View
2
Download
0
Category
Preview:
Citation preview
1986 www.hettich.com
1987Technik für Möbel
Desk support frames Summary 1988 - 1989
Table legs Summary 2034 - 2035
Furniture feet Summary 2034 - 2035
Table extension slides Summary 2064 - 2065
Desk and table support frames, table legs, furniture feet and table extension slidesSummary of ranges
1988 www.hettich.com
Change Top table column: simple, elegant system. Power-assisted or manual adjustment: 611 - 1261 mm: power-assisted 600 - 800 mm: manual
Change Top Flex: height adjust-ment either power-assisted, in manually engaged stages or with crank system. Suitable for different table shapes.
Change Top round column: effort-less height adjustment by means of gas pressure.
Time to move more! Working constantly in the same position is not only bad for concentration but in the long run also for your health. Experts recommend changing your posture at the desk as often as possible and alternating between sitting and standing, for example. Hard to do in everyday work routine? Not at all.
Because that‘s what Hettich Technik für Möbel is there for. For instance, the height-adjustable Change Top desk column: adjusts to any working height by power assistance, gas pressure or manually. Keeps the back healthy and staff in a good mood.
Desk support frames
1989Technik für Möbel
Change Top Range summary / Technical comparison 1990 - 1991 Planning dimensions 1997
Change Top Flex Range summary / Technical comparison 1998 - 1999 Planning dimensions 2005
Change Top round column 2006
Change Summary 2008 - 2009
Technical Information Quality criteria 2032
Desk support framesSummary
1990 www.hettich.com
Eco
Page
Lifting height
For tabletop widths
Cross member
Loading capacity
Height adjustment
For tabletop depth
1992
680 - 1150 mm Motor-driven
470 mm
-
100 kg
Width adjustable 900 - 1600 mm
800 mm
900 - 1800 mm
Special features
Basic
1993
470 mm
1200 - 2000 mm
Width adjustable 1120 - 1900 mm
100 kg
693 - 1163 mm Motor-driven
800 mm
90° angle combination possible
Pro
1994
650 mm
1200 - 2000 mm
Width adjustable 1120 - 1900 mm
100 kg
611 - 1261 mm Motor-driven
800 mm
90° angle combination possible
Desk support frames Change TopRange summary / Technical comparison
1991Technik für Möbel
Manual
1995
200 mm
1200 - 2000 mm
Width adjustable 1120 - 1900 mm
100 kg
600 - 800 mm Manual, infinitely variable
800 mm
90° angle combination possible
Accessories
1996
Desk support frames Change TopRange summary / Technical comparison
1992 www.hettich.com
HettCAD
Eco
730
296
40
27
68
680
1150
18
40
Fully power height-adjustable desk support frame For 800 x 900 - 1800 mm desktops (depth x width) Height adjustment from 680 - 1150 mm, lift 470 mm Width-adjustable cross member, from 900 - 1600 mm Nominal voltage 230 V / 240 V, 50Hz Max. lifting capacity 100 kg with even desk loading
(Lifting capacity = loading capacity + tabletop weight) Powder-coated steel in aluminium look
Set comprises: 2 columns 2 foot extensions 2 cross members 1 synchronising shaft 1 control system 1 hand switch 1 HV feeder with 3000 mm and flat Euro-plug Fixing material
Order no. PU
9 132 982 1 set
Desk support frame Change TopEcoWith power-assisted height adjustment, lift 470 mm
1993Technik für Möbel
HettCAD
Basic
725
296
40
30
55,5
693
116320
Fully power height-adjustable desk support frame For 800 x 1200 - 2000 mm desktops (depth x width) Height adjustment from 693 - 1163 mm, lift 470 mm Width-adjustable cross member, from 1120 - 1900 mm Nominal voltage 230 V / 240 V, 50Hz Max. lifting capacity 100 kg with even desk loading
(Lifting capacity = loading capacity + tabletop weight) Powder-coated steel in aluminium look
Set comprises: 2 columns 2 foot extensions 2 cross members 1 control system 1 hand switch 1 HV feeder with 3000 mm lead and right-angle plug Fixing material
Order no. PU
9 132 983 1 set
Basic 90°
500
296
40
30
55,5
693
116320
Upgrade set for power height-adjustable desk support frame with 90° link
For 800 x 1200 - 2000 mm desktops (depth x width) Height adjustment from 693 - 1163 mm, lift 470 mm Width-adjustable cross member, from 1120 - 1900 mm Nominal voltage 230 V / 240 V, 50Hz Max. lifting capacity 100 kg with even desk loading
(Lifting capacity = loading capacity + tabletop weight) Powder-coated steel in aluminium look
Set comprises: 1 column 1 foot extension 2 cross members Fixing material
Order no. PU
9 132 984 1 set
Desk support frame Change TopBasicWith power-assisted height adjustment, lift 470 mm
1994 www.hettich.com
HettCAD
Pro
725
296
40
30
56,5
611
1261
20
Fully power height-adjustable desk support frame For 800 x 1200 - 2000 mm desktops (depth x width) Height adjustment from 611 - 1261 mm, lift 650 mm Width-adjustable cross member, from 1120 - 1900 mm Nominal voltage 230 V / 240 V, 50Hz Max. lifting capacity 100 kg with even desk loading
(Lifting capacity = loading capacity + tabletop weight) Powder-coated steel in aluminium look
Set comprises: 2 columns 2 foot extensions 2 cross members 1 control system 1 hand switch 1 HV feeder with 3000 mm lead and right-angle plug Fixing material
Order no. PU
9 132 985 1 set
Pro 90°
500
296
40
30
56,5
611
1261
20
Upgrade set for power height-adjustable desk support frame with 90° link
For 800 x 1200 - 2000 mm desktops (depth x width) Height adjustment from 611 - 1261 mm, lift 650 mm Width-adjustable cross member, from 1120 - 1900 mm Nominal voltage 230 V / 240 V, 50Hz Max. lifting capacity 100 kg with even desk loading
(Lifting capacity = loading capacity + tabletop weight) Powder-coated steel in aluminium look
Set comprises: 1 column 1 foot extension 2 cross members Fixing material
Order no. PU
9 132 986 1 set
Desk support frame Change TopProWith power-assisted height adjustment, lift 650 mm
1995Technik für Möbel
HettCAD
Manual
725
296
40
30
55,5
600
80020
Fully manually height-adjustable desk support frame For 800 x 1200 - 2000 mm desktops (depth x width) Infinite manual height adjustment from 600 - 800 mm,
lift 200 mm Width-adjustable cross member, from 1120 - 1900 mm Powder-coated steel in aluminium look
Set comprises: 2 columns 2 foot extensions 2 cross members Fixing material
Order no. PU
9 132 987 1 set
Manual 90°
500
296
40
30
55,5
600
80020
Upgrade set for manually height-adjustable desk support frame with 90° link
For 800 x 1200 - 2000 mm desktops (depth x width) Infinite manual height adjustment from 600 - 800 mm,
lift 200 mm Width-adjustable cross member, from 1120 - 1900 mm Powder-coated steel in aluminium look
Set comprises: 1 column 1 foot extension 2 cross members Fixing material
Order no. PU
9 132 988 1 set
Desk support frame Change TopManualManual height adjustment, lift 200 mm
1996 www.hettich.com
25795
25
Stabilising bracket
Side connection for stabilising the desktop Steel, aluminium look
Order no. PU
9 132 990 2 ea.
Stabilising bracket
400
780
183
30
130313,5
375
Side connection for stabilising and vertically adjusting the desktop Including front panel connector Steel, aluminium look
Order no. PU
9 132 989 2 ea.
870 - 1470
Cable trunking
Variable in width from 870 - 1470 mm For screw-mounting to the cross member or desktop Steel, aluminium look
Order no. PU
9 132 991 1 ea.
