Air Intake Filters Are Manufactured By: Air Solution and Newway Companies, Commerce Twp, MI 48382 ...

Air Intake Filters Are Manufactured By:Air Solution and Newway Companies, Commerce Twp, MI 48382

www.airsolutioncompany.comUnited States and Foreign Patents Granted - This product is protected under one or more of the following U.S. and foreign patents: 5,370,722 ● 5,529,593 ● 6,197,077 B1 ● 2170244 ● 95904185.6-2113, Other Patents Pending

Mountain Aire LLCColesville, MD

Delivering the Best in Air Intake Filtration Technology

The Product LineFilter Media

Fine Mesh FilterThis mesh is specifically designed to help alleviate problems associated with excessive dust. This is an electrostatic filter which will load faster then the

engineered HVAC Mesh.

Not recommended in cottonwood seed zones unless accompanied by excessive dust

Engineered HVAC Mesh FilterThis mesh is specifically engineered to stop debris which typically causes fouling of condenser coils, cooling towers and other HVAC systems. This

mesh is non-electrostatic and is constructed with a non-porous vinyl coated polyester.

Keeps Most Insects Out Of Your System

Engineered HVAC Mesh For Commercial & Industrial Grades

House FlyMosquitoGnat

Stops Airborne Debris Before It Fouls & Clogs HVAC and

Cooling Tower Systems

“This is the stuff that will plug your equipment”

Stops cottonwood seed and other airborne debris on the outside of the equipment where it is easy to see and clean

Stops Cottonwood SeedBefore It Can Cause Trouble

Amazingly Easy To Clean The Engineered HVAC Mesh Filters are constructed with bonded fibers and a non-porous vinyl

surface coating that helps prevent debris adhesion and entanglement thus making cleaning quick and easy – Cleans easier than removing lint from a cloth dryer lint catcher!

So easy you can remove it with your hand.

Broom or Brush

Garden Hose

Shop Vacuum

Even the rain will clean the filter

Air Intake Filter Applications

Rooftop Units Condenser Units Air Cooled Chillers Dry Coolers

Air Handling Units LouversCooling Towers

Air Intake Filters Are Manufactured By: Air Solution and Newway Companies, Commerce Twp, MI 48382 United States and Foreign Patents Granted - This product is protected under one or more of the following U.S. and foreign patents: 5,370,722 ● 5,529,593 ● 6,197,077 B1 ● 2170244 ● 95904185.6-2113, Other Patents Pending

Fastening Systems

Air Intake Filters Are Manufactured By: Air Solution and Newway Companies, Commerce Twp, MI 48382 United States and Foreign Patents Granted - This product is protected under one or more of the following U.S. and foreign patents: 5,370,722 ● 5,529,593 ● 6,197,077 B1 ● 2170244 ● 95904185.6-2113, Other Patents Pending

Grommets with Self-tapping Screws & Bonded Washers

Avail. On Fine Mesh and Commercial Grade HVAC Mesh with 1” Fiber

Reinforced Outer Binding

Nylon Turn Stud Fasteners

Avail. On Fine Mesh and Commercial Grade HVAC Mesh with 1” Fiber

Reinforced Outer Binding

Slide Mount System with Cable Mounting

Avail. Industrial Grade HVAC Mesh Only

Heavy Duty, Self-tapping Stud Adapter Fasteners

Avail. On Industrial Grade HVAC Mesh and Fine Mesh Filters with

2.25” Fiber Reinforce Outer Binding

Pulley Mount Filter with Cable and Pulley Operation

Avail with galvanized. storage unit, vinyl cover or Velcro bundle straps

Features Non-porous vinyl coated polyester media (Commercial & Industrial)

Specifically engineered for high volume / high velocity airflow with low static pressure impact – Less than 1/10” W.G. at 600 FPM

Low Air Friction Coefficient - Nearly Invisible to the airflow.

Bonded Fibers – Ensures uniform airflow, prevents entanglement of debris, prevents running or unraveling of fibers if punctured.

Extremely Strong & Durable

UV Resistant,

Low Debris Adhesion

Resists mold & mildew

Flame resistant (Self-extinguishing)

Multiple Fastening Options

Filter storage unit (*optional).

Sizes to fit every air intake opening.

2 year factory warranty on filter media. (Up to 15 year Service Life)

Advantages Air Intake Filters significantly change the dynamics of the maintenance process by

enabling the management of airborne debris on the outside of cooling towers and HVAC equipment where it is easily seen and removed, rather than contending with excessive maintenance and downtime associated with removing debris when it gets inside of the equipment.

Can Significantly Reduce Energy Cost – equipment runs efficiently.

Reduces Cleaning Effort Up To 75% - a few quick swipes of a broom, brush, shop vacuum or rinse with a garden hose – Even rain washes filters.

Eliminates / Significantly Reduces Power Washing.

Environmentally Friendly – Reusable Filters Reduce / eliminates coil cleaning solvents, helps reduce chemical consumption in cooling towers by eliminating bio-loads in the system.

Helps Companies Conform to State & Local EPA Recommendations and Guidelines calling for reductions in chemical usage.

