View
1
Download
0
Category
Preview:
Citation preview
©2017 Cummins Inc. | D-6279-EN (10/17)
Model: C44 D5e (B3.3) Frequency: 50 Hz Fuel type: Diesel
Spec sheet: S-6282-EN
Noise data sheet (open): MSP-3025
Airflow data sheet: MCP-2021
Fuel consumption Standby Prime kVA (kW) kVA (kW)
Ratings 44 (35) 40 (32)
Load 1/4 1/2 3/4 Full 1/4 1/2 3/4 Full US gph 1.1 1.5 2.3 2.7 1.0 1.4 2.2 2.7
L/hr 4.0 5.7 8.8 10.4 3.9 5.4 8.4 10.2
Engine Standby rating Prime rating Engine manufacturer Cummins
Engine model 4BTAA3.3-G14
Configuration In-line; 4 cylinder diesel
Aspiration Turbocharged and after-cooled
Gross engine power output, kWm 62.6 58
BMEP at set rated load, kPa 1538 1428
Bore, mm 95
Stroke, mm 115
Rated speed, rpm 1500
Piston speed, m/s 5.75
Compression ratio 19:1
Lube oil capacity, L 8
Overspeed limit, rpm 1650
Regenerative power, kW N/A
Governor type Mechanical as standard
Starting voltage 12 V DC
Fuel flow Maximum fuel flow, L/hr 45
Maximum fuel inlet restriction, mm Hg (clean filter) 101.6
Maximum fuel inlet temperature, °C 70
» Generator set data sheet
.
.
.
. www.ShanahanPower.com
©2017 Cummins Inc. | D-6279-EN (10/17)
Air Standby rating Prime rating Combustion air, m
3/min 4.92 4.47
Maximum air cleaner restriction, kPa 2.5
Exhaust Exhaust gas flow at set rated load, m
3/min 13.02 11.63
Exhaust gas temperature, °C 497 492
Maximum exhaust back pressure, kPa 10
Standard set-mounted radiator cooling Ambient design, °C @ 12.7mm H2O 55
Fan load, kWm 2 +/- 1
Coolant capacity (with radiator), L 10.3
Cooling system air flow, m3/sec @ 12.7 mm H2O 1.611
Total heat rejection, Btu/min 1877 1734
Maximum cooling air flow static restriction, mm H2O 25.4
Weights Open Enclosed Unit dry weight, kg (Standard skid) 922 1236
Unit wet weight, kg (Standard skid) 1010 1414
Unit dry weight, kg (optional skid) 1140 1543
Unit wet weight, kg (optional skid) 1228 1631
Dimensions Length Width Height Open set dimensions (standard skid) 2050 967 1510
Enclosed set dimensions (standard skid) 2270 975 1920
Open set dimensions (optional skid) 2270 967 1720
Enclosed set dimensions (optional skid) 2270 975 2115
.
.
.
. www.ShanahanPower.com
©2017 Cummins Inc. | D-6279-EN (10/17)
Genset outline
Open set
Enclosed set
Outlines are for illustrative purposes only. Please refer to the genset outline drawing for an exact representation of this model.
Alternator data Connection1 Temp rise ºC Duty2 Alternator Voltage Wye, 3-phase 163/125 S/P UCI22 4C 380-415
Wye, 3-phase 150/105 S/P UCI22 4D 380-415
.
.
.
. www.ShanahanPower.com
For more information contact your local Cummins distributor or visit power.cummins.com
©2017 Cummins Inc. All rights reserved. Cummins is a registered trademark of Cummins Inc. PowerCommand, AmpSentry, InPower and “Our energy working for you.” are trademarks of Cummins Inc. Other company, product, or service names may be trademarks or service marks of others. Specifications are subject to change without notice. D-6279-EN (10/17)
Ratings definitions Emergency Standby Power (ESP):
Limited-Time running Power (LTP):
Prime Power (PRP): Base load (Continuous) Power (COP):
Applicable for supplying power to varying electrical load for the duration of power interruption of a reliable utility source. Emergency Standby Power (ESP) is in accordance with ISO 8528. Fuel Stop power in accordance with ISO 3046, AS 2789 and DIN 6271.
