View
233
Download
5
Category
Preview:
Citation preview
I N D U S T R Y A P P L I C A T I O N S S E R I E S
A Guide to Level Instrumentation for Onshore/Offshore Oil Processing
APPLICATION PAGE
1. Production Fluid Storage 3
2. Chemical Injection 3
3. Wellstream Separator 4
4. Crude Dehydration 5
5. Crude Desalting 5
6. Crude Degassing 6
7. Water Processing 6
8. Storage Tanks 7
9. Vapor Recovery 7
Level & FlowApplications forCRUDE OILPROCESSINGLevel and flow controlsin these applications arecrucial for both processcontrol and safetyshutdown systems.
Plant Inlet
Crude StreamLevel Applications
Skim Tanksand Vessels
Sumps
Primary Water Treatment
Fluid Tanks
Desalting
Collection Tanks
Separation
Crude Dehydration
TestSeparation
3
1
2
Coalescers
Recycle Gas/Flare
Degassing
Crude Collectionand Storage Tanks
4 8
Natural Gas Processing
Natural Gas processing is found inmany crude oil drilling and processingoperations. For information on levelapplications for natural gas processing,see our Natural Gas Processingbrochure.
To disposalTo reservoir
Secondary Water Treatment
5
Coalescers
Flotation Units
Chemicals
7
Flow Applications:
6
8
Flow controls forpumps, compressors,and liquids are foundthroughout crude oilfield operations.
Water StreamLevel Applications
�
�
Level Applications:
8
7
� Flow Alarm:Thermatel®Model TD2ThermalDispersionFlow Switch
� Continuous Gas Flow:Thermatel®Model TA2ThermalDispersionMass FlowTransmitter
Vapor Recovery9
NOTE: The actual nature and number of stepsin crude oil processing most often dependsupon the source and makeup of the wellheadproduction stream. In some cases, several ofthe steps shown in the schematic below maybe integrated into one unit or operation, per-formed in a different order or at alternativelocations, or not required at all.
Natural Gas
Water
�� Water
�
2
PRODUCTION FLUID STORAGE1IN
ST
RU
ME
NT
AT
ION
CHEMICAL INJECTION2
INS
TR
UM
EN
TA
TIO
N
Application: Chemical agents employed in crude process-ing include drilling fluid additives, methanol injection forfreeze protection, glycol injection for hydrate inhibition,produced water treatment chemicals, foam and corrosioninhibitors, de-emulsifiers, desalting chemicals, and dragreduction agents. Chemicals are frequently administered byway of chemical injection skids.
Challenges: Level monitoring controls chemical inventoryand determines when the tanks require filling. The carefulselection and application of level controls to chemical injectionsystems can effectively protect against tanks running out ofchemicals or overfilling.
Chemical Injection Skid
Application: A variety of chemicals are typically stored inthe field or processing facility to expedite processing timeby preconditioning an inlet fluid. These fluids may first enterinto a hold tank to allow upstream solids and liquids time toseparate prior to production, which allows the facility tobetter handle upset conditions without stopping production.Stored additive chemicals include dispersants, flocculants,surfactants, glycols, diluents and rust inhibitors.
Challenges: Fluids are typically stored in a series of out-door steel tanks. The tank fluid volume should be continu-ously monitored since level variations may lead to upsets.Tanks contain agitated media with suspended solids thatcan coat floats, displacers and probes.
