View
217
Download
0
Category
Preview:
Citation preview
8/20/2019 BGS Newsletter Oktober 2015 Englisch
1/27
8-Drawer Workshop Trolley PRO, empty
- high quality workshop design- heavy duty ball bearing castors, diameter 125 mm, thereof 2 castors lockable- lockable with central lock- 8 smooth running, ball bearing drawers,
fully extensible in the following sizes:- drawer 1 - 4: (w)57 x (d)40 x (h)4 cm, max. capacity 25 kg- drawer 5 - 7: (w)57 x (d)40 x (h)10 cm, max. capacity 30 kg- drawer 8: (w)57 x (d)40 x (h)15 cm max. capacity 30 kg- each drawer individually secured- work plate with 5 storage compartments- side storage compartment: (w)37 x (d)7,5 x (h)7,8 cm- handle can be mounted on both side- dimensions: (h)103 x (w)73 x (d)48 cm- empty weight: 89 kg- max. weight (incl. tools): 300 kg
Item #
4111
Tray for Workshop Trolley PRO (BGS 4111)
- especially suitable for spray and
oil cans, tools, parts, etc.- dimensions (inside): 297 x 77 x 53 mm- can be attached to pre-punched holes
Item #
67163
Document Tray for Workshop Trolley PRO (BGS 4111)
- especially suitable for documents, but also for tools, parts, etc.
- dimensions (inside): 297 x 105 (55) x 220 mm- can be attached to pre-punched holes
Item #
67162
New
I t emsOct ob er 2 0 1 5
750
8/20/2019 BGS Newsletter Oktober 2015 Englisch
2/27
Paper Roll Holder for Workshop Trolley PRO (BGS 4111)
- suitable for paper rolls with max. diameter 300 mm and max. width 275 mm- can be attached to pre-punched holes
Item #
67161
Wood Panel Insert for Workshop Trolley Pro BGS 4111
- suitable for mid-field in the plastic hood- dimensions: 470 x 390 x 12 mm
Item #
67165
Plastic Hood for Workshop Trolley PROFI (BGS 4111)
- dimensions: 730 x 475 mm
Item #
67164
6-piece Drawer Divider for Workshop Trolley PRO (BGS 4111)
- consists of 2 support rails and 4 divider sheets- support rails with 17 divider plate holding slots, with distance of approx. 2.5 cm
Item #
67166
N e w
I t e m s O c t o b e r 2 0 1 5
751
8/20/2019 BGS Newsletter Oktober 2015 Englisch
3/27
Tool Box with 4 Drawers
- can be fitted on top of BGS 4111- 8 smooth running, ball bearing drawers, fully extensible, in the following sizes:- drawer 1 - 3: (w)57 x (d)40 x (h)4 cm- drawer 4: (w)57 x (d)40 x (h)7 cm
- each drawer individually secured- 1 large storage compartment with lockable and hydraulically operated closure lid, inside dimensions: (w)61 x (d)42 x (h)7.5 cm- side storage: (w)37 x (d)7.5 x (h)7.8 cm- box with side-mounted handles- dimensions: (h)43 x (w)73 x (d)48 cm- weight: approx. 44 kg- drawer capacity: each 25 kg
Item #
4112
Workshop Trolley Pro Standard with 234 tools
