View
7
Download
0
Category
Preview:
Citation preview
ALUMINIUM PROFILESYSTEM SERIES 40
With the basic grid 20mm (slot 5); 30mm (slot 6), 16mm, 40mm and 80mm (slot 8). In addition to this, the complete connection
technology and a large range of accessories.
ASK - Strong Technology. High Standards. www.askgmbh.com
Technical data and profile cross-sections 2.4 - 2.17 Processing of profiles for connectors 2.18 - 2.19Prices of aluminium profile processing 2.20Aluminium profile prices and delivery units 2.4 - 2.17
ALUMINIUM PROFILES SERIES 40 PAGE
COMPONENTS PAGE Angle connector 2.22Articulated feet 2..56ASK combination foot 2.57ASK handle system 2.40Ball caster 2.42Base plates 2.58Bolt anchor 2.61Bolt connector 2.22Bracket 2.26 - 2.27Bullet catch 2.39Cable carrier 2.50Cable ducts 2.52Carrier rollers 2.42Casters with screw-on plate 2.64 - 2.65Casters with bolt hole 2.62Centring plate kit 2.24Clamping lever 2.43Clamping bracket 2.28Clamping block 2.46Closure profiles 2.46Connecting plate 2.25Corner bracket 2.28Cover and closure profiles 2.46Cover caps for aluminium profiles 2.30Cover cap for bracket 2.29Cover cap for cable duct 2.53Cover for cable duct 2.52Cover caps for corner bracket 2.29Cover cap for handle 2.40Cross-cable tie block 2.50Damping ring for articulated foot 2.56Door lock 2.38Door lock, compact 2.38Door stop 2.39Fastening bracket for bullet catch 2.39Fastening bracket for telescopic support 2.60
TABLE OF CONTENTS | SERIES 40
2.0
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
Fastening kit for casters 2.64Fixed casters with screw-on plate 2.64 - 2.65Form connector 2.25Foundation bracket 2.59Handles 2.40Handle, angled 2.41Heavy duty casters with screw-on plate 2.66Hinges 2.36 -2.37Joints 2.44Joint angle 2.28Lifting caster 2.63Magnetic latch 2.39Multi-uniblock 2.48 - 2.49Plate for articulated feet 2.54Rubber cover profile 2.51Profile connector 2.22Quick connector, rotation lock 2.23Quick connector, screw-in 2.22 Rhomboid T-slot nut 2.33Rollers for roller track 2.43Roller holder 2.42
Round head screws 2.34 - 2.35Screw-in connector 2.25Screws for cover cap 2.53Sealing profile 2.47Sliding strip 2.42
Slot nuts 2.32 - 2.33Steel bracket 2.25Swivel fastening 2.45System slide 2.51Threaded rods with ball 2.55Threaded sleeve 2.55Universal bullet catch 2.38Uni butt connector 2.24Uni clamping kit 2.24Universal floor support 2.60
COMPONENTS PAGE
TABLE OF CONTENTS | SERIES 40
2.1
ASK - Strong Technology. High Standards. www.askgmbh.com
We set the standards for innovation, product and occupational safety, product quality and performance.
2.2
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
Automation components for engineering and industrial companies
We deal with the implementation of simple and cost effective production facilities with the help of our aluminium profile modular system. From 3D construction to straightforward implementation.
For more then ten years we have devoted ourselves to generating the best solutions for the most varied system configurations, in order to be equipped for all eventualities. Our many years of experience enable us to provide the exact solution to meet your requirement. Traditionally grown as well as innovative ideas are taken into consideration and this approach has acquired us high customer satisfaction.
The most varied systems – in particular our modular system - enable a cost friendly and visually appealing implementation of your projects. We supply technical manufacturing facilities for industrial companies and components for machinery and plant engineering. We would be glad to assist you with detailed advice about a suitable system, 3D construction and project planning, complete procurement of individual components and their assembly and corresponding supply of spare parts. In doing so, we not only commit ourselves to the implementation of complex solutions but also to the supply of individual components.
Our multiple and extensive range combined with our straightforward approach will also convince you. Put us to the test!
FROM PLANNING TO IMPLEMENTATION: ASK - EVERYTHING FROM ONE SOURCE
CORPORATE PHILOSOPHY
2.3
ASK - Strong Technology. High Standards. www.askgmbh.com
SERIES 40 | SLOT 5
2.4
20
Ø 4,3
20
6,35
5
20
20 40
6,35
5
Ø 4,3
20
Ø 4,3
20
6,35
5
PROFILE 20 × 20 2N90 slot 5
PROFILE 20 × 20 slot 5
PROFILE 20 × 40 slot 5
Article no.: 202020
Ix 0,78 cm4
Iy 0,78 cm4Wx 0,76 cm³Wy 0,76 cm³
Profile surfaceMass
1,91 cm² 0,51 kg/m
Article no.: 202010
Ix 0,72 cm4
Iy 0,72 cm4Wx 0,72 cm³Wy 0,72 cm³
Profile surfaceMass
1,80 cm² 0,48 kg/m
Article no.: 202030
Ix 0,41 cm4
Iy 5,14 cm4Wx 1,41 cm³Wy 2,57 cm³
Profile surfaceMass
3,32 cm² 0,89 kg/m
20Ø 4,3
20
5
6,35
PROFILE 20 × 20 1N slot 5Article no.: 202012
Ix 0,72 cm4
Iy 0,75 cm4Wx 0,72 cm³Wy 0,72 cm³
Profile surfaceMass
1,85 cm² 0,5 kg/m
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
SERIES 40 | SLOT 5
2.5
Article no.: 202033
Article no.: 202031
2020
60
5
6,35
20
4,3Ø
10 6,35
13
3,50
20
5
3,3
Ø
PROFILE 40 × 40 slot 5
Ix 9,33 cm4
Iy 9,33 cm4Wx 4,62 cm³Wy 4,62 cm³
Profile surfaceMass
5,14 cm² 1,39 kg/m
PROFILE 20 × 80 slot 5
PROFILE 20 × 60 slot 5
PROFILE 20 × 10 slot 5
Article no.: 202034
Ix 2,76 cm4
Iy 36,88 cm4Wx 2,76 cm³Wy 9,02 cm³
Profile surfaceMass
6,25 cm² 1,67 kg/m
Ix 2,06 cm4
Iy 16,09 cm4Wx 2,06 cm³Wy 5,36 cm³
Profile surfaceMass
4,76 cm² 1,28 kg/m
Article no.: 202005
Ix 0,12 cm4
Iy 0,53 cm4Wx 0,22 cm³Wy 0,53 cm³
Profile surfaceMass
1,29 cm² 0,22 kg/m
4020
20 40
Ø4,3
5
6,35
2020
20
80
20
Ø 4,3
6,35
5
ASK - Strong Technology. High Standards. www.askgmbh.com
30
6
9,75
30
Ø 5
30
Ø 5
6030
9,75
6
30
Ø 5
30 60
9.75
6
30
30
Ø 5
9,75
6
30
30
Ø 5
6
9,75
Article no.: 202050
PROFILE 30 × 30 slot 6
PROFILE 30 × 30L slot 6
PROFILE 30 × 30 2N90 slot 6
Article no.: 202045
Ix 4,15 cm4
Iy 4,15 cm4Wx 2,77 cm³Wy 2,77 cm³
Profile surfaceMass
4,67 cm² 1,26 kg/m
PROFILE 30 × 60L slot 6
Ix 5,54 cm4
Iy 21,22 cm4Wx 3,69 cm³Wy 7,07 cm³
Profile surfaceMass
6,13 cm² 1,65 kg/m
Article no.: 202040
Ix 2,90 cm4
Iy 2,90 cm4Wx 1,94 cm³Wy 1,94 cm³
Profile surfaceMass
3,43 cm² 0,93 kg/m
Article no.: 202042
Ix 3,02 cm4
Iy 3,02 cm4Wx 1,98 cm³Wy 1,98 cm³
Profile surfaceMass
3,54 cm² 0,96 kg/m
PROFILE 30 × 60 slot 6Article no.: 202052
Ix 7,92 cm4
Iy 29,30 cm4Wx 5,28 cm³Wy 9,77 cm³
Profile surfaceMass
8,47 cm² 2,29 kg/m
SERIES 40 | SLOT 6
2.6
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
SERIES 40 | SLOT 6
2.7
Article no.: 202058
PROFILE 60 × 60L slot 6
PROFILE 30 × 120 L slot 6
Article no.: 202053
