Automotive rear light reflector plastic injection …...Customer-Oriented & Quality-Adherence...

Customer-Oriented & Quality-Adherence http://upmold.comAugust 7, 2018

Automotive Rear Light Reflector Plastic Injection Mold Design Case

Injection Mold Design Study Case

Customer-Oriented & Quality-Adherence http://upmold.comAugust 7, 2018

Automotive rear light reflector

This reflector is for the Ford automobileOf Tourneo car.

Injection Mold Design Study Case

Customer-Oriented & Quality-Adherence http://upmold.comAugust 7, 2018 3

Part views

Injection Mold Design Study Case

Customer-Oriented & Quality-Adherence http://upmold.comAugust 7, 2018 4

Left hand & right hand reflector part view

Injection Mold Design Study Case

Customer-Oriented & Quality-Adherence http://upmold.comAugust 7, 2018 5

Fixed side perspective view

Injection Mold Design Study Case

Customer-Oriented & Quality-Adherence http://upmold.comAugust 7, 2018 6

Cavity side view

Injection Mold Design Study Case

Customer-Oriented & Quality-Adherence http://upmold.comAugust 7, 2018 7

These hot runner drops are directed on the surface normal to guarantee the gate location

smooth after injection

Drop layout on the mould design

Injection Mold Design Study Case

Customer-Oriented & Quality-Adherence http://upmold.comAugust 7, 2018 8

Hot runner system on the

cavitation

Injection Mold Design Study Case

Customer-Oriented & Quality-Adherence http://upmold.comAugust 7, 2018 9

Hot runner layout on the moving side of view

Injection Mold Design Study Case

Customer-Oriented & Quality-Adherence http://upmold.comAugust 7, 2018 10

Moving side perspective view

Injection Mold Design Study Case

Customer-Oriented & Quality-Adherence http://upmold.comAugust 7, 2018 11

Core structure view for the cores

Injection Mold Design Study Case

Customer-Oriented & Quality-Adherence http://upmold.comAugust 7, 2018 12

Very complicated structure at the cove side on this mold design

Injection Mold Design Study Case

Customer-Oriented & Quality-Adherence http://upmold.comAugust 7, 2018 13

Section view for complex structure one cavity of core

Injection Mold Design Study Case

Customer-Oriented & Quality-Adherence http://upmold.comAugust 7, 2018 14

Some view detail view at the core side

Injection Mold Design Study Case

Customer-Oriented & Quality-Adherence http://upmold.comAugust 7, 2018 15

The cooling system on the moving side

Injection Mold Design Study Case

Customer-Oriented & Quality-Adherence http://upmold.comAugust 7, 2018

Thanks for attention

16

Please contact us via info@upmold.com if you are interested about this complicated plastic injection mold design for the automobile rear light reflector of Ford.

Injection Mold Design Study Case