View
7
Download
0
Category
Preview:
Citation preview
Contents
Motorcycle Safety P. 2
Operation Guide P. 18
Maintenance P. 114
Troubleshooting P. 178
Information P. 199
Specifications P. 223
Index P. 227
20170830152249_31MKF6100_enu_BOOK Page 4 Wednesday, August 30 2017 15:45:50 JST
CBR1000RR/RA/S1/S231MKF610 MOM 16398 (1706)
WelcomeCongratulations on your purchase of a newHonda motorcycle. Your selection of aHonda makes you part of a worldwide familyof satisfied customers who appreciateHonda's reputation for building quality intoevery product.
To ensure your safety and riding pleasure:● Read this owner's manual carefully.● Follow all recommendations and
procedures contained in this manual.● Pay close attention to safety messages
contained in this manual and on themotorcycle.
To protect your investment, we urge you totake responsibility for keeping yourmotorcycle well serviced and maintained.Also, observe the break-in guidelines, andalways perform the pre-ride inspection andother periodic checks in this manual.
When service is required, remember thatyour Honda dealer knows your motorcyclebest. If you have the required mechanical“know-how” and tools, you can purchase anofficial Honda Service Manual to help youperform many maintenance and repair tasks.2 P. 217
Read the warranty information thoroughly sothat you understand the warranty coverageand that you are aware of your rights andresponsibilities. 2 P. 218
You may also want to visit our website atwww.powersports.honda.com.Canada www.honda.ca.Happy riding!
20170830152249_31MKF6100_enu_BOOK Page 2 Wednesday, August 30 2017 15:45:50 JST
A Few Words About SafetyYour safety, and the safety of others, is veryimportant. Operating this motorcycle safely isan important responsibility.To help you make informed decisions aboutsafety, we have provided operatingprocedures and other information on safetylabels and in this manual. This informationalerts you to potential hazards that couldhurt you or others.Of course, it is not practical or possible towarn you about all hazards associated withoperating or maintaining a motorcycle. Youmust use your own good judgment.
You will find important safety information in avariety of forms, including:● Safety labels on the motorcycle● Safety Messages preceded by a safety alert
symbol and one of three signal words:DANGER, WARNING, or CAUTION.These signal words mean:
3DANGERYou WILL be KILLED or SERIOUSLYHURT if you don’t follow instructions.
3WARNINGYou CAN be KILLED or SERIOUSLYHURT if you don’t follow instructions.
3CAUTIONYou CAN be HURT if you don’t followinstructions.
Other important information isprovided under the following titles:
NOTICE Information to help you avoiddamage to your motorcycle,other property, or theenvironment.
20170830152249_31MKF6100_enu_BOOK Page 3 Wednesday, August 30 2017 15:45:50 JST
Safety Guidelines .................................................P. 3Safety Labels.........................................................P. 8Safety Precautions.............................................P. 10Riding Precautions ............................................P. 12Accessories & Modifications...........................P. 16Loading ................................................................P. 17
20170830152249_31MKF6100_enu_BOOK Page 5 Wednesday, August 30 2017 15:45:50 JST
This section contains important information for safe riding of your motorcycle.Please read this section carefully.
Motorcycle Safety
Safety GuidelinesFollow these guidelines to enhance your safety:● Perform all routine and regular inspections
specified in this manual.● Stop the engine and keep sparks and flame
away before filling the fuel tank.● Do not run the engine in enclosed or partly
enclosed areas. Carbon monoxide inexhaust gases is toxic and can kill you.
Always Wear a HelmetIt's a proven fact: helmets and protectiveapparel significantly reduce the number andseverity of head and other injuries. So alwayswear an approved motorcycle helmet andprotective apparel. 2 P. 10
Before RidingMake sure that you are physically fit, mentallyfocused and free of alcohol and drugs.CBR1000RR/RACheck that you and your passenger are bothwearing an approved motorcycle helmet andprotective apparel. Instruct your passenger onholding onto the seat strap or your waist,leaning with you in turns, and keeping their feeton the footpegs, even when the motorcycle isstopped.CBR1000S1/S2Check that you are wearing an approvedmotorcycle helmet and protective apparel.
20170830152249_31MKF6100_enu_BOOK Page 6 Wednesday, August 30 2017 15:45:50 JST
Safety GuidelinesM
otorcycle Safety
3Continued
Take Time to Learn & PracticeEven if you have ridden other motorcycles,practice riding in a safe area to become familiarwith how this motorcycle works and handles,and to become accustomed to the motorcycle'ssize and weight.
We recommend that all riders take a certifiedcourse approved by the Motorcycle SafetyFoundation (MSF). New riders should start withthe basic course, and even experienced riderswill find the advanced course beneficial.For information about the MSF training coursenearest you, call the national toll-free number:(800) 446-9227.
USA Other riding tips can be found in the Youand Your Motorcycle Riding Tips booklet thatcame with your motorcycle.
Ride DefensivelyAlways pay attention to other vehicles aroundyou, and do not assume that other drivers seeyou. Be prepared to stop quickly or perform anevasive maneuver.
Make Yourself Easy to SeeMake yourself more visible, especially at night,by wearing bright reflective clothing, positioningyourself so other drivers can see you, signalingbefore turning or changing lanes, and usingyour horn when necessary.
20170830152249_31MKF6100_enu_BOOK Page 7 Wednesday, August 30 2017 15:45:50 JST
Safety Guidelines
Motorcycle Safety
4
Ride within Your LimitsNever ride beyond your personal abilities orfaster than conditions warrant. Fatigue andinattention can impair your ability to use goodjudgment and ride safely.
Never Carry a passengerCBR1000S1/S2There are no handholds, seat, or footrests tocarry a passenger.
Don't Drink and RideAlcohol and riding don't mix. Even one alcoholicdrink can reduce your ability to respond tochanging conditions, and your reaction timegets worse with every additional drink. Don'tdrink and ride, and don't let your friends drinkand ride either.
Keep Your Honda in Safe ConditionIt's important to keep your motorcycle properlymaintained and in safe riding condition.Inspect your motorcycle before every ride andperform all recommended maintenance. Neverexceed load limits (2 P. 17), and do not modifyyour motorcycle or install accessories thatwould make your motorcycle unsafe (2 P. 16).
20170830152249_31MKF6100_enu_BOOK Page 8 Wednesday, August 30 2017 15:45:50 JST
Safety GuidelinesM
otorcycle Safety
5Continued
If You are Involved in a CrashPersonal safety is your first priority. If you oranyone else has been injured, take time toassess the severity of the injuries and whether itis safe to continue riding. Call for emergencyassistance if needed. Also follow applicable lawsand regulations if another person or vehicle isinvolved in the crash.
If you decide to continue riding, first turn theignition switch to the OFF position, and evaluatethe condition of your motorcycle. Inspect forfluid leaks, check the tightness of critical nutsand bolts, and check the handlebars, controllevers, brakes, and wheels. Ride slowly andcautiously.Your motorcycle may have suffered damagethat is not immediately apparent. Have yourmotorcycle thoroughly checked at a qualifiedservice facility as soon as possible.
Lithium-Ion (Li-Ion) BatteryCBR1000S1/S2If you smell an unusual odor coming from thelithium-ion (li-ion) battery, park your motorcyclein a safe place outside and away fromflammable objects, then turn the ignition switchto the OFF position. Have your motorcycleinspected by your dealer immediately.
20170830152249_31MKF6100_enu_BOOK Page 9 Wednesday, August 30 2017 15:45:50 JST
Safety Guidelines
Motorcycle Safety
6
Carbon Monoxide HazardExhaust contains poisonous carbon monoxide, acolorless, odorless gas. Breathing carbonmonoxide can cause loss of consciousness andmay lead to death.
If you run the engine in confined or even partlyenclosed area, the air you breathe couldcontain a dangerous amount of carbonmonoxide.
Never run your motorcycle inside a garage orother enclosure.
3WARNINGRunning the engine of your motorcyclewhile in an enclosed or even partiallyenclosed area can cause a rapid build-up of toxic carbon monoxide gas.
Breathing this colorless, odorless gascan quickly cause unconsciousness andlead to death.
Only run your motorcycle's enginewhen it is located in a well ventilatedarea outdoors.
20170830152249_31MKF6100_enu_BOOK Page 10 Wednesday, August 30 2017 15:45:50 JST
Safety GuidelinesM
otorcycle Safety
7
Safety LabelsSafety and information labels on yourmotorcycle provide important safetyinformation and may warn you of potentialhazards that could cause serious injury. Readthese labels carefully and don't remove them.
If a label comes off or becomes hard to read,contact your dealer for a replacement.
20170830152249_31MKF6100_enu_BOOK Page 11 Wednesday, August 30 2017 15:45:50 JST
Safety Labels
Motorcycle Safety
8
20170830152249_31MKF6100_enu_BOOK Page 12 Wednesday, August 30 2017 15:45:50 JST
Safety LabelsM
otorcycle Safety
9
CBR1000S1/S2
CBR1000S1/S2
CBR1000RR/RA
CBR1000RR/RA
Safety Precautions● Ride cautiously and keep your hands on the
handlebars and feet on the footpegs.● CBR1000RR/RA
Keep passenger’s hands onto the seat strapor your waist, passenger’s feet on thefootpegs while riding.
● CBR1000RR/RAAlways consider the safety of yourpassenger, as well as other drivers andriders.CBR1000S1/S2Always consider the safety of other driversand riders.
Protective ApparelCBR1000RR/RAMake sure that you and any passenger arewearing an approved motorcycle helmet, eyeprotection, and high-visibility protectiveclothing. Ride defensively in response toweather and road conditions.CBR1000S1/S2Make sure that you are wearing an approvedmotorcycle helmet, eye protection, and high-visibility protective clothing. Ride defensively inresponse to weather and road conditions.
