View
136
Download
2
Category
Preview:
Citation preview
MODEL COMMANDER DEST. CHASSIS NO.
CHASSIS
TRINITRON® COLOR TV
SERVICE MANUAL BX1MODEL COMMANDER DEST. CHASSIS NO.
KV-21CL5K RM-W100 OIRT SCC-U92G-A
– 2 –
KV-21CL5KRM-W100
TABLE OF CONTENTS
CAUTION & WARNING ....................................................... 3 WARNING (UK only) .......................................................... 3SELF DIAGNOSTIC FUNCTION ........................................ 4
1. DISASSEMBLY1-1. Rear Cover Removal ................................................... 71-2. Speaker Block Assy Removal ..................................... 71-3. Chassis Assy Removal ................................................ 71-4. Service Position .......................................................... 71-5. Terminal Bracket Removal ......................................... 71-6. A Board Removal ....................................................... 71-7. Picture Tube Removal ................................................. 8
2. SET-UP ADJUSTMENTS2-1. Beam Landing ............................................................. 92-2. Convergence .............................................................. 102-3. Focus Adjustment ..................................................... 122-4. G2 (SCREEN) Adjustment ....................................... 122-5. White Balance Adjustment ....................................... 12
3. CIRCUIT ADJUSTMENTS3-1. Adjustment With Commander .................................. 133-2. Adjustment Item Table ............................................. 143-3. T-Mode ...................................................................... 243-4. TT-Mode ................................................................... 243-5. T-Cyan Mode ............................................................ 243-6. Sub Brightness Adjustment ...................................... 253-7. Sub Contrast Adjustment .......................................... 253-8. Sub Colour Adjustment ............................................ 253-9. Tuner AGC Adjustment ............................................ 253-10. Deflection Adjustment .............................................. 26
Section Title Page Section Title Page
4. DIAGRAMS4-1. Block Diagram .......................................................... 274-2. Circuit Boards Location ........................................... 284-3. Schematic Diagram ................................................... 28
4-3-1. A Board – Processor (Block A) ..................... 294-3-2. A Board – Audio (Block B) ........................... 314-3-3. A Board – Power Supply (Block C) .............. 334-3-4. A Board – Deflection (Block D) .................... 354-3-5. A Board – Tuner (Block E) ............................ 374-3-6. A Board – Jack, Scart Terminal (Block F) .... 394-3-7. C Board .......................................................... 41
4-4. Voltage Measurement And Waveform ...................... 424-5. Printed Wiring Boards And Parts Location .............. 454-6. Semiconductors ......................................................... 48
5. EXPLODED VIEWS5-1. Chassis ...................................................................... 50
6. ELECTRICAL PARTS LIST......................................... 51
INSTRUCTION MANUAL
CAUTION
SHORT CIRCUIT THE ANODE OF THE PICTURE TUBE AND THEANODE CAP TO THE METAL CHASSIS, CRT SHIELD, OR THECARBON PAINTED ON THE CRT, AFTER REMOVAL OF THEANODE CAP.
WARNING !!
AN ISOLATION TRANSFORMER SHOULD BE USED DURINGANY SERVICE WORK TO AVOID POSSIBLE SHOCK HAZARDDUE TO LIVE CHASSIS, THE CHASSIS OF THIS RECEIVER ISDIRECTLY CONNECTED TO THE POWER LINE.
SAFETY-RELATED COMPONENT WARNING !!
COMPONENTS IDENTIFIED BY SHADING AND MARKED ! ONTHE SCHEMATIC DIAGRAMS, EXPLODED VIEWS AND IN THEPARTS LIST ARE CRITICAL FOR SAFE OPERATION. REPLACETHESE COMPONENTS WITH SONY PARTS WHOSE PARTNUMBERS APPEAR AS SHOWN IN THIS MANUAL OR INSUPPLEMENTS PUBLISHED BY SONY.
ATTENTION
APRES AVOIR DECONNECTE LE CAP DE’LANODE,COURT-CIRCUITER L’ANODE DU TUBE CATHODIQUE ETCELUI DE L’ANODE DU CAP AU CHASSIS METALLIQUE DEL’APPAREIL, OU AU COUCHE DE CARBONE PEINTE SUR LETUBE CATHODIQUE OU AU BLINDAGE DU TUBECATHODIQUE.
ATTENTION !!
AFIN D’EVITER TOUT RISQUE D’ELECTROCUTIONPROVENANT D’UN CHÁSSIS SOUS TENTION, UNTRANSFORMATEUR D’ISOLEMENT DOIT ETRE UTILISÈ LORSDE TOUT DÈPANNAGE LE CHÁSSIS DE CE RÈCEPTEUR ESTDIRECTMENT RACCORDÈ Á L’ALIMENTATION SECTEUR.
ATTENTION AUX COMPOSANTS RELATIFS ÁLA SECURITÈ!!
LES COMPOSANTS IDENTIFIÈS PAR UNE TRAME ET PAR UNEMARQUE ! SUR LES SCHÈMAS DE PRINCIPE, LES VUESEXPLOSÈES ET LES LISTES DE PIECES SONT D’UNEIMPOR-TANCE CRITIQUE POUR LA SÈCURITÈ DUFONCTIONNEMENT,NE LES REMPLACER QUE PAR DES COMPSANTS SONY DONTLE NUMÈRO DE PIÈCE EST INDIQUÈ DANS LE PRÈSENTMANUEL OU DANS DES SUPPLÈMENTS PUBLIÈS PAR SONY.
– 3 –
KV-21CL5KRM-W100
CAUTION
Lead Free Soldered Boards
The circuit boards listed below (Table 1) may have been processed using Lead Free Solder. The boards areidentified by the LF logo . e.g A,C board (see example).
The servicing of these boards requires special precautions to be taken as outlined below:1. It is strongly recommended to use Sony Approved Lead Free Solder material in order to guarantee optimal
quality of new solder joints.2. Due to higher melting point of Lead Free Solder, the soldering iron tip temperature needs to be set to chip
(350 degree centigrade) and lead component (380 degree centigrade) for not more than 4 seconds. This requiressoldering equipment capable of accurate temperature control coupled with a good heat recovery characteristics.
WARNING(FOR EUROPE MODEL WITH “U” (UK) ONLY)
The flexible mains lead is supplied to connected a B.S. 1363 fused plug having a fuse of 5 AMP rating. Should thefuse need to be replaced, use a 5 AMP FUSE approved by ASTA to BS 1362, i.e one that carries theASAT mark.
IF THE PLUG SUPPLIED WITH THIS APPLIANCE IS NOT SUITABLE FOR THE OUTLET SOCKETS IN YOURHOME, IT SHOULD BE CUT OFF AND APPROPRIATE PLUG FITTED. THE PLUG SEVERED FROM THE MAINSLEAD MUST BE DESTROYED AS A PLUG WITH BARED WIRES IS DANGEROUS IF ENGAGED IN A LIVESOCKET.
When an alternative type of plug is used, it should be fitted with a 5 AMP FUSE, otherwise the circuit should beprotected by a 5 AMP FUSE at the distribution board.
Board Function
A ONE CHIP PROCESSOR, DEFLECTION,POWER SUPPLY, AUDIO, TUNER, IF,JACK,SCART TERMINAL
C RGB AMP
example 1 (A Board) example 2 (C Board)
How to replace the fuse?Open the fuse compartment with a screw driver blade and replace the fuse.
(Table 1)
– 4 –
KV-21CL5KRM-W100
The units in this manual contain a self diagnostic function. If an error occurs, the STANDBY (1) indicator will automaticallybegin to flash. A description of the self-diagnosis function is explained in the instruction manual. The number of times theSTANDBY (1) indicator flashes translates to a probable source of the problem. If an error symptom cannot be reproduced,the remote commander can be used to review the failure occurrence data stored in memory to reveal past problems andhow often these problems occur.
1. DIAGNOSTIC TEST INDICATORS
When an errors occurs, the STANDBY (1) indicator will flash a set number of times to indicate the possible cause of theproblem. If there is more than one error, the indicator will identify the first of the problem areas.
Result for all of the following diagnosis items are displayed on screen. No error has occured if the screen displays a “0”.
* If a +B overcurrent is detected, stoppage of the vertical deflection is detected simultaneously. The symptom that isdiagnosed first by the mirco controller is displayed on the screen.
** Refer to Screen (G2) Adjustment in this manual.
SELF DIAGNOSTIC FUNCTION
DiagnosisItem
Description
Power doesnot turn on
+B overcurrent(OCP)*
V-Protect
IK (AKB)
HV Protect
No. of timerSTANDBY (1)
indicator flashes
Does not light
2 times
4 times
5 times
8 times
Self-Diagnosticdisplay/
Diagnosis result
–
2:0or
2:1 ~ 255
4:0or
4:1 ~ 255
5:0or
5:1 ~ 255
8:0or
8:1 ~ 255
Probable CauseLocation
• Power cord is not pluggedin.
• Fuse is burned out (F600)A board.
• H OUT (Q805) is shorted.(A board)
• IC751 is shorted. (C board)
• +13V is not supplied.(A board)
• IC804 is faulty. (A board)
• Video OUT (IC1545) isfaulty. (A board)
• IC001 is faulty. (A board)• Screen (G2) is improperly
adjusted.**
• IC604 faulty.• IC602 faulty.
DetectedSymptoms
• Power does not come on.• No power is supplied on
TV.• AC Power supply is faulty.
• Power does not come on.• Load on power line is
shorted.
• Has entered standby stateafter horizontal raster.
• Vertical deflection pulse isstopped.
• Power line is shorted orpower supply is shorted.
• No raster is generated.• CRT Cathode current
detection reference pulseoutput is small.
• No power supply to CRTANODE.
• No RASTER is generated.
– 5 –
KV-21CL5KRM-W100
2. DISPLAY OF STANDBY (1) INDICATOR
FLASH COUNT
3. STOPPING THE STANDBY (1) INDICATOR FLASHTurn off the power switch on the TV main unit or unplug the power cord from the outlet to stop the STANDBY (1)indicator from flashing.
4. SELF-DIAGNOSTIC SCREEN DISPLAYFor errors with symptoms such as "power sometimes shuts off" or "screen sometimes goes off" that cannot be confirmed,it is possible to bring up past occurrences of failure on the screen for confirmation.
[To Bring Up Screen Test]In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:
Display / Channel 5 / Volume / Power / TV
˘
Note that this differs from entering the service mode (volume [+]).
The following screen will be displayed indicating the error count.
Diagnostic Item Flash Count*
+B overcurrent 2 timesV-Protect 4 timesIK (AKB) 5 timesHV Protect 8 times
* One flash count is not used for self-diagnosis.
Lamp OFF 3 sec Lamp ON 300ms
Lamp OFF 300ms
STANDBY u indicator
2 : 03 : N/A4 : 05 : 18 : 0
101 : N/A
ERROR MENU
Numeral "0" means that no fault was detected.Numeral "1" means the number of a fault occurrence (1 ~ 255).
– 6 –
KV-21CL5KRM-W100
5. HANDLING OF SELF-DIAGNOSTIC SCREEN DISPLAYSince the diagnostic results displayed on the screen are not automatically cleared, always check the self-diagnostic screenduring repairs. When you have completed the repairs, clear the result display to “0”.
Unless the result display is cleared to “0”, the self-diagnosis function will not be able to detect subsequent faults aftercompletion of the repairs.
[Clearing the result display]To clear the result display to “0”, press buttons on the remote commander subsequent as shown below when theself-diagnostic screen is being displayed.
8 / -
[Quitting Self-diagnostic screen]To quit the entire self-diagnostic screen, turn off the power switch on the remote commander or the main unit.
6. SELF-DIANOSTIC CIRCUIT
[+B overcurrent $OCP%] Occurs when an overcurrent on the +B(135V) line is detected by pin 32 of IC001 (A board).If the voltage of pin 32 of IC001 (A board) is more than 4V, the unit will automatically go tostandby.
[V-PROTECT] Occurs when an absence of the vertical deflection pulse is detected by pin 13 of IC001(A board).
[IK $AKB%] If the RGB levels* do not balance within 15 sec after the power is turned on, this error will bedetected by IC001 (A board). TV will stay on, but there will be 5 times LED blinking.
[HV PROTECT] Occurs when IC001 internal HV protect detects an abnormal H-Pulse (frequency) due toimproper power supply to IC001. TV cuts off high voltage power of anode CRT. No picture willbe detected. eg: IC602, IC604 go faulty.
* (Refers to the RGB levels of the AKB detection Ref pulse that detects IK.)
A BOARDIC001
Y/CHROMA JUNGLE
A BOARDIC804V.OUT
A BOARDIC001
SYSTEM
A BOARDIC003
MEMORY
FROMC BOARD
IC751 PIN 5IK
EHTORED LED
DISPLAY
SDA1
V.GUARDSDA5F.B-PLS 3 1384
32122A BOARD
FROMQ804
COLLECTOR
99
– 7 –
KV-21CL5KRM-W100
3 Terminal bracket
2 One screw (PT screws)
Bracket FBT
1 One screw (+BVTP 3x16)
SECTION 1DISASSEMBLY
1-1. REAR COVER REMOVAL 1-2. SPEAKER BLOCK ASSY REMOVAL
1-3. CHASSIS ASSY REMOVAL 1-4. SERVICE POSITION
1-6. A BOARD REMOVAL1-5. TERMINAL BRACKET REMOVAL
1 Eight Screws(PT screws)
2 Rear cover
Two Screws(4 x 16)W(+)P TAPPING
A Board
– 8 –
KV-21CL5KRM-W100
• REMOVAL OF ANODE-CAP
Note:• After removing the anode, short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT
shield or carbon paint on the CRT.
• REMOVING PROCEDURES
1 Turn up one side of the rubber cap in the directionindicated by the arrow a.
2 Using a thumb pull up the rubber cap firmly in the di-rection indicated by the arrow b.
3 When one side of the rubber cap is separated from
the anode button, the anode-cap can be removed byturning up the rubber cap and pulling it up in thedirection of the arrow c.
• HOW TO HANDLE AN ANODE-CAP
1 Do not damage the surface of anode-caps withsharp shaped objects.
2 Do not press the rubber too hard so as not todamage the inside of anode-cap.A metal fitting called the shatter-hook terminal isbuilt into the rubber.
3 Do not turn the foot of rubber over too hard.The shatter-hook terminal will stick out or damagethe rubber.
anode button
1-7. PICTURE TUBE REMOVAL
Note:• Please make sure the TV set is not in standing position before removing necessary CRT support located on bottom
right and left.1) Place the TV set with the CRT face down on a cushion jig.2) Removal the rear cover.3) Unplug all interconnecting leads from the Deflection Yoke, Degaussing Coils and CRT grounding strap.
a
a
b
b
c
4 Anode Cap Removal
5 C Board Removal
7 Chassis Assy Removal8 Support, CRT(21)
Removal (x2)
qa Spring Tension Removal (x1)
9 Holder, DGC Removal (x2)
qs Earth Coating Assy Removal
0 Degaussing Coil Removal (x2)
qd unscrew — PT Screw (x4)
6 Loosen the Deflection Yoke fixing screw and remove
– 9 –
KV-21CL5KRM-W100
• The following adjustments should be made when acomplete realignment is required or a new picture tube isinstalled.
Set the controls as follows unless otherwise noted:
VIDEO MODE .................................................. STANDARD
PICTURE CONTROL .......................................... NORMAL
BRIGHTNESS CONTROL .................................... NORMAL
Perform the adjustments in the following order :1. Beam Landing2. Convergence3. Focus4. Screen (G2)5. White Balance
Note : Test Equipment Required.1. Pattern Generator2. Degausser3. DC Power Supply4. Digital Multimeter5. Oscilloscope
SECTION 2SET-UP ADJUSTMENTS
Preparation:In order to reduce the influence of geomagnetism on theset's picture tube, face it east or west. Switch on the set'spower and degauss with the degausser.
2-1. BEAM LANDING
Picture Mode : LIVE
1. Input a white signal with the pattern generator.Set the contrast and brightness to normal.
2. Set the pattern generator raster signal to a green raster.3. Move the deflection yoke to the rear and adjust with the
purity control so that the green is at the centre and theblue and red take up equally sized areas on each sideof the screen. (see figure 2-1 and figure 2-1-1)
4. Move the deflection yoke forward and adjust so that theentire screen is green. (see figure 2-1-2)
5. Switch the raster signal to blue, then red and verify thecondition.
6. When the position of deflection yoke have beendecided, fasten the deflection yoke with the screws andDY spacers.
Figure 2-1 Figure 2-1-1
Purity control
Figure 2-1-2
RedBlue
Green
7. If the beam does not land correctly in all the corners,use a magnet to correct if. (see figure 2-1-3)
Caution:High voltages are present on the Deflection yoketerminals. Take care when handling the deflection yokewhilst carrying out adjustments.
Figure 2-1-3
Purity controlcorrects this area.
Disk magnets or rotatabledisk magnets correct theseareas (a-d).
Deflection yoke positioningcorrects these areas.
ab
b
c
c
d
d
a
– 10 –
KV-21CL5KRM-W100
2-2. CONVERGENCE
Preparation:• Before starting this adjustment, adjust the focus,
horizontal size and vertical size.• Receive dot/hatch signal.• Picture Mode : MOVIE
(A) Horizontal and Vertical Static Convergence
1. (Moving vertically), adjust the V.STAT magnet so thatthe red, green and blue dots are on top of each other atther centre of the screen.
2. (Moving horizontally), adjust the H.STAT VR control sothat the red, green and blue dots are on top of eachother at the centre of the screen.
3. BMC (Hexapole)MagnetIf the red, green and blue dots are not balanced oraligned then use the BMC magnet to adjust in themanner described below.
Centre dot
R G B
R
G
B
H. STAT VRV. STATMagnet
RV750
C Board
B G R R G B R G B
R BR GG GB
R B
4. If the H.STAT variable resistor cannot bring the red,green and blue dots together at the centre of thescreen, adjust the horizontal convergence with the H.STAT variable resistor and the V.STAT magnet in themanner given below.(In this case, the H.STAT variable resistor and theV.STAT magnet influence each other, so be sure toperform adjustments while tracking.)
Operation of V.STAT magnet.If the V.STAT is moved in the "A" and "B" arrows, the red,green and blue dots moves as shown below.
Moved RV750 H.STAT the red, green and blue dots moveas shown below.
BMC (Hexapole)
V.STAT
DY pocket
Purity
V.STAT
BMCPurity
B
G
R
B
G
R
A B
BGR
A
RGB
B
– 11 –
KV-21CL5KRM-W100
5. Layout of each control.
6. Geometry Adjustment.
Preparation:Before starting this adjustment, adjust the horizontal andvertical static convergence.
a) Remove the deflection yoke spacer.b) Tilt the deflection yoke as indicated in the figure below
and optimise the geometry.Tilting the DY up and down will balance the upper andlower pin adjustment.Tilting the DY left and right will balance the H-Trapadjustment.
c) Re-install the deflection yoke spacer.
7. H-TILT Adjustment
Purity
BMC (Hexapole)
V.STAT
,
,
,
,
, Tilt Direction
Deflection Yoke
TLH pieces
H-TILT correction can be performed by adding a TLHcorrection assembly to the Deflection Yoke.
8. YCH Adjustment
9. TLV Adjustment
10. Screen Corner Convergence.If you are unable to adjust the corner convergenceproperly, this can be corrected with the use of PieceA(90) Conv. Correct.
Deflection Yoke
YCH VR
Deflection Yoke
TLV VR
b a
c d
a-d : screen-corner misconvergence
a
d c
b
Install the Piece A(90) Conv. Correct assembly for the area that needs correcting.
Convergence adjustment with Piece A(90) Conv. Correct
Piece A(90) Conv. Correct4-094-690-01
– 12 –
KV-21CL5KRM-W100
2-3. FOCUS ADJUSTMENT
1. Receive digital monoscope pattern.2. Set Picture Mode to PERSONAL.3. Adjust focus VR to obtain the best focus at the centre of
the screen.4. Change the receiving signal to white pattern and blue
back.5. Confirm magenta ring is not noticeable. In case
magenta is very obvious, adjust the focus VR to takebalance of magenta ring and focus.
2-4. G2(SCREEN) ADJUSTMENT
1. Input a dot signal from the pattern generator.2. Set the Picture, Brightness and Colour to minimum.3. Apply 167V DC from an external power supply to the
R,G and B cathodes of the CRT.4. Adjust brightness to obtain cathode value to value
below.5. Whilst watching the picture, adjust the G2 control
[SCREEN] located on the Flyback Transformer to thepoint just before the flyback return lines disappear.
FOCUS
SCREEN
FLYBACK TRANSFORMER (T801)
Cathode setting voltage:167 V ± 2 (VDC) — 21"
2-5. WHITE BALANCE ADJUSTMENT
1. Enter into Service Menu.2. Input white pattern signal.3. Set picture to PERSONAL mode.4. Select WHBL "RDRV" and fix the value to 25 hex.5. Adjust WHBL "GDRV" and "BDRV" and adjust the data
for best white balance in highlight condition.6. Adjust WHBL "BKOR" and "BKOG" and adjust the data
for best white balance cut-off condition.7. Set the offset settings for LIVE and GAME mode as
stated in the table 1 below:-
Live T Personal T GameAdjusted value +2 BKOR (adjusted) Adjusted valueAdjusted value -3 BKOG (adjusted) Adjusted value
25hex RDRV (25hex) 25hexAdjusted value +2 GDRV (adjusted) Adjusted value -2Adjusted value +4 BDRV (adjusted) Adjusted value -6
OFFSET TABLE (Table 1)
– 13 –
KV-21CL5KRM-W100
SECTION 3CIRCUIT ADJUSTMENTS
3-1. ADJUSTMENT WITH COMMANDER
Service adjustment to this model can be performed using the supplied remote commander RM-W100.
a. ENTERING SERVICE MODEWith the unit on standby, press the following sequence of buttons on the remote commander.
'TT – –'will appear in the upper right corner of the screen.Other status information will also be displayed.
b. Press 'MENU' on the remote commander to obtain service menu on the screen.
GEOMWHBLSADJYCSYNCPICTSWVIF
c. The screen only displays 8 items at one time. To move to the corresponding item use the up down buttons onthe remote commander.
d. Press the right / left button or ENTER button on the remote commander to enter into the required item.
e. The screen only display 12 items at one time. To move to the corresponding item use the up down buttons on
the remote commander.f. Press right to increase or left to decrease the data.g. Press the 'MENU' button on the remote commander to quit from Service Menu. Screen will still display 'TT – –'. To exit
from 'TT – –' menu, press 0 twice, 'TEST', 'TV' or switch the TV into standby mode.
Note:
• After carrying out the service adjustments, to prevent the customer accessing the 'Service Menu' switch the TV setOFF and then ON.
52(0,63)HPOS
ItemName Range Data
40(0,63)HPAR
/ Display / Channel 5 / Volume [+] / Power / TV
– 14 –
KV-21C
L5KR
M-W
100
JVT ytilanoitcnuF laitinI egnaR noitcnuF etoN&elbaT emaNeciveD nommoC 05 06 05w 06w
yrogetaC oN emaN ceD ceD
MOEG 000 SOPH 130 360 )SH(tfihSlatnoziroH )BGRNPJ+(06w/05w/06/05 rossecorP-VT 13 13 13 13
100 RAPH 130 360 margolellaraPlatnoziroH 06w/05w/06/05 13 13 13 13
200 WOBH 130 360 woBlatnoziroH 06w/05w/06/05 13 13 13 13
300 NILV 130 360 ytiraeniLlacitreV 06w/05w/06/05 13 13 13 13
400 RCSV 130 360 llorcSlacitreV 06w/05w/06/05 13 13 13 13
500 ZISH 130 360 )WE(htdiWWE )BGRNPJ+(06w/05w/06/05 13 13 13 13
600 WPWE 130 360 )WP(htdiW/alobaraPWE 06w/05w/06/05 13 13 13 13
700 POCU 710 360 alobaraPrenroCreppUWE 06w/05w/06/05 71 71 71 71
800 POCL 710 360 alobaraPrenroCrewoLWE 06w/05w/06/05 71 71 71 71
900 ZTWE 130 360 muizeparTWE 06w/05w/06/05 13 13 13 13
010 PLSV 130 360 )SV(epolSlacitreV 06w/05w/06/05 13 13 13 13
110 ZISV 510 360 edutilpmAlacitreV 06w/05w/06/05 51 51 51 51
210 ROCS 410 360 )CS(noitcerroC-S 06w/05w/06/05 41 41 41 41
310 SOPV 130 360 )HSV(tfihSlacitreV 06w/05w/06/05 13 13 13 13
410 LBH 000 100 edoMgniknalBBGR 06w/05w/06/05 10 10 10 10
510 FBW 700 510 )FBW(gniknalBediWfognimiT 06w/05w/06/05 90 90 90 90
610 RBW 700 510 )RBW(gniknalBediWfognimiT 06w/05w/06/05 01 01 01 01
710 LBS 000 100 gniknalBecivreS enon 00
810 YPOC 000 100 aeraMVNzH06/05llaotatadOEGehtypoC enon 00
3-2. ADJUSTMENT ITEM TABLE
• shaded items are adjustable data.• no data.