Ix 39,98 cm4
Iy 39,98 cm4Wx 12,96 cm³Wy 12,96 cm³
Profile surfaceMass
10,1 cm² 2,7 kg/m
PROFILE 60 × 120L slot 6
Ix 77,39 cm4
Iy 261,87 cm4Wx 25,8 cm³Wy 43,65 cm³
Profile surfaceMass
18,78 cm² 5,05 kg/m
Article no.: 202057
Ix 11,04 cm4
Iy 154,51 cm4Wx 7,21 cm³Wy 25,44 cm³
Profile surfaceMass
11,65 cm² 3,11 kg/m
3060
3030
30
120
6
9,75
Ø5
3030
30
120
6
9,75
30
Ø5
30
30 60
Ø5
6
9,75
60
PROFILE 60 × 60 slot 6
Article no.: 202054
Ix 53,80 cm4
Iy 53,80 cm4Wx 17,90 cm³Wy 17,90 cm³
Profile surfaceMass
13,3 cm² 3,55 kg/m
6
9,75
Ø5
3060
30 60
ASK - Strong Technology. High Standards. www.askgmbh.com
Article no.: 202060Article no.: 202060LE1#3000
40
40
6,8
8
12,25
Ø
406,8
40
8
12,25
Ø
406,8
40
8
12,25
Ø
PROFILE 40 × 40L slot 8
PROFILE 40 × 40EL slot 8
PROFILE 40 × 40L BLACK ANODISED slot 8
Ix 9,00 cm4
Iy 9,00 cm4Wx 4,50 cm³Wy 4,50 cm³
Profile surfaceMass
6,46 cm² 1,74 kg/m
Article no.: 202071Article no.: 202071LE1#3000
Ix 7,38 cm4
Iy 7,38 cm4Wx 3,69 cm³Wy 3,69 cm³
Profile surfaceMass
5,07 cm² 1,37 kg/m
Article no.: 202060 SW
Ix 9,00 cm4
Iy 9,00 cm4Wx 4,50 cm³Wy 4,50 cm³
Profile surfaceMass
6,46 cm² 1,74 kg/m
Article no.: 20201530
12
3,3
6
9,75
Ø
Ix 0,25 cm4
Iy 1,46 cm4Wx 0,39 cm³Wy 0,98 cm³
Profile surfaceMass
1,58 cm² 0,43 kg/m
PROFILE 30 × 12L slot 6
Article no.: 202043
Ix 2,18 cm4
Iy 2,18 cm4Wx 1,30 cm³Wy 1,30 cm³
Profile surfaceMass
3,05 cm² 0,84 kg/m
PROFILE 30 × 30L R30-90° slot 6
30
6
30
R30
Ø5
9,75
SERIES 40 | SLOT 6 | SLOT 8
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
Article no.: 202070
Article no.: 202065
40
40
8
12,25
6,8Ø
8
40
40
6,8
12,25
Ø
40
40
6,8
8
12,25
Ø
40
40
6,8
8
12,25
Ø
40
40
8
12,25
6,8Ø
Article no.: 202072PROFILE 40 × 40 slot 8
Ix 13,96 cm4
Iy 13,96 cm4Wx 6,98 cm³Wy 6,98 cm³
Profile surfaceMass
9,16 cm² 2,47 kg/m
Article no.: 202069
PROFILE 40 × 40L 2N90 slot 8
PROFILE 40 × 40L 1N slot 8
PROFILE 40 × 40L 2N180 slot 8
Ix 9,64 cm4
Iy 9,64 cm4Wx 4,70 cm³Wy 4,70 cm³
Profile surfaceMass
6,80 cm² 1,84 kg/m
PROFILE 40 × 40L 3N slot 8
Ix 9,62 cm4
Iy 10,22 cm4Wx 4,70 cm³Wy 5,11 cm³
Profile surfaceMass
6,96 cm² 1,90 kg/m
Ix 9,54 cm4
Iy 9,01 cm4Wx 4,66 cm³Wy 4,50 cm³
Profile surfaceMass
6,61 cm² 1,78 kg/m
Article no.: 202068
Ix 9,02 cm4
Iy 10,11 cm4Wx 4,51 cm³Wy 5,05 cm³
Profile surfaceMass
6,77cm² 1,83 kg/m
SERIES 40 | SLOT 8
ASK - Strong Technology. High Standards. www.askgmbh.com
SERIES 40 | SLOT 8
2.10
Article no.: 202080Article no.: 202080LE1#3000
PROFILE 40 × 80L BLACK ANODISED slot 8
40
6,840 80
8
12,25
Ø
PROFILE 40 × 80L slot 8
40
6,8
40 80
8
12,25
Ø
Ix 16,60 cm4
Iy 69,54 cm4Wx 8,30 cm³Wy 17,38 cm³
Profile surfaceMass
11,38 cm² 3,04 kg/m
Article no.: 202080SW
Ix 16,60 cm4
Iy 69,54 cm4Wx 8,30 cm³Wy 17,38 cm³
Profile surfaceMass
11,38 cm² 3,04 kg/m
8
12,25
29 x 200
9
40
5
23
Ø 6,8 40~105
Gewindestift M6x20
Zum Anfertigen von Schutzelementen, Schwenk- und Schiebetüren.Hohe Festigkeit des Rahmens durcheingespannte Flächenelemente.Lieferung erfolgt mit Klemmleiste und Gewindestift M6x20
Article no.: 202063 CLAMP PROFILE 40 × 40 slot 8
Ix 9,51 cm4
Iy 12,27 cm4Wx 4,76 cm³Wy 6,14 cm³
Profile surfaceMass
7,51 cm² 2,30 kg/m
40
8
40
12,25
17
59
Ø 6,8 ~105
29 x 200
Gewindestift M6x20
Zum Anfertigen von Schutzelementen, Schwenk- und Schiebetüren.Hohe Festigkeit des Rahmens durcheingespannte Flächenelemente.Lieferung erfolgt mit Klemmleiste und Gewindestift M6x20
Article no.: 202064CLAMP PROFILE 40 × 40 - 180° slot 8
Ix 11,41 cm4
Iy 13,08 cm4Wx 5,71 cm³Wy 6,54 cm³
Profile surfaceMass
8,41 cm² 2,56 kg/m
Article no.: 202078
40
Ø 6,8
12,25
8
40 80
PROFILE 40 × 80EL slot 8
Ix 15,20 cm4
Iy 57,80 cm4Wx 7,60 cm³Wy 14,50 cm³
Profile surfaceMass
8,95 cm² 2,41 kg/m
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
Article no.: 202090
Article no.: 202079
Article no.: 202082
Article no.: 202081 PROFILE 40 × 80 slot 840
6,8
40 80
8
12,25
Ø
40
40 80
6,8
8
12,25
Ø
40 80
8
12,25
6,8
40
Ø
80
40
8040
6,8
8
12,25
Ø
Ix 26,87 cm4
Iy 101,19 cm4Wx 13,44 cm³Wy 25,29 cm³
Profile surfaceMass
16,76 cm² 4,53 kg/m
PROFILE 40 × 80L 2N slot 8
Ix 17,73 cm4
Iy 70,87 cm4Wx 8,63 cm³Wy 17,72 cm³
Profile surfaceMass
11,60 cm² 3,13 kg/m
PROFILE 40 × 80 3N90 slot 8
Ix 18,24 cm4
Iy 76,12 cm4Wx 9,17 cm³Wy 17,72 cm³
Profile surfaceMass
11,98 cm² 3,14 kg/m
PROFILE 80 × 80L slot 8
Ix 134,06 cm4
Iy 134,06 cm4Wx 33,51 cm³Wy 33,51 cm³
Profile surfaceMass
19,75 cm² 5,33 kg/m
SERIES 40 | SLOT 8
2.11
ASK - Strong Technology. High Standards. www.askgmbh.com
SERIES 40 | SLOT 8
2.12
4080
40 80
8
12,25
6,8Ø
4040
120
8
12,25
40
6,8Ø
6,8
40
4040
120
8
12,25
Ø
Article no.: 202091 PROFILE 80 × 80 slot 8
Ix 187,70 cm4
Iy 187,70 cm4Wx 46,92 cm³Wy 46,92 cm³
Profile surfaceMass
26,66 cm² 7,19 kg/m
Article no.: 202083 PROFILE 40 × 120L slot 8
Ix 24,22 cm4
Iy 220,54 cm4Wx 12,11 cm³Wy 36,76 cm³
Profile surfaceMass
16,12 cm² 4,35 kg/m
Article no.: 202084 PROFILE 40 × 120 slot 8
Ix 39,80 cm4
Iy 322,66 cm4Wx 19,90 cm³Wy 53,77 cm³
Profile surfaceMass
24,38 cm² 6,58 kg/m
8
12,25
Ø6,8
40 80
4080
Article no.: 202094 PROFILE 80 × 80L 2N slot 8
Ix 139,30 cm4
Iy 135,20 cm4Wx 34,22 cm³Wy 33,60 cm³
Profile surfaceMass
20,05 cm² 5,45 kg/m
4080
40 80
8
12,25
Ø6,8
Article no.: 202097 PROFILE 80 × 80L 4N90 slot 8
Ix 139,80 cm4
Iy 139,80 cm4Wx 34,50 cm³Wy 34,50 cm³
Profile surfaceMass
20,40 cm² 5,50 kg/m
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
4080
4040
120
8
12,25
6,8Ø
40
80
4040
120
6,8
8
12,25
Ø
40
6,8
4040
40
160
12,25
8
Ø
Article no.: 202095 PROFILE 80 × 120L slot 8
Ix 201,89 cm4
Iy 421,67 cm4Wx 50,47cm³Wy 68,34 cm³
Profile surfaceMass
30,13 cm² 8,13 kg/m
Article no.: 202096 PROFILE 80 × 120 slot 8
Ix 274,86 cm4
Iy 574,86 cm4Wx 68,71 cm³Wy 92,72 cm³
Profile surfaceMass
40,05 cm² 10,81 kg/m
Article no.: 202085PROFILE 40 × 160L slot 8
Ix 31,81 cm4
Iy 500,32 cm4Wx 15,90 cm³Wy 62,54 cm³
Profile surfaceMass
20,90 cm² 5,64 kg/m
SERIES 40 | SLOT 8
2.13
ASK - Strong Technology. High Standards. www.askgmbh.com
406,8
4040
40
160
8
12,25
Ø
40
80
4040
40
160
8
12,25
6,8Ø
40
80
4040
40
160
8
12,25
6,8Ø
Article no.: 202086 PROFILE 40 × 160 slot 8
Ix 52,72 cm4
Iy 739,62 cm4Wx 26,36 cm³Wy 92,45 cm³
Profile surfaceMass
32,00 cm² 8,64 kg/m
Article no.: 202099 PROFILE 80 × 160L slot 8
Ix 267,07 cm4
Iy 907,88 cm4Wx 66,77 cm³Wy 113,48 cm³
Profile surfaceMass
37,80 cm² 10,21 kg/m
Article no.: 202100 PROFILE 80 × 160 slot 8
Ix 360,89 cm4
Iy 1228,33 cm4Wx 90,22 cm³Wy 153,54 cm³
Profile surfaceMass
50,07 cm² 13,52 kg/m
SERIES 40 | SLOT 8
2.14
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
80
16
8
12,254,2
Ø
40
12,25 16
8
5Ø
40
12,25 16
5
8