# HelmetShould be safety-standard certified, high-visibility, and correct size for your head● Must fit comfortably but securely, with the
chin strap fastened.● Face shield with unobstructed field of vision
or other approved eye protection
20170830152249_31MKF6100_enu_BOOK Page 13 Wednesday, August 30 2017 15:45:50 JST
Safety Precautions
Motorcycle Safety
10
USA Look for a DOT (Department ofTransportation) certification label on any helmetyou buy.CBR1000RR/RA
3WARNINGNot wearing a helmet increases thechance of serious injury or death in acrash.
Make sure that you and any passengeralways wear an approved helmet andprotective apparel.
CBR1000S1/S2
3WARNINGNot wearing a helmet increases thechance of serious injury or death in acrash.
Make sure that you always wear anapproved helmet and protectiveapparel.
# GlovesFull-finger leather gloves with high abrasionresistance
# Boots or Riding ShoesSturdy boots with non-slip soles and ankleprotection
# Jacket and PantsProtective, highly visible, long-sleeved jacketand durable long pants for riding (or aprotective suit)
20170830152249_31MKF6100_enu_BOOK Page 14 Wednesday, August 30 2017 15:45:50 JST
Safety PrecautionsM
otorcycle Safety
11
Riding PrecautionsBreak-in Period
During the first 300 miles (500 km) of running,follow these guidelines to ensure yourmotorcycle's future reliability and performance.● Avoid full-throttle starts and rapid
acceleration.● Avoid hard braking and rapid down-shifts.● Ride conservatively.
BrakesObserve the following guidelines:● Avoid excessively hard braking and
downshifting.u Sudden braking can reduce the
motorcycle's stability.u Where possible, reduce speed before
turning; otherwise you risk sliding out.
● Exercise caution on low traction surfaces.u The tires slip more easily on such
surfaces and braking distances arelonger.
● Avoid continuous braking.u Repeated braking, such as when
descending long, steep slopes canseriously overheat the brakes, reducingtheir effectiveness. Use engine brakingwith intermittent use of the brakes toreduce speed.
● For full braking effectiveness, operate boththe front and rear brakes together.
20170830152249_31MKF6100_enu_BOOK Page 15 Wednesday, August 30 2017 15:45:50 JST
Riding Precautions
Motorcycle Safety
12
# Anti-lock Brake System (ABS)CBR1000RA/S1/S2This model is equipped with an Anti-lock BrakeSystem (ABS) designed to help prevent thebrakes from locking up during hard braking.The ABS functions with information provided bythe IMU (Inertia Measurement Unit).● ABS does not reduce braking distance. In
certain circumstances, ABS may result in alonger stopping distance.
● ABS does not function at speeds below 4mph (6 km/h).
● The brake lever and pedal may recoil slightlywhen applying the brakes. This is normal.
● Always use the recommended front/reartires and sprockets to ensure correct ABSoperation.
# Engine BrakingEngine braking helps slow your motorcycledown when you release the throttle. For furtherslowing action, downshift to a lower gear. Useengine braking with intermittent use of thebrakes to reduce speed when descending long,steep slopes.
# Wet or Rainy ConditionsRoad surfaces are slippery when wet, and wetbrakes further reduce braking efficiency.Exercise extra caution when braking in wetconditions.If the brakes get wet, apply the brakes whileriding at low speed to help them dry.
20170830152249_31MKF6100_enu_BOOK Page 16 Wednesday, August 30 2017 15:45:50 JST
Riding PrecautionsM
otorcycle Safety
13Continued
Parking● Park on a firm, level surface.● If you must park on a slight incline or loose
surface, park so that the motorcycle cannotmove or fall over.
● Make sure that high-temperature partscannot come into contact with flammablematerials.
● Do not touch the engine, muffler, brakesand other high-temperature parts until theycool down.
● To reduce the likelihood of theft, always lockthe handlebars and remove the key whenleaving the motorcycle unattended.Use of an anti-theft device is alsorecommended.
# Parking with the Side Stand1. Stop the engine.2. Push the side stand down.
3. Slowly lean the motorcycle to the left until itsweight rests on the side stand.
4. Turn the handlebars fully to the left.u Turning the handlebars to the right
reduces stability and may cause themotorcycle to fall.
5. Turn the ignition switch to the LOCKposition and remove the key. 2 P. 100
Refueling and Fuel GuidelinesFollow these guidelines to protect the engine,fuel system and catalytic converter:● Use only unleaded gasoline.● Use recommended octane number. Using
lower octane gasoline will result indecreased engine performance.
● Do not use fuels containing a highconcentration of alcohol. 2 P. 216
● Do not use stale or contaminated gasolineor an oil/gasoline mixture.
● Avoid getting dirt or water in the fuel tank.
20170830152249_31MKF6100_enu_BOOK Page 17 Wednesday, August 30 2017 15:45:50 JST
Riding Precautions
Motorcycle Safety
14
Honda selectable torque controlWhen the Honda selectable torque control(Torque Control) detects rear wheel spin duringacceleration, the system will limit the amount oftorque applied to the rear wheel based on theTorque Control level selected.Additionally, the system ease the rapid motionduring the wheelie when accelerating based onthe Torque Control level selected.
Torque Control will allow some wheel spinduring acceleration at the lower Torque Controllevels settings. Select a level that is appropriatefor your skill and riding conditions.
Torque Control does not work duringdeceleration and will not prevent the rear wheelfrom skidding due to engine braking. Do notclose the throttle suddenly, especially whenriding on slippery surfaces.
Torque Control may not compensate for roughroad conditions or rapid throttle operation.Always consider road and weather conditions,as well as your skills and condition, whenapplying throttle.
If your motorcycle gets stuck in mud, snow orsand, it may be easier to free it by turning offthe Torque Control temporarily.Temporarily turning off Torque Control alsomay help you maintain control and balancewhen riding on off-road terrain.
Always use the recommended tires andsprockets to ensure correct Torque Controloperation.
20170830152249_31MKF6100_enu_BOOK Page 18 Wednesday, August 30 2017 15:45:50 JST
Riding PrecautionsM
otorcycle Safety
15
Accessories &ModificationsWe strongly advise that you do not add anyaccessories that were not specifically designedor approved for your motorcycle by Honda ormake modifications to your motorcycle from itsoriginal design. Doing so can make it unsafe.Modifying your motorcycle may also void yourwarranty and make your motorcycle illegal tooperate on public roads and highways. Beforedeciding to install accessories on yourmotorcycle be certain the modification is safeand legal.
3WARNINGImproper accessories or modificationscan cause a crash in which you can beseriously hurt or killed.
Follow all instructions in this owner'smanual regarding accessories andmodifications.
Do not pull a trailer with, or attach a sidecar to,your motorcycle. Your motorcycle was notdesigned for these attachments, and their usecan seriously impair your motorcycle's handling.
CBR1000S1/S2Do not attempt modify the motorcycle to carrya passenger. The subframe was not designed tocarry the additional weight of a passenger.
20170830152249_31MKF6100_enu_BOOK Page 19 Wednesday, August 30 2017 15:45:50 JST
Accessories & Modifications
Motorcycle Safety
16
Loading● CBR1000S1/S2
Never carry a passenger. Your motorcyclewas not designed to carry a passenger.
● Carrying extra weight affects yourmotorcycle's handling, braking and stability.Always ride at a safe speed for the load youare carrying.
● Avoid carrying an excessive load and keepwithin specified load limits.Maximum weight capacity 2 P. 223
● Tie all luggage securely, evenly balancedand close to the center of the motorcycle.
● Do not place objects near the lights or themuffler.
CBR1000RR/RA
3WARNINGOverloading or improper loading cancause a crash and you can be seriouslyhurt or killed.
Follow all load limits and other loadingguidelines in this manual.
CBR1000S1/S2
3WARNINGOverloading improper loading orcarrying a passenger can cause a crashand you can be seriously hurt or killed.
Follow all load limits and other loadingguidelines in this manual.
20170830152249_31MKF6100_enu_BOOK Page 20 Wednesday, August 30 2017 15:45:50 JST
LoadingM
otorcycle Safety
17
Parts Location
20170830152249_31MKF6100_enu_BOOK Page 21 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
18
Main fuse/FI fuse (P.198)
Front brake lever (P.163)Throttle grip (P.161)Rear brake fluid reservoir(P.149)
Rear brake pedal
Engine oil filter (P.145)
Engine oil fill cap (P.143)Engine oil dipstick (P.143)
Tool kit (P.113)Document bag (P.113)
Engine oil drain bolt (P.145)
Fuse box (P.197)Battery (P.137)Front brake fluid reservoir(P.149)
Front suspension springpreload adjuster (P.164)
CBR1000RR/RA
Under cowl (P.142)
20170830152249_31MKF6100_enu_BOOK Page 22 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
19Continued
Clutch lever (P.157)
Rear suspension springpreload adjuster (P.167)Drive chain (P.153)
Side stand (P.152)Shift lever (P.109)
Front suspension rebound damping/compression dampingadjusters (P.165) (P.166)
Front seat (P.139)
Coolant reserve tank(P.147)
Fuel fill cap (P.111)
Rear seat (P.140)Rear suspensioncompression dampingadjuster (P.169)Rear suspension rebounddamping adjuster (P.168)
Front suspension spring preload adjuster (P.164)
20170830152249_31MKF6100_enu_BOOK Page 23 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
20
Parts Location (Continued)
Main fuse/FI fuse (P.198)
Front brake lever (P.163)Throttle grip (P.161)Rear brake fluid reservoir(P.149)
Rear brake pedal
Engine oil filter (P.145)
Engine oil fill cap (P.143)Engine oil dipstick (P.143)
Tool kit (P.113)Document bag (P.113)
Engine oil drain bolt (P.145)
Fuse box (P.197)Battery (P.137)Front brake fluid reservoir(P.149)
CBR1000S1/S2
Under cowl (P.142)
20170830152249_31MKF6100_enu_BOOK Page 24 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
21
Clutch lever (P.157)
Drive chain (P.153)
Side stand (P.152)Shift lever (P.109)
Front seat (P.139)
Coolant reserve tank(P.147)
Fuel fill cap (P.111)
Single seat cowl (P.141)
Front suspension spring preload adjusters (P.171)
Rear suspension springpreload adjuster (P.173)
Instruments
20170830152249_31MKF6100_enu_BOOK Page 25 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
22
Display CheckWhen the ignition switch is turned to the ON position, the opening symbol will show on thedisplay. If the display itself does not shows when it should, have your dealer check forproblems.
