sdorc01, spdis01, spdis02,
sporc01
ClariionHostInteroperability
sdacq01, sddis01, sddis02,
sdorc01, spdis01, spdis02,
sporc01
HBA
sdacq01, sddis01, sddis02,
sdorc01, spdis01, spdis02,
sporc01
HBA
sdacq01, sddis01, sddis02,
sdorc01, spdis01, spdis02,
sporc01
HBA
sdacq01, sddis01, sddis02,
sdorc01, spdis01, spdis02,
sporc01
HBA
sdacq01, sddis01, sddis02,
sdorc01, spdis01, spdis02,
sporc01
Veritas
sdacq01, sdorc01, sporc01 Basic System Information
sdacq01, sdorc01, sporc01 HBA
sddis01 SolutionsEnabler
sddis01 SolutionsEnabler
sddis01, sddis02, spdis01,
spdis02Basic System Information
sddis01, sddis02, spdis01,
spdis02HBA
sddis02 OS Update
sddis02, spdis01, spdis02 OS Update
sddis02, spdis01, spdis02 SolutionsEnabler
sddis02, spdis01, spdis02 SolutionsEnabler
sdorc01 Capacity
sdorc01 Capacity
sdorc01 Capacity
sdorc01 Capacity
sdorc01 Capacity
sdorc01 Capacity
sdorc01 Capacity
spdis01 Capacity
spdis01 Capacity
spdis01 OS Update
spdis02 Capacity
spdis02 Capacity
sporc01 Capacity
sporc01 Capacity
sporc01 Capacity
sporc01 Capacity
sporc01 Capacity
Description HCL Remark
Storage Mgmt SW (Navisphere Host Agent 6.29) is not
recommended by EMC with detected Operating System.
Please refer to the ELAB CLARiiON Host Software
Interoperability Report.
Not required for Switch Upgarde
Unable to find any EMC supported versions for Navisphere
Host Agent 6.29Not required for Switch Upgarde
Unable to find any EMC supported versions for Navisphere
Classic CLI 7.31Not required for Switch Upgarde
Unable to identify Navisphere Classic CLI 7.31 as EMC
Qualified information.Not required for Switch Upgarde
Storage Mgmt SW (Navisphere Classic CLI 6.28) is not
recommended by EMC with detected Operating System.
Please refer to the ELAB CLARiiON Host Software
Interoperability Report.
Not required for Switch Upgarde
Unable to find any EMC supported versions for Navisphere
Classic CLI 6.28Not required for Switch Upgarde
Veritas ASL for EMC INVISTA Arrays not found Not required for Switch Upgarde
EMC qualifies detected HBA model (Emulex LPe1205-HP
8Gb FC HBA for HP c-Class Bladesystem (456972-B21))
but detected HBA Driver version (8.2.0.134) is not at
recommended level.
recomended driver version 2.70.018, Bios
2.12a9,firmware 2.82a4
errorVx disk group timeout error for disk group vg00-
please configure as suggested by Veritas
Unable to identify Solutions Enabler 7.1.1 as EMC Qualified
information.
Install any of the version which is recommended
bt EMC EMC Solutions Enabler 7.2, EMC
Solutions Enabler 7.2.1, EMC Solutions Enabler
7.3, EMC Solutions Enabler 7.3.1, EMC
Solutions Enabler 7.3.2, EMC Solutions Enabler
7.4, EMC Solutions Enabler 7.5, EMC Solutions
Enabler 7.5.1, EMC Solutions Enabler 7.6
EMC qualifies detected HBA model (A8003A-B/FC2242SR
(LPe11002)) but detected HBA Driver version (8.2.0.96.2p)
is not at recommended level. Recommended driver 2.70.018
Veritas ASL file not found
EMC CLARIION Array Support Library not found
Storage Mgmt SW (Navisphere Host Agent 6.29) is not
recommended by EMC with detected Operating System.
Please refer to the ELAB CLARiiON Host Software
Interoperability Report.
Not required for Switch Upgarde
Unable to find any EMC supported versions for Navisphere
Classic CLI 7.30Not required for Switch Upgarde
Unable to find any EMC supported versions for Navisphere
Host Agent 6.29Not required for Switch Upgarde
Unable to identify Navisphere Classic CLI 7.30 as EMC
Qualified information.Not required for Switch Upgarde
HBA is allowed but not listed in an EMC recommended
configuration.
BIOS 2.11a0, Firmware Version 2.82a4, Driver
Version 8.0.16.47 This in kernel driver is only
available on errata kernels equal to or greater than
2.6.9-89.0.18.el Driver is integrated into the kernel
The EMC Qualified Host System information required to
validate the HBA driver for AD168A/FC2243 (LP11002) is
absent, so no recommendations can be made.
