View
52
Download
0
Category
Tags:
Preview:
DESCRIPTION
A GENERIC OFFICE WITHOUT THE WISENET SYSTEM. A GENERIC OFFICE WITH THE WISENET SYSTEM. WHAT THE WISENET SYSTEM CONSISTS OF. Gateway / Server / Wireless Network Manager. - PowerPoint PPT Presentation
Citation preview
A GENERIC OFFICE WITHOUT THE WISENET SYSTEM
A GENERIC OFFICE WITH THE WISENET SYSTEM
WHAT THE WISENET SYSTEM CONSISTS OF
Gateway / Server / Wireless Network Manager
Router Repeater / Mesh Node
Sensor / Activity Counter / Star Node
The Gateway or PAN Coordinator automatically discovers and manages the Router Repeaters and Sensors that are designated to be part of the Network. The Gateway only communicates directly with the Router Repeaters.
The Router Repeaters communicate with the Sensors and receive the actual counts of activity at each individual Workstation or Position. They in turn forward that data to the Gateway. Each Router Repeater can support a maximum of 32 Sensors, 20 is optimal.
The Sensors are installed at each work position to be measured and forward their activity counts to the Router Repeaters which in turn forward that data to the Gateway where it is stored for daily transmission over the Internet to the Abintra Wisenet client application. The data can be shared with other applications using the site IT Infrastructure.
WISENET IS A FULLY AUTONOMOUS, SELF HEALING DISCREET WIRELESS MESH NETWORK
•Installation takes place during unoccupied periods•Sensors are mounted under work surfaces•Router Repeater Mesh Nodes connect to power outlets•Gateways connect to Customer IT Network
REPORTS VIA WEB PORTAL
• Data from Sensors is pushed to Router Repeaters• Data from Router Repeaters is pushed to Gateway• Data from Gateway is pushed to Abintra Client Application
Site Firewall
Abintra Client App
TECHNICAL POINTSQ Can the Abintra Wisenet Wireless Network interfere with other wireless infrastructure in our facility ?
A No, the transceiver power levels are too low to affect 2.4 GHz Wi-Fi Traffic and we use continuous dynamic Frequency Hopping techniques to avoid transmitting on saturated channels.
Q Are there any health risks associated with the wireless network devices?
A No, again the power levels are significantly less than those associated with Wi-Fi or even individual cell phones.
Q What are the sensors active elements?
A The active element in the sensor is a Passive Infrared Motion Sensor that senses the human body heat wave form signature, no cameras, no microphones, and no RFID tags.
Q What type of Wireless Network is Wisenet?
A It is 802.15.4, similar to 802.11 it operates in the same 2.4 GHz RF spectrum but at highly restricted transmission intervals and power levels.
Q How is the Network secured?
A All Mesh communication traffic is in compliance with the NIST AES-197 encryption standards.
WHAT WISENET SEES
TIME: 09:50WorkstationsConference RoomTouchdown
Count241212
Occupied18120
Utilization75.0%
100.0%0.0%
Occupied
Unoccupied
66.6%16.6%25.0%
HOW DATA CAN BE USED TO EVALUATE OR AUGMENT OTHER FACILITY FUNCTIONS
TIME: 10:00WorkstationsConference RoomTouchdown
Count241212
Occupied1623
Utilization
•The Meeting Room with 12 Seats was booked through the In House Event Management System for a party of 9, yet only 2 people actually used the room for most of the booked time.
FOLLOWING THE SURVEY CHANGES TO THE SPACE CAN BE MADE WITH PRECISION
58.3%0.0%0.0%
TIME: 10:10WorkstationsConference RoomTouchdown
Count241212
Occupied1400
Utilization
10 MINUTE RESOLUTION PROVIDES HIGHLY ACCURATE USE RATE
79.2%0.0%8.3%
TIME: 10:20WorkstationsConference RoomTouchdown
Count241212
Occupied1901
Utilization
OTHER FACTORS SUCH AS VACATION AND FIELD DUTIES CAN BE FACTORED
79.2%8.3%8.3%
TIME: 10:30WorkstationsConference RoomTouchdown
Count241212
Occupied1911
Utilization
STATISTICALLY THIS CONFERENCE ROOM CAN BE CONVERTED FOR OTHER USE
83.3%8.3%8.3%
TIME: 10:40WorkstationsConference RoomTouchdown
Count241212
Occupied2011
Utilization
Now that you have Utilization / Occupancy Data what else can be done with it?