Ø
Article no.: 202056 PROFILE 40 × 16L slot 8
Ix 0,64 cm4
Iy 3,34 cm4Wx 0,78 cm³Wy 1,67 cm³
Profile surfaceMass
2,24 cm² 0,60 kg/m
Article no.: 202055 PROFILE 40 × 16 slot 8
Ix 1,05 cm4
Iy 6,89 cm4Wx 1,22 cm³Wy 3,45 cm³
Profile surfaceMass
4,24 cm² 1,12 kg/m
Article no.: 202088 PROFILE 80 × 16 slot 8
Ix 2,15 cm4
Iy 50,76 cm4Wx 2,69 cm³Wy 12,69 cm³
Profile surfaceMass
8,13 cm² 2,20 kg/m
160
5
6,28
12,25
16
Article no.: 202089 PROFILE 160 × 16 slot 8
Ix 3,80 cm4
Iy 307,83 cm4Wx 4,25 cm³Wy 38,48 cm³
Profile surfaceMass
13,88 cm² 3,75 kg/m
SERIES 40 | SLOT 8
2.15
ASK - Strong Technology. High Standards. www.askgmbh.com
40
40
6,8
8
12,25
45°
Ø
840
40
Ø 6,8
12.25
45°
40
40
6,8
12,25
R 40
8
Ø12
,25R 40
R 80 30°
8
8
12,25
R 80
R 40
45°
6,8
Ø
Article no.: 202073
PROFILE 40 × 40 | 45° slot 8
PROFILE 40 × 40L |45° slot 8
PROFILE 40 × 40L R40 - 90° slot 8
Article no.: 202066
Ix 9,39 cm4
Iy 9,39 cm4Wx 4,08 cm³Wy 4,08 cm³
Profile surfaceMass
7,30 cm² 1,97 kg/m
PROFILE R40 / R80 - 30° slot 8
Ix 6,42 cm4
Iy 8,90 cm4Wx 2,84 cm³Wy 3,80 cm³
Profile surfaceMass
6,20 cm² 1,67 kg/m
Article no.: 202067
Ix 6,50 cm4
Iy 6,50 cm4Wx 2,90 cm³Wy 2,90 cm³
Profile surfaceMass
5,58 cm² 1,50 kg/m
Article no.: 202061
Ix 6,65 cm4
Iy 6,65 cm4Wx 3,04 cm³Wy 3,04 cm³
Profile surfaceMass
5,72 cm² 1,54 kg/m
PROFILE R40 / R80 - 45° slot 8
Article no.: 202074
Ix 21,33 cm4
Iy 16,06 cm4Wx 6,74 cm³Wy 6,14 cm³
Profile surfaceMass
10,23 cm² 2,76 kg/m
SERIES 40 | SLOT 8
2.16
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
Article no.: 99900040
Article no.: 202035
Article no.: 202076
Article no.: 202075 PROFILE R40/R80 - 60° slot 8
Ix 22,64 cm4
Iy 34,92 cm4Wx 5,96 cm³Wy 11,56 cm³
Profile surfaceMass
10,50 cm² 2,82 kg/m
PROFILE R40/R80 - 90° slot 8
Ix 76,25 cm4
Iy 76,25 cm4Wx 18,69 cm³Wy 18,69 cm³
Profile surfaceMass
15,00 cm² 4,05 kg/m
PROFILE 32 × 18 slot 8
Ix 2,50 cm4
Iy 2,50 cm4Wx 1,70 cm³Wy 1,70 cm³
Profile surfaceMass
3,30 cm² 0,90 kg/m
SHAFT CLAMP PROFILE slot 8
Profile surfaceMass
1,36 cm² 0,36 kg/m
8
12,25
90°
6,8
R 40
R 80
Ø
8
R 40
R 80 60°6,8
12,25
Ø
32
8
18
12,25
8
2210 8
1418Ø
Article no.: 99900039SHAFT D14
Material:Mass:
Hardened steel, Cf53, polished1,21 kg/m
SERIES 40 | SLOT 8
2.17
ASK - Strong Technology. High Standards. www.askgmbh.com
Article no.: 380003
Profile 20x20 slot 5
Hole Ø Ø 5mm
Distance (b) 10mm
Thread M5
PROFILE PROCESSING FOR CENTRING PLATE KIT s5|s6|s8
Article no.: 380005
Profile 30x30 slot 6
Hole Ø Ø 6mm
Distance (b) 15mm
Thread M6
Article no.: 380010
Profile 40x40 slot 8
Hole Ø Ø 7mm
Distance (b) 20mm
Thread M8
Article no.: 371005
Profile 20x20 slot 5
Hole Ø Ø 12mm
Distance (b) 11mm
Depth (c) 9 mm
PROFILE PROCESSING FOR UNI CLAMPING KIT s5|s6|s8
Article no.: 371010
Profile 30x30 slot 6
Hole Ø Ø 16mm
Distance (b) 15mm
Depth (c) 14 mm
Article no.: 371020
Profile 40x40 slot 8
Hole Ø Ø 20mm
Distance (b) 21mm
Depth (c) 18 mm
380010
371020
PROCESSING ALUMINIUM PROFILES SERIES 40
c
b
Ø
-M-
Ø
b
-M-
Ø
b
2.18
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
Article no.: 360009
Profile 40x40 slot 8
Hole (Ø a) Ø 14,1mm
Distance (b) 20mm
b
Ø a Article no.: 360019
Profile 80x80 slot 8 and 40x80 slot 8
Hole (Ø a) Ø 14,1mm
Distance (b) 20mm
360009
360019
Ø 12
Ø8
30
15 Central connector Article no.: 323050
Slot 8mm
Material Steel galvanised
QUICK CONNECTOR with rotation lock slot 8
PROCESSING ALUMINIUM PROFILES SERIES 40
PROFILE PROCESSING FOR BOLT CONNECTOR slot 8
2.19
ASK - Strong Technology. High Standards. www.askgmbh.com
Cuts
1 Saw cut for small sized cross sections 101010
2 Saw cut for average sized cross sections 101020
3 Saw cut for large sized cross sections 101030
4 Saw cut for extra-large sized cross sections 101040
5 Saw cut on mitre 101050
ITEM DESIGNATION ARTICLE NO.
Holes
6 Hole up to & including Ø 10.0 102010
7 Hole up to & including Ø 15.0 102020
8 Hole up to & including Ø 20.0 102030
Thread
9 Thread M6 103009
10 Thread M8 103010
11 Thread M12 103020
12 Thread M16 103030
PROCESSING ALUMINIUM PROFILES SERIES 40
2.20
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
Cuts
1 Saw cut for small sized cross sections 101010
2 Saw cut for average sized cross sections 101020
3 Saw cut for large sized cross sections 101030
4 Saw cut for extra-large sized cross sections 101040
5 Saw cut on mitre 101050
Holes
6 Hole up to & including Ø 10.0 102010
7 Hole up to & including Ø 15.0 102020
8 Hole up to & including Ø 20.0 102030
Thread
9 Thread M6 103009
10 Thread M8 103010
11 Thread M12 103020
12 Thread M16 103030
TECHNICAL DATA ALUMINIUM PROFILES SERIES 40
Alloy EN AW6060 T68
Material No. 3.3206.72 (heat-hardened)
Mechanical data(values in pressing direction)
Tensile strength Rm min. 240 N/mm²
Yield limit Rp 0.2 min. 190 N/mm²
Breaking elongation A5 min. 10%
E module approx. 70.000 N/mm²
Brinell hardness approx. 75 HB 2,5/187,5
Coefficient of linear expansion 23,8x10-6/K
Surface per DIN 17611 E6/EV1- matt pickled and natural colour anodised
Layer thickness approx. 10µm
Layer hardness 250-350 HV
Special colours on requestDelivery length 6000mm (or special data in the catalogue)
EXTRUSION PROFILES PER DIN EN 12020-1
PROFILE TOLERANCES
The dimension information is dependent on the production accuracy of the tools, the tool wear and the production fluctuations.
Within a profile production batch deviations arise within the 1/100 range.
0 – 10 ± 0,15
10 – 15 ± 0,20
15 – 30 ± 0,25
30 – 45 ± 0,30
45 – 60 ± 0,40
60 - 90 ± 0,45
90 – 120 ± 0,60
120 – 150 ± 0,80
150 – 180 ± 1,00
180 - 240 ± 1,20
PROFILE TOLERANCES IN MM Measurement range from - to Tolerance ±
2.21
ASK - Strong Technology. High Standards. www.askgmbh.com
Profile connector slot 8 Article no.: 344010
Length Scope of supplySlotMaterial
180mmIncl. fastening kit M6
8mmSteel galvanised
8,5
76180
8,5
76
8
2
6
360009
PROFILE CONNECTOR slot 8
CONNECTION TECHNOLOGY SERIES 40
5240
12 45° 40
10
Ø8,5
Ø17
M10
61
SW6
25.5
40 Ø14
65,5
80 Ø14
Angle connector 45° Article no.: 351300
ProfileScope of supplySlotMaterial
40 x 40Incl. fastening kit M8
8mmZinc die cast, aluminium
colour-coated
ANGLE CONNECTOR 45° slot 8
Screw-in type Article no.: 323025
ThreadHoleSlotMaterial
M1017mm8mm
Steel galvanised
For fastening aluminium profiles to plates
QUICK CONNECTOR screw-in slot 8
Bolt connector 40 Article no.: 360009
LengthSlotMaterial
40mm8mm
Steel galvanised
BOLT CONNECTOR Ø 14MM slot 8
Bolt connector 80 Article no.: 360019
LengthSlotMaterial
80mm8mm
Steel galvanised
Conductive material design per DIN EN 61340-5-1; suitable for use in ESD protected zones.