BenefitsCooling Tower Applications ■Prevents clogging of fill material (extends fill life). ■Prevents Sludge Build-up in water basins. ■Prevents clogging of sump and in-line strainers, blow-down valves and heat exchangers. ■Helps fight bacterial proliferation (eliminates nutrient source). ■Diffuses sunlight to help fight algae growth. ■Helps increase water treatment chemical effectiveness. ■Reduces maintenance cycle time by up to 50%. ■Eliminates Downtime due to fouling & clogging.

Condensers & Air Cooled Chiller Applications ■Helps protect against hail damage. (hail guard frames required)■Helps prevent coils / fins from clogging. ■Significantly reduces / eliminates damage due to power washing & solvents). ■Helps optimize cooling efficiency■Saves maintenance time & energy

Air Handling Units & Louver Applications ■Prevents "blanketing" of internal filters. ■Enables optimum efficiency of internal filters. ■Protects louver actuators■Helps improve indoor air quality. ■Significantly reduces maintenance cost.

Air Conditioners

Baird Wall Mount Air Conditioning

Rooftop Units

Protects fouling of Split Coil Rooftop Units

Rooftop Unit

Triangular Shaped Filter - commercial grade filters with nylon turn stud fasteners

Air Cooled Condenser Units

Trane CGAFC60 Condenser Unit

Condenser Units

Mitsubishi air cooled condenser with Commercial Grade Air Intake Filter and Turn-stud Fasteners.

Dry Coolers

Industrial Grade Filters w/

Stud Adapter Fasteners

Industrial Grade Filters w/

Slide Mount Fasteners

Industrial Dry Cooler

Industrial Grade Filters With Stud Adapter Fastener Skirting the Legs – Bottom of Filter

Fastens to Angle Iron Which Extends from Leg to Leg at Grade Level.

Air Cooled Chillers

Commercial Grade Filters With Turn Stud Fasteners and Slide-Mount Access Panel

Air Cooled Chillers

Commercial Grade Filter with Velcro Fastening

Air Cooled Chiller

RTAA Air Cooled Chiller with Industrial Grade Air Intake Filter and Stud Adapter Fasteners

Air Cooled Chiller

Industrial Grade Air Intake Filter With Stud Adapter Fasteners Filter is cut and fitted around the water lines –

clips lock the cut sections back together

Air Cooled Chiller

Air Cooled Chiller

Industrial Grade Filter with Slide Mount Filters

Air Cooled Chiller

Trane RTAA 400 Ton chiller Before Filtration

Chiller with Industrial Grade Filter with stud adapter

fastening

photo shows effect of rain in cleaning the filter - notice how cottonwood seed has been washed toward the bottom of the filter - As rain continues, it can completely clean the filter.

Air Cooled Chiller

Industrial Grade Filters and Stud Adapter Fasteners with Weighted Bottom Pocket

Resting on Rooftop

Rooftop Unit with Hail Guard Protection

Industrial Grade Filters with Hail Guard Stand-off Frames Provides Day to Day Air Intake Filtration and Protection From The

Occasional Hail Storm – Hail Guard Frames Move Filter 3”+ Away From the Coil – Deflecting Hail and Preventing Coil Impact.

Air Cooled Chiller

Industrial Grade Filter with Stud Adapter Fasteners and Hail Guard Stand-off Frames

Hail guard stand-off frames

Weighted filter pocket holds galvanized pipe as weight to hold

filter down to rooftop

Economizer Units

Trane Intellipak Unit with Industrial Grade Filters with Stud Adapter Fasteners – Protects Condensers and helps Prevent

Compressor Failure

Air Handling Units

Commercial Grade Filter with Nylon Turn Stud Fasteners

Industrial Grade Filter with Slide Mount Filter & Galv.

Storage Box

Fresh Air Intake Bonnet

Industrial Grade Filter with Stud Adapter Fasteners

Penthouse Air Handling Units

Pulley Mount Air Intake Filter with Integrated Galvanized Storage Unit

Vertical Air Flow Intakes

Grate Filters

Cooling Tower

BAC Single Cell Cooling Tower With Industrial Grade Stud Adapter Fasteners

Before After

Cooling Tower

Face Back

Industrial Grade Filter with Stud Adapter Fasteners

Cooling Tower

Front Back

Marley NC8310 cooling tower with Industrial Grade Air Intake Filer with Galvanized Storage Unit for storing filter during freezing winter climates.

Optional Galvanized Storage Box

Field Erected Cooling Tower

BAC 300 Series Cooling Tower with Industrial Grade Filter and Stud Adapter Fasteners

Cooling Tower

Marley Cooling Tower with Industrial Grade Pulley Mount Air Intake Filter

Cooling Tower

Cooling Tower

Marley Aqua-tower with Industrial Grade Filter & Stud Adapter Fasteners

Cooling Tower

Cooling Tower

Marley Quadraflow Cooling Tower with Pulley Mount Air Intake Filer System

Cooling Towers

Evapco Cooling Tower with Industrial Grade Filter and Stud Adapter Fasteners

Louver Panels

Compatible with the Best Mechanical Equipment in the Business

Nearly Every Industry Segment

IBM

Fruit Valley

Elementary School

HoneywellIBM

Fruit Valley

Elementary Shool