• Dynamic feed forward information to Lighting Control Systems
• Dynamic feed forward information to Building Automation Systems
• Dynamic feed forward information to Security Administration
• Daily Reports to Facility Services
THESE NEXT SLIDES DEPICT HOW A DYNAMIC MEASUREMENT OF OCCUPANCY CAN BEAPPLIED TO THE CONTROL OF NEXT GENERATION LIGHTING PRODUCTS THAT ARE
AVAILABLE TODAY. CONTROL ENGINE BY EXP , LED LUMINAIRES BY TREND LIGHTING AND DYNAMIC OCCUPANCY MEASUREMENT BY ABINTRA WISENET.
Abintra Lighting Description
Points
• System diagram – type 1 – 1 fixture / driver• System diagram – type 2 – N fixtures / driver• Recommend Luminaire specifications• Recommend Driver specifications• Appendix: Other Luminaire & Driver selections
type 1 – 1 luminaire/ driverdescription
• All luminaires are Class 2 LED light fixtures• Each LED driver is paired with only one luminaire• LED drivers are located remotely• The LED driver model is dimmable• 1 wireless dimmer module dims single or multiple
LED drivers depending on resolution desired
type 1 – 1 Luminaire / Driver
DC- + DC- +DC- +luminaireluminaire luminaire
Wireless Dimmer
LED driver LED driver LED driverLine Voltage +-
1-10V or PWM or On/Off switch
Zone 1
DC- + DC- +DC- +luminaireluminaire luminaire
Wireless Dimmer
LED driver LED driver LED driverLine Voltage +-
1-10V or PWM or On/Off switch
Zone 2
DC- + DC- +DC- +luminaireluminaire luminaire
Wireless Dimmer
LED driver LED driver LED driverLine Voltage +-
1-10V or PWM or On/Off switch
Zone 3
type 2 – N luminaires/ driverdescription
• All luminaires are Class 2 LED light fixtures• Each LED driver is paired with single or multiple
luminaires• LED drivers are located remotely• The LED driver model is dimmable• 1 wireless dimmer module dims single or multiple
LED drivers depending on resolution desired
type 2 – N luminaires/ driver
DC- +
DC- +
DC- +
luminaireluminaire luminaire
Wireless Dimmer
LED driverLine Voltage+-
1-10V or PWM or On/Off switch
Zone 1
DC- +
DC- +
DC- +
luminaireluminaire luminaire
Wireless Dimmer
LED driverLine Voltage+-
1-10V or PWM or On/Off switch
Zone 2
DC- +
DC- +
DC- +
luminaireluminaire luminaire
Wireless Dimmer
LED driverLine Voltage+-
1-10V or PWM or On/Off switch
Zone 3
LED luminaire 2x2
• PN: GLT Ceiling Lighting 6060 UL• 46W, 36VDC(estimated.
Depending on the driver chosen)• 3000 LM output• Beam Angle 110°-120°• Net Weight/Gross Weight: 12.5
lbs. (N.W)• UL certified
LED luminaire 2x4
• PN: JZPL1206-B1-36V• 83W, 36VDC (estimated.
Depending on the driver chosen)
• 6000 LM output• Beam Angle 110°-120°• Dimensions:
1598L*598W*44.6H(mm)/ 47.2L * 23.6W * 1.77H inch
• Net Weight/Gross Weight: 25.5 lbs. (N.W)
• UL
• 60W• 95% high efficiency• 110~277VAC input• 3 in 1 dimming function (1~10VDC, PWM signal
or resistance)• Withstand 4kV surge, suitable for LED street
lighting• UL / CUL / TUV / PSE / CE certified• 5 years warranty
LED driver - 1 luminaire/ driver
HLG – 60H- 36B
• 100W• 95% high efficiency• 180~480VAC input• 3 in 1 dimming function (1~10VDC, PWM
signal or resistance)• Withstand 4kV surge, suitable for LED street
lighting• UL / CUL / TUV / PSE / CE certified • 5 years warranty
LED driver - 1 luminaire/ driver HVG – 100- 36B
• 320W• 95% high efficiency• 110~277VAC input• 3 in 1 dimming function (1~10VDC,
PWM signal or resistance)• Withstand 4kV surge, suitable for LED
street lighting• UL / CUL / TUV / PSE / CE certified
• 5 years warranty
LED driver - N luminaire/ driver HLG – 320H- 36B
Dimmable LED driver list