2.22
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
CONNECTION TECHNOLOGY SERIES 40
Ø7,8
Ø 11,8
35,1
SW4
Ø17
,4
Quick connector with rotation lock
Article no.: 323050
SlotMaterial
8mmGalvanised steel
QUICK CONNECTOR with rotation lock slot 8
2.23
ASK - Strong Technology. High Standards. www.askgmbh.com
c
b
Øa
380010
371020
371030
UNI CLAMPING KIT slot 5|slot 6|slot 8
cØ
ab
b-M
-
Ø
b
-M-
Ø
b
cØ
a
b
b
Uni clamping kit slot 5 a= Ø12mm, b= 11mm, c= 9mm
Article no.: 371005
Uni clamping kita= Ø16mm, b= 15mm, c= 14mm
Article no.: 371010
Uni clamping kita= Ø20mm, b= 21mm, c= 18mm
Article no.: 371020
Scope of supply
Material
Incl. connector, screw and slot nut
Zinc die cast
Uni butt connectora= Ø20mm, distance b= 21mm, Depth c= 16,5mm
Article no.: 371030
Scope of supplyMaterial
Incl. connection kit and screwZinc die cast
UNI BUTT CONNECTOR slot 8
CENTRING PLATE KIT slot 5|slot 6|slot 8 Centring plate kit slot 5a= 10mm, Ø4,5mm, M5
Article no.: 380003
Centring plate kit slot 6a= 15mm, Ø5,5mm , M6
Article no.: 380005
Centring plate kit slot 8a= 20mm, Ø7,5mm , M8
Article no.: 380010
Scope of supplyMaterial
Incl. connector, screw Steel galvanised
CONNECTION TECHNOLOGY SERIES 40
2.24
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
CONNECTION TECHNOLOGY SERIES 40
2.25
Form connector = right-hand threadScrew-in connector = left-hand thread
390012
6.4
24Ø 7,1
20
Ø 10
31
Ø 12
390002
390004
Ø12
24
390012
Form connector slot 5 Scope of supply
Article no.: 390002Sleeve, screw M4, slot nut
Form connector slot 6Scope of supply
Article no.: 390004Sleeve, screw M6, slot nut
Form connector slot 8Scope of supply
Article no.: 390010Sleeve, screw M8, slot nut
Screw-in connector set slot 5Scope of supply
Article no.: 390003Sleeve, screw M4, slot nut
Screw-in connector set slot 6Scope of supply
Artikel Nr.: 390006Sleeve, screw M5, slot nut
Screw-in connector set slot 8 Scope of supply
Article no.: 390012Sleeve, screw M6, slot nut
Cover cap for screw-in connector for Art.no. 390012
Article no.: 390014
Material form connectorMaterial screw-in connectorMaterial cover cap
Steel galvanisedSteel galvanised
PA, black
FORM CONNECTOR / SCREW-IN CONNECTOR slot 5|slot 6|slot 8
390003
31
6,5
7
390003
390006
27
Ø10
390006
390010
ASK - Strong Technology. High Standards. www.askgmbh.com
CONNECTION TECHNOLOGY SERIES 40
2.26
4
40
80
40
AM8
20
20
3
10
AM5
3
30
60
AM6
30
20x40 Article no.: 99900543
30x60 Article no.: 358010
40x80 Article no.: 358020
Material Steel, powder-coated black
CONNECTING PLATE slot 6 | slot 6 | slot 8
20x20 Article no.: 99900221
30x30 Article no.: 358015
40x40 Article no.: 358030
Material Steel, powder-coated black
STEEL BRACKET slot 5 | slot 6 | slot 8
20
40
AM5
20
3
30
30
3
15
AM6
40
40
4
20
AM8
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
CONNECTION TECHNOLOGY SERIES 40
2.27
351221
351241
351261
30
30
30
20
2020
39 40
40
351242
30 60
60Without fastening kit | Slot 5 Article no.: 351211
With fastening kit | Slot 5 Article no.: 351221
Material Zinc die castAluminium colour-coated
BRACKET 20 x 20 slot 5
BRACKET 30 x 30 slot 6 Without fastening kit | Slot 6 Article no.: 351231
With fastening kit | Slot 6 Article no.: 351241
Material Zinc die castAluminium colour-coated
BRACKET 30 x 60 slot 6 Without fastening kit | Slot 6 Article no.: 351242
With fastening kit | Slot 6 Article no.: 351243
Material Zinc die castAluminium colour-coated
BRACKET 40 x 40 slot 8 Without fastening kit | Slot 8 Article no.: 351251
With fastening kit | Slot 8 Article no.: 351261
Material Zinc die castAluminium colour-coated
ASK - Strong Technology. High Standards. www.askgmbh.com
CONNECTION TECHNOLOGY SERIES 40
2.28
Without fastening kit | Slot 8 Article no.: 351291
With fastening kit | Slot 8 Article no.: 351301
Material Zinc die castAluminium colour-coated
BRACKET 40 × 80 slot 8
BRACKET 80 × 80 slot 8 Without fastening kit | Slot 8 Article no.: 351111
With fastening kit | Slot 8 Article no.: 351121
Material Zinc die castAluminium colour-coated
BRACKET 80 × 160 slot 8 Without fastening kit | Slot 8 Article no.: 351311
With fastening kit and cover cap | Slot 8
Article no.: 351321
Material Zinc die castAluminium colour-coated
351301
39 80
80
74 76
76
40
160
80
39 80
80
74 76
76
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
40x40 | slot 8 Article no.: 351210
Scope of supplyMaterial
Bracket, fastening kit Zinc die cast
Aluminium colour-coated
40x40 | slot 8 Article no.: 351220
Scope of supplyMaterial
Bracket, fastening kit Zinc die cast
Aluminium colour-coated
30x30 | slot 6 Article no.: 352005
40x40 | slot 8 Article no.: 352010
Scope of supplyMaterial
Bracket, fastening kit Zinc die cast
Aluminium colour-coated
32
6
20
Ø 9,5
35
367,5
9
32
20
Ø 14
Ø 9
6
36
36
Ø 9
15
15
5
6
27,5
27,5
Ø6,5
5
20
20
8 37,2
37,2
Ø9
CLAMPING ANGLE slot 8
JOINT ANGLE slot 8
CORNER BRACKET slot 6|slot 8
CONNECTION TECHNOLOGY SERIES 40
2.29
ASK - Strong Technology. High Standards. www.askgmbh.com
Slot 5Slot 6Slot 8
t = 4mmt = 3mmt = 4mm
Material Plastic PA
COVER CAPS FOR ALUMINIUM PROFILES s5 | s6 | s8
CONNECTION TECHNOLOGY SERIES 40
2.30
30x30 angled Article no.: 352015
30x30 round Article no.: 352016
40x40 angled Article no.: 352020
40x40 round Article no.: 352030
Material Plastic PA
20x20x20 Article no.: 321132
30x30x30 Article no.: 321143
40x40x40 Article no.: 321146
40x80x80 Article no.: 321148
80x80x80 Article no.: 321175
Material Plastic PA
COVER CAP FOR CORNER BRACKET slot 6|slot 8
COVER CAPSFOR BRACKETS slot 5|slot 6|slot 8
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
CONNECTION TECHNOLOGY SERIES 40
2.31
COVER CAP FOR CORNER BRACKET slot 6|slot 8
COVER CAPSFOR BRACKETS slot 5|slot 6|slot 8
COVER CAPS FOR ALUMINIUM PROFILES
1 10x20 | slot 5 421005
2 20x20| slot 5 421010
3 20x20 t=2,5 | slot 5 421011
4 16x40| slot 8 421015
5 16x80| slot 8 421016
6 16x160| slot 8 421018
7 20x40| slot 5 421020
8 20x60 t=2,5| slot 5 421025
9 20x80 t=2,5| slot 5 421027
10 30x12 | slot 6 421029
11 30x30 | slot 6 421030
12 30x60 | slot 6 421035
13 30x120 | slot 6 421036
14 60x120 | slot 6 421037
15 40x40 | slot 8 421040
16 40x40 | slot 8, grey, similar to RAL 7042 99900685
17 40x40R| slot 8 421041
18 40x40 45°| slot 8 421042
19 R40/80-30°| slot 8 421043
20 R40/80-45°| slot 8 421044
21 R40/80-60°| slot 8 421045
22 R40/80-90°| slot 8 421046
23 40x40 | slot 8, screw-mountablefor screw countersunk M4x16
421047
24 40x40 | slot 8, with hole Ø10,5mm 421048
25 40x80 | slot 8 421050
26 40x80 | slot 8, grey, similar to RAL 7042 99900694
27 40x80 | slot 8, screw-mountablefor screw countersunk M4x16
421051
28 40x120| slot 8 421055
29 40x120 | slot 8, grey, similar to RAL 7042 99900684
30 40x160| slot 8 421057
31 80x80 | slot 8 421060
32 80x80 | slot 8, grey, similar to RAL 7042 99900855
33 80x120 | slot 8 421070
34 80x160 | slot 8 421080
Item Designation Article no.