Street mode
Clock (12-hour display) To set the clock: (P.70)
Speedometer
TachometerNOTICEDo not operate the engine in thetachometer red zone. Excessiveengine speed can adversely affectengine life.
You can select the street mode or circuit mode display.To change the circuit mode: (P.24)
Tachometer red zone(excessive engine rpm range)
A1321
P T SEB
QS OFF
20170830152249_31MKF6100_enu_BOOK Page 26 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
23Continued
Shows 1st to 6th gear positions. “-”appearswhen the transmission is not shifted properly.
Gear position indicator
Multi-information display (P.25)
Quick Shifter indicatorDisplays the current status of the Quick Shifter.
CBR1000RR/RA
CBR1000S1/S2
: Quick Shifter system is disabled.: Quick Shifter upshifting is enabled.: Quick Shifter downshifting isenabled.: Quick Shifter upshifting anddownshifting are both enabled.
QUICK SHIFTER: (P.45) (P.46)(P.110)
20170830152249_31MKF6100_enu_BOOK Page 27 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
24
Instruments (Continued)
Display CheckWhen the ignition switch is turned to the ON position, the opening symbol will show on thedisplay. If the display itself does not shows when it should, have your dealer check forproblems.
Circuit mode
To change to the circuit mode :
u To return to the street mode display, press and hold the LAP button.● Press and hold the LAP button with your motorcycle stopped.
● Select the “CIRCUIT” menu on the “DISPLAY” screen. (P.43) (P.59)u To return to the street mode display, select the “STREET” menu on the “DISPLAY”
Lap timer (P.86)
LAP button
Multi-information display
20170830152249_31MKF6100_enu_BOOK Page 28 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
25Continued
Multi-information display can display the coolant temperature gauge, riding modes, INFO 1,INFO 2 and INFO 3 displays.
CBR1000RR/RA
CBR1000S1/S2
Riding mode (P.101)
INFO 3 display (P.39)INFO 2 display (P.31)INFO 1 display (P.28)
You can change the riding modes, INFO 1, INFO 2 and INFO 3 displays of the Multi-information display.To switch the multi-information display: (P.27)
INFO 3 display (P.39)INFO 2 display (P.31)INFO 1 display (P.28)
Coolant temperature gauge ( )(P.26)
Coolant temperature gauge ( )(P.26)
Coolant temperature gauge ( )Display range: 94°F (35°C) to 269°F (132°C)● 93°F (34°C) or less: “---” is displayed.● Between 251°F (122°C) and 268°F (131°C):
- High coolant temperature indicator lights.- Coolant temperature digits flash.
● Above 269°F (132°C):- High coolant temperature indicator lights.- “269°F (132°C)” flashes.
● Even if the engine coolant temperature is low, the cooling fan may start running when yourev up the engine. This is normal.
Pop-up informationIn the following cases, the INFO 3 display, or the INFO 3 display and the coolant temperaturegauge change to a pop-up information display.● When an inspection time of your motorcycle is approaching.● When your motorcycle has helpful information.● When your motorcycle has a problem with the PGM-FI system.● CBR1000S1/S2
When your motorcycle has a problem with the ÖHLINS Smart EC system.Information of the pop-up information: (P.90)
20170830152249_31MKF6100_enu_BOOK Page 29 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
26
Instruments (Continued)
20170830152249_31MKF6100_enu_BOOK Page 30 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
27Continued
To switch the multi-information displayTo select the display area, repeatedly press theMODE button.
Press the MODE button
SEL (down) button
SEL (up) button
MODE button
Riding mode (P.101) INFO 1 display (P.28)
INFO 2 display (P.31)INFO 3 display (P.39)
If the MODE button is not pressed within 10seconds, the display returns to the riding modedisplay.
u Can not select the INFO 3 display while pop-upinformation displayed. (P.90)
INFO 1 displayYou can select the following:• Odometer [TOTAL]• Tripmeter [TRIP A/B]
Changing the INFO 1 displaya Select the INFO 1 display. (P.27)b Press the SEL (up) or SEL (down)
button until the desired indication isdisplayed.
c Press the MODE button. The INFO 1 displayis set, and then the display moves to theINFO 2 display.
20170830152249_31MKF6100_enu_BOOK Page 31 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
28
Instruments (Continued)
TOTAL (P.29)
TRIP A (P.29)
TRIP B (P.29)
Press the SEL (down) buttonPress the SEL (up) button
Odometer [TOTAL]Total distance ridden.
When “------” is displayed, go to your dealerfor service.
Tripmeter A/B [TRIP A/B]Distance ridden since the tripmeter was reset.
When “----.-” is displayed, go to your dealerfor service.
To reset the tripmeter: (P.30)
20170830152249_31MKF6100_enu_BOOK Page 32 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
29Continued
# To Reset the Tripmeter and TripmeterA Fuel Consumption
To reset tripmeter A and tripmeter A fuelconsumption together, press and hold theMODE button with the tripmeter A ortripmeter A fuel consumption displayed.
To reset the tripmeter B, press and hold theMODE button with the tripmeter B displayed.
20170830152249_31MKF6100_enu_BOOK Page 33 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
30
Instruments (Continued)
Tripmeter A Tripmeter A fuelconsumption
or
or
Tripmeter B
INFO 2 displayYou can select the following:• Numerical tachometer display [REV]• Current fuel mileage [INST. CONS.]• Average fuel mileage [AVE. CONS.]• Tripmeter A fuel consumption [TRIP A CONS.]• Average speed [AVG. SPD.]• Elapsed time [ELAPSED]• Available riding distance [RANGE]• Amount of remaining fuel [REMAIN]
Changing the INFO 2 displaya Select the INFO 2 display. (P.27)b Press the SEL (up) or SEL (down) button until the desired display is displayed.c Press the MODE button. The INFO 2 display is set, and display moves to the INFO 3 display.
20170830152249_31MKF6100_enu_BOOK Page 34 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
31Continued
When the low fuel indicator lights and the low fuel pop-up information appear, INFO 3 displaywill automatically switches to the amount of remaining fuel display.
20170830152249_31MKF6100_enu_BOOK Page 35 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
32
Instruments (Continued)Numerical tachometer display (P.33)
Current fuel mileage (P.33)
Average fuel mileage (P.34)
Tripmeter A fuel consumption (P.35)
Available ridingdistance (P.36)
Average speed (P.35)
Elapsed time (P.36)
Amount of remainingfuel (P.37)
Press the SEL (up)buttonPress the SEL (down)buttonOnly when reserve fuel mode: (P.38)
Numerical tachometer Display [REV]Displays engine revolutions per minutes.Display range: 0 to 15,400 r/min (rpm)● Above 15,400 r/min (rpm): “15400” is
displayed.
Current fuel mileage [INST. CONS.]Displays the current instant fuel mileage.Display range: 0.0 to 99.9 MPG (mile/L, L/100km or km/L)● When your speed is less than 4 mph (7
km/h): “--.-” is displayed.● Above 99.9 MPG (mile/L or km/L):“99.9” is
displayed.● Above 99.9 L/100km: “--.-” is displayed.
When “--.-” is displayed except for theabove-mentioned cases, go to your dealerfor service.
20170830152249_31MKF6100_enu_BOOK Page 36 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
33Continued
Average fuel mileage [AVG. CONS.]Displays the average fuel mileage since theaverage fuel mileage was reset.Display range: 0.0 to 99.9 MPG (mile/L, L/100km or km/L)● Above 99.9 MPG (mile/L or km/L): “99.9”
is displayed.● Above 99.9 L/100km: “--.-” is displayed.● When the average fuel mileage is reset:
“--.-” is displayed.
When “--.-” is displayed except for theabove-mentioned cases, go to your dealerfor service.
# To Reset the Average Fuel MileagePress and hold the MODE button with theaverage fuel mileage displayed.
20170830152249_31MKF6100_enu_BOOK Page 37 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
34
Instruments (Continued)
Average fuelmileage
Tripmeter A fuel consumption [TRIP ACONS.]Displays the tripmeter A fuel consumptionsince the tripmeter A was reset.Display range: 0.0 to 300.0 GAL (gallon) or0.0 to 300.0 L (liters)● Above 300 GAL (gallon) or 300 L (liters):
“300.0” is displayed.● When the tripmeter A fuel consumption is
reset: “---.-” is displayed.
When “---.-” is displayed except for theabove-mentioned cases, go to your dealerfor service.To reset the tripmeter A fuelconsumption: (P.30)
Average speed [AVG. SPD.]Displays average speed since the engine wasstarted.Display range: 0 to 186 mph (0 to 299 km/h)● Initial display: “---” is displayed.● When your motorcycle has traveled less
than 0.12 mile (0.2 km) since the enginewas started: “---” is displayed.
● When your motorcycle operating time isless than 16 seconds since the engine wasstarted: “---” is displayed.
When “---” is displayed except for the above-mentioned cases, go to your dealer forservice.
20170830152249_31MKF6100_enu_BOOK Page 38 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
35Continued
Elapsed time [ELAPSED]Displays operating time since the engine wasstarted.Display range: 00:00 to 99:59 (hours:minutes)● Above 99:59: returns to 00:00.
