View
230
Download
1
Category
Preview:
Citation preview
iPhone setting
1. Make sure BTH-300 is OFF, and press power switch and hold for 6 seconds
2. BTH-300 is under pairing mode when you see
3. Start Bluetooth function on your smart phone.
4. Find the device name “BTH-
5. Start Zello, go to options, tap
Wireless button service, and
6. Pairing process is completed
BTH-300-Zello
is OFF, and press power switch and hold for 6 seconds
is under pairing mode when you see RED-BLUE-RED-BLUE LED flashing
function on your smart phone.
300-xx” under Bluetooth column and connect it.
Start Zello, go to options, tap Push To Talk buttons, tap Wireless Zello button, start
and then find the device “PTT-Z” or “PTT
completed.
1
is OFF, and press power switch and hold for 6 seconds
BLUE LED flashing.
under Bluetooth column and connect it.
, tap Wireless Zello button, start
PTT-AZ” and connect it.
Android setting
1. Make sure BTH-300-AZ is OFF, and press power switch and hold for 6 seconds
2. BTH-300-AZ is under pairing mode when you see the LED flashing RED and
alternatively.
3. Start Bluetooth function on your smart phone.
4. Find device name “BTH-300-
AZ is OFF, and press power switch and hold for 6 seconds
AZ is under pairing mode when you see the LED flashing RED and
Start Bluetooth function on your smart phone.
-xx” and tap it
2
AZ is OFF, and press power switch and hold for 6 seconds
AZ is under pairing mode when you see the LED flashing RED and BLUE
3
5. After connection is established, execute Zello and tap the menu on the top right:
4
6.Then choose “Options”
5
7.press “Push-to-Talk button”
6
8.press “+ADD Button”
7
9.Press your PTT-Z button
8
10. You will see “PTT-Z” or “PTT-AZ”, it’s ready to go.
9
11. Good to go
Recommended