BIOS 2.11a0, Firmware Version 2.82a4, Driver
Version 8.0.16.47 This in kernel driver is only
available on errata kernels equal to or greater than
2.6.9-89.0.18.el Driver is integrated into the kernel
The EMC Qualified Host System information required to
validate the HBA firmware for AD168A/FC2243 (LP11002)
is absent, so no recommendations can be made.
BIOS 2.11a0, Firmware Version 2.82a4, Driver
Version 8.0.16.47 This in kernel driver is only
available on errata kernels equal to or greater than
2.6.9-89.0.18.el Driver is integrated into the kernel
This Host Bus Adapter(AD168A/FC2243 (LP11002)) is not
recommended by EMC with detected Operating
System(RHEL [32-Bit] 4.8 AS/ES). Please refer ELAB
Navigator to verify configuration.
BIOS 2.11a0, Firmware Version 2.82a4, Driver
Version 8.0.16.47 This in kernel driver is only
available on errata kernels equal to or greater than
2.6.9-89.0.18.el Driver is integrated into the kernel
Volume Group sgxdeVG contains /dev/dm-1 which is
allocatable (but full)Not required for Switch Upgarde
Volume Group sgxdeVG contains /dev/dm-0 which is
allocatable (but full)Not required for Switch Upgarde
Proliant DL385 did not match any E-Lab Navigator-identified
Host System.Not required for Switch Upgarde
Unable to determine Host System(Proliant DL385)
information.
BIOS 2.11a0, Firmware Version 2.82a4, Driver
Version 8.0.16.47 This in kernel driver is only
available on errata kernels equal to or greater than
2.6.9-89.0.18.el Driver is integrated into the kernel
Volume Group sgxdeVG contains /dev/dm-3 which is
allocatable (but full)Not required for Switch Upgarde
Unable to find any EMC supported versions for Solutions
Enabler 7.0Not required for Switch Upgarde
Unable to identify Solutions Enabler 7.0 as EMC Qualified
information.Not required for Switch Upgarde
Proliant DL585 did not match any E-Lab Navigator-identified
Host System.Not required for Switch Upgarde
Unable to determine Host System(Proliant DL585)
information.
BIOS 2.11a0, Firmware Version 2.82a4, Driver
Version 8.0.16.47 This in kernel driver is only
available on errata kernels equal to or greater than
2.6.9-89.0.18.el Driver is integrated into the kernel
Volume Group oradataVG contains /dev/dm-7 which is
allocatable (but full)Not required for Switch Upgarde
Volume Group oralogVG contains /dev/dm-6 which is
allocatable (but full)Not required for Switch Upgarde
Volume Group oradataVG contains /dev/dm-0 which is
allocatable (but full)Not required for Switch Upgarde
Volume Group oradataVG contains /dev/dm-4 which is
allocatable (but full)Not required for Switch Upgarde
Volume Group oradataVG contains /dev/dm-8 which is
allocatable (but full)Not required for Switch Upgarde
Volume Group oralogVG contains /dev/dm-5 which is
allocatable (but full)Not required for Switch Upgarde
Volume Group sgxdeVG contains /dev/dm-2 which is
allocatable (but full)Not required for Switch Upgarde
Volume Group oralogVG contains /dev/dm-2 which is
allocatable (but full)Not required for Switch Upgarde
Volume Group oralogVG contains /dev/dm-3 which is
allocatable (but full)Not required for Switch Upgarde
Volume Group sgxdeVG contains /dev/dm-7 which is
allocatable (but full)Not required for Switch Upgarde
Mount point /oracle/P01/sapdata1 is 93% full Not required for Switch Upgarde
Mount point /oracle/P01/sapdata2 is 93% full Not required for Switch Upgarde
Mount point /oracle/P01/sapdata3 is 93% full Not required for Switch Upgarde
Mount point /oracle/P01/sapdata4 is 90% full Not required for Switch Upgarde
Mount point /oracle/stage is 96% full Not required for Switch Upgarde
Mount point /oracle/SMR/sapdata2 is 100% full Not required for Switch Upgarde
Volume Group sgxdeVG contains /dev/dm-3 which is
allocatable (but full)Not required for Switch Upgarde
Volume Group sgxdeVG contains /dev/dm-0 which is
allocatable (but full)Not required for Switch Upgarde
Volume Group sgxdeVG contains /dev/dm-2 which is
allocatable (but full)Not required for Switch Upgarde
Storage Mgmt SW (Navisphere Host Agent 6.29) is not
recommended by EMC with detected Operating System.
Please refer to the ELAB CLARiiON Host Software
Interoperability Report.