- consisting of Workshop Trolley (BGS 4111)- and following 7 tool trays made from high-resistance foam:- 1/3 Tool Trays for Workshop Trolleys:- 3-piece Pliers Set (BGS 4021)- 3-piece Flashlight & Magnetic Lifter / Lamp (BGS 4032)- 2-piece Machinists and Stoning Hammer Set (BGS 4046)- 3/3 Tool Trays for Workshop Trolleys:- 22-piece Combination and E-Type Ring Spanners (BGS 4012)- 23-piece Screwdriver Set (BGS 4014)- 80-piece Ratchet and Socket Set (BGS 4015)
- 101-piece Bits and Bit Sockets (BGS 4017)
Item #
4113
New
I t emsOct ob er 2 0 1 5
752
8/20/2019 BGS Newsletter Oktober 2015 Englisch
4/27
Workshop Trolley Pro Standard Max including 243 tools
- consisting of Workshop Trolley (BGS 4111) and tool box (BGS 4112)- includes following 5 tool trays made from high-resistance foam:- 3/3 Tool Trays for Workshop Trolleys:
- 17-piece Pliers Assortment, Hammer, Pin Punch (BGS 4011)- 22-piece Combination and E-Type Ring Spanners (BGS 4012)- 23-piece Screwdriver Set (BGS 4014)- 80-piece Ratchet and Socket Set (BGS 4015)- 101-piece Bits and Bit Sockets (BGS 4017)
Item #
4088
N e w
I t e m s O c t o b e r 2 0 1 5
753
8/20/2019 BGS Newsletter Oktober 2015 Englisch
5/27
Workshop Trolley Profi Exclusive including 259 tools
- Workshop Trolley (BGS 4111)- includes following 19 tool trays made from high-resistance foam:- 1/3 Tool Trays for Workshop Trolleys:- 26-piece 3/8" Socket Set (BGS 4052)
- 40-piece 1/4" Socket Set (BGS 4054)- 12-piece 1/2" Internal Hexagon Bit Socket Set (BGS 4092)- 27-piece Bit and Bit Socket Assortment (BGS 4097)- 11-piece 1/4" 6-pt. Deep Sockets, 4-13 mm (BGS 4059)- 11-piece 3/8" 6-pt. Deep Sockets, 8-19 mm (BGS 4058)- 9-piece 1/2" 6-pt. Deep Sockets, 10-24 mm (BGS 4057)- 12-piece Combination Spanner, 6-22 mm (BGS 4082)- 8-piece Double Ring Spanner Set, deep offset (BGS 4084)- 3-piece Pliers Set (BGS 4021)- 4-piece Circlip Pliers Set (BGS 4025)- 2-piece Machinists and Stoning Hammer Set (BGS 4046)- 4-piece Grip Pliers (BGS 4040)- 17-piece Extension Bar, Adapter & Joint Set (BGS 4051)- 3-piece Flashlight & Magnetic Lifter / Lamp (BGS 4032)- 2/3 Tool Trays for Workshop Trolleys:- 12-piece Ratchet Ring-Open End Spanner,
90° tiltable (BGS 4077)- 27-piece 1/2" Socket Set (BGS 4053)- 12-piece Screwdriver Set (BGS 4122)- 3/3 Tool Tray for Workshop Trolleys: 18-piece Tyre Service Tools (BGS 4047)
Item #
4114
New
I t emsOct ob er 2 0 1 5
754
8/20/2019 BGS Newsletter Oktober 2015 Englisch
6/27
Workshop Trolley "Trainee" including 151 tools
- Workshop Trolley (BGS 2004)- includes following 7 tool trays made from high-resistance foam:- 1/3 Tool Trays for Workshop Trolleys:- 2-piece Machinists and Stoning Hammer Set (BGS 4046)
- 12-piece Combination Spanner, 6-22 mm (BGS 4082)- 8-piece Double Ring Spanner Set, deep offset (BGS 4084)- 49-piece Combination Bit Set (BGS 4093)- 41-piece 1/4" Socket Set (BGS 4054)- 2/3 Tool Trays for Workshop Trolleys:- 12-piece Screwdriver Set (BGS 4122)- 27-piece 1/2 Socket Set (BGS 4053)
Item #
4086
N e w
I t e m s O c t o b e r 2 0 1 5
755
