View
8
Download
0
Category
Preview:
Citation preview
Automatic Impact and Tensile test Specimen Preparation
Robot
Milling machine
Turnover station
Raw material station
Processed specimens station
Dimension measuring system
Laser marker
Datamatrix reader
The process of turning raw materials into specimens ready for testing is completely controlled by the automatic specimen preparation system. - No physical manipulation from an operator is required. - The system can run in fully automatic or in semi automatic mode. - From a single raw material piece, three charpy specimens are made.
Impact Test Specimen
Charpy V- specimen
Different types of specimens can be produced in the cell. Desired specimens are choosen from the predefined programs.
DF13- specimen
VF1- specimen
Tensile Test Specimen
Visual measuring of the notch radius
Measuring
Specifications
Capacity Impact specimen: 30-70 pieces/hour
or Tensile specimen: 30-50 pieces/hour or Simultaneous handling of both types
Impact specimen sizes Length = 55 mm - 10 x 10 - 7,5 x 10 - 5 x 10 - 2,5 x 10
Tensile specimen sizes DF13 T= 1,5 – 16 mm VF1 T= 1,5 – 7 mm Robot Cell size 3,5 x 5 m (required space: 5 x 6,5 m)
Robot 6- axis industrial robot
Milling station 4- axis milling machine with clamping devices for both impact and tensile test specimens.
CNC- controlled video measuring system (Impact specimen) - Height - Width - Length - Notch Radius - Notch Angle
Automatic marking system 20W YAG fibre laser with 100.000 hrs of burning time.
Automatic matrix reader Code reader capable of handling 1D, 2D, stacked or postal symbologies.
Automatic tool control Integrated tool wear and crash detection system.
Recommended