� Continuous Leveland Interface Level:Eclipse® Model 705 GWRTransmitter with EnlargedCoaxial Probe; or Pulsar™
or R82 Non-contacting,Pulse Burst RadarTransmitters
� Point Level:Echotel® Model 961Ultrasonic Switch;THERMATEL ModelTD1/TD2 Switch;Tuffy® II Float-actuated Switch
� Continuous Level:ECLIPSE Model 705Guided Wave RadarTransmitter; or Jupiter®
MagnetostrictiveLevel Transmitter
� Visual Indication:Atlas™ or Aurora®
Magnetic LevelIndicators can besupplied withswitches ortransmitters
Storage Tanks
3
� Point Level:Thermatel® Model TD1/TD2Thermal Dispersion Switch;or Model A15 SeriesDisplacer-ActuatedLevel Switch
WELLSTREAM SEPARATORS3IN
ST
RU
ME
NT
AT
ION
Application: Separators are large drums designed toseparate wellstreams into their individual components.They are commonly designed to separate two-phase(gas/liquid) or three-phase (gas/crude/water) wellstreams.Separators are also classified according to horizontal orvertical configuration (see below), operating pressure,turbulent or laminar flow, and test or production separation.
Challenges: Interface level measurement will actuate avalve to adjust vessel level. An emulsion layer along theoil/water interface can contaminate the oil with water orthe water with oil. Foaming along the gas/liquid interface,if entrained, can cause liquid carryover or gas blowby.
Oil Field Separator
� Point Level:Series 3 Float-actuatedExternal Cage LevelSwitch; THERMATELModel TD1/TD2Switch; Model A15Series Displacer-Actuated Level Switch
� Continuous Leveland Interface Level:ECLIPSE Model 705;JUPITER Magneto-strictive LevelTransmitter;or E3 Modulevel®
Displacer Transmitter
� Visual Indication:ATLAS or AURORAMagnetic LevelIndicators canbe supplied withswitches ortransmitters
Vertical (right): Vertical separators can accommodate large surges ofliquids. They are well suited for high sediment loads; conical bottoms aresometimes attached for large volumes of sediment. Vertical separatorsare preferred when wellstreams have large liquid-to-gas ratios. Theseseparators occupy less floor space than horizontal types and are oftenfound on offshore platforms where floor space is at a premium.
Horizontal (below): These separators are well suited for three-phaseseparation because of their large interfacial area between the two liquidphases. Horizontal types are preferred when wellstreams have high gas-to-oil ratios, when wellstream flow is more or less constant, and whenliquid surges are insignificant. These separators also have a muchgreater gas/liquid interface area, which aids in the release of solution gasand in the reduction of foaming.
TWO PRINCIPAL TYPES OF SEPARATORS
NATURAL GAS
WATER
GAS OUT
OIL OUTWATER OUT
OILEMULSION
GAS OUT
OIL OUT
NATURAL GAS
WATER
WATEROUT
OIL
EMULSION
WELLSTREAMIN
VERTICALHORIZONTAL
� Flow Indication:ALARM:THERMATELModel TD1/TD2Flow Switch;CONTINUOUS:THERMATELModel TA2 MassFlow Meter
WELLSTREAMIN
4
CRUDE DEHYDRATION4IN
ST
RU
ME
NT
AT
ION
CRUDE DESALTING5
INS
TR
UM
EN
TA
TIO
N
Application: Not all water is removed from crude oil duringthe first stage of gravity separation. Separated crude maycontain up to 15% water which exists in an emulsified formthat is difficult for a separator to remove. The oil and wateremulsion must be broken down so that the water can beremoved before the crude is shipped. De-emulsificationprocesses are accomplished using chemical agents suchas glycol and heat.
Challenges: Level control is found on two-phase andthree-phase water knockout drums, heater treaters andchemelectric dehydrators. Interface measurement is criticalin dehydration as it keeps the water-emulsified oil fromflowing over the separator weir.
Knock-out Drum
� Point Level:Series 3 Float-Actuated ExternalCage LevelSwitch
� Continuous Leveland Interface Level:ECLIPSE Model 705Guided Wave RadarTransmitter; or E3MODULEVELDisplacer Transmitter
� Visual Indication:ATLAS or AURORAMagnetic LevelIndicators can besupplied with switchesor transmitters
Application: Salt in the crude stream presents serious cor-rosion and scaling problems, and must be removed. Salt isdissolved within the remnant brine of the crude oil.Desalting removes both salt and the residual free water.Field desalting is necessary due to pipeline requirements.