8/20/2019 BGS Newsletter Oktober 2015 Englisch
7/27
Workshop Trolley "Tyre Service" including 82 tools
- Workshop Trolley (BGS 2004)- includes following 4 tool trays made from high-resistance foam:- 1/3 Tool Trays for Workshop Trolleys:- 54-piece Tyre Repair Set
- 7-piece Measuring Tool Set- 3-piece Flashlight & Magnetic Lifter / Lamp- 1/3 Tool Tray for Workshop Trolleys:- 18-piece Tyre Service Tools
Item #
4087
1/3 Tool Tray for Roller Cabinets: 54-piece Tyre Repair Set- consisting of:- tire radial inserts, 50-pc., 102 mm length- assembly paste for tire repair inserts- stitch awl and inserts installing tool- safety cutter
Item # Description
4124 1/3 Tool Tray for Workshop Trolleys: 54-piece Tyre Repair Set
4124-1 1/3 Tool Tray for Roller Cabinets, empty: for 54-piece Tyre Repair Set
New
I t emsOct ob er 2 0 1 5
756
8/20/2019 BGS Newsletter Oktober 2015 Englisch
8/27
3/3 Tool Tray for Roller Cabinets: 18-piece Tyre Service Tools
- consisting of:- plastic scraper set, 19-22-25-38 mm- wheel balancing weight pliers, 240 mm- thread tap for tire valves- 1/4" special socket for steel tire valves
- 1/2" protective impact sockets with plastic coating, sizes 15 - 17 - 19 - 21 mm- valve core torque tools, 0.25 - 0.45 nm- tire / valve tool- tire valve installer- workshop torque wrench, 1/2", 40-200 nm- tire lever with plastic protection cover, 500 mm
Item # Description
4047 3/3 Tool Tray for Workshop Trolleys: 18-piece Tyre Service Tools
4047-1 3/3 Tool Tray for Roller Cabinets, empty: for 18-piece Tyre Service Tools
3/3 Tool Tray for Workshop Trolleys: 11-piece T-handle Universal Joint Socket Set 8-19 mm
- includes following tools:
- T-handle Universal Joint Socket- sliding bar and universal joint- sizes: 8 - 10 - 11 - 12 - 13 - 14 15 - 16 - 17 - 18 - 19 mm- length: 340 mm- T-bar width: 200 mm
Item # Description
8880-2 3/3 Tool Tray for Workshop Trolleys: 11-piece T-handle Universal Joint Socket Set 8-19 mm8880-1 3/3 Tool Tray for Workshop Trolleys, empty: for T-Handle Universal Joint Socket Set 8-19 mm
21-piece Rim Lock Dismantling Sockets for BMW
- for dismantling of the original BMW rim locks- sockets with 17 mm hexagonal drive- includes rim lock sockets in following sizes: 30/13 pt. - 31/15 pt. - 32/16 pt. - 12/14 pt. 11/15 pt. - 33/17 pt. - 34/16 pt. - 35/19 pt. 16/10 pt. - 15/11 pt. - 14/12 pt. - 36/20 pt. 37/21 pt. - 38/22 pt. - 40/23 pt. - 18/13 pt. 17/7 pt. - 20/9 pt. - 19/8 pt.- 1/2" protective impact socket, 17 mm- in tool tray
Item #
8932
N e w
I t e m s O c t o b e r 2 0 1 5
757
8/20/2019 BGS Newsletter Oktober 2015 Englisch
9/27
23-piece Rim Lock Dismantling Sockets for VAG
- for dismantling of the original VAG rim locks- rim lock sockets with 17 mm hexagonal drive- includes rim lock sockets in following sizes: 51/6 pt. - 52/7 pt. - 53/8 pt. - 55/10 pt. 56/11 pt. - 57/12 pt. - 58/13 pt.