Desk support frame Change TopAccessories
1997Technik für Möbel
HettCAD
Planning dimensions Eco
ø 3,5 x 16ø 4,5 x 20
900 - 1800800
Planning dimensions Basic, Pro and Manual
ø 3,5 x 16
ø 4,5 x 20
ø 5 x 55
800 1200 - 2000
ø 3,5 x 16
ø 4,5 x 20
ø 5 x 55
800
1200 - 2000
1200 - 2000
Desk support frame Change TopPlanning dimensions
1998 www.hettich.com
Pro
Page
Lifting height
For tabletop widths
Loading capacity
Special features
Height adjustment
For tabletop depth
2000
625 - 1275 mm Motor-driven
650 mm
90° angle combination possible
100 kg
800 mm
1200 - 1600 mm 1600 - 2000 mm
Basic
2001
500 mm
1200 - 1600 mm 1600 - 2000 mm
100 kg
90° angle combination possible
655 - 1155 mm Motor-driven
800 mm
Manual
2002
240 mm
1200 - 1600 mm 1600 - 2000 mm
100 kg
90° angle combination possible
655 - 895 mm Toolless in engaged stages
800 mm
Desk support frames Change Top FlexRange summary / Technical comparison
1999Technik für Möbel
Crank
2003
240 mm
1200 - 1600 mm 1600 - 2000 mm
100 kg
655 - 895 mm by hand crank
800 mm
Accessories
2004
Desk support frames Change Top FlexRange summary / Technical comparison
2000 www.hettich.com
HettCAD
Pro
800
2540
520
625 - 1275
70
760
Fully power height-adjustable desk support frame For 800 x 1200 - 1600 mm desktops (depth x width) and
800 x 1600 - 2000 mm (depth x width) Height adjustment from 625 - 1275 mm, lift 650 mm Width-adjustable support, from 1200 - 1600 mm and
1600 - 2000 mm With collision protection (no personal protection) Nominal voltage 230 V / 240 V, 50Hz Max. lifting capacity 100 kg with even desk loading
(Lifting capacity = loading capacity + tabletop weight) Powder-coated steel in aluminium look
Set comprises: 2 columns 2 foot extensions 1 support 1 control system 1 hand switch 1 HV feeder with 1800 mm lead and right-angle plug Fixing material
Table width, mm Order no. PU
1200 - 1600 9 133 000 1 set
1600 - 2000 9 133 001 1 set
Pro 90°
800
2540
520
625 - 1275
70
760
Upgrade set for power height-adjustable desk support frame with 90° link
For 800 x 1600 - 1800 mm desktops (depth x width) Height adjustment from 625 - 1275 mm, lift 650 mm Width-adjustable support, from 1600 - 1800 mm With collision protection (no personal protection) Nominal voltage 230 V / 240 V, 50Hz Max. lifting capacity 120 kg with even desk loading
(Lifting capacity = loading capacity + tabletop weight) Powder-coated steel in aluminium look
Set comprises: 1 column 1 foot extension 1 support 1 program dongle 1 motor extension lead Fixing material
Table width, mm Order no. PU
1600 - 1800 9 133 002 1 set
Desk support frame Change Top FlexProWith power-assisted height adjustment, lift 650 mm
2001Technik für Möbel
HettCAD
Basic
800
2540
520
655 - 1155
70
760
Fully power height-adjustable desk support frame For 800 x 1200 - 1600 mm desktops (depth x width) and
800 x 1600 - 2000 mm (depth x width) Height adjustment from 655 - 1155 mm, lift 500 mm Width-adjustable support, from 1200 - 1600 mm and
1600 - 2000 mm With collision protection (no personal protection) Nominal voltage 230 V / 240 V, 50Hz Max. lifting capacity 100 kg with even desk loading
(Lifting capacity = loading capacity + tabletop weight) Powder-coated steel in aluminium look
Set comprises: 2 columns 2 foot extensions 1 support 1 control system 1 hand switch 1 HV feeder with 1800 mm lead and right-angle plug Fixing material
Table width, mm Order no. PU
1200 - 1600 9 132 997 1 set
1600 - 2000 9 132 998 1 set
Basic 90°
800
2540
520
655 - 1155
70
760
Upgrade set for power height-adjustable desk support frame with 90° link
For 800 x 1600 - 1800 mm desktops (depth x width) Height adjustment from 655 - 1155 mm, lift 500 mm Width-adjustable support, from 1600 - 1800 mm With collision protection (no personal protection) Nominal voltage 230 / 240 V / 50Hz Max. lifting capacity 120 kg with even desk loading
(Lifting capacity = loading capacity + tabletop weight) Powder-coated steel in aluminium look
Set comprises: 1 column 1 foot extension 1 support 1 program dongle 1 motor extension lead Fixing material
Table width, mm Order no. PU
1600 - 1800 9 132 999 1 set
Desk support frame Change Top FlexBasicWith power-assisted height adjustment, lift 500 mm
2002 www.hettich.com
HettCAD
Manual
800
2540
520
655 - 895
70
760
Fully manually height-adjustable desk support frame For 800 x 1200 - 1600 mm desktops (depth x width) and
800 x 1600 - 2000 mm (depth x width) Manual toolless height adjustment from 655 - 895 mm in engaged
stages of 20 mm, total lift 240 mm Width-adjustable support, from 1200 - 1600 mm and
1600 - 2000 mm Powder-coated steel in aluminium look
Set comprises: 2 columns 2 foot extensions 1 support Fixing material
Table width, mm Order no. PU
1200 - 1600 9 132 992 1 set
1600 - 2000 9 132 993 1 set
Manual 90°
800
2540
520
655 - 895
70
760
Upgrade set for manually height-adjustable desk support frame with 90° link
For 800 x 1600 - 1800 mm desktops (depth x width) Height adjustment from 655 - 895 mm, lift 240 mm Width-adjustable support, from 1600 - 1800 mm Powder-coated steel in aluminium look
Set comprises: 1 column 1 foot extension 1 support Fixing material
Table width, mm Order no. PU
1600 - 1800 9 132 994 1 set
Desk support frame Change Top FlexManualHeight adjustment in engaged stages, total lift 240 mm
2003Technik für Möbel
HettCAD
Crank
800
2540
520
655 - 895
70
760
Fully height-adjustable desk support frame by means of hand crank For 800 x 1200 - 1600 mm desktops (depth x width) and
800 x 1600 - 2000 mm (depth x width) Manual height adjustment by hand crank from 655 - 895 mm,
240 mm lift Width-adjustable support, from 1200 - 1600 mm and
1600 - 2000 mm Powder-coated steel in aluminium look
Set comprises: 2 columns 2 foot extensions 1 support 1 synchronising shaft 1 hand crank Fixing material
Table width, mm Order no. PU
1200 - 1600 9 132 995 1 set
1600 - 2000 9 132 996 1 set
Desk support frame Change Top FlexCrankHeight adjustment via crank, lift 240 mm
2004 www.hettich.com
720
150
81,521
Cable trunking
For screw-mounting to the desktop Length 720 mm Depth 150 mm Steel, powder-coated black
Order no. PU
9 133 003 1 ea.
Network port
Clip for securing power and data lines under the desk top One RJ 45 network port and one earthed socket outlet Cable length 900 mm
Order no. PU
9 133 004 1 ea.
Desk support frame Change Top FlexAccessories
2005Technik für Möbel
2-pillar table frame Max. lifting capacity 100 kg with even desk loading Lifting capacity = loading capacity + tabletop weight
3-pillar table frame Max. lifting capacity 120 kg with even desk loading Lifting capacity = loading capacity + tabletop weight
Planning dimensions
1200 - 1600 /1600 - 2000
800 800
50 50
400
1600 - 2000
50
1600 - 1800
400
50
800
50
800
Desk support frame Change Top FlexPlanning dimensions
2006 www.hettich.com
HettCAD
Round column and fold-down tabletop with swivel base
695
25
720
380
375
700
≤ 800
Infinite height adjustment by means of gas pressure operated fast adjuster
Max. tabletop diameter 800 mm Height adjustment from 625 - 1075 mm, lift 380 mm Operated by hand switch Lifting capacity 8 - 12 kg (lifting capacity = loading capacity
+ tabletop weight) Tabletop folds down to save space in transit and storage 5-arm swivel base including castors Powder-coated steel in aluminium look
Order no. PU
9 139 971 1 ea.
Round column and fold-down tabletop with fixed foot plate
655
25
680
450
375
520
≤ 800
Infinite height adjustment by means of gas pressure operated fast adjuster
Max. tabletop diameter 800 mm Height adjustment from 655 - 1105 mm, lift 450 mm Operated by hand switch Lifting capacity 8 - 12 kg (lifting capacity = loading capacity
+ tabletop weight) Tabletop folds down to save space in transit and storage Powder-coated steel in aluminium look
Order no. PU
9 139 972 1 ea.
Desk support frame Change Top round columnHeight adjustment by means of gas pressure
2007Technik für Möbel
2008 www.hettich.com
Change Basic desk support frame: with and without height adjust-ment. Two attractive finishes.
Change 2-leg desk support frame: Elegant, slim-line table frame. With and without height adjust-ment.
Change Formal: Designer-style desk support frame in 2 different heights.
Change Plus desk support frame: Configure your desk in any way using prefabricated modules: 3 mounting crosses, 3 columns, 3 base plates.
Form and function in a perfect symbiosis: Hettich Change desk support frames are available with and without manual
height adjustment capability, in different formal concepts and with a choice of two designer legs.
Change desk support frames
2009Technik für Möbel
Change Basic aluminium look gloss 2010 - 2013 Change Basic aluminium look 2014 - 2017 Configuration examples 2018 - 2019
Change Arta 2020 Configuration example 2021
Change 2-leg 2022 - 2024 Configuration example 2024
Change Formal 2025 - 2026 Configuration example 2027
Change Plus 2028 - 2031 Summary of configurations 2028
Technical Information Quality criteria 2032
Change desk support framesSummary
2010 www.hettich.com
HettCAD
685
695
261
634
480384
82
100
T base
For use on left / right With + 15 mm floor levelling via adjusting screw Loading capacity of 100 kg / m² including table top with even load
distribution Powder-coated steel in polished aluminium look
Order no. PU
9 078 729 1 ea.
695
485161
634
100
480384
82
T linking leg
For use on left / right With + 15 mm floor levelling via adjusting screw Loading capacity of 100 kg / m² including table top with even load
distribution Powder-coated steel in polished aluminium look
Order no. PU
9 078 738 1 ea.
695
685130
480384
634
100
82
100
C base
For use on left / right With + 15 mm floor levelling via adjusting screw Loading capacity of 100 kg / m² including table top with even load
distribution Powder-coated steel in polished aluminium look
Order no. PU
9 078 746 1 ea.
480384
48570
100
82
100
695 634
C linking leg
For use on left / right With + 15 mm floor levelling via adjusting screw Loading capacity of 100 kg / m² including table top with even load
distribution Powder-coated steel in polished aluminium look
Order no. PU
9 078 749 1 ea.
Desk support frame Change BasicBasic and linking legs
2011Technik für Möbel
HettCAD
480384
685
525 590-
790
261
82
100
T base with height-adjustment capability
For use on left / right Toolless height adjustment from 590 - 790 mm in engaged stages of
10 mm Loading capacity of 100 kg / m² including table top with even load
distribution Powder-coated steel in polished aluminium look
Order no. PU
9 078 741 1 ea.
480384
525 590-
790
485161
100
82
T linking leg with height-adjustment capability
For use on left / right Toolless height adjustment from 590 - 790 mm in engaged stages of
10 mm Loading capacity of 100 kg / m² including table top with even load
distribution Powder-coated steel in polished aluminium look
Order no. PU
9 078 744 1 ea.
480384
685
525590
-790
130
100
82
100
C base with height-adjustment capability
For use on left / right Toolless height adjustment from 590 - 790 mm in engaged stages of
10 mm Loading capacity of 100 kg / m² including table top with even load
distribution Powder-coated steel in polished aluminium look
Order no. PU
9 078 751 1 ea.
480384
590-
790
48570
100
82
525
100
C linking leg with height-adjustment capability
For use on left / right Toolless height adjustment from 590 - 790 mm in engaged stages of
10 mm Loading capacity of 100 kg / m² including table top with even load
distribution Powder-coated steel in polished aluminium look
Order no. PU
9 078 752 1 ea.
Desk support frame Change BasicBasic and linking legs
2012 www.hettich.com
HettCAD
L
103
Change Basic cross member
Can be mounted and adjusted without tools Screw connections are not required Powder-coated steel in polished aluminium look
Length mm For table width, mm
Order no. PU
660 - 1060 800 - 1200 9 078 757 1 ea.
1060 - 1860 1200 - 2000 9 078 759 1 ea.
L
103
Change Basic cross-member for add-on connection
For add-on connection of angled solutions Can be mounted and adjusted without tools Screw connections are not required Powder-coated steel in polished aluminium look
Length mm For table width, mm
Order no. PU
600 - 1060 800 - 1200 9 078 762 1 ea.
1060 - 1860 1200 - 2000 9 078 764 1 ea.
200
69580
65172
12830
Singapore round column
For 90° angled tables and conference tables Can be combined with Change cross-member, see above With + 15 mm floor levelling via adjusting screw Powder-coated steel in polished aluminium look
Order no. PU
9 078 768 1 ea.
480
8
65
4846
384
5490°
159515590 - 790
Singapore round column with height adjustment capability
For 90° angled tables and conference tables Toolless height adjustment from 590 - 790mm in engaged stages
10 mm Can be combined with Change cross-member, see above Powder-coated steel in polished aluminium look
Order no. PU
9 133 021 1 ea.