Challenges: Level instrumentation is integral to single andtwo-stage desalting systems, multiple orifice plate mixers,and the settler tank of a chemical desalter. Interface levelcontrol keeps free water from hitting the desalter electrodesand prevents expensive damage. The interface level shouldbe kept constant, otherwise electrical field changes will dis-turb electrical coalescence.
Two-stage Desalter
� Point Level:Series 3 Float-actuated ExternalCage Level Switch;THERMATELModel TD1/TD2Level Switch
� Continuous Level:ECLIPSE Model 705Transmitter withEnlarged Coaxial probe;or E3 MODULEVELDisplacer Transmitter
� Visual Indication:ATLAS or AURORAMagnetic LevelIndicators can besupplied with switchesor transmitters
5
CRUDE DEGASSING6IN
ST
RU
ME
NT
AT
ION
WATER PROCESSING7
INS
TR
UM
EN
TA
TIO
N
Application: By removing dissolved gases and hydrogensulfide, crude stabilization and sweetening processesdiminish safety and corrosion problems. Gases areremoved by a stabilizer. Sweetening employs stabilizationor vaporization processes along with a gas or steam-basedstripping agent.
Challenges: Removing dissolved gases by stabilizationrequires level control in the reboiler unit. Sweetening bystage vaporization and trayed stabilization require levelcontrol in a series of staged separators. Sweetening byreboiled trayed stabilization requires additional level controlin a reboiler.
Reboiler
� Continuous Level:E3 MODULEVELDisplacer Transmitter; orECLIPSE Model 705Guided Wave RadarTransmitter
� Visual Indication:ATLAS or AURORA MLIscan be supplied withswitches or transmitters
� Point Level:Series 3 Float-Actuated ExternalCage Level Switch;or TUFFY II Float-actuated Switch
Application: Produced water, wash-down water orcollected rainwater require treatment whether they’rereused for reservoir flooding or simply disposed of. Watercollected from process operations contains hydrocarbonconcentrations too high for safe discharge. Suspendedhydrocarbon droplets in water also hinders well-injection.
Challenges: Treatment equipment is similar to three-phase separators except that water is the main product.Level control is found on skim tanks, precipitators,coalescers, flotation units, and collection tanks andsumps. Interface level measurement is essential for properdraining of clean water and removal of the residual oil.
Water Wash Tank
� Point Level:ECHOTEL Model961 UltrasonicGap Switch;Series 3 Float-ActuatedExternal CageLevel Switch
� Continuous Level:ECLIPSE Model 705;or Kotron® Model 805Smart RF Transmitter;or E3 MODULEVELDisplacer Transmitter
� Visual Indication:ATLAS Magnetic LevelIndicator can besupplied with switchesor transmitters
6
PROCESS & STORAGE TANKS8IN
ST
RU
ME
NT
AT
ION
VAPOR RECOVERY UNIT FLASH DRUM9
INS
TR
UM
EN
TA
TIO
N
Application: Crude oil and water are stored in oil fields.Unlike midstream tank farms at terminals and refineries,field storage consists of smaller vessels associated with oiland water processing. Diesel generator fuel, potable water,and fire water are also stored.
Challenges: Tank level monitoring can be provided withoverflow control and alarm systems or shutdown pumpswhen level falls below the specified low level. Interface con-trols will sense the beginning of an oil/water interface duringtank dewatering and control the water draw-off.
API 2350: New recommended practices regarding tank overfillprotection for above-ground storage tanks that receive Class I(flammable) liquids outline that careful selection and applicationof level controls can effectively protect against tank overfills.
Storage Tanks
� Point Level:Model A15 SeriesLevel Switch withoptional Proof-er®
Ground Check; orTUFFY II Float-Actuated Switch
� Continuous Level:ECLIPSE Model 705 Transmitterwith Flexible Probe; PULSARModel RX5 Non-Contacting,Pulse Burst Radar Transmitters;or E3 MODULEVEL DisplacerLevel Transmitter
Application: If allowed to escape into the atmosphere,hydrocarbon vapors diminish income through loss of hydro-carbon volume and create fire hazards and pollution prob-lems. A Vapor Recovery Unit (VRU) collects vapors fromstorage and loading facilities, reliquefies the vapors andreturns the liquid hydrocarbons back to storage.Methods to recover vapors include absorption, condensa-tion, adsorption and simple cooling.
Challenges: A VRU is a simple, economical process unitthat provides EPA compliance and improves operatingeconomies by capturing up to 95% of fugitive emissions.Critical to the VRU is the flash drum where vapors are reliq-uefied. Liquid level control of the flash drum is essential.
Field VRU
� Continuous Level:ECLIPSEModel 705Guided Wave RadarTransmitter;E3 MODULEVELDisplacerTransmitter
� Visual Indication:ATLAS or AURORAMagnetic LevelIndicators can besupplied withswitches ortransmitters
� Point Level:Series 3 Float-Actuated ExternalCage Level Switch;or TUFFY II Float-actuated Switch; orECHOTEL 961 Switch
� Flow Indication:CONTINUOUS:THERMATELModel TA2Mass Flow Meter
7
CORPORATE HEADQUARTERS5300 Belmont Road • Downers Grove, Illinois 60515-4499 USA
Phone: 630-969-4000 • Fax: 630-969-9489magnetrol.com • info@magnetrol.com
EUROPEAN HEADQUARTERSHeikensstraat 6 • 9240 Zele, Belgium
Phone: 052 45.11.11 • Fax: 052 45.09.93
BRAZIL: Av. Dr. Mauro Lindemberg Monteiro, 185, Quadrante 16 • CEP 06278-010 • Osasco • São Paulo
CANADA: 145 Jardin Drive, Units 1 & 2 • Concord, Ontario L4K 1X7
CHINA: Plant 6, No. 191, Huajin Road • Minhang District • Shanghai 201109
DEUTSCHLAND: Alte Ziegelei 2–4 • D-51491 Overath
DUBAI: DAFZA Office 5EA 722, P.O. Box 293671 • Dubai, United Arab Emirates
INDIA: C-20 Community Centre • Janakpuri, New Delhi 110 058
ITALIA: Via Arese, 12 • 20159 Milano
SINGAPORE: 33 Ubi Avenue 3 • #05-10 Vertex • Singapore 408868
UNITED KINGDOM: Regent Business Centre • Jubilee Road • Burgess Hill, West Sussex RH15 9TL
Magnetrol & Magnetrol logotype, Aurora, Echotel, Eclipse, Jupiter, Kotron, Modulevel,
Proof-er, Pulsar, Thermatel, and Tuffy are registered trademarks of Magnetrol International, Incorporated.
Copyright © 2011 Magnetrol International, Incorporated. All rights reserved. Printed in the USA.
Bulletin: 41-186.0 • Effective: April 2011
AN INDUSTRY GUIDE TO LEVEL MEASUREMENT AND CONTROL FROM MAGNETROL
Other industry and special application brochures from MAGNETROL include:
• Chemical• Flue Gas Desulfurization• Food & Beverage• Interface Level Measurement• Life Science• Mass Flow Measurement• Modular Skid Systems• Natural Gas Processing• Nuclear Power
• Petroleum Refining• Power Generation• Pulp & Paper Mills• Renewable Energy• Steam Generation• Tank Bridle Level Measurement• Tank Overfill Prevention• Understanding Safety Integrity Level (SIL)• Water & Wastewater
PLEASE NOTE: The instruments recommended in these brochures are based on field experience withsimilar applications and are included as a general guide to level and flow control selection. Becauseall applications differ, however, customers should determine suitability for their own purposes.
Recommended