When the ignition switch is turned to the OFFposition, the elapsed time is reset.
When “--:--” is displayed, go to your dealerfor service.
Available riding distance [RANGE] (Onlyreserve fuel mode)When the low fuel indicator lights and thelow fuel pop-up information appears, theestimated available riding distance isindicated.Display range: 99 to 0 mile (km)● Above 99 mile (km): “99” is displayed.● Below 0.2 GAL (1.0 L): “--” is displayed.
The indicated available riding distance iscalculated based on the riding states, and theindicated figure may not always be the actualallowable distance.
When “--” is displayed except for the above-mentioned cases, go to your dealer forservice.
20170830152249_31MKF6100_enu_BOOK Page 39 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
36
Instruments (Continued)
Amount of remaining fuel [REMAIN](Only reserve fuel mode)When the low fuel indicator lights and thelow fuel pop-up information appears, theestimated amount of remaining fuel can beselected.Display range: 0.9 to 0.2 GAL (gallon) or 4.0to 1.0 L (liters)● Below 0.2 GAL (1.0 L): “-.-” is displayed.
The amount of remaining fuel is calculatedbased on the riding states.The indicated amount of remaining fuel maybe different from the actual amount.
When “-.-” is displayed except for the above-mentioned cases, go to your dealer forservice.
20170830152249_31MKF6100_enu_BOOK Page 40 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
37Continued
Reserve Fuel ModeWhen the low fuel indicator lights and thelow fuel pop-up information appears, theavailable riding distance is indicated, and theamount of remaining fuel display can beselected. You should refill the tank as soon as possible.
Remaining fuel amount turned to the reservefuel mode:1.1 US gal (4.0 L)
After refueling more than the reserveamount, the display returns to normal whenthe ignition switch has been ON position forabout a minute.
20170830152249_31MKF6100_enu_BOOK Page 41 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
38
Instruments (Continued)Low fuel pop-up information
Available ridingdistanceLow fuel indicator
INFO 3 displayYou can select the following:• CBR Logo• Shift indicator set value [REV IND NE]• Throttle grip angle [GRIP ANGLE]• Battery voltage [VOLTAGE]• Date [DATE]• User letter [USER LETTER]• Blank display
Changing the INFO 3 displaya Select the INFO 3 display. (P.27)b Press the SEL (up) or SEL (down)
button until the desired display is displayed.c Press the MODE button. The INFO 3 display
is set, and then the display moves to theriding mode display.
20170830152249_31MKF6100_enu_BOOK Page 42 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
39Continued
CBR Logo (P.40) Shift indicator setvalue (P.40)
Throttle gripangle (P.40)
Blank display (P.41) User letter (P.41) Date (P.41)
Battery voltage(P.40)
Press the SEL (up) buttonPress the SEL (down) button
CBR logo Displays the CBR logo.
Shift indicator set value [REV IND NE]Displays the shift indicator set value.Display range: OFF or 4,000 - 16,600 r/min
To set the shift indicator: (P.61)
Throttle grip angle [GRIP ANGLE]Displays the throttle grip angle duringoperation.
When “--” is displayed, go to your dealer forservice.
Battery voltage [VOLTAGE]Displays the current voltage.
20170830152249_31MKF6100_enu_BOOK Page 43 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
40
Instruments (Continued)
Date [DATE]Displays the today's date.Display range:
Day of the week: MON to SUNDAY: 1 to 31Month: JAN to DECYear: 2010 to 2099
To set the Date: (P.70)
User letter [USER LETTER]Displays the characters of user's choice.
To set the USER LETTER: (P.64)
Blank displayDisplay the blank.
20170830152249_31MKF6100_enu_BOOK Page 44 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
41Continued
Setting modeYou can perform the following:● FUNCTION (P.45)
u CBR1000S1/S2Setting the Quick Shifter
u CBR1000S1/S2Setting the suspension
● LAP TIME (P.55)u Checking the lap timeu Resetting the lap time
● DISPLAY (P.58)u Changing the display modeu Setting the shift indicatoru Setting the backlight brightnessu Setting the back groundu Setting the user letteru Setting the favorite
● GENERAL (P.69)u Setting the date and clocku Setting each meter unitu Resetting to factory default settings
● SERVICE (P.79)u Checking the next inspection scheduleu CBR1000S1/S2
SUSPENSION“EQUIPMENT” is displayed but notselectable.
u CBR1000S1/S2Quick Shifter“INITIALIZE” and “EQUIPMENT” aredisplayed but not selectable.
u Checking the current problem with thePGM-FI system.CBR1000S1/S2Checking the current problem with theÖHLINS Smart EC system.
u “SPORTS KIT ECU USAGE” is displayedbut not usable.
● SPORTS KIT (Not selectable)
20170830152249_31MKF6100_enu_BOOK Page 45 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
42
Instruments (Continued)
# To Shift to the Setting ModePress and hold the MODE button and SEL
(up) or SEL (down) button until mainmenu screen is displayed with yourmotorcycle stopped.
Select a menu by pressing the SEL (up)or SEL (down) button and press theMODE button.u Press and hold the SEL (up) or SEL
(down) button to move the menu quickly.
20170830152249_31MKF6100_enu_BOOK Page 46 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
43Continued
Main menu screen
To end the settingSelect the “EXIT” menu on the main menuscreen, or press and hold the MODE buttonand SEL (up) or SEL (down) button.Also, the setting mode is ended when yourmotorcycle speed reaches approximately 1km/h (1 mph).u Press and hold the MODE button and SEL
(up) or SEL (down) button to returnto the ordinary display.Note that doing so cancels the settings leftincomplete.
20170830152249_31MKF6100_enu_BOOK Page 47 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
44
Instruments (Continued)Ordinary display
FUNCTION (P.45)
LAP TIME (P.55)
DISPLAY (P.58)
GENERAL (P.69)
SERVICE (P.79)
SPORTS KIT (Cannot select)
EXIT
Press the MODE buttonPress and hold the MODE buttonand SEL (up) or SEL (down)buttonPress the SEL (up) buttonPress the SEL (down) button
FUNCTION
# To Set the FUNCTION Menua Select the “FUNCTION” menu on the main
menu screen. (P.43)b Select a menu by pressing the SEL (up)
or SEL (down) button and press theMODE button.
To end the settingSelect the (return) on the menu screen.The display returns to the “FUNCTION” menuon the main menu screen.
20170830152249_31MKF6100_enu_BOOK Page 48 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
45Continued
Press the MODE buttonPress the SEL (up) buttonPress the SEL (down) button
FUNCTION
QUICK SHIFTER CBR1000S1/S2 (P.46)
SUSPENSION A1 CBR1000S1/S2 (P.51)
SUSPENSION A2 CBR1000S1/S2 (P.51)
SUSPENSION A3 CBR1000S1/S2 (P.51)
SUSPENSION M1 CBR1000S1/S2 (P.52)
SUSPENSION M2 CBR1000S1/S2 (P.52)
SUSPENSION M3 CBR1000S1/S2 (P.52)
(return)
"FUNCTION" is selected
# QUICK SHIFTERCBR1000S1/S2You can change the setting of the QuickShifter.
• UP:To select “ON” (activate) or “OFF”(deactivate) for upshifting (P.47)
• DOWN:To select “ON” (activate) or “OFF”(deactivate) for downshifting (P.48)
• UP LVL:To select the shift pedal load level foractivating the Quick Shifter whenupshifting (P.49)
• DOWN LVL:To select the shift pedal load level foractivating the Quick Shifter whendownshifting (P.50)
To end the settingSelect the (return) on the menu screen.The display returns to the “QUICKSHIFTER”menu on the “FUNCTION” screen.
To use the Quick Shifter (P.110)
20170830152249_31MKF6100_enu_BOOK Page 49 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
46
Instruments (Continued)
UPYou can select “ON” (activate) or “OFF”(deactivate) for upshifting with the QuickShifter.a Select the “UP” using the SEL (up) or
SEL (down) button, and press theMODE button.u Press and hold the SEL (up) or SEL
(down) button to move the menuquickly.
b Select “ON” (activate) or “OFF” (deactivate)using the SEL (up) or SEL (down)button.
c Press the MODE button. The “UP” setting isset, and then the display returns to theupper level hierarchy.
20170830152249_31MKF6100_enu_BOOK Page 50 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
47Continued
DOWNYou can select “ON” (activate) or “OFF”(deactivate) for downshifting with the QuickShifter.a Select the “DOWN” using the SEL (up)
or SEL (down) button, and press theMODE button.u Press and hold the SEL (up) or SEL
(down) button to move the menuquickly.
b Select “ON” (activate) or “OFF” (deactivate)using the SEL (up) or SEL (down)button.
c Press the MODE button. The “DOWN”setting is set, and then the display returns tothe upper level hierarchy.
20170830152249_31MKF6100_enu_BOOK Page 51 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
48
Instruments (Continued)
UP LVLYou can select the shift pedal load level foractivating the Quick Shifter when upshifting.a Select the “UP LVL” using the SEL (up)
or SEL (down) button, and press theMODE button.u Press and hold the SEL (up) or SEL
(down) button to move the menuquickly.
b Select one of the three levels using the SEL (up) or SEL (down) button.
u Press and hold the SEL (up) or SEL (down) button to move the menu
quickly.u Available setting range:
1 (light operation) to 3 (heavy operation)
c Press the MODE button. The “UP LVL”setting is set, and then the display returns tothe upper level hierarchy.
20170830152249_31MKF6100_enu_BOOK Page 52 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
49Continued
DOWN LVLYou can select the shift pedal load level foractivating the Quick Shifter whendownshifting.a Select the “DOWN LVL” using the SEL
(up) or SEL (down) button, and pressthe MODE button.u Press and hold the SEL (up) or SEL
(down) button to move the menuquickly.
b Select one of the three levels using the SEL (up) or SEL (down) button.
u Press and hold the SEL (up) or SEL (down) button to move the menu
quickly.u Available setting range:
1 (light operation) to 3 (heavy operation)
c Press the MODE button. The “DOWN LVL”setting is set, and then the display returns tothe upper level hierarchy.