60/15 pt. - 61/16 pt. - 62/17 pt. ABC0/10 pt. - ABC1/11 pt. - ABC2/13 pt. ABC3/14 pt. - ABC4/15 pt. - ABC5/16 pt. ABC6/17 pt. - ABC7/19 pt. - ABC8/20 pt. ABC9/21 pt.- 1/2" protective impact socket, 17 mm- in tool tray
Item #
8933
1/4" Bit Socket Set, Internal Hexagon, 1/8" - 3/8" SAE
- sizes: 1/8" - 5/32" - 3/16" - 7/32" - 1/4" - 5/16" - 3/8"
- lenght: 38 mm- knurled- satin chrome finish- on chrome metal rail
Item #
2166
1/2" T-Star Bit Sockets, Tamperproof
- knurled- satin chrome finish
Item # Description
4326 1/2" T-Star Bit Socket, Tamperproof, T40
4327 1/2" T-Star Bit Socket, Tamperproof, T45
4328 1/2" T-Star Bit Socket, Tamperproof, T50
4329 1/2" T-Star Bit Socket, Tamperproof, T55
1/2" Internal Hexagon Bit Sockets
- knurled- satin chrome finish
Item # Description
5052-17 1/2 Bit Socket, Internal Hexagon, 17 mm
5052-19 1/2 Bit Socket, Internal Hexagon, 19 mm
New
I t emsOct ob er 2 0 1 5
758
8/20/2019 BGS Newsletter Oktober 2015 Englisch
10/27
8/20/2019 BGS Newsletter Oktober 2015 Englisch
11/27
Workshop Screwdrivers
- 2 compoment handle- black screwdriver tip
Item # Description
4928 Workshop Screwdriver, Plain Slot 3 x 60 mm
4929 Workshop Screwdriver, Plain Slot 4 x 80 mm
4930 Workshop Screwdriver, Plain Slot 5.5 x 125 mm
4931 Workshop Screwdriver, Plain Slot 6.5 x 150 mm
4932 Workshop Screwdriver, PZ1 x 75 mm
4933 Workshop Screwdriver, PZ2 x 100 mm
4934 Workshop Screwdriver, PZ3 x 150 mm
4935 Workshop Screwdriver, PH1 x 80 mm
4936 Workshop Screwdriver, PH2 x 100 mm
4937 Workshop Screwdriver, PH3 x 150 mm
1/4" Digital Torque Scewdriver, 1 - 10 Nm
- for tightening and loosening of screws with left- and right-hand threads- ideal suitable for e.g. installation of tire pressure sensors- drive: 1/4" inside hexagon- incl. adapter 1/4" outside hex. to 1/4" outside 4-pt.- torque range: 1 - 10 Nm (10 - 100 in-lb)- accuracy clockwise: +- 1%- accuracy counter clockwise: +- 1.5%- operating mode: peak & track- memory: 10 readings- unit selection: Nm, Ft-lb, In-lb, Kg-m- battery: 3x 1.5V UM-4 (AAA)- operating temperature: -10°C ~ 55°C
- humidity: 0 ~ 90%- storage temperature: -40°C ~ 85°C
Item #
956
4-piece Water Pump Pliers Set
- professional quality- high quality lacquered black finish- forged and hardened- polished jaws and joints- PVC dipped handles- includes 4 different pliers sizes
- pliers size / max. opening 175 mm / 27 mm 240 mm / 38 mm 300 mm / 44 mm 400 mm / 80 mm
Item #
457-2
New
I t emsOct ob er 2 0 1 5
760
8/20/2019 BGS Newsletter Oktober 2015 Englisch
12/27
Special Locking Ring Pliers
- for dismantling / installing of locking rings without eylets- suitable for e.g. wheel bearing locking rings on Citroen- special design of the plier tips allows easy removing of locking rings- length: 215 mm
- opening width: max. 41 mm
Item #
8936
Clutch Basket Holding Pliers
- for loosening clutch baskets, chain sprockets, etc.- holding pins Ø 8 mm x 10 mm length and 37 mm retaining legs- max. opening: 125 mm- length: 300 mm
Item #
8944
Die Holder
- for holding threading dies- steel handles, detachable- retaining head from die-cast zinc with fixing screws for fixing the cutting die
Item # Description
940 Die Holder, #1 20 x 5 mm
941 Die Holder, #2 20 x 7 mm
942 Die Holder, #3 25 x 9 mm
943 Die Holder, #4 30 x 11 mm
944 Die Dolder, #5 38 x 14 mm
1893-2 Die Holder, #6 50 x 15 mm
Tap Wrench
