View
12
Download
0
Category
Preview:
Citation preview
Bio-Data
NAME : SUDHEER KUMAR BATTULA
DESIGNATION : Sr.Assistant Professor
AREAS OF RESEARCH : Mechancal Vibrations
EMAIL : sudheerbattula1984@gmail.com
PHONE : 7893924491
DATE OF JOINING : 07/09/2011
DATE OF BIRTH : 25/12/1984
Educational Qualifications: B.Tech.M.E (Ph.D)
Degree Branch/Specialization College University Year of Admission
Year of Pass
% of marks
UG Mechanical PVP SIT JNTUH 2002 2006 60.41
PG Mechanical/Machine
Design AU AU 2006 2008 74.86
PhD Mechanical/Vibrations AU AU 2014 Pursuing
Experience Summary: Teaching: 11 Years Industry: Nil Research: Nil Total: 11 Yrs
S.No. College University
Post held Duration Ratified
(Y/N) Date of
Ratification Exp. in yrs
From To
1 LBRCE JNTUK Sr.Assistant Professor 1/5/17
Till Date N 2.0
2 LBRCE JNTUK Assistant Professor 7-9-11
30-06-11
Y 2013 6.0
3 DVR&Dr.HS
MIC College
of
Engineering
JNTUK
Assistant Professor
8/11/08 6/9/11 Y 2010 3.0
COURSES HANDLED: Finite Element Method, Tribology, Machine Design-I&II, Kinematics of Machines, Dynamics of
Machines, Theory of Machine, Strength of Materials, Machine Drawing, Engineering Mechanics
,Engineering Graphics. Professional Activities:
PUBLICATIONS:
Journals:
B.Sudheer Kumar. Rama Murthy Raju, Ch.Ratnam” Engine Isolation Angular Mount With Different Types Elastomers” Materials Today Proceedings Elsevier Oct-2018. ISBN: 19555-19564 Scopus Indexed.
B.Sudheer Kumar. Rama Murthy Raju, Ch.Ratnam” Shock and Vibration Prevention Using Angular Mounts with Different Types of Oil-Based Elastomers”. Advanced in Manufacturing Process, Lecture Notes in Mechanical Engineering, Springer, Singapore. Oct – 09. 2018 ISBN 978-981-13-1724-8 Scopus Indexed.
B.Sudheer Kumar, T.Venkateswara Rao, KND.Malleswara Rao, V.Shankar Rao
“Flexural Properties of Bamboo Fiber Reinforced Hybrid Composite” International
Journal of Innovative Research in Technology Volume 4 issue 8 ISSN: 2349-6002 Jan-
2018.
B.Sudheer Kumar, “Effect of Mechanical Properties on Polyester Typha Fiber in
Composition of Wood Power and Coconut Shell Ash“International Journal of
Engineering Technology Science and Research Vol 2 issue 4, April’15.
B.Sudheer Kumar, Design and simulation of MEMS based piezoelectric shear actuated
beam “American Journal of materials sciences” Volume.2 issue No.5 oct-2012.
B.Sudheer Kumar Design and analysis of MEMS based composite piezoelectric ultrasonic
transducer “Electrical and electronics engineering” Volume.2 (6) issue No.3 dec-2012.
B.Sudheer Kumar Tensile properties of long jute fiber reinforced polypropylene
composites” International journal of engineering inventions ISSN NO: 2278-7461
2012Sep.
B.Sudheer Kumar Investigation on sol-gel synthesis, morphology and characterization of
zinc oxide nano particles “International journal of engineering research &technology”
ISSN NO: 2278-0181 2012 Aug.
B.Sudheer Kumar Characterization of AL-SI casting alloys reinforced with Nano Sic
composites” International journal of engineering research & technology” ISSN NO:
2278-0181 2012 Aug.
B.Sudheer Kumar Preventing shock and vibrations using angular mount with polyurethane
elastomer“International journal of statistika and mathematika” ISSN: 2249-8605 2012
July.”