ASK - Strong Technology. High Standards. www.askgmbh.com
CONNECTION TECHNOLOGY SERIES 40
2.32
353030
354025
17
M
10.6
6,4 0,6
7
0,6
4,6
4,9
7,7
12
M
Slot 5 | M3 Article no.: 353010
Slot 5 | M4 Article no.: 353020
Slot 5 | M5 Article no.: 353030
Material Steel galvanised
SLOT NUT SLOT 5 swivelling with ball
Slot 5 | M3 Article no.: 354005
Slot 5 | M4 Article no.: 354015
Slot 5 | M5 Article no.: 354025
Slot 5 | M6 Article no.: 354035
Material Steel galvanised
SLOT NUT SLOT 6 swivelling with ball
355041
Slot 5 | M5 Article no.: 355031
Slot 5 | M6 Article no.: 355041
Slot 5 | M8 Article no.: 355051
Material Stainless steel
SLOT NUT SLOT 8 VA swivelling with ball
Slot 5 | M4 Article no.: 998096
Slot 5 | M5 Article no.: 998097
Slot 5 | M6 Article no.: 998098
Slot 5 | M8 Article no.: 998099
Material Steel galvanised
SLOT NUT SLOT 8 swivelling with ball without stay
998096
713,5
22
M
7,2
0,8
7,8
22
13,5
M
7,6
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
CONNECTION TECHNOLOGY SERIES 40
2.33
3550409,6
2,9
7,9
17
M
22
356010
356050
6,8
M
23
18
Slot 8 | M4 Article no.: 355020
Slot 8 | M4 ESD Article no.: 355022
Slot 8 | M5 Article no.: 355030
Slot 8 | M5 ESD Article no.: 355032
Slot 8 | M6 Artikel Nr.: 355040
Slot 8 | M6 ESD Article no.: 355042
Slot 8 | M8 Article no.: 355050
Slot 8 | M8 ESD Article no.: 355052
Material Steel galvanised
SLOT NUT SLOT 8 swivelling with ball
Slot 8 | M6 Article no.: 356010
Slot 8 | M8 Article no.: 356020
Material Steel galvanised
SLOT NUT SLOT 8 heavy, without stay
Slot 8 | M4 Article no.: 356030
Slot 8 | M5 Article no.: 356040
Slot 8 | M6 Article no.: 356050
Slot 8 | M8 Article no.: 356060
Material Steel galvanised
SLOT NUT SLOT 8 heavy, with stay
7,2
0,8
7,8
22
13,5
M7,6
ASK - Strong Technology. High Standards. www.askgmbh.com
M4 x 6 Article no.: 370010
M4 x 8 Article no.: 370020
M4 x 10 Article no.: 370030
M4 x 12 Article no.: 370040
M4 x 14 Article no.: 370050
Strength classMaterial
10.9Galvanised steel
BUTTON HEAD SCREWS M4 ISO 7380
M5 x 10 Article no.: 370060
M5 x 12 Article no.: 370070
M5 x 14 Article no.: 370080
M5 x 16 Article no.: 370090
M5 x 20 Article no.: 370100
Strength classMaterial
10.9Galvanised steel
BUTTON HEAD SCREWS M5 ISO 7380
CONNECTION TECHNOLOGY SERIES 40
2.34
357020
14
19M
8
8,3
2,9
Slot 8 | M4 Article no.: 357005
Slot 8 | M5 Article no.: 357010
Slot 8 | M6 Article no.: 357020
Material Steel, galvanised
RHOMBOID T-SLOT NUT swivelling, slot 8
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
Other screw forms, screw sizes and thread sizes on request
M6 x 10 Article no.: 370120
M6 x 12 Article no.: 370130
M6 x 14 Article no.: 370140
M6 x 16 Article no.: 370150
M6 x 20 Article no.: 370160
Strength classMaterial
10.9Galvanised steel
BUTTON HEAD SCREWS M6 ISO 7380
M8 x 16 Article no.: 370170
M8 x 18 Article no.: 370180
M8 x 20 Article no.: 370190
M8 x 30 Article no.: 370200
Strength classMaterial
10.9Galvanised steel
BUTTON HEAD SCREWS M8 ISO 7380
M6 x 14 Article no.: 370210
M6 x 16 Article no.: 370220
M6 x 20 Article no.: 370230
Strength classMaterial
10.9Galvanised steel
BUTTON HEAD SCREWSwith flange ISO 7380-2 M6
CONNECTION TECHNOLOGY SERIES 40
2.35
ASK - Strong Technology. High Standards. www.askgmbh.com
ACCESSORIES SERIES 40
2.36
422020
Ø 6,6
9
Ø 14
Nut
Ø6
A1 A2
B1 B2
48 28
30 x 30 Article no.: 422010
Dimensions A1=17,5mm A2=17,5mm B1=29,5mm B2=29,5mm
slot 6mm
30 x 40 Article no.: 422020
Dimensions A1=17,5mm A2=22,5m B1=29,5mm B2=38,5m
slot 6 | slot 8
40 x 40 Article no.: 422030
Dimensions A1=22,5mm A2=22,5mm B1=38,5mm B2=38,5mm
slot 8mm
Scope of supply Hinges with fastening kit Material Plastic PA glass fibre reinforced,
axis stainless steel
PLASTIC HINGES slot 6|slot 8
422040
20 x 32 Article no.: 99900054
Scope of supply Hinge without fastening kit Material Plastic PA glass fibre reinforced
HINGE PLASTIC (MINI) slot 5
99900054
20,4032
Ø4
Ø8
Ø 5,2Ø 5
6
99900231
Ø15
Ø 6,4
7,5
Ø 8
6040
32
32 x 60 left Article no.: 99900231
32 x 60 right Article no.: 99900083
Scope of supply Hinge without fastening kit Material Plastic PA glass fibre reinforced,
axis stainless steel
HINGES LEFT / RIGHT slot 8
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
ACCESSORIES SERIES 40
422040
2.37
402051
Ø8
Ø20
14
8
20
8,3
Ø8,3
80
24
40
13
5,5
9,5
Ø14
Ø6
Ø6,4
13
6,4
60
18
30
11
402045 402051
30x60 | slot 6 Article no.: 402045
40x80 | slot 8 Article no.: 402051
Material Zinc die cast, axis stainless steel
HINGES WITH ELONGATED HOLE
Hinge left Article no.: 422040
Hinge right Article no.: 422045
Scope of supply
Material
Hinge without fastening kit Anodised aluminium,
axis stainless steel
HINGE INTERNAL ALUMINIUM slot 8
422040
422045
20,5
20,5
2614
103050
Ø 5
1030 50
1426
4,5
Ø 6,6R5,5
26 14
3010
50
20,5
Ø 5
20,5
14 26
103050
Ø 6,6
4,5
R5,5
422040 422045
20 x 20 Article no.: 99900265
Dimensions A1=11,25mm A2=11,25mm B1=19,5mm B2=19,5mm
slot 1=5mm, slot 2=6mm
30 x 30 Article no.: 99900266
Dimensions A1=17,5mm A2=17,5m B1=29,5mm B2=29,5m slot 1=6mm, slot 2=8mm
40 x 40 Article no.: 99900267
Dimensions A1=22,5mm A2=22,5mm B1=35,5mm B2=35,5mm
slot 1=8mm, slot 2=10mm
Scope of supply Hinge without fastening kit Material Anodised aluminium,
axis stainless steel
HINGES ALUMINIUM s5|s6|s8
99900267Ø 4,5
Ø8
Ø2,5
517 33
A1 A2
B1 B2
Nut1Nut2
Ø 6,5Ø14
Ø6,2
928 50
A1 A2
B1 B2
Nut 1 Nut 2
99900266 & 99900267
Ø 4,5
Ø8
Ø2,5
517 33
A1 A2
B1 B2
Nut1Nut2
Ø 6,5Ø14
Ø6,2
928 50
A1 A2
B1 B2
Nut 1 Nut 2
99900265
ASK - Strong Technology. High Standards. www.askgmbh.com
80 64,5 75
>5
35
20
38
53
66
30
30, 40, 45, 50
Simultaneous locking Article no.: 404010
Separate locking Article no.: 404020
Material Zinc die cast
Montage requires further processing
DOOR LOCK slot 6|slot 8
16
29
37
37
7
47
5,428 40 57 74
19,5
UNIVERSAL BULLET LATCH s6|s8|s10
Universal bullet latch Article no.: 405040
Material Plastic PA, glass fibre reinforced
405040
405040
Simultaneous locking Article no.: 404012
Separate locking Article no.: 404022
Material Aluminium die cast
No further processing required
DOOR LOCK COMPACT
45 7856
69
>5
24,5
31,5
36,5
56
40
30, 40, 45, 50
ACCESSORIES SERIES 40
2.38
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
20
10
4030
13,50
6,20
24
10
20
5,2 12,5
33 43,5
28
12,5
M8
Ø7 SW 13
24
10
20
5,2 12,5
33 43,5
28
12,5
M8
Ø7 SW 13
Magnetic latch Article no.: 405010
Material Plastic PA, glass fibre reinforced
MAGNETIC LATCH slot 6|slot 8
BULLET CATCH slot 6|slot 8
Bullet catch Article no.: 405022
Material Plastic PA, glass fibre reinforced
40
Ø4,3
0
8 35
42
Ø8
4,5
20
Door stop(with fastening kit)
Article no.: 405050
Function
Material
Stop bracket with wedge For damping with
2 elastomer insertsPlastic PA
glass fibre reinforced
DOOR STOP slot 8
MOUNTING BRACKET FOR BULLET CATCH Mounting bracket Article no.: 405021
Material Steel, black powder coated
405021
6,1
49
9.5
12.5
37
4
8.5
3132
15.75
6075
4.5
31 20.75
5
405022
405010
ACCESSORIES SERIES 40
2.39
ASK - Strong Technology. High Standards. www.askgmbh.com
403060
403071
403070
a
b
c
d
Ø e
Handle PA 80 Article no.: 403058
Dimensions a = 90mm b = 32mm c = 80mm d =12mm e = Ø4,5mm
Handle PA 120 Article no.: 403060
Dimensions a = 136mm b = 48,5mm c = 120mm d =17mm e = Ø5,5mm
Handle PA 160 Article no.: 403070
Dimensions a = 188mm b = 60mm c = 160mm d =28mm e = Ø8,5mm
Material Plastic PA, glass fibre reinforced
PLASTIC HANDLE
COVER CAP FOR HANDLE Cover cap for handle PA 160 Article no.: 403071
Material Plastic PA glass fibre reinforced
ASK handle system Article no.: 403040
Dimensions X = 200-500mm
ASK handle system Article no.: 403050
Dimensions X = 501 - 800mm
Material Plastic PA ,glass fibre reinforced
ASK HANDLE SYSTEM
ACCESSORIES SERIES 40
2.40
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
160
177
~35°
M8
32
54
HANDLE 160, ANGLED Handle, angled 160 Article no.: 403055
Material Anodised EL (natural colour)
M 5
10
Ø 10
40
120 HANDLE 120 Handle 120 Article no.: 403100
Material Aluminium, black
HANDLE 120, CURVED Handle 120 curved Article no.: 403101
Material Aluminium, black
MOUNTING KIT FOR HANDLE AL120 Article no.: 403102
Scope of supply 2 straps 120, GD-Zn, black
2 countersunk screws DIN7991 M5x10,
Steel galvanised
120
M 5
10
Ø 10
40
40
5
12
16
ACCESSORIES SERIES 40
2.41
ASK - Strong Technology. High Standards. www.askgmbh.com
406010
8
10
12,8
4
32
21
Ø 24Ø 31
2,80
6,30
9,5
8
50
Ø6,5
7
1810
12
8
8
50
Ø6,5
7
1810
12
8
CARRIER ROLLER WITH BALL BEARING s8Carrier roller slot 8For linear movement in the profile slot
Article no.: 406010
Max. payload Material
150NPlastic PA
glass fibre reinforced
Roller holder Article no.: 417010
Roller holder ESD Article no.: 417015
SlotMaterial
8mm / 10mmPlastic PA,
glass fibre reinforced
ROLLER HOLDER slot 8|slot 10
SLIDING STRIP slot 8
Sliding strip Article no.: 413085
LengthSlotMaterial
2000mm8mm
Plastic PA, glass fibre reinforced
BALL CASTER BC 15 slot 8
Ball caster 15 Article no.: 418210
DimensionsMaterial
Ball Ø 15,0mmHousing: galvanised
steel; Ball: stainless steel
Conductive material design per DIN EN 61340-5-1; suitable for use in ESD protected zones.
ACCESSORIES SERIES 40
2.42
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
Rollenlänge=(EL-3)
Sägelänge=(EL-20)
Achslänge=(El+20)
Einbaulänge=(AL-20)
Installation length EL = up to 300mm
Article no.: 417020
Installation lengthEL = up to 500mm
Article no.: 417030
Installation length EL = up to 800mm
Article no.: 417040
AxisTubeLoad bearing capacity per rollerMaterial
Ø 8mmØ 40mm
Max. 150 N
Anodised aluminium
Roller length according to customer wishes, please quote when ordering:
AL =RL =EL =
mmmm mm
ROLLERS FOR ROLLER TRACK slot 8
65
76
Ø 20,25
M8
40
L
Clamping lever M8x12 Article no.: 370500
Clamping lever M8x16 Article no.: 370505
Clamping lever M8x20 Article no.: 370510
Clamping lever M8x25 Article no.: 370520
Clamping lever M8x40 Article no.: 370530
Clamping lever M8x55 Article no.: 370540
Material Lever: Thermoplastic, thread: Steel galvanised
CLAMPING LEVER WITH RELEASE KNOB
ACCESSORIES SERIES 40
2.43
ASK - Strong Technology. High Standards. www.askgmbh.com
15
20
5
Ø 6,20
426004
426005
426010
426030
426007
426020
426040
9
40
SW 14
Ø 8,3
50
80
22,5
6
7
30
Ø 8,3
SW 14
Ø 8,3
40
309
15
20
5
Ø 6,20
22,5
6
7
30
Ø 8,3
SW 14
Ø 8,3
40
309
9
40
SW 14
Ø 8,3
50
80
JOINT 20 × 20 slot 5
20 x 20 Article no.: 426004
Slot Material
5mmZinc die cast,
powder-coated
JOINT 30 × 30 slot 6
30 x 30 Article no.: 426005
30 x 30 with clamping lever Article no.: 426007
SlotMaterial
6mmZinc die cast,
powder-coated
JOINT 40 × 40 slot 8
40 x 40 Article no.: 426010
40 x 40 with clamping lever Article no.: 426020
SlotMaterial
8mmZinc die cast,
powder-coated
JOINT 40 × 80 slot 8
40 x 80 Article no.: 426030
40 x 80 with clamping lever Article no.: 426040
SlotMaterial
8mmZinc die cast,
powder-coated
ACCESSORIES SERIES 40
2.44
All joints without clamping lever, except 426004 and 426030,can not be clamped by tightening the screws.
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
415030
Ø 8,1
Ø 8,2
R 50 R 65
22,5
8,15
15,85
100130
306,32,5
SWIVEL FASTENING slot 8
Article no.: 415030
Slot Material
8mm / 8mmSteel galvanised
ACCESSORIES SERIES 40
2.45
ASK - Strong Technology. High Standards. www.askgmbh.com
413040
413046
7
5
14
413050 413060
67
9,1
0,8
11,8
18
5
413050 413060
8
11
9,40,7
8
11
9,40,7
56
6,30
0,6
COVER AND CLOSURE PROFILE slot 5
Slot 5 black Article no.: 413035
LengthPanel thicknessesMaterial
2000mm1-3mmPP+TPE
COVER AND CLOSURE PROFILE slot 6
Slot 6 black Article no.: 413040
LengthPanel thicknessesMaterial
2000mm2-4mmPP+TPE
COVER AND CLOSURE PROFILE slot 8
Slot 8 black Article no.: 413045
Slot 8 transparent Article no.: 413046
LengthPanel thicknessesMaterial
2000mm4-6mmPP+TPE
COVER AND CLOSURE PROFILE slot 8
Slot 8 transparent Article no.: 413047
LengthPanel thicknessesMaterial
2000mm0,8-3mm
PP+TPE
SEALING PROFILE slot 8
Sealing profile 4-6Panel thicknesses
Article no.: 4130504-6mm
Sealing profile 4-6Panel thicknesses
Article no.: 4130602-4mm
Length Material
Rolled goodsTPE black
ACCESSORIES SERIES 40
2.46
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
FASTENING OF SURFACE ELEMENTS slot 5|slot 6|slot 8
Clamping block 411015 8mm L1 - 11mm
Closure profile
413035413040413045413046413047
5mm6mm8mm8mm8mm
L1 + 10mmL1 + 18mmL1 + 21mmL1 + 21mmL1 + 21mm
Sealing profile 413050413060
8mm8mm
L1 + 21mmL1 + 23mm
Without (directly in the slot)
5mm6mm8mm
L1 + 11mmL1 + 18mmL1 + 22mm
Also sealing profile
FASTENING ELEMENT ARTICLE NO. SLOT L2 COMMENT
ACCESSORIES SERIES 40
2.47
ASK - Strong Technology. High Standards. www.askgmbh.com
411065
411075
411065
Slot 5 M4 Article no.: 411062
Slot 6 M5 Article no.: 411064
Slot 8 M6 Article no.: 411065
Slot 8 M6Slot 8 M6 with captive screw, incl. O-ring, dimensions identical to 411 065
Article no.: 411075
Material Plastic PA glass fibre reinforced
MULTI-UNIBLOCK slot 5|slot 6|slot 8
ACCESSORIES SERIES 40
1112,25
12
5
2
12
M4
5,5
13,515
,5
3
6
18 15
M5
7
821
,524
20
5
20
M6
10
411065 / 411075
411064
411062
2.48
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
L2
L1
FASTENING OF SURFACE ELEMENTS s5|s6|s8
Multi-Uniblock 411062411064411065
5mm6mm8mm
L1 - 2mm
FASTENING ELEMENT ART.NO. SLOT L2
5
19,50
8
4,521
18
22
CLAMPING BLOCK slot 8Slot 8 Article no.: 411015
Panel thicknessesMaterial
1-9mmPlastic PA,
glass fibre reinforced
ACCESSORIES SERIES 40
2.49
ASK - Strong Technology. High Standards. www.askgmbh.com
413 070
20
10
A
A2
4,5
11
SCHNITT A-A40
32,6
4,58
2016
39
20
8 4,5
35
16
9,15
5,3
8
6,6
7,9
4
9,1
CROSS-CABLE TIE BLOCK slot 8Slot 8 Article no.: 412015
Material Plastic PA glass fibre reinforced
CABLE CARRIER WITH DIVIDER slot 8Slot 8 Article no.: 412017
Material Plastic PA glass fibre reinforced
CABLE CARRIER WITHOUT DIVIDER slot 8Slot 8 Article no.: 412019
Material Plastic PA glass fibre reinforced
COVER PROFILE PLASTIC slot 8Black Article no.: 413070
Light grey Article no.: 413075
SlotLengthMaterial
8mm2000mmPlastic PP
COVER PROFILE ALUMINIUM slot 8Slot 8 Article no.: 413090
LengthMaterial
2000mmAnodised aluminium
ACCESSORIES SERIES 40
2.50
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
31,5
139
4
13,5
413155
413150
17,7
25,5
Ø 6,8
50 40 60
1
25,5
17,7Ø 6,8
50 40 60
Slot 8 | Rolled goods 32 x 4 mm
Article no.: 413080
Material Plastic, NBR black
Symmetrical system slide Article no.: 413150
Asymmetrical system slide Article no.: 413155
Material Plastic PA
74,1
40
R54,7
14,7 1,5 Article no.: 413095
MassLength max.Material
0,55 kg/m6000mm
Anodised aluminium
Article no.: 421059
Material PA, black
Article no.: 413091
MaterialRecommended quantity per m
Steel galvanised5 pieces per m
14,7
4
74
9,3
20
13
COVER PROFILE RUBBER slot 8
FASTENING OF SURFACE ELEMENTS slot 8
COVER PROFILE R80 ALUMINIUM
COVER CAP R80 PLASTIC
CLIP
ACCESSORIES SERIES 40
2.51
ASK - Strong Technology. High Standards. www.askgmbh.com
b
a
CABLE DUCTS ALUMINIUM | SERIES 40
c
b
a
Cable duct 40 x 40a=40mm, b=37mm, c=35,5mm
Article no.: 511010
Cable duct 40 x 80a=80mm, b=77mm, c=35,5mm
Article no.: 511020
Cable duct 80 x 80a=80mm, b=75mm, c=75mm
Article no.: 511030
Cable duct 80 x 120a=120mm, b=115mm, c=75mm
Article no.: 511035
Cable duct 80 x 160a=160mm, b=115mm, c=75mm
Article no.: 511040
Length max.Material
3000 mmAnodised aluminium
ALUMINIUM CABLE DUCT
Cover 40a=40mm, b=10,5mm
Article no.: 511050
Cover 80a=80mm, b=10,5mm
Article no.: 511060
Cover 120a=120mm, b=10,5mm
Article no.: 511065
Cover 160a=160mm, b=10,5mm
Article no.: 511070
Length max.Material
3000mmAnodised aluminium
COVER FOR ALUMINIUM CABLE DUCT
2.52
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
2 4
a
b
Ø 8,5Ø 4,5
CABLE DUCTS ALUMINIUM | SERIES 40
Cover cap 40 x 40a=40mm, b=40mm
Article no.: 511080
Cover cap 40 x 80a=40mm, b=80mm
Article no.: 511090
Cover cap 80 x 80a=80mm, b=80mm
Article no.: 511100
Cover cap 80 x 120a=80mm, b=120mm
Article no.: 511105
Cover cap 80 x 160a=80mm, b=160mm
Article no.: 511110
Material Plastic, PA black
COVER CAPS FOR CABLE DUCT
SCREW FOR COVER CAP DIN 7981 4,2 x 9,5
Sheet metal screw Article no.: 370305
DimensionsMaterial
4,2 x 9,5mmGalvanised steel
2.53
ASK - Strong Technology. High Standards. www.askgmbh.com
501350
501330
501283
BASE ELEMENTS SERIES 40
PLASTIC PLATE WITH MOUNTING HOLES incl. rubber plate Plate Ø 80 with mounting holes
Article no.: 501350
Hole circle (LK)Material
55mm,Plastic PA
glass fibre reinforced
Plate Ø 30 Article no.: 501300
Plate Ø 40 Article no.: 501310
Plate Ø 40 Article no.: 501313
Plate Ø 50 Article no.: 501320
Plate Ø 50 Article no.: 501325
Plate Ø 60 Article no.: 501330
Plate Ø 60 Article no.: 501335
Plate Ø 80 Article no.: 501345
Material Plastic PA glass fibre reinforced
PLASTIC PLATE incl. rubber plate
Conductive material design per DIN EN 61340-5-1; suitable for use in ESD protected zones.
TRAPEZOIDAL PLATE, zinc die cast incl. rubber plate Plate Ø 60 H=18 Article no.: 501283
Plate Ø 80 H=20 Article no.: 501285
Plate Ø 80 with bore H=20 Article no.: 501286
Material Zinc die cast, powder-coated black
2.54
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
501365
501400
501460
230
20
Ø 20
Ø 17
M12
BASE ELEMENTS SERIES 40
Ø15
M
LSW
M8 x L35 | SW14 Article no.: 501365
M8 x L80
Article no.: 501370
M10 x L70 | SW14
Article no.: 501380
M10 x L90 Article no.: 501390
M12 x L55 | SW14
Article no.: 501400
M12 x L100
Article no.: 501410
M12 x L125
Article no.: 501420
M12 x L150 Article no.: 501430
M16 x L115 | SW17 Article no.: 501450
M16 x L150 Article no.: 501460
Material Steel galvanised
THREADED ROD WITH BALL FOR ARTICULATED FOOT
THREADED SLEEVE Threaded sleeve Ø 20 Article no.: 502185
MaterialApplication
Steel, galvanisedFastening
of adjustable feet
Conductive material design per DIN EN 61340-5-1; suitable for use in ESD protected zones.
2.55
CLAMPING PLATE Dimensions in mm A B C D H L
Article no.: 99900174for trapezoidal plate Ø 60
50 56 38 12 18 110
Article no.: 501288for trapezoidal plate Ø 80
70 76,5 48 14 20 150
Material Zinc die cast, powder-coated black
L
CA
B
Ø D
AA
45 °
H
ASK - Strong Technology. High Standards. www.askgmbh.com
Ø D
a
M
501011
501012
501017
Articulated foot Ø D44 M12x85DimensionsMax. load.
Article no.: 501011
a = 85 mm10 000 N
Articulated foot Ø D58 M12x85DimensionsMax. load..
Article no.: 501012a = 85 mm10 000 N
Articulated foot Ø D44 M16x145DimensionsMax. load.
Article no.: 501013a = 145 mm
20 000 N
Articulated foot Ø D90 M16x85DimensionsMax. load.
Article no.: 501014a = 85 mm20 000 N
Articulated foot Ø D90 M16x145DimensionsMax. load.
Article no.: 501015a = 145 mm
20 000 N
Articulated foot Ø D90 M16x200DimensionsMax. load.
Article no.: 501016a = 200 mm
20 000 N
Material Galvanised steel
ARTICULATED FOOT, STEEL
Damping ring Ø 44D1D2
Article no.: 50101752 mm44 mm
Damping ring Ø 58D1D2
Article no.: 50101866 mm58 mm
Damping ring Ø 90D1D2
Article no.: 50101998 mm90 mm
Material Natural PUR
DAMPING RING FOR ARTICULATED FOOT
A A
Ø D2
Ø D1
4 10
SCHNITT A-A
Conductive material design per DIN EN 61340-5-1; suitable for use in ESD protected zones.
BASE ELEMENTS SERIES 40
2.56
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
2
Ø -D-
b
-M-
a
2
Ø -D-
ab
-M-
Combination foot Ø D40 M8 x 35DimensionsMax. load
Article no.: 501500
a = 32 mm, b = 67 mm3500 N
Combination foot Ø D40 M10 x 70DimensionsMax. load
Article no.: 501610
a = 32 mm, b = 102 mm7700 N
Combination foot Ø D60 M10 x 70DimensionsMax. load.
Article no.: 501620
a = 32 mm, b = 102 mm7700 N
Combination foot Ø D80 M10 x 70DimensionsMax. load
Article no.: 501630
a = 32 mm, b = 102 mm7700 N
Combination foot Ø D80 M16 x 115DimensionsMax. load
Article no.: 501550
a = 32 mm, b = 147 mm14 500 N
Scope of delivery
Material
inkl. threaded rod, plastic plate and rubber plate
Threaded rod, galvanised steel; Plate, plastic PA
glass fibre reinforced
ASK COMBINATION FOOT
501610
501550
BASE ELEMENTS SERIES 40
2.57
ASK - Strong Technology. High Standards. www.askgmbh.com
30x60 M8 t=12 (W x L)
Article no.: 503223
30x60 M10 t=16 (W x L)
Article no.: 503225
40x80 M10 t=16 (W x L)
Article no.: 503227
40x80 M12 t=16 (W x L)
Article no.: 503229
40x80 M16 t=16 (W x L)
Article no.: 503232
80x80 M10 t= 16 (W x L)
Article no.: 503238
80x80 M12 t=16 (W x L)
Article no.: 503241
80x80 M16 t=16 (W x L)
Article no.: 503251
Material
Screws(Not included in the scope of supply!)
Zinc die cast, powder-coated black
DIN7984 M8x25 (40x80/80x80) or
DIN912 M6x20 (30x60)
503223
503251
A-A
L
B
A A
t
M6 (DIN 912) bzw. M8 (DIN7984)
M
BASE PLATES (with thread for articulated feet)
BASE ELEMENTS SERIES 40
2.58
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
504010
60
20
20
160
A
A
8
40
8,2
27,5
11A-A
504040
STEEL FOUNDATION BRACKET 42 x 160 Article no.: 504005
32 x 200 Article no.: 504010
Material Steel galvanised
FOUNDATION BRACKET ZINC DIE CAST 40 x 160 Article no.: 504040
Material Zinc die cast, powder-coated black
Conductive material design per DIN EN 61340-5-1; suitable for use in ESD protected zones.