20170830152249_31MKF6100_enu_BOOK Page 53 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
50
Instruments (Continued)
# SUSPENSION A1, A2 and A3CBR1000S1/S2You can change the levels of OBTi supportitems.Adjusting the ÖHLINS Smart EC system(P.170)
To end the settingSelect the (return) on the menu screen.The display returns to the “SUSPENSION A1”,“SUSPENSION A2” or “SUSPENSION A3”menu on the “FUNCTION” screen.
BRAKE, ACC (SUSPENSION A1 only),CORNER (SUSPENSION A1 only) andGENERALYou can select the “DEFAULT” or one of theten suspension damping levels for dampingcharacteristics of the suspension.a Select the item you want to change using
the SEL (up) or SEL (down) button,and press the MODE button.u Press and hold the SEL (up) or SEL
(down) button to move the menuquickly.
20170830152249_31MKF6100_enu_BOOK Page 54 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
51Continued
b Select the “DEFAULT” or one of the tensuspension damping levels using the SEL
(up) or SEL (down) button.u Press and hold the SEL (up) or SEL
(down) button to move the menuquickly.
u Available setting range:-5 to +5
c Press the MODE button. The selected item isset, and then the display returns to theupper level hierarchy.
# SUSPENSION M1, M2 and M3CBR1000S1/S2You can adjust the compression andrebound damping of the front and rearsuspension electronically.
Adjusting the ÖHLINS Smart EC system(P.170)
To end the settingSelect the (return) on the menu screen.The display returns to the “SUSPENSION M1”,“SUSPENSION M2” or “SUSPENSION M3”menu on the “FUNCTION” screen.
20170830152249_31MKF6100_enu_BOOK Page 55 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
52
Instruments (Continued)
FR COMP, FR REB, RR COMP and RR REBYou can select one of the 21 differentdamping levels for the front and rearsuspension.a Select the item you want to change using
the SEL (up) or SEL (down) button,and press the MODE button.u Press and hold the SEL (up) or SEL
(down) button to move the menuquickly.
b Adjust to one of the 21 damping levels usingthe SEL (up) or SEL (down) button.u Press and hold the SEL (up) or SEL
(down) button to move the menuquickly.
u Available setting:MIN (soft), MAX (hard), and the range5% - 95% in 5% increments
20170830152249_31MKF6100_enu_BOOK Page 56 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
53Continued
Preset settings are as follows.Front Rear
CompressionFR COM
ReboundFR REB
CompressionRR COM
ReboundRR REB
M1 45% 30% 60% 50%M2 20% 25% 50% 45%M3 10% 10% 25% 30%
c Press the MODE button. The selected theitem setting is set, and then the displayreturns to the upper level hierarchy.
20170830152249_31MKF6100_enu_BOOK Page 57 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
54
Instruments (Continued)
LAP TIME
# To Set the LAP TIME Menua Select the “LAP TIME” menu on the main
menu screen. (P.43)b Select the menu by pressing the SEL
(up) or SEL (down) button, and pressthe MODE button.
To end the settingSelect the (return) on the menu screen.The display returns to the “LAP TIME” menuon the main menu screen.
20170830152249_31MKF6100_enu_BOOK Page 58 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
55Continued
Press the MODE buttonPress the SEL (up) buttonPress the SEL (down) button
LAP TIME
LAP DATA (P.56)
(return)
CLEAR DATA (P.57)
"LAP TIME" is selected
# LAP DATAThe history of recorded lap time andinformation are displayed.To display the other lap information, pressthe SEL (up) or SEL (down) button.To display the maximum acceleration,maximum deceleration, maximum left bank
angle and maximum right bank angleinformation, press the LAP button.To end the display of lap time history, pressthe MODE button. The display returns to theupper level hierarchy.To use the Lap Timer (P.86)
20170830152249_31MKF6100_enu_BOOK Page 59 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
56
Instruments (Continued)
Best icon (Appears when the fastest lap time displayed.)
Lap number Lap time Time stampPress theLAPbutton
Maximumvehicle speed
Maximum enginerevolutions
Maximum coolant temperature
Maximum leftbank angle
Maximum rightbank angle
Maximum acceleration Maximum deceleration
# CLEAR DATAa Select “NO” (not clear) or “YES” (clear) using
the SEL (up) or SEL (down) button.b Press the MODE button. The display returns
to the upper level hierarchy.
To use the Lap Timer (P.86)
20170830152249_31MKF6100_enu_BOOK Page 60 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
57Continued
DISPLAY
# To Set the DISPLAY Menua Select the “DISPLAY” menu on the main
menu screen. (P.43)b Select the menu by pressing the SEL
(up) or SEL (down) button and press theMODE button.
To end the settingSelect the (return) on the menu screen.The display returns to the “DISPLAY” menuon the main menu screen.
20170830152249_31MKF6100_enu_BOOK Page 61 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
58
Instruments (Continued)
Press the SEL (down) buttonPress the SEL (up) buttonPress the MODE button
"DISPLAY" is selected
DISPLAY
DISPLAY MODE (P.59)
BRIGHTNESS (P.62)
SHIFT INDICATOR (P.61)
BACKGROUND (P.63)
USER LETTER (P.64)
FAVORITE (P.65)
(return)
# DISPLAY MODEa Select “STREET”, “MECHANIC” or “CIRCUIT”
using the SEL (up) or SEL (down)button.
b When the “STREET” or “CIRCUIT” is selectedPress the MODE button. The display modesetting is set, and then the display returns tothe upper level hierarchy.When the “MECHANIC” is selectedPress the MODE button. The display movesto the mechanic mode.
c When the “MECHANIC” is selectedPress the MODE button. The mechanicmode ends, and then the display returns tothe upper level hierarchy.u The display mode returns to the
previously selected mode.
20170830152249_31MKF6100_enu_BOOK Page 62 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
59Continued
Mechanic ModeDisplays the current information of themotorcycle.Displays the following information:● Tachometer● Gear position● Throttle grip position● Coolant temperature● Battery voltage
20170830152249_31MKF6100_enu_BOOK Page 63 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
60
Instruments (Continued)Throttle grip position
Tachometer Gear position
Battery voltageCoolant temperature
# SHIFT INDICATORYou can change the setting of the shiftindicators.
a Select the “OFF” (deactivate) or an enginerevolution at which the shift indicators startblinking using the SEL (up) or SEL (down) button.u Press and hold the SEL (up) or SEL
(down) button to move the menuquickly.
u The value increases by 200 r/min (rpm)increments.
u Available setting range:4,000 - 16,600 r/min (rpm)
b Press the MODE button. The shift indicatorsetting is set, and then the display returns tothe upper level hierarchy.
Information of the Shift Indicator:(P.96)
20170830152249_31MKF6100_enu_BOOK Page 64 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
61Continued
# BRIGHTNESSYou can adjust the backlight brightness toone of the eight levels or select the autoadjustment.Automatic brightness control (P.203)
a Select the “AUTO” (auto adjustment) orbrightness level using the SEL (up) orSEL (down) button.u Press and hold the SEL (up) or SEL
(down) button to move the menuquickly.
b Press the MODE button. The backlightbrightness setting is set, and then the displayreturns to the upper level hierarchy.
20170830152249_31MKF6100_enu_BOOK Page 65 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
62
Instruments (Continued)
# BACKGROUNDYou can change the setting of thebackground to one of the four categories orselect the auto adjustment.
a Select the “AUTO”, “WHITE”, “BLACK”,“METALLIC” or “CARBON” using the SEL (up) or SEL (down) button.u Press and hold the SEL (up) or SEL
(down) button to move the menuquickly.
b Press the MODE button. The backgroundsetting is set, and then the display returns tothe upper level hierarchy.
20170830152249_31MKF6100_enu_BOOK Page 66 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
63Continued
# USER LETTERYou can select any 10 characters you like.
a Select the first character using the SEL (up) or SEL (down) button until adesired character appears.u Press and hold the SEL (up) or SEL
(down) button to move the menuquickly.
b Press the MODE button. The cursor movesto the next position.
c Repeat the steps a and b to selectcharacters for the other positions until adesired word is complete.
d When the tenth character is selected, thedisplay returns to the upper level hierarchy.
A list of characters that can be selectedA B C D E F G H IJ K L M N O P Q RS T U V W X Y Z 01 2 3 4 5 6 7 8 9! ” # $ % & ‘ ’ () * + , - . / : ;< > = ? @ ^ _
20170830152249_31MKF6100_enu_BOOK Page 67 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
64
Instruments (Continued)
# FAVORITEYou can change the indications on the INFO1, INFO 2, and INFO 3 to the followinginformation by pressing the LAP button whilethe street mode is displayed.
INFO 1:“TOTAL”, “TRIP A” or “TRIP B”INFO 2:“REV”, “INST.CONS.”, “AVG.CONS.”, “TRIP ACONS.”, “AVG.SPD.” or “ELAPSED”INFO 3:“CBR LOGO”, “REV IND NE”, “GRIP ANGLE”,“VOLTAGE”, “DATE”, “USER LETTER” or blankdisplay
To end the settingSelect the (return) on the menu screen.The display returns to the “FAVORITE” menuon the “DISPLAY” menu screen.
20170830152249_31MKF6100_enu_BOOK Page 68 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
65Continued
INFO 1You can select the “TOTAL”, “TRIP A” or “TRIPB” for INFO 1.a Select the “INFO 1” using the SEL (up) or
SEL (down) button, and press theMODE button.u Press and hold the SEL (up) or SEL
(down) button to move the menuquickly.
b Select the “TOTAL”, “TRIP A” or “TRIP B”using the SEL (up) or SEL (down)button.u Press and hold the SEL (up) or SEL
(down) button to move the menuquickly.
c Press the MODE button. The “INFO 1”setting is set, and then the display returns tothe upper level hierarchy.