Applicable for supplying power to a constant electrical load for limited hours. Limited-Time Running Power (LTP) is in accordance with ISO 8528.
Applicable for supplying power to varying electrical load for unlimited hours. Prime Power (PRP) is in accordance with ISO 8528. Ten percent overload capability is available in accordance with ISO 3046, AS 2789 and DIN 6271.
Applicable for supplying power continuously to a constant electrical load for unlimited hours. Continuous Power (COP) is in accordance with ISO 8528, ISO 3046, AS 2789 and DIN 6271.
Formulas for calculating full load currents:
Three phase output Single phase output
kW x 1000 kW x SinglePhaseFactor x 1000
Voltage x 1.73 x 0.8 Voltage
.
.
.
. www.ShanahanPower.com
See your distributor for more information. Shanahan Power Ltd
Uni 3, Desmond Business Park
Newcastle West
Co Limerick
Ireland, V42 YH11
Telephone: +353 (0) 69 23003
E-Mail: solutions@shanahanpower.com
Web: www.shanahanpower.com
4 3 2 1
D
C
B
A
3 2 1
D
C
B
A
4
PTC Creo ParametricR R
CKD
FIRST USED ONFOR INTERPRETATIONOF DIMENSIONING ANDTOLERANCING, SEE
APVD
DWNSIM TOUNLESS OTHERWISE SPECIFIED, ALLDIMENSIONS ARE IN MILLIMETERS
17.50-24.99 +0.30/-0.13
10.00-17.49 +0.25/-0.13
5.00- 9.99 +0.20/-0.10
0.00- 4.99 +0.15/-0.08
DIM
HOLE
ANG TOL
DO NOT SCALE PRINT
SCALE
SITE CODE
CUMMINS POWER GENERATION
SIZEDWG
E
DATE
A054J456THIS DOCUMENT (AND THE INFORMATION SHOWN THEREON) ISCONFIDENTIAL AND PROPRIETARY AND SHALL NOT BE DISCLOSED TO OTHERSIN HARD COPY OR ELECTRONIC FORM, REPRODUCED BY ANY MEANS, ORUSED FOR ANY PURPOSE WITHOUT WRITTEN CONSENT OF CUMMINS INC.
R
NOREVREL NO DATEAPVDCKDDWNREVISION
OF
CAD SHEET
1 2
= =96738.1[ ]
= =84333.2[ ]
89735.3[ ]
100640[ ]
483.519[ ]
483.519[ ]
( )
O/AHEIGHT
192076[ ]1818
72[ ]
227690[ ]
103840.9[ ]
DOOR OPENING
2817110.9[ ]
DOOR OPENING
226589[ ]
O/A WIDTH
97538[ ]
76130[ ]
( )512[ ]
1104[ ]
167365.9[ ]
O/A LENGTH 227089[ ]
51620[ ]
143056[ ]
32413[ ]
38515[ ]
1335.2[ ]
DISPLAYCENTER
130051[ ]
DISPLAY CENTER
186974[ ]
110143[ ]
124349[ ]
30212[ ]
65325.7[ ]
1204.7[ ]
151860[ ]
77831[ ]
1265[ ]
A
83332.8[ ]
34314[ ]
173968[ ]
4X 351.4[ ]
813.2[ ]
B
1676.6[ ]
225689[ ]
ECO-168719 C 1 ADD CE TO EXTERNAL REGULATIONS MR PJ A_PATIL 21MAR17
1X �#�
0.8 .X �#�
0.38 .XX�#�
1.0 1/8 B3.3 INT'LASME Y14.5-2009
04FEB15
A_PATIL
P_JARALI
D_ROKADE