Desk support frame Change BasicCross members / round column
2013Technik für Möbel
65
2
40
12,5
12,5 6590
6
6
ø 6
Connecting plate for angled solutions
Powder-coated steel in aluminum look
Order no. PU
0 048 443 1/2 ea.
634
90
100
56
525
90
100
56
Plain cover panel
Can be clipped on without tools Powder-coated steel in polished aluminium look
Article Height mm Order no. PU
With height adjustment
634 9 078 772 1 ea.
With height adjustment
525 9 078 778 1 ea.
634
90
100
56
525
90
100
56
Square cover panel
Can be clipped on without tools Powder-coated steel in polished aluminium look
Article Height mm Order no. PU
With height adjustment
634 9 078 770 1 ea.
With height adjustment
525 9 078 776 1 ea.
Desk support frame Change BasicConnecting plate / cover panels
2014 www.hettich.com
HettCAD
700
695
276
480384
74
110166
T base
With + 15 mm floor levelling via adjusting screw Loading capacity of 100 kg / m² including table top with even load
distribution Powder-coated steel in aluminium look Left and right leg packed as pair
Order no. PU
9 133 005 1 pair
580
695
216
480384
74
110166
T linking leg
For use on left / right With + 15 mm floor levelling via adjusting screw Loading capacity of 100 kg / m² including table top with even load
distribution Powder-coated steel in aluminium look
Order no. PU
9 133 006 1 ea.
700
695
130
480384
74
110100
C base
With + 15 mm floor levelling via adjusting screw Loading capacity of 100 kg / m² including table top with even load
distribution Powder-coated steel in aluminium look Left and right leg packed as pair
Order no. PU
9 133 008 1 pair
580
695
130
480384
74
100
110
C linking leg
With + 15 mm floor levelling via adjusting screw Loading capacity of 100 kg / m² including table top with even load
distribution Powder-coated steel in aluminium look
Article Order no. PU
Left leg 9 133 009 1 ea.
Right leg 9 133 010 1 ea.
Desk support frame Change BasicBasic and linking legs
2015Technik für Möbel
HettCAD
590-
790
167,5
72,5
700276
384480
110
T base with height-adjustment capability
Height adjustment from 590 - 790 mm in engaged stages of 10 mm Loading capacity of 100 kg / m² including table top with even load
distribution Powder-coated steel in aluminium look Left and right leg packed as pair
Order no. PU
9 133 011 1 pair
590-
790
167,5
72,5
580
216
384480
110
T linking leg with height-adjustment capability
For use on left / right Height adjustment from 590 - 790 mm in engaged stages of 10 mm Loading capacity of 100 kg / m² including table top with even load
distribution Powder-coated steel in aluminium look
Order no. PU
9 133 012 1 ea.
72,5
700130
480384
590-
790
101,5
110
C base with height-adjustment capability
Height adjustment from 590 - 790 mm in engaged stages of 10 mm Loading capacity of 100 kg / m² including table top with even load
distribution Powder-coated steel in aluminium look Left and right leg packed as pair
Order no. PU
9 133 014 1 pair
72,5
580130
480384
590-
790
101,5
110
C linking leg with height-adjustment capability
Height adjustment from 590 - 790 mm in engaged stages of 10 mm Loading capacity of 100 kg / m² including table top with even load
distribution Powder-coated steel in aluminium look
Article Order no. PU
Left leg 9 133 015 1 ea.
Right leg 9 133 016 1 ea.
Desk support frame Change BasicBasic and linking legs
2016 www.hettich.com
HettCAD
L
103
Change Basic cross member
Can be mounted and adjusted without tools Screw connections are not required Powder-coated steel in aluminium look
Length mm For table width, mm
Order no. PU
660 - 1060 800 - 1200 9 133 017 1 ea.
1060 - 1860 1200 - 2000 9 133 018 1 ea.
L
103
Change Basic cross-member for add-on connection
For add-on connection of angled solutions Can be mounted and adjusted without tools Screw connections are not required Powder-coated steel in aluminium look
Length mm For table width, mm
Order no. PU
600 - 1060 800 - 1200 9 133 019 1 ea.
1060 - 1860 1200 - 2000 9 133 020 1 ea.
200
69580
65172
12830
Delhi round column
For 90° angled tables and conference tables Can be combined with Change cross-member, see above Compensation for uneven floors + 15 mm Powder-coated steel in aluminium look
Order no. PU
9 133 022 1 ea.
590-
790
72,5
167,5
384480
Delhi supporting leg with height adjustment capability
For 90° angled tables and conference tables Toolless height adjustment from 590 - 790 mm in engaged stages of
10 mm Can be combined with Change cross-member, see above Powder-coated steel in aluminium look
Order no. PU
9 133 023 1 ea.
Desk support frame Change BasicCross members / round column
2017Technik für Möbel
65
2
40
12,5
12,5 6590
6
6
ø 6
Connecting plate for angled solutions
Powder-coated steel in aluminum look
Order no. PU
0 048 443 1/2 ea.
Desk support frame Change BasicConnecting plate
2018 www.hettich.com
This table frame comprises: 2 T-basic legs 1 cross member
Loading capacity of 100 kg / m² including table top with even load distribution
This table frame comprises: 2 C-basic legs 1 cross member
Loading capacity of 100 kg / m² including table top with even load distribution
Configuration example 1
800384
800 - 2000
660 - 1060 1060 - 1860
48160
48
160
32
65
46 x 8
800
800 - 2000
48
48
65
384
80
240
46 x 8
55
32
1060 - 1860660 - 1060
154 234
This table frame comprises: 2 C-basic legs + 1 C-linking leg 1 cross member + 1 connecting cross-member At least 4 connecting plates for angled solutions
Loading capacity of 100 kg / m² including table top with even load distribution
This table frame comprises: 2 C-basic legs + 1 Singapore round column 2 cross members At least 4 connecting plates for angled solutions
Loading capacity of 100 kg / m² including table top with even load distribution
Configuration example 2
1400-
2000
384
114
800
498800
66
215 220
660 - 10601060 - 1860
46 x 83265
1100 - 15001500 - 2300
1200-
2000
128
800
512800
80
48
326512846 x 880
154
55
Desk support frame Change BasicConfiguration examples
2019Technik für Möbel
This table frame comprises: 4 Singapore round columns 4 cross members
Loading capacity of 100 kg / m² including table top with even load distribution
This table frame comprises: 4 T-basic legs 1 cross member + 2 connecting cross-members At least 8 connecting plates for angled solutions
Loading capacity of 100 kg / m² including table top with even load distribution
Configuration example 3
660 - 10601060 - 1860
1060-
1860
660-
1060
Toolless assembly
Desk support frame Change BasicConfiguration examples
2020 www.hettich.com
HettCAD
Basic frame
For 800 - 2000 mm desk widths in 200 mm increments Height adjustment + 15 mm by means of adjusting screw High stability Quick and simple assembly Total load including table top equals 100 kg per table top with
uniform load distribution. Powder-coated steel in aluminium look
348288
715
729
Order no. PU
9 078 727 2 ea.
L
84
62
Cross member
Powder-coated steel in aluminium look
Length mm For table width, mm
Order no. PU
703 800 0 045 993 1 ea.
903 1000 0 045 934 1 ea.
1103 1200 0 045 935 1 ea.
L
250350
84
62
Cross-member with possibility of attaching a second cross-member / 90° angle solution
Powder-coated steel in aluminium look
Length mm For table width, mm
Order no. PU
1303 1400 0 045 936 1 ea.
1503 1600 0 045 937 1 ea.
1703 1800 0 045 938 1 ea.
1903 2000 0 045 939 1 ea.
Desk support frame Change ArtaBasic frame / Cross members
2021Technik für Möbel
65
2
40
12,5
12,5 6590
6
6
ø 6
Connecting plate for angled solutions
Powder-coated steel in aluminium look
Order no. PU
0 048 443 1/2 ea.
This table frame comprises: 2 basic frames1 cross-member, any length
Total load including table top equals 100 kg per table top with uniform load distribution.
This table frame comprises: 3 basic frames + 1 cross-member, any length1 cross-member with possibility of attaching a second cross-member At least 4 connecting plates for angled solutions
Total load including table top equals 100 kg per table top with uniform load distribution.
Configuration examples
Desk support frame Change ArtaConnecting plate, configuration examples
2022 www.hettich.com
HettCAD
270
40
715
60
790
3 ( + 5)
2-leg frame, square
For use on left / right Compensation for uneven floors + 5 mm via adjusting screw Total load including table top equals 100 kg per table top with
uniform load distribution. Including fixing material Powder-coated steel in aluminium look
Order no. PU
9 133 024 2 ea.
270
40
680-
820
60
790
3 ( + 5)
2-leg frame, square
For use on left / right Infinite height adjustment 680 - 820 mm via grub screw Total load including table top equals 100 kg per table top with
uniform load distribution. Including fixing material Powder-coated steel in aluminium look
Order no. PU
9 133 025 2 ea.
715ø 40
270 255780
255
2-leg frame, round
For use on left / right With + 15 mm floor levelling via adjusting screw Total load including table top equals 100 kg per table top with
uniform load distribution. Including fixing material Powder-coated steel in aluminium look
Order no. PU
0 045 976 2 ea.
757
715
ø 40
270 9191
2-leg frame, rounded
For use on left / right With + 15 mm floor levelling via adjusting screw Total load including table top equals 100 kg per table top with
uniform load distribution. Including fixing material Powder-coated steel in aluminium look
Order no. PU
0 045 988 2 ea.
Desk support frame Change 2-legFrames
2023Technik für Möbel
HettCAD
2-leg infinite height adjustment 745 - 865 mm
For 2-leg frame, round, and 2-leg frame, round and curved, see above Assembly: Remove the leg adjustment screw with plastic mount from
the frame and fit height adjuster Black plastic / aluminium look
Set comprises: 2 cover sleeves 2 height adjusters
Order no. PU
0 045 978 1 set
L
40
20
50 50
20
Cross member
Powder-coated steel in aluminium look
Length mm For table width, mm
Order no. PU
710 800 0 046 009 2 ea.
910 1000 0 046 011 2 ea.
1110 1200 0 046 012 2 ea.
1310 1400 0 046 013 2 ea.
L
40
20
50 50
20
Cross member for 90° angle solution
Powder-coated steel in aluminium look
Length mm For table width, mm
Order no. PU
1510 1600 0 046 014 2 ea.
1710 1800 0 046 015 2 ea.
1910 2000 0 046 016 2 ea.