– 15 –
KV-21C
L5KR
M-W
100
JVT ytilanoitcnuF laitinI egnaR noitcnuF etoN&elbaT emaNeciveD nommoC eviL)rehtoLOOC(
EMAG)rehtoMRAW(
/EIVOMLANOSREPLARTUEN(
)rehto
EVIL)BGRLOOC(
EMAG)BGRMRAW(
/EIVOMLANOSREPLARTUEN(
)BGR
rehtO BGR VUY edomciP0
)EVIL(
edomciP1
)EIVOM(
edomciP2
)EMAG(
edomciP3
)LANOSREP(yrogetaC oN emaN ceD ceD
LBHW 000 ROKB 130 360 RtesffOleveLkcalB )srehtO/BGR/VU(*)lamroN/WOL/HGIH(pmetloc rossecorP-VT 13 13 13 13 13 13
100 GOKB 130 360 GtesffOleveLkcalB )srehtO/BGR/VU(*)lamroN/WOL/HGIH(pmetloc 13 13 13 13 13 13
200 VRDR 730 360 RtnioPetihW )srehtO/BGR/VU(*)lamroN/WOL/HGIH(pmetloc 73 73 73 73 73 73
300 VRDG 730 360 GtnioPetihW )srehtO/BGR/VU(*)lamroN/WOL/HGIH(pmetloc 73 73 73 73 73 73
400 VRDB 730 360 BtnioPetihW )srehtO/BGR/VU(*)lamroN/WOL/HGIH(pmetloc 73 73 73 73 73 73
500 GPL 000 100 teserPniaGBGR enon 00
600 RGP 130 721 )RGP(RniaGteserP enon 54
700 GGP 130 721 )GGP(GniaGteserP enon 54
800 BGP 130 721 )BGP(BniaGteserP enon 54
900 FONG 000 510 tesffOniaGteserP enon poolCCC 80
010 TRBS 130 360 ssenthgirB-buS VUY/BGR/srehtO 83 43 00
110 ORBS 000 300 )ciPtnegilletnI(tesffOssenthgirB-buS enon 00
210 LGE 000 100 metsySCCCpooLniaGelbanE enon 00
310 LGS 000 300 metsySCCCnitnerruChgiHfonoitceleS enon 00
410 BKA 000 100 noitazilibatStnerruCkcalB enon 00
510 SBC 000 100 gnitimiLtnerruCmaeBfoecneuqeSlortnoC enon 00
610 BBGR 000 300 gniknalBBGR enon 00
710 GBLB 000 100 tuptuOneerG&eulBfogniknalB enon 00
810 BFO 000 100 eulBtesffOleveLkcalB enon 00
910 RBSN 000 510 tesffOssenthgirBdradnatS-noN enon 00
020 PBW 000 300 )woL:3,2,lamroN:1,hgiH:0(gnittespmeTroloC edoMerutciP 00 10 20 10
120 VUO 000 300 slangistupnIVUnolortnoCtesffO)napaJdnaSUrofylno(
VUY/srehtO 00 00
JVT ytilanoitcnuF laitinI egnaR noitcnuF etoN&elbaT emaNeciveD nommoC lap05)VT(
lap05)oediV(
maces05)VT(
maces05)oediv(
VT06 oediV06 BGR05 BGR06 edomciP0
)EVIL(
edomciP1
)EIVOM(
edomciP2
)EMAG(
edomciP3
)LANOSREP(
PI-VTNO
oediV BGR VTediW
oediVediW
yrogetaC oN emaN ceD ceD
JDAS 000 XAMP 360 360 mumixaMerutciP )BGRNPJ+(>ediW/lamroN</)ediW/lamroN(*)oediV/VT( rossecorP-VT 43 43 62 62
100 EUHS 700 510 euH-buS oediV/VT 70 80
200 PHSS 510 360 ssenprahS-buS )BGRNPJ+(VUY/oediV/VT 42 83 51
300 OHSS 000 300 )ciPtnegilletnI(tesffOssenprahS-buS enon 30
400 LOCS 130 360 roloC-buS /)oediv(maces05/)vt(maces05/)oediv(lap05/)vt(lap05BGR06/BGR05/VUY06/VUY05/oediv06/VT06
52 82 52 82 32 62 82 62
500 OOCS 000 300 )ciPtnegilletnI(tesffOroloC-buS enon 20
600 CIP 130 721 ,)dilavni(001>;)dilav(001~0:AG[lortnoCerutciP])dilavni(6tiberongi;)dilav(36~0:srehtO
)ataDteseRresU=lanosreP:AG(edoMerutciP36 53 83 55
700 LOC 130 721 ,)dilavni(001>;)dilav(001~0:AG[lortnoCroloC])dilavni(6tiberongi;)dilav(36~0:srehtO
)ataDteseRresU=lanosreP:AG(edoMerutciP83 13 13 13
800 TRB 130 721 ,)dilavni(001>;)dilav(001~0:AG[lortnoCssenthgirB])dilavni(6tiberongi;)dilav(36~0:srehtO
)ataDteseRresU=lanosreP:AG(edoMerutciP13 53 13 13
900 EUH 130 721 ,)dilavni(001>;)dilav(001~0:AG[lortnoCeuH])dilavni(6tiberongi;)dilav(36~0:srehtO
)ataDteseRresU=lanosreP:AG(edoMerutciP13 13 13 13
010 PHS 130 721 ,)dilavni(001>;)dilav(001~0:AG[lortnoCssenprahS])dilavni(6tiberongi;)dilav(36~0:srehtO
)ataDteseRresU=lanosreP:AG(edoMerutciP24 82 13 13
• shaded items are adjustable data.• no data.
– 16 –
KV-21C
L5KR
M-W
100
JVT ytilanoitcnuF laitinI egnaR noitcnuF etoN&elbaT emaNeciveD nommoC 05 06 srehtO PI-VTNO
oediV txeteleT PI-VTFFO
langiSoN
yrogetaC oN emaN ceD ceD
CNYS 000 SYS 000 100 tupnICNYSYnonoitazinorhcnyS rossecorP-VT 00
100 OF 000 300 tnatsnoCemiT1esahP )FR(langisoNrogninuTotuA/txeteleT/oediV/FFOPIVT/NOPIVT 00 30 10 30 00
200 DIV 000 100 edoMtnedIoediV 06/05 00 00
300 LSF 000 100 cnySlacitreVrofleveLgnicilSdecroF 00
400 LSS 000 100 rotarapeScnySleveLgnicilS 06/05 00 00
500 DIVS 100 700 noitacifitnedIoediVrofnoitceleSecruoS srehtO/VUY 00
600 FROF 000 300 ycneuqerFdleiFdecroF 30
700 KVM 000 100 gniyeKnoisiVorcaM 10
800 TCFA 000 300 )821niP:NPJ,oruE,611niP:SU,AG(lortnoChctiwSgnimiTCFA 30
JVT ytilanoitcnuF laitinI egnaR noitcnuF etoN&elbaT emaNeciveD nommoC srehtO )VT(LAP )VT(CSTN MACES)VT(
LAP)oediV(
CSTN)oediV(
MACES)oediV(
TUPNI-S MACES CSTN VT
yrogetaC oN emaN ceD ceD
CY 000 QRFP 000 300 yaleDdnaycneuqerFretneCgnikaeP rossecorP-VT 00
100 APR 100 300 toohSrevO&erPoitaR rehto/VT 20 10
200 OPR 200 300 skaePevitageN&evitisoPfooitaR rehto/VT 10 10
300 YLDY 210 510 yaleD-Y TUPNI-S/VUY+)OEDIV/VT(*)MACES/CSTN/LAP( 60 60 60 50 50 50 01
400 TAMC 000 300 xirtaM)ASU/napaJ(CSTNroMACES-LAP )BGRNPJ( 00
500 LCA 100 100 gnitimiLroloCcitamotuA 10
600 BC 000 100 ycneuqerFretneCssapdnaBamorhC )xif0:oediV*(VThtiwylnodilav 00
700 OBS 100 300 tesffOkcalBMACES 10
800 ESHC 100 300 ytivitisneStnedICSTN/LAP 20
900 OLC 000 100 retliF)lleB(ehcolCfoycneuqerFretneC 00
010 PRTC 000 100 edoMparTamorhC srehto/MACES 00 10
110 SPB 000 100 eniLyaleDdnab-esaBamorhCfossapyB srehto/CSTN 00 00
210 OCF 000 100 nOroloCdecroF 00
310 TNIT 130 360 lortnoCtniTdnaB-esaB srehtO/VUY 13
410 VUT 000 100 slangiSVUnolortnoCtniT 00
• shaded items are adjustable data.• no data.
– 17 –
KV-21C
L5KR
M-W
100
JVT ytilanoitcnuF laitinI egnaR noitcnuF etoN&elbaT emaNeciveD nommoC srehtO BGR :erutciPeviL
VT)eviL(
VT)srehtO(
oediV)eviL(
oediV)srehtO(
pmeTroloC)LOOC(
pmeTroloC)srehtO(
pmeTroloC)mraW(
pmeTroloC)lartueN(
yrogetaC oN emaN ceD ceD
TCIP 000 LDAC 700 510 leveLevirDedohtaC rossecorP-VT 20
100 AFC 000 300 edoMretliFbmoC 10
200 COS 200 300 leveLgnippilCtfoS 00
300 LWP 100 100 hctiwSgnitimiLetihWkaeP 10
400 LTHW 600 510 gnitimiLetihWkaeP 50
500 MAG 100 100 ammaG 10
600 STW 100 300 hctertSetihWdnalortnoCammaG srehtO/eviL 00 10
700 RFT 000 100 langiSecnanimuLfooitaRrefsnarTCD )BGRNPJ+(srehtO/eviL 00 10
800 ROC 300 300 gniroC )srehto/anyD(*)oediV/VT( 20 20 00 10
900 OROC 000 100 )ciPtnegilletnI(tesffOgniroC 10
010 SKB 300 300 hctertSkcalB srehto/BGR 20 20
110 SAA 100 100 hctertSkcalBehtffohctiwSotaerAkcalB 10
210 KSD 000 100 lortnoCnikScimanyD 00
310 SLB 000 100 hctertSeulB )SREHTO/HGIH(pmetloc 10 00
410 SLBN 000 100 tiucriChctertSeulBnoitarepO 00
510 RRN 000 100 noitcudeRdeRnoN )LAMRON/WOL/HGIH(pmetloc 10 00 00
610 2AFC 000 100 )NPJ&SUrofylnO(noretliFbmoCdecroF enon 00
JVT ytilanoitcnuF laitinI egnaR noitcnuF etoN&elbaT emaNeciveD nommoC VT oediV
yrogetaC oN emaN ceD ceD
WS 000 2VC 000 100 noitceleSlangiStupnI2SBVC rossecorP-VT 00
100 OVS 100 300 84@niPISBVC/OVS/OVFIfonoitcnuF VUY/oediV/VT 10 10
200 LFD 000 100 noitcetorPhsalF 00
• shaded items are adjustable data.• no data.
– 18 –
KV-21C
L5KR
M-W
100
JVT ytilanoitcnuF laitinI egnaR noitcnuF etoN&elbaT emaNeciveD nommoC
yrogetaC oN emaN ceD ceD
MEDS 000 SWMF 000 300 rotaludomeDMFrofnoitceleSwodniW rossecorP-VT 20
100 SSQ 100 100 )ledoMAGtpecxe(edoMrefilpmA)SSQ(dnuoStilpSisauQ 10
200 BPB 000 100 retliFssapdnaBdnuoSfossapyB 00
300 OLMA 000 100 dnuoSMAroflangiStuptuOoiduA 00
400 CVPH 000 100 lortnoCemuloVenohPdaeH 00
JVT ytilanoitcnuF laitinI egnaR noitcnuF etoN&elbaT emaNeciveD nommoC
yrogetaC oN emaN ceD ceD
FIV 000 DFIO 630 360 rotaludomeDFItesffO rossecorP-VT 63
100 TCGA 130 360 revo-ekaTCGA 63
200 MTS 000 100 edoMgninuThcraeS 10
300 DG 000 100 langiS1SBVCnoyaleDpuorG 00
400 SCGA 100 300 deepSCGAFI 00
500 IFF 000 100 LLPFIretliFtsaF 00
600 PMAO 300 300 )metsyS'L&Lylno(edutilpmAlangiStuptuOoediV 30
700 IAV 000 100 )metsyS'L&Lylno(noitcerroCedutilpmAlangiStuptuOImetsyS 10
• shaded items are adjustable data.• no data.
JVT ytilanoitcnuF laitinI egnaR noitcnuF etoN&elbaT emaNeciveD nommoC
yrogetaC oN emaN ceD ceD
TXT 000 VXT 930 360 spilihProfnoitisoPlacitreVtxeteleT redoceDtxeT 73
100 DHT 500 721 tfihSegdEevitcAcnys-HtxeteleT 50
200 RBT 400 510 ssenthgirBBGRtxeteleT 01
– 19 –
KV-21C
L5KR
M-W
100
JVT ytilanoitcnuF .tinI egnaR noitcnuF etoN&elbaT emaNeciveD)sserddAevalS(
)deliateD(eulaVlaitinI/sserddAMVN
yrogetaC .oN emaN ceD ceD nommoC ffO WOW/SRS dnuorrusurT oeretsI onomI )oruE(L-VT VT oediV
PSDS 000 MVA 200 700 edoMLVA DSS 20
100 VVA 500 510 leveLecnerefeRLVA )h08( 90
200 LBB 000 510 ruotnoCEBB 00
300 HBB 000 510 ssecorPEBB 00
400 WLBB 000 510 tesffOruotnoCEBB 60
500 FOVS 000 510 tesffOemuloVedoMtceffE/dnuorruS onomI/oeretsI/dnuorrusurT/)WOW/SRS(ffO 00 70 00 20 00
600 FOVI 000 700 tesffOevitisoPemuloVretsaM
700 FOVE 000 700 tesffOevitageNemuloVretsaM 60
800 DAL 000 130 tsujdAleveLredoceD 60
900 MAL 000 130 tsujdAleveLonoM 50
010 NAL 000 130 tsujdAleveLmaciN 50
110 SAL 000 130 tsujdAleveLPAS 71
210 AAL 000 130 tsujdAleveLCDA oediV/Lnon-VT/L-VTI)oruEnoN(oediV/vT 80 00 00 00
310 FES 300 700 tceffEoeretS/onoMelbidercnI onomI/oeretsI 50 30
410 L1A 000 552 tfeLemuloV1XUA 00
510 R1A 000 552 thgiRemuloV1XUA 00
610 SAB 800 510 tesffOssaBniaM 41
710 ERT 800 510 tesffOelberTniaM 11
810 1QE 800 510 tesffO)zH001(dnaBlennahCniaMrezilauqE 01
910 2QE 800 510 tesffO)zH003(dnaBlennahCniaMrezilauqE 10
020 3QE 800 510 tesffO)zH0001(dnaBlennahCniaMrezilauqE 00
120 4QE 800 510 tesffO)zH0003(dnaBlennahCniaMrezilauqE 01
220 5QE 800 510 tesffO)zH0008(dnaBlennahCniaMrezilauqE 00
320 TCFB 500 700 lortnoCEBBdnaBUD,EBD 00
420 NECS 100 510 lortnoCretneCD3SRS 40
520 APSS 000 510 lortnoCecapSD3SRS 10
620 WHBB 000 510 edomWOWnitesffossecorpEBB 00
720 ERTS 200 700 edomdnuorrusroftesffOelberT 10
820 THBB 000 510 edomVTnitesffOEBB 00
920 AWD 000 000 ???AWD 00
030 ERTT 200 700 edoMVTnitesffOelberT 30
– 20 –
KV-21C
L5KR
M-W
100
JVT ytilanoitcnuF .tinI egnaR noitcnuF etoN&elbaT emaNeciveD)sserddAevalS(
nommoC
yrogetaC .oN emaN ceD ceD
CEDS 000 UTPM 300 510 )CSTB(noitcetedtolipXPMrofdlohserhTreppU DSS 20
100 LTPM 900 510 )CSTB(noitcetedtolipXPMrofdlohserhTrewoL 50
200 UTPS 300 510 noitcetedreirracPASrofdlohserhTreppU 80
300 LTPS 600 510 noitcetedreirracPASrofdlohserhTrewoL 51
400 HT1C 000 130 1CSfonoitcetedrofdlohserhTlamroN 00
500 PA1C 000 130 1CSfonoitcetedrofdlohserhTmargorPotuA 00
600 HTPS 000 130 PASfoetumotuarofdlohserhTesioN 00
700 YHPS 400 510 PASfoetumotuarofezissiseretsyH 30
800 HTMF 000 130 dradnats2AMFni2CSfoetumotuarofdlohserhTesioN 81
900 YHMF 400 510 dradnats2AMFni2CSfoetumotuarofezissiseretsyH 70
010 HTTB 000 130 reirracoeretsCSTBfoetumotuarofdlohserhTesioN 00
110 YHTB 400 510 oeretsCSTBfoetumotuarofezissiseretsyH 30
210 HTJE 000 130 reirracbusMFJAIEfoetumotuarofdlohserhTesioN 00
310 YHJE 400 510 reirracbusMFJAIEfoetumotuarofezissiseretsyH 40
410 YLNO 000 100 tuptuoCEDnoMACINdetalerylnoecudorpeR 00
510 MAXE 000 100 )PEDD(LdradnatsnietumotuafoesacniecruoskcabllaF 00
610 TMIN 000 100 )PEDD(etarrorretibnodnepednoitcnufetumotuaMACIN 00
710 ELIN 001 552 )PEDD(timilrorrerewolMACIN 05
810 EUIN 002 552 )PEDD(timilrorrereppuMACIN 002
910 DMPE 100 300 )PEDD(gnimmargorPysaECEDMED 10
020 SDTS 910 130 sedomSSSdnaDSArofdexelpitlumstiB 91
120 AMVO 100 100 noitpadanoitaludomrevoMF 00
220 WBLF 000 300 htdiwdnabretlifrotaludomedMA/MF 30
320 DMDI 000 300 edomSSSnideepstnediMF 00
420 LAPF 000 100 gnidocedCSTBrofycneuqefeniL 00
520 TMVO 100 200 lanimonotevitalerdlohserhtlevelnoitaludomrevO 30
620 IXCD 000 100 retrevnIlortnoCgnilacSOXCDMACIN 00
720 GXCD 000 700 niaGlortnoCgnilacSOXCDMACIN 00
820 LLCD 110 510 )L(timiLlortnoCgnilacSOXCDMACIN 00
920 HLCD 000 130 )H(timiLlortnoCgnilacSOXCDMACIN 00
030 UEDI 100 300 DTS2AnaeporuErofgnittesDOMDI 00
130 RKDI 100 300 DTSMnaeroKrofgnittesDOMDI 00
230 PJDI 100 300 DTSJAIErofgnittesDOMDI 00
– 21 –
KV-21C
L5KR
M-W
100
JVT ytilanoitcnuF laitinI egnaR noitcnuF etoN&elbaT emaNeciveD nommoC 05 06
yrogetaC oN emaN ceD ceD
MTPO 000 THSA 600 700 )nim5*atad(remitffotuhsotua 60
100 BDSO 000 510 ssenthgirBDSO h06orciM/RMM 30
200 HDSO 500 510 noitisoPlatnoziroHDSO h06orciM/RMM 60
300 VDSO 730 360 noitisoPlacitreVDSO 06/05 h06orciM/RMM 16 33
400 ETUM 000 100 )delbane=1(hctiwSetuMlangiSoN 10
500 LUFR 510 510 )hf0nehwelbasiD(dekcolnUretfaretnuoCegnahClangiSFR 40
600 KLFR 510 510 )hf0nehwelbasiD(dekcoLretfaretnuoCegnahClangiSFR 00
700 LUVA 510 510 )hF0nehwelbasiD(dekcolnUretfaretnuoCegnahClangiSVA 51
800 KLVA 510 510 )hF0nehwelbasiD(dekcoLretfaretnuoCegnahClangiSVA 51
900 GNAL 000 300 noitidnocgnippihsegaugnalDSO 00
010 TXTH 000 100 wsrotarapescnys rossecorP-VT 00
110 SSMC 000 100 wscnyS rossecorP-VT 10
210 OXCD 721 552 eulaVhsalFmorftesffoOXCD h06orciM/RFS 07
310 LBXE 000 510 esioNetihWetanimilEotremiTgniknalBdednetxE 70
410 SYST 000 300 )ledoMAG(teseRtseTtaMVNnimetsySVTeziromeM 00
510 UOVT 100 100 )ledomORUE(langistuohtiwetuM:1,ffoetuMsyawlA:0noitidnoCetuMtuOVT 10
JVT ytilanoitcnuF laitinI egnaR noitcnuF etoN&elbaT emaNeciveD nommoC
yrogetaC oN emaN ceD ceD
BTPO 000 LLAI 000 100 )MVNnideziromemton(hctiwSetirWdradnatS 00
100 1BPO 000 552 )detalermetsyS(1noitpO *
200 2BPO 000 552 )detalerlangiSoediV(2noitpO *
300 3BPO 000 552 )detalergnidoceDoeretS(3noitpO *
400 4BPO 000 552 )suoenallecsiM(4noitpO *
500 5BPO 000 552 )suoenallecsiM(5noitpO *
600 6BPO 000 552 )detaleregaugnaLDSO(6noitpO *
700 TWSB 000 510 )MVNnideziromemton(emiTtiaWhctiwSdnaB 00
• shaded items are adjustable data.• no data.• * Please refer page 22 and 23.
– 22 –
KV-21CL5KRM-W100
HDEV (High Deviation Mode) 0 = disabled, 1 = enabledNICAM ST (NICAM Stereo) 0 = disabled, 1 = enabledNICAM BI (NICAM Bilingual) 0 = disabled, 1 = enabledA2 ST/BI (A2 [West German] Stereo/Bilingual) 0 = disabled, 1 = enabledThai Bilingual (A2 [Thai] Bilingual) or Force SAP if JP/US ST is active 0 = disabled, 1 = enabledJP/US ST (JP/US Stereo) 0 = disabled, 1 = enabledKorean ST (Korean Stereo) 0 = disabled, 1 = enabledMONO (Monaural Model) 0 = Stereo (SSD) Model, 1 = Monaural Model
Item
KV-21CL5K
OPB3
MONO
1
Korean ST
0
JP/US ST
0
Thai Bilingual
0
A2 ST
0
NICAM BI
0
HDEV
0
NICAM ST
0
NOTE• shaded items are adjustable data.• no data.• Standard data listed on the Adjustment Item Table are reference values, therefore it may be different for each model and
for each mode.• Note for Different Data: Those are the standard data values written on the microprocessor. Therefore, the data values of
the modes are stored respectively in the memory. In case of a device replacement, adjustment by rewriting the datavalue is necessary for some items.