- for holding taps- steel handles, detachable- housing made of die-cast zinc- jaws made of steel
Item # Description945 Tap Wrench, #1 M1 - M10
946 Tap Wrench, #1 M4 - M12
1893-1 Tap Wrench, #3 M6 - M25
N e w
I t e m s O c t o b e r 2 0 1 5
761
8/20/2019 BGS Newsletter Oktober 2015 Englisch
13/27
6-piece Parallel Pin Punch Set, 3-8 mm, 150 mm length
- 3 - 4 - 5 - 6 - 7 - 8 mm- hardened, colored shaft
Item # Description
1651 6-piece Parallel Pin Punch Set, 3-8 mm, 150 mm length
1651-3 Parallel Pin Punch 3 mm, 150 mm length
1651-4 Parallel Pin Punch 4 mm, 150 mm length
1651-5 Parallel Pin Punch 5 mm, 150 mm length
1651-6 Parallel Pin Punch 6 mm, 150 mm length
1651-7 Parallel Pin Punch 7 mm, 150 mm length
1651-8 Parallel Pin Punch 8 mm, 150 mm length
6-piece Air Hammer Drift Set
- allows the extraction of shafts, screws, etc. if stuck in deep holes- includes the six most commonly used sizes: 5.2 - 6.5 - 6.9 - 7.7 - 9.3 und 12.7 mm- round shaft, Ø 10 mm- length: 177 mm
Item #
8943
Pro Rivet Nut Riveter, M3 - M13
- ideal for hard to reach places
- for rivet nuts M5, M6, M8, M10, M12- suitable for aluminum and steel rivet nuts- nosepiece / mandrel pairs M5, M6, M8, M10, M12- incl.10 pieces of each rivet nuts M5, M6, M8, M10, M12- max. stroke: 9 mm- length: 330 mm- weight: 1100 g
Item #
408
Diesel Pump Locking Pin for Mercedes
- for locking Bosch inline Diesel pump in mounting position- to be used as OEM 601 589 05 21 00- suitable for Mercedes 200D / TD, 250D / TD, 300D / TD- engines: 601.912 / 602.912 / 602.962 603.913 / 606.910 / 603.963
Item #
8905
New
I t emsOct ob er 2 0 1 5
762
8/20/2019 BGS Newsletter Oktober 2015 Englisch
14/27
8/20/2019 BGS Newsletter Oktober 2015 Englisch
15/27
Spark Plug Puller for BMW Motorcycles
- for pulling the spark plugs plug and loosening the 22 mm internal hexagon front axle (Note: additional sliding bar required, not suitable for water-cooled R 1200 GS)- sliding bar bore: 19 mm
- material: aluminum
Item #
8939
Camshaft Sprocket Locking Tool for VW 1.8 / 2.0 TFSI
- for locking the inlet and exhaust camshafts when loosening the central screws
Item #
8940
Camshaft Spacers for VAG
- used for locking sliding pieces on camshaft- suitable for 4-cyl. petrol direct injection, 2.0 turbo 4 valve engines e.g. Audi A4 2008>, Audi Q5 2009>- to be used as OEM T40191
Item #
8946
Engine Timing Tool Set for VAG 2.0 TFSI
- for checking and setting the engine timing on VAG 2.0L TFSI engines with code CAEB as of 2009- includes following tools:- crankshaft counterholding tool,
to be used as OEM T10355- crankshaft thrust piece, to be used as OEM T10368- camshaft locking bolt (4x), to be used as OEM T40196- chain tensioner locking clip (2x), to be used as OEM T40267- chain sprocket locking tool (2x), to be used as OEM T40271- camshaft control valve tool, to be used as OEM T10352
Item #
8951
New
I t emsOct ob er 2 0 1 5
764
8/20/2019 BGS Newsletter Oktober 2015 Englisch
16/27
Fuel Injector Tool for BMW N20 & N55
- for disassembly and assembly of fuel injectors on gasoline direct injection engines N20 & N55
Item #
8907
Intermediate Lever Spring Tool for BMW
- for disassembly and assembly of pressure springs on valve intermediate lever- suitable for BMW engines N20, N51, N52, N52K, N52T, N55- ensures quick, easy and safe handling of these high-force springs- to be used as OEM 114270
Item #
8921