Not required for Switch Upgarde
Unable to find any EMC supported versions for Navisphere
Classic CLI 7.30Not required for Switch Upgarde
Unable to find any EMC supported versions for Navisphere
Host Agent 6.29Not required for Switch Upgarde
Unable to identify Navisphere Classic CLI 7.30 as EMC
Qualified information.Not required for Switch Upgarde
HBA is allowed but not listed in an EMC recommended
configuration.Not required for Switch Upgarde
The EMC Qualified Host System information required to
validate the HBA driver for AD168A/FC2243 (LP11002) is
absent, so no recommendations can be made.
BIOS 2.11a0, Firmware Version 2.82a4, Driver
Version 8.0.16.47 This in kernel driver is only
available on errata kernels equal to or greater than
2.6.9-89.0.18.el Driver is integrated into the kernel
The EMC Qualified Host System information required to
validate the HBA firmware for AD168A/FC2243 (LP11002)
is absent, so no recommendations can be made.
BIOS 2.11a0, Firmware Version 2.82a4, Driver
Version 8.0.16.47 This in kernel driver is only
available on errata kernels equal to or greater than
2.6.9-89.0.18.el Driver is integrated into the kernel
This Host Bus Adapter(AD168A/FC2243 (LP11002)) is not
recommended by EMC with detected Operating
System(RHEL [32-Bit] 4.8 AS/ES). Please refer ELAB
Navigator to verify configuration.
BIOS 2.11a0, Firmware Version 2.82a4, Driver
Version 8.0.16.47 This in kernel driver is only
available on errata kernels equal to or greater than
2.6.9-89.0.18.el Driver is integrated into the kernel
Veritas ASL file not found
EMC CLARIION Array Support Library not found
Proliant DL385 did not match any E-Lab Navigator-identified
Host System.Not required for Switch Upgarde
Unable to determine Host System(Proliant DL385)
information.
BIOS 2.11a0, Firmware Version 2.82a4, Driver
Version 8.0.16.47 This in kernel driver is only
available on errata kernels equal to or greater than
2.6.9-89.0.18.el Driver is integrated into the kernel
Software Enabler (Solutions Enabler 6.4 (EOSL)) is not
recommended by EMC with detected Operating System and
Storage Array(s). Please refer to the ELAB Software
Enabler Report.
Not required for Switch Upgarde
Unable to find any EMC supported versions for Solutions
Enabler 6.4 (EOSL)Not required for Switch Upgarde
Proliant DL585 did not match any E-Lab Navigator-identified
Host System.Not required for Switch Upgarde
Unable to determine Host System(Proliant DL585)
information.
BIOS 2.11a0, Firmware Version 2.82a4, Driver
Version 8.0.16.47 This in kernel driver is only
available on errata kernels equal to or greater than
2.6.9-89.0.18.el Driver is integrated into the kernel
Symmetrix Microcode Patch Level 5671.80 is not at the
latest Patch Level 5671.82Not required for Switch Upgarde
Symmetrix Microcode Patch Level 5671.75 is not at the
latest Patch Level 5671.82Not required for Switch Upgarde
Software Enabler (Solutions Enabler 6.3 (EOSL)) is not
recommended by EMC with detected Operating System and
Storage Array(s). Please refer to the ELAB Software
Enabler Report.
Not required for Switch Upgarde
Unable to find any EMC supported versions for Solutions
Enabler 6.3 (EOSL)
Install any of the version which is recommended
bt EMC EMC Solutions Enabler 7.2, EMC
Solutions Enabler 7.2.1, EMC Solutions Enabler
7.3, EMC Solutions Enabler 7.3.1, EMC
Solutions Enabler 7.3.2, EMC Solutions Enabler
7.4, EMC Solutions Enabler 7.5, EMC Solutions
Enabler 7.5.1, EMC Solutions Enabler 7.6
Mount point /opt is 100% full
Mount point /oracle/log3 is 100% full Not required for Switch Upgarde
Volume Group oradataVG contains /dev/dm-1 which is
allocatable (but full)Not required for Switch Upgarde
Volume Group oradataVG contains /dev/dm-2 which is
allocatable (but full)Not required for Switch Upgarde
Volume Group oradataVG contains /dev/dm-3 which is
allocatable (but full)Not required for Switch Upgarde
Volume Group oralogVG contains /dev/dm-4 which is
allocatable (but full)Not required for Switch Upgarde
Volume Group oralogVG contains /dev/dm-6 which is
allocatable (but full)Not required for Switch Upgarde