Item
KV-21CL5K
OPTION NOTEOPB1
SPEED SEARCH (Time of speed search) 00 = disabled (original cycle speed),01 = 4 time speed from the original,10 = 6 time speed from the original,11 = 8 time speed from the original
TV System Selection 0 = disabled, 1 = enabled
D/K
1
I
1
B/G
1
L(Euro),M(GA)
0
L'
0
M/N
00 1
SPEED SEARCH
D1 (D1 Terminal) 0 = not available, 1 = availableAV Multi/PAM (AV Multi Terminal) – JP 0 = not available, 1 = available
Portable Audio Mode – GA 0 = not available, 1 = availableComponent (Component [YCbCr] Terminals) 0 = not available, 1 = availableComposite (No. of Composite Terminals) 00 = no composite terminal (Euro : no Scart) BX1L: No Video(SCART) (No. of SCART Terminals) 01 = 1 composite terminal (Euro : 1 Scart) BX1L:2 Video in
10 = 2 composite terminal (Euro : 2 Scart) BX1L:3 Video in11 = 3 composite terminal (Euro : no terminal BX1L: 4 Video in)
SECAM (SECAM Color System) 0 = disabled, 1 = enabledColor decording (Color Crystal Selection) 00 = PAL/NTSC/SECAM (Multi), 01 = NTSC (3.58MHz)
10 = PAL/NTSC/SECAM (4.43MHz), 11 = PAL/NTSC (Tri-Norma)
Item
KV-21CL5K
OPB2
SECAM
1
Component
0
D1
0
AV Multi/PAM(GA)
0
DEC
71
1 0 0 0
DEC
20
Composite (SCART) Color decording
DEC
00
– 23 –
KV-21CL5KRM-W100
GA US (US Model Destination) 0 = US/Canada/Latin,1 = Taiwan/Korea/Philippine
Latin (US Model Latin Destination) 0 = US/Canada (No Volume Figure Display)1 = Latin (Volume Figure Display)
Feature 2 (Temporary for BX1L) 0 = Comb Not available1 = Comb Available
Feature 1 (Temporary for BX1L) 0 = PiP Not available1 = PiP Available
OSD Language Selection US 01xx = French,(English always available except JP) 0x1x = Spanish
0xx1 = Portuguese
US (GA NTSC) 1x1x = Complicated Chinese,1xx1 = Korean
GA 1xxx = Simplified Chinese,x1xx = Arabic,xx1x = Thaixxx1 = Vietnamese
EU 0000 = Destination ADE0001 = Destination BL0010 = Destination KR0011 = Destination U
Item
KV-21CL5K
OPB6
100
Feature 1
0
Feature 2
0
GA US
0
Latin
0
OSD Language Selection
Full Surround (Full Surround option - no for euro model) 0 = Normal surround model,1 = Full surround model (Off/simulated/surround/SRS/WOW/TruSurround
No Surround (No Surround Model) 0 = Surround Model, 1 = Non-Surround ModelForced 60 (Forced 60Hz in no signal) 0 = 50Hz, 1 = 60HzASD (Automatic Standard Detection) 0 = disabled, 1 = enabledTilt (Tilt Correction/PIC Rotation) 0 = disabled, 1 = enabledIP Plus (Intelligent Picture Plus) 0 = disabled, 1 = enabledIP (Intelligent Picture) 0 = disabled, 1 = enabledWide (Wide Mode/V-Compressed) 0 = disabled, 1 = enabled
Item
KV-21CL5K
OPB5
Wide
1
IP
1
IP Plus
1
Tilt
1
ASD
0
Forced 60
0
Full Surround
0
No Surround
1
Firmware (SSD Firmware Downloading) 0 = disabled, 1 = enabledSMAT Surround Matrix 0 = Active, 1 = Passive1 spk Models 1 Speaker Models 0 = 2 or 3 Speakers Models, 1 = 1 speaker ModelsVM (Velocity Modulation) 0 = disabled, 1 = enabledEqualizer (5-band Equalizer Model) 0 = Bass/Treble Model, 1 = Equalizer ModelSurround (US/GA Surround Selection) 0 = Off/Simulated/Surround,
1 = Off/Simulated/WOW/TruSurround (US)1 = Off/Simulated/SRS(3D)Surround (GA)
V-Chip (V-Chip Model) 0 = Channel Block Model (no rating)1 = Parental Control Model (rating)
TOP (Forced TOP) 0 = Auto Mode (TOP/FLOF), 1 = Forced TOPTEXT (Teletext Model) 0 = Non-Teletext Model, 1 = Teletext Model
Item
KV-21CL5K
OPB4
TEXT
1
TOP
0
V-Chip
0
Surround
0
Equalizer
0
VM
0
Firmware/SMAT
0
1 spk Models
0
DEC
01
DEC
79
0
DEC
02
– 24 –
KV-21CL5KRM-W100
3-3. T-MODE:
T-Mode is available by pressing the 'TEST' button once,OSD 'T' appears. The function described below areavailable by selecting the indicated keys. The 'T' is releasedautomatically after each command is executed.
KEY T-MODE FUNCTION
volume + volume maximum
volume – volume minimum
picture + picture maximum
picture – picture minimum
colour up colour maximum
colour down colour minimum
brightness-bright brightness maximum
brightness-dark brightness minimum
hue-purplish hue-purplish
hue-greenish hue-greenish
sharpness-sharp sharpness maximum
sharpness-soft sharpness minimum
balance left balance full left (only stereo)
balance right balance full right (only stereo)
treble up treble maximum (only stereo)
treble down treble minimum (only stereo)
bass up bass maximum (only stereo)
bass down bass minimum (only stereo)
3-4. TT-MODE:TT-Mode is available by pressing the 'TEST' button twice,OSD 'TT – –' appears. The function described below areavailable by pressing two digits.
00 Exit from TT mode
01 Set Picture Level to Maximun
02 Set Picture Level to Minimum
03 Set Volume to 35%
04 Set Volume to 50%
05 Set Volume to 65%
06 Set Volume to 80%
07 Ageing Mode On
08 Shipping Condition
11 Sub Picture Adjustment
12 Sub Colour Adjustment
13 Sub Brightness Adjustment
14 Text H Position Adjustment
15 Rotation Coil Test
19 Factory Mode Enable/Disable
21 Destination ADEKR
22 Destination BL
24 Destination U
31 Auto Shutoff Disable/Enable
33 Rotation On/Off
41 Re-initialise NVM
43 Select Dual A Sound (only stereo)
44 Select Dual B Sound (only stereo)
45 Select Mono Sound (only stereo)
46 Select Stereo Sound (only stereo)
48 Set NVM as non-virgin
49 Set NVM as virgin
61 Auto AGC Adjustment
64 RGB priority (toggle)On: FS input (Pin 16)is always activeOff: FS input is active only in AV1 (Scart)
65 RGB Auto Detection (Toggle)Auto: AV1 or RGB is automatically selected atthe change of AV input to AV1 (Scart) by user ormode Pin 8Off: AV input toggle has AV1 and RGBrespectively (TV --> AV1 --> RGB --> AV2 -->...)
67 Manual AGC Adjustment
71 Force PAL Video
72 Un-force PAL (cancel the function above)
73 Enable Zweiton D/K2 System (6.5/6.74)(only stereo)
74 Enable Zweiton D/K3 System (6.5/5.74)(only stereo)
78 Balance Full Left (only stereo)
79 Balance Full Right (only stereo)
81 Auto NICAM DCXO calibration (only stereo)
87 Local Keys Test
93 Set 16:9 zoom mode
95 Set 4:3 Zoom Mode
99 Display Error and Working Time Menu
To release the 'TT-Mode', press 0 twice, press 'TEST',press 'TV' or switch the TV into standby mode.
3-5. T-Cyan MODE:
T-Cyan Mode is available by pressing the 'TEST' and 'Cyan'keys. T-Cyan is basically for white balance and geometryadjustments. The functions described below are availableby pressing the indicated keys.In T-Cyan Mode a single 'T' is displayed in cyan colour. Torelease from this mode, press the 'TV' key once.
KEY T CYAN FUNCTION
1 Pin Amplitude –
2 Vertical Centre –
3 Pin Amplitude +
4 Vertical Centre –
5 Vertical Size +
6 Horizontal Centre +
7 Horizontal Size –
8 Vertical Centre +
9 Horizontal Size +
0 Vertical Size –
Volume + Upper Corner Pin +
Volume – Lower Corner Pin +
Programme + Upper Corner Pin –
Programme – Lower Corner Pin –
Cyan Bow –
Yellow Pin Phase –
Green Bow –
Red Pin Phase +
Video Vangle +
Information Vangle –
– 25 –
KV-21CL5KRM-W100
3-6. SUB BRIGHTNESS ADJUSTMENT
1. Input a PAL monoscope pattern.2. Go to Test Mode.
3. Press 'Test' 'Test 13' on the Remote commander.PICTURE MINIMUM, BRIGHTNESS 50%
4. Select WHBL "SBRT" by pressing right or left
button and adjust "SBRT" data. To adjust the data,again press right to increase or left to decrease thedata until there is barely a difference between 0 IRE
and 10 IRE signal levels.
3-7. SUB CONTRAST ADJUSTMENT
1. Select Video Mode.2. Input PAL Colour Bar to TV set.
3. Set the following condition:PICTURE 100%, COLOUR 0%, BRIGHTNESS 50%(IN PERSONAL MODE)
4. Connect an oscilloscope to pin 4 (R output) of CN004.5. Enter Service Menu.6. Set PICT 03 "PWL" to 00 and WHBL 17 "BLBG" to 01.
7. Select SADJ "PMAX" with right or left button of thecommander then adjust VR within spec with right orleft button.
8. Set "PWL" and "BLBG" back to initial data respectively.
OR
1. Input a video signal that contains a small 100% white
area on a black background.2. Connect a digital voltmeter to pin 10 of J751 (C board).3. Adjust the sub-contrast ("TT11") to obtain a voltage of
86+/–5V.
VR
3-8. SUB COLOUR ADJUSTMENT
1. Receive a PAL colour bar signal.2. Connect an oscilloscope to Pin 2 of CN004(A board).
3. Enter into the Service Menu.4 Set PICT 06 "WTS" to 00.5. Adjust SADJ "SCOL" data so that the cyan, magenta
and blue colour bars are equal level.
3-9. TUNER AGC ADJUSTMENT
Note: There should be no need to adjust the AGC as this
is pre-adjusted during manufacturing. If the AGCdoes need adjustment then follow steps 1 to 4 asbelow.
1. Receive a signal of 61dBuV/75ohm terminated via the
tuner antenna socket.2. Connect a voltmeter to the AGC pin 5 of CN904 (mount
side of A board).
3. Confirm that the AGC voltage is 3.2volts +/–0.5volts.4. If adjustment is required, then re-adjust the AGCT in
service menu to obtain a voltage of 3.2V +/–0.5V.
B-Out Waveform
same level
PIN 5
[ Print side of A board ]
VR = 1.50 ± 0.03 Vp-p(Difference is within 30mV)
– 26 –
KV-21CL5KRM-W100
3-10. DEFLECTION ADJUSTMENT
1. Set the TV mode to normal (4:3).2. Enter into the 'GEOMETRY' service menu.
3. Select and adjust each item in order to obtain theoptimum image. (see table below)
4. Repeat the above for 16:9.
GEOMETRY
RemarkHPOS (0,63) Adj Horizontal ShiftHPAR (0,63) Adj Horizontal ParallelogramHBOW (0,63) Adj Horizontal BowVLIN (0,63) Adj Vertical LinearityVSCR (0,63) 31 Vertical ScrollHSIZ (0,63) Adj EW WidthEWPW (0,63) Adj EW Parabola/WidthUCOP (0,63) Adj EW Upper Corner ParabolaLCOP (0,63) Adj EW Lower Corner ParabolaEWTZ (0,63) Adj EW TrapeziumVSLP (0,63) 31 Vertical ScopeVSIZ (0,63) Adj Vertical AmplitudeSCOR (0,63) Adj S-CorrectionVPOS (0,63) Adj Vertical ShiftWBF (0,63) 06 Timing of Wide BlankingWBR (0,63) 06 Timing of Wide Blanking
EW Width (HSIZ)
Vertical Amplitude (VSIZ)
EW Trapezium (EWTZ)
Horizontal Shift (HPOS)
Horizontal Parallelogram (HPAR)
EW Parabola/Width (EWPW)
EW Lower Coner Parabola (LCOP)EW Upper Coner Parabola (UCOP)
Vertical Shift (VPOS)
Vertical Linearity (VLIN)
S-Correction (SCOR)
– 27 –
KV-21CL5KRM-W100
SECTION 4DIAGRAMS
4-1. BLOCK DIAGRAM
FS
S T
UN
ER
SIF
SA
W
VIF
SA
W
PO
WE
R
Col
orD
ecod
er ON
E C
HIP
Mic
roTe
xtV-
chip
YU
VP
roce
ssor
RG
B
Jung
le
DA
C
I/O p
ort
VIF
& S
IF D
e-em
phas
is
PLL
A D C
Stereo, DSP
RG
B A
mp
V-ou
t
LED
B-I
NT IIC
Dev
ice
NV
M
SIR
CS
Key
but
tons
24.5
76M
Hz
RG
B
AV1
AV3
IN
SC
AR
T 1
IN
AV3
AV2
Mon
out
FB
Tfe
edba
ck
Pin
out
H-d
rive
H-o
ut
Aud
io A
mp
2ch
ATT
HP
RL
5W5W
Rot
. Cct
DG
C
HV
MA
INP
ower
Sup
per
RG
B
EW
, Hd
L, R
L, R
mut
e
stdb
y
Rel
ay
+/-1
5V
1.8V
RE
SE
T
CIS
PR
IF
12C
5V30
V
STBY
3.3V
1.8V
5V8V
DG
C R
ELAY
115
3.3/
5V KR KG Hou
tKB
8VAU
DIO
VC
C
+B li
ne
30V
RG
Bout
85
~ 87
.IK
84
23.V
D+
22.V
D-
RO
T C
TRL
112
RO
T SW
113
21.E
WD
67.H
OU
T
66.A
FC
32.E
HTO
83.A
BL
60,6
1.LS
L,LS
R
AUD
IO M
UTE
106
49,5
0.In
L2,In
R2
CV
Rou
tLo
utTV
out
G B R FBLKRLC
VM
ode
1
L R
51.C
VBS2
/Y2
120.
S258
.CVB
S1/Y
159
.C1
56,5
7.In
L1,In
R1
48.M
ON
OU
T
36,3
7.O
utL,
R
62,6
3.SC
ARTH
PL,
SCAR
THPR
64.C
VBS0
77.S
CAR
TFBL
78~8
0.R
GB3
53,5
4.In
L3,In
R3
55.C
VBS3
116.
Mod
e 1
31.A
GC
out
11.X
talo
ut
10.X
talin
119.KEY
97.SIRCS
99.SDA1
write protect
108,109,SCL0,SDA0
102.BINT
122~3.RED LED,GREEN LED
AUD
IO S
TBY
105
IK
V+, V
-
On/
Off
Hp EH
T, A
BL
AGC
in
AC in
220
~ 24
0V 5
0Hz
SC
AR
T 2
IN
Rou
tLo
utC
V ou
tRL
CV
YC
Mod
e 2
TV
out
– 28 –
KV-21CL5KRM-W100
4-2. CIRCUIT BOARDS LOCATION
4-3. SCHEMATIC DIAGRAM
Note:• All capacitors are in µF unless otherwise noted.• All electrolytic capacitors are rated at 50V unless otherwise noted.• All resistors are in ohms.
kΩ = 1000Ω, MΩ = 1000kΩ• Indication of resistance which does not have rating electrical
power is as follows.
Pitch: 5 mmRating electrical power 1/4W (CHIP: 1/10W)
• : nonflammable resistor.• ¢ : internal component.• : panel designation or adjustment for rrepair.• All variable and adjustable resistors have characteristic curve B
unless otherwise noted.• Readings are taken with a color-bar signal input.• Readings are taken with a 10 M Ω digital multimeter.• Voltage are dc with respect to ground unless otherwise
noted.• Voltage variations may be noted due to normal production
tolerances.• All voltage are in Volt.• : Cannot be measured.• Circled numbers are waveform references.• : B +bus.• : B –bus.• k : signal path.
Note: The reference number which starts with Wxxx(eg: W003) indicates a wire to wire connection.
Note: Components marked as XX are not fitted on thismodel.
Reference informationRESISTOR : RN METAL FILM
: RC SOLID: FPRD NONFLAMMABLE CARBON: FUSE NONFLAMMABLE FUSIBLE: RS NONFLAMMABLE METAL OXIDE: RB NONFLAMMABLE CEMENT: RW NONFLAMMABLE WIREWOUND: ADJUSTMENT RESISTOR
COIL : LF-8L MICRO INDUCTORCAPACITOR : TA TANTALUM
: PS STYROL: PP POLYPROPYLENE: PT MYLAR: MPS METALIZED POLYESTER: MPP METALIZED POLYPROPYLENE: ALB BIPOLAR: ALT HIGH TEMPERATURE: ALR HIGH RIPPLE
Note: The component identified by shading and mark! are critical for safety. Replace only with partnumber specified.
Note: “A” board schematic diagram is divided into 6 Block.Each block is named by its function and block “alphabet”.eg: Processor (Block A)Joint connection between boards can be identified usingthe block alphabet followed by sequence numbering.eg: -<HOUT-DEFL (A10) To D11Meaning: Block A joint A10 is connected to Block D jointD11
C Board
A Board
A
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
B
C
D
E
F
G
H
I
J
KV-21CL5KRM-W100
KV-21CL5KRM-W100
4-3-1. A Board – Processor (Bloc k A)
– 30 –– 29 –
2.2C073
16V0.1
B:CHIP
C069
2.2C064
3900B
C061
16V0.1
B
C063
XX
B:CHIP
C019
16V0.22C022
22C024
22C029
XXC031
RN-CP100R038
CH
IP10
0R
039
RN-CP100R041
100R056
100R058
16V0.1
B
C038
4.7C037
CHIP0R356
16V0.1
B
C054
UDZS-TE179.1BD023
UDZS-TE179.1BD024
UDZS-TE179.1BD025
MMDL914T1D059
MMDL914T1D058
MMDL914T1D057
16V0.22C030
35V47
C026
16V0.1
C02816V0.22C025
10V0.47
B:CHIP
B:CHIPB:CHIP
B:CHIP
C023
4700pB
C041
16V0.22
B:CHIP
C042
16V0.22
B
C048
25V0.022
B
C049RN-CP
RN-CP
RN-CP100R045
100R046
100R048
1000pB
C052 1000pB
C089
1000pB
C081
1000pB
C080 UD
ZSTE
-175
.6B
D06
5
UDZSTE-175.6BD064
25V0.01
B
C057
RN-CP
RN-CP
RN-CP RN-CP
680R061
100R060
1000pB
C058
1MR312
150kR313
Q009XX
MSD601-RT1Q008
RN-CPXX
R326
XXB
C084
UDZSTE-175.6BD062
XXC079
47kR311
1kR310
UDZSTE-175.6BD060
MMDL914T1D061
RN-CPXX
R327
CHIP0
R307
CHIPXX
R308
CHIPXX
R305
CHIPXX
R306
1MR309
2.2MR303
RN-CP330kR304
CHIPXX
R302
RN-CP
RN-CP
RN-CP
RN-CP RN-CP
RN-CP
2.2MR301
100R300 68P
CH
C078
16V0.047
B
C077
470pCH
C010
XXB
C009
35V47
C008
CHIP
R3600
CHIP
R361XX
CHIP
R3630
CHIP
R362XX
RN-CP100
R331
RN-CP100
R323
:RN-CP100R020
100R018100
R030
CHIP2.2KR023
100R024
100R341
RN-CP
RN-CP
RN-CP
100R025
100R339
87
65 4
32
1
CAT24WC16JI-TE13IC003
100pCH
C001
100pCH
C003
RN-CP
RN-CP
100R002
RN-CP100R004
16V0.1
B
C092
16V0.1
B
C093
16V0.1
B
C094
16V0.1
B
C095
16V0.1
B
C096
GR
SPB-25MVWFD914
220R096
220R097
CHIPXX
R006
MMDL914T1D003MMDL914T1
D002
12
RN-CPRN-CP
RN-CP
RN-CP
RN-CP2.2kR012
100pCH
C021
10kR010
16V
16V0.22C014
16V0.22
B:CHIP
B:CHIP
C018
100R014
16V0.1
B
C02010k
R340
RN-CP
RN-CP
RN-CP
RN-CP
2.2kR324
4.7kR338
470R337
D067XX
XX
RN-CP4.7kR320
100pCH
C091
12
16VXX
B
C011
100R029
100pCH
C090RN-CP4.7kR322
16V0.22
B
C012
100R026
123
WHT3P
CN005
GNDNC
KEY
GP08DD066
CHIP
R316XX
MMDL914T1D056
3.3kR001
RN-CP
RN-CP
RN-CP
RN-CPRN-CP3.3k
R003
D00
4X
X
16VXX
F
C051
16VXX
F
C068
16VXX
F
C07116VXX
F
C097
16VXX
F
C098
16VXX
F
C099
D006XX
D007XX
D008XX
D009XX
1 2 3 4 5
WHT5P
CN007
Y O
UT
GN
DU
OU
T / F
BG
ND
V O
UT
1 2 3 4
4P
CN003
WHT
+B NC
GN
DV
M O
UT
1 2 3 4 5
YEL5P
CN009
Y IN
/ G
GN
DU
IN /
BV
IN /
RG
ND
JW1088XX
JW1089XX
JW1090XX
JW1091XX
JW1092XX JW1093
XXJW1094
XXJW1095
XX
2SIF
SIF
IN2-
IFS
IFIN
1-IF
VIF
IN2-
IF
EW
D-D
EFL
OV
P-D
EFL
VD
+-D
EFL
VD
--D
EFL
VIF
IN1-
IF
+B HO
UT-
DE
FLA
FC-D
EFL
LSL-
AU
DIO
TUA
GC
-IF
-13V
-DE
FL
AB
L
AUDIO-STDBY
PW
R-O
FF-M
UTE
DG
C-R
ELA
Y
SC
L-0
SD
A-0
MO
MU
TE-A
UD
IO
M-S
YS
-IF
D1_
JP/M
OD
E1_
EU
9V 3.3V
5V
AU
DIO
-MU
TE
STB
Y_S
W
VG
UA
RD
-DE
FL
LSR
-AU
DIO
AG
C-M
UTE
S1/
VC
C1CVBS1/Y1INR1INL1CVBS3INR3INL3
CVBS2/Y2INR2INL2MON-OUT
IFVO/IF_MON_OUT
OUTROUTL
D1_
JP/M
OD
E2_
EU
/M
ON
SW
-MO
NO
SCARTHPLSCARTHPRCVBSO
10uHL003
10uHL005
10uHL006
10uHL007
10uHL008
10uHL009
MONO_OUTL
ROT_CTRL
ROT_SW
16V0.22
B
C300
CHIPXX
JR1010
MMDL914T1D063
TP02
TP03TP04
RN-CPXXR319
RN-CPRN-CP
2.2kR042
10 10CH
C032
CH
C034
VCCGND
OUT
RPM7240-H5IC002
470pCH
C301
B_DAT
B_INT
B_CLK RN-CP
RN-CP
RN-CP
220R099
RN-CP10k
R355
16V2.2
F
C302
RN-CP1kR364
:CHIP0JR1011
1.8V
_AU
DIO
1.8V
_MA
IN
W003
W004
W008
10uHL012
UN2216Q006
UN2216Q007
RN-CP RN-CP220
R087220
R098
D005XX
RN-CP68k
R379
100R380
25V0.01
B
C308
W009
W010
W011
25V0.01
B
C072
16V100C004
25VXX
B
C309
CHIPXX
R382
CHIP12kR044 25V6800p
B
C046
16V2.2
C044
F
RN-CP6.8kR314
RN-CP6.8kR315
CHIP100R384
100R385
CHIP100R386
SCARTFBL/A16
RN-CP39kR051
16V470
C002
16V100C304
16V100C036
16V100C056
16V100
C005
16V100C006
RN-CP
RN-CPRN-CP
4.7kR336
UDZSTE-175.6BD068
UDZSTE-175.6BD054UDZSTE-175.6B
D055
0.15C055
1 2 3 4 5 6 7
WHT7P
CN004
GN
DB
OU
TG
OU
TR
OU
TG
ND
IK 9V
100C013
2.2C311
10C314
R387
3.3C065
0.001B
C312
0.001B
C313
W022
W015
D069
XX
XX
D070
25V0.022
B
C053
MSB709-RT1 Q010
CHIP1K
R059
CHIP1.5K
R377
CHIPR392
10k
1.5kR015
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 2021 22 23 24 25 26 27 28 29 30 31 32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
6566676869707172737475767778798081828384858687888990919293949596
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
TDA12027H/N1B0B0PJ IC001
VS
SP
2V
SS
C4
VD
DC
4(1.
8V)
VD
DA
3(3.
