View
243
Download
1
Category
Preview:
Citation preview
8/8/2019 17683666 Caustic Soda Manufacture
1/14
vBrine saturation process.
vPurification process.
v
Cell House-Electrolytic process.
Caustic Soda Manufacture.
By
NarendraPrasath R,
8/8/2019 17683666 Caustic Soda Manufacture
2/14
8/8/2019 17683666 Caustic Soda Manufacture
3/14
Precipitation tank:Precipitation is done by adding 10% NaOH
,
10% MgSO4, 10% Ba2CO 3 in the tank.Flocculant agents like magna floc are added toform flocwhich is removed. This is sent to the
Clarifier.
From saturation tank.To clarifier
precipitation
8/8/2019 17683666 Caustic Soda Manufacture
4/14
Clarifier : The brine isconcentrated by using a centrifugal pump andthe principle of sedimentation.
Over Flow.
Fromppt
Clarifier
Forpurificatio
8/8/2019 17683666 Caustic Soda Manufacture
5/14
Purification is done by anthracite and by ion-exchange method.
Anthracite filters use porous anthracite coalarranged in beds. Cleaning is done bybackflushing.
Ion exchangers have -cellulose tightly packedin tubular sieves. They absorb finner particlesand produce ULTRA PURE BRINE(99.9%) whichis sent to the cell house for electrolysis.
PurificationPurification
8/8/2019 17683666 Caustic Soda Manufacture
6/14
Anthracite Ion
ULTRA PURE BRINE
Purification ProcessPurification Process
8/8/2019 17683666 Caustic Soda Manufacture
7/14
vUltra pure brine is electrolysed.vThe lye produced is collected and sent to triple
effect evaporator, for further concentration.
vThe concentrated lye is filled in drums.
vTo form flakes, the lye is sent to the furnace
which is maintained at 450C by burningnitrates. The water is evaporated and then it iscut by rotating blades.
Electrolytic Process.
8/8/2019 17683666 Caustic Soda Manufacture
8/14
Electrolytic Cell Process
8/8/2019 17683666 Caustic Soda Manufacture
9/14
Used as base in chemical industries, Labs fortitraion purposes.
High demand in soap manufacturing industrieslike Hindustan Lever ltd.
Used in hair straightening process, performedby professionals.
In paper industry, forms the main componentof white liquor, bleaching agent of brown pulp,to maintain the pH > 10.5.
And many more
Uses of Caustic Soda
8/8/2019 17683666 Caustic Soda Manufacture
10/14
The major product is Cautic soda or Lye.Lean brine is sent for recycle, after removing
Cl2.
Hydrogen produced is completely burned withchlorine gas to produce HCl, used in industries.Chlorine is also separately filled in drums and
sold.
The sludge produced is dried, powdered andused as Nfhyk; powder.
Usage of the by products
8/8/2019 17683666 Caustic Soda Manufacture
11/14
The major raw material is only salt, directlyproduced from salt pans.(Very low cost)
Major product is lye, the by-products likehydrogen and chlorine is used for HCl
production and certain amount of Hydrogen isused for burning process instead ofcoal.(Energy utilization)
The ultimate waste is only the sludge and the
flue gases sent out after reused for heatingpurposes.
The by-prods are of high commercial demand,
Highlight of this plant
8/8/2019 17683666 Caustic Soda Manufacture
12/14
Eye glass: The reaction of lye and moisture isexothermic, and can cause blindness if comesin eye contact.
Helmet: To avoid impacts on the skull.Gloves: Handling flakes can cause burns
without rubber gloves over the hand.
Safety and Hazards
8/8/2019 17683666 Caustic Soda Manufacture
13/14
The cost of each membrane used is in lakhs, sothe total cost of membranes reaches crores.
The maintanence of membrane is veryimportant since any chlorine ion reaching the
other electrode causes short circuit.Hence high initial and maintainance cost.Coastal area for easy availability of salt and
water. And need for ports to transport, exportthrough ships and tankers.
Need for large area.
Disadvantages
8/8/2019 17683666 Caustic Soda Manufacture
14/14
THE ENDThanks for your presence!
Recommended