Volume Group sgxdeVG contains /dev/mpath/mpath12p1
which is allocatable (but full)Not required for Switch Upgarde
Volume Group sgxdeVG contains /dev/mpath/mpath13p1
which is allocatable (but full)Not required for Switch Upgarde
Symmetrix Microcode Patch Level 5773.138 is not at the
latest Patch Level 5773.176Not required for Switch Upgarde
Volume Group sgxdeVG contains /dev/dm-4 which is
allocatable (but full)Not required for Switch Upgarde
Volume Group sgxdeVG contains /dev/dm-5 which is
allocatable (but full)Not required for Switch Upgarde
Volume Group oradataVG contains /dev/dm-15 which is
allocatable (but full)Not required for Switch Upgarde
Volume Group oradataVG contains /dev/dm-8 which is
allocatable (but full)Not required for Switch Upgarde
Volume Group oradataVG contains /dev/dm-9 which is
allocatable (but full)Not required for Switch Upgarde
Volume Group oralogVG contains /dev/dm-10 which is
allocatable (but full)Not required for Switch Upgarde
Volume Group oralogVG contains /dev/dm-11 which is
allocatable (but full)Not required for Switch Upgarde
Name Issue Type
ESXEKV01, ESXEKV02 HBA
ESXEKV01, ESXEKV02,
ESXSKV01, ESXSKV02,
ESXTKV01, ESXTKV02
HBA
ESXSKV01, ESXSKV02,
ESXTKV01, ESXTKV02HBA
ESXSKV02 PowerPath
ESXSKV02 PowerPath
ESXSKV02 PowerPath
ESXSKV02 PowerPath
ESXSKV02 PowerPath
ESXSKV02 PowerPath
ESXSKV02 PowerPath
ESXSKV02 PowerPath
ESXSKV02 PowerPath
ESXSKV02 PowerPath
ESXSKV02 PowerPath
ESXSKV02 PowerPath
ESXSKV02 PowerPath
ESXSKV02 PowerPath
ESXSKV02 PowerPath
ESXSKV02 PowerPath
ESXSKV02 PowerPath
ESXSKV02 PowerPath
ESXEPV02 HBA
ESXEPV02, ESXSPV01 HBA
ESXSPV01 HBA
ESXSPV01, ESXTPV01 PowerPath
ESXTPV01 HBA
Description
EMC qualifies detected HBA model (Emulex LPe1205-HP 8Gb FC HBA for HP c-Class Bladesystem
(456972-B21)) but detected HBA Firmware version (2.00A4) is not at recommended level.
EMC qualifies detected HBA model (Emulex LPe1205-HP 8Gb FC HBA for HP c-Class Bladesystem
(456972-B21)) but detected HBA Driver version (8.2.1.79.28) is not at recommended level.
EMC qualifies detected HBA model (Emulex LPe1205-HP 8Gb FC HBA for HP c-Class Bladesystem
(456972-B21)) but detected HBA Firmware version (1.11A5) is not at recommended level.
MultiPath device vmhba0:C0:T0:L16 has policy: standby
MultiPath device vmhba0:C0:T0:L17 has policy: standby
MultiPath device vmhba0:C0:T0:L18 has policy: standby
MultiPath device vmhba0:C0:T0:L8 has policy: standby
MultiPath device vmhba0:C0:T1:L16 has policy: standby
MultiPath device vmhba0:C0:T1:L17 has policy: standby
MultiPath device vmhba0:C0:T1:L18 has policy: standby
MultiPath device vmhba0:C0:T1:L8 has policy: standby
MultiPath device vmhba0:C0:T2:L15 has policy: standby
MultiPath device vmhba0:C0:T2:L7 has policy: standby
MultiPath device vmhba1:C0:T0:L15 has policy: standby
MultiPath device vmhba1:C0:T0:L7 has policy: standby
MultiPath device vmhba1:C0:T1:L15 has policy: standby
MultiPath device vmhba1:C0:T1:L7 has policy: standby
MultiPath device vmhba1:C0:T2:L16 has policy: standby
MultiPath device vmhba1:C0:T2:L17 has policy: standby
MultiPath device vmhba1:C0:T2:L18 has policy: standby
MultiPath device vmhba1:C0:T2:L8 has policy: standby
EMC qualifies detected HBA model (Emulex LPe1205-HP 8Gb FC HBA for HP c-Class Bladesystem
(456972-B21)) but detected HBA Firmware version (2.00A4) is not at recommended level.
EMC qualifies detected HBA model (Emulex LPe1205-HP 8Gb FC HBA for HP c-Class Bladesystem
(456972-B21)) but detected HBA Driver version (8.2.1.79.28) is not at recommended level.
EMC qualifies detected HBA model (Emulex LPe1205-HP 8Gb FC HBA for HP c-Class Bladesystem
(456972-B21)) but detected HBA Firmware version (1.11A5) is not at recommended level.
MultiPath enabled with less than two paths.
No CIM provider installed for Emulex based Host Bus Adapter
HCL Remark
Recommended firmware 2.01a4
In-box driver
Recommended firmware 2.01a4
Recommended firmware 2.01a4
In-box driver
Recommended firmware 2.01a4
naa.60060480000290103372533030353736 vmhba5:C0:T3:L32
Cannot detect the driver
Recommended