3V)
VR
EF_
PO
S_L
SL
VR
EF_
NE
G_L
SL+
LSR
VR
EF_
PO
S_L
SR
+HP
LV
RE
F_N
EG
_HP
L+H
PR
VR
EF_
PO
S_H
PR
XTA
LIN
XTA
LOU
TV
SS
A1
VG
UA
RD
DE
CD
IGV
P1
PH
2LF
PH
1LF
GN
D1
SE
CP
LLD
EC
BG
EW
D
VD
-V
D+
VIF
IN1
VIF
IN2
VS
CIR
EF
GN
DIF
SIF
IN1
SIF
IN2
AG
CO
UT
EH
T0
AVL/2SIF
D1 LIND1 RINOUTLOUTR
DECSDEMMONO_OUTL
GND2PLLIF
SIFAGC/SCARTIFVO/IF_MON_OUT
INTC0-IFVCC8V
AGC2SIFVP2
MON-OUTINL2INR2
CVBS2/Y2C2
INL3INR3
CVBS3INL1INR1
CVBS1/Y1C1
LSLLSR
SCARTHPLSCARTHPR
CVBS0
VM
AFC
HO
UT
VS
SC
OM
BV
DD
CO
MB
VIN
UIN
YIN
YS
YN
CY
OU
TU
OU
TV
OU
T
SC
AR
TFB
LR
-Y/R
INY
/GIN
B-Y
/BIN
GN
D3
VP
3A
BLIK
R O
UT
G O
UT
B O
UT
VD
DA
(3.3
V)
VR
EFA
D_N
EV
RE
FAD
_PO
VR
EFA
DG
ND
AV
DD
A(1
.8)
VD
DA
2V
SS
AD
CV
DD
AD
C(1
.8)
SIRSC
SCL1
SDA1
VDDC2
VSSC2B INTD1_JP/MODE2_EU/MONSW-MONOMOMUTE-AUDIOAUDIO STDBYAUDIO MUTEHD SWSCL0SDA0VDDP(3.3V)S1/VC(GA)ROT CTRLROT SWSTBY_SWDGC RELAYD1_JP/MODE1_EUVDDC1(1.8V)DECV1V8KEYS2VSSC1/PRED LEDGREEN LEDVDDC3(1.8V)VSSC3AGC-MUTESECAM L-LM-SYS-IF
24.5MHzX001
MMDL914T1D071
MMDL914T1D072
10V0.47
B
C316
UN2211Q016
4.7kR394
47uHL004
16V220C317
1.1uHFB001
16V100C303
10C050
16V0.1
B
C318
100R393
47pCH
C319
47pCH
C320
RN-CP
RN-CP
RN-CP
RN-CP
3.3kR317
C015
UN2213Q001
OC
P-P
RO
TEC
T
D073XX
100kR395
10uHL010
10uHL011
10uHL013
10uHL031
10uHL032
10uHL033
10uHL035
10uHL036
XXL037
W030W031
W032
W033 W034
MMDL914T1D074
W037
Q012
Q013
XX
XX
XX
XX
XX
XXXX
XXMSD601-RT1
Q014
C315
C310
R381R383
R388
CHIP1kR011
25V0.01
B
C321
0.001B
C322
W038 W039
0.001B
C323
W042
W043
W044
S2
B_DAT
B_I
NT
APROCESSOR (BLOCK A)
B-BX1s11705-OIRT-A..(BLOCK A)-21CL5K
(A1)
To
B6
(A2)
(A3)
To
C1,
D18
(A4)
To
C9,
D12
,E16
,F1
(A5)
To
E14
(A6)
To
E15
(A7)
To
B8
(A8)
To
F25
(A9)
To
C11
,D15
,E11
(A10
) To
D11
(A11
) To
D2
(A12
) To
B3
(A13
) To
B2
(A15) To F17(A16) To F18(A17) To B1,F19
(A18) To F8(A19) To F10
(A20) To F12(A21) To F11
(A22) To F13(A23) To F15(A24) To F14
(A25) To F22(A26) To F20(A27) To F21
(A28) To F4
(A29) To E5
(A30) To F26
(A31) To F3(A32) To F2
(A14) To F16
To E
3(A
33)
(A34
)
(A35
)To
D8(
A36
)
To E
1(A
37)
To E
2(A
38)
To E
7(A
39)
To E
10
To D
10
To E
8(A
40)
To D
5(A
41)
To D
7(A
42)
To D
1(A
43)
To D
4(A
45)
(A44
)
To D
6(A
46)
TO C
2
To B
13,C
10
To E
12
To F
24
To F
23 (A
51)
To F
25 (A
52)
To E
9
To
C15
To C
13
(A57
)
To B7 (A58)
To F28 (A59)
To F29(A60)
To F27(A61)
SECAM L-LTo E6 (A62)
(A63)
(A64)To D16
To D17
To B
9
(A55
)
(A54
)
(A53
)
(A50
)
(A49
)
(A48
)
(A47
)
To B
14,B
4,C
8,D
14,E
13,F
6
To D
3
To CN905(Block F)
To CN701(C Board)
XX XX
XX
XX
To Top Switch
NVM
PROTECTION
PROTECTION
PROTECTIONIC RECEIVER
3.3V POWER SUPPLY5V POWER SUPPLY
1.8V DETECT
1.8V DETECT
RESET
ESD PROTECT DIODE
CLAMPING DIODE
CLAMPING DIODE
R LED SW
G LED SW
LED
R-MUTEG-MUTE
B-MUTE
RGB-MUTE(SPOT)
PROTECTION
PROTECTION
VM BUFFER
PROTECTION PROTECTION
PROTECTION
PROTECTION
PROTECTION
SYSTEM CONTROLLER, VIDEO PROCESSOR, AUDIO PROCESSOR
GEOMETRIC CORRECTION
ABL
ABL
ABL BUFFER
SLICER
OCP
PROTECTION
PR
OTE
CTI
ON
PROTECT
PROTECT
RELAY
PR
OT
12
3
4
56
7
8
9
TV-L
TV-R
V IN
U IN
Y IN
B
G
R
Y-O
UT
V-O
UT
U-O
UT
Y-IN
U-IN
V-IN
3.3V 9V
5V
5V
5V5V
3.3V
3.3V
3.3V
3.3V
3.3V
5V
RN-CP
PLLIF (A65) To E18
C3250.02225V
:CHIP
C3280.0125V
:CHIP
D075UDZSTE-179.1B
D076UDZSTE-179.1B
A
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
B
C
D
E
F
G
H
I
J
KV-21CL5KRM-W100
KV-21CL5KRM-W100
4-3-2. A Board – Audio (Block B)
– 32 –– 31 –
MSB709-RT1Q202
CHIP15kR214
RN-CP1k
R221MMDL914T1
D205
10kR216
MMDL914T1D201
MMDL914T1D204
MMDL914T1D203
MMDL914T1D202
15kR213
16V220C219
CHIP0
R220MSB709-RT1Q201
D206XX
C221XX25V
0.1B:CHIP
C213 22C218
XX C229
CHIPXX
R230
CHIPXX
R229CHIP
CHIP
XX R222
Q204XX
CHIPXX
R223
CHIPXX
R224
CHIPXX
R226
Q205XX
XX C225
CHIPXX
R225
16VXX
F
C226
16VXX
F
C227
1 2 3
WHT
CN201XX
3D O
UT+
GN
DG
ND
/3D
OU
T-
D207XX
MMDL914T1D208
XX C223
25V1000
C217
C212XX
2200100C210
PT0.047C232
PTXX
C230
CHIPXX
R232 UN2211
Q20010k
R215
CHIP0
R212
1 2 3
WHTXX
CN202
SP GN
DG
ND
D209XX
D210XX
100
R238
To
A2,B
14,C
8,D
14,E
13,F
6 (B
4)
9V
To F
5 (B
5)
MO
N-M
UTE
-AU
DIO
LSL-
AUD
IO (B
2) T
o A1
3
LSR
-AU
DIO
(B3)
To
A12
To A
57 (B
9)
AUD
IO-M
UTE
To A
58 (B
7)
AUD
IO-S
TDBY
To A
7 (B
8)
MO
MU
TE-A
UD
IO
To A
1 (B
6)
PWR
-OFF
-MU
TE
To
A2,B
4,C
8,D
14,E
13,F
6 (B
14)
9V
SCAR
THPL
(B1)
25V1000
C214
22C216
PT0.047
C231
RN-CP
100RN-CP
XXR237
CHIPXX
JR1256470p:CHIP
470p:CHIP
C234
C235
CHIP
R239
C215
10k R236
81 2 3 4 9765 10 11 12
IC200AN5276T
OU
TC/N
C
IN R
/NC
RF
S_G
ND
IN L
IN C
/NC
OU
TL
MU
TE
PW_G
ND
VCC
STBY
OU
TR/N
C
1.1uH FB2607
XX FB2602
5APS2601
500V470p
B
C2631
1000C2636
35V1000C2648
To C
4 (B
12)
AU
DIO
_1To
C5
(B11
) A
UD
IO_2
To C
6 (B
10)
AU
DIO
_GN
D
CHIP0
R218
S3L20UF4 D2625
330R219
16VXX
F
C224
XX C228
CHIPXX
R227
CHIPXX
R228
FPRDXX
R2645
FPRD1
R2646
4.7 C211
C236
J201XX
27 351 49 68
1PS226-115D211
D2626XX
0.47 0.01
6.8K0.1
0.4715K
15KXX
0.047
C205
:RN-CP3.3K
:RN-CP3.3K
:RN-CP:RN-CP3.3K
:RN-CP
:RN-CP
:RN-CP
:RN-CP
:RN-CP3.3K
R201
CHIP
6.8K
5.6K
0.10.01
R207
CHIPR208
R200
:RN-CP
R202
R211
C200
C201
0.22
5.6KXX
1PS226-115D200
10uHL2601
1 2 3 4
WHT
CN2004P
SP L
GN
DG
ND
SP R
0.047 C202
C203
25V
C208
J202XX
23 1 4
C209
C237
R203
R205
R204
R210
CHIPXX
R240330
R217
J200JACK
1 23 4 5 67
47R235
R233XX
47 R234
FPRD
C204
PT
C206
C207
C22010
RN-CPRN-CP
RN-CP
RN-CP
RN-CP
RN-CP
2.2kR241
2.2kR242 MMDL914T1
MMDL914T1
D212MMDL914T1
D213
To A
48,C
10 (B
13)
1.8V
_AU
DIO
FPRD10k
R2647
W040W041
UN2211Q206RN-CP
XXR801616V
XX
F
C2649
D214
AUDIO(BLOCK B)A
B-BX1s11705-OIRT-A..(BLOCK B)-21CL5K
To A
17,F
19
To Speaker To Speaker
PROTECTAUDIO AMP
MIXER
MIXER
AC MUTE
9V
9V 9V
C2602470P
B:CHIP
C2601XX
16VCHIP
0.2216V
CHIP16V
16V25V
PT
!
A
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
B
C
D
E
F
G
H
I
J
KV-21CL5KRM-W100
KV-21CL5KRM-W100
4-3-3. A Board – Power Supply (Block C)
– 34 –– 33 –
12
2PCN602
AC INAC IN
MSD601-RT1Q601
CHIP10k
R602
CHIP10k
R609
S600
XX R618
RN-CPXX
R623XX
D615
470pCH
C644
D1NL20UD618
RN-CP150kR645
RN-CP1.5kR646
4.7C621
CHIP1k
R647
MSD601-RT1Q608
MSD601-RT1Q609
4.7kR631 100V
XXC646
XXR640
RU4AM-T3D621
500V470p
B
C654470C635
500V470p
B
C653
VCCGND
OUT
BA033TIC606
16V100C641
5APS602
500V470p
B
C626
16V470
C647
G
TA7805S
IC604
16V100C638
16V100C639
1.1uHFB603
25V470C634
XX D614
XX 1000C650
500V4700p
E
C605
500V4700p
E
C606
500V4700p
E
C609
500V4700p
E
C610
RD5.1ESB2D629
MMDL914T1D600
CHIP0
R625
JW16535.0MM
2.2kR636
XXFB601
220pCH
C616
220R621 XX
R633
12
2PCN601
DGCDGC
0uHFB608
JW1603XX
JW1604XXJW1605
XX
JW1611
To A54 (C15) DGC-RELAY
+B (C11) To A9,D15,E11
3.3V (C1) To A3,D18
11V (C7) To C16,D13
5V (C9) To A4,D12,E16,F1
9V (C8) To A2,B4,B14,D14,E13,F6
To C7,D13 (C16) 11V
FH601 FH602
275VPP
0.22C660
25VXX
B
C661
1/2WFPRD
XXR653
XXJW1654
W001W002
JW1660XX
JW1661XX
PQ018EF01SZHIC603
I O I OG
PQ09RDISJ00H
IC602
D3SB60F3D604
VDR600
2200pB
C623
To
Hea
t Sin
k IC
601
(C
14)
HS
-A00
7
AUDIO_1 (C4) To B12AUDIO_2 (C5) To B11AUDIO_GND (C6) To B10
PP
0.1C666
RY600
16V100C649
35V3300C630
5APS603
16V0.1
B
C662
CHIPXX
JR1601
1.8V_MAIN (C2) To A47
1.8V_AUDIO (C10) To A48,B1322uHL602
16V100C668
CHIP100
R655
275V275V
275V
XXC669
1R656
XXJW1632
1 2
PP
0.1C602
RD5.1ESB2 D605
XXJW1662
XXJW1663
THP600
FH603250V4700p
E
C600
PT0.047C619
35V2200C632
MTZJ-T-77-15D633
S3L20UF4D624
7
31 6
17
12
14
13
181
15
8
10
11
5
9
T602
D620
D639
XX
D3S6M-F
500V470p
B
C652
5APS604
17.5MMJW1665
CHIPXX
R654
XXR665
XXR666
CHIP33k
R668
XXR669
250V5A
F600XX
JW1630
XXJW1631
XXJW1633
AM01AV1D602
AM01AV1D603
W018
FB605XX
160V330C665
XXFB610
250V330p
B
C657 TP601
FN155 Q605
250V330p
B
C670
2WRS
XXR651
11EQS10-TB5D622
HOLD_DOWN (C12) To D9
JW1602XX STBY_SW (C13) To A55
PDZ3.6B-115D635
25V0.01
B
C672
W024
47uHL600
47uHL601
RNXX
R660
RNXX
R661
250V330p
B
C625
250V2200pC622
E
2WRS
0.33R620
2WRS
0.33 R619
XXC673
XXB
C674
XX
220
C675
1W8.2MR650
RN
CHIP4.7kR634
450V220
C611
XXR672
CHIP
CHIP10k
R635
16V2.2
F
C678XX
C679
D636XX
12
2PCN603
DGCTDGCT
XXJR1602
XXR675
RN560kR658
RN2.2kR612
2.2R627
RN2.2kR624
47C624
1.5kVMPS
680pC612
2kV1500pC628
RRN680kR659
470pCH
C680
5.0MM
5.0MM5.0MM
JW1666
JW1667
5APS605
MA2ZD14001S0D637
5JW1092
5JW1091
5JW1088
JW1089XX
5JW1090
CHIP1k
R667
16V100C637
C682
MMDL914T1D638
14
T604XX
14 T605
XX
10ERB20-TA2B5D617
10ERB20-TA2B5D619
10ERB20-TB3D623
0.47C643
B
VCCGND
OUT
BA18BC0FP-E2IC607
14
T600
14
T603
C685
COG
SE135N-LF38IC605
PC123Y22JOOFPH600
STR-F6267S LF1357IC601
1.5R616
1.5R639
SP
AR
K G
AP
SP
AR
K G
AP
SP
AR
K G
AP
SP
AR
K G
AP
3
3
3 3
2
2
2 2
1 2 3 4 51 2 3 4
POWER SUPPLY (BLOCK C)A
PROTECTRELAY SW
REG
PROTECTION
RECTIFY
RECTIFY
BUFFER
AC RECT
REG
REG
RECTRECT
SWITCHING REG
20V RECT
20V RECT
11V RECT
+B RECT
PHOTO COUPLERSW
REG
ERROR-AMP
18 V REG
5V REG
9V REG
1.8V REG
ESD PROTECT
3.3V REG
16V
B-BX1s11705-OIRT-A..(BLOCK C)-21CL5K
RELAY,AC POWER
THERMISTOR,POSITIVE
LFC LFC
VARISTOR
To DGC
To AC Power
10V
16V
CONVERTER TRANSFORMER(SRT)
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
A
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
B
C
D
E
F
G
H
I
J
KV-21CL5KRM-W100
KV-21CL5KRM-W100
4-3-4. A Board – Deflection (Bloc k D)
– 36 –– 35 –
XXC817
2.2kR846
CHIP0
R843
CHIP0
R423
10kR847
1kR851
RN-CP10k
R8522.2kR861
150kR424
18kR854
3.3kR853
1kR865
33kR859
100kR866
10kR856
5.6kR864
CHIP0
R872
RN-CP RN-CPRN-CP
47kR873
2200pB
C839
MSB709-RT1Q807
MSD601-RT1Q806
FPRD10
R868
1R869
UD
ZS
-TE
17-9
.1B
D81
5 S
IRF614-037Q808
BY228/A52A/D816
EG
P20
GD
817
S800
4.7mHL803
35V220C855
MPS0.47C858
GP08DD820
35V100C854
2.2R891
1/2WFPRD
0.47R400
500V1000p
B
C860
D824
25V220
C857
1/2WFPRD
0.47R401
EL1Z
EL1Z
D823
500V1000p
B
C862
25V220
C861
CHIP22k
R887
10kR421
4.7kR420
1000pB:CHIP
C845
16V100C828
6.8kR844
CHIP0
R839
27kR838
1/2W0.47R405
1/2W150kR833
4.7kR831
16V100C811
RN-CP33k
R824
1000pB:CHIP
C809
5mmJW1837
1 2
1.1uHFB800
500V1000p
B
C810
500V220p
B
C808
1/2W2.2kR830
2SC3209LKQ803
1000pB:CHIP
C807
22kR821 1
C805
4700pC837
10k R803
4.7 C800
CHIP0
R80635V47
C80322k
R805
10k R810
CHIP0
R816
22k R815
10k R817
MMDL914T1 D801
22k R813
22k R812
10k R818
EL1ZD827
500V470p
B
C868
1/2W4.7k
R414
250V33
C869
2.2mHL805
C859
XX C872CHIP
R884
CHIPXX XX
XX
XX
XX
XX XX XX
XX
XX
R886
C853
C856
CHIP
R892
XX Q810
CHIP
R403
CHIP
R408
10 C804
160V33
C867
330kR826
1WRS
220R871
123456
6PDY800
H+
H+
H-
H-
V-
V+
1SS133T-77D804
1SS133T-77D805
220pCH
C832
25V0.022
B
C826 16V0.1
C833XX XX
C818 16V0.1
B:CHIP
B:CHIP
C831
16V0.047
B
C844
C821
25V0.01
B
C82225V0.01
B
C825
25V0.01
B
C830
25V0.01
B
C835
XXC812
16VB
XXC813
16VB
XXC815
16VB
XXC829
16VB
XXC834
16VB
D812XX
XXR841
CHIP
XXR842
CHIPXX
R845
CHIP
XXR848
CHIP
XX33K R857
CHIP
XXR858
CHIP
XXR402
2WRS
1/2WRN
68k R411
XX R419
RN
10kR876
XXC816
XXC864
500VB
XXC865
PT
MMDL914T1 D800
8 7 6 5
4321
NJM4556ADIC800
47kR888
CHIP0
R8012.2k
R800
100 R814 1SS133T-77
D807
1SS133T-77D809
1SS133T-77D808
MSD601-RT1 Q800
MSD601-RT1 Q801
MSD601-RT1 Q802
XX Q809
MSD601-RT1Q814
12345
WHT5P
CN801XX
200VNCGNDH1NC
1/2W220kR406
7.5mmJW1834
XXL804
12
FPRDXX
R840
CHIPXX
R425
To A4,C9,E16,F1 (D12) 5V
To C7,C16 (D13) 11V
(D14) 9VTo A9,C11,E11 (D15) +B
To A
10 (
D11
) H
OU
T-D
EF
L
VD
--D
EF
L (D
7) T
o A
42
VD
+-D
EF
L (D
5) T
o A
41
AB
L (D
4) T
o A
45V
GU
AR
D-D
EF
L (D
3) T
o A
44
AF
C-D
EF
L (D
2) T
o A
11
EW
D-D
EF
L (D
1) T
o A
43
-13V
-DE
FL
(D6)
To
A46
3WRS
1k R829
100 R8003
To A63 (D16) ROT_CTRL
RN-CP
RN-CP
RN-CP
RN-CP
RN-CP RN-CP
RN-CP
RN-CP
RN-CP RN-CP
RN-CP
RN-CP
RN-CPRN-CP
RN-CP
RN-CP
RN-CP100
R8004
To A64 (D17) ROT_SWTo A3,C1 (D18) 3.3V
XXR8007
XXR8008
CHIP
R8000
CHIP
R800125VXX
B
C874
XX Q816
CHIPXX
R8002
OVP-DEFL (D8) To A36
MMDL914T1D830
XXCH
C875
RN-CP
RN-CP
47k R8011
47k R8012
CHIP2.2k
R88212.5mmJW1839
HOLD_DOWN (D9) To C12
OCP-PROTECT (D10) To A35
1WRS
XXR422
XXXX
XX
D828
L800
CHIP0
R804
2WRS
1 R827
2SC5885Q805
1 2 3 4 5 6 7
STV9302AIC804
DR
V-I
N
VC
C (
+13
V)
F.B
-PLS
VS
S (
-13V
)
OU
TP
UT
VC
C (
OU
T)
RE
F-V
OLT
2SC3209LK Q8010
RN-CP6.8k
R8009
1WRS
1R878
C866
FPRD1K
R822
16V0.047
B
C863
1/2W150k
R835
CHIPXX
R898
CHIPXX
XX
XXXX
R8014
1/2W4.7kR416
22mHL802
87
654
32
1
TJM4558CDTIC802
RN-CPXX
R8015
TH
800
XX
UDZSTE-175.6BD829
200VPT
0.022C806
200VPT
0.01C848
200VPT
0.022C849
XX D826
400VPP
0.15 C841
250VPP
0.33 C852
100VPT
0.1C838
100VPT
0.1C850
2kV330pC846
10ERB20-TB3D819
10ERB20-TB3D821
400VPP
0.022 C842
2SA1091-0Q804
2SA1091-0 Q8009
3WRS
1k R825
3WRS
1k R828
XX D831
RN-CP10k
R893
CHIP10k
R881
3.3kR895
RN-CP
RN-CP
RN-CP RN-CP
RN-CP
RN-CPRN-CP
RN-CP
RN-CPRN-CP
RN-CP
RN-CP
3.3kR870
8 7 6 5
4321
LM2903DTIC801
W019
5MM
JW18
40 7.5M
MJW
1841
10mmJW1842
XX R896
10uH L806
1000pC876
1000pB:CHIP
B:CHIPB:CHIP
C877
1000pC878
1000pB
C879
W025
W026
XX C836
RN
R897
R894
RN-CP
RN-CP
R899
1.2kV0.013 C840
PP
120k R8010
RN100k
R8013
RN
RN180kR823
RN180kR834
220kR879
220kR880
RN
R417
100kR877
C8700.068
200VPT
0.01C847
FV
11
13
HV
2
SV
4
1
10
9
8
7
5
6
T801
123
3P CN800
RED
NS-NCNS+
8 7 6 5
4321
XX IC803
10k R802
680 R807
10k R808
10k R809
10k R8005
2.2kR820
3WRS68
R890
2.2kR883
450V1
C851
4
2
1
3 6
T800
RD5.1ESB2D818
RN22k
R413
3WRS
100R889
CHIP
R855
XX C882
RN33k
R412
To NS COIL
ADEFLECTION (BLOCK D)
B-BX1s11705-OIRT-A..-(BLOCK D)-21CL5K
200V:PT
CHL
H.DY H.DY V.DY V.DY
!
To A2,B14,B4,C8,E13,F6
To DY
To CN703(C Board)
PIN DRIVE
BUFFERBUFFER
STOPPER
STOPPER
ROTATION AMP
STOPPER
STOPPER
STOPPER
STOPPER
COMPARATOR
H-DRIVE
PROTECT
H-OUT
PIN AMP
PR
OT
EC
T
PIN-DRIVE
PIN-DRIVE
STOPPER
PROTECTOR
CLAMP
V-OUT
V-DRIVE
H-CENT 1
STOPPER
SWITCH
BUFFER
MIXER
MIXER
SWITCH
CLAMPER
H-OUT
H-CENT1
RECT
CLAMPER
10
11
12
13
14
15
3.3V
3.3V
9V
11V
9V
5V
5V
5V
5V
9V
11V
11V
11V
200V
HDT
NX-4751//M3A4
RN-CP
RN-CP
RN-CP
RN-CP
RN-CP
RN-CP
RN-CP
RN-CP RN-CP
RN-CP
RN-CP
!
!