Universal 3-Leg Bearing Ring Puller
- for removing of bearing ring and sleeves- ultra sharp jaw edges allow to clamp in between 0.5 mm- suitable for bearing rings and sleeve diameters from 10 to 125 mm- extractor can be pre-tensioned by closing the cone
Item #
8903
Front Wishbone Bush Tool for VAG
- for the removal / installation of the rear mounting bush on the front lower wish bone- can be used without removing the wish bone- suitable for following models: - Seat Cordoba III (2003 onwards) - Skoda Fabia (2000 onwards) - VW Polo IV (2002 onwards)- spindle nut with 24 mm 6-pt. drive
Item #
8589
N e w
I t e m s O c t o b e r 2 0 1 5
765
8/20/2019 BGS Newsletter Oktober 2015 Englisch
17/27
Front Control Arm Bush Tool for BMW Mini
- for easy removal / installation of the front control arm bush without removing the control arm- suitable for Mini One, Cooper, Cooper S (2001 on), R50 / R53 Chassis W10 / W11 / W17- to be used as OEM 31126757551
Item #
8842
Rear Subframe Bush Tool for Ford Mondeo
- for removing and installing the rear sub frame bushes- suitable for Ford Mondeo MK3 01-07 Hatchback and Saloon
Item #
8843
Trailing Arm Bush Tool for Opel Vectra
- for removing and installing the rear upper and lower bushes on trailing arm suspensions- suitable for Opel (Vauxhall) Vectra 1.6, 1.8, 2.0 (95-) and 2.5 (96-)- can be used directly on car, without removing the trailing arm
- nut with thrust bearing- made from high tensile steel for extra strength
Item #
8875
1/2" Impact Wrench, 610 Nm
- square drive: 1/2"- max. torque: 610 Nm- working pressure: 90PSI (6.3 Bar)- air inlet: 1/4"- air consumption: 198.1 l/min (7 cfm)- noise level: LpA= 89.5 dB (A) LwA= 100.5 db (A)- vibration: ahd = 5.63 m/s² K = 1.05 m/s²
Item #
3246
New
I t emsOct ob er 2 0 1 5
766
8/20/2019 BGS Newsletter Oktober 2015 Englisch
18/27
Air Plug Nipple with 1/4" Male Thread
- fits on most pneumatic tools
Item #
3222-1
Air Plug Nipple with 3/8" Male Thread
- fits on most pneumatic tools
Item #
3222-4
Air Quick Coupling with 8 mm Hose Connection
- fits on most pneumatic tools- is required for connect hoses
Item #
3226-1
Air Plug Nipple with 10 mm Hose Connection
- fits on most pneumatic tools- is required for connect hoses
Item #
3222-3
Air Plug Nipple with 8 mm Hose Connection
- fits on most pneumatic tools- is required for connect hoses
Item #
3222-2
N e w
I t e m s O c t o b e r 2 0 1 5
767
8/20/2019 BGS Newsletter Oktober 2015 Englisch
19/27
Fuel Filter Tool for Diesel JTD / CDTi / DDiS / TiD / VCDi / Hdi
- for exchanging the fuel filter on Chevrolet, Citroen, Fiat, Saab, Suzuki, Opel, Vauxhall with following engines: - 1,3 JTD / CDTi / DDiS - 1,9 JTD / CDTi / TiD
- 2,0 VCDi / HDi / JTD - 2,2 HDi / JTD - 2,8 HDi / JTD - 3,0 HDi / JTD
Item #
8935
Flexible Funnel, 22x12 cm
- particularly useful in poorly accessible oil filling openings- malleable
Item #
8446-1
Oil Drum Funnel for emptying of oil filters, for 200L drums- discharge of waste oil and drop of oil filters- to be placed on 200L barrels- secure fit- reduces the risk of spillage- material: PP, black- capacity: 20L- diameter: 600 mm- weight: 1.7 Kg
Item #
8942
New
I t emsOct ob er 2 0 1 5
768
8/20/2019 BGS Newsletter Oktober 2015 Englisch
20/27
Mechanic's Protection Mat 1200 x 435 x 35 mm
- allows comfortable working under the vehicle- foldable, requires little storage space- with headrest and carrying strap
