View
222
Download
0
Category
Preview:
Citation preview
AAE450 Spring 2009
OTV 3-D GEOMETRY & INTEGRATION
Korey LeMondSTRC/THM/INTEG/CAD GL,Locomotion Phase
OTV Phase
[Korey LeMond] [STRC/THM/INTEG/CAD GL,
Locomotion Phase, OTV Phase] 1
AAE450 Spring 2009
Solar Deployment Arm
Reaction Wheels
Power Shunt Unit
Xe Tank
Thruster
Power Processing Unit
Longitudinal Stiffeners
Ribs
Shear Paneling
[Korey LeMond] [STRC/THM/INTEG/CAD GL,
Locomotion Phase] 2
AAE450 Spring 2009
COM Offset Components
x y z Mass (lb) Material
-6.9 cm -5.8 cm 113.7 cm Solar Array 16.43 Mg (Frame)
Thruster 11.32 Al
Moments of Inertia (kgm^2) Prop Tank + Prop 110 Al
Ixx Iyy Izz Reaction Wheels 0.304 Mg
541.68 544.5 550.01 Shear Panel 403 Mg
Ixy Iyz Ixz Ribs 43.48 Mg
15.07 -3.4 -3.36 Longitudinal Stiffener 60 Mg
Mass Total: 670 lb (303 kg)
Power Shunt Unit 7.04 Mg
Power Processing Unit 14.9 Mg
[Korey LeMond] [STRC/THM/INTEG/CAD GL,
Locomotion Phase] 3
AAE450 Spring 2009
Solar Deployment Arm
Power Feed to Motor and Return Line from Array to Power Shunt
Mounting Unit to Frame (Under Construction)
Work to be done: Determine appropriate interface to allow rotation and therefore deployment of array
[Korey LeMond] [STRC/THM/INTEG/CAD GL,
Locomotion Phase] 4
AAE450 Spring 2009
Fully encased reaction wheel, interior under construction
Power feed line to Power Shunt
Unit
Reaction Wheel Casing
[Korey LeMond] [STRC/THM/INTEG/CAD GL,
Locomotion Phase] 5
AAE450 Spring 2009
Power Shunt Unit
Feed line from solar arrays
Reaction wheel feed lines
Power Processing Unit
feed line
[Korey LeMond] [STRC/THM/INTEG/CAD GL,
Locomotion Phase] 6
AAE450 Spring 2009
Power Processing Unit
Power feed line to thruster
Power feed line to mass flow control valve
Power feed line to Power Shunt
Unit
[Korey LeMond] [STRC/THM/INTEG/CAD GL,
Locomotion Phase] 7
AAE450 Spring 2009
Thruster
Propellant feed line
Power feed line to Power Processing
Unit
[Korey LeMond] [STRC/THM/INTEG/CAD GL,
Locomotion Phase] 8
AAE450 Spring 2009
Propellant Tank
Propellant Feed line to Thruster
Mass Flow Control Valve
Power Feed line to mass control valve
from Power Processing Unit
[Korey LeMond] [STRC/THM/INTEG/CAD GL,
Locomotion Phase] 9
AAE450 Spring 2009[Korey LeMond]
[STRC/THM/INTEG/CAD GL,Locomotion Phase]
Cutaway of Prop System
10
AAE450 Spring 2009[Korey LeMond]
[STRC/THM/INTEG/CAD GL,Locomotion Phase]
View of Reaction wheels and feed lines to Power
Shunt Unit
11
Recommended