A
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
B
C
D
E
F
G
H
I
J
KV-21CL5KRM-W100
KV-21CL5KRM-W100
4-3-5. A Board – Tuner (Block E)
– 38 –– 37 –
D102XX
B
C116
22C118
UPC574JD103
4700pB
C109
16V470
C107CHIPXX
R118
CHIPXX
R100
CHIP100
R115
CHIP100
R116
1000pB
C100
C129XX16VB
XXR104
CHIP
XXR141
CHIP BPFG
I O
CF100XX
1 2
3
JR11010
CHIP25VXX
B
C111XX
L102Q102XX
CHIPXX
R106
CHIPXXR107
XXB
C115
XXL101
CHIPXX
R110
XXL103
Q100
CHIP
JR1100
16V470
C108
To A
37 (
E1)
SIF
IN2-
IF
To A
38 (
E2)
SIF
IN1-
IF
To A
62 (
E6)
S
EC
AM
-L-L
To A
39 (
E7)
V
IFIN
2-IF
To A
40 (
E8)
V
IFIN
1-IF
To
A53
(E
9)
M-S
YS
-IF
To
A34
(E
10)
TU
AG
C-I
FTo
A9,
C11
,D15
(E
11)
+B
To
A2,
B14
,B4,
C8,
D14
,F6
(E13
) 9
V
To A
5 (E
14)
SD
A-0
To A
6 (E
15)
SC
L-0
To A
4,C
9,D
12,F
1 (E
16)
5V
To A
33 (
E3)
2S
IF
To A
49 (
E12
) A
GC
-MU
TE
To A
29 (
E5)
IF
VO
/IF_M
ON
_OU
T
CT139XX
0 0
3WRS
22kR121
RN-CP100
R150
To F
7 (E
4)
IFV
O
CHIPXX
R151
CHIPXX
0JR1109
1
TP101XX
CHIP0
JR1110
RN-CPXX
4700
0
1PS184-115
R108
CHIPXX
R109 XXCH
C117 XXR126
CHIP
XX 2.2K
2.2K
0.47UH2.2K
UN2216
390
UN2216L105
RN-CPXX
R119
SWF101
12
34
5
SWF102
12
34
5
XX R123
CHIP
I
GG
O
O SWF100
AG
C
AS
CLO
CK
DAT
A
5V 33V
IF O
UT
TU101
16V470C120
XXC106 L100
0.01B:CHIP
C119
To F30 (E17) TU-AGC
C101
CHIP
R152
47uHL106
MMDL914T1XX
7.5K 100uH
2.2K100
D107
CHIP
JR1108
47pCH
C10247pCH
C104
25V0.01
B
C112D101
L104
Q105
Q106
CHIP
R122
100CHIP
R130
CHIP
R124
CHIP
R125
CHIP
R128
CHIP
R142
CHIP
JR1107
R088
CHIP
1000pB B
C1361000pB
C137
UDZSTE-175.6BD108
UDZSTE-175.6BD109
XX C1233
25V0.01
B
C139
W045
W046
ATUNER (BLOCK E)
FSS BTP-AC421
FILTER SURFACE WAVE FILTER SURFACE WAVE XX
B-BX1s11705-OIRT-A..(BLOCK E)-21CL5K
REGULATORBUFFER
SWITCH
FILTER
SWITCH
DIODE
AMP
SELECTOR
DIODE
5V
9V
33V
9V
9V
C0700.116V
To A
65 (
E18
) P
LLIF
A
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
B
C
D
E
F
G
H
I
J
KV-21CL5KRM-W100
KV-21CL5KRM-W100
4-3-6. A Board – Jac k, Scar t Terminal (Bloc k F)
– 40 –– 39 –
D912
D90316V
1
16V1
C908
RN-CP75
R922
C9520.116V
UDZSTE-175.6BD904
25VXXC921
470pCHIP
C940
C919
75R930
D916
UDZSTE-175.6B
UDZSTE-175.6B
UDZSTE-175.6B
D913
UDZS-TE179.1BD928
75R928
UN2216Q909
CHIP
R9005
75R929
D917XX
XX
D911
RN-CP
RN-CP
220kR921
RN-CP
RN-CP
470kR967
UN2216Q908
C947
CHIP
R941
XX
RN-CP39k
R908
470R993
(F25) D1_JP/MODE2_EU/MONSW-MONO
To 2
7 (F
21)
INL2
To A
26 (
F20
) IN
R2
To A
14 (
F16
) S
CA
RT
FB
L/A
16
To A
25 (
F22
) C
VB
S2/
Y2
To
A18
(F
8) C
1
MO
N-M
UT
E-A
UD
IO (
F5)
To
B5
To A
23 (
F15
) IN
R3
To E
4 (F
7) IF
VO
MO
N-O
UT
(F
4) T
o A
28O
UT
R (
F3)
To
A31
5V (
F1)
To
A4,
C9,
D12
,E16
9V (
F6)
To
A2,
B4,
B14
,C13
,D14
,E13
B-Y/BIN
To A
20 (
F12
) IN
R1
To A
17,B
1 (F
19)
SC
AR
TH
PL
To A
16 (
F18
) S
CA
RT
HP
R
To A
21 (
F11
) IN
L1
R-Y/RIN
TO
A19
(F
10)
CV
BS
1/Y
1
OU
TL
(F2)
To
A32
To A
22 (
F13
) C
VB
S3
Y/GIN
To A
24 (
F14
) IN
L3
100
100 100
R9021
RN-CP
RN-CP
100R9023
To A
15 (
F17
) C
VB
SO
To A
51 (
F9)
S1/
VC
CHIPXX
R9038
CHIP
R9039
To A30 (F26) MONO_OUTL
100R9035
RN-CP
RN-CP
100R9034
To A50 (F24) D1_JP/MODE1_EU
C953
Q912
CHIPXX
XX
XXXX
XX
XX
XX
XX
XX
XX
XX
XX
R9040
CHIP
R9041
CHIP
R9042
CHIP
R9043
CHIP
R9045
CHIP
R9046
CHIP
CHIP
R9047
D920UDZSTE-175.6B
UDZSTE-175.6B
D927UDZSTE-175.6B
Q903MSB709-RT1
R94733k
RN-CP
R94910k
RN-CP
R9541k
RN-CP
RN-CP
RN-CP
RN-CP
R95775
RN-CP
L9013.9uH
JR1901
CHIP
L
R
V
J9033P
XX
0
0
XX
220K
10K
UDZSTE-175.6B470P
16V470
C903
C905
C906
C907
C909
CHIP
C910
CHIP
C911
CHIP
C922
CHIP
C925
CHIP
C939470P
CHIP
C946
D900
D901
D905
UDZSTE-175.6B
UDZSTE-175.6B
UDZSTE-175.6B
UDZSTE-175.6B
UDZSTE-175.6B
UDZSTE-175.6B
39K
D902
D906
D907
D908 1 0.22 47 75
D910 0.01
220
75
D922
UDZSTE-175.6BD934
D923XX
D929
0uHFB901
JR1902
CHIP
Q900
Q901 Q902
CHIP
R902
CHIP
R904
CHIP
R905
CHIPCHIP
R906
CHIP
R910
CHIP
R907
CHIP39K
39K
R909
CHIP
R913
CHIP
R914
CHIP470KR924
CHIP220K
220K
R915
CHIP
R916
CHIP
CHIP
CHIP
220K
XX
XX
XX
R920
CHIP
CHIP
R923
CHIP
R917
CHIP
R919
CHIP
CHIPR932
CHIP
R933
R94833K
CHIP
CHIP
R970CHIPCHIP
R992
CHIP
27K
R9014
CHIP
R9016
CHIP100
100
100R9017
CHIP
R9018
CHIP
R9019
CHIP
R9020
CHIP
R9022
CHIP
R9028
CHIP
R9030
CHIP100
100
100
470P
UDZSTE-179.1B
470P
470P
470
470K 470P
XX
1K 1K
UDZSTE-179.1B
UDZSTE-179.1B
UDZSTE-179.1B
MSB709-RT1
UN2216
4.7 470K
470K
UN2216
470P
XX
470P
XX470
470
XX
R9031
R95010KCHIP A1
A2A3
A6A7A8
A11
A15
A16
A19
A20
B1
A2
B2
B3
B1
A2
B2
B3
A6
B6
A7
A6
B6
A7
A8 A8
B8 B8
A11 A11
A19
B19
A20 A20
B19
A19
A16
B15
A15
B20 B20
A1 A1 A1
B1
A2
B2
A3
B3
A4
A5
A6
B4
B5
B6
A7
B7
A8
B8
A9
B9A10
B10
A11
B11
A12
B12
A13
B13
A14
B14
A15
B15
A16
B16
A17
B17
A18
B18
A19
B19
A20
B20
A21
B21
CN901CONNECTOR,DUAL SCART
R OUT 1
R IN 3
L OUT 1
GND
GND
L IN 3
BY
MODE 1
GND
AVL
Y
NC
GND
GND
RY
BLK
GND
GND
V OUT TV
V IN 3
GND
R OUT 2
R IN 1
L OUT 2
GND
GND
L IN 1
NC
MODE 2
GND
AVL
NC
NC
GND
GND
C2 IN
NC
GND
GND
V OUT MON
V IN 1
GND
A3 A3
B15
A16
A15
To A60 (F29) B_INTTo A59 (F28) B_DATTo A61 (F27) B_CLK
A21
B21 B21
A21
A21
CHIP68
R931
F1
F3
F4
F2F1F2
F3
F4
CHIP
R9050
CHIP
R9051
CHIP
R905216V
1C918
UDZSTE-175.6BD915CHIP
220kR940
V
J909
F2
F3
UDZSTE-175.6BD918
75R9053
XXJW1901
CHIP
R943
CHIP
R9044
123456789
101112131415161718192021
XXCN902
R OUT 1R IN 3L OUT 1GNDGNDL IN 3BYMODE 1GNDAVLYNCGNDGNDRYBLKGNDGNDV OUT TVV IN 3GND
CHIP0
JR1903To E17 (F30)TU-AGC
CHIP
CHIP
XXR9056
16V100
C956
100R9025
Q911
Q910
C902
0.22C904
16V0.22C955
:CHIP
47uHL902
CHIPXX
JR1905
12345
WHT5P
CN904
GN
DB
CLK
B D
ATB
INT
AG
C
D921XX
1uHL903
1uHL904
1uH
1uH
FB902
FB903
RN-CP100
R925
RN-CP
RN-CP
RN-CP
RN-CP
100R926
RN-CP100
R927
16V0.1
C060
B
16V0.1
C062
B
16V0.1
C067
B
12345
YELXX
CN905
Y OUTGND
U OUT / FBGND
V OUT
Y/GIN
R-Y/RIN
B-Y/BIN
XXCH
C958XXCH
C959
XXCH
C960
XXCH
C961XXCH
C962
XXCH
C963
XXCH
C964
XXCH
C965
1uHL905
1uHL906
16V2.2
C967
CHIPCHIP
R911
47R918
RN-CP10kR945
CHIPCHIP
16V1
CHIP
R946
27kR9027
CHIP
R9026
1000pB
C972
XXCH
C968
XXCH
C969
XXCH
C970
XXCH
C971
W028
10
10
C973
C974
C915
C900
C901
C912
XX
XX
C913
C914
CHIP
C916
W035
0.001:CHIP
C975
To A
52 (
F23
) S
2
RN-CP
RN-CP
RN-CP RN-CP
100R9037
UDZSTE-175.6BD930
330pCHIP
C917
0.0039C061
RN-CP100
R9057
CHIP0
R9036
1kR9062
UN2211Q913W016
W017
W047W048
RN-CP100
100
100
R9013
L90010uH
R953470k
R95168
R9521k
C92347
35V
16V470
C976
XXJR1906
R2
L2
VIDEO 2
VIDEO IN 2
L
To A8
AJACK (BLOCK F)
B-BX1s11705-OIRT-A..(BLOCK F)-21CL5K
To Bus Connector
5V
9V
AMP
AMP GAIN ADJUST
AUDIO MONO BUFFER
PROTECT
PROTECTION
PROTECTION
PROTECTION
PROTECT
SWITCHINGTRANSISTORMONITOR OUT BUFFER
PROTECTION
PROTECTION
PROTECTION
PROTECTION
PROTECTION
PROTECTION
PROTECTION
PROTECT
PROTECT
PROTECTION
PROTECTION
AUDIO MUTEPROTECT
PROTECT
PROTECT
10V
CHIP
4.710V
25V
16V
1
CHIP16V
D931UDZSTE-173.6B
D932UDZSTE-173.6B
D933UDZS-TE17-9.1B
– 41 –
KV-21C
L5KR
M-W
100
4-3-7.C
Board S
chematic D
iagram
A
12
34
56
7
BCDEFGHIJ
2kV4700p
E
C752
1000pB
C782
1
1PCN705
GND
1SS133T-77
1SS133T-77
D780
D781
L750XX
22uHL780
Q701XX
CHIPXX
R775
CHIPXX
R777
R766XX
R767XX
R768XX
R784XX
R785XX
R786XX
UDZSTE-175.6BD782
CHIP
CHIP
XXR776
CHIPXX
R778
250V4.7
C754
JW702XX
C759XXCH
12345
WHT5P
CN703
200VNCGNDH1NC
34
56
78910
11
131
GND
GND
1
J751
110MRV750
R760
1/2W100R763
1/2W100R764
1/2W100R765
1/2W560kR773
1/2W1k
R756 1/2W1k
R757
1/2W1k
R758
D756
D755
HSS82-TJHSS82-TJ
HSS82-TJ
D754
R7741503WRS
1/2W100R783
R7130
C7831000p
B
1
CN7041P
1000V
98765431 2
TDA6108A IC751
B IN
G IN
R IN GN
D
IK VD
D
R O
UT
G O
UT
B O
UT
0.47R794
GP08DD750
1/2W470kR780
1/2WFPRD
100kR795
1234567
7PCN701
WHT
GNDBGR
GND1K9V
1000pB
C786
XXC753
500V1000pC787
RS
R7810.56
JW1781XX JW1782
XX
JW1783XX
RN-CP680
R752
RN-CP680
R753RN-CP CHIP680
R754
250V10
C751
250V4.7
C781
47p C788
47p C790
47p C789
33uHL781
33uHL782
33uHL783
R-OUT
FV
RC
V
B-BX1s11705-OIRT-C..21CL5K
SOCKET CRT
CH:CHIP
CH:CHIP
H
KG G2
CV KR G1 G4HV
KBPICTURE
TUBE
CRGB AMP
To A BoardCN004
To A Board(Block D)CN801
To G2
To Earth Coating Assy
RGB-OUT
IK-BUFFER
PROT
PROT
PROT
PROT
!
21
3 4 5
6
*
:RN:RN
:RN
A51LPT60X
!
TAB,CONTACT
TAB, CONTACT
– 42 –
KV-21CL5KRM-W100
Ref Pin No. Voltage[v]IC001 1 0.01
2 0.013 0.034 3.35 3.36 0.017 3.38 09 3.310 –11 –12 1013 0.1714 2.515 4.916 1.917 2.318 0.0119 2.320 2.321 4.3
1.08Vp-p
1
22 0.05
1.92Vp-p
2
23 0.01
2.04Vp-p
3
24 2.025 2.026 2.427 2.028 0.0529 0.0430 1.931 2.732 0.5533 0.0434 0.0435 2.236 3.137 3.138 0.0339 2.440 0.0141 2.042 1.943 2.344 0.0345 8.546 2.347 4.9
Ref Pin No. Voltage[v]Ref Pin No. Voltage[v]
A BOARD VOLTAGE LIST AND WAVEFORM
48 0.05
2.16Vp-p
4
49 2.250 2.251 1.452 1.653 2.254 2.255 1.456 2.257 2.258 1.459 1.660 3.261 3.262 3.463 3.564 1.365 3.466 0.5
5.44Vp-p
5
67 1.4
3.12Vp-p
6
68 069 4.970 1.371 1.372 1.373 2.074 1.875 0.1376 0.0177 0.0178 1.379 1.380 1.381 0.0382 4.983 2.984 3.285 1.6
1.60Vp-p
7
86 1.5
1.40Vp-p
8
87 1.6
1.40Vp-p
9
88 3.389 0.0190 3.391 0.0392 0.0193 0.0594 3.395 0.0196 1.797 1.598 3.699 3.6100 1.8101 0.01102 3.3103 0.73104 0.05105 2.7106 0.03107 3.3108 3.2109 3.6110 3.3111 0.64112 0.03113 0.04114 3.0115 0.03116 0117 0.02118 1.8119 1.8120 0.74121 0.01122 0.01123 3.3124 0.05125 0.01126 3.3127 3.4128 0.13
IC002 VCC 56.2G 55.6O 55.6
IC003 1 02 03 04 05 3.66 3.67 08 3.3
4-4. VOLTAGE MEASUREMENT AND WAVEFORM
– 43 –
KV-21CL5KRM-W100
A BOARD VOLTAGE LIST AND WAVEFORM
Ref Pin No. Voltage[v]Ref Pin No. Voltage[v]Ref Pin No. Voltage[v]IC200 1 0.01
2 (-0.01)[0]3 22.64 05 (-0.01)[0]6 (0.01)[0.02]7 11.28 0.89 010 23.811 10.412 11.1
IC601 1 0.562 0.053 286.64 19.35 2.88
IC602 I 14.2G -0.01O 8.9
IC604 I 8.9G -0.01O 4.9
IC800 1 3.82 7.13 7.14 -0.015 10.46 10.27 10.28 14.2
IC801 1 2.22 0.833 1.54 05 2.86 2.37 6.08 9.0
IC802 1 1.82 3.23 3.24 05 2.26 2.27 4.18 8.9
IC803 1 0.022 03 0.014 0.015 0.026 07 -0.018 0.01
IC804 1 0.43
568mV
15
2 13.63 -12.04 -13.55 0.16
51.2Vp-p
14
6 14.07 0.44
PH600 1 19.12 18.03 0.054 2.6
Q001 B 0.02C 0.02E 2.8
Q006 B 3.3C 2.1E 2.0
Q007 B 0.01C 3.3E 0.34
Q008 B -0.44C 0.02E 0
Q009 B 0C 2.2E 0
Q012 B 0.63C 0.03E 0
Q013 B 0.04C 1.8E 0
Q100 B 2.7C 8.9E 2.1
Q105 B 0.03C 4.1E 4.8
Q106 B 0.03C 4.8E 0.01
Q200 B 1.9C 0.07E -0.01
Q201 B 23.0C 24.0E 24.0
Q202 B 8.9C 0.66E 8.8
Q204 B 0C 8.9E 0.04
Q205 B 0.01C 0.02E 0.02
Q601 B 0.04C 14.2E 0
Q608 B 0.1C 15.5E 0
Q609 B 0.66C 0.01E 0
Q800 B 1.7C 8.9E 1.1
Q801 B 0.08C 11.0E 0.07
Q802 B 0.05C 10.4E 0
Q803 B 0.05
1.40Vp-p
12
C 55.4E 0.01
Q805 B -0.08C 135.4
328.0Vp-p
11
E 0.02Q806 B 6.0
C 8.9E 5.6
Q807 B 6.0C 0E 5.6
Q808 S 0.01
584mV
13
G 5.6D 6.1
Q814 B 0.04C 4.9E 0.22
Q900 B 1.3C 0E 2.0
Q901 B 0.24C 0.03E 0.01
Q902 B 0.24C 0.01E 0.01
Q903 B 4.3C 1.4E 4.9
Q908 B 0.24C 1.1E 0.02
Q909 B 0.25C 1.1E 0.01
Q910 B 0.01C 0.01E 0
Q912 B 0.37C 0.02E 0
Q8010 B 0.58C 0.12E 0.01
1.50Vp-p
10
– 44 –
KV-21CL5KRM-W100
C BOARD VOLTAGE LIST AND WAVEFORM
Ref Pin No. Voltage[v]Ref Pin No. Voltage[v]IC751 1 1.7
1.56Vp-p
1
2 1.6
1.66Vp-p
2
3 1.7
1.64Vp-p
3
4 05 4.26 197.7
7 139.2
108.0Vp-p
4
8 149.0
98.0Vp-p
5
9 138.4
98.0Vp-p
6
J751 5 06 08 138.29 150.010 140.0
KV-21CL5KRM-W100
KV-21CL5KRM-W100
NOTE:The circuit indicated at left contains high voltage of over1220 Vp-p. Please pay attention when inspecting orrepairing it to prevent an electric shock.