40 2020
50 50
Cross member, width adjustable
Width adjustable in engaged stages of 50 mm Powder-coated steel in aluminium look
For table width, mm Order no. PU
900 - 1400 0 046 019 2 ea.
1500 - 2000 0 046 021 2 ea.
Desk support frame Change 2-legHeight adjustment, cross members
2024 www.hettich.com
HettCAD
40
70
Desktop connector
For connecting two desks without a fourth support frame 70 x 40 mm (length x width) Powder-coated steel in aluminium look
Order no. PU
0 046 031 1/2 ea.
Total load including table top equals 100 kg per table top with uniform load distribution.
Configuration example, assembly
800
800
1500 - 2000 900 - 1400
600 - 1100
1200 - 1700
900 - 1400
1500 - 2000
Desk support frame Change 2-legDesktop connector, configuration example, assembly
2025Technik für Möbel
HettCAD
Formal 2-leg frame
For tables with “floating“ tabletop With + 20 mm floor levelling via adjusting screw Total load including table top equals 100 kg per table top with
uniform load distribution. Aluminium powder-coated in aluminium look
455
5013 (+ 20)
715 / 920
790
Height mm Order no. PU
715 9 133 026 1 ea.
920 9 133 028 1 ea.
Formal 2-leg frame
For tables with “floating“ tabletop With + 20 mm floor levelling via adjusting screw Total load including table top equals 100 kg per table top with
uniform load distribution. Table leg: aluminium, silver anodised Head piece: powder-coated grey aluminium
455
5013 (+ 20)
715 / 920
790
Height mm Order no. PU
715 9 133 027 1 ea.
920 9 133 029 1 ea.
92013201720
40
16
Cross member
Can be cut to the required length Aluminium, silver anodised
Length mm For table width, mm
Order no. PU
920 1200 9 133 033 2 ea.
1320 1600 9 133 034 2 ea.
1720 2000 9 133 035 2 ea.
Desk support frame Change Formal2-leg frames, cross member
2026 www.hettich.com
1630
40
90° connector
For 90° angle solutions Die-cast zinc, aluminium look
Order no. PU
9 133 030 1 ea.
60
40
20
120° connector
For 120° angle solutions Die-cast zinc, aluminium look
Order no. PU
9 133 031 2 ea.
40
60 20
Desktop connector
For connecting two desks without a fourth support frame Die-cast zinc, aluminium look
Order no. PU
9 133 032 2 ea.
50
13 (+ 20)
715 / 920
105
105
105
52 53
52
53
Supporting leg
For 120° angled tables and conference tables With + 20 mm floor levelling via adjusting screw Aluminium
Length mm Order no. / Finish PU
Powder coated Aluminium look
Silver anodised
715 9 133 695 9 133 696 1 ea.
920 9 133 697 9 133 698 1 ea.
Desk support frame Change FormalAccessories
2027Technik für Möbel
Total load including table top equals 100 kg per table top with uniform load distribution.
Configuration example, assembly
Desk support frame Change FormalConfiguration example, assembly
2028 www.hettich.com
+ +
3 mounting crosses
� 600 x 600 mm� 800 x 800 mm� 1000 x 1000 mm
3 columns
� steel column, cylindrical or� wooden column, cylindrical or� wooden column, conical
3 base plates
� diameter 620 mm� diameter 720 mm� diameter 820 mm
Can be individually combined from:
Desk support frame Change PlusSummary of configurations
2029Technik für Möbel
HettCAD
Base plate, ø 620 mm
Powder-coated steel in aluminium look
Order no. PU
0 048 676 1 ea.
31
ø 620ø 11
Mounting cross 600 x 600 mm
Powder-coated steel in aluminium look
Order no. PU
0 048 535 1 ea.
535
30600
18 18
129
60
ø 7
60
Steel column, cylindrical
Diameter 120 mm Tabletop dimensions, max. ø 700 or 600 x 600 mm (depth x width) Powder-coated steel in aluminium look
Order no. PU
0 045 836 1 ea.
ø 12050
654
Wooden column, cylindrical
Diameter 305 mm Tabletop dimensions, max. ø 900 or 800 x 800 mm (depth x width) Untreated beech
Order no. PU
0 045 837 1 ea.
ø 305 60
689
30
Wooden column, conical
Diameter 390 mm Tabletop dimensions, max. ø 900 or 800 x 800 mm (depth x width) Untreated beech
Order no. PU
0 045 838 1 ea.693
30
60ø 390
ø 190
686
Desk support frame Change PlusBase plate, ø 620 mmHeight 715 mm
2030 www.hettich.com
HettCAD
Base plate, ø 720 mm
Powder-coated steel in aluminium look
Order no. PU
0 048 534 1 ea.
47,5
ø 720ø 11
Mounting cross 800 x 800 mm
Powder-coated steel in aluminium look
Order no. PU
0 048 533 1 ea.
18 18
129
60
735
800
ø 7
30
Steel column, cylindrical
Diameter 120 mm Tabletop dimensions, max. ø 1100 or 850 x 850 mm (depth x width) Powder-coated steel in aluminium look
Order no. PU
0 045 823 1 ea.
ø 12050
634
Wooden column, cylindrical
Diameter 335 mm Tabletop dimensions, max. ø 1300 or 1050 x 1050 mm (depth x width) Untreated beech
Order no. PU
0 045 824 1 ea.
ø 335 60
679
30
Wooden column, conical
Diameter 390 mm Tabletop dimensions, max. ø 1300 or 1050 x 1050 mm (depth x width) Untreated beech
Order no. PU
0 045 825 1 ea.685
30
60ø 390
ø 190
Desk support frame Change PlusBase plate, ø 720 mmHeight 715 mm
2031Technik für Möbel
HettCAD
Base plate, ø 820 mm
Powder-coated steel in aluminium look
Order no. PU
0 048 532 1 ea.
56
ø 820ø 11
Mounting cross 1000 x 1000 mm
Powder-coated steel in aluminium look
Order no. PU
0 048 531 1 ea.
30
18
129
60
ø 7
935
1000
18
Steel column, cylindrical
Diameter 120 mm Tabletop dimensions, max. ø 1400 or 1000 x 1000 mm (depth x width) Powder-coated steel in aluminium look
Order no. PU
0 045 827 1 ea.
ø 12050
629
Wooden column, cylindrical
Diameter 405 mm Tabletop dimensions, max. ø 1600 or 1200 x 1200 mm
(depth x width) Untreated beech
Order no. PU
0 045 828 1 ea.
ø 405 60
669
30
Wooden column, conical
Diameter 390 mm Tabletop dimensions, max. ø 1600 or 1200 x 1200 mm
(depth x width) Untreated beech
Order no. PU
0 045 829 1 ea.669
30
60ø 390
ø 190
Desk support frame Change PlusBase plate, ø 820 mmHeight 715 mm
2032 www.hettich.com
Change Top Basic and Pro
The following standards / normative documents were applied for testing: Machine Directive 2006 / 42 / EC, incomplete machines EMC Directive 2004 / 108 / EC EN 527 was also observed in relevant areas
Change Top Flex
All columns supplied by us meet with the statutory requirements to be taken into account when issuing a GS test certificate for ready-to-use parts.
The following standards were applied for the tests: EN 527-1 EN 527-2 EN 527-3 DIN Fb 147 DIN 16550-1 EN 60950-1 EN ISO 13849-1 BGI 650
Load capacity with uniform loading of the table
Change Top Eco 100 kg Change Top Manual 100 kg Change Top round column 8 - 12 kg Change Basic 100 kg / m² Change Arta 100 kg Change Formal 100 kg Change Plus 100 kg
Desk support framesTechnical Information
2033Technik für Möbel
2034 www.hettich.com
Table legs with the Hettich moun-ting plate are particularly suitable for mounting under prefabricated table tops with System 32 holes.
Designer-style furniture feet in cast aluminium.
Furniture feet in aluminium, plastic or steel.
Modern table design is optimally rounded off by the large range of table legs in various shapes, materials, finishes and sizes.
Table legs and furniture feet
2035Technik für Möbel
Designer table legs 2036 - 2039
System 32 table legs 2040 - 2048
Standard table legs 2049 - 2054
Accessories, standard table legs Adjusting screw to compensate uneven floors, cable grip Front panel connector 2055 - 2057
Furniture feet 2058 - 2061
Technical Information 2062 - 2063 Finishes 2063
Table legs and furniture feetSummary
2036 www.hettich.com
HettCAD
Abena
Square tubing, 100 x 100 mm With compensation for uneven floors + 15 mm / - 5 mm Can also be used with glass tables, see below for glass table adapters Loading capacity 250 kg per table leg The quality of the table top must match this load range Concealed mounting directly under the corner of the table Aluminium, brushed stainless-steel look
Length mm Order no. PU
695 9 078 983 1 ea.
720 9 078 397 1 ea.
820 9 078 399 1 ea.
870 9 078 411 1 ea.
1100 9 078 417 1 ea.
Glass table adapter for Abena
For square tubing 100 x 100 mm Steel
Order no. PU
9 078 981 1 ea.
Mounting
+ 15 /- 5
100 100
70 70
Designer table legAbenaMounted directly under the corner of the table
2037Technik für Möbel
HettCAD
Abeni
Square tubing, 100 x 100 mm With compensation for uneven floors + 15 mm / - 5 mm Variable mounting plate for two mounting versions Loading capacity 250 kg per table leg The quality of the table top must match this load range Aluminium, brushed stainless-steel look
Length mm Order no. PU
695 9 078 957 1 ea.
720 9 078 962 1 ea.
820 9 078 966 1 ea.
870 9 078 969 1 ea.
1100 9 078 979 1 ea.
Mounting
+ 25
165
100100
165
135135
5
25
5
Designer table legAbeni
2038 www.hettich.com
HettCAD
Afia, Afio, Afiu
Length 700 mm Square tubing, 60 x 60 mm Loading capacity 100 kg per table leg With + 10 mm floor levelling Brushed stainless steel
Set comprises: 4 table legs Fixing material
Article Order no. PU
Afia - mounted slightly to the inside 9 078 541 1 set
Afio - directly under the corner of the table 9 078 475 1 set
Afiu - in front of the table corner 9 078 497 1 set
Afia
Mounted slightly to the inside
700
60
115
32
32
32
Afio
Mounted directly under the corner of the table
700
60
3965
95150 127
Afiu
Mounted in front of the table corner
700
60
150
32
32
32
Designer table legAfia, Afio, AfiuIn stainless steel
2039Technik für Möbel
HettCAD
Chidi
Diameter 100 mm Height adjustment + 25 mm Loading capacity 250 kg per table leg The quality of the table top must match this load range Finishes, see page 2063 Steel
Length mm Order no. / Finish PU
Stainless-steel look
High-gloss chrome-plated
720 9 078 445 9 078 433 1 ea.