Item #
4805
3-piece Panel Romoval Wedge Set for VW- for dismantling e.g. door panels, under-seat drawers, etc.- suitable for VW EOS, Polo, Passat, etc.- to be used as VW OEM: T10383 - T10383/1 - T10383/2
Item #
8920
160-piece Grub Screw Assortment
- includes the following grub screws- with standard thread: 15x M3x5 mm - 15x M4x5 mm - 20x M6x6 mm 10x M6x10 mm - 20x M8x10 mm - 10x M5x6 mm 10x M8x12 mm - 10x M10x10 mm - 10x M10x12 mm- with fine thread: 15x M6x6 mm - 15x M8x10 mm - 10x M10x10 mm- made of steel- according to DIN 913
Item #
14135
150-piece Cap Hex Nut Assortment
- includes following cap hex nuts: 30x M3 - 30xM4 - 30xM5 - 30xM6 - 20xM8 - 10xM10- made of nickel plated steel- according to DIN 1587
Item #14130
N e w
I t e m s O c t o b e r 2 0 1 5
769
8/20/2019 BGS Newsletter Oktober 2015 Englisch
21/27
255-piece Automotive Clip Assortment
- includes following clips:- 30 pc. Door Moulding Clip, to be used as VW / Audi OE No. 6U085733- 20 pc. Trunk Lining Retainer to be used as OE No. VW N9020160H, Ford 6998849,
BMW 514719044317, Opel 2207713 and suitable for many other vehicles- 30 pc. Drive Rivet, to be used as OE No. VW / Audi N0385501, Peugeot 781424 and suitable for many other vehicles- 5 pc. Round Retaining Clip, to be used as VW / Audi OE No. 1H0868243B- 30 Stk. Screw Grommet 15 x 12 mm, to be used as VW / Audi OE No. N90833801 and suitable for many other vehicles- 20 pc. Retainer Clip, to be used as OE No. VW 3A0853575, Audi 3A0853575A - 15 pc. Moulding Clip 34,9 x 21,9 mm, to be used as OE No. VW 4A0853825,
Audi 4A0853825A - 10 pc. Retaining Clip 22 x 25 x 10 mm, to be used as VW / Audi OE No. 3B0853576- 25 pc. Retaining Clip, to be used as VW OE No. 1H0819055B01C and suitable for many other vehicles- 15 pc. Retaining Clip, to be used as VW OE No. 443853909A - 30 pc. Push-type Retainer, to be used as VW OE No. 171885767 and suitable for many other vehicles- 25 pc. Plastic Screw Nut, to be used as VW OE No. 191941142
Item #
8129
Additional Shelf 100 x 47 cm for Presentation Board BGS 49
Item #
49-3
New
I t emsOct ob er 2 0 1 5
770
8/20/2019 BGS Newsletter Oktober 2015 Englisch
22/27
BGS Poster
- size: DIN A1- comes in mailing box
Item #
POSTER
N e w
I t e m s O c t o b e r 2 0 1 5
771
8/20/2019 BGS Newsletter Oktober 2015 Englisch
23/27
40-piece Socket Set
- includes the following tools:- 1/4" reversible ratchet, length 110 mm, with 1/4" int. hex. bit drive- 1/4" extension bar, 70 mm- reversible ratchet handle with
with 1/4" int. hex. bit drive- 1/4" sockets: 5 - 6 - 7 - 8 - 10 mm- 1/4" cross bits: PH0 - PH1 - PH2 - PH3 - PZ0 - PZ1 - PZ2 - PZ3- 1/4" internal hexagon bits: 2 - 2.5 - 3 - 4 - 5 - 5.5 - 6 - 7 mm- 1/4" slot bits: 3 - 4 - 4.5 - 5 - 5.5 - 6 - 6.5 - 7 mm- 1/4" T-star bits: T8 - T10 - T15 - T20 - T25 - T27 - T30 - T40
Item #
20102
1/2" Socket Set, 10-11-13 mm- satin chrome finish
Item #
15123
1/2" Socket Set, 15-17-19 mm
- satin chrome finish
Item #
15125
HDI Injector Puller
- allows the extraction of Bosch and Siemens HDI injectors- disassembly of cylinder heads is not necessary- suitable for most vehicles PSA 2.0 HDI DW10, DW12 engines also on Toyota, Mazda, Hyndai
Item #
98349
N e w
I t e m
s O c t o b e r 2 0 1 5
773
8/20/2019 BGS Newsletter Oktober 2015 Englisch
24/27
Engine Timing Tool Set for VAG 2.5 / 4.9D / TDI Pump-Nozzle
