Acoustic Analysis with Simpack and wave6 · Abaqus Explicit and ... Increased efficiency for NVH...

Acoustic Analysis with

Simpack and wave6

North American Multibody Simulation

User Meeting

Brad Heers, Phil Shorter

SOURCES

Why SIMULIA for noise and vibration simulation?

Simpackmultibody dynamics

accurate modeling of high frequency

content of powertrain sources

wave6vibro-acoustics and flow noise

full spectrum analysis methods

AbaqusExplicit and Implicit Finite Elements

Best-in-class solvers and materials

CSTelectromagnetics

accurate modeling of emag sources

in electric machines/vehicles

xflowunsteady CFD

accurate and fast modeling of

aerodynamic sources in flow noise

SIMULIA has best in class tools for

modeling both the sources and the

transmission of noise and vibration

Vibration (“Noise”) at the Vehicle Level� “1D” System Approach

� “FE Approach”

� “Multi-Body Approach”

Critical Assumptions in (Noise and) Vibration� “In-situ” conditions

� Sources (internal, external, etc.)

� Joints, bushings, etc

� Damping

� Accurately capturing system stiffness and mass

� “Substructures”, “FE-bodies”, “flex bodies”, etc.

� Scalability to large systems and frequency ranges

Traditional 1D Approach� “In-situ” conditions

� Damping

Traditional FE approach� “In-situ” conditions

� Damping

Traditional Multi-Body Approach� “In-situ” conditions

� Damping

Simpack’s Advantages over “Traditional” MBD…� Less numerical damping

� “Better damping”

�More accurate source paths through joints, etc.

� Powerful linearization and frequency response capabilities

�Allows “in-situ” with frequency-based responses

� Considerable investment in this approach over last two development cycles

� Large degree-of-freedom flexible bodies and integration into FE codes

� Including Abaqus

Simpack Approach (with integrated technologies)� “In-situ” conditions

� Damping

Large deformation – reduced

� Research project has been finished

� Project work to study

accuracy/efficiency

� Discover synergies with surrogate

modeling and machine learning to

increase robustness

� Release date: TBD

Flexbody: a variety of options (Abaqus-Simpack)

Small deformation

� Increased efficiency for NVH and acoustics

� Substructuring for fluid structure coupling in

Simpack

� Flex. body preparation on 3DX platform

Large deformation – detailed

� Co-simulation Simpack & Abaqus/XPL

� speed-up by factor 3

� Co-simulation Simpack & Abaqus/STD

� Generic Interface to couple any flex.

body physics with Simpack through a

flex. body user routine

Multi-scale 3D PhysicalLogical

Simpack linear reduced

Abaqus/Std

Simpack nonlin. reduced

Combining SIMULIA Products & Technologies

Powertrain Sources

Chassis sources and paths

AbaqusSubstructures used to generate

flexible bodies

Recovery matrices directly within

Simpack

Acoustic Analysis with

Simpack and wave6

North American Multibody Simulation

User Meeting

Brad Heers, Phil Shorter

SOURCES

CSTelectromagnetics

xflowunsteady CFD

SIMULIA has best in class tools for

modeling both the sources and the

transmission of noise and vibration

SOURCES

What is wave6?

CSTelectromagnetics

xflowunsteady CFD

we have released a new standalone product called “wave6” for accurate simulation of noise and vibration (including flow induced noise and vibration) across a broad frequency range

wave6 accurately models wave propagation in structures, fluids, foams

and fibers … across the audible frequency range (120 dB = 1e6)

wave6 : vibro-acoustic analysis methods

Low frequency (deterministic)

High frequency (statistical)

Statistical Energy Analysis (SEA) infinite acoustic

fluids

Finite Element (FE) structure

Finite Element (FE) acoustics

Boundary Element (BEM) and APML infinite acoustic

fluids

Statistical Energy Analysis (SEA)

structure

Statistical Energy Analysis (SEA)

cavities

Poroelastic (Foam) Finite Elements

Poroelastic (Foam) noise control treatments

Mid frequency (mixed)

wave6 contains all of the main vibro-acoustic methods in a single environment with a single license feature(a “power session” license is also available for solving on unlimited hardware)

Methods can be combined together in the same model for more accurate predictions

Example applications

Side mirror interior “wind noise” HVAC and muffler “shell noise”

Hydro-acoustics (“installation effects”) Exterior diffraction (“pass-by noise”)

Aero-vibro-acoustics (FE+BEM+SEA+CFD) Vibro-Acoustics (FE + BEM)

Vibro-Acoustics (BEM)Aero-Acoustics (FE + BEM + CFD)

Sound package design

Vibro-Acoustics (SEA)

Aircraft/launch vehicle interior noise

Vibro-Acoustics (SEA)

Aerodynamic side mirror interior “windnoise” : Daimler

Exterior (CFD)