870 9 078 464 9 078 458 1 ea.
1100 9 078 429 9 078 423 1 ea.
Mounting
+ 25
73,3
ø 168
ø 100
ø 5,5
120°
Designer table legChidiIn steel
2040 www.hettich.com
HettCAD
Efua
Length 710 mm Height adjustment + 30 mm, infinitely adjustable up to a length of
740 mm Loading capacity 150 kg per table leg Finishes, see page 2063 Steel
Set comprises: 4 table legs Fixing material
Finish Order no. / Diameter mm PU
50 60 80
High-gloss chrome-plated 0 070 131 0 070 134 0 070 143 1 set
Stainless-steel look 0 070 132 0 070 135 0 070 144 1 set
Matt black 0 070 133 0 070 136 0 070 145 1 set
Polished black - 0 070 137 - 1 set
Grey - 0 070 138 - 1 set
White - 0 070 139 - 1 set
Aluminium look - 0 070 140 - 1 set
Brass-plated - 0 070 141 - 1 set
Stainless steel sanded - 0 070 142 - 1 set
INTERN
ATION
INTERNATION
32 32 32 32 32 32 32 32 32 32
32
32
32
32
32
INTERNATION
System 32 table legEfuaIn steel
2041Technik für Möbel
HettCAD
Efui
Length 710 mm Diameter 60 mm Height adjustment + 30 mm, infinitely adjustable up to a length of
740 mm Loading capacity 150 kg per table leg Aluminium anodised
Set comprises: 4 table legs Fixing material
Order no. PU
0 070 146 1 set
INTERN
ATION
INTERNATION
32 32 32 32 32 32 32 32 32 32
32
32
32
32
32
INTERNATION
System 32 table legEfuiIn aluminium
2042 www.hettich.com
HettCAD
Femi
Length 650 / 710 mm Diameter 60 mm Height adjustment + 100 mm, infinitely height-adjustable
up to 750 / 810 mm Loading capacity 150 kg per table leg Can be used with cover sleeves for height adjustment, see page 2043 Can be used with Femica castors, see page 2044 Finishes, see page 2063
Set comprises: 4 table legs Fixing material
Finish Order no. / Length mm PU
650 710
High-gloss chrome-plated 0 070 202 0 070 147 1 set
Stainless-steel look 0 070 206 0 070 148 1 set
Matt black 0 070 207 0 070 149 1 set
Femi as complete set Length 650 mm (including castor) Diameter 60 mm Height adjustment + 100 mm, infinitely height-adjustable
up to 750 mm Loading capacity 100 kg per table leg Finishes, see page 2063
Set comprises: 1 table leg 1 cover sleeve for height adjustment 1 castor, can be pivoted and locked Fixing material
Finish Order no. PU
High-gloss chrome-plated 0 070 208 1 set
Stainless-steel look 0 070 211 1 set
Matt black 0 070 212 1 set
System 32 table legFemiIn steel, with large adjustment range
2043Technik für Möbel
HettCAD
Femico cover sleeve for Femi
Conceal the black plastic screw for adjusting the height and give the foot a “closed” continuous look
Finishes, see page 2063 Steel
Set comprises: 4 cover sleeves 4 base rings, black plastic
Finish Order no. PU
High-gloss chrome-plated 0 070 198 1 set
Stainless-steel look 0 070 199 1 set
Matt black 0 070 200 1 set
1. 2. 3.
Dismountpre-mountedbase ring Mount
base ring
System 32 table legFemicoFor System 32 Femi table leg
2044 www.hettich.com
HettCAD
Femica castor for Femi
Clip-on type Height 70 mm (in addition to the table leg length) Can be pivoted and locked Can be used with or without steel cover sleeve Black plastic
Order no. PU
0 070 201 1 ea.
70
100
100
100
Steel table legwith mountedcover sleeve
Dismountpre-mountedbase ring
Mountbase ring
Steel table leg
System 32 table legFemicaFor System 32 Femi table leg
2045Technik für Möbel
HettCAD
Ayo
Length 1200 mm Diameter 60 mm Height adjustment + 30 mm, infinitely adjustable up to a length of
1230 mm Can be individually cut to length at the end Loading capacity 150 kg per table leg The quality of the table top must match this load range Finishes, see page 2063 Steel
Set comprises: 1 table leg 1 foot element 1 black plastic cover sleeve Fixing material
Finish Order no. PU
High-gloss chrome-plated 0 046 048 1 set
Stainless-steel look 0 046 049 1 set
Matt black 0 046 051 1 setINTERN
ATION
INTERNATION
32 32 32 32 32 32 32 32 32 32
32
32
32
32
32
INTERNATION
System 32 table legAyoFor stand-at tables and high loads
2046 www.hettich.com
HettCAD
Jelani
Length 690 mm Diameter 80 mm Height adjustment + 180 mm, infinitely adjustable up to a length of
870 mm Loading capacity 150 kg per table leg The quality of the table top must match this load range Finishes, see page 2063 Steel
Set comprises: 1 table leg 1 cover sleeve Fixing material
Finish Order no. PU
High-gloss chrome-plated 0 046 063 1 set
Stainless-steel look 0 046 064 1 set
Matt black 0 046 065 1 setINTERN
ATION
INTERNATION
32 32 32 32 32 32 32 32 32 32
32
32
32
32
32
INTERNATION
System 32 table legJelaniFor stand-at tables and high loads
2047Technik für Möbel
HettCAD
Esia
Curved table leg with conical foot Length 710 mm Diameter 50 mm Height adjustment + 20 mm, infinitely adjustable up to a length of
730 mm Loading capacity 150 kg per table leg Steel, aluminium look Finishes, see page 2063
Set comprises: 1 table leg Fixing material
INTERN
ATION
INTERNATION
32 32 32 32 32 32 32 32 32 32
32
32
32
32
32
INTERNATION
710
ø 50
730
ø 50
100
20
Order no. PU
0 046 058 1 set
System 32 table legEsiaCurved shape
2048 www.hettich.com
HettCAD
Esib
Curved table leg Length 680 mm Diameter 50 mm Height adjustment + 100 mm, infinitely adjustable up to a length of
780 mm Loading capacity 150 kg per table leg Steel, aluminium look Finishes, see page 2063
Set comprises: 1 table leg Fixing material
INTERN
ATION
INTERNATION
32 32 32 32 32 32 32 32 32 32
32
32
32
32
32
INTERNATION
100
780
ø 50
680
ø 50
100
Order no. PU
0 046 057 1 set
System 32 table legEsibCurved shape
2049Technik für Möbel
HettCAD
Jengo
Length 710 mm Diameter 50 mm Height adjustment + 30 mm, infinitely adjustable up to a length of
740 mm Loading capacity 150 kg per table leg The quality of the table top must match this load range Finishes, see page 2063 Steel
Set comprises: 4 table legs Fixing material
Finish Order no. PU
High-gloss chrome-plated 0 046 694 1 set
Stainless-steel look 9 078 548 1 set
Matt black 0 046 693 1 set
710
30
710
Standard table legJengoFoldable steel table leg
2050 www.hettich.com
HettCAD
Jengo
Length 710 mm Diameter 50 mm Height adjustment + 30 mm, infinitely adjustable up to a length of
740 mm Loading capacity 150 kg per table leg The quality of the table top must match this load range Aluminium ribbed design
Set comprises: 4 table legs Fixing material
Order no. PU
0 046 066 1 set
710
30
710
Standard table legJengoFoldable aluminium table leg
2051Technik für Möbel
HettCAD
Ife
Length 730 mm Diameter 50 mm Detachable mounting plate Loading capacity 150 kg per table leg The quality of the table top must match this load range Clear-lacquered beech Adjusting screw to compensate uneven floors, see page 2055
118
120
151
44
38
92
46
730 Order no. PU
0 022 107 1 ea.
Standard table legIfeWood
2052 www.hettich.com
HettCAD
Kofi
Diameter 60 mm Infinitely height-adjustable by + 20 mm Detachable mounting plate Loading capacity 100 kg per table leg The quality of the table top must match this load range Finishes, see page 2063
Finish Order no. / Length mm PU
400 700 900
White 0 001 220 0 001 182 0 016 851 1 ea.
Polished chrome-plated 0 001 224 0 001 183 0 016 854 1 ea.
Polished black 0 001 221 0 001 184 0 016 852 1 ea.
Stainless-steel look 0 016 846 0 016 847 0 046 283 1 ea.
Aluminium look 0 001 814 0 001 819 0 016 853 1 ea.
20
400 / 700 / 900
118
120151
44
38
92
46
Standard table legKofiIn steel
2053Technik für Möbel
HettCAD
Chipo RO
Diameter 30 mm Fixed mounting plate Loading capacity 50 kg per table leg The quality of the table top must match this load range Suitable furniture feet, see page 2061 Finishes, see page 2063 Adjusting screw to compensate uneven floors and base,
see page 2055
Length mm Order no. / Finish PU
Aluminium look Polished black White
300 0 045 777 0 045 774 0 045 775 1 ea.
400 0 016 872 0 001 226 0 001 139 1 ea.
500 0 046 273 0 046 276 0 046 279 1 ea.
600 0 046 274 0 046 277 0 046 281 1 ea.
700 0 016 876 0 001 227 0 001 140 1 ea.
800 0 016 861 0 001 228 0 001 145 1 ea.
900 0 046 275 0 046 278 0 046 282 1 ea.
ø 30
100 - 900
6060
4545
Standard table legChipo ROIn steel
2054 www.hettich.com
HettCAD
Chipo SQ
Square tubing, 24 x 24 mm Fixed mounting plate Loading capacity 50 kg per table leg The quality of the table top must match this load range Suitable furniture feet, see page 2061 Finishes, see page 2063 Adjusting screw to compensate uneven floors, see page 2055
Length mm Order no. / Finish PU
Aluminium look Polished black White
300 0 045 810 0 001 350 0 001 162 1 ea.
400 0 016 873 0 001 351 0 001 148 1 ea.
500 0 046 264 0 001 352 0 001 163 1 ea.
600 0 046 265 0 001 381 0 001 164 1 ea.
700 0 016 864 0 001 382 0 001 149 1 ea.
800 0 016 860 0 001 383 0 001 150 1 ea.
900 0 046 266 0 001 384 0 001 169 1 ea.
6060
45
100 - 900
24 24
45
Standard table legChipo SQIn steel
2055Technik für Möbel
Adjusting screw with M10 thread to compensate uneven floors
Article Order no. PU
Adjusting screw with M10 thread to compensate uneven floors, 2 ea. 0 001 186 1 ea.