20170830152249_31MKF6100_enu_BOOK Page 69 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
66
Instruments (Continued)
INFO 2You can select the “REV”, “INST.CONS.”,“AVG.CONS.”, “TRIP A CONS.”, “AVG.SPD.” or“ELAPSED” for INFO 2.a Select the “INFO 2” using the SEL (up) or
SEL (down) button, and press theMODE button.u Press and hold the SEL (up) or SEL
(down) button to move the menuquickly.
b Select the “REV”, “INST.CONS.”,“AVG.CONS.”, “TRIP A CONS.”, “AVG.SPD.”or “ELAPSED” using the SEL (up) or SEL
(down) button.u Press and hold the SEL (up) or SEL
(down) button to move the menuquickly.
c Press the MODE button. The “INFO 2”setting is set, and then the display returns tothe upper level hierarchy.
20170830152249_31MKF6100_enu_BOOK Page 70 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
67Continued
INFO 3You can select the “CBR LOGO”, “REV INDNE”, “GRIP ANGLE”, “VOLTAGE”, “DATE”,“USER LETTER” or blank display for INFO 3.a Select the “INFO 3” using the SEL (up) or
SEL (down) button, and press theMODE button.u Press and hold the SEL (up) or SEL
(down) button to move the menuquickly.
b Select the “CBR LOGO”, “REV IND NE”, “GRIPANGLE”, “VOLTAGE”, “DATE”, “USERLETTER” or blank display using the SEL (up) or SEL (down) button.u Press and hold the SEL (up) or SEL
(down) button to move the menuquickly.
c Press the MODE button. The “INFO 3”setting is set, and then the display returns tothe upper level hierarchy.
20170830152249_31MKF6100_enu_BOOK Page 71 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
68
Instruments (Continued)
GENERAL
# To Set the GENERAL Menua Select the “GENERAL” on the main menu
screen. (P.43)b Select a menu by pressing the SEL (up)
or SEL (down) button and press theMODE button.
To end the settingSelect the (return) menu on the menuscreen. The display returns to the “GENERAL”on the main menu screen.
20170830152249_31MKF6100_enu_BOOK Page 72 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
69Continued
"GENERAL" is selectedGENERAL
DATE & TIME (P.70)
UNITS (P.71)
RESTORE DEFAULT (P.76)
(return)
Press the MODE buttonPress the SEL (up) buttonPress the SEL (up) button
# DATE & TIMEa Press the SEL (up) or SEL (down)
button until the desired tens digit of the yearis displayed.
b Press the MODE button. The cursor movesto the ones digit of the year.
c Press the SEL (up) or SEL (down)button until the desired ones digit of theyear is displayed.
d Press the MODE button. The cursor movesto the indication of month.
e Press the SEL (up) or SEL (down)button until the desired month is displayed.
f Press the MODE button. The cursor movesto the indication of date.
g Press the SEL (up) or SEL (down)button until the desired date is displayed.
h Press the MODE button. The cursor movesto the “AM” or “PM”.
i Select the “AM” or “PM” using the SEL (up) or SEL (down) button.
j Press the MODE button. The cursor movesto the indication of hour.
k Press the SEL (up) or SEL (down)button until the desired hour is displayed.
20170830152249_31MKF6100_enu_BOOK Page 73 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
70
Instruments (Continued)
l Press the MODE button. The cursor movesto the indication of minute.
m Press the SEL (up) or SEL (down)button until the desired minute is displayed.
n Press the MODE button. The date and clocksetting is set, and then the display returns tothe upper level hierarchy.
Press and hold the SEL (up) or SEL (down) button to move the menu quickly.
# UNITSYou can change the speed and mileage,temperature, and fuel mileage meter units.
To set each unita Select the “SPEED”, “TEMP.” or “FUEL
CONS.” using the SEL (up) or SEL (down) button.
b Press the MODE button. The display movesto each unit setting screen.
The units of the speedometer, odometer,tripmeter A/B, current fuel mileage, averagefuel mileage, tripmeter A fuel consumption,average speed, available riding distance andamount of remaining fuel are changed in“SPEED” menu.
20170830152249_31MKF6100_enu_BOOK Page 74 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
71Continued
The unit of coolant temperature gauge andinformation of temperature (lap data historymode and mechanic mode) is changed by“TEMP.” menu.
The units of the current fuel mileage, averagefuel mileage and amount of remaining fuelare changed in “FUEL CONS.” menu.
To end the settingSelect the (return) on the menu screen.The display returns to the “UNITS” menu onthe “GENERAL” menu screen.
20170830152249_31MKF6100_enu_BOOK Page 75 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
72
Instruments (Continued)
Speed and mileage unit [SPEED]a Select the “mph” or “km/h” using the SEL
(up) or SEL (down) button.b Press the MODE button. The speed and
mileage unit setting is set, and then thedisplay returns to the upper level hierarchy.
When selecting the “mph”● Units of the speedometer and average
speed show “mph”.● Units of the odometer, tripmeter A/B and
available riding distance show “mile”.● Units of the current fuel mileage and
average fuel mileage show “MPG” or“mile/L”.
● Units of the tripmeter A fuel consumptionand amount of remaining fuel show “GAL”or “L”.
20170830152249_31MKF6100_enu_BOOK Page 76 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
73Continued
When selecting the “km/h”● Units of the speedometer and average
speed show “km/h”.● Units of the odometer, tripmeter A/B and
available riding distance show “km”.● Units of the current fuel mileage and
average fuel mileage show “L/100km” or“km/L”.
● Units of the tripmeter A fuel consumptionand amount of remaining fuel show “L”.
Temperature unit [TEMP.]a Select the “°F” or “°C” using the SEL (up)
or SEL (down) button.b Press the MODE button. The temperature
unit setting is set, and then the displayreturns to the upper level hierarchy.
20170830152249_31MKF6100_enu_BOOK Page 77 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
74
Instruments (Continued)
Fuel mileage meter unit [FUEL CONS.]a When the “mph” of the “SPEED” menu is
selectedSelect the “MPG” or “mile/L” using the SEL
(up) or SEL (down) button.When the “km/h” of the “SPEED” menu isselectedSelect the “L/100 km” or “km/L” using theSEL (up) or SEL (down) button.
b Press the MODE button. The fuel mileagemeter unit setting is set, and then the displayreturns to the upper level hierarchy.
When selecting the “MPG”● Units of the current fuel mileage and
average fuel mileage show “MPG”.● Units of the tripmeter A fuel consumption
and amount of remaining fuel show“GAL”.
When selecting the “mile/L”● Units of the current fuel mileage and
average fuel mileage show “mile/L”.● Units of the tripmeter A fuel consumption
and amount of remaining fuel show “L”.
20170830152249_31MKF6100_enu_BOOK Page 78 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
75Continued
When selecting the “L/100 km”● Units of the current fuel mileage and
average fuel mileage show “L/100 km”.● Units of the tripmeter A fuel consumption
and amount of remaining fuel show “L”.
When selecting the “km/L”● Units of the current fuel mileage and
average fuel mileage show “km/L”.● Units of the tripmeter A fuel consumption
and amount of remaining fuel show “L”.
# RESTORE DEFAULTThe set value can be returned to defaultsetting.a Select the “NO” (not restore) or “YES”
(restore) using the SEL (up) or SEL (down) button.
b When the “NO” is selectedPress the MODE button. The set value ismaintained, and then the display returns tothe upper level hierarchy.When the “YES” is selectedPress the MODE button. The displaychanges to the confirmation screen.
20170830152249_31MKF6100_enu_BOOK Page 79 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
76
Instruments (Continued)
c Select the “NO” (not restore) or “YES”(restore) using the the SEL (up) or SEL
(down) button on the confirmationscreen.
d When the “NO” is selectedPress the MODE button. The set value ismaintained, and then the display returns tothe “RESTORE DEFAULT” menu on the“GENERAL” menu screen.When the “YES” is selectedPress the MODE button. The set valuereturn to default setting.
e Select the “EXIT” by pressing the MODEbutton.
f The display returns to the “RESTOREDEFAULT” menu on the “GENERAL” menuscreen.
20170830152249_31MKF6100_enu_BOOK Page 80 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
77Continued
Default setting values:● LAP DATA: Cleared● DISPLAY MODE: STREET● SHIFT INDICATOR: OFF● BRIGHTNESS: AUTO● BACK GROUND: AUTO● USER LETTER: CBR1000RR● FAVORITE: TOTAL, REV, CBR LOGO● SPEED UNIT: USA mph (Canada km/h)● TEMP UNIT: USA °F (Canada °C)● FUEL CONS UNIT: USA MPG (Canada L/
100km)● CBR1000S1/S2
QUICK SHIFTER: OFF (Quick Shiftersystem is disabled.)
● CBR1000S1/S2SUSPENSION A1, A2, A3: Default setting(P.51)
● CBR1000S1/S2SUSPENSION M1, M2, M3: Preset setting(P.54)
● Riding mode: USER 1 and USER 2 settingvalue returns to initial setting values.(P.102)
20170830152249_31MKF6100_enu_BOOK Page 81 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
78
Instruments (Continued)
SERVICE
# To Set the SERVICE Menua Select the “SERVICE” menu on the main
menu screen. (P.43)b Select the menu by pressing the SEL
(up) or SEL (down) button and press theMODE button.
20170830152249_31MKF6100_enu_BOOK Page 82 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
79Continued
Press the MODE buttonPress the SEL (up) buttonPress the SEL (down) button
MAINTENANCE (P.80)
SUSPENSION (P.83)
QUICK SHIFTER (P.84)
DTC (P.84)
SPORTS KIT ECU (P.85)
(return)
SERVICE
"SERVICE" is selected
To end the settingSelect the (return) on the menu screen,and then the display returns to the “SERVICE”menu on the main menu screen.
