View
1
Download
0
Category
Preview:
Citation preview
I N T E R N AT I O N A L C ATA L O G U E
Established in 1999, MCC 4X4 has been a major 4WD equipment manufacturer and distributor for over a decade. MCC’s 4WD products are renowned, loved and operated by 4WD enthusiasts globally.
MCC offers a comprehensive range of accessories and equipment to suit almost every 4x4 vehicle. Our wide product range offers customers the choice of accessories such as Bull Bars, Nudge bars, Rear Bars, Wheel Carriers, Side Steps and Rails, Roof Racks, Draws System, Recovery Kits, camping gear and etcetera.
MCC’s experience and technical expertise in manufacturing 4WD accessories enables us to supply our customers with a wide variety of products which will improve the vehicle’s appearance, perfor-mance and functionality.
ABOUT MCC4X4Since we have manufactured and distributed our products both locally and overseas, we therefore understand the varying requirements toward 4WD equipment. To be accepted by worldwide customers, MCC endeavours to continue development of new innovative products which are of superior quality and design and will ultimately enhance the 4WD’s performance. We love our four wheel-driving just like you do, so we strive to make the most out of it by providing our customers with the finest quality 4WD equipment.
At MCC we believe in offering our customers the widest possible range of products and assisting them to make tailored decisions for their vehicle’s specific requirements. So you can rest assured in the confidence that you have got everything you need from our factory. We can guarantee that you will be left satisfied from the experience of purchasing directly from MCC and possess total confidence in our products; everything we manufacture has been thoroughly tested and proven under the most extreme of condi-tions. We also provide nationwide warranty support as part of our dedicated customer service mandate.
MCC Industrial New has set up their Australia national office, showrooms and warehouse,
“MCC 4X4 ACCESSORIES PTY LTD” To assist distributors and retail customers with pre and after sales back up, advise and spare parts. It also allows MCC manufacturing to have direct contact with Australian 4x4 workshops and 4x4 enthusiasts. So we can meet the requirements of Australian 4x4 owners, and develop new products for 4x4 vehicles, enable us to handle Australians always changing landscape and demanding on and off road conditions.
For the past 30 years MCC have been manufacturing and supplying automotive components worldwide. We have been producing bull bars and 4x4 accessories for the over decades for an array of 4WD com-panies in Australia and exporting to over 30 other countries. While not always being under the MCC name, out bars have seen it all, from the High country to the Kimberly and some amazing trip to the Cape. Through scrub, sand and mud out bars have the safety and quality that Australian’s demand.
MCC4X4 ACCESSORIES PTY LTDTHOMASTOWN, AUSTRALIA
We proudly manufacture our products in Thailand in our solely owned manufacturing facility, to the highest quality assurance
the world has to offer. As you may not be aware the majority of 4wd vehicles are manufactured in Thailand, this gives our factory direct access to vehicle for development of new and innovative 4x4 products for the Australian and world markets. We can guarantee the quality and durability of our products, due to the fact that our modern manu-facturing plant and skilled technicians are among the best within the
automotive production and manufacturing industry.Safety is our number one priority; let’s face it, why wouldn’t it be. Our bars are independently tested to ensure they are ADR compliant and Airbag compatible. It is this vigorous testing that makes our bars per-fect for the outback and city streets of Australia. We have been in the industry for many years and look forward to serving you for decades to come.
CONTENTSMCC 4X4 ACCESSORIES
MCC BULL BARS2 Rocker bars4 Phoenix bars5 Falcon bars6 Classic bars
7 Nudge bars
REAR PROTECTION8 Rocker rear bars9 Jack rear bars10 Rear bars with wheel carrier11 Rear bars with jerry can holder
12 ROLL BARS
13 SIDE PROTECTION Side steps & Side rails
14 ROOF RACKS
16 ROOFTOP TENTS Annex awning
17 DRAWS SYSTEM
18 RECOVERY GEARS
20 LIST OF AVAILABLE MODEL
33 WARRANTY
A Modern fog light design with unique frame insert which incorporates large fog lights and round park and flasher lamp
B Every bar incorporates two CB aerial brakets, welded to the top cross tube. For easy aerial installation
C Winch compatible is standard across the range. Separate winch beds have also been designed to spread winching loads evenly over the vehicle chassis, ensuring the bull bar functions properly in extream circumstances. Winch bed’s available for most models
D Mcc bull bars incorporates Hi-lift jacking points neatly positioned in the center pan sections
E Winch access holes located on top of the center pan area
F Each bull bar upright is cut from a single piece of quality high grade steel that extends from the top tube through the bumper section and forms the mounting plate to the bracket. This ensures the whole outer frame receives the maximum possible support
G Polyurethane overrider for light impact protection
H MCC’s mounting systems are designed to spread impact, ADR approved and air bag compliant.