Base, inside diameter 30 mm, transparent, 4 ea. 0 002 130 1 ea.
6025 32
Cable grip
Screw-on cable grip for up to 4 cables Black plastic
Order no. PU
0 046 053 1 ea.
Table legsAccessories
2056 www.hettich.com
HettCAD
32
Front panel connector
For different panel versions Can be freely positioned, freely pivoted Diameter 60 mm Black plastic
For table version Set comprises: Order no. PU
With 1 modesty panel
4 clips 4 adapters
0 070 216 1 set
With 2 modesty panels
6 clips 8 adapters
0 070 217 1 set
With 3 modesty panels
8 clips 12 adapters
0 070 218 1 set
Table with one modesty panel / two modesty panels
Table with three modesty panels / two table tops mounted side by side
Table legsAccessories
2057Technik für Möbel
2058 www.hettich.com
HettCAD
H
133
63
ø 6
18
96
Mele
Including plastic glide Loading capacity 150 kg per furniture leg Cast aluminium
Dimension H mm Order no. / Finish PU
Polished Satin-finish
100 9 078 578 9 078 577 1 ea.
120 9 078 580 9 078 579 1 ea.
150 9 078 582 9 078 581 1 ea.
H
69
69
6920
ø 6
Kapena
Including plastic glide Loading capacity 200 kg per furniture leg Cast aluminium
Dimension H mm Order no. / Finish PU
Polished Satin-finish
100 9 078 419 9 078 416 1 ea.
120 9 078 425 9 078 421 1 ea.
150 9 078 437 9 078 431 1 ea.
Furniture legMele, KapenaIn cast aluminium
2059Technik für Möbel
HettCAD
H
100
ø 5
43
60135
60
Kalea RO
Diameter 38 mm With + 7 mm floor levelling Including plastic glide Loading capacity 60 kg per furniture leg Brushed stainless steel
Dimension H mm Order no. PU
110 9 078 432 1 ea.
150 9 078 427 1 ea.
190 9 078 426 1 ea.
10043
60135
H
ø 5
60
Kalea SQ
Square tubing, 35 x 35 mm With + 7 mm floor levelling Including plastic glide Loading capacity 60 kg per furniture leg Brushed stainless steel
Dimension H mm Order no. PU
110 9 078 456 1 ea.
150 9 078 440 1 ea.
190 9 078 436 1 ea.
Furniture legKalea RO, Kalea SQIn brushed stainless steel
2060 www.hettich.com
HettCAD
60
ø 40
454560
H
ø 40
10
Lano RO
Diameter 40 mm With + 10 mm floor levelling via adjusting screw Loading capacity 150 kg per furniture leg Mounting plate: steel, powder-coated, silver Furniture leg: aluminium Including plastic threaded glide
Dimension H mm Order no. / Finish PU
Polished Silver anodised
80 9 119 555 9 119 551 1/4 ea.
100 9 119 556 9 119 552 1/4 ea.
120 9 119 557 9 119 553 1/4 ea.
150 9 119 558 9 119 554 1/4 ea.
30
10
4560
45
H
30 30
60
Lano SQ 30
Square tubing, 30 x 30 mm With + 10 mm floor levelling via adjusting screw Loading capacity 150 kg per furniture leg Mounting plate: steel, powder-coated, silver Furniture leg: aluminium Including plastic threaded glide
Dimension H mm Order no. / Finish PU
Polished Silver anodised
80 9 119 449 9 119 445 1/4 ea.
100 9 119 450 9 119 446 1/4 ea.
120 9 119 541 9 119 447 1/4 ea.
150 9 119 542 9 119 448 1/4 ea.
3333
80
H
46
3333
80
46
46
15
Lano SQ 46 Square tubing, 46 x 46 mm With + 15 mm floor levelling via adjusting screw Loading capacity 150 kg per furniture leg Mounting plate: steel, powder-coated, silver Furniture leg: aluminium Including plastic threaded glide
Dimension H mm Order no. / Finish PU
Polished Silver anodised
100 9 119 547 9 119 543 1/4 ea.
120 9 119 548 9 119 544 1/4 ea.
150 9 119 549 9 119 545 1/4 ea.
200 9 119 550 9 119 546 1/4 ea.
Furniture legLano RO, Lano SQ 30, Lano SQ 46In aluminium
2061Technik für Möbel
HettCAD
H ø 30
6060
45
Chipo RO Diameter 30 mm Fixed mounting plate Loading capacity 50 kg per furniture leg Finishes, see page 2063 Suitable table legs, see page 2053 steel
Dimension H mmOrder no. / Finish
PUAluminium look Black White
100 0 016 862 0 016 875 0 016 874 1 ea.
200 0 045 773 0 045 770 0 045 771 1 ea.
250 0 046 272 0 001 225 0 001 138 1 ea.
6060
45
H
24 24
Chipo SQ Square tubing, 24 x 24 mm Fixed mounting plate Loading capacity 50 kg per furniture leg Finishes, see page 2063 Suitable table legs, see page 2054 steel
Dimension H mmOrder no. / Finish
PUAluminium look Black White
100 0 016 863 0 001 376 0 001 160 1 ea.
200 0 045 808 0 001 378 0 001 161 1 ea.
250 0 045 809 0 001 379 0 001 147 1 ea.
Furniture legChipo RO, Chipo SQIn steel
2062 www.hettich.com
Heights / lengths
Table legs
� The length depends above all on ergonomic use� Length + thickness of the table top = height of table� Table legs and applications: Length >800 mm = standing tables Length 690 to 750 mm = seated tables Length around 400 mm = living room tables
Furniture feet
� Length 20 to 250 mm
Mounting
80
3333
46
3333
80
H
46
Table legs
� Mounting plates for designer table legs are often adapted to the design for aesthetic reasons� Other table legs take account of practical aspects for mounting and dismantling, e.g. for storage
Furniture feet
� Here too, the furniture feet take account of the overall appearance� Some furniture feet with larger mounting plate are particularly suitable for mounting under the side and base, thus ensuring that the load is optimally supported
Hettich mounting plates
32
32 32 32 32 32
32
32
32
32
32
32 32 32 32 32
INTERNATINAL
32
32
32
32
LANITANRETNI
32
32 32 32 32 32
32
32
32
32
32
32 32 32 32 32
32
32
32
32
INTERNATINAL
32 32 32 32 32 32 32 32 32 32
32
32
32
32
32
32 32 32 32 32 32 32 32 32 32
32
32
32
32
32
� Table legs with this mounting plate are particularly suitable for mounting under prefabricated table tops with System 32 holes
Table legs and furniture feetTechnical Information
2063Technik für Möbel
High-gloss chrome-plated
Stainless-steel look Matt black
Polished black Grey White
Aluminium look Brass-plated Stainless steel, ground
Table legs and furniture feetTechnical InformationFinishes, table legs and furniture feet
2064 www.hettich.com
Frontslide Basic Lift is the practical solution for extending an undivi-ded table top at both ends. With integrated lifting function.
Universal 55 is a made-to-measure fitting system for cutting to any length on site. Ideal for variable table concepts.
The Classic fitting is particularly strong. Rounded cutting edges and precision profile geometry ensure convenient handling.
Alu 77 combines functionality and stability in one component. Its benefits: virtually silent running action, classy design and elegantly concealed functions.
Furniture that spontaneously adjusts to needs. A compact table that extends for dining in style. Multifunctional tech-nology that doesn‘t spoil the design but provides the key to
making it possible. These are the table extension slides from Hettich. In a host of practical versions. For tables that cut a fine figure in any situation.