• HLG Series - B type: IP67, 3 in 1 dimming function (1~10VDC, PWM signal or resistance) – HLG-40H-XXB– HLG-60H-XXB– HLG-80H-XXB– HLG-100H-XXB– HLG-120H-XXB– HLG-150H-XXB– HLG-185H-XXB– HLG-240H-XXB– HLG-320H-XXB– XX means Voltages=12,15,20,24,30,36,42,48,54
• HVG(C) Series - B type: IP67, 3 in 1 dimming function (1~10VDC, PWM signal or resistance)– HVG-100-XXB– HVG-150-XXB– XX means Voltages=12,15,20,24,30,36,42,48,54
• HLP Series– HLP-40H-XX– HLP-60H-XX– HLP-80H-XX– XX means Voltages=12,15,20,24,30,36,42,48,54
• HLN Series - B type: 3 in 1 dimming function (1~10VDC, PWM, resistance)
– HLN-40H-XXB– HLN-60H-XXB– HLN-80H-XXB– XX means Voltages=12,15,20,24,30,36,42,48,54
• LPF Series - D type: 3 in 1 dimming function (1~10VDC, PWM, resistance)
– LPF-16D-XX– LPF-25D-XX– LPF-40D-XX– LPF-60D-XX– LPF-90D-XX– XX means Voltages=12,15,20,24,30,36,42,48,54
• ELN Series– ELN-30-XXD– ELN-30-XXP– ELN-60-XXD– ELN-60-XXP– XX means Voltages=12,15,20,24,27,48
• If dimming not required, switching power supplies can be used.
EXP Niagara Control Engine
Occupancy / Utilization Data feed forward to the local control engine from the Abintra Sensing Network.
Control Actions, On/Off, Dimming, Ambient Adjustment, Master Scheduling feed from the control engine to individual groups of LED’s.
In the example shown below in an existing facility the furniture infrastructure may not always be ideally in alignment with the existing Lighting Fixture locations. The Fixtures highlighted in red would be the Master LED Luminaire with the PWM Driver and the
associated slave LED’s would be connected by low voltage Class II cabling.
IN THIS SCENARIO ONLY 29% OF THE AREA LIGHTING NEED BE AT 100%
71% OF THE LIGHTING NEED ONLY OUTPUT AT 20%
LIGHTING ENERGY SAVINGS OF 50% DYNAMICALLY CONTROLLED
• Savings from LED vs. T8 Fluorescent 42%• Savings of 50% on LED Luminaires via Occupancy Control• Savings 8% on avoided HVAC Lighting Load Cooling
THESE NEXT SLIDES DEPICT HOW DYNAMIC MEASUREMENT OF OCCUPANCY CAN BEAPPLIED TO AUGMENT YOUR EXISTING BUILDING AUTOMATION SYSTEM PROCESSES, NOT BY DIRECTLY CONTROLLING RELATED HVAC SYSTEMS BUT BY PROVIDING HIGHER
RESOLUTION OCCUPANCY DATA TO THOSE SYSTEMS THAT SERVE THE OCCUPIED AREAS.
WHAT THE BUILDING AUTOMATION SYSTEM SEES
Typical Area Covered by a BAS Sensor Controlling a VAV Box serving 4,000 Square FeetSingle Point of Measurement
4 Deg F Above Set Point
2 Deg F Above Set Point
At Set Point
2 Deg F Below Set Point
4 Deg F Below Set Point
4 Deg F Above Set Point
2 Deg F Above Set Point
At Set Point
2 Deg F Below Set Point
4 Deg F Below Set Point
WHAT WISENET SEES
Typical Area Covered by a BAS Sensor Controlling a VAV Box serving 4,000 Square FeetSingle Point of Measurement
Because each Wisenet Sensor can be populated with a Temperature Sensor a detailed heat map of each area down to position level can be dynamically acquired.
WHAT THE FACILITY MAINTENANCE DEPARTMENT CAN NOW SEE
Typical Area Covered by a BAS Sensor Controlling a VAV Box serving 4,000 Square FeetSingle Point of Measurement
The air distribution ductwork downstream from the VAV Box typically has manual balancing dampers which are initially set by the contractor of record.
Over the course of time with internal equipment changes and floor layout alterations the air balance may not be adequate for the space.
Wisenet can prove to be a valuable tool to assist the Facility Maintenance personnel in solving these comfort, and ultimately productivity issues.
WHAT THE ACCOUNTING DEPARTMENT CAN NOW SEE
Section 9. from Use Case Example of 65,000 Square Foot building.
Questions
Recommended