# MAINTENANCEYou can check the next inspection time andchange the setting of next inspection.
To return to the upper level hierarchy, pressthe MODE button.
20170830152249_31MKF6100_enu_BOOK Page 83 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
80
Instruments (Continued)
Next engine oil changeNext periodic inspection
Display range:DISTANCE:
Next periodic inspection: -8000 to +99950 mile(-12000 to +99900 km)Next engine oil change:-4000 to +99980 mile(-6000 to +99980 km)u Pass 0 mile (km): “-” mark changed to
“+” markDATE:
Month: JAN to DECYear: 2010 to 2099
When reaching any of the following, thepop-up information is appears in theordinary display. (P.90)● “-300 mile” or “-500 km” from the next
periodic inspection● “-60 mile” or “-100 km” from the next
engine oil change● One month before the set month
20170830152249_31MKF6100_enu_BOOK Page 84 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
81Continued
Maintenancepop-upinformation
Next inspection settinga Select “ ” (periodic inspection ) or “ ”
(engine oil change) using the SEL (up)or SEL (down) button.
b Press and hold the MODE button until the“DISTANCE” value start flashing.
c Press the SEL (up) or SEL (down)button until the desired distance value isdisplayed.u Available setting range of periodic
inspection:100 to 4,000 mile (100 to 6,400 km)
u Available setting range of engine oilchange:100 to 8,000 mile (100 to 12,800 km)
20170830152249_31MKF6100_enu_BOOK Page 85 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
82
Instruments (Continued)
d Press the MODE button. The cursor movesto the indication of month.
e Press the SEL (up) or SEL (down)button until the desired month is displayed.
f Press the MODE button. The cursor movesto the tens digit of the year.
g Press the SEL (up) or SEL (down)button until the desired tens digit of the yearis displayed.
h Press the MODE button. The cursor movesto the ones digit of the year.
i Press the SEL (up) or SEL (down)button until the desired ones digit of theyear is displayed.
j Press the MODE button. The mileage anddate setting is set, and then the displayreturns to the upper level hierarchy.
# SUSPENSIONCBR1000S1/S2“EQUIPMENT” is displayed but not selectable.
Select the (return) on the menu screen.The display returns to the “SUSPENSION”menu on the “SERVICE” menu screen.
20170830152249_31MKF6100_enu_BOOK Page 86 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
83Continued
# QUICK SHIFTERCBR1000S1/S2“INITIALIZE” and “EQUIPMENT” are displayedbut not selectable.
Select the (return) on the menu screen,and then the display returns to the“QUICKSHIFTER” menu on the “SERVICE”menu screen.
# DTCYou can check for a current problem with thePGM-FI system.CBR1000S1/S2You can check for a current problem with theÖHLINS Smart EC system.
If your motorcycle has a problem, the DTCindex is displayed. In this case, the pop-upinformation appears in the ordinary display.(P.90)
20170830152249_31MKF6100_enu_BOOK Page 87 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
84
Instruments (Continued)
Reduce speed and have your motorcycleinspected by your dealer as soon as possible.
To return to the upper level hierarchy, pressthe MODE button.
# SPORTS KIT ECU“SPORTS KIT ECU USAGE” is displayed butnot usable.
To return to the upper level hierarchy, pressthe MODE button.
20170830152249_31MKF6100_enu_BOOK Page 88 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
85Continued
DTC indexes
Lap TimerYou can record lap time in the circuit mode.(P.24)
You can check and clear the recorded laptime data in the setting mode. (P.55)(P.56)
20170830152249_31MKF6100_enu_BOOK Page 89 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
86
Instruments (Continued)
Stopwatch/difference with the best lap
Previous lap timePrevious lap number
Best icon(Displayed when the fastest laptime displayed.)
Lap numberLap time
Time stamp
Maximumvehiclespeed Maximum coolant
temperature
Maximum enginerevolutions
The lap time data includes lap time, maximumvehicle speed, maximum engine revolutions,maximum coolant temperature, maximumacceleration, maximum deceleration, maximumleft bank angle and maximum right bank angle.(P.56)
Display range:Previous lap number: 0 to 50u Exceeds 50, repeats the “50”
Previous lap time: 00'00"00 to 99'59"99u Exceeds 99'59"99, returns to the
“00'00"00”
Stopwatch: 00'00"00 to 99'59"99u Exceeds 99'59"99, returns to the
“00'00"00”
Difference with the best lap:-99'59"99 to 00'00"00 to +99'59"99
Maximum vehicle speed:0 to 186 mph (0 to 299 km/h)
Maximum engine revolutions:0 to 20000 r/min (rpm)
Maximum coolant temperature:-40 to 302°F (-40 to 150°C)
Maximum acceleration: 0 to 8.0 G
Maximum deceleration: 0 to 4.1 G
Maximum left bank angle: 0 to 90 deg
Maximum right bank angle: 0 to 90 deg
20170830152249_31MKF6100_enu_BOOK Page 90 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
87Continued
# To Measure the Lap Timea Press and hold the LAP button or select the
“CIRCUIT” menu on the “DISPLAY MODE”menu screen. (P.24) (P.58) (P.59)
b To start measuring, press the LAP button.u The stopwatch starts measuring.
c To record lap time, press the LAP button ateach lap.u The stopwatch changes to display the
difference with the best lap.After 10 seconds, the display will returnto the stopwatch.
u The previous lap time and previous lapnumber change to the information of theprevious lap.
u If you press the LAP button again withintwo seconds, lap time is not recorded.
u When exceeds 50 lap, the previous lapnumber repeats the “LAP 50”.
20170830152249_31MKF6100_enu_BOOK Page 91 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
88
Instruments (Continued)
Stopwatch
d To end measurement, press and hold theLAP button.
To restart the measurementPress the LAP button again. The stopwatchrestarts measuring.u Measurement starts from the next lap.
# To Check or Clear the Lap TimeSelect the “LAP TIME” menu in the settingmode. (P.55) (P.57)
20170830152249_31MKF6100_enu_BOOK Page 92 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
89Continued
Previous lap number
Previous lap time
Pop-up informationIn the following case, the INFO 3 display orthe INFO 3 display and coolant temperaturegauge change to a pop-up informationdisplay.● Maintenance information:
When the inspection time of yourmotorcycle is approaching.
● Helpful information:When your motorcycle has helpfulinformation.
● Failure information:When your motorcycle has a problemwith the PGM-FI system.CBR1000S1/S2When your motorcycle has a problemwith the ÖHLINS Smart EC system.
When your motorcycle has multiple pieces ofinformation, each pop-up information displayappears alternately.
If your motorcycle has a problem with thePGM-FI and ÖHLINS Smart EC system, thefailure information is displayed in priority toother information.
20170830152249_31MKF6100_enu_BOOK Page 93 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
90
Instruments (Continued)
INFO 3
INFO 3
Pop-upinformationdisplay
Pop-upinformationdisplay
Coolanttemperaturegauge
# Maintenance InformationIndication Explanation Remedy
When the periodic inspectiontime of your motorcycle isapproaching.
Have your motorcycle inspectedby your dealer.
When the oil change time ofyour motorcycle is approaching.
Change the engine oil.(P.145)
# Helpful InformationIndication Explanation Remedy
When the side stand is down. Raise the side stand.
When remaining fuel is reached1.1 US gal (4.0 L).
Fill the fuel tank. (P.111)
CBR1000S1/S2When the suspensioninitialization is waiting.
Stop your motorcycle. Wait for afew seconds until the indicationturns off. If indication dose notturn off, contact your dealer.
20170830152249_31MKF6100_enu_BOOK Page 94 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
91Continued
# Failure InformationIndication Explanation Remedy
When your motorcycle has aproblem with the PGM-FIsystem.
Reduce speed and have yourmotorcycle inspected by yourdealer as soon as possible.
CBR1000S1/S2When your motorcycle has aproblem with the ÖHLINSSmart EC system.
Reduce speed and have yourmotorcycle inspected by yourdealer as soon as possible.
20170830152249_31MKF6100_enu_BOOK Page 95 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
92
Instruments (Continued)
Indicators
20170830152249_31MKF6100_enu_BOOK Page 96 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
93Continued
If one of these indicators does not come on when it should, have your dealer check forproblems.
Torque Control indicator● Comes on when the ignition switch is turned to
the ON position. Goes off when your speedreaches approximately 3 mph (5 km/h) toindicate Torque Control is ready to work.
● Blinks when Torque Control is operating.
Torque Control OFF indicatorComes on when the Torque Control is turned off.Shift indicators (P.96)Comes on briefly when the ignition switch is turnedto the ON position.
Right turn signal indicator
Left turn signal indicator
If it comes on while riding: (P.183)
Low oil pressure indicatorComes on when the ignition switch isturned to the ON position. Goes offwhen the engine starts.If it comes on while engine isrunning: (P.181)
20170830152249_31MKF6100_enu_BOOK Page 97 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
94
Indicators (Continued)
Neutral indicator
High coolant temperature indicatorComes on briefly when the ignition switch is turnedto the ON position.If it comes on while riding: (P.180)
ABS (Anti-lock Brake System) indicatorCBR1000RA/S1/S2Comes on when the ignition switch is turned to theON position. Goes off when your speed reachesapproximately 6 mph (10 km/h).If it comes on while riding: (P.182)
Comes on when the transmission is in Neutral. High beam indicator
Low fuel indicator● Comes on briefly when the ignition switch is turned to the ON position.● Comes on when there is only reserve fuel left in the fuel tank. Remaining fuel when low
fuel indicator comes on: 1.1 US gal (4.0 L)If it comes on: (P.38)
20170830152249_31MKF6100_enu_BOOK Page 98 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
95Continued
HESD (Honda Electronic Steering Damper)indicatorComes on briefly when the ignition switch isturned to the ON position. If it comes on while engine is running:(P.182)
PGM-FI (Programmed Fuel Injection) malfunction indicator lamp (MIL)Comes on briefly when the ignition switch is turned to the ON position with the engine stopswitch in the (Run) position. Comes on when the ignition switch is turned to the ONposition with the engine stop switch in the (Stop) position.If it comes on while engine is running: (P.181)
Shift IndicatorsThe shift indicators light or blink by theengine revolutions. The first indicator lightswhen the engine revolutions reach 800 r/min(rpm) below a preset revolution number.The second, third and fourth indicators willlight with each 200 r/min (rpm) rise.All indicators will blink when enginerevolutions is reached the set value.
Setting of the shift indicatorsYou can change the engine revolutions atwhich the shift indicators start blinking.
Initial setting: OFFAvailable setting range: 4,000 - 16,600 r/min (rpm)
Example set value: 11,600 r/min (rpm)0 to 10,800 r/min (rpm)All indicators go off10,800 r/min (rpm)First indicator comes on11,000 r/min (rpm)Second indicator comes on11,200 r/min (rpm)Third indicator comes on11,400 r/min (rpm)Fourth indicator comes on11,600 r/min (rpm)All indicators blink
20170830152249_31MKF6100_enu_BOOK Page 99 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
96
Indicators (Continued)
20170830152249_31MKF6100_enu_BOOK Page 100 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
97
BLANK PAGE
Switches
20170830152249_31MKF6100_enu_BOOK Page 101 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
98
Headlight dimmer switch/Passing light control switch• : High beam• : Low beam
Turn signal switch
Horn button
u Pressing the switch turnsthe turn signal off.
Hazard switchSwitchable when the ignition switch is on. Can beturned to off regardless of the ignition switchposition.u The signals continue flashing with the ignition switch
is OFF or LOCK after the hazard switch is on.
LAP buttonOperate the lap timer
• : Flashes the high beam headlight.
20170830152249_31MKF6100_enu_BOOK Page 102 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
99Continued
Ignition SwitchSwitches the electrical system on/off, locksthe steering.u Key can be removed when in the OFF or
LOCK position.
ON
OFF
Turns electrical systemon for starting/riding.
Turns engine off.
LOCKLocks steering.
Engine stop switch/ Start buttonShould normally remain in the (Run) position.u In an emergency, switch to the (Stop) position to stop the engine.
Steering LockLock the steering when parking to helpprevent theft.A U-shaped wheel lock or similar device isalso recommended.
# Lockinga Turn the handlebars all the way to the left.b Push the key down, and turn the ignition
switch to the LOCK position.u Jiggle the handlebars if the lock is
difficult to engage.c Remove the key.
# UnlockingInsert the key, push it in, and turn the ignitionswitch to the OFF position.
20170830152249_31MKF6100_enu_BOOK Page 103 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
100
Switches (Continued)
TurnPush
Ignition key
b
a
Riding modeYou can change the riding mode.The riding mode consists of the followingparameters.
P: Engine output levelT: Torque control levelEB: Engine brake levelCBR1000S1/S2S: Suspension mode
When “-” is displayed, go to your dealer forservice.
20170830152249_31MKF6100_enu_BOOK Page 104 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
101Continued
Current riding mode
P valueT value EB value
S mode
Initial settingRiding modes P value T value EB value S mode CBR1000S1/S2
MODE 1 1 2 3 A1*2
MODE 2 2 5 3 A2*2
MODE 3 5 8 1 A3*2
USER 1 1*1 5*1 1*1 M1*3
USER 2 2*1 5*1 2*1 M2*3Notes:*1 : Value can be changed. *3 : S mode and setting of S mode can be changed*2 : Setting of S mode can be changed
Riding mode has five modes.Available riding mode: MODE 1, MODE 2,MODE 3, USER 1 and USER 2.MODE 1, MODE 2 and MODE 3u MODE 1 is suitable for track riding.u MODE 2 is suitable for winding roads.u MODE 3 is suitable for street riding.CBR1000RR/RAEach value can not be changed.
CBR1000S1/S2Each value and mode can not be changed.Setting of S mode can be changed.
USER 1 and USER 2CBR1000RR/RAEach value can be changed.CBR1000S1/S2Each value and mode can be changed.Setting of S mode can be changed.
20170830152249_31MKF6100_enu_BOOK Page 105 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
102
Riding mode (Continued)
P value (Engine output level)P value has five setting levels.Available setting range: 1 to 5u Level 1 has the most power.u Level 5 has the least power.
T value (Torque control level)T value has ten setting levels.Available setting range: 0 to 9u Level 1 is the minimum Torque Control level.u Level 9 is the maximum Torque Control level.u Level 0 deactivates/turns off the Torque
Control.
EB value (Engine brake level)EB value has three setting levels.Available setting range: 1 to 3u Level 1 has the strongest engine braking
effect.u Level 3 has the weakest engine braking
effect.
S mode (Suspension mode)CBR1000S1/S2S mode has six modes.Available modes: A1, A2, A3, M1, M2 and M3Adjusting the ÖHLINS Smart EC system(P.170)
20170830152249_31MKF6100_enu_BOOK Page 106 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
103Continued
Selecting the riding modea Stop the motorcycle.b Select the riding mode display. (P.102)c Press the SEL (up) or SEL (down)
button with the throttle fully closed.
20170830152249_31MKF6100_enu_BOOK Page 107 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
104
Riding mode (Continued)
SEL (up) button
SEL (down) buttonMODE button Press the SEL (up) button
Press the SEL (down) button
MODE 1
MODE 2
MODE 3
USER 1
USER 2
Setting the riding modeCBR1000RR/RAYou can change the P, T and EB values onthe USER 1 and USER 2 of the riding mode.CBR1000S1/S2You can change the P, T, EB value and Smode on the USER 1 and USER 2 of theriding mode.
a Stop the motorcycle.b Select the USER 1 or USER 2 in the riding
mode you want to set. (P.102)c Press and hold the MODE button until P
value is selected.d Press the SEL (up) or SEL (down)
button until the desired value is displayed.
e Press the MODE button until T value isselected.
f Press the SEL (up) or SEL (down)button until the desired value is displayed.u T value can be changed to level 0 by
pressing and holding the SEL (down)button at the time of level 1.
g Press the MODE button until EB value isselected.
h Press the SEL (up) or SEL (down)button until the desired value is displayed.
i CBR1000S1/S2Press the MODE button until S mode isselected.
20170830152249_31MKF6100_enu_BOOK Page 108 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
105Continued
j CBR1000S1/S2Press the SEL (up) or SEL (down)button until the desired mode isdisplayed.
k Press and hold the MODE button untilordinary display is displayed.
You can stop setting the riding modes at anytime by pressing and holding the MODEbutton.
20170830152249_31MKF6100_enu_BOOK Page 109 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
106
Riding mode (Continued)
20170830152249_31MKF6100_enu_BOOK Page 110 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
107
CBR1000RR/RA CBR1000S1/S2
CBR1000S1/S2
Press the MODE buttonPress and hold the MODE buttonPress the SEL (up) buttonPress the SEL (down) buttonPress and hold the SEL (down)button
Starting the EngineStart your engine using the followingprocedure, regardless of whether the engineis cold or warm.
NOTICE• If the engine does not start within 5 seconds, turn the
ignition switch to the OFF position and wait 10 secondsbefore trying to start the engine again to recoverbattery voltage.
• Extended fast idling and revving the engine candamage the engine, and the exhaust system.
• Snapping the throttle or fast idling for more than about5 minutes may cause exhaust pipe discoloration.
• The engine will not start if the throttle is fully open.
a Make sure the engine stop switch is in the (Run) position.
b Turn the ignition switch to the ON position.c Shift the transmission to Neutral ( N
indicator comes on). Alternatively, pull in theclutch lever to start your motorcycle with thetransmission in gear so long as the sidestand is raised.
d Press the start button with the throttlecompletely closed.
If the engine does not start:aOpen the throttle fully and press the start
button for 5 seconds.bRepeat the normal starting procedure.c If the engine starts, open the throttle slightly
if idling is unstable.d If the engine does not start, wait 10 seconds
before trying steps a & b again.
# If Engine Will Not Start (P.179)
20170830152249_31MKF6100_enu_BOOK Page 111 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
108
a
b
c
d
Shifting GearsYour motorcycle transmission has 6 forwardgears in a one-down, five-up shift pattern.
If you put the motorcycle in gear with theside stand down, the engine will shut off.
# Recommended Shift PointsShifting UpFrom 1st to 2nd 12 mph (20 km/h)From 2nd to 3rd 19 mph (30 km/h)From 3rd to 4th 25 mph (40 km/h)From 4th to 5th 31 mph (50 km/h)From 5th to 6th 37 mph (60 km/h)
Shifting DownFrom 6th to 5th 28 mph (45 km/h)From 5th to 4th 22 mph (35 km/h)From 4th to 3rd 16 mph (25 km/h)
NOTICEImproper shifting can damage the engine,transmission, and drive train. Also, coasting ortowing the motorcycle for long distances withthe engine off can damage the transmission.
20170830152249_31MKF6100_enu_BOOK Page 112 Wednesday, August 30 2017 15:45:50 JST
Operation Guide
109Continued
1
23
45
6
N
Quick ShifterCBR1000S1/S2This system enables very quick up and downshifting without clutch and throttleoperations.u This system does not function when
upshifting with the throttle closed.u This system functions when the engine
speed is more than 1,500 r/min (rpm) onupshifting or more than the idle speed ondownshifting.
u This system does not function when theclutch lever is being operated.
● If “-” is displayed on the gear positionindicator, the Quick Shifter system doesnot operate.
● If the Quick Shifter does not operatenormally, the c
Recommended