A [PROCESSOR, AUDIO, POWER SUPPLY, DEFLECTION, TUNER, JACK, SCART TERMINAL]
– 46 –– 45 –
PRINTED WIRING BOARDS
A BOARD
IC
IC001 C-6IC002 H-14IC003 A-5IC200 B-9IC601 J-8IC602 E-9IC603 E-11IC604 E-8IC605 I-6IC606 C-8IC607 E-12IC800 E-7IC801 E-5IC802 E-5IC803 G-6IC804 J-6PH600 I-7
TRANSISTOR
Q001 D-7Q006 E-13Q007 E-13Q008 F-7Q009 D-7Q010 D-3Q013 A-6Q016 B-8Q100 C-2Q102 A-3Q105 C-3Q106 C-4Q201 A-8Q202 C-8Q204 D-9Q205 D-9Q206 B-8Q601 D-12Q605 I-10Q608 H-7Q609 G-7Q800 E-8Q801 E-9Q802 E-9Q804 I-6Q805 G-1Q806 F-5Q807 F-5Q808 F-3Q809 F-6Q810 G-7Q814 D-8Q816 G-7Q900 C-3Q901 F-1Q902 F-1Q903 D-2Q908 F-1Q909 G-1Q910 C-2Q911 C-2Q912 C-2Q913 B-6Q8009 I-4Q8010 I-5
DIODE
D002 A-4D003 A-3D004 D-7D005 D-7D006 D-7D007 D-6D008 D-6D009 D-5D023 B-7D024 B-7D025 C-8D054 G-14D055 H-13D056 G-13D057 D-8D058 C-7D059 C-7D060 D-6D061 D-6D062 C-7D063 G-7D064 B-4D065 B-4D066 D-4D067 B-7D068 A-7D069 B-7D070 B-6D071 A-7D072 B-6D074 C-4D075 C-7D076 B-7D101 C-3D102 C-3D107 B-1D108 B-2D109 B-2D200 E-14D201 A-8D202 D-8D204 C-8D205 C-8D206 C-8D207 A-8D208 B-8D209 C-9D210 D-12D211 E-11D212 B-8D213 B-8D214 B-8D215 B-7D600 G-13D602 I-10D603 H-11D604 F-11D605 J-9D614 J-9D615 I-8D617 I-8D618 I-8D619 I-8D620 G-8D621 G-8
D622 F-9D623 G-9D624 G-8D625 F-9D629 H-7D633 I-9D635 D-8D636 J-9D637 E-11D638 E-11D639 G-8D641 J-9D800 E-8D801 E-8D805 G-6D807 E-6D808 H-5D809 F-4D812 E-4D815 F-3D816 G-3D817 F-2D818 I-6D819 F-4D820 J-5D821 F-4D823 J-4D824 J-3D826 G-5D827 I-4D828 I-5D829 E-4D830 I-6D831 F-6D900 D-3D901 C-1D902 E-2D903 E-2D904 D-2D905 C-1D906 E-2D907 E-2D908 D-2D910 D-2D911 D-3D912 D-2D913 D-3D914 G-13D915 D-13D916 D-13D917 D-13D918 D-5D920 E-3D921 E-2D922 E-2D923 E-2D927 D-1D928 F-1D929 F-1D930 D-2D931 D-14D932 D-13D933 C-1D934 C-2D2625 F-9
4-5. PRINTED WIRING BOARDS & PARTS LOCATION
R018
R400
R401
FB605
R402
R403 FB608
W030
R211
R405
W031
R212
R406
W032
R213
CN003
1
4
W033
CN0041
7
R214
R408
FB800
R020
W034
R215
PS2601
W035
R216
R217
CN007
1
5
R023
FB610
R218
R024
R219
R025
CN009
1
5
R602
R026
J903
CN200
14
CN201
13
R411
R029
CN202
3
R412
R413
R220
SWF100
R414
R221
R609
J909
SWF101
R222
SWF102
R416
R223
R417
R800
R224
R030
R801
R225
R419
W045
R802
R226
R803
R227
W048
R804
R228
W049
R805
R229
R806
R612
R807
R808
R420
R038
R9005
R809
R421
R039
R616
R422
R423
W050
R230
R424
R425
C001
R619
R232
C002
W053
R233
C003
W054 R810
R234
W055
C005
R235
R041
CN601
C006
R812
R042
R236
CN602
CN603
R813
R237
R814
C008
R044
R238
R620
R815
C009
R045
TU101
111
R239
R621
R816
R046
R817
R9013
R623
C200
R818
R048
R9014
R624
C201
R625
C202
R9016
C203
R9017
R627
1
3
CN800
C204
C010
R240
C205
CN8011
5
X001
R9019
C011
R241
C206
C012
R242
C207
C208
R820
C014
C209
R821
R051
R822
R823
R824
R9020
C018
R631
R9021
R825
R826
R056
R9022
R633
R9023
R827
C210
R634
R828
R058
C211
R829
R9025
TP101
R635
R059
C212
R636
R9026
C213
R9027
C214
C020
R9028
C215
R639
C021
C216
C022
C217
C023
C218
C024
R830
R060
C600
C219
C025
R831
R061
FH601
C026
FH602C602
R833
FH603
R640
R9030
C028
R834
R835
R9031
C029
C606
C220
R838
R9034
C221
C609
R9035
R839
R645
R9036
R646
R9037
C223
R647
C800
C224
R9038
C030
C225
R9039
C226
C032
C803
C227
C804
C228
C610
C034
TH800
R840
C229
R841
C805
C611
C806
C036
R842
C612
C037
C807
R843
R650
R9040
C038
C808
R844
R845
R9041
C809
R9042
R846
C616
R9043
R847
R653
C230
R654
R9044
R848
C231
R655
R9045
C619
C232
R656
R9046
R9047
C234
C810
R658
C811
C235
C041
R659
C236
C042
C812
C237
C813
C044
C815
R851
C621
R852
C046
C816
C622
R853
C623
R9050
R854
C048
S600
C624
C625
R9051
R855
C049
C626
R9052
R856 R087
R857
R9053
C628
R858
R088
R859
R665
R9056
R666
R667
R9057
C050
R668
C051
JW1611
R669
C822
C052
C053
C630
S800
C054
C825
C055
R861
C632
C056
C826
C057
C634
R864
C058
C828
C635
C829
R865
R9062
R866
R096
R672
C637
R097
C638
R098
R868
C639
R099
R869
R675
C830
C060
C831
C061
C062
C832
D002
D003
C063
C833
RY600
C834
R870
Q100
C064
D004
C641
C065
D005
C835
R871FB2602
D006
Q102
B
C
C836
R872
C643
C837
D007
C067
R873
JR1100
C838
D008
C068
C644
JR001
C839
C069
JR1101
Q105
D009
JR002
C646
R876
Q106
C647
JR003
R877
FB2607
D200
JR004
R878
DY800
KB004
EY201
D201
C649
R879
KB005
JR005
JR006
D202
KB006
JR1107
D204
JR1108
JR008
C840
C070
D205
JR1109
C071
JR009
C841
D206
C842
C072
D207
C073
JR200
D208
C650
C844
R880
D209
C845
R881
C652
C846
R882
C653
R883
C077
C847
C654
L100
C078
R884
C848
JR1110
C849
C079
L101
L102
R886
JR012
JR013
C657
R887
L103
D210
R888
JR014
L104
D211
R889
JR015
L105
L106
JR016
D212
JR017
D213
JR018
C850
C080
D214
C081
IC001
C851
JR019
C852
D023
IC003
C853
JW1837
D024
D600
C660
C854
R890
C084
D025
C661
R891
C855
C662
R892 C856
D602
R893
C857
D603
JR020
+D604
C858
R894
R895
C665
C089
C859
D605
R896
C666
R897
IC200
1
12
C668
JR600
R898
JR024
JR601L2601
R899
C669
JR025
JR026
JR602
JR027
D800
C860
C090
D801
C091
C861
C862
C092
JW1653
C863
C093
C094
C670
Q900
C864
JW1654
Q901
D805
C095
C865
C672
C866
Q902
C096
D807
Q903
C867
C097
C673
JR800
C098
C868
D808
D614
C674
C869
C099
D809
JR1901
D615
C675
JR1902
D617
JR1903
Q908
JR804
D618
C678
JR805
JR1905
Q909
D619
C679
JR1906
JR036
JR038
C870
D812
C872
C680
D620
Q910
C874
D621
Q911
D815
C875
IC601
C682
IC602
I
O
G
D622
D816
Q912
C876
Q913
I O GIC603
D623
D817
C877
IC604
I O
D624
D818
L900
T600
JR040
C878
C685
D819
L901
JR041
C879
IC606
I
O
L902
T602
IC607
T603
L903
T604
L904
T605
L905
D629
L906
IC8001 4
5
8
D820
IC801
D821
IC802
C882
IC803
D823
D054
IC8041
26
7
D824
T800
D055
T801
T802
D056
D826
D057
D827
D633
D058
J200
D828
D635
D059
J201
D829
JR051
J202
D636
D637
D638
D830
D060
D061
D831
D062
D063
D064
R100
D065
D066
D067
R104
JR254
D068
D069
JR255
R106
R107
R108
R109
D070
R300
R301
D071
R302
D072
R303R304
R110
D074
D075
R305R306
R307R308
R115
R309
R116
R118
R119
R310
R311
R312
R313
R314
R121
R315
FB901
R122
R316
FB902
R317
R123
FB903
R124
R319
R125
R126
R128
R320
R322
R323
R324
R130
R902
R326
R327
C1233
R904
R905
R906
R907R908
R909
JR096
JR097
JR098
C100
R331
C101
C102
R910
C104
THP600
R141
R911
R336
R142
C106
R337
C107
R913
R338
R914
C108
R339
R915
C109
R916
R917R918
C300
C301
R919
C302
C303
R340
R341
C111 C112
C308
CN9041 5
R150
R920
R921
R151
C115
C309
CN905
51
C116
R152
R922
C117
R923
R154
C118
C119
R925
R926
R927
R928
R929
C311
C312
C313C314
C120
C316
C317
R930
C318
R931
R355
C319
R356
R932
R933
C129
C320
C321
C322
C323
R360
C900
R361
C901
R362
C902
R363
C903
R940
C904
R364
R941
C905
A001
TP601
C906
C136
C907
C137
C908
R945
C909
C139
R946
C2601
R949
C2602
C910
C911
C912
C913
A010
R950
C914
C915
C916
R952
A012
C917
R377
TP03
R953
C918
R954C919
R379
R957
A017
A018
A019
R380
C922
C923
A020
R384
C925
R385 R386
Q001
R967
Q006
Q007
Q008
Q009
D101
R392
D102
R393
R970
R394 Q201
CT139
R395
Q202
D107
D108
Q204
Q010
D109
Q205
C939
Q206
Q013
JR1010
C2631
JR1011
Q016
L003L004
L005
Q8009
EB
L006
C2636
L007
JR300
L008L009
C946
C947
Q8010
BE
JR111
JR112
L010
Q601
L011
L012
L013
JR1601
Q605
B
E
JR1602
C952
C953
Q608
C2648
Q609D2625
C955
C956
R992
R993
C958
Q800
C959
Q801
Q802
E
B
PH600
1
2 34
Q804
EB
R8000R8001
Q805
BE
Q806
R8002
R8003
Q807
C960
L600
GS
Q808
R8004
D900
C961
L601
Q809
D901
R8005
C962
L602
D902C963
D903
R8007
C964
R8008
D904
C965
R8009
D905
D906 D907
C967
Q810
D908
C968C969
JR902
JR903
JR904
Q814
R8010
L800
JR905
L031
R8011
JR906
Q816
L032
L802
R8012
JR907
L803
L033
R8014
D910
L804
C970
D911
R8015
L805
L035
C971
D912
L036
L806
C972
D913
C973
D914
C974
D915
W001
C975
C976
D916
W002
D917
W003
D918
R2645
FB001
R2646
R2647
D920D921D922
D923
D927
D928
D929
R001
R002
R003
R004
W018
JR1256
R006
D930
D931
D932
R200
R201
R202
PS602
R203
PS603
W024
R204
R010
CF100
PS605
W025
R205
R011
W026
R012
W027
R207
R208
R014
VDR600
R015
FB601
FB603
1-688-691-13
(1-722-796-13)
R3
VR
L
SP R
GND
SP L/SP
GND
DGCT
DGCDGC
DGCT
NS-NCNS+
KEY NC
GND
3DGND
OUT-GND/3D
R
OUT+
B OUT
G OUT
R OUT
GND
IK
9V
GNDU OUT
V OUTGND
Y OUT
4
8
5
1
2
3
4
5
6
78
9
10
11
12
13
FBT
GND
V IN
U IN GND
Y IN
+B NC
GND
VM OUT
H+ H+ H- H- V- V+
H1
NC GND
NC
200V
H++B
200V
H1
GNDGND -13V
+13V
ABL
F600
AC IN AC IN
4 1
85
8
14
5
1128
3233
6465
96
97
AGC
B INT
B DAT
B CLK
GND
1
6
1
5 8
1
2
4
GND
Y OUTGND
GNDU OUT/FB
V OUT
1
5
GSECONDARY
PRIMARY
R1201
C328
C325
W010
JR908
R951
IC605
D639
JR1907
R924
R9063
D933 D934
C980
C324
C013
PS604
D641
13
1
JR909
JR1012
FB002
CN907
C921JW1901
CN0051
3
CN908W028
W057
R9018
NC
L908
L907
C940
JR1014
L039FB004
JR1013
L038FB003
15
2
CN203
OVCC
IC002
1
20
21
B2
B1
A2A1
A20
A21
B20
B21
JR011
JR022
L201
C883
FB101
JR1050
W060
CN901
CN902
D215
R947
R948
D076
C239
C240
A
1 2 3 4 5 6 7 8 9 10 11 12 13 14
B
C
D
E
F
G
H
I
J
– A Board –
– 47 –
KV-21CL5KRM-W100
C [RGB AMP]
PRINTED WIRING BOARDS
200V
NC
NC
GNDH1
BGR
GND1K9V
1-688-692-13(1-722-796-13)
B IN
G IN
R IN
GND
IK
VDD
R OUT
G OUT
B OUT
GND
KR
KG
G1-3
KB
G1-2
H2H1
G1-1
G2
RCV
G41
3
45 6
7
8
9
10
11
13
GND
2
1
8 91
7
15
D750
D754D755
D756
IC751
D781
J751
A701
A703A705
RV750
L750
CN701
CN703CN704
CN705
L780
L781
L782
L783
R756
R757
R758
R760
R763
R764R765
R773
R774
R780
R781
R783
C751
C752
C753
C754
R794
R795
EY701
EY703
C781
C782
C787
JW1781
JW1782
D782
Q701R713
R752
R753
R754
R766
R767
R768
R775
R777
R778
R784
C783
C786
C788
C789
C790
D780
R3
EY706
EY707A704
A702
R785R776
R786C759
JW1750
– C Board –
– 48 –
KV-21CL5KRM-W100
TOP VIEW
MSB709-RT1MSD601-RT1UN2211UN2216
AM01AV1D1NL20UD3S6M-FEGP20GEL1ZGPO8DRU4AM-T3
D3SB60F3 HSS82-TJRD5.1ESB2MTZJ-T-77-15UPC574J1SS133T-77
1PS226-115 BA18BC0FP-E2
MMDL914T1RD3.6SB
4-6. SEMICONDUCTORS
TRANSISTOR
DIODE
MA2ZD14001SOUDZSTE-175.6BUDZSTE-179.1B
STV9302A
STR-F6267S-LF1357 TA7805S RPM7240-H5 TDA6108AJF/N1BA033T
S3L20UF410ERB20-TA2B510ERB20-TB311EQS10-TB5
E
B
C
2SC3209LK
E C B
IRF614-005 FN155 2SA1091-0 2SC5885
CATHODE
ANODE CATHODE
ANODE
ANODE
CATHODE
BY228/A52A
IC
CATHODE
ANODE1
7
PQ09RD1SJ00HPQ018SEF01SZH
3
1
2
1
3
2
1
9
SPB-25MVWF
CATHODE
ANODE(GRN) ANODE
(GRN)
TDA12027H/N1B0B0AJ
TOP VIEW
– 49 –
KV-21CL5KRM-W100
IC
AN5276T
DIP
1 TOP VIEW
Dual In-line PackagePin 6~98
NJM4556AD
Small Outline L-leaded PackagePin 8~98
SOP
1 TOP VIEW
CAT24WC16J1-TE13LM2903DTTJM4558CDT
– 50 –
KV-21CL5KRM-W100
SECTION 5EXPLODED VIEWS
• Items marked " ∗ " are not stocked sincethey are seldom required for routineservice. Some delay should beanticipated when ordering these items.
The components identif ied byshading and mark ! are criticalfor safety.Replace only with part numberspecified.
NOTE:• Items with no part number and no
description are not stocked becausethey are seldom required for routineservice.
• The construction parts of an assembledpart are indicated with a collationnumber in the remark column.
5-1. CHASSISz : 7-685-648-79 SCREW +BVTP 3 × 12x : 7-685-663-71 SCREW +BVTP 4 × 16v : 4-204-489-02 PT SCREWV : 4-039-356-01 SCREW (3 × 12),(+)BV TAPPING
Note: Complete PWB A comes with Mounted PWB, C
1 X-4042-200-1 BEZNET ASSY 2-4, 27,292 4-093-773-01 CONTROL DOOR3 4-092-366-01 BUTTON POWER4 4-036-405-71 SPRING COMPRESSION5 ! 8-738-867-05 PICTURE TUBE (A51LPT60X)
6 1-452-032-00 MAGNET DISC7 4-093-512-11 COVER REAR (v 8 screws)8 4-202-554-02 HOLDER HV CABLE9 4-046-600-11 SPACER DY10 4-077-228-02 PIECE TLH CONVERGENCE
11 ! 8-451-505-31 DEFLECTION YOKE (Y21RSA-X)12 * A-1405-418-A MOUNTED PWB, C13 4-206-641-01 PT SCREW14 4-369-318-21 SPRING TENSION15 ! 1-456-280-11 DEGAUSSING COIL
16 4-058-870-01 SCREW, (4x 16) W(+) P TAPPING17 4-093-607-01 HOLDER DGC
REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK
18 1-825-039-11 SPEAKER (15x6.5CM)19 4-094-690-01 PIECE (A) 90 CONV CORRECT20 * A-1302-400-A COMPLETE PWB, A
21 ! 1-453-329-41 TRANSFORMER ASSY FLYBACK(NX-4751//M3A4)
22 8-598-623-00 TUNER BTP-AC42123 4-022-115-00 HOLDER AC CORD24 * 4-093-760-31 BRACKET TERMINAL25 ! 1-783-083-11 CORD POWER (WITH FILTER)
26 * 4-092-370-11 BRACKET FBT27 4-092-367-01 GUIDE LIGHT28 1-477-678-71 TOP SWITCH BLOCK29 * 4-093-771-01 COVER FRONT PANEL30 4-088-870-01 CUSHION DGC
31 1-452-728-41 COIL NA ROTATION (RT-154)32 4-046-981-41 BRACKET SPEAKER
5
1
27
2
4
3
29
28
13
8
9
9
10
12
14
15
6
18
181332
19
V
V
V16
32
1617
7
23
20
22
26 25
24
21
31
11
30
30
– 51 –
The components identified by shadingand mark ! are critical for safety.Replace only with part number specified.
REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK
KV-21CL5KRM-W100
* A-1302-400-A COMPLETE PWB, A******************
* 1-564-508-11 PLUG, CONNECTOR 5P* 1-564-510-11 PLUG, CONNECTOR 7P
1-900-704-54 CONNECTOR ASSY, 3P4-382-854-01 SCREW (M3X8), P, SW (+)4-382-854-21 SCREW (M3X14), P, SW (+)
A015 * 4-055-304-01 HOLDER, LEDA016 * 4-042-408-01 PIN, COATING LEADA018 * 4-042-408-01 PIN, COATING LEAD
<CAPACITOR>
C001 1-162-927-11 CERAMIC CHIP 100PF 5.00% 50VC002 1-126-935-11 ELECT 470UF 20.00% 16VC003 1-162-927-11 CERAMIC CHIP 100PF 5.00% 50VC004 1-126-933-11 ELECT 100UF 20.00% 16VC005 1-126-933-11 ELECT 100UF 20.00% 16V
C006 1-126-933-11 ELECT 100UF 20.00% 16VC008 1-126-947-11 ELECT 47UF 20.00% 25VC010 1-164-315-11 CERAMIC CHIP 470PF 5.00% 50VC012 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC013 1-126-933-11 ELECT 100UF 20.00% 16V
C014 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC018 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC020 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 16VC021 1-162-927-11 CERAMIC CHIP 100PF 5.00% 50VC022 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C023 1-125-891-11 CERAMIC CHIP 0.47UF 10.00% 10VC024 1-126-965-91 ELECT 22UF 20.00% 50VC025 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC026 1-126-947-11 ELECT 47UF 20.00% 25VC028 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 16V
C029 1-126-965-91 ELECT 22UF 20.00% 50VC030 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC032 1-162-915-11 CERAMIC CHIP 10PF 0.50PF 50VC034 1-162-915-11 CERAMIC CHIP 10PF 0.50PF 50VC036 1-126-933-11 ELECT 100UF 20.00% 16V
C037 1-126-963-11 ELECT 4.7UF 20.00% 50VC038 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 16VC041 1-162-968-11 CERAMIC CHIP 0.0047UF 10.00% 50VC042 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC044 1-164-505-11 CERAMIC CHIP 2.2UF 16V
C046 1-162-969-11 CERAMIC CHIP 0.0068UF 10.00% 25VC048 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC049 1-164-227-11 CERAMIC CHIP 0.022UF 10.00% 25V
C050 1-126-964-11 ELECT 10UF 20.00% 50VC052 1-162-964-11 CERAMIC CHIP 0.001UF 10.00% 50V
C053 1-164-227-11 CERAMIC CHIP 0.022UF 10.00% 25VC054 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 16VC055 1-136-167-00 FILM 0.15UF 5.00% 50VC056 1-126-933-11 ELECT 100UF 20.00% 16VC057 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25V
C058 1-162-964-11 CERAMIC CHIP 0.001UF 10.00% 50VC060 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 16VC061 1-164-173-11 CERAMIC CHIP 0.0039UF 10.00% 50VC062 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 16VC063 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 16V
C064 1-126-961-11 ELECT 2.2UF 20.00% 50VC065 1-126-962-11 ELECT 3.3UF 20.00% 50VC067 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 16VC069 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 16VC070 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 16V
C072 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25VC073 1-126-961-11 ELECT 2.2UF 20.00% 50VC077 1-165-176-11 CERAMIC CHIP 0.047UF 10.00% 16VC078 1-162-925-11 CERAMIC CHIP 68PF 5.00% 50VC080 1-162-964-11 CERAMIC CHIP 0.001UF 10.00% 50V
C081 1-162-964-11 CERAMIC CHIP 0.001UF 10.00% 50VC089 1-162-964-11 CERAMIC CHIP 0.001UF 10.00% 50VC090 1-162-927-11 CERAMIC CHIP 100PF 5.00% 50VC091 1-162-927-11 CERAMIC CHIP 100PF 5.00% 50VC092 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 16V
C093 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 16VC094 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 16VC095 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 16VC096 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 16VC100 1-162-964-11 CERAMIC CHIP 0.001UF 10.00% 50V
C101 1-126-933-11 ELECT 100UF 20.00% 16VC102 1-162-923-11 CERAMIC CHIP 47PF 5.00% 50VC104 1-162-923-11 CERAMIC CHIP 47PF 5.00% 50VC107 1-126-935-11 ELECT 470UF 20.00% 16VC108 1-126-935-11 ELECT 470UF 20.00% 16V
C109 1-162-968-11 CERAMIC CHIP 0.0047UF 10.00% 50VC112 1-163-021-91 CERAMIC CHIP 0.01UF 10.00% 50VC116 1-162-968-11 CERAMIC CHIP 0.0047UF 10.00% 50VC118 1-126-965-91 ELECT 22UF 20.00% 50VC119 1-163-021-91 CERAMIC CHIP 0.01UF 10.00% 50V
C120 1-126-935-11 ELECT 470UF 20.00% 16VC136 1-162-964-11 CERAMIC CHIP 0.001UF 10.00% 50VC137 1-162-964-11 CERAMIC CHIP 0.001UF 10.00% 50VC139 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25VC200 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C201 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC202 1-165-176-11 CERAMIC CHIP 0.047UF 10.00% 16VC203 1-165-176-11 CERAMIC CHIP 0.047UF 10.00% 16V
SECTION 6ELECTRICAL PARTS LIST
NOTE:
The components identified by shadingand mark ! are critical for safety.Replace only with part number specified.
When indicating par ts by referencenumber, please include the board name.
• Items marked " ∗ " are not stocked sincethey are seldom required for routineservice. Some delay should be antici-pated when ordering these items.
• All variable and adjustable resistors havecharacteristic curve B, unless otherwisenoted.
• All resistors are in ohms• F : nonflammable
CAPACITORS• MF : µF, PF : µµF
COILS• MMH : mH, UH : µH
REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK
A
Note: Complete PWB A comes with Mounted PWB, C
– 52 –
The components identified by shadingand mark ! are critical for safety.Replace only with part number specified.
REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK
KV-21CL5KRM-W100
C204 1-130-495-00 MYLAR 0.1UF 5.00% 50VC205 1-126-959-11 ELECT 0.47UF 20.00% 50V
C206 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25VC207 1-130-495-00 MYLAR 0.1UF 5.00% 50VC208 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25VC209 1-126-959-11 ELECT 0.47UF 20.00% 50VC210 1-126-968-11 ELECT 100UF 20.00% 50V
C211 1-126-963-11 ELECT 4.7UF 20.00% 50VC213 1-115-339-11 CERAMIC CHIP 0.1UF 10.00% 50VC214 1-126-942-61 ELECT 1000UF 20.00% 25VC215 1-128-550-11 ELECT 2200UF 20.00% 50VC216 1-126-965-91 ELECT 22UF 20.00% 50V
C217 1-126-942-61 ELECT 1000UF 20.00% 25VC218 1-126-965-91 ELECT 22UF 20.00% 50VC219 1-126-934-11 ELECT 220UF 20.00% 16VC220 1-126-964-11 ELECT 10UF 20.00% 50VC231 1-137-374-11 MYLAR 0.047UF 5.00% 50V
C232 1-137-374-11 MYLAR 0.047UF 5.00% 50VC234 1-164-315-11 CERAMIC CHIP 470PF 5.00% 50VC235 1-164-315-11 CERAMIC CHIP 470PF 5.00% 50VC300 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC301 1-164-315-11 CERAMIC CHIP 470PF 5.00% 50V
C302 1-164-505-11 CERAMIC CHIP 2.2UF 16VC303 1-126-933-11 ELECT 100UF 20.00% 16VC304 1-126-933-11 ELECT 100UF 20.00% 16VC308 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25VC311 1-126-961-11 ELECT 2.2UF 20.00% 50V
C312 1-162-964-11 CERAMIC CHIP 0.001UF 10.00% 50VC313 1-162-964-11 CERAMIC CHIP 0.001UF 10.00% 50VC314 1-126-964-11 ELECT 10UF 20.00% 50VC316 1-125-891-11 CERAMIC CHIP 0.47UF 10.00% 10VC317 1-126-934-11 ELECT 220UF 20.00% 16V
C318 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 16VC319 1-162-923-11 CERAMIC CHIP 47PF 5.00% 50VC320 1-162-923-11 CERAMIC CHIP 47PF 5.00% 50VC321 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25VC322 1-162-964-11 CERAMIC CHIP 0.001UF 10.00% 50V
C323 1-162-964-11 CERAMIC CHIP 0.001UF 10.00% 50VC325 1-162-964-11 CERAMIC CHIP 0.001UF 10.00% 50VC328 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25V
C600 ! 1-119-889-51 CERAMIC 4700PF 20.00% 250VC602 ! 1-165-538-11 MYLAR 0.1UF 10 275V
C605 1-161-830-00 CERAMIC 0.0047UF 99% 500VC606 1-161-830-00 CERAMIC 0.0047UF 99% 500VC609 1-161-830-00 CERAMIC 0.0047UF 99% 500VC610 1-161-830-00 CERAMIC 0.0047UF 99% 500VC611 1-117-751-11 ELECT(BLOCK) 220UF 20.00% 450V
C612 1-125-893-11 FILM 680PF 3.00% 1.5KVC616 1-164-230-11 CERAMIC CHIP 220PF 5.00% 50VC619 1-130-491-00 MYLAR 0.047UF 5.00% 50VC621 1-126-963-11 ELECT 4.7UF 20.00% 50VC622 ! 1-119-894-51 CERAMIC 2200PF 20.00% 250V
C623 1-162-966-11 CERAMIC CHIP 0.0022UF 10.00% 50VC624 1-126-967-11 ELECT 47UF 20.00% 50VC625 ! 1-127-942-51 CERAMIC 330PF 10% 250VC626 1-102-228-00 CERAMIC 470PF 10.00% 500VC628 1-125-772-91 CERAMIC 1500PF 10.00% 2KV
C630 1-128-549-11 ELECT 3300UF 20.00% 35VC632 1-126-953-11 ELECT 2200UF 20.00% 35VC634 1-126-941-11 ELECT 470UF 20.00% 25V
C635 1-126-971-11 ELECT 470UF 20.00% 50VC637 1-126-933-11 ELECT 100UF 20.00% 16V
C638 1-126-933-11 ELECT 100UF 20.00% 16VC639 1-126-933-11 ELECT 100UF 20.00% 16VC641 1-126-933-11 ELECT 100UF 20.00% 16VC643 1-125-891-11 CERAMIC CHIP 0.47UF 10.00% 10VC644 1-164-315-11 CERAMIC CHIP 470PF 5.00% 50V
C647 1-126-935-11 ELECT 470UF 20.00% 16VC649 1-126-933-11 ELECT 100UF 20.00% 16VC652 1-102-228-00 CERAMIC 470PF 10.00% 500VC653 1-102-228-00 CERAMIC 470PF 10.00% 500VC654 1-102-228-00 CERAMIC 470PF 10.00% 500V
C657 ! 1-127-942-51 CERAMIC 330PF 10% 250VC660 ! 1-165-539-11 MYLAR 0.22UF 10 275VC662 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 16VC665 1-110-626-11 ELECT 330UF 20.00% 160VC666 ! 1-165-538-11 MYLAR 0.1UF 10 275V
C668 1-126-933-11 ELECT 100UF 20.00% 16VC670 ! 1-127-942-51 CERAMIC 330PF 10% 250VC672 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25VC678 1-164-505-11 CERAMIC CHIP 2.2UF 16VC680 1-164-315-11 CERAMIC CHIP 470PF 5.00% 50V
C682 1-115-466-91 ELECT 1000UF 20.00% 16VC685 1-126-934-11 ELECT 220UF 20.00% 16VC800 1-126-963-11 ELECT 4.7UF 20.00% 50VC803 1-126-947-11 ELECT 47UF 20.00% 25VC804 1-126-964-11 ELECT 10UF 20.00% 50V
C805 1-126-960-11 ELECT 1UF 20.00% 50VC806 1-106-375-12 MYLAR 0.022UF 99% 200VC807 1-162-964-11 CERAMIC CHIP 0.001UF 10.00% 50VC808 1-102-244-00 CERAMIC 220PF 10.00% 500VC809 1-162-964-11 CERAMIC CHIP 0.001UF 10.00% 50V
C810 1-162-318-11 CERAMIC 0.001UF 10.00% 500VC811 1-126-933-11 ELECT 100UF 20.00% 16VC822 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25VC825 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25VC826 1-164-227-11 CERAMIC CHIP 0.022UF 10.00% 25V
C828 1-126-933-11 ELECT 100UF 20.00% 16VC830 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25VC831 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 16VC832 1-164-230-11 CERAMIC CHIP 220PF 5.00% 50VC833 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 16V
C835 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25VC837 1-162-968-11 CERAMIC CHIP 0.0047UF 10.00% 50VC838 1-106-220-00 MYLAR 0.1UF 10.00% 100VC839 1-162-966-11 CERAMIC CHIP 0.0022UF 10.00% 50VC840 ! 1-117-647-11 FILM 13000PF 3.00% 1.2KV
C841 1-107-846-11 FILM 0.1UF 5.00% 250VC842 1-100-122-21 FILM 0.022UF 5% 400VC844 1-165-176-11 CERAMIC CHIP 0.047UF 10.00% 16VC845 1-162-964-11 CERAMIC CHIP 0.001UF 10.00% 50VC846 1-117-767-91 CERAMIC 330PF 10.00% 2KV
C847 1-107-364-11 MYLAR 0.01UF 10.00% 200VC848 1-107-364-11 MYLAR 0.01UF 10.00% 200VC849 1-106-375-12 MYLAR 0.022UF 99% 200VC850 1-106-220-00 MYLAR 0.1UF 10.00% 100VC851 1-107-675-11 ELECT 1UF 20.00% 450V
C852 1-117-665-11 FILM 0.33UF 5.00% 250VC854 1-126-948-11 ELECT 100UF 20.00% 35VC855 1-107-894-11 ELECT 220UF 20.00% 35V
A
– 53 –
The components identified by shadingand mark ! are critical for safety.Replace only with part number specified.
REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK
KV-21CL5KRM-W100
C857 1-104-666-11 ELECT 220UF 20.00% 25VC858 1-137-194-81 FILM 0.47UF 5.00% 50V
C860 1-162-318-11 CERAMIC 0.001UF 10.00% 500VC861 1-104-666-11 ELECT 220UF 20.00% 25VC862 1-162-318-11 CERAMIC 0.001UF 10.00% 500VC863 1-165-176-11 CERAMIC CHIP 0.047UF 10.00% 16VC867 1-165-441-81 ELECT 33UF 20% 160V
C868 1-102-228-00 CERAMIC 470PF 10.00% 500VC869 1-107-654-11 ELECT 33UF 20.00% 250VC870 1-106-387-00 MYLAR 0.068UF 10.00% 200VC876 1-162-964-11 CERAMIC CHIP 0.001UF 10.00% 50VC877 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25V
C878 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25VC879 1-162-964-11 CERAMIC CHIP 0.001UF 10.00% 50VC900 1-117-720-11 CERAMIC CHIP 4.7UF 10VC901 1-117-720-11 CERAMIC CHIP 4.7UF 10VC902 1-126-957-11 ELECT 0.22UF 20.00% 50V
C903 1-126-935-11 ELECT 470UF 20.00% 16VC904 1-126-957-11 ELECT 0.22UF 20.00% 50VC905 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25VC906 1-164-346-11 CERAMIC CHIP 1UF 16VC907 1-164-346-11 CERAMIC CHIP 1UF 16V
C908 1-164-346-11 CERAMIC CHIP 1UF 16VC909 1-164-346-11 CERAMIC CHIP 1UF 16VC910 1-164-315-11 CERAMIC CHIP 470PF 5.00% 50VC911 1-164-315-11 CERAMIC CHIP 470PF 5.00% 50VC916 1-162-959-11 CERAMIC CHIP 330PF 5.00% 50V
C917 1-162-959-11 CERAMIC CHIP 330PF 5.00% 50VC918 1-164-346-11 CERAMIC CHIP 1UF 16VC919 1-164-346-11 CERAMIC CHIP 1UF 16VC922 1-164-315-11 CERAMIC CHIP 470PF 5.00% 50VC923 1-126-947-11 ELECT 47UF 20.00% 25V
C925 1-164-315-11 CERAMIC CHIP 470PF 5.00% 50VC939 1-164-315-11 CERAMIC CHIP 470PF 5.00% 50VC940 1-164-315-11 CERAMIC CHIP 470PF 5.00% 50VC946 1-164-315-11 CERAMIC CHIP 470PF 5.00% 50VC947 1-164-315-11 CERAMIC CHIP 470PF 5.00% 50V
C952 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 16VC955 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC956 1-126-933-11 ELECT 100UF 20.00% 16VC967 1-164-505-11 CERAMIC CHIP 2.2UF 16VC972 1-162-964-11 CERAMIC CHIP 0.001UF 10.00% 50V
C973 1-126-964-11 ELECT 10UF 20.00% 50VC974 1-126-964-11 ELECT 10UF 20.00% 50VC975 1-162-964-11 CERAMIC CHIP 0.001UF 10.00% 50VC976 1-126-935-11 ELECT 470UF 20.00% 16VC1019 1-125-891-11 CERAMIC CHIP 0.47UF 10.00% 10V
C2602 1-102-114-00 CERAMIC 470PF 10.00% 50VC2631 1-102-228-00 CERAMIC 470PF 10.00% 500VC2636 1-126-972-11 ELECT 1000UF 20.00% 50VC2648 1-126-952-11 ELECT 1000UF 20.00% 35V
<CONNECTOR>
CN005 * 1-564-506-11 PLUG, CONNECTOR 3PCN200 * 1-564-507-11 PLUG, CONNECTOR 4PCN601 * 1-691-134-11 PIN, CONNECTOR (PC BOARD) 2PCN602 * 1-580-843-11 PIN, CONNECTOR (POWER)CN603*! 1-508-786-13 PIN, CONNECTOR (5MM PITCH) 2P
CN800 * 1-564-506-11 PLUG, CONNECTOR 3PCN901 * 1-766-296-21 CONNECTOR, DUAL SCARTCN904 * 1-564-508-11 PLUG, CONNECTOR 5P
<DIODE>
D002 8-719-081-97 MMDL914T1D003 8-719-081-97 MMDL914T1D023 8-719-069-60 UDZSTE-179.1BD024 8-719-069-60 UDZSTE-179.1BD025 8-719-069-60 UDZSTE-179.1B
D054 8-719-069-55 DIODE UDZSTE-175.6BD055 8-719-069-55 DIODE UDZSTE-175.6BD056 8-719-081-97 MMDL914T1D057 8-719-081-97 MMDL914T1D058 8-719-081-97 MMDL914T1
D059 8-719-081-97 MMDL914T1D060 8-719-069-55 DIODE UDZSTE-175.6BD061 8-719-081-97 MMDL914T1D062 8-719-069-55 DIODE UDZSTE-175.6BD063 8-719-081-97 MMDL914T1
D064 8-719-069-55 DIODE UDZSTE-175.6BD065 8-719-069-55 DIODE UDZSTE-175.6BD066 8-719-908-03 GP08DD068 8-719-069-55 DIODE UDZSTE-175.6BD071 8-719-081-97 MMDL914T1
D072 8-719-081-97 MMDL914T1D074 8-719-081-97 MMDL914T1D075 8-719-069-60 UDZSTE-179.1BD076 8-719-081-97 MMDL914T1D101 8-719-066-11 1PS184-115
D103 8-759-157-40 UPC574JD107 8-719-081-97 MMDL914T1D108 8-719-069-55 DIODE UDZSTE-175.6BD109 8-719-069-55 DIODE UDZSTE-175.6BD200 8-719-062-51 1PS226-115
D201 8-719-081-97 MMDL914T1D202 8-719-081-97 MMDL914T1D203 8-719-081-97 MMDL914T1D204 8-719-081-97 MMDL914T1D205 8-719-081-97 MMDL914T1
D208 8-719-081-97 MMDL914T1D211 8-719-062-51 1PS226-115D212 8-719-081-97 MMDL914T1D213 8-719-081-97 MMDL914T1D214 8-719-081-97 MMDL914T1
D600 8-719-081-97 MMDL914T1D602 6-500-481-31 DIODE AM01AV1D603 6-500-481-31 DIODE AM01AV1D604 8-719-077-77 D3SB60F3D605 8-719-109-85 RD5.1ESB2
D617 6-500-567-11 DIODE 10ERB20-TA2B5D618 8-719-063-70 D1NL20UD619 6-500-567-11 DIODE 10ERB20-TA2B5D621 8-719-312-10 RU4AM-T3D622 8-719-085-37 11EQS10-TB5
D623 6-500-567-31 DIODE 10ERB20-TB3D624 8-719-510-73 S3L20UF4D629 8-719-109-85 RD5.1ESB2D633 8-719-923-86 MTZJ-T-77-15D635 8-719-072-63 DIODE PDZ3.6B-115
D637 8-719-072-70 MA2ZD14001S0D638 8-719-081-97 MMDL914T1D639 8-719-027-22 D3S6M-FD800 8-719-081-97 MMDL914T1D801 8-719-081-97 MMDL914T1
A
– 54 –
The components identified by shadingand mark ! are critical for safety.Replace only with part number specified.
REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK
KV-21CL5KRM-W100
D804 8-719-991-33 1SS133T-77D805 8-719-991-33 1SS133T-77D807 8-719-991-33 1SS133T-77D808 8-719-991-33 1SS133T-77D809 8-719-991-33 1SS133T-77
D815 8-719-069-60 UDZSTE-179.1BD816 8-719-081-00 DIODE BY228/A52AD817 8-719-979-85 EGP20GD818 8-719-109-85 RD5.1ESB2D819 6-500-567-31 DIODE 10ERB20-TB3
D820 8-719-908-03 GP08DD821 6-500-567-31 DIODE 10ERB20-TB3D823 8-719-302-43 EL1ZD824 8-719-302-43 EL1ZD827 8-719-302-43 EL1Z
D829 8-719-069-55 DIODE UDZSTE-175.6BD830 8-719-081-97 MMDL914T1D900 8-719-069-60 UDZSTE-179.1BD901 8-719-069-60 UDZSTE-179.1BD902 8-719-069-55 DIODE UDZSTE-175.6B
D903 8-719-069-55 DIODE UDZSTE-175.6BD904 8-719-069-55 DIODE UDZSTE-175.6BD905 8-719-069-60 UDZSTE-179.1BD906 8-719-069-55 DIODE UDZSTE-175.6BD907 8-719-069-55 DIODE UDZSTE-175.6B
D908 8-719-069-55 DIODE UDZSTE-175.6BD910 8-719-069-55 DIODE UDZSTE-175.6BD911 8-719-069-55 DIODE UDZSTE-175.6BD912 8-719-069-55 DIODE UDZSTE-175.6BD913 8-719-069-55 DIODE UDZSTE-175.6B
D914 8-719-083-18 DIODE SPB-25MVWFD915 8-719-069-55 DIODE UDZSTE-175.6BD916 8-719-069-55 DIODE UDZSTE-175.6BD918 8-719-069-55 DIODE UDZSTE-175.6BD920 8-719-069-55 DIODE UDZSTE-175.6B
D922 8-719-069-55 DIODE UDZSTE-175.6BD927 8-719-069-55 DIODE UDZSTE-175.6BD928 8-719-069-60 UDZSTE-179.1BD929 8-719-069-60 UDZSTE-179.1BD930 8-719-069-55 DIODE UDZSTE-175.6B
D931 8-719-157-97 RD3.6SBD932 8-719-157-97 RD3.6SBD933 8-719-069-60 UDZSTE-179.1BD934 8-719-069-60 UDZSTE-179.1BD2625 8-719-510-73 S3L20UF4
<CONNECTOR>
DY800 * 1-580-798-11 CONNECTOR PIN (DY) 6P
<FUSE>
F600 ! 1-576-232-21 FUSE 5A/250
<FERRITE BEAD>
FB001 1-410-397-21 FERRITE 1.1UHFB002 1-414-594-11 FERRITE 0UHFB101 1-414-229-11 FERRITE 0UHFB603 1-410-397-21 FERRITE 1.1UHFB608 1-412-911-31 FERRITE 0UH
FB800 1-410-397-21 FERRITE 1.1UHFB901 1-469-869-21 FERRITE 0UHFB902 1-412-979-21 INDUCTOR 1UHFB903 1-412-979-21 INDUCTOR 1UHFB2607 1-410-397-21 FERRITE 1.1UH
FH603 1-533-725-11 FUSE HOLDER 0A 0V
<IC>
IC001 6-705-430-51 IC TDA12027H/N1B0B0PJIC002 6-704-532-01 RPM7240-H5IC003 8-759-678-07 CAT24WC16JI-TE1IC200 6-703-475-01 IC AN5276TIC601 6-704-263-01 IC STR-F6267S LF1357
IC602 6-703-479-01 IC PQ09RD1SJ00HIC603 6-703-478-01 IC PQ018EF01SZHIC604 8-759-231-53 TA7805SIC605 6-705-063-01 IC SE135N-LF38IC606 8-759-445-59 BA033T
IC607 8-759-832-05 IC BA18BC0FP-E2IC800 8-759-356-16 NJM4556ADIC801 6-703-708-01 IC LM2903DTIC802 6-701-937-01 IC TJM4558CDTIC804 6-703-470-01 IC STV9302A
<JACK>
J200 1-770-786-22 JACKJ903 1-770-329-13 JACK, PIN 3P
<CHIP CONDUCTOR>
JR001 1-216-864-11 SHORT CHIP 0JR002 1-216-864-11 SHORT CHIP 0JR003 1-216-864-11 SHORT CHIP 0JR004 1-216-864-11 SHORT CHIP 0JR005 1-216-864-11 SHORT CHIP 0
JR006 1-216-864-11 SHORT CHIP 0JR008 1-216-864-11 SHORT CHIP 0JR009 1-216-864-11 SHORT CHIP 0JR011 1-216-864-11 SHORT CHIP 0JR012 1-216-864-11 SHORT CHIP 0
JR013 1-216-864-11 SHORT CHIP 0JR014 1-216-864-11 SHORT CHIP 0JR015 1-216-864-11 SHORT CHIP 0JR016 1-216-864-11 SHORT CHIP 0JR017 1-216-864-11 SHORT CHIP 0
JR018 1-216-864-11 SHORT CHIP 0JR019 1-216-864-11 SHORT CHIP 0JR020 1-216-864-11 SHORT CHIP 0JR021 1-216-864-11 SHORT CHIP 0JR022 1-216-864-11 SHORT CHIP 0
JR024 1-216-864-11 SHORT CHIP 0JR025 1-216-864-11 SHORT CHIP 0JR026 1-216-864-11 SHORT CHIP 0JR027 1-216-864-11 SHORT CHIP 0JR036 1-216-864-11 SHORT CHIP 0
JR038 1-216-864-11 SHORT CHIP 0JR040 1-216-864-11 SHORT CHIP 0
A
– 55 –
The components identified by shadingand mark ! are critical for safety.Replace only with part number specified.
REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK
KV-21CL5KRM-W100
JR041 1-216-864-11 SHORT CHIP 0JR051 1-216-864-11 SHORT CHIP 0JR093 1-216-864-11 SHORT CHIP 0
JR096 1-216-864-11 SHORT CHIP 0JR097 1-216-864-11 SHORT CHIP 0JR098 1-216-864-11 SHORT CHIP 0JR111 1-216-864-11 SHORT CHIP 0JR112 1-216-864-11 SHORT CHIP 0
JR200 1-216-864-11 SHORT CHIP 0JR300 1-216-864-11 SHORT CHIP 0JR600 1-216-864-11 SHORT CHIP 0JR601 1-216-864-11 SHORT CHIP 0JR602 1-216-864-11 SHORT CHIP 0
JR800 1-216-864-11 SHORT CHIP 0JR805 1-216-864-11 SHORT CHIP 0JR902 1-216-864-11 SHORT CHIP 0JR903 1-216-864-11 SHORT CHIP 0JR904 1-216-864-11 SHORT CHIP 0
JR905 1-216-864-11 SHORT CHIP 0JR906 1-216-864-11 SHORT CHIP 0JR907 1-216-864-11 SHORT CHIP 0JR909 1-216-864-11 SHORT CHIP 0JR1011 1-216-864-11 SHORT CHIP 0
JR1013 1-216-864-11 SHORT CHIP 0JR1014 1-216-864-11 SHORT CHIP 0JR1100 1-216-864-11 SHORT CHIP 0JR1101 1-216-864-11 SHORT CHIP 0JR1107 1-216-864-11 SHORT CHIP 0
JR1108 1-216-864-11 SHORT CHIP 0JR1903 1-216-864-11 SHORT CHIP 0
<COIL>
L003 1-414-856-11 INDUCTOR 10UHL004 1-414-187-11 INDUCTOR 47UHL005 1-414-856-11 INDUCTOR 10UHL006 1-414-856-11 INDUCTOR 10UHL007 1-414-856-11 INDUCTOR 10UH
L008 1-414-856-11 INDUCTOR 10UHL009 1-414-856-11 INDUCTOR 10UHL010 1-469-525-91 INDUCTOR 10UHL011 1-469-525-91 INDUCTOR 10UHL012 1-412-058-11 INDUCTOR 10UH
L013 1-469-525-91 INDUCTOR 10UHL031 1-469-525-91 INDUCTOR 10UHL032 1-469-525-91 INDUCTOR 10UHL033 1-469-525-91 INDUCTOR 10UHL035 1-469-525-91 INDUCTOR 10UH
L036 1-469-525-91 INDUCTOR 10UHL100 1-414-857-11 INDUCTOR 100UHL104 1-410-989-11 INDUCTOR 0.47UHL106 1-414-187-11 INDUCTOR 47UHL201 1-406-985-11 INDUCTOR 2.2MH
L600 1-412-533-21 INDUCTOR 47UHL601 1-412-533-21 INDUCTOR 47UHL602 1-412-529-11 INDUCTOR 22UHL800 1-424-796-11 COIL, HORIZONTAL LINEARITYL802 1-406-679-11 INDUCTOR 22MH
L803 1-414-493-41 INDUCTOR 4.7MHL805 1-408-947-00 INDUCTOR 2.2MHL806 1-469-555-21 INDUCTOR 10UH
L900 1-469-525-91 INDUCTOR 10UHL901 1-412-001-31 INDUCTOR 3.9UH
L902 1-414-187-11 INDUCTOR 47UHL903 1-410-993-42 INDUCTOR 1UHL904 1-410-993-42 INDUCTOR 1UHL905 1-410-993-42 INDUCTOR 1UHL906 1-410-993-42 INDUCTOR 1UH
L2601 1-412-525-31 INDUCTOR 10UH
<PHOTO COUPLER>
PH600 ! 6-600-187-01 PHOTO COUPLER PC123Y22JOOF
<IC LINK>
PS602 ! 1-533-597-41 IC LINK 5A 90VPS603 ! 1-533-597-41 IC LINK 5A 90VPS604 1-533-597-41 IC LINK 5A 90VPS605 ! 1-533-597-41 IC LINK 5A 90VPS2601! 1-533-597-41 IC LINK 5A 90V
<TRANSISTOR>
Q001 8-729-421-22 UN2211Q006 8-729-424-67 UN2216Q007 8-729-424-67 UN2216Q008 8-729-010-25 MSD601-RT1Q010 8-729-010-05 MSB709-RT1
Q013 8-729-010-25 MSD601-RT1Q016 8-729-421-22 UN2211Q105 8-729-424-67 UN2216Q106 8-729-424-67 UN2216Q200 8-729-421-22 UN2211
Q201 8-729-010-05 MSB709-RT1Q202 8-729-010-05 MSB709-RT1Q206 8-729-421-22 UN2211Q601 8-729-010-25 MSD601-RT1Q605 6-550-572-01 TRANSISTOR FN155
Q608 8-729-010-25 MSD601-RT1Q609 8-729-010-25 MSD601-RT1Q800 8-729-010-25 MSD601-RT1Q801 8-729-010-25 MSD601-RT1Q802 8-729-010-25 MSD601-RT1
Q803 8-729-140-50 2SC3209LKQ804 8-729-200-17 2SA1091-OQ805 6-550-410-01 TRANSISTOR 2SC5885Q806 8-729-010-25 MSD601-RT1Q807 8-729-010-05 MSB709-RT1
Q808 8-729-053-33 IRF614-037Q814 8-729-010-25 MSD601-RT1Q900 8-729-010-05 MSB709-RT1Q901 8-729-424-67 UN2216Q902 8-729-424-67 UN2216
Q903 8-729-010-05 MSB709-RT1Q908 8-729-424-67 UN2216Q909 8-729-424-67 UN2216Q8009 8-729-200-17 2SA1091-OQ8010 8-729-140-50 2SC3209LK
A
– 56 –
The components identified by shadingand mark ! are critical for safety.Replace only with part number specified.
REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK
KV-21CL5KRM-W100
R213 1-216-835-11 METAL CHIP 15K 5% 1/10WR214 1-216-835-11 METAL CHIP 15K 5% 1/10WR215 1-216-833-11 METAL CHIP 10K 5% 1/10WR216 1-216-833-11 METAL CHIP 10K 5% 1/10WR217 1-249-411-11 CARBON 330 5% 1/4W
R218 1-216-295-91 SHORT CHIP 0R219 1-249-411-11 CARBON 330 5% 1/4WR220 1-216-864-11 SHORT CHIP 0R221 1-216-821-11 METAL CHIP 1K 5% 1/10WR234 1-249-401-11 CARBON 47 5% 1/4W
R235 1-249-401-11 CARBON 47 5% 1/4WR236 1-216-833-11 METAL CHIP 10K 5% 1/10WR237 1-216-809-11 METAL CHIP 100 5% 1/10WR238 1-216-809-11 METAL CHIP 100 5% 1/10WR241 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R242 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR300 1-216-809-11 METAL CHIP 100 5% 1/10WR301 1-216-861-11 METAL CHIP 2.2M 5% 1/10WR303 1-216-861-11 METAL CHIP 2.2M 5% 1/10WR304 1-216-851-11 METAL CHIP 330K 5% 1/10W
R307 1-216-864-11 SHORT CHIP 0R309 1-216-857-11 METAL CHIP 1M 5% 1/10WR310 1-216-821-11 METAL CHIP 1K 5% 1/10WR311 1-216-841-11 METAL CHIP 47K 5% 1/10WR312 1-216-857-11 METAL CHIP 1M 5% 1/10W
R313 1-216-847-11 METAL CHIP 150K 5% 1/10WR314 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10WR315 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10WR317 1-216-827-11 METAL CHIP 3.3K 5% 1/10WR320 1-218-863-11 METAL CHIP 4.7K 0.5% 1/10W
R322 1-218-863-11 METAL CHIP 4.7K 0.5% 1/10WR323 1-216-809-11 METAL CHIP 100 5% 1/10WR324 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR331 1-216-809-11 METAL CHIP 100 5% 1/10WR336 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R337 1-216-817-11 METAL CHIP 470 5% 1/10WR338 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR339 1-216-809-11 METAL CHIP 100 5% 1/10WR340 1-216-833-11 METAL CHIP 10K 5% 1/10WR341 1-216-809-11 METAL CHIP 100 5% 1/10W
R355 1-218-871-11 METAL CHIP 10K 0.5% 1/10WR356 1-216-864-11 SHORT CHIP 0R360 1-216-864-11 SHORT CHIP 0R363 1-216-864-11 SHORT CHIP 0R364 1-216-821-11 METAL CHIP 1K 5% 1/10W
R377 1-216-823-11 METAL CHIP 1.5K 5% 1/10WR379 1-216-843-11 METAL CHIP 68K 5% 1/10WR380 1-216-809-11 METAL CHIP 100 5% 1/10WR384 1-216-809-11 METAL CHIP 100 5% 1/10WR385 1-216-809-11 METAL CHIP 100 5% 1/10W
R386 1-216-809-11 METAL CHIP 100 5% 1/10WR392 1-216-833-11 METAL CHIP 10K 5% 1/10WR393 1-216-809-11 METAL CHIP 100 5% 1/10WR394 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR395 1-216-845-11 METAL CHIP 100K 5% 1/10W
R400 1-260-288-11 CARBON 0.47 5% 1/2WR401 1-260-288-11 CARBON 0.47 5% 1/2WR405 1-260-288-11 CARBON 0.47 5% 1/2WR406 1-260-127-11 CARBON 220K 5% 1/2WR411 1-214-909-00 METAL 68K 1% 1/2W
R412 1-214-765-00 METAL 33K 1% 1/4WR413 1-215-453-00 METAL 22K 1% 1/4W
<RESISTOR>
R001 1-216-827-11 METAL CHIP 3.3K 5% 1/10WR002 1-216-809-11 METAL CHIP 100 5% 1/10WR003 1-216-827-11 METAL CHIP 3.3K 5% 1/10WR004 1-216-809-11 METAL CHIP 100 5% 1/10WR010 1-216-833-11 METAL CHIP 10K 5% 1/10W
R011 1-216-821-11 METAL CHIP 1K 5% 1/10WR012 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR014 1-216-809-11 METAL CHIP 100 5% 1/10WR015 1-216-823-11 METAL CHIP 1.5K 5% 1/10WR018 1-216-809-11 METAL CHIP 100 5% 1/10W
R020 1-216-809-11 METAL CHIP 100 5% 1/10WR023 1-216-823-11 METAL CHIP 1.5K 5% 1/10WR024 1-216-809-11 METAL CHIP 100 5% 1/10WR025 1-216-809-11 METAL CHIP 100 5% 1/10WR026 1-216-809-11 METAL CHIP 100 5% 1/10W
R029 1-216-809-11 METAL CHIP 100 5% 1/10WR030 1-216-809-11 METAL CHIP 100 5% 1/10WR038 1-216-809-11 METAL CHIP 100 5% 1/10WR039 1-216-809-11 METAL CHIP 100 5% 1/10WR041 1-216-809-11 METAL CHIP 100 5% 1/10W
R042 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR044 1-216-834-11 METAL CHIP 12K 5% 1/10WR045 1-216-809-11 METAL CHIP 100 5% 1/10WR046 1-216-809-11 METAL CHIP 100 5% 1/10WR048 1-216-809-11 METAL CHIP 100 5% 1/10W
R051 1-218-885-11 METAL CHIP 39K 0.5% 1/10WR056 1-216-809-11 METAL CHIP 100 5% 1/10WR058 1-216-809-11 METAL CHIP 100 5% 1/10WR059 1-216-821-11 METAL CHIP 1K 5% 1/10WR060 1-216-809-11 METAL CHIP 100 5% 1/10W
R061 1-216-819-11 METAL CHIP 680 5% 1/10WR087 1-216-813-11 METAL CHIP 220 5% 1/10WR088 1-216-816-11 METAL CHIP 390 5% 1/10WR096 1-216-813-11 METAL CHIP 220 5% 1/10WR097 1-216-813-11 METAL CHIP 220 5% 1/10W
R098 1-216-813-11 METAL CHIP 220 5% 1/10WR099 1-216-813-11 METAL CHIP 220 5% 1/10WR115 1-216-809-11 METAL CHIP 100 5% 1/10WR116 1-216-809-11 METAL CHIP 100 5% 1/10WR121 1-215-925-11 METAL OXIDE 22K 5% 3W
R122 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR124 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR125 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR128 1-216-864-11 SHORT CHIP 0R130 1-216-809-11 METAL CHIP 100 5% 1/10W
R142 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR150 1-216-809-11 METAL CHIP 100 5% 1/10WR152 1-218-713-11 METAL CHIP 7.5K 0.5% 1/10WR154 1-216-864-11 SHORT CHIP 0R200 1-216-827-11 METAL CHIP 3.3K 5% 1/10W
R201 1-216-827-11 METAL CHIP 3.3K 5% 1/10WR202 1-216-830-11 METAL CHIP 5.6K 5% 1/10WR203 1-216-827-11 METAL CHIP 3.3K 5% 1/10WR204 1-216-827-11 METAL CHIP 3.3K 5% 1/10WR205 1-216-830-11 METAL CHIP 5.6K 5% 1/10W
R207 1-218-867-11 METAL CHIP 6.8K 5% 1/10WR208 1-218-867-11 METAL CHIP 6.8K 5% 1/10WR210 1-216-835-11 METAL CHIP 15K 5% 1/10WR211 1-216-835-11 METAL CHIP 15K 5% 1/10WR212 1-216-864-11 SHORT CHIP 0
A
– 57 –
The components identified by shadingand mark ! are critical for safety.Replace only with part number specified.
REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK
KV-21CL5KRM-W100
R414 1-260-336-11 CARBON 4.7K 5% 1/2WR416 1-260-107-11 CARBON 4.7K 5% 1/2WR420 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R421 1-216-833-11 METAL CHIP 10K 5% 1/10WR423 1-216-864-11 SHORT CHIP 0R424 1-218-899-11 METAL CHIP 150K 0.5% 1/16WR602 1-216-833-11 METAL CHIP 10K 5% 1/10WR609 1-216-833-11 METAL CHIP 10K 5% 1/10W
R612 1-215-429-00 METAL 2.2K 1% 1/4WR616 1-220-820-31 CEMENTED 1.5 5% 10WR619 1-216-363-21 METAL OXIDE 0.33 5% 2WR620 1-216-363-21 METAL OXIDE 0.33 5% 2WR621 1-249-409-11 CARBON 220 5% 1/4W
R624 1-215-429-00 METAL 2.2K 1% 1/4WR625 1-216-864-11 SHORT CHIP 0R627 1-249-385-11 CARBON 2.2 5% 1/4WR631 1-249-425-11 CARBON 4.7K 5% 1/4WR634 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R635 1-216-833-11 METAL CHIP 10K 5% 1/10WR636 1-249-421-11 CARBON 2.2K 5% 1/4WR639 1-220-820-31 CEMENTED 1.5 5% 10WR645 1-218-899-11 METAL CHIP 150K 0.5% 1/16WR646 1-218-851-11 METAL CHIP 1.5K 0.5% 1/10W
R647 1-216-821-11 METAL CHIP 1K 5% 1/10WR650 ! 1-240-917-91 METAL 8.2M 5% 1WR655 1-216-809-11 METAL CHIP 100 5% 1/10WR656 1-249-381-11 CARBON 1 5% 1/4WR658 1-245-480-21 METAL 560K 1% 1/4W
R659 1-245-482-21 METAL 680K 1% 1/4WR667 1-216-821-11 METAL CHIP 1K 5% 1/10WR668 1-216-839-11 METAL CHIP 33K 5% 1/10WR800 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR801 1-216-864-11 SHORT CHIP 0
R802 1-216-833-11 METAL CHIP 10K 5% 1/10WR803 1-216-833-11 METAL CHIP 10K 5% 1/10WR804 1-216-864-11 SHORT CHIP 0R805 1-216-837-11 METAL CHIP 22K 5% 1/10WR806 1-216-864-11 SHORT CHIP 0
R807 1-216-819-11 METAL CHIP 680 5% 1/10WR808 1-216-833-11 METAL CHIP 10K 5% 1/10WR809 1-216-833-11 METAL CHIP 10K 5% 1/10WR810 1-216-833-11 METAL CHIP 10K 5% 1/10WR812 1-216-837-11 METAL CHIP 22K 5% 1/10W
R813 1-216-837-11 METAL CHIP 22K 5% 1/10WR814 1-216-809-11 METAL CHIP 100 5% 1/10WR815 1-216-837-11 METAL CHIP 22K 5% 1/10WR816 1-216-864-11 SHORT CHIP 0R817 1-216-833-11 METAL CHIP 10K 5% 1/10W
R818 1-216-833-11 METAL CHIP 10K 5% 1/10WR820 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR821 1-216-837-11 METAL CHIP 22K 5% 1/10WR822 1-249-417-11 CARBON 1K 5% 1/4WR823 1-245-468-21 METAL 180K 1% 1/4W
R824 1-216-839-11 METAL CHIP 33K 5% 1/10WR825 1-243-606-71 METAL OXIDE 1K 5% 3WR826 1-247-891-00 CARBON 330K 5% 1/4WR827 1-216-369-00 METAL OXIDE 1 5% 2WR828 1-243-606-71 METAL OXIDE 1K 5% 3W
R829 1-243-606-71 METAL OXIDE 1K 5% 3WR830 1-260-332-51 CARBON 2.2K 5% 1/2WR831 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R833 1-260-125-11 CARBON 150K 5% 1/2WR834 1-245-468-21 METAL 180K 1% 1/4W
R835 1-260-125-11 CARBON 150K 5% 1/2WR838 1-216-838-11 METAL CHIP 27K 5% 1/10WR839 1-216-864-11 SHORT CHIP 0R843 1-216-864-11 SHORT CHIP 0R844 1-218-867-11 METAL CHIP 6.8K 5% 1/10W
R846 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR847 1-216-833-11 METAL CHIP 10K 5% 1/10WR851 1-216-821-11 METAL CHIP 1K 5% 1/10WR852 1-218-871-11 METAL CHIP 10K 0.5% 1/10WR853 1-218-859-11 METAL CHIP 3.3K 0.5% 1/10W
R854 1-218-877-11 METAL CHIP 18K 0.5% 1/10WR855 1-218-883-11 METAL CHIP 33K 0.5% 1/10WR856 1-218-871-11 METAL CHIP 10K 0.5% 1/10WR859 1-218-883-11 METAL CHIP 33K 0.5% 1/10WR861 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R864 1-218-865-11 METAL CHIP 5.6K 0.5% 1/10WR865 1-216-821-11 METAL CHIP 1K 5% 1/10WR866 1-218-895-11 METAL CHIP 100K 0.5% 1/10WR868 1-249-393-11 CARBON 10 5% 1/4WR869 1-249-381-11 CARBON 1 5% 1/4W
R870 1-218-859-11 METAL CHIP 3.3K 0.5% 1/10WR871 1-243-692-71 METAL OXIDE 220 5% 1WR872 1-216-864-11 SHORT CHIP 0R873 1-216-841-11 METAL CHIP 47K 5% 1/10WR876 1-216-833-11 METAL CHIP 10K 5% 1/10W
R877 1-218-895-11 METAL CHIP 100K 0.5% 1/10WR878 1-216-349-00 METAL OXIDE 1 5% 1WR879 1-245-470-21 METAL 220K 1% 1/4WR880 1-245-470-21 METAL 220K 1% 1/4WR881 1-218-871-11 METAL CHIP 10K 0.5% 1/10W
R882 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR883 1-249-421-11 CARBON 2.2K 5% 1/4WR887 1-216-837-11 METAL CHIP 22K 5% 1/10WR888 1-218-887-11 METAL CHIP 47K 0.5% 1/10WR889 1-243-531-71 METAL OXIDE 100 5% 3W
R890 1-215-910-00 METAL OXIDE 68 5% 3WR891 1-249-385-11 CARBON 2.2 5% 1/4WR893 1-218-871-11 METAL CHIP 10K 0.5% 1/10WR895 1-218-859-11 METAL CHIP 3.3K 0.5% 1/10WR902 1-216-821-11 METAL CHIP 1K 5% 1/10W
R904 1-216-821-11 METAL CHIP 1K 5% 1/10WR905 1-216-840-11 METAL CHIP 39K 5% 1/10WR906 1-216-817-11 METAL CHIP 470 5% 1/10WR907 1-216-840-11 METAL CHIP 39K 5% 1/10WR908 1-216-840-11 METAL CHIP 39K 5% 1/10W
R909 1-216-840-11 METAL CHIP 39K 5% 1/10WR910 1-216-817-11 METAL CHIP 470 5% 1/10WR911 1-216-805-11 METAL CHIP 47 5% 1/10WR913 1-216-853-11 METAL CHIP 470K 5% 1/10WR914 1-216-853-11 METAL CHIP 470K 5% 1/10W
R915 1-216-849-11 METAL CHIP 220K 5% 1/10WR916 1-216-849-11 METAL CHIP 220K 5% 1/10WR917 1-218-285-11 METAL CHIP 75 5% 1/10WR918 1-216-805-11 METAL CHIP 47 5% 1/10WR919 1-216-813-11 METAL CHIP 220 5% 1/10W
R920 1-216-849-11 METAL CHIP 220K 5% 1/10WR921 1-216-849-11 METAL CHIP 220K 5% 1/10WR922 1-218-285-11 METAL CHIP 75 5% 1/10WR923 1-218-285-11 METAL CHIP 75 5% 1/10WR924 1-216-853-11 METAL CHIP 470K 5% 1/10W
A
– 58 –
The components identified by shadingand mark ! are critical for safety.Replace only with part number specified.
REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK
KV-21CL5KRM-W100
R925 1-216-809-11 METAL CHIP 100 5% 1/10WR926 1-216-809-11 METAL CHIP 100 5% 1/10WR927 1-216-809-11 METAL CHIP 100 5% 1/10WR928 1-218-285-11 METAL CHIP 75 5% 1/10WR929 1-218-285-11 METAL CHIP 75 5% 1/10W
R930 1-218-285-11 METAL CHIP 75 5% 1/10WR931 1-216-021-00 RES-CHIP 68 5% 1/10WR940 1-216-849-11 METAL CHIP 220K 5% 1/10WR941 1-216-849-11 METAL CHIP 220K 5% 1/10WR945 1-216-833-11 METAL CHIP 10K 5% 1/10W
R946 1-216-833-11 METAL CHIP 10K 5% 1/10WR947 1-216-839-11 METAL CHIP 33K 5% 1/10WR948 1-216-839-11 METAL CHIP 33K 5% 1/10WR949 1-216-833-11 METAL CHIP 10K 5% 1/10WR950 1-216-833-11 METAL CHIP 10K 5% 1/10W
R951 1-216-013-00 RES-CHIP 33 5% 1/10WR952 1-216-821-11 METAL CHIP 1K 5% 1/10WR953 1-216-853-11 METAL CHIP 470K 5% 1/10WR954 1-216-821-11 METAL CHIP 1K 5% 1/10WR957 1-218-285-11 METAL CHIP 75 5% 1/10W
R967 1-216-853-11 METAL CHIP 470K 5% 1/10WR970 1-216-853-11 METAL CHIP 470K 5% 1/10WR992 1-216-817-11 METAL CHIP 470 5% 1/10WR993 1-216-817-11 METAL CHIP 470 5% 1/10WR2646 1-249-381-11 CARBON 1 5% 1/4W
R2647 1-249-429-11 CARBON 10K 5% 1/4WR8003 1-216-809-11 METAL CHIP 100 5% 1/10WR8004 1-216-809-11 METAL CHIP 100 5% 1/10WR8005 1-218-871-11 METAL CHIP 10K 0.5% 1/10WR8009 1-218-867-11 METAL CHIP 6.8K 5% 1/10W
R8010 1-245-464-21 METAL 120K 1% 1/4WR8011 1-216-841-11 METAL CHIP 47K 5% 1/10WR8012 1-216-841-11 METAL CHIP 47K 5% 1/10WR8013 1-245-462-21 METAL 100K 1% 1/4WR9005 1-216-864-11 SHORT CHIP 0
R9013 1-216-809-11 METAL CHIP 100 5% 1/10WR9014 1-216-809-11 METAL CHIP 100 5% 1/10WR9016 1-216-809-11 METAL CHIP 100 5% 1/10WR9017 1-216-809-11 METAL CHIP 100 5% 1/10WR9018 1-216-809-11 METAL CHIP 100 5% 1/10W
R9019 1-216-809-11 METAL CHIP 100 5% 1/10WR9020 1-216-809-11 METAL CHIP 100 5% 1/10WR9021 1-216-809-11 METAL CHIP 100 5% 1/10WR9022 1-216-809-11 METAL CHIP 100 5% 1/10WR9023 1-216-809-11 METAL CHIP 100 5% 1/10W
R9025 1-216-809-11 METAL CHIP 100 5% 1/10WR9026 1-216-838-11 METAL CHIP 27K 5% 1/10WR9027 1-216-838-11 METAL CHIP 27K 5% 1/10WR9028 1-216-809-11 METAL CHIP 100 5% 1/10WR9030 1-216-809-11 METAL CHIP 100 5% 1/10W
R9031 1-216-809-11 METAL CHIP 100 5% 1/10WR9034 1-216-809-11 METAL CHIP 100 5% 1/10WR9035 1-216-809-11 METAL CHIP 100 5% 1/10WR9037 1-216-809-11 METAL CHIP 100 5% 1/10WR9050 1-216-864-11 SHORT CHIP 0
R9053 1-218-285-11 METAL CHIP 75 5% 1/10WR9057 1-216-809-11 METAL CHIP 100 5% 1/10WR9062 1-249-417-11 CARBON 1K 5% 1/4WR9063 1-211-981-11 METAL CHIP 33 0.5% 1/10W
<VARIABLE RESISTOR>
RV750 1-241-656-11 RES, ADJ, METAL FILM 110M
<RELAY>
RY600 ! 1-755-198-12 RELAY, AC POWER
<SWITCH>
S600 ! 1-571-433-31 SWITCH, PUSH (AC POWER)S800 1-572-707-11 SWITCH, LEVER
SWF100 1-579-273-11 FILTER, SURFACE WAVESWF101 1-767-873-11 FILTER, SURFACE WAVE
<TRANSFORMER>
T600 ! 1-456-354-11 LINE FILTER COILT602 ! 1-439-698-11 CONVERTER TRANSFORMER (SRT)T603 ! 1-456-354-11 LINE FILTER COILT800 1-435-374-11 TRANSFORMER, FERRITE (HDT)T801 ! 1-453-329-41 TRANSFORMER ASSY FLY BACK
(NX-4751//M3A4)
<THERMISTOR>
THP600! 1-804-530-11 THERMISTOR, POSITIVE
<TEST PIN>
TP02 1-536-354-00 POST PINTP03 1-536-354-00 POST PINTP04 1-536-354-00 POST PINTP601 1-536-354-00 POST PIN
<TUNER>
TU101 8-598-623-00 TUNER, FSS BTP-AC421
<VARISTOR>
VDR600 1-804-995-11 VARISTOR
<CRYSTAL>
X001 1-795-839-21 QUARTZ CRYSTAL UNIT
***********************************************************
* A-1405-418-A MOUNTED PWB (VAR), C***********************
4-382-854-01 SCREW (M3X8), P, SW (+)
<CAPACITOR>
C751 1-107-961-91 ELECT 10UF 20.00% 250VC752 1-115-350-51 CERAMIC 0.0047UF 2KVC754 1-107-651-11 ELECT 4.7UF 20.00% 250V
CA
– 59 –
The components identified by shadingand mark ! are critical for safety.Replace only with part number specified.
REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK
KV-21CL5KRM-W100
C781 1-107-651-11 ELECT 4.7UF 20.00% 250VC782 1-102-074-00 CERAMIC 0.001UF 10.00% 50V
C783 1-162-964-11 CERAMIC CHIP 0.001UF 10.00% 50VC786 1-162-964-11 CERAMIC CHIP 0.001UF 10.00% 50VC787 1-164-645-11 CERAMIC 1000PF 10.00% 500VC788 1-162-923-11 CERAMIC CHIP 47PF 5.00% 50VC789 1-162-923-11 CERAMIC CHIP 47PF 5.00% 50V
C790 1-162-923-11 CERAMIC CHIP 47PF 5.00% 50V
<CONNECTOR>
CN701 * 1-564-510-11 PLUG, CONNECTOR 7PCN703 * 1-564-508-11 PLUG, CONNECTOR 5PCN704 1-695-915-11 TAB (CONTACT)CN705 1-695-915-11 TAB (CONTACT)
<DIODE>
D750 8-719-908-03 GP08DD754 8-719-970-83 HSS82-TJD755 8-719-970-83 HSS82-TJD756 8-719-970-83 HSS82-TJD780 8-719-991-33 1SS133T-77
D781 8-719-991-33 1SS133T-77D782 8-719-069-55 DIODE UDZSTE-175.6B
<IC>
IC751 6-703-482-01 IC TDA6108AJF/N1
<JACK>
J751 ! 1-451-544-11 SOCKET, CRT
<COIL>
L780 1-410-667-31 INDUCTOR 22UHL781 1-414-186-31 INDUCTOR 33UHL782 1-414-186-31 INDUCTOR 33UHL783 1-414-186-31 INDUCTOR 33UH
<RESISTOR>
R713 1-216-864-11 SHORT CHIP 0R752 1-216-819-11 METAL CHIP 680 5% 1/10WR753 1-216-819-11 METAL CHIP 680 5% 1/10WR754 1-216-819-11 METAL CHIP 680 5% 1/10WR756 1-219-746-11 METAL 1K 5% 1/2W
R757 1-219-746-11 METAL 1K 5% 1/2WR758 1-219-746-11 METAL 1K 5% 1/2WR763 1-260-087-11 CARBON 100 5% 1/2WR764 1-260-087-11 CARBON 100 5% 1/2WR765 1-260-087-11 CARBON 100 5% 1/2W
R773 1-260-132-11 CARBON 560K 5% 1/2WR774 1-215-912-11 METAL OXIDE 150 5% 3WR780 1-260-131-11 CARBON 470K 5% 1/2WR781 1-243-950-71 RES, OXIDE METAL FILM 0.56R783 1-260-087-11 CARBON 100 5% 1/2W
R794 1-249-377-11 CARBON 0.47 5% 1/4WR795 1-260-352-11 CARBON 100K 5% 1/2W
<VARIABLE RESISTOR>
RV750 1-241-656-11 RES, ADJ, METAL FILM 110M
************************************************************
<ACCESSORIES AND PACKING MATERIALS>******************************************
* 4-088-869-01 BAG, PROTECTION* 4-096-211-01 INDIVIDUAL CARTON* 4-096-212-01 CUSHION, UPPER* 4-096-215-01 CUSHION, LOWER
4-098-284-11 MANUAL, INSTRUCTION
************************************************************
<REMOTE COMMANDER BATTERY COVER>*****************************************
1-477-861-11 STANDARDTYPE COMMANDER RM-W100
C
9-872-377-01
Sony CorporationSony Technology Malaysia Sdn. Bhd.
Visual ProductsEnglish
2003.9
4-098-284-11(1)
R
© 2003 Sony Corporation
Instruction Manual
Инструкции за експлоатация
Návod k obsluze
Kezelési útmutató
Instrukcja obsługi
Инструкция по эксплуатации
GB
BG
CZ
HU
PL
RU
SKNávod na obsluhu
FD TrinitronColour Television
KV-21CL5K
GB
3
IntroductionThank you for choosing this Sony FD Trinitron Colour Television.
Before operating the TV, please read this manual thoroughly and retain it for future reference.
Symbols used in the manual:
• Important information.
• Information on a feature.• 1,2...Sequence of instructions.
• Shaded buttons on the remote control show you the buttons you have to press to follow the sequence of the instructions.
• Informs you of the result of instructions.
Table of ContentsIntroduction............................................................................................................................................. 3Safety Information .... ..............................................................................................................................4
OverviewOverview of Remote Control Buttons .... .............................................................................................5Overview of TV Buttons ........................................................................................................................ 6
InstallationInserting Batteries into the Remote Control ....................................................................................... 6Connecting an Aerial and VCR ............................................................................................................ 6
First Time OperationSwitching On the TV and Automatically Tuning .............................................................................. 7
Menu SystemIntroducing and Using the Menu System ........................................................................................... 9
Picture................................................................................................................................................. 9 Sound................................................................................................................................................ 11 Timer................................................................................................................................................. 12 Channel Set Up ............................................................................................................................... 13 Set Up ............................................................................................................................................... 15
Teletext ................................................................................................................................................ 16
Additional InformationConnecting Optional Equipment ....................................................................................................... 17Using Optional Equipment ................................................................................................................. 17Specifications......................................................................................................................................... 18Troubleshooting.................................................................................................................................... 19
Table of Contents
4
Safety Information
This set is to operate on a 220-240V AC supply only. Take care not to connect too many appliances to the same power socket as this could result in fire or electric shock.
For environmental and safety reasons, it is recommended that the TV set is not left in standby mode when not in use. Disconnect from the mains.
Never push objects of any kind into the set as this could result in a fire or electric shock. Never spill liquid of any kind on the set. If any liquid or solid object does fall through, do not operate the TV. Have it checked immedi-ately by qualified personnel.
Do not open the cabinet and the rear cover of the TV. Refer to qualified service personnel only.
For your own safety, do not touch any part of the TV, power lead or aerial lead during lightning storms.
To prevent fire or shock hazard, do not expose the TV to rain or moisture.
Do not cover the ventilation openings of the TV. For ventilation, leave a space of at least 10cm all around the set.
Never place the TV in hot, humid or excessively dusty places. Do not install the TV where it may be exposed to mechanical vibrations.
To prevent fire, keep inflammable objects or naked lights (e.g. candles) away from the TV.
Clean the screen and cabinet with a soft, lightly dampened cloth. Do not use any type of abrasive pad, alkaline cleaner, scouring powder or solvent, such as alcohol or benzine, or antistatic spray. As a safety precaution, unplug the TV before cleaning it.
Pull out the power lead by the plug. Do not pull on the power lead itself.
Take care not to place heavy objects on the power lead as this could result in damage.We recommend you wind any excess lead around the holders provided on the rear of the TV.
Place the TV on a secure stable stand. Do not allow children to climb on to it. Do not place the TV on its side or face up.
Unplug the power lead before moving the TV. Avoid uneven surfaces, quick steps or excessive force. If the set has been dropped or damaged, have it checked immediately by qualified service personnel.
Do not cover the ventilation openings of the TV with items such as curtains or newspapers, etc.
Safety Information
GB
5
Overview of Remote Control Buttons
Besides TV functions, all coloured buttons as well as green symbols are also used for Teletext operation. For more details, please refer to “Teletext” section of this instruction manual (see page 16).
TV
1 2 3
4 6
7 8 9
0
5
MENU
PROG
A/B
Displaying on screen informationPress to display all on-screen indications. Press again to cancel.Muting the soundPress to mute TV sound.Press again to restore the sound.Selