View
276
Download
4
Category
Preview:
Citation preview
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated
Advantages of Implementing StormCAD for OpenRoads (SUDA)
Robert Garrett, Bentley Systems Inc.
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 2
What is Subsurface Utility Design and Analysis?
What is StormCAD for OpenRoads?
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 3
StormCAD 100 Inlets Included
Subsurface Utility Engineering
• Conflict
Management
• SUE Attribution
• Storm/Sanitary
Hydraulic
Analysis and
Design
• Hydrology
• 3D Modeling of
all underground
• Integrated with
OpenRoads
Subsurface Utility Design and Analysis
(SUDA)
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 5
Advantages: of 3D Utility Models
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 6
3D Utility Models
• FHWA Every Day Counts 2 - 3D modeling in transportation construction is a mature technology
that serves as the building block for the modern-day digital jobsite. The technology allows for
faster, more accurate and more efficient planning and construction.
• Every Day Counts 3 effort focuses on three practices: using the raw data from which the model
is created for roadway inventory and asset management purposes, incorporating schedule (4D)
and cost (5D) information into models, and using post-construction survey data to correct the
design model and create an accurate as-built record drawing
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 7
Constructability
A recent survey of DOT’s conducted by Dr. Ralph Ellis and Dr. Randolph
Thomas, as part of NCHRP 2-24(12), found that the top five causes of
construction delays were:
1. Utility Relocation Delays
2. Utility Delays due to differing site conditions
3. Permitting
4. Weather
5. Errors in Plans and Specifications
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 8
Constructability
• Virginia DOT credits SUE with helping to reduce the time needed to design
highways from 5 years to 4 years, a 20% reduction in time.
• Florida DOT analyzed the use of SUE on major projects in Tallahassee
and Miami and found that it saved $3 in contractor construction delay
claims for every $1 spent for subsurface utility engineering.
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 9
Advantage: Create 3D Models from Legacy
Sources
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 10
Build Hydraulic and 3D Models from Legacy Sources
• Direct Import from:
– StormCAD, CivilStorm, SewerCAD SewerGEMS (.stsw)
– SWMM V5
– LandXML
– MicroDrainage
– GEOPAK Drainage
– InRoads S&S
– MX Drainage
• Using Model Builder link/import from:
– Microsoft Excel
– Microsoft Access
– Text Files (.csv, .txt)
– ESRI (.shp)
– Bentley Map
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 19
Advantage: Automatic 3D Models While
Layout Networks
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 20
Layout Drainage Network
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 21
Modeling Storm and Sanitary Networks
• Inlets, headwalls and catch basins ruled to OpenRoads geometry and surfaces.
• Pipes ruled to the nodes.
• Multi-pipe profile runs
• Hydraulic properties linked into feature definitions.
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 22
Best Practices - Layout
• If you don’t know how to use Civil Accudraw, put it on your training list. It will make your life easier and OpenRoads more powerful
• When connecting pipes to headwalls, remember that the direction determines whether the headwall is an inlet or an outlet.
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 23
Catchments
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 24
Layout Catchments
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 27
Advantage: State of the Art Drainage Design
Calculations
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 28
Peak Flow Analysis and Design
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 29
Peak Flow Hydraulic Analysis/Design
• Included with OpenRoads - drainage networks up to 100 inlets.
• StormCAD GVF calculations engine.
• 3D Model updates with design changes.
• Includes latest HEC-22 methods.
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 30
Advantage: Scenario Manager
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 31
Scenario Manager
• Scenario Manager provides unlimited variation of design parameters with complete confidence that known good alternatives can be recalled at any time.
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 32
No Sumps Video
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 33
Advantage: Lateral Connections
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 34
Drainage Laterals
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 35
Drainage Laterals
• Flows thru the terminal inlet are computed and inlet can be designed.
• Flows from inlet are passed thru lateral pipe but lateral pipe is not designed.
• Lateral connects to trunk line but does not split in two.
• All lateral flows are accumulated and applied at upstream end of trunk.
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 36
Advantage Culverts
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 37
Culvert Design / Analysis
• Perform Culvert Analysis by flipping the “Is Culvert” switch in properties to True
• Define inlet coefficients on conduit or the end node
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 38
Video Culvert
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 39
Advantage: Advanced Hydraulic Calcs
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 40
Video SWMM
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 41
Activating Advanced Hydraulic Analysis Tools
• StormCAD functionality for up 100 Inlets included in OpenRoads.
• 100 inlet count applies per drainage design model. Split multiple networks across multiple models for longer projects.
• Activate higher level licenses from Tools Menu.
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 42
Higher Level License Highlights
• StormCAD Unlimited – Same functionality as base OpenRoads but unlimited inlet count.
• SewerCAD – Adds Convex compute engine
– Sewer Loading tools
– And more…
• CivilStorm – Adds Dynamic Wave and SWMM compute engines
– Pond Maker tool
– Compute Storage in network
– Low Impact Development structures (LIDs)
– And more…
• SewerGEMS – All the above and more, such as long term simulations
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 43
SWMM Analysis
• Using EPA SWMM analysis allows validation of a peak flow design
• Network is analyzed for the entire storm event, not just the peak flow.
• Available in CivilStorm and SewerGEMS
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 44
Pond Maker
• Detention Pond Analysis tool
• An aid in determining necessary storage requirements and analyzing adequacy of storage
• Composite Outlet Structures
• Includes Seepage
• Available with CivilStorm and SewerGEMS
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 45
Storage Chambers
• Included in CivilStorm and SewerGEMS
• Allows definition of standard storage chambers which can be defined in array and used in detention calculations.
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 46
Low Impact Development Controls
• Available in CivilStorm and SewerGEMS
• Bio-retention cells
• Green Roof
• Infiltration Trench
• Porous Pavement
• Rain Barrel
• Rain Garden
• Vegetative Swales
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 47
Load Builder
• Define sanitary sewer loads in a variety of methods.
• Available in SewerCAD and SewerGEMS
WWW.BENTLEY.COM I © 2015 Bentley Systems, Incorporated I 48
Questions?
Robert Garrett, Senior Product Engineer, Bentley Systems Inc.
Robert.Garrett@bentley.com
Recommended