I The split air pan system - ensures the radiator receives greater airflow and further increases the strength of the bar.
J MCC logo - guarantee of high quality and unique design. All MCC products have been designed using the latest CAD/CAM, utilizing the most modern equip-ment, laser cutters, CNC benders, lathes, welders, and advanced powder coating centers.
FALCON BAR
MCC4X4 BULL BARSBeyond your expectation, it’s our design excellence
A
B
C
D
E
F
G
H
I
J
B
C
H
TOUGH AUSTRALIAN DESIGN
2 MCC 4X4 BULL BARS
MCC 4X4 BULL BARS
ROCKER BARSMCC 078
ADR approved for air bag and
winch compatible
Aerial mounts
Tow points
Hi-lift jacking points
Split air pan system
110 mm. fog lamps
Modern LED round park / Flasher lamps
* Note : Shackles are sold separately.
MCC 078-02 Rocker bar triple loops
** Pictures are for illustration purposes only, Rocker bar comes standard in sand black powder coated.
MCC 4X4 BULL BARS
PHOENIX BARSMCC 808
Premium Phoenix bar designed with LED fog lights / daytime
running lights. Standard model comes with Halogen fog lights.
ADR approved for airbag and winch compatible
Premium model are designed with airflow grill for better ventilation
Upgraded with heavy duty 62 mm diameter upper loop tube
for the ultimate protection
Unique and smooth design for modern look
LED parker / indicator lights
Four aerial mounts and driving lights mounts
Larger over rider protection
Dual hi-lift jacking points
High quality materials, 3 mm thick steel plates
Standard bars finished in black powder coat.
4 MCC 4X4 BULL BARS
MCC 808-02 Steel A - frame
PHOENIX 808-01 PHOENIX 808-02 PHOENIX 808-02
MCC 4X4 BULL BARS
FALCON BARSMCC 707
ADR approved for air bag and winch compatible
125 mm. fog lights
LED paker and indicator lights
Classic Falcon bar with no fog light also available
Dual aerial mounts
Dual hi-lift jacking points
Driving lights mounts
Over rider protection
High quality materials, 3 mm. thick steel plate
Standard bars finished in black powder coat
MCC 707-02 Steel A - frame
PHOENIX 808-02 FALCON 707-02 AL FALCON 707-01 FALCON 707-01
MCC 4X4 BULL BARS
CLASSIC BARSMCC 004
ADR approved for air bag & winch compatible
Dual aerial mounts
Dual hi-lift jacking points
Driving lights mounts
LED parker and indicator lights
Over rider protection
High quality materials with 3 mm thick steel plates
Standard bars finished in black powder coat
Optional under protection platets available for most models
* Optional 110 mm. fog lamp kits available
6 MCC 4X4 BULL BARS
MCC004-02 Classic bar with optional fog lamp kits
CLASSIC 004-02 CLASSIC 004-02 CLASSIC 004-02
MCC 4X4 BULL BARS
CLASSIC BARSMCC 004
MCC 4X4 ACCESSORIES
NUDGE BARSMCC 009 (H/L)
High quality polished 304 grade stainless steel
Mirror polished
1.5 mm. thickness
Aerial or spot lights mounts
Light weight and strong
ADR compliant and air bag compatible
Available for High/Low nudge bars
CLASSIC 004-02 NUDGE BAR 009L NUDGE BAR 009H
MCC 4X4 REAR PROTECTION
ROCKER REAR BAR Tough Australian design
Rear step with ADR rated tow bar
Two LED number plate lights
Two recevery points
Hi-lift jacking points
Reverse and flasher lamps
Available in high quality sand black powder coated finish
* Note : Bow shackles are sold separately
8 MCC 4X4 REAR BARS
ARD rated and approved tow bar
MCC022-01
MCC 022-01 MCC 022-01
MCC 4X4 REAR PROTECTION
JACK BAR Tough Australian design
Rear step with ADR rated tow bar
Tough rear and side panel protection
Two LED number plate lights
Hi-lift jacking point
High quality black powder coated finish
Two recovery points (Bow shackles are sold
separately)
Premuim Jack Bar : MCC 022-03
Optional add-on features.
- Aluminium step plate
- Reverse lamps
- Park & flasher lamps
MCC022-03
MCC 022-03 MCC 022-03
MCC 4X4 REAR PROTECTION
REAR CARRIERMCC 022-02 bar available in multiple combinations
S ingle wheel carrier
D ual wheel carrier
S ingle jerry can holder / single wheel carrier
D ouble jerry can holder / single wheel carrier
10 MCC 4X4 REAR CARRIER
NOTE : Tow Bar pack for Pick up range 022-02, will be required when fitting the bar as original tow bar has to be removed. If customer wishes to retain a tow bar, SUV’s original tow bar should be able to remain, no additional tow bar packs available for SUV’s.
MCC 022-02 : Dual wheel carrier
MCC 4X4 REAR PROTECTION
MCC 022-02 WHEEL&JERRY CAN HOLDER
A MCC 4x4 carriers can be ordered to suit your need. A standard carrier comes with a single wheel carrier and a jerry can holder. Dual wheel or double jerry can are optional.
B Modern LED light
C Jacking point, two at the rear and another two on the side for easy jack access without removing wheels from carrier.
D Strong stub axles, bearing and arms which can accommodate 35” tyres. (35” tyres side by side is dependent on vehicle)
E Supplied with bearing stub axle rubber covers for added good looks when arms removed.
F User friendly latch mechanism with safety locking pin.
G Self locking pin to hold arms open for easier access to the back of your vehicle.
H Rated and ADR approved tow bar packs available for pick-up / utilities.
I Pre drilled reversing sensor mounts. Rubber caps provided when not in use.
J All models have a quality powder coated finish and aluminium checker plate non slip step.
K The MCC logo, the guarantee of high quality and uniquely designed products. All MCC4x4 Products are manufactured using the lastest CAD/CAM technology. We are also utilize the most modern equipment and machinery during the manufacturing process.
MCC 4X4 ACCESSORIES
ROLL BAR AND SIDE PROTECTION
12 MCC 4X4 ROLL BAR & SIDE PROTECTION
MCC SWING ROLL BAR 032-05
MCC SWING ROLL BAR
Choice of high quality polished 304 grade stainless steel
or steel with black power coat finish
Aerial / spot light mounts
Thickness: 1.5 mm for stainless steel / 2.0 mm for steel
Commercial design
* Roof rack are sold separately.
MCC SIDE STEPS AND SIDE RAILS
Steel construction
Side and sill protection
Non slip aluminium checker plate steps
Side rails optional for panel protection
Removable end caps for side steps, allowing for addition
of optional side rails.
Black power coated finish
2 mm thickness / 50.8 mm diamater steel pipe
Noted: To be ADR compliant swivel clamp assembly must be fitted for side
airbag compatibility. For off road use only we also supply standards rail clamps.
Swivel kit
CLASSIC SPORT BAR 032-03
SIDE RAILS 030-09SR
SIDE RAILS 030-09SR
MCC 030-09MCC 030-09TWSR - PREMIUM DESIGN
MCC SWING ROLL BAR 032-05
MCC STANDARD RACK
Steel construction
Powder coated
Four wall design
Wheel carrier
Tie down points
Black powder coated finish
Sizes available :
150 x 125 cm.
185 x 125 cm.
220 x 125 cm.
MCC COMMERCIAL RACK
Steel construction
Powder coated
Commercial design
Wheel carrier
Tie down points
Black powder coated finish
Sizes available :
150 x 125 cm.
185 x 125 cm.
220 x 125 cm.
14 MCC 4X4 ROOF RACKS
Sizes available :
150 x 125 cm.
185 x 125 cm.
220 x 125 cm.
MCC ROOF TOP TENT RACK
Steel construction
Powder coated
Roof top tent design
Wheel carrier
Tie down points
Black powder coated finish
Sizes available :
150 x 125 cm.
185 x 125 cm.
220 x 125 cm.
New adjustable gutter mounting bracketsAvailable in :
12.5 - 16 cm.
20 - 23.5 cm.
Spare wheel mountingStandard on size 185 x 220 cm. only.
Cargo net hooksFor securing your items while traveling.
MCC 4X4 ACCESSORIES
ROOF RACKS
Quick & easy to set up, manufac-tured from high quality, 300 gsm poly / cotton ripstop canvas which is breathable
Weight approximately 65 kgs. Dimension : Open 1400 x 3100 x 1300mm / Closed 1450 x 1250 x 300 mm
Waterproof and mould resistant
Raised on aluminium rods and incorporates nylon flysheet.
Also comes with a sturdy, aluminium retractable ladder; 205cm long
Comfortable 50mm high density foam mattress with removable cover 240 cm x140cm / 900 gsm UV stablilised laminated PVC
Incorporates a pull out veranda and zip on annex
Insect screened windows and doors
Bungee cord system to assist with closing
Insulated aluminium formed and clad base reduces weight and helps prevent cold seeping through the floor
Enhanced mounting system – no need to drill into roof rack or bars which simple to install and remove when not in use
Comes complete with mounting hardware, wrenches, ladder, travel cover and comprehensive instructions
Aluminium filled with polyurethane
Double stitched seams edged with binding
3 mm stainless steel hinges and 4 mm electro galvanised spring steel flysheet poles
Heavy duty, UV stabilised PVC travel cover with welded seams for complete waterproofing
Travel cover tie down straps to minimize ballooning
16 MCC 4X4 ROOFTOP TENT & DRAWER SYSTEM
MCC 4X4 ACCESSORIES
ROOFTOP TENT
MCC 4X4 ACCESSORIES
DRAWER SYSTEMS
SMALL
LARGE
MCC FRIDGE SLIDE
High quality made fridge slide Strong design Black powder coated Heavy duty rollers High quality steel components Locks into place when full open Comes with mounting bolts Has two heavy tie down points front and back Easy to use release mechanism on the front
SMALL : Suite fridge up to 635 x 390 mm Outside diameter 660 x 460 x 60mm Inside diameter 635 x 390 x 40mm Full extended length from 660 to 1230mm
LARGE : Suite fridge upto 850 x 510 mm Outside diameter 870 x 580 x 60mm Inside diameter 850 x 510 x 40mm Full extended length from 870 to 1490mm
MCC 044-02 1.5 Galvanised steel frame construction
Stainless handle with lockable
and safe storage system
100 kgs. rating per drawer set
Over 90 bearing used in construction
Heavy duty marine grade carpet
Fridge slide are sold separately
Heavy duty solenoid
Remote control
Snatch block 4 ton
Damper blanket
Hawse fairlead
9500 Ibs.12000 Ibs.
SYNTHETIC ROPE WINCHES Heavy duty solenoid
Remote control
Snatch block 4 ton
Damper blanket
Roller 4way fairlead
9500 Ibs.12000 Ibs.
CABLE WINCHES
122 cm x 34 cm x 8 cm size
One set of 2 units
Carry bar
Folding shovel
AIR COMPRESSOR 90 AIR COMPRESSOR 160 SUBTRACTS Maximum working pressure 100 psi
Maximum flow rate 90 litres/mins,
Continuous use 40 minutes
Carry bag
Maximum working pressure 150 psi
Maximum flow rate 160 litres/mins
Continuous use 40 minutes
Carry bag
18 MCC 4X4 RECOVERY GEARS
Maximum 3 ton load
Simply to use. Ideal for 4WD, farm
use, lifting, pulling or winching
Comply with Australian safety
standards
Tested capacity 3000 kg
Lifting capacity 1050 kg
Available in 48” & 60” height
HI-LIFT JACKS
SUBTRACTS
Maximum 4 ton load
Complete kit including,
two protective mate
A pair works gloves
Carry bag
Simple to use without the
risk of damage to vehicle
9 m x 8000 Kg snatch strap
4 ton snatch block
2 x bow shackie 5/8”
Hitch receiver
Leather gloves
Carry bag
Land cruiser 200 series
Land cruiser 120 series
Land cruiser 100, 105
Land cruiser 90 series
Land cruiser 80 series
Land cruiser 70 series
Nissan GU Y60
Nissan GU Y61
Hilux Vigo
Mitsubishi triton
Nissan Navara
Ford Ranger
Isuzu D-Max
20 m x 5000 kg for winch extention
3 m x 12000 kg tree trunk protector
9 m x 8000 kg snatch
8 ton snatch block
2 x bow shackle 3/4”
1 x bow shackle 5/8”
4 ton snatch block
5 m x 8 mm high tensile chain
Leather glove
Heavy duty carry bag
SNOCKEL AIR JACKS RECOVERY KITS (LARGE) RECOVERY KIT (SMALL)
MCC 4X4 ACCESSORIES
RECOVERY GEARS
20 MCC 4X4 CATALOGUE
MCC ROCKER BAR : 078-02 Triple loops in black steel
MCC ROCKER BAR : 078-01 Optional single loop in stainless steel or black steel
MCC CLASSIC BAR : 004 - 02 Optional add on fog lamp kit 110 mm.
MCC ROCKER BAR : 078-01 MCC FALCON BAR : 707-01Optional single loop in stainless steel or black steel
Classic bar Falcon bar Rocker bar Phoenix bar
MCC FALCON BAR : 707-02Classic Falcon bar with no fog light
MCC PHOENIX BAR : 808-02Top model : Steel A - frame with LED fog lights
MCC PHOENIX BAR : 808-01Optional single loop in stainless steel or black steel
MCC PHOENIX BAR : 808-02Standard model : Steel A - frame
MCC PHOENIX BAR : 808-01Stainless steel triple loop
MCC FALCON BAR : 707-02Steel A - frame
MCC FALCON BAR : 707-01Stainless steel triple loops
LIST OF AVAILABLE FRONT PROTECTION ACCESSORIES
22 MCC 4X4 CATALOGUE
MCC REAR ROCKER BAR : 022-01Comes with ADR rated tow bar pack
MCC JACK REAR BAR : 022-03 OPTION : Non-slip aluminium step plate
Reverse lampsPark & flasher lamps
MCC REAR BAR : 022-02Dual wheel
MCC SPORT BAR : 032-03MCC SWING SPORT BAR : 032-05
OPTION : Color coated (Standard comes in steel black powder coated)
MCC SIDE STEPS Standard model : 030-09 (Non-twist tube) Premium model : 030-09TW (Twist tube)
MCC SIDE RAILS : 030-09SR
NOTE : ADR compliant swivel clamp assembly must be fitted for side airbag compatibility.
MCC NUDGE BAR : 009LLow nudge bar (high nudge bar optional (009H)
Standard
Premium
MCC REAR BAR : 022-02Rear bar only
MCC REAR BAR : 022-02Single wheel
MCC REAR BAR : 022-02Dual wheel
MCC REAR BAR : 022-02Single jerry can holder / single wheel
MCC REAR BAR : 022-02Double jerry can holder / single wheel
LIST OF AVAILABLE SIDE & REAR PROTECTION ACCESSORIES
24 MCC 4X4 LIST OF AVAILABLE MODELS
Table 1
MODELBULL BARS ALLOY
004-02 007-02 707-01 707-02 078-01/02 808-01/02 707-02 AL/ALW
Toyota Hilux 88-97 (LN105-106)
Toyota Hilux 97-04
Toyota Hilux 05-11
Toyota Hilux 2012 - 2015
Toyota Hilux 2015 ON
Toyota Surf (4 Runner)130
Toyota Surf (4 Runner) IFS. Coil Spring 185
Toyota Land cruiser 60 Series
Toyota Land cruiser 80 Series
Toyota Land cruiser 105 Live axle 98-02
Toyota Land cruiser 100 IFS 02-07
Toyota Land cruiser 200 2008 - 2015
Toyota Land cruiser 200 2016 ON
Toyota Land Prado 90 / 95
Toyota Land Prado 120
Toyota Land Prado 150
Toyota Land cruiser 75 / 78 / 79 1994 ON
Toyota Land cruiser 70 Series 2007 ON
Toyota Land cruiser 76 Series 2007 ON
Toyota FJ Cruiser 07 ON
Mitsubishi Triton L200 MK/ Challenger PA 98-06
Mitsubishi Triton 2006 ML
Mitsubishi Triton 2010-2015 MN/ Challenger PB 09 ON
Mitsubishi Triton 2015 Pajero Sport 2015 - ON
Mitsubishi Triton MQ 2015 - ON
Mitsubishi Pajero NA - NG 83-91
Mitsubishi Pajero NH - NL 92-99
1
MODELBULL BARS ALLOY
004-02 007-02 707-01 707-02 078-01/02 808-01/02 707-02 AL/ALW
Mitsubishi Pajero NM - NP 00-05
Mitsubishi Pajero NS - NW 2006 ON
Nissan Patrol GQ 88-97 Y60
Nissan Patrol GU 98-04 (Series 1-3) Y61
Nissan Patrol GU 05-ON (Series 4) Y61
Nissan Patrol GU 2010 ON Y61
Nissan Navara D22 Long Bed
Nissan Navara D40 05-10/ Pathfinder R51
Nissan Navara D40/11 Africa-Spain ST-X
Nissan Navara D40/11 ST-X 550, Pathfinder 550
Nissan Navara NP 300 2015 ON
Nissan Pathfinder R50
VW Amarok
Mazda Bravo 04-06
Mazda BT-50 (06-11)
Mazda BT-50 2012
Ford Courier PG 04-06
Ford Ranger PJ 07-09
Ford Ranger PK 09-11
Ford Ranger PX 2012 ON
Ford Ranger Mark II 2015 ON
Holden Colorado RC 2008
Holden Colorado RG 2012 ON
Holden Colorado 7 2012 ON
Holden Jackaroo U8 2000
Holden Colorado TF/KB 88-03
Holden Rodeo / D-Max 03-07 RA
2
MODELBULL BARS ALLOY
004-02 007-02 707-01 707-02 078-01/02 808-01/02 707-02 AL/ALW
Holden Rodeo / D-Max 08-11 RA7 ON
Isuzu D-Max 2012 - 2015 ON
Isuzu D-Max MU-X 2012 ON
Isuzu D-Max 2016 ON
Jeep Cherokee XJ 1994
Jeep Cherokee XJ 1999
Jeep Grand Cherokee WJ 1999 ON
Jeep Wrangler TJ 97-06 ** **
Jeep Wrangler JK 2007 ON ** **
Land Rover Discovery I
Land Rover Discovery II
Land Rover 90, 110, 130, Defender ** **
Great Wall V200 Pick-up
Great Wall V240 Pick-up 2011
JMC 2015 - ON
** Vehicle Specific Bar Style
NOTE :A) All bull bars are design to fit flared and non-flared vehicles.B) All 707-01 come with standard with triple loop. Single loop option sold separately. 808-01/02C) All bars are winch compatible, for Great Wall V200 Diesel If require winch, intercooler will require relocate.
3
26 MCC 4X4 LIST OF AVAILABLE MODELS
Table 1-1
MODELNUDGE BARS REAR BARS SPORT BARS
009 L 009 H 022-01 022-02 022-03 032-03 032-05
Toyota Hilux 88-97 (LN105-106)
Toyota Hilux 97-04
Toyota Hilux 05-11
Toyota Hilux 2012
Toyota Suft (4 Runner) IFS, Coil Spring
Toyota Land cruiser 60 Series
Toyota Land cruiser 80 Series
Toyota Land cruiser 105 Live axle 98-02
Toyota Land cruiser 100 IFS 02-07
Toyota Land cruiser 200
Toyota Land cruiser Prado 90 / 95
Toyota Land cruiser Prado 120
Toyota Land cruiser Prado 150
Toyota Land cruiser 75 / 78 / 79 1994 ON
Toyota Land cruiser 70 Series 2007 ON
Toyota Land cruiser 76 Series 2007 ON
Toyota Land Cruiser 79 Pick-up
Toyota FJ Cruiser 07 ON
Mitsubishi Triton L200 MK
Mitsubishi Triton 2006 - 2009 ML
Mitsubishi Triton 2010 - ON MN
Mitsubishi Pajero Sport 2015 ON
Mitsubishi Pajero NA - NG 83-91
Mitsubishi Pajero NH - NL 92-99
Mitsubishi Pajero NM - NP 00-05
Mitsubishi Pajero NS - NW 2006 ON
5
MODELBULL BARS ALLOY
004-02 007-02 707-01 707-02 078-01/02 808-01/02 707-02 AL/ALW
Holden Rodeo / D-Max 08-11 RA7 ON
Isuzu D-Max 2012 - 2015 ON
Isuzu D-Max MU-X 2012 ON
Isuzu D-Max 2016 ON
Jeep Cherokee XJ 1994
Jeep Cherokee XJ 1999
Jeep Grand Cherokee WJ 1999 ON
Jeep Wrangler TJ 97-06 ** **
Jeep Wrangler JK 2007 ON ** **
Land Rover Discovery I
Land Rover Discovery II
Land Rover 90, 110, 130, Defender ** **
Great Wall V200 Pick-up
Great Wall V240 Pick-up 2011
JMC 2015 - ON
** Vehicle Specific Bar Style
NOTE :A) All bull bars are design to fit flared and non-flared vehicles.B) All 707-01 come with standard with triple loop. Single loop option sold separately. 808-01/02C) All bars are winch compatible, for Great Wall V200 Diesel If require winch, intercooler will require relocate.
3
MODELNUDGE BARS REAR BARS SPORT BARS
009 L 009 H 022-01 022-02 022-03 032-03 032-05
Nissan Patrol GQ 88-97 Y60
Nissan Patrol GU 98-04 (Series 1-3) Y61
Nissan Patrol GU 05-ON (Series 4) Y61
Nissan Navara D22 Long Bed
Nissan Navara D40 05-10
Nissan Navara D40/11 Africa-Spain ST-X
Nissan Navara D40/11 ST-X 550
Nissan Navara NP 300 2015 - ON
Nissan Pathfinder R50
VW Amarok
Mazda Bravo 04-06
Mazda BT-50 (06-11)
Mazda BT-50 2012
Ford Courier PG 04-06
Ford Ranger PJ 07-09
Ford Ranger PK 09-11
Ford Ranger PX 2012 ON
Holden Colorado RC 2008
Holden Colorado RG 2012 ON
Holden Jackaroo U8 2000
Holden Colorado TF/KB 88-03
Holden Rodeo / D-Max 03-07 RA
Holden Rodeo / D-Max 08-11 RA7 ON
Isuzu D-Max 2012 - 2015
Jeep Cherokee XJ 1994
6
28 MCC 4X4 LIST OF AVAILABLE MODELS
MODELNUDGE BARS REAR BARS SPORT BARS
009 L 009 H 022-01 022-02 022-03 032-03 032-05
Jeep Cherokee XJ 1999
Jeep Grand Cherokee WJ 1999 ON
Jeep Wrangler TJ 97-06
Jeep Wrangler JK 2007 ON
Land Rover Discovery I
Land Rover Discovery II
Land Rover 90, 110, 130, Defender
Great Wall V200 Pick-up
Great Wall V240 Pick-up 2011
JMC
* This product is underdevelopment, please contact for availability.
