View
23
Download
1
Category
Preview:
Citation preview
6180 HMC
4400Star-Lifter
green line Material Handling Machine165,400 lbs.
426 HPC Series
Leading Through Innovation
6180 HMC
4400Star-Lifter
2
• 6 cylinder, water cooled, turbo Caterpillar C11 Acert diesel engine, with direct injection
• Output as per DIN/ISO: 426 HP at 1900 rpm
• Radiator fan is hydraulically driven and is reversible to clean out debris from radiator
• Equipped with engine intercooler• Dry air filter with cyclone prefilter, safety
element and pollution indicator
• Fuel tank capacity: 250 gallons• Electrical system:
24 volt, 2 x 12 volt high performance batteries
• Computer free load-sensing hydraulic system with energy saving flow on demand control and pressure cut off function
• All working functions can be operated simultaneously and be individually controlled very precisely due to the independent and proportional split of the oil feed from the variable displacement pumps
• Hydraulic system designed for low pressure losses and heat generation by large diameter piping and hoses as well as large control valves
• Pilot operated joy sticks control all working and auxiliary functions
• Flow rate 1 x 250 gpm• Working pressure 5075 psi• Hydraulic tank capacity 254 gallons
• Special ultra fine filtration system (99.95% efficiency at 2 micron) designed to protect the hydraulic system, extending the life of all components and reducing the down time of the machine as well as the maintenance and repair costs
• Full flow return oil filters with extended change intervals
• Oversized hydraulic oil cooler, mounted completely separated from the water radiator, maintaining the oil temperature at an ideal level. The fan is hydraulically driven and thermostatically controlled
• Centralized pressure test ports, easily accessible from ground level, mounted and well protected on the left side of the machine, enable fast trouble shooting of all machine functions without any electronic support
• 33 kW Baldor generator, belt driven for easy operation and maintenance, combined with a Hubbell controller
• 2.5 - 5.0 cu. yds. scrap grapple with rotation, 4 or 5 tine, open, semi-closed or closed, depending on the weight of the grapple and operating reach
• 2.0 - 7.0 cu. yds. clamshell grapple with rotation, depending on the material density, weight of the grapple and operating reach
• Log grapple available in different sizes and configurations depending on material being handled
• Contact Sennebogen for approval of the attachment before operating the machine
• Always refer to the lifting capacities on the chart before installing any attachment
• Basic 870 with 4 point outriggers, material handling boom 34'5", stick 26'3" and scrap grapple 4 cu. yds.
Approximate weight 165,400 lbs.Given weights may vary with different equipment
• Comfortable maXCab operator’s cab resiliently mounted
• Sound absorbing insulation• Roomy compartment with excellent
all-round visibility• All weather design with tinted safety glass• Door window as sliding window• Windshield can be pushed up under cab roof• Large skylight• Windshield wiper/washer on both windshield
and skylight• Sun visor• Large capacity storage bin• Ergonomically designed, air suspension and
heated seat with adjustable armrests and lumbar support
• Well laid out instrument panel with ergonomically shaped joy sticks
• Infinitely variable cab heating system, outside air and circulating air stages with particle filter
• Five adjustable air vents for optimum work environment
• New Sennebogen Diagnostic System (SDS) for monitoring all essential machine and engine functions with visual and audible warning system
• 12 and 24 volt power supply• Air conditioning• AM/FM radio with CD player
• Axial piston motors, spring-loaded hydraulically releasable multiple disk brake, planetary gears and pinion shaft
• Large dimensioned swing bearing• Swing speed: 0 - 6,2 rpm, infinitely controllable• Hydraulic motors with integrated hydraulic
brake valves keep wear and tear of braking system to a minimum
• Undercarriage welded as rigid, torsion-free box-type design
• 4-point outriggers with individual control• Lockable storage compartment• Tires: 8 x 16.00-25 solid rubber tires with
intermediate protector ring
• All wheel drive via 2 variable hydraulic motors with directly mounted automatic brake valve
• 2-circuit servo brake system with additional safety brake as parking brake
• Special design, heavy duty, extra wide, 70 t axles• Steering axle as hydraulically controllable
oscillating axle• Oscillating axle cylinders with safety
check valves• Travel speed: 6.8 mph
• Torsion-free upper frame with continuous bearing-plates for optimal power introduction, precision machined
• Steel bushings for the boom pivot• Low noise emission
• Box-type design with large dimensioned sealed bearings for long working life
• Grapple open-close and rotate circuits installed on the machine
• Working cylinders with hydraulic end position damping.