- suitable for VW T5 as of 2004, Touareg and Phaeton as of 2003 with 5 and 10 cylinder engines- camshaft locking tool for review and adjustment, suitable for 5 and 10 cylinder engines, to be used as OEM T10193
- camshaft locking tool for review and adjustment of 10 cylinder engines, to be used as OEM T10194- clamping device for removal and replacement of the camshaft sprockets of 5 and 10 cylinder engines, to be used as OEM T10199- special socket for rotating the crankshaft of 5 cylinder engines, to be used as OEM T10225- crankshaft locking wrench for 5 cylinder engines, to be used as OEM T10226- tensioner wrench
Item #
98443
Silent Bearing Tool Set, VW Polo 9N
- for easy and safe removal and replacemant of silent blocks directly on the vehicle- no removal necessary, minimizing the workload- contains spindle, spindle extension, shoulder nut, spindle adaptor M10x1.25 made of S45C carbon steel- spacer, pressure part, centering mandrel made from aluminium alloy
Item #
98253
52-piece Wheel Bearing Mounting Disc Set
- suitable for mounting of bearings, sealing rings and rubbers- particularly useful when used with hydraulic presses- this kit includes mounting discs in following sizes: 18 - 65 mm (1 mm steps) and 74 mm
- 180 mm x Ø12 mm metal handle for assembly using a hammer- made from carbon steel
Item #
98467
New
I t emsOct ob er 2 0 1 5
774
8/20/2019 BGS Newsletter Oktober 2015 Englisch
25/27
21-piece Wheel Bearing Mounting Disc Set XXL
- suitable for mounting of bearings and sealing rings- particularly useful when using with hydraulic presses- this kit includes 17 mounting pads Ø 70 to 150 mm (5 mm steps)- 273 mm metal handle for use with hammer
- material: carbon steel
Item #
98736
9-piece Punch Set, 2.5 - 10 mm- for punching of leather, textiles, paper- sizes: 2.5 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 mm- material ejection slot
Item #
50619
Universal Scraper, with 5 Blades
- for removing e.g. adhesive residues on glass, seal residues during engine repairs, etc.- blade width: 38 mm- with safety cap
Item #
85816
Stop Bracket 250 mm
- hardened measuring leg
Item #
50888
N e w
I t e m
s O c t o b e r 2 0 1 5
775
8/20/2019 BGS Newsletter Oktober 2015 Englisch
26/27
Sheet Steel Clamps, lightweight type
- dip coated handle and clamping jaws
Item # Description
59811 Sheet Steel Clamps, lightweight type, 100 mm
59813 Sheet Steel Clamps, lightweight type, 150 mm
Plastic Transport Roller (Home Trolley), 80 x 105 x 30 mm
- for transporting of heavy loads- turning plate allows easy maneuvering- 4 double castors, mounted on steel axis- with towing eye- max. carrying capacity: 150Kg- made of unbreakable plastic
Item #
80340
Padlocks Type S - XXL
- hardened shackle
Item # Description
85130 Padlock Type S-32 mm
85140 Padlock Type L-38 mm
85150 Padlock Type XL-46 mm
85160 Padlock Type XXL-60 mm
4-piece Padlock Set, keyed alike, Type L-35 mm
- hardened shackle
Item #
85164
Padlock Type L, extra high bow
- hardened shackle
Item #
85168
New
I t emsOct ob er 2 0 1 5
776
8/20/2019 BGS Newsletter Oktober 2015 Englisch
27/27
Joist Hangers
- galvanized
Item # Description
80902 Joist Hanger 46 x 105 mm
80904 Joist Hanger 80 x 120 mm
80906 Joist Hanger 100 x 140 mm
Punched Mounting Band 20 mm, 10 m Role
- double row perforated- galvanized
Item #
80900
N e w
I t e m
s O c t o b e r 2 0 1 5
Recommended