Interior (wave6)

Experiment Drivers ear SPL (prediction vs. test)Simulation

A. Schell et al, “Flow Induced Interior Noise Prediction of a Passenger Car” Proc. SAE N&V 2017

Large fully coupled FE/BEM models: NASA and Lockheed Martin

I. Dandaroy “Analytical Tool for Numerically Simulating a Direct Field Acoustic Test” Proc. SCLV 2017

wave6 FE/BEM model

SOURCES

CSTelectromagnetics

xflowunsteady CFD

Simple example to demonstrate the

combined use of simpack and wave6

Example : noise from a rotating shaft

Rigid bearing

Force Z

Force Y

rpm Simpack

flexible bodies with modes

acoustic radiation using FE/BEM model

SPL(rpm, freq, xyz)

Mode shapes

Modal amplitudes

Automated workflow

SPL?Analysis process

Modal contributions to SPL (and SPL vs rpm/freq)

Frequency

Mode 4 : SPL@2kHzModes

Sound Pressure

Radiated acoustic

field at 10kHz

Summary• SIMULIA can help you model both the sources and transmission of N&V

• wave6 = next generation software for “full spectrum” vibro-acoustics

• includes automated “templated/pipelined” workflows

• Makes it easy to predict radiated sound from a SIMPACK model

• (you don’t have to be an acoustics expert to predict/diagnose SPL)

• Simple shaft example created to demonstrate the process

• Combines SIMPACK + ABAQUS + wave6

• Contact us for more information

Acoustic Analysis with Simpack and wave6 · Abaqus Explicit and ... Increased efficiency for NVH...

Documents

Wind and Drivetrain Conference 2012 - SIMPACK · Wind and Drivetrain Conference 2012 ... SIMPACK Wind and Drivetrain Conference 5 ... Calculating Markov matrix with Rainflow Counting

SIMPACK€¦ · The interface between SIMPACK and CATIA V5 has been upgraded to support CATIA V5R21. CATSIM is now able to directly create SIMPACK 9 models from

SIMPACK Use at Jordan Grand Prix

FFS H160 : AH SIMPACK DEVELOPMENT · Landing Gear sensors ... AH Simpack baseline . SSP H160 : AH strengths AH Simpack quality guaranteed by : Starting point for AH SSP is the simulation

Railway Dynamics Studies at CITEF with SIMPACK

Set up of an Automotive Test Rig in SIMPACK

SIMPACK usage in Automotive Industry

Acoustic Louvres · Page 4 Acoustic Louvres Overview 6 Acoustic Louvres Range 8 Features 10 Acoustic Louvre Installation 12 Acoustic Louvres Specifications 14-Noishield™ Acoustic

SIMPACK in Multidisciplinary Use: …. Einarsson / Institute of Aerodynamics and Flow Technology 1 SIMPACK in Multidisciplinary Use: Aerodynamics/Flight-Mechanics Coupling Gunnar Einarsson

1 Acoustic fundamentals Acoustic fundamentals

Passenger Air Vehicles Noise Requirements · ACOUSTIC PROPAGATION - Wave6 • Ffowcs Williams - Hawkings Model • Acoustic Finite Element Analysis • Statistical Energy Analysis

Fast SIMPACK WIND - German Pavilion · SIMPACK WIND Accurate • Fast • Robust • Versatile What is SIMPACK? SIMPACK is a general-purpose multi-body simulation (MBS) software tool

Electric Drive Noise & Vibration Analysis · Isight Tosca Simpoe fe-safe SFE Simpack 2015 CST XFlow Wave6 Exa. 6 OM s | 8 6. 7 OM s | 8 6 Inputs •Hardpoints •Requirements Outputs

Controller Design by SIMPACK/SIMAT/MATLAB ... · PDF fileController Design by SIMPACK/SIMAT/MATLAB: DisturbanceCompensationby aSteer-by-WireSystem ... Electromagnetic clutch ... weinfurter_simpack_user_meeting_en.ppt

El negocio de las redes sociales: Wave6

Design Calculation and Verification using SIMPACK Wheel/Rail€¦ · · 2009-03-30using SIMPACK Wheel/Rail ... uthe narrowest curve uRunning with maximum speed on straight track

SN-2012-Jul SIMPACK News Full-Issue Spreads LR

SIMPACK: MULTIBODY SIMULATION - Woelfel - Home · SIMPACK: MULTIBODY SIMULATION Create high quality products quickly and efficiently to reduce overall costs in design, production

Designing and Implementing an In-situ Emergency …prontointernational.org/wp-content/uploads/2016/05/160330-CUGH...SimPack 6 was the most commonly used SimPack (n=177) and SimPack

ALSTOM Transport Selects SIMPACK as Common · PDF fileALSTOM Transport Selects SIMPACK as Common Solution Along with Siemens Mobility and Bombardier Transportation, another global