• Optimized design for high lifting capacities• Equipped standard with safety check valves
(load holding valves) for boom and stick cylinders
• The 870 M C Series material handling equipment has been specially designed for the increased demands of high-performance operation, increased productivity and output
Specifications
Engine
Hydraulic System
Undercarriage
Uppercarriage Operator’s Cab
Operating Weight
■ Working radius up to 68'11"■ No computers required to control hydraulic system■ Ultra fine hydraulic oil filtration system reduces
maintenance cost and down time of machine
■ Central lubrication system standard■ State-of-the-art load-sensing hydraulic system■ Powerful maintenance-friendly design■ Low noise emission
Swing System
Working Equipment
Magnet System
Grapple
Certification according to regulations
Subject to technical modification
6180 HMC
4400Star-Lifter
3
61,500
70,980
37,910
23,580
20,940
21,380
22,920
23,140
44,750
49,820
55,330
59,740
58,640
40,780
35,710
34,830
24,250
34,170
36,370
39,240
42,540
45,850
48,720
50,480
51,360
50,700
48,500
44,970
18,510
24,470
27,990
30,200
30,640
31,520
33,060
35,050
37,250
39,460
41,220
42,540
43,210
42,760
41,220
38,360
18,950
24,030
27,550
28,880
29,540
30,640
31,740
33,280
34,830
35,930
36,590
36,150
35,710
35,270
32,840
18,070
22,920
26,670
27,770
28,430
29,320
30,200
31,080
31,520
31,080
30,640
30,420
30,200
28,210
15,650
20,720
24,690
26,670
27,110
27,770
27,550
27,110
26,890
26,670
26,450
26,230
16,530
20,500
23,800
24,250
24,030
23,800
23,580
23,360
23,360
]
22,040
17,190
17,850
17,630
870.M.KA10.5ST8.0 MP70 abgestütztTabelle Nr.: Prospekt 2002 ...I.14112002130411
Bearbeiter: kalue]atum : 14.11.2002
870
807570656055504540353025201510Feet
Meters
50 85 90
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
0
5
10
15
20
25
30
35
40
45
50
55
-25
-20
-15
-10
-5
- 9
- 8
- 7
- 6
- 5
- 4
- 3
- 2
- 1
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
-30
60
65
Meters Feet
machine shown in mirror image14112002130411
Boom Position IK18
870 M■ Undercarriage: MP70, 4-point outriggers
tires 8 x 16.00-25■ Boom: 34'5"■ Stick: 26'3"■ Boom position: I■ Cab: D 270 maXCab hydraulic elevating
cab with operator’s eye level 20'2"
Load chartNotes:Lift capacities are stated in pounds. Indicated loads are based on ISO 10567 and do not exceed 75% of tipping and 87% of hydraulic capacity. Machine on firm, level support ing surface. Loads valid for 360° on outriggers supported.Lifting capacities do not include working attachments such as scrap grapples, magnets, etc. Their weights must be deducted from the numbers indicated in the lifting charts.
6180 HMC
4400Star-Lifter
4
59,300
68,120
29,980
19,180
16,970
17,190
18,290
42,760
47,830
52,910
57,090
42,980
30,860
27,330
26,670
26,890
34,390
37,250
40,340
43,430
46,290
48,060
48,940
48,500
43,430
41,440
18,730
22,480
24,910
27,550
28,430
29,540
31,080
33,060
35,050
37,250
39,020
40,340
41,000
41,000
39,900
37,910
34,830
18,950
22,260
24,910
26,010
26,450
27,330
28,430
29,760
31,300
32,620
33,950
34,830
35,050
34,390
34,170
32,840
30,200
18,510
21,820
24,690
24,910
25,570
26,230
27,330
28,210
29,320
29,980
30,200
29,760
29,320
29,100
28,430
26,230
17,630
20,940
23,580
24,030
24,470
25,130
25,790
26,450
26,450
26,010
25,790
25,350
25,130
24,910
15,870
19,180
22,040
22,920
23,360
23,800
23,360
23,140
22,700
22,480
22,260
22,260
21,380
15,870
18,730
21,160
20,940
20,500
20,280
20,060
20,060
19,840
19,840
12,780
14,770
16,310
17,190
17,190
16,310
870.M.KA11.5ST9 MP70 abgestütztTabelle Nr.: Prospekt 2002 ...I.14112002080248
Bearbeiter: kalue]atum : 14.11.2002
Hyd. FH C 300/220KA 11.5 (Teile Nr. D 010385)
GKST 9.0 (Teile Nr. D 010392)
II / S.5
Hyd. FH C 300/220
KA 11.5 (Teile Nr. D 010385)
GKST 9.0 (Teile Nr. D 010392)
807570656055504540353025201510Feet
Meters
50 85 90
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
- 10
- 9
- 8
- 7
- 6
- 5
- 4
- 3
- 2
- 1
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
0
5
10
15
20
25
30
35
40
45
50
55
-25
-20
-15
-10
-5
-30
19
20
60
6521
22
Meters Feet
machine shown in mirror image14112002080248
Boom Position IK20
870 M■ Undercarriage: MP70, 4-point outriggers
tires 8 x 16.00-25■ Boom: 37'9"■ Stick: 29'6"■ Boom position: I■ Cab: D 300/260 maXCab hydraulic elevating and forward
moving cab with operator’s eye level 21'6"
6180 HMC
4400Star-Lifter
5
39,240
15,210
12,560
12,780
13,880
15,210
16,310
57,980
37,690
23,580
20,060
19,400
19,620
20,280
20,940
38,800
44,970
50,480
48,500
34,170
29,320
27,550
27,110
27,330
28,210
33,280
37,250
40,780
43,870
46,290
47,390
43,650
40,560
39,900
40,780
26,890
29,320
32,180
34,610
36,810
38,580
39,680
40,120
39,900
38,800
36,810
23,140
24,690
26,670
28,430
30,200
31,960
33,280
34,170
34,170
33,950
33,500
31,740
13,880
8.1
20,060
20,280
20,940
22,040
23,140
24,470
25,790
27,110
28,210
29,320
29,320
29,100
28,880
28,650
27,550
13,000
16,750
19,840
20,280
20,940
21,820
22,700
23,580
24,690
25,570
25,790
25,350
25,130
24,910
24,910
23,800
14,770
17,850
20,060
20,720
21,380
22,040
22,700
22,920
22,480
22,260
22,040
22,040
14,100
16,530
18,950
20,720
20,500
20,280
20,060
19,840
870.M.BA11.5ST9 MP70 abgestütztTabelle Nr.: Prospekt 2002 ...I.15112002074357
Bearbeiter: kalue]atum : 15.11.2002
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
807570656055504540353025201510Feet
Meters
50 85 90
- 13
- 12
- 11
- 10
- 9
- 8
- 7
- 6
- 5
- 4
- 3
- 2
- 1
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
0
5
10
15
20
25
30
35
40
45
50
55
-25
-20
-15
-10
-5
-30
-35
-40
Meters Feet
machine shown in mirror image15112002074357
Boom Position IB19
870 M■ Undercarriage: MP70, 4-point outriggers
tires 8 x 16.00-25■ Boom: 37'9" banana type■ Stick: 29'6"■ Boom position: I■ Cab: D 270 maXCab hydraulic elevating cab
with operator’s eye level 20'2"
6180 HMC
4400Star-Lifter
6
Machine Specifications
■ 870 M with 8'10" hydraulic elevating Cab Type - maXCab D 270
13'9"
12'1"
21'4"
23'7"
11'1
0"8'
10"
20'8
"
10"
12'7
"
10'10"
6'10"
16'9"
18'7"
5'7"
13'7
"
12'5"
13'9"
12'1"
21'4"
23'7"
11'1
0"8'
10"
20'8
"
10"
12'7
"
10'10"
6'10"
16'9"
18'7"
5'7"
13'7
"
12'5"
■ 870 M with fixed cab height 4'11"
8'6" 9'10"
18'4"
12'2
"
22'
9'10
"
13'9"
13'7
"
■ 870 M with hydraulic elevating and forward moving Cab Type - maXCab D 300/260
Depending upon tolerances, measurements may vary.
6180 HMC
4400Star-Lifter
7
51'2"
12'7
"
*13'
7"
870 M with Boom 34'5" and Stick 26'3"
54'5"
12'7
"
*13'
7"
870 M with Boom 37'9" and Stick 29'6"
870 M with Banana Boom 37'9" and special Stick 29'6"
53'8"
12'7
"
*13'
7"
Shipping Specifications
*Removable for transport
870
M-C
-US
A-1
211-
2.5www.sennebogen-na.com
Under our policy of continuous improvement, we reserve the right to change specifications and design without prior notice. The illustrations shown may include optional equipment.
SENNEBOGEN LLC1957 Sennebogen TrailStanley, NC 28164, USATelephone: 704-347-4910Fax: 704-347-8894E-Mail: sales@sennebogenllc.com
Left side compartment holds key components■ Diesel tank■ Electrical box with all fuses and relays for easy access
and centralized electrical maintenance■ Central lubrication system■ Centralized pressure test ports for trouble shooting
of all working functions
Serviceability■ The C Series machines offer a coarse particle separator
at the front of engine cooler and air filter■ Ease of access for air filter and battery maintenance■ Hydraulic oil cooler separated from radiator, mounted on
the left side towards the back of the machine, hydraulically driven and easy to clean
■ The radiator fan is reversible and controlled from the cab, allowing the driver to clean out any debris from the radiator compartment
Comfortable maXCab operator’s cab■ Sliding door and walkway for increased operator safety■ Advanced design, clear layout■ Low noise and vibration■ Excellent all-round visibility■ Fully adjustable air suspension seat, heated■ Heating and air conditioning with fresh / recirculation
airflow and air filter
Large engine compartment■ Powerful water-cooled Caterpillar diesel engine
longitudinally mounted for ease of access■ Daily service conveniently and easily performed
from ground level■ Large access door with gas shocks provide easy
access to engine compartment
6180 HMC
4400Star-Lifter
Recommended