Table extension slides
2065Technik für Möbel
Table extension slides Trimanis for divided table top - fixed-position table legs Range summary / Technical comparison 2066
Table extension slides Trimanis for divided table top - table legs move with top Range summary / Technical comparison 2067
Table extension slides Trimanis for undivided table top - fixed-position table legs Range summary / Technical comparison 2066 - 2067
Table extension slides Trimanis for undivided table top - table legs move with top Range summary / Technical comparison / moving frame 2067 - 2068
Table extension slides Trimanis with folding mechanism Range summary / Technical comparison 2068
Table extension slides Trimanis with folding leaf fitting Range summary / Technical comparison 2069
Table extension slides Trimanis, accessories Range summary / Technical comparison 2069
Table extension slidesSummary
2066 www.hettich.com
Alum 77
Page
Description
Max. table length without extension leaf, mm
Installed length mm
Max. number of extension leaves
Operating principle
Max. table length with extension leaf, mm
2070 - 2071
Divided table top - fixed-position table legs
Table extension slide for tables with fixed lower frame
115 kg
Rope brake / synchronized control
Aluminium anodised
3 x 500 mm / 3 x 600 mm / 6 x 500 mm
980 / 1200 / 1800
2900 / 3600 / 5400
1400 / 1800 / 2400
Load class
Functions
Material
90 kg
Lifting function / rope brake
Frontslide Basic Lift
2072 - 2073
Table extension slide for tables with fixed lower frame and lif-ting function
1800
1700
2 x 500 mm
Undivided table top - fixed-position table legs
2800
Aluminium anodised
For installed length 600 mm = 60 kg 850 / 1350 mm = 90 kg
Rope brake / synchronous control, for optional use with folding leaf fitting
Basic Advanced
2074 - 2075
Table extension slide for frame profiles
800 / 1400 / 1800
600 / 850 / 1350
1 x 400 mm / 1 x 500 mm / 2 x 500 mm
Divided table top - fixed-position table legs
1200 / 1900 / 2800
Galvanised steel
Table extension slides TrimanisRange summary / Technical comparison
2067Technik für Möbel
90 kg
Without brake
Classic
2076 - 2077
Table extension slide for telescopic extension
1400 / 1800
1070 / 1400
2 x 500 mm
Divided table top - table legs moving with top
2400 / 2800
Galvanised steel
90 kg
For optional use with folding mechanism with stop function
Frontslide Basic Alu 55
2078 - 2079
Table extension slide with extension to one side
at least 1000
830
1 x 500 mm
Undivided table top - fixed-position table legs
at least 1500
Aluminium anodised
90 kg
Rope brake
Topslide
2080 - 2081
Table extension slide for frame profiles
800 / 1400 / 2000
600 / 1000 / 1500
1 x 350 mm / 1 x 600 mm / 1 x 1000 mm
Undivided table top - fixed-position table legs
1150 / 2000 / 3000
Galvanised steel
115 kg
For optional use with folding mechanism with stop function
Frontslide Alu 77
2082 - 2083
Table extension slide with extension to one side
1300 / 1800 / 2400
940 / 1315 / 1815
2 x 500 mm
Undivided table top - table legs move with top
1800 / 2800 / 3400
Aluminium anodised
Table extension slides TrimanisRange summary / Technical comparison
2068 www.hettich.com
Universal 55
Page
Description
Max. table length without extension leaf, mm
Installed length mm
Max. number of extension leaves
Operating principle
Max. table length with extension leaf, mm
2084 - 2085
Undivided table top - table legs move with top
Table extension slide with extension to one side
115 kg
Can be shortened to any length, for optional use with folding mechanism with stop function
Aluminium anodised
2 x 500 mm 1 x 1050 mm
2000
3000
2000
Load class
Functions
Material
115 kg
-
Classic with frame
2086 - 2087
Table extension slide with frame
800
800
-
Undivided table top - frame moves with top
1600
Galvanised steel slide Frame, stainless-steel look
-
For Frontslide Alu 55, Frontslide Alu 77, Universal 55
Folding mechanism
2088 - 2089
Folding mechanism with stop function for extension slides for tables extending to one side
-
-
1 x 600 mm / 2 x 500 mm / 2 x 600 mm
-
-
-
Table extension slides TrimanisRange summary / Technical comparison
2069Technik für Möbel
-
For Basic Advanced
Folding leaf fitting
2090 - 2091
Folding leaf mechanism
-
-
1 x 500 mm
-
-
-
-
-
Accessories
2092 - 2095
Corner bracket, retraction bar, dowels and bushes, locking hooks, glides, rollers
-
-
-
-
-
-
Table extension slides TrimanisRange summary / Technical comparison
2070 www.hettich.com
HettCAD
Alu 77
Table extension slide for table lengths from 1200 - 2400 mm to max. 5400 mm
With fixed lower frame With synchronised control (for simultaneously opening and closing
both table tops) Integrated rope brake Load class 115 kg A supporting leg is recommended for installed lengths of 1800 mm amd over Aluminium anodised
Set comprises: 1 pair of table extension slides 16 or 28 dowels / bushes depending on table length
Installed length mm For table length in mm Number of extension leaves Width extension leaves mm Order no. PU
980 1200 - 1400 3 500 9 133 044 1 set
1200 1400 - 1800 3 600 9 133 045 1 set
1800 2000 - 2400 6 500 9 133 046 1 set
Operating principle
Planning dimensions
1200 - 14001400 - 18002000 - 2400
980 / 1200 / 1800Installed length
1560 / 2030 / 3150
500 / 600
1200 - 1400 (+ 3 x 500)1400 - 1800 (+ 3 x 600)2000 - 2400 (+ 6 x 500)
500 / 600500 / 600
Opening dimension
AdviceAccessories, see pages 2092 - 2095
Table extension slide TrimanisDivided table top - fixed-position table legsAlu 77
2071Technik für Möbel
HettCAD
Cross-sectional drawing
Planning dimensions, installed length 980 mm
Planning dimensions, installed length 1200 mm
Planning dimensions, installed length 1800 mm
81
87
108
8450
70,1ø 5,1
33,3
6,7
92,4
60 400 60 400 60
980
20 100 100 100 100 70
5 x ø 5,1
9
A
10 10 10
10 10
1010
5 x ø 5,1
A
1200
60 510 60 510 60
20 100 100 100 100 100 80
6 x ø 5,1
9
A
10 10 10
10 10
1010
5 x ø 5,1
A
10 10 10
10 10
1010
5 x ø 5,1
A
1800
60 375 60 375 60 375375 60 60
10020 100 100 100 100 100 100 80100
9
9 x ø 5,1A
Table extension slide TrimanisDivided table top - fixed-position table legsAlu 77
2072 www.hettich.com
HettCAD
Frontslide Basic Lift
Table extension slide for extending an undivided table top at both ends with integrated lift function for table lengths from 1800 to a max. of 2800 mm
For table tops in a thickness of 25 mm Integrated rope brake Load class 90 kg Aluminium anodised
Set comprises: 1 pair of table extension slides
Installed length mm For table length in mm Number of extension leaves Width extension leaves mm Order no. PU
1700 1800 2 500 9 133 050 1 set
Operating principle
Planning dimensions
1800
794
500
500
Fixed table top 33
Extension leaf 25 (lift 28)
Table top 25
AdviceAccessories, see pages 2092 - 2095
Table extension slide TrimanisUndivided top - fixed-position table legsFrontslide Basic Lift
2073Technik für Möbel
HettCAD
Cross-sectional drawing
Planning dimensions, installed length 1700 mm
5680,5
ø 6,5
55,5 60,5
13,565,5
ø 5,1
44
13,1Oblong hole Lift 28 = 88.4
for panel thickness25 mm
1700
224 224112 112
315
20 ø 5,14 x ø 5,1
8
17,532,5
29,529,5
32,532
32,529,5
29,5
32,517,5 437,7
Table extension slide TrimanisUndivided top - fixed-position table legsFrontslide Basic Lift
2074 www.hettich.com
HettCAD
Basic Advanced
Table extension slide for table lengths from 800 mm to 1800 mm to max. 2800 mm
For frame profiles With synchronised control (for simultaneously opening and closing
both table tops) Integrated rope brake Load class: installed length 600 mm = 60 kg / installed length 850 /
1350 mm = 90 kg Can be combined with folding leaf fitting, see page 2090 - 2091 Outer profile: galvanised steel Inner profile: aluminium
Set comprises: 1 pair of table extension slides 8 or 12 dowels / bushes
Installed length mm For table length in mm Number of extension leaves Width extension leaves mm Order no. PU
600 800 1 400 9 133 036 1 set
850 1000 - 1400 1 500 9 079 740 1 set
1350 1500 - 1800 2 500 9 079 741 1 set
Operating principle
Planning dimensions
600 / 850 / 1350
800 / 1000 - 1400 / 1500 - 1800
Installed length
440 / 550 / 1050
800 ( + 1 x 400 )1000 - 1400 ( + 1 x 500 )1500 - 1800 ( + 2 x 500 )
500
500
Openingdimension
AdviceAccessories, see pages 2092 - 2095
Table extension slide TrimanisDivided table top - fixed-position table legsBasic Advanced
2075Technik für Möbel
HettCAD
Cross-sectional drawing
Planning dimensions, installed length 600 mm
Planning dimensions, installed length 850 mm
Planning dimensions, installed length 1350 mm
Height 40 mm / installed length 600 mm Height 50 mm / installed length 850 / 1350 mm
53,1
15
24,4
30
ø 5,1
37,740
11,4
28,4
53,4
18,6
28,1
38
4850
1,7
ø 5,1
28,6
8 32 32 8
12
5,5
3 x ø 5,1
80
600
112 112 49
1921
6 x ø 5,1
11 32 32 11
12
10
5 x ø 5,1
150
850
112 112 32
2426
12 x ø 5,1
12616
10
3232
11 32 32 11
12
10
5 x ø 5,1
150
1350
112 112 112
2426
20 x ø 5,1
8816
10
3232
11232 32 32
Table extension slide TrimanisDivided table top - fixed-position table legsBasic Advanced
2076 www.hettich.com
HettCAD
Classic
Table extension slide for table lengths from 1200 mm to 1800 mm to max. 2800 mm
For table extensions Table extension without brake Load class 90 kg Galvanised steel
Set comprises: 1 pair of table extension slides 12 wall plugs 6 tension jacks
Installed length mm For table length in mm Number of extension leaves Width extension leaves mm Order no. PU
1070 1200 - 1400 2 500 9 133 042 1 set
1400 1500 - 1800 2 500 9 133 043 1 set
Operating principle
Planning dimensions
1200 - 14001500 - 1800
1070 / 1400Installed length
1200 - 1400 (+ 2 x 500) 1500 - 1800 (+ 2 x 500)
2 x 500
Opening dimension= 1148 / 1060
AdviceAccessories, see pages 2092 - 2095
Table extension slide TrimanisDivided table top - table legs moving with topClassic
2077Technik für Möbel
HettCAD
Cross-sectional drawing
Planning dimensions, installed length 1070 mm
Planning dimensions, installed length 1400 mm
82
75 69,776,595
38
27,7
71
27,6
81,5
9 x ø 5,1
1120
5,5 2 x ø 4,5
1070
18530842 308 42
900
9 10
120 55 55 55 55 55 55 5520
510
185
9 x ø 5,1
1400
47342 42
1200
120 55 55 55 55 55 55 5520
510
473 185185
175
1120
5,5 2 x ø 4,5
Table extension slide TrimanisDivided table top - table legs moving with topClassic
2078 www.hettich.com
HettCAD
Alu 55 Frontslide Basic
Table extension slide for an extension leaf When using 1 extension leaf, 500 mm, table length at least 1000 mm When using 2 extension leaves, 500 mm each side: table length at
least 1900 mm (Important: please order 2 fittings)
With extension to one side With integrated retraction damping Load class 90 kg For optional use with folding mechanism with stop function,
see page 2088 - 2089 Aluminium anodised
Set comprises: 1 pair of table extension slides 4 dowels / bushes
Installed length mm For table length in mm Number of extension leaves Width extension leaves mm Order no. PU
830 1000 1 500 9 131 984 1 set
Operating principle
Planning dimensions
500
41,5
13,5
2 x ø 6,5
615
500
646Opening dimension
AdviceAccessories, see pages 2092 - 2095
Table extension slide TrimanisUndivided top - fixed-position table legsAlu 55 Frontslide Basic
2079Technik für Möbel
HettCAD
Cross-sectional drawing
Planning dimensions, installed length 830 mm
90
158
59
3620
2 x ø 4,2
456398 48
19,4
4 x ø 7
ø 11
ø 6,513,5 lowered
646
9
32
10
2
590 10
17,936
2 x ø 4,3
13,5
41,5 500
830
2 x ø 6,5
2 x ø 8
Table extension slide TrimanisUndivided top - fixed-position table legsAlu 55 Frontslide Basic
2080 www.hettich.com
HettCAD
Topslide
Table extension slide for an extension leaf for table lengths from 800 mm to 2000 mm to max. 3000 mm
For frame profiles Integrated rope brake Load class 90 kg Outer profile: galvanised steel Inner profile: aluminium
Set comprises: 1 pair of table extension slides 4 dowels / bushes
Installed length mm For table length in mm Number of extension leaves Width extension leaves mm Order no. PU
600 800 1 350 9 133 039 1 set
1000 1200 - 1400 1 600 9 133 040 1 set
1500 1600 - 2000 1 1000 9 133 041 1 set
Operating principle
Planning dimensions
8001200 - 14001600 - 2000
Installed length = 600 / 1000 / 1500 1.
2.
1 x 3501 x 6001 x 1000
Opening dimension =388 / 618 / 1024
AdviceAccessories, see pages 2092 - 2095
Table extension slide TrimanisUndivided top - fixed-position table legsTopslide
2081Technik für Möbel
HettCAD
Cross-sectional drawing
Planning dimensions, installed length 600 mm
Planning dimensions, installed length 1000 mm
Planning dimensions, installed length 1500 mm
38
5248
28,6
1,84
53,4
43 112 112 3333 112 112 43600
11 3232 3232 1115 15
180
43 112 112
32 32
112 57 112
32 32
112 112 43
1000
12 x ø 5,1
57
11 32
32
68 32
32
11
350
8 x ø 5,1
10
68
32 32
43 112 112
32 32
112 112
32
163 163
32
112 112
32 32
112 112 43
1500
11 32 32
32 32
16 x ø 5,1
86 86 32 32
32 32
11
450
10 x ø 5,1
10
Table extension slide TrimanisUndivided top - fixed-position table legsTopslide
2082 www.hettich.com
HettCAD
Frontslide Alu 77
Table extension slide for table lengths from 1100 - 2400 mm to max. 3400 mm
For tables with extension to one side For optional use with folding mechanism with stop function,
see page 2088 - 2089 Load class 115 kg Aluminium anodised
Set comprises: 1 pair of table extension slides 12 dowels / bushes
Installed length mm For table length in mm Number of extension leaves Width extension leaves mm Order no. PU
940 1100 - 1300 2 500 9 133 047 1 set
1315 1500 - 1800 2 500 9 133 048 1 set
1815 1900 - 2400 2 500 9 133 049 1 set
Operating principle
Planning dimensions
1100 - 13001500 - 18001900 - 2400
Installed length = 940 / 1315 / 1815
1100 - 1300 (+ 2 x 500) 1500 - 1800 (+ 2 x 500)1900 - 2400 (+ 2 x 500)
Opening dimension =1107 / 1150 / 1150
AdviceAccessories, see pages 2092 - 2095
Table extension slide TrimanisUndivided top - table legs move with topFrontslide Alu 77
2083Technik für Möbel
HettCAD
Cross-sectional drawing
Planning dimensions, installed length 940 mm
Planning dimensions, installed length 1315 mm
Planning dimensions, installed length 1815 mm
88
74
20,5
1,5
72,5
20,5
2,25
Outside Inside
35 160 256 19 445 25
940
25,22645 15,7
8 x ø 4,2
20 200 200 50 50 200 200 20
6 x ø 5,1
9
35 160 256 554
1315
25,226
8 x ø 4,2
45 15,7
20 200 200 200
37,5
200 200 200
37,5
20
8 x ø 5,1
9
35 160 256 456,5 882,5
1815
25,22645 15,72
8 x ø 4,2
20 200 200 200
87,5
200 200 200
87,5
20200
10 x ø 5,1
9
Table extension slide TrimanisUndivided top - table legs move with topFrontslide Alu 77
2084 www.hettich.com
HettCAD
Universal 55
Table extension slide for table lengths from 800 mm to 3000 mm For tables with extension to one side for customised sizes Can be shortened to customised table length For table widths from 700 to 1100 mm in 100 mm increments Extension leaves, 2 x 500 mm or 1 x 1050 mm max. Load class 115 kg For optional use with folding mechanism with stop function,
see page 2088 - 2089 Reinforcing bars for solid wood tops, see page 2092 Aluminium anodised
Set comprises: 1 pair of table extension slides 12 dowels / bushes 4 aluminium profiles, 2000 mm long 2 cross members 6 rollers with clamping adapter
Order no. PU
9 131 120 1 set
Operating principle
Max. planning dimensions
Installed length = 2000Opening dimension - 50 mm = Length of extension leaf
AdviceAccessories, see pages 2092 - 2095
Table extension slide TrimanisUndivided top - table legs move with topUniversal 55
2085Technik für Möbel
HettCAD
Cross-sectional drawing
Min. installed dimensions
Max. installed dimensions
Desktop width 950 mm =Clip 885 mm
Desktop width 1100 mm =Clip 1035 mm
Clip (2 x)(connection betweensystem and table leg)
335 465
465
AP = 800
AP = 800
IP = 800
IP = 800
Cross member
AP = External profileIP = Internal profile
Cross member
AP = 2000
IP = 2000
AP = 2000
IP = 2000
8491151
1151
Cross member
AP = External profileIP = Internal profile
Cross member
Table extension slide TrimanisUndivided top - table legs move with topUniversal 55
2086 www.hettich.com
HettCAD
Classic with frame
Table extension slide with frame Table top, folding, 180° Table top extends from 800 x 800 mm to 1600 x 800 mm Load class 115 kg Sewing-table hinge 130, see page 239 Frame: stainless-steel Table extension slide: galvanised steel
Set comprises: 2 support frames 1 pair of table extension slides
For table length in mm Order no. PU
800 9 131 202 1 set
Operating principle
Planning dimensions for a split table top
794 - 1595
800 - 1600
800
715
X
1.
2.
3.
AdviceAccessories, see pages 2092 - 2095
Table extension slide TrimanisUndivided top - table legs move with topClassic with frame
2087Technik für Möbel
HettCAD
Planning dimensions
Planning dimensions for a fixed table top
720
60
20142,5
674
794 - 1595
790
794 - 1595
800 - 1600
800
715
X
Table extension slide TrimanisUndivided top - table legs move with topClassic with frame
2088 www.hettich.com
Folding mechanism with stop function
Set comprises: Tube with brake lever handle Plastic tube clamps (for securing the panel) Support angle, see page 2095
For extension leaves For fitting Order no. PU
600 mm max. Frontslide Alu 55, Frontslide Alu 77, Universal 55 9 137 961 1 set
max. 2 x 400 mm or 1 x 800 mm Frontslide Alu 77, Universal 55 9 137 962 1 set
max. 2 x 500 mm or 1 x 1000 mm Frontslide Alu 77, Universal 55 9 137 963 1 set
max. 2 x 600 mm or 1 x 1200 mm Universal 55 9 137 964 1 set
Operating principle
Operating principle
Installed length = 940 / 1315 / 1815Support bracket for extension leaves
Table extension slide TrimanisFolding mechanism with stop functionFor table extension slides with extension to one side
2089Technik für Möbel
Fitting situation
Planning dimensions for 600 / 800 mm extension leaves
Planning dimensions for 1000 / 1200 mm extension leaves
Planning dimensions for striker
120
= =
63 38
27
5,3
680 / 1000
656 / 976
2 14ø 8
6 ø 5,37,3
23,6
16
5
14,392
30°
90°
ø 16
26,5
63 38
27
5,3
1200 / 1389
1176 / 1365
2 14ø 8
6 ø5,37,3
23,6
16
5
14,392
30°
90°
26,5
ø 16
40
18
16 21 42
78 40 78
7
2
Table extension slide TrimanisFolding mechanism with stop functionFor table extension slides with extension to one side
2090 www.hettich.com
Folding leaf fitting
Retractable, for extension leaves with a width of 500 mm For use in combination with table extension slides with closed frame
system or central leg Hinge, see page 195 Galvanised steel
Order no. PU
9 079 783 1 ea.
Planning dimensions
1. 2. 3.
505
≥ D + 25ø 3,5 x 15
50
3814
14
≥ D + 5
D
64
≥ 50
Operating principle
4. 5. 6.
Table extension slide TrimanisFolding leaf fittingFor table extension slides with closed frame system
2091Technik für Möbel
Folding leaf fitting
Retractable, for extension leaves with a width of 500 - 600 mm For use in combination with table extension slides with open frame
system Galvanised steel, yellow passivated
Order no. PU
9 079 707 1 set
Operating principle
1. 2. 3. 4. 5.
Table extension slide TrimanisFolding leaf fittingFor table extension slides with open frame system
2092 www.hettich.com
90°
14,5
10
40
32
126
81,3
7,82 54,5
Corner bracket, 40 mm
For connecting table leg and table frame profile Height 40 mm Depth 81.3 mm Galvanised steel
Order no. PU
9 141 818 1/50 ea.
90°
31,6
126,6
81,7
7,82 55,6
44
60
ø 14
Corner bracket, 60 mm
For connecting table leg and table frame profile Height 60 mm Depth 81.7 mm Galvanised steel
Order no. PU
9 141 819 1/70 ea.
90°
31,5
125,6
81
7,82 53,8
44
70
18
10
42
Corner bracket, 70 mm
For connecting table leg and table frame profile Height 70 mm Depth 81 mm Galvanised steel
Order no. PU
9 141 820 1/70 ea.
20
50
10
3
Reinforcing bar for solid wooden tops
Used to prevent thick, solid table tops from warping Slot-in type Galvanised steel
Length mm Order no. PU
400 9 137 970 2 ea.
500 9 137 971 2 ea.
700 9 141 821 2 ea.
800 9 137 972 2 ea.
900 9 137 973 2 ea.
Table extension slides TrimanisAccessories
2093Technik für Möbel
HettCAD
ø 8
1313
Dowels and bushes
For hole ø 8 x 13 mm Zinc, die-cast
Order no. PU
9 133 060 4 Set
17
52
11
10
1,5
7
7 ø 3,9
Locking hook
Galvanised steel
Order no. PU
9 133 058 2 ea.
ø 3,4
ø 3,9168
6,5
27
47
80
516
42
1,5
9
13 11
32,7
38
Tension jack
For connecting two table tops where no brake system is fitted Steel, nickel-plated
Order no. PU
9 133 059 2 ea.
4,5ø 36
23,8
Panel glide
With non-slip support surface Plastic, black / grey
Order no. PU
9 133 052 2 ea.
Table extension slides TrimanisAccessories
2094 www.hettich.com
HettCAD
4,5ø 36
23,8
Panel glide
With felt liner Plastic, black / grey
Order no. PU
9 133 053 2 ea.
ø 36
23,8
4,5
Panel roller
With hard surface for soft floors Black plastic
Order no. PU
9 133 054 2 ea.
ø 36
23,8
4,5
Panel roller
With soft surface for hard floors Black plastic
Order no. PU
9 133 055 2 ea.
4 x
Position bracket
For extension leaf Galvanised steel
Order no. PU
9 133 062 4 ea.
Table extension slides TrimanisAccessories
2095Technik für Möbel
HettCAD
70
3 41
959
27
5025
50159169
5080
110
Support bracket
Metal bracket for supporting folding leaf For application, see operating principle on page 2088 Galvanised steel
Order no. PU
9 133 063 2 ea.
3
247 24
20 27
32 9
29
32
49
66 36
67
10 28
60120
Cross bracket
Cross bracket for fastening frame of Frontslide Alu 77 Galvanised steel
Order no. PU
9 133 064 1 set
Table extension slides TrimanisAccessories
Recommended