View
2
Download
0
Category
Preview:
Citation preview
PROF. PAUL C. KING RA
New York City College of Technology
Fall 2011
LC.1200-1290 Tutorials.02 Bldg.General- Prof.King V.1.0.docx
Copyright © 2011 Paul C. King
Bldg.Floor Slabs ADDING FIRST
Overview: We will be adding
and the Lab Building
locker rooms for the Gym and Mechanical Rooms for the
North Elevation: Make the North Elevation
Level 1 with the left end of the
not the upper levels you will need
Unlock the level.
(Note: You may need to hide the display of the property lines)
Footing Elevation: Change the elevation of the
Add New Level: Create a New Level by Offsetting
Home > Levels > Pick Lines
Name this level
Select "Yes" when
Adjust Graphics: Shift the Basement Level Bubble so it does not overlap with "
Learning Community
New York City College of Technology ARCH_1290 & ARCH_1200
Prof.King V.1.0.docx
Building Development | Re
IRST FLOOR AND BASEMENT FLOOR SLABS
adding foundation slabs and structural floor slabs to
Lab Building. We will be adding a basement level to
locker rooms for the Gym and Mechanical Rooms for the entire
North Elevation the Current View. Select and align the left end of
with the left end of the Top of Footing Level. To move only level 1 and
not the upper levels you will need to Toggle 3D to 2D and you will need to
Unlock the level. When done also turn on the Bubble Display
(Note: You may need to hide the display of the property lines)
Change the elevation of the Top of Footing Level from -5' to
Create a New Level by Offsetting Top of Footing up 8 inches.
Home > Levels > Pick Lines Offset = 8" and Yes to "Make Plan View
Name this level Basement. The elevation of this level should be
" when prompted "Would you like to rename corresponding views?"
the Basement Level Bubble so it does not overlap with "
Learning Community
ARCH_1290 & ARCH_1200
Page 23 of 28
Building Development | Revit
floor slabs to the Gym, Atrium
to accommodate
entire complex.
lign the left end of
To move only level 1 and
and you will need to
Bubble Display.
(Note: You may need to hide the display of the property lines)
-12' - 8"
Make Plan View"
. The elevation of this level should be at -12-8"'
Would you like to rename corresponding views?"
the Basement Level Bubble so it does not overlap with "Top of Footing"
PROF. PAUL C. KING RA
New York City College of Technology
Fall 2011
LC.1200-1290 Tutorials.02 Bldg.General- Prof.King V.1.0.docx
Copyright © 2011 Paul C. King
Basement Level: Make the Basement Level
the basement leve
Duplicate Slab: Structure > Slab
We need to create our own 8" foundation slab
After renaming the new type,
Draw Slabs: Make certain the level is set to
Learning Community
New York City College of Technology ARCH_1290 & ARCH_1200
Prof.King V.1.0.docx
Building Development | Re
Basement Level the Current View and then Select
the basement level and change "View depth" to unlimited.
lab > Foundation Slab > 6" Foundation Slab
e need to create our own 8" foundation slab by duplicating the 6"
After renaming the new type, edit the structure and change the
ake certain the level is set to "Basement".
Learning Community
ARCH_1290 & ARCH_1200
Page 24 of 28
Building Development | Revit
"View Range" for
by duplicating the 6" slab
and change the thickness to 8"
PROF. PAUL C. KING RA
New York City College of Technology
Fall 2011
LC.1200-1290 Tutorials.02 Bldg.General- Prof.King V.1.0.docx
Copyright © 2011 Paul C. King
Create Slab: Structure > Slab
Draw Slabs: Draw 3 rectangles
Rectangles: For the Gym/Auditorium,
the inner corne
Learning Community
New York City College of Technology ARCH_1290 & ARCH_1200
Prof.King V.1.0.docx
Building Development | Re
lab > Foundation Slab > 8" Foundation Slab
Draw 3 rectangles to create the slabs for the Gym, Atrium and Lab Building
For the Gym/Auditorium, Atrium and Lab Building, draw rectangles snapping to
corners of the foundation walls.
Learning Community
ARCH_1290 & ARCH_1200
Page 25 of 28
Building Development | Revit
o create the slabs for the Gym, Atrium and Lab Building.
raw rectangles snapping to
PROF. PAUL C. KING RA
New York City College of Technology
Fall 2011
LC.1200-1290 Tutorials.02 Bldg.General- Prof.King V.1.0.docx
Copyright © 2011 Paul C. King
Level 1: Make Level 1
Create Floor: Structure > Floor > Structural Floor > Floor Generic
Rectangles: For the Gym/Auditorium,
rectangles snapping to the
Attach: Select Yes when prompted to attach walls to the floors bottom
Learning Community
New York City College of Technology ARCH_1290 & ARCH_1200
Prof.King V.1.0.docx
Building Development | Re
the Current View
Floor > Structural Floor > Floor Generic - 12"
For the Gym/Auditorium, the Atrium and the Lab Building we will draw
rectangles snapping to the outer corners of the foundation wall
Select Yes when prompted to attach walls to the floors bottom
Learning Community
ARCH_1290 & ARCH_1200
Page 26 of 28
Building Development | Revit
we will draw
oundation wall
Select Yes when prompted to attach walls to the floors bottom
PROF. PAUL C. KING RA
New York City College of Technology
Fall 2011
LC.1200-1290 Tutorials.02 Bldg.General- Prof.King V.1.0.docx
Copyright © 2011 Paul C. King
West Elevation: To copy the lab slabs to the upper levels,
Select Floor: Select the level 1
Copy Floor: Copy the level 1
Grid Cleanup: On the North
Learning Community
New York City College of Technology ARCH_1290 & ARCH_1200
Prof.King V.1.0.docx
Building Development | Re
To copy the lab slabs to the upper levels, set West Elevation
level 1 floor slab for the lab building
level 1 floor up to levels 2, 3, 4, 5 & 6.
and West elevations extend the grid lines below the basement
Learning Community
ARCH_1290 & ARCH_1200
Page 27 of 28
Building Development | Revit
the Current View
below the basement
PROF. PAUL C. KING RA
New York City College of Technology
Fall 2011
LC.1200-1290 Tutorials.02 Bldg.General- Prof.King V.1.0.docx
Copyright © 2011 Paul C. King
Review your work: Use a section view to check the
Create Section: View > Section
Drag the Section across the foundation wall and slabs
Section View: Right Click on the
Section View: View of cross
Showing Top of Footing,
Section Detail: View of section through Gym / Auditorium
Learning Community
New York City College of Technology ARCH_1290 & ARCH_1200
Prof.King V.1.0.docx
Building Development | Re
a section view to check the construction of the foundation, footings
View > Section
Drag the Section across the foundation wall and slabs
on the Section and then select "Go to View"
cross section through Gym / Auditorium
Showing Top of Footing, Basement and Level 1
View of section through Gym / Auditorium foundation wall and footing
Learning Community
ARCH_1290 & ARCH_1200
Page 28 of 28
Building Development | Revit
of the foundation, footings & slabs.
foundation wall and footing
Recommended