OUTLINE,ENCLOSURE
CIL
A045B515
WEIGHT AND C.G DATA (APPROX)
S/NGENSET MODEL
ENGINE MODELALTERNATOR
FRAMEGENSET DRY WEIGHT (KG)
GENSET WET WEIGHT (KG)
CG LOCATION
DIM A DIM B
1
C40,C44C50,C55C60,C66
G14/G12/G13
UC224C 1313 1401 1257 639
2 UC224D 1326 1414 1263 638
3 UC224E 1353 1441 1275 636
4 UC224F 1373 1461 1283 635
5 UC224G 1423 1511 1302 631.5
SERVICE CONNECTION DETAILS FUEL INLET CONNECTION : �n�10 FUEL RETURN CONNECTION : �n�10 WATER INLET CONNECTION : �n�46 WATER OUTLET CONNECTION : �n�33.5 EXHAUST OUTLET CONNECTION: �n�72 AIR INLET CONNECTION : �n�76.5
NOTES: 1 .DIMENSION SHOWN IN [ ] IN INCHES. 2. THE DIMENSIONS AND C.G DATA ARE FOR REFERANCE ONLY 3. ENCLOSURE MOUNTED EYE BOLTS TO BE USED FOR LIFTING GENSET . 4. AIR CLEANER IS MEDIUM DUTY 5. REMOVE SHIPPING BRACKET BEFORE STARTING THE GENSET. 6. VIEWS SHOWS STANDARD SCOPE BASE SKID 7. FUEL TANK CAPACITY 156 LTR APPROX(12 HRS.FUEL AUTONOMY) 8. CUSTOMER LOAD CABLES TO BE FLEXIBLE TO ALLOW MOVEMENTS OF GENSET ON ANTI VIBRATION MOUNTS 9. FOR ALTERNATOR AND ENGINE COMBINATIONS REFER SHEET 2 10. APPLY DRY TORQUE UNLESS AND OTHERWISE SPECIFIED 11. REFER STD OPRATING MANUAL FOR ANY TECHNICAL PROBLEM 12. THIS OUTLINE IS FOR C40,C44,C50,C55,C60,C66 GENSETS
AIR IN
AIR OUT
RADIATOR END
ALTERNATOR END
AIR IN
AIR OUT
AIR IN
AIR OUT
SINGLE POINT LIFT
3D VIEWSCALE 3/32
PART A054L836 IS SUPPLIED IN KIT AND NEED TO INSTALLED AT THE TIME OF GENSET COMMISIONING
POWER CABLE ENTRY
AIR OUT
AIR OUT
CEPGG 1-01-01-116. This item impacts compliance with these External Regulations:
Regulatory Review and Approval is required prior to changing this item per
ECO-168719 Sheet 1 of 3Part Name: A054J456 Revision: C
Drawing Name: A054J457 Revision: C
4 3 2 1
D
C
B
A
3 2 1
D
C
B
A
4
PTC Creo ParametricR R
CKD
FIRST USED ONFOR INTERPRETATIONOF DIMENSIONING ANDTOLERANCING, SEE
APVD
DWNSIM TOUNLESS OTHERWISE SPECIFIED, ALLDIMENSIONS ARE IN MILLIMETERS
17.50-24.99 +0.30/-0.13
10.00-17.49 +0.25/-0.13
5.00- 9.99 +0.20/-0.10
0.00- 4.99 +0.15/-0.08
DIM
HOLE
ANG TOL
DO NOT SCALE PRINT
SCALE
SITE CODE
CUMMINS POWER GENERATION
SIZEDWG
E
DATE
A054J456THIS DOCUMENT (AND THE INFORMATION SHOWN THEREON) ISCONFIDENTIAL AND PROPRIETARY AND SHALL NOT BE DISCLOSED TO OTHERSIN HARD COPY OR ELECTRONIC FORM, REPRODUCED BY ANY MEANS, ORUSED FOR ANY PURPOSE WITHOUT WRITTEN CONSENT OF CUMMINS INC.
R
NOREVREL NO DATEAPVDCKDDWNREVISION
OF
CAD SHEET
2 2
89735[ ]
1429.856[ ]
317.212.5[ ]
38.61.5[ ]
4X 180.7[ ]
753[ ]
753[ ]
753[ ]
753[ ]156.6
6.2[ ]
2359.3[ ]
98138.6[ ]
2359.3[ ]
226989[ ]
38.61.5[ ]
89735.3[ ]
97438[ ]
B3.3 INT'L ALTERNATOR MATRIX
RATING STANDBY PRIME
GENSET MODEL
STANDBYRATING
kVA (kWe)
STANDBYRATING
kWe (kVA)
PRIME RATING
KVA (kWe)
PRIME RATING
kWe (kVA)ENGINE MODEL VOLTAGE WINDING
STD TEMP RISE OPTIONAL TEMP RISE STD TEMP RISE OPTIONAL TEMP RISE
163/27 150/40 125/40 105/40
C44D5 44 (35) - 40 (32) - 4BTAA3.3G14/G13 190 - 416 V 311UCI224C (46.8)(A053B575)
UCI224D (53)(A053B577)
UCI224C (42.5)(A053B575)
UC224D (45)(A053B577)
C55D5 55 (44) - 50 (40) - 4BTAA3.3G14/G13 190 - 416 V 311UCI224D (55)(A053B577)
UCI224E (61)(A053B579)
UCI224D (50)(A053B577)
UC224E (53)(A053B579)
C66D5 66 (53) - 60 (48) - 4BTAA3.3G14/G13 190 - 416 V 311UCI224F (80)(A053B581)
UCI224G (90.8)(A034E089)
UCI224E (60)(A053B579)
UC224F (65)(A053B581)
C40D6 - 40 (50) - 36 (45) 4BTAA3.3G12
190 - 200 V & 380 - 400 V 14UCI224C (60)(A052U904)
UCI224D (65)(A052U911)
UCI224C (55)(A052U904)
UCI224D (56)(A052U911)
208 - 240 V & 416 - 480 V 311UCI224C (55)(A053B575)
UCI224D (62.5)(A053B577)
UCI224C (50)(A053B575)
UCI224D (52.5)(A053B577)
C50D6 - 50 (62.5) - 45 (57) 4BTAA3.3G12
190 - 200 V & 380 - 400 V 14UCI224D (66.3)(A052U911)
UCI224E (73.8)(A052V396)
UCI224D (62.5)(A052U911)
UCI224E (65)(A052V396)
208 - 240 V & 416 - 480 V 311UCI224D (65)(A053B577)
UCI224E (70)(A053B579)
UCI224D (60)(A053B577)
UCI224E (62.5)(A053B579)
C60D6 - 60 (75) - 55 (68) 4BTAA3.3G12
190 - 200 V & 380 - 400 V 14UCI224E (75)(A052V396)
UCI224F (89.4)(A052V401)
UCI224E (70)(A052V396)
UCI224F (75)(A052V401)
208 - 240 V & 416 - 480 V 311UCI224F (91.9)(A053B581)
UCI224G (98.1)(A054N520)
UCI224F (83.8)(A053B581)
UCI224G (87.5)(A054N520)
ECO-168719 C - --- MR PJ A_PATIL 21MAR17
1X �#�
0.8 .X �#�
0.38 .XX�#�
1.0 5/32 B3.3 INT'LASME Y14.5-2009
04FEB15
A_PATIL
P_JARALI
D_ROKADE
OUTLINE,ENCLOSURE
CIL
A045B515
FOOT PRINT DETAILS
WITH FOOTSWITH OUT FOOTS
3D VIEWSCALE 1/8
3D VIEWSCALE 1/8
16X M12 WELD NUT
CEPGG 1-01-01-116. This item impacts compliance with these External Regulations:
Regulatory Review and Approval is required prior to changing this item per
ECO-168719 Sheet 2 of 3Part Name: A054J456 Revision: C
Drawing Name: A054J457 Revision: C
Part A054J456 C
Part Specifications :A054J456 C
Description Legacy Name External Regulations Application Status Release Phase Code Security Classification Alternates
OUTLINE,ENCLOSURE A054J456 CE Production Only Production Internal use Only
Name Description Legacy Name
A030B356 SPECIFICATION,MATERIAL CES10903
A054J457 DRAWING,ENGINEERING A054J457
CEPGG 1-01-01-116. This item impacts compliance with these External Regulations:
Regulatory Review and Approval is required prior to changing this item per
ECO-168719 Sheet 3 of 3Part Name: A054J456 Revision: C
Drawing Name: A054J457 Revision: C
Recommended