BASE ELEMENTS SERIES 40
5252
78
130
182
39
3
9
21
150
52
31
14
200
61
87
29
18
13
107
10
1155
160
80
135
3131
42
9
4
22.5
61,5
90
13
31
19.5
9
504010
504005
2.59
ASK - Strong Technology. High Standards. www.askgmbh.com
504055
504050
5
55
170
4390
45
55
155
120
55
Ø 9
8,5 (4
x)3 (4x)
26,75
90
25
4039
3940
16
18
18
16
Ă9
135
135
26,75
90
25
155
30°
Ø 10,2R 5,1010 10
1227
Ø 8,5
100
73,5
5
75
62
UNIVERSAL FLOOR SUPPORT slot 8Universal floor support straight variant
Article no.: 504050
Scope of supply
Material
Floor support without fastening kit
Steel galvanised
UNIVERSAL FLOOR SUPPORT slot 8Universal floor support corner variant
Article no.: 504055
Scope of supply
Material
Floor support without fastening kit
Steel galvanised
FASTENING BRACKET for telescopic support Fastening bracket for telescopic profile 54x86(Article no.: 201120, page 1.16)
Article no.: 504060
Material Steel galvanised
Conductive material design per DIN EN 61340-5-1; suitable for use in ESD protected zones.
BASE ELEMENTS SERIES 40
2.60
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
HINW
EIS:
Säm
tliche
Infor
matio
nen,
die in
dies
em D
okum
ent e
nthalt
en si
nd, s
ind S
TREN
G VE
RTRA
ULIC
H. Je
der E
mpfän
ger
diese
s Dok
umen
ts da
rf die
darin
entha
ltene
n Info
rmati
onen
, dire
kt od
er in
direk
t, nur
mit a
ussc
hlies
slich
er, s
chrift
liche
rZu
stimm
ung d
er F
irma A
SK an
Dritt
e weit
erge
ben o
der o
ffenle
gen.
Die F
irma A
SK be
hält s
ich al
le Re
chte
in Be
zug
auf U
rheb
erre
chtsg
esetz
, Pate
nt- un
d Geb
rauc
hsmu
stersc
hutz
vor.
Lizen
zrech
te we
rden
hier
durch
nich
t erte
ilt.
NOTE
: The
infor
matio
n or m
ateria
l con
taine
d in t
his do
cume
nt is
STRI
CTLY
CON
FIDE
NTIA
L and
any r
ecipi
ent
of thi
s doc
umen
t sha
ll not
disclo
se or
divu
lge, d
irectl
y or in
direc
tly, th
is do
cume
nt or
the i
nform
ation
or m
ateria
lco
ntaine
d her
ein w
ithou
t the w
ritten
cons
ent o
f the c
ompa
ny A
SK. A
ll cop
yrigh
ts, tr
adem
arks
, pate
nts an
d othe
rrig
hts in
conn
ectio
n her
ewith
are e
xpre
ssly
rese
rved t
o the
comp
any A
SK an
d no l
icens
e is c
reate
d her
eby.
Auftragsnummer
DIN ISO 2768 T1 - mDIN ISO 2768 T2 - K
sieheZeichnung
Werkstückkanten
sieheZeichnung
OberflächeAllgemeintoleranzen
Name
NormGepr.Bearb.
DatumBeschreibung
Abmessungen
Masse
Behandlung
Material
Zeichnungsnummer - Dokumentname
Bl.
Blatt
Maßstab
Zust Änderung Datum Name
Art.-Nr. ASK:
Ursp.: Ers.f.:
SolidWorks, DIN A4
504090 Bodendübel Ø8_Bef.-Darstellung11
1:1
M
b
e
a
c d
ANCHOR BOLT Anchor bolt Ø 8 / M8 a= Hole depth b= Effective anchoring depthc= Fastening heightd= Thread lengthe= Total height
Article no.: 50409055 - 65 mm35 - 44 mm15 - 24 mm
45 mm80 mm
Anchor bolt Ø 10 / M8a= Hole depth b= Effective anchoring depthc= Fastening heightd= Thread lengthe= Total height
Article no.: 50409565 - 70 mm42 - 48 mm15 - 21 mm
45 mm90 mm
Material Galvanised steel
BASE ELEMENTS SERIES 40
2.61
ASK - Strong Technology. High Standards. www.askgmbh.com
Ø 75
normal ESD
Brake Unbrak. Brake Unbrak.
Ø D2 = 11mm 510180 510190 510110 510120
Ø D2 = 12,5mm 502111 502121 502051 502061
Load bearing capacity
750 N
a 24 mm
b 100 mm
c 25 mm
Ø D 75 mm
800 N
43,5 mm I 38 mm I 43,5 mm I 38 mm
135 mm
32 mm
100 mm
1000 N
41 mm
160 mm
32 mm
125 mm
a
Ø D
b
c
Ø D2
a
ØD
b
c
Ø D2
510150510210
WHEELS AND CASTERS FOR SERIES 40
Brake Unbrak. Brake Unbrak.
510210 510220 510140 510150
502125 502126 502063 502064
Ø 100
normal ESD
Ø 125
normal ESD
Brake Unbrak. Brake Unbrak.
510223 510224 510152 510154
502130 502140 502070 502080
Conductive material design per DIN EN 61340-5-1; suitable for use in ESD protected zones.
CASTERS WITH BOLT HOLE
2.62
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
Brake Unbrak. Brake Unbrak.
510223 510224 510152 510154
502130 502140 502070 502080
82
36,5
22 Ø71
46
97
WHEELS AND CASTERS FOR SERIES 40
LIFTING CASTER Article no.: 502200
Load bearing capacity
Scope of supply
Function
Material
2000N
incl. fastening kit
Adjustable with levelling spindle max.10mm
over caster level (without tools)
Housing: Die cast aluminium,
powder-coated; Roller: Polyamide PA6
Fixed caster: Aluminium, rubber
CASTER LIFTING WHEEL Article no.: 502210
Load bearing capacityFunction
Material
2300 NWheel easily turns into a
stable base by engaging the stop lever
Wheel: PA 6, natural whiteHousing: Galvanised steel
Base plate: Galvanised steel with rubber insert
118
Ø80
7680
5560
9
12,2
MOUNTING PLATE Article no.: 502215
Function
Material
Mounting plate for caster lifting wheel
(502210)
Galvanised steel
0 20 42,50
60 65 77,50
125
160
180
0
20
42,5
60
65
77,50
125
160
180
45°
70
70
21
8,7
A
A
Ø 15
Ø 9
8,6
M 8
12
SCHNITT A-A
2.63
ASK - Strong Technology. High Standards. www.askgmbh.com
Ø 75
normal ESD
Brake Unbrak. Brake Unbrak.
Swivel caster with screw-on plate
510010 510020 510060 510070
Fixed caster with screw-on plate
510201 510130
Load bearing capacity
750 N
Dimensions
a 25 mm
b 100 mm
c 48 mm
d 38 mm
e 25 mm
f 48 mm
g 38 mm
h 6,3 mm
i 60 mm
j 60 mm
ØD 75 mm
Brake Unbrak. Brake Unbrak.
510040 510050 510090 510100
510203 510153
800 N
43,5 mm | 38mm | 43,5 mm| 38 mm
135 mm
51,5 mm
46,5 mm
32 mm
61,5 mm
56 mm
8,5 mm
77 mm
67 mm
100 mm
Brake Unbrak. Brake Unbrak.
502030 502035 502045 502047
502145 502083
1000 N
41 mm
160 mm
51,5 mm
46,5 mm
32 mm
61,5 mm
56 mm
8,5 mm
77 mm
67 mm
125 mm
CASTERS WITH SCREW-ON PLATE Ø 100
normal ESD
Ø 125
normal ESD
FASTENING KITS FOR WHEELS AND CASTERS Fastening kit for casters Ø 75 with bolt hole in slot 10 Article no.: 502165
Fastening kit for casters Ø 100 | Ø 125 with bolt hole Ø 12.5 in core hole Article no.: 502170
Fastening kit for casters with screw-on plate (please cite profile) Article no.: 502180
WHEELS AND CASTERS FOR SERIES 40
Conductive material design per DIN EN 61340-5-1; suitable for use in ESD protected zones.
2.64
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com
Brake Unbrak. Brake Unbrak.
502030 502035 502045 502047
502145 502083
1000 N
41 mm
160 mm
51,5 mm
46,5 mm
32 mm
61,5 mm
56 mm
8,5 mm
77 mm
67 mm
125 mm
100
Ø75
25
67
604840
48
40
6,3
Ø 100
135
67
51,5
46,5
7761,5
56
8,5
32
Ø 125
160
6751,546,5
7761,55632
8,5
510153
510090
502035
a
Ø D
b
e
f
g
i
cd j
h
a
b
Ø D
f
g
i
d c j
h
e
CASTERS WITH SCREW-ON PLATE
FIXED CASTERS WITH SCREW-ON PLATE
WHEELS AND CASTERS FOR SERIES 40
2.65
ASK - Strong Technology. High Standards. www.askgmbh.com
502038 502038
502039 502039
502148 502148
60
Ø 160
200
7840
105
140
110
11
14
60
Ø 160
200
78
140
105
110
11
14
40
Ø 160
200
120
40
105
140
75 114
Ø 12
HEAVY DUTY CASTER WITH SCREW-ON PLATE Ø 160 With brake Article no.: 502038
Dynamic bearing capacityStatic bearing capacityNet weightTemperature rangeRunning surface hardness
4000 N8000 N2363g
-40°C / +80°CShore D60
HEAVY DUTY CASTER WITH SCREW-ON PLATE Ø 160 Without brake Article no.: 502039
Dynamic bearing capacityStatic bearing capacityNet weightTemperature rangeRunning surface hardness
4000 N8000 N2025g
-40°C / +80°CShore D60
FIXED CASTER HEAVY DUTY WITHOUT BRAKE Ø 160 Fixed caster without brake Article no.: 502148
Dynamic bearing capacityStatic bearing capacityNet weightTemperature rangeRunning surface hardness
4000 N8000 N1573 g
-40°C / +80°CShore D60
WHEELS AND CASTERS FOR SERIES 40
2.66
www.askgmbh.com ASK - Strong Technology. High Standards. ASK - Strong Technology. High Standards. www.askgmbh.com 2.67
Recommended