View
218
Download
1
Category
Preview:
Citation preview
i304-411 1999-2000 Suzuki GSX1300R - PCIII USB - 1
1999-2000 Suzuki GSX1300RInstallation Instructions
Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89031 (800) 992-4993 www.powercommander.com
Parts List1 Power Commander1 USB Cable1 CD-ROM1 Installation Guide1 Power Adapter2 Power Commander Decals2 Dynojet Decals2 Velcro® Strip1 Alcohol Swab
You can also download the PowerCommander software and latest mapsfrom our web site at:
www.powercommander.com
The ignition MUST be turnedOFF before installation!
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
Button Adjustment Display
Faceplate Buttons
USB PortExpansion Port
1 Remove the main seat and thepassenger seat.
2 Hold the front of the fuel tankup using the prop rod located in the trunk area.
3 Locate the connector from themain wiring harness to the injector rail and uplug this con-nector (Fig. A).
NOTE: This connector is black incolor and may be covered by arubber boot.
4 Plug the connectors from thePCIII in-line of the stock wiring harness (Fig. B).
5 Route the PCIII wiring along theinside of the frame towards thebattery.
6 Attach the ground wire from thePCIII to the negative side of thebattery (Fig. C).
Fig.
AFi
g. B
Fig.
C
1999-2000 Suzuki GSX1300R - PCIII USB - 2i304-411 www.powercommander.com
Unplug this connector
Stock connectors
Ground wire from PCIII
PCIII connectors
Recommended