A) Conferences:, Books / Chapters Published:
B.Sudheer Kumar. Rama Murthy Raju, Ch.Ratnam” Engine Isolation Angular Mount With Different Types Elastomers” Materials Today Proceedings Elsevier ICMPC Oct-2018. ISBN: 19555-19564.
B.Sudheer Kumar. Rama Murthy Raju, Ch.Ratnam” Shock and Vibration Prevention Using Angular Mounts with Different Types of Oil-Based Elastomers”. In: K.S. Vijay Sekar et al. (Eds) Advanced in Manufacturing Process, Lecture Notes in Mechanical Engineering, Springer, Singapore. Oct – 09., 2018
Doi.org/10.1007/978-981-13-1724-8_57., ISBN978-981-13-1724-8
B.Sudheer Kumar, Malleswarao KND, Kumar R.P, VenkateswaraRao “Investigation of Mechanical /Tribological properties of composite Ersatz Articular Cartilage with Nano fillers”.In: Lakshminarayana A., Idapalapati S., Vasudevan M. (Eds) Advances in Material and Materials and Metallurgy. Lecture notes in Mechanical Engineering springer, Singapore. Sep- 02., 2018 Doi.org/10.1007/978-981-13-1780-4_37 .,ISBN 978-981-13-1779-8
SPONSORED RESEARCH:
CERTIFICATION COURSES:
Got certified with Elite from NPTEL online certification course (8 Weeks) on “introduction to vibrations conducted by IIT Madras in the year 2018.
Got certified from NPTEL online certification course (4 Weeks) on “outcome based
pedagogic principles of effective teaching conducted by IIT Madras in the year 2018 Got certified with from NPTEL online certification course (8 Weeks) on “introduction to
vibrations conducted by IIT Madras in the year 2017.
WORKSHOPS/FDPS ATTENDED:
Attended Three Day FDP on” outcome based pedagogic principles of effective teaching”
sponsored by Ministry of HRD., Govt of India 2018.
Attended one week FDP on “Noise and Vibration Control of Structures: Engineering
Applications “during 26/11/8 to 1/12/18 ,2018sponsored by AICTE Delhi at JNTU Kakinada.
Attended one week FDP on “Organization Behavior “ on ICT MODE Organized by NITTTR
Ministry of HRD., Govt of India “du ring 12/11/18 to16/11/18,2018 at LBRCE Mylavaram
Attended 3 Day FDP on Fundamentals of Structural Analysis during 7/11/16-9/11/16, 2013
at LBRCE Mylavaram.
Attended 3 Day FDP on” Fundamentals of Engineering Mechanics” during 9/11/15-
11/11/15, 2015 at LBRCE Mylavaram.
Attended One week FDP on Recent Trends in manufacturing process during 17/3/14-
23/3/14, 2014 at LBRCE Mylavaram.
Attended One week FDP on Recent Advances in Mechanical Engineering “during 26/12/14-
30/12/14, 2014 at LBRCE Mylavaram.
Attended 3 day FDP on “Engineering drawing using Auto CAD “during 13/11/14-15/11/14,
2014 at LBRCE Mylavaram.
Attended One week FDP on “finite element analysis and practices on through ANSYS
during 04/02/13 -10/02/13, 2013 at LBRCE Mylavaram.
WORKSHOPS / FDPS / STTPS / TRAINING PROGRAMS ORGANIZED:
One Day Work Shop on” Empowering Teaching Excellence through E-Learning
Platforms” Organized during 8/7/2017 at JNTU KAKINADA
One Day Work Shop on “Advances in Materials and Manufacturing
Technologies Organized during 23/4/16, at SRKR Engineering college 2016.
Three day workshop on” Finite element analysis and CFD using ANSYS”
during 8/12/16-10/12/16. at LBRCE Mylavaram.
PROJECTS SUPERVISED: B.Tech - 15., M.Tech. - 01 MEMBERSHIPS:
Life Member of International Association of Engineers (IAENG) – M.NO:214270 Life Member of The Institution of Engineers(INDIA) (IE) – AM 162703-4
PROGRAM COMMITTEE:
AWARDS/ ACHIEVEMENTS:
ADVISORY AND ADMINISTRATIVE ROLES:
Recommended