7
MODELNUDGE BARS REAR BARS SPORT BARS
009 L 009 H 022-01 022-02 022-03 032-03 032-05
Nissan Patrol GQ 88-97 Y60
Nissan Patrol GU 98-04 (Series 1-3) Y61
Nissan Patrol GU 05-ON (Series 4) Y61
Nissan Navara D22 Long Bed
Nissan Navara D40 05-10
Nissan Navara D40/11 Africa-Spain ST-X
Nissan Navara D40/11 ST-X 550
Nissan Navara NP 300 2015 - ON
Nissan Pathfinder R50
VW Amarok
Mazda Bravo 04-06
Mazda BT-50 (06-11)
Mazda BT-50 2012
Ford Courier PG 04-06
Ford Ranger PJ 07-09
Ford Ranger PK 09-11
Ford Ranger PX 2012 ON
Holden Colorado RC 2008
Holden Colorado RG 2012 ON
Holden Jackaroo U8 2000
Holden Colorado TF/KB 88-03
Holden Rodeo / D-Max 03-07 RA
Holden Rodeo / D-Max 08-11 RA7 ON
Isuzu D-Max 2012 - 2015
Jeep Cherokee XJ 1994
6
MODEL
SIDE STEPS ROOF RACK DRAWER SYSTEMS
DOUBLE CAB031-05 044-01 044-02
030-09 030-09SR 030-09TW 030-09TWSR
Toyota Hilux 88-97 (LN105-106)
Toyota Hilux 97-04
Toyota Hilux 05-11
Toyota Hilux 2012 - 2015
Toyota Hilux 2015 ON
Toyota Suft (4 Runner) IFS, Coil Spring
Toyota Land cruiser 60 Series
Toyota Land cruiser 80 Series
Toyota Land cruiser 105 Live axle 98-02
Toyota Land cruiser 100 IFS 02-07
Toyota Land cruiser 200 2008 - 2015
9
MODEL
SIDE STEPS ROOF RACK DRAWER SYSTEMS
DOUBLE CAB031-05 044-01 044-02
030-09 030-09SR 030-09TW 030-09TWSR
Toyota Land cruiser 200 2015 ON
Toyota Land cruiser 200 2016 ON
Toyota Land Prado 90 / 95 * * * *
Toyota Land Prado 120
Toyota Land Prado 150
Toyota Land cruiser 75 / 78 / 79 1994 ON
Toyota Land cruiser 70 Series 2007 ON
Toyota Land cruiser 76 Series 2007 ON
Toyota FJ Cruiser 07 ON
Mitsubishi Triton L200 MK
Mitsubishi Triton 2006 ML
Mitsubishi Triton 2010 MN
Mitsubishi Triton MQ 2015 - ON
Mitsubishi Pajero NA - NG 83-91
Mitsubishi Pajero NH - NL 92-99
Mitsubishi Pajero NM - NP 00-05
Mitsubishi Pajero NS - NW 2006 ON
Nissan Patrol GQ 88-97 Y60
Nissan Patrol GU 98-04 (Series 1-3) Y61
Nissan Patrol GU 05-ON (Series 4) Y61
Nissan Navara D22 Long / Short Bed
Nissan Navara D40 05-10
Nissan Navara D40/11 Africa-Spain ST-X
Nissan Navara D40/11 ST-X 550
Nissan Navara NP 300 2015 - ON
10
30 MCC 4X4 LIST OF AVAILABLE MODELS
MODEL
SIDE STEPS ROOF RACK DRAWER SYSTEMS
DOUBLE CAB031-05 044-01 044-02
030-09 030-09SR 030-09TW 030-09TWSR
Nissan Pathfinder R50
VW Amarok
Mazda Bravo 04-06
Mazda BT-50 (06-11)
Mazda BT-50 2012
Ford Courier PG 04-06
Ford Ranger PJ 07-09
Ford Ranger PK 09-11
Ford Ranger PX 2012 ON
Ford Ranger Mark II 2015 ON
Holden Colorado RC 2008
Holden Colorado RG 2012 ON
Holden Jackaroo U8 2000
Holden Colorado TF/KB 88-03
Holden Rodeo / D-Max 03-07 RA
Holden Rodeo / D-Max 08-11 RA7 ON
Isuzu D-Max 2012
Isuzu D-Max 2016 - ON
Jeep Cherokee XJ 1994
Jeep Cherokee XJ 1999
Jeep Grand Cherokee WJ 1999 ON
Jeep Wrangler TJ 97-06
Jeep Wrangler JK 2007 ON
Land Rover Discovery I ** ** ** **
Land Rover Discovery II ** ** ** **
11
MODEL
SIDE STEPS ROOF RACK DRAWER SYSTEMS
DOUBLE CAB031-05 044-01 044-02
030-09 030-09SR 030-09TW 030-09TWSR
Toyota Land cruiser 200 2015 ON
Toyota Land cruiser 200 2016 ON
Toyota Land Prado 90 / 95 * * * *
Toyota Land Prado 120
Toyota Land Prado 150
Toyota Land cruiser 75 / 78 / 79 1994 ON
Toyota Land cruiser 70 Series 2007 ON
Toyota Land cruiser 76 Series 2007 ON
Toyota FJ Cruiser 07 ON
Mitsubishi Triton L200 MK
Mitsubishi Triton 2006 ML
Mitsubishi Triton 2010 MN
Mitsubishi Triton MQ 2015 - ON
Mitsubishi Pajero NA - NG 83-91
Mitsubishi Pajero NH - NL 92-99
Mitsubishi Pajero NM - NP 00-05
Mitsubishi Pajero NS - NW 2006 ON
Nissan Patrol GQ 88-97 Y60
Nissan Patrol GU 98-04 (Series 1-3) Y61
Nissan Patrol GU 05-ON (Series 4) Y61
Nissan Navara D22 Long / Short Bed
Nissan Navara D40 05-10
Nissan Navara D40/11 Africa-Spain ST-X
Nissan Navara D40/11 ST-X 550
Nissan Navara NP 300 2015 - ON
10
MODEL
SIDE STEPS ROOF RACK DRAWER SYSTEMS
DOUBLE CAB031-05 044-01 044-02
030-09 030-09SR 030-09TW 030-09TWSR
Land Rover 90, 110, 130, Defender ** ** ** ** **
Great Wall V200 Pick-up
Great Wall V240 Pick-up 2011
JMC 2015 - ON
* This product is underdevelopment, please contact for availability. ** Vehicle Specific Bar Style
NOTE :D) All side steps and rails design for vehicle with flared wheel arches,
E) Information contained in this catalogue is based on manufacturers’ specifications at the time of print. Changes to vehicles or products may occur after this time that may render a certain accessory unsuitable for a particular application.
F) Vehicle model dates contained in this catalogue are indicative, so please exercise caution when ordering accessories if your vehicle’s build date falls close to a model change date. If in doubt, please consult with our staff, who can assist with determining the correct product for a particular vehicle.
12
FOLLOW USFor more up to date products and events from us in social network.
www.facebook.com/MCC4X4accessories
@ MCC4X4
32 MCC 4X4 LIST OF AVAILABLE MODELS
B E Y O N D E X P E C TAT I O N
WARRANTYMCC 4x4 products come with 1 year warranty. MCC 4x4 warrants the original buyer, only when purchased new via authorized MCC 4x4 resellers and dis-tributors, from date of original retail sale.
Product is warranted against defects in material or workmanship that cause the product to perform below the specified limits set by MCC4x4, to the extent that MCC 4x4 will repair or replace any parts which are found to be defective.
All warranty claims must be submitted via original purchasing store or chain, unless otherwise arranged. Proof of original purchase must be presented upon request.
Products may require to be returned to MCC 4x4 for assessment or repair. Postage and removal costs involved are not the responsibility of MCC 4x4, and may only be considered upon discretion by MCC 4x4 in the event of such claim being verified.
The warrant does NOT apply where, 1) Acts of neglect or misuse are evident, 2) Product has been modified, 3) Vehicles which are modified or not the recommended vehicle of use, 4) Used in racing or competition conditions without the prior consent of MCC 4x4, 5) used beyond the expectations of the original vehicle manufacturer.
Before installation of any product, please ensure you have received the cor-rect parts for your application. Ordering of the correct parts is the responsibil-ity of the buyer. Return of a product in an un-used condition will attract a 20% restock fee, where MCC 4x4 is not at fault.
Return of used or soiled product, 1) outside warranty period, 2) without fault, will result in refusal of your claim and be returned at buyer’s expense.
Damage to products through fitment error is not covered under warranty.
FREIGHT CONDITIONS:Freight of all products is the buyer’s responsibility. Where MCC 4x4 have arranged freight, costs involved will be invoiced to the buyer.MCC 4x4 is not responsible for damage or loss during freight.
FITTING:Any prices quoted may be subject to fitting costs. The price of fitting is deter-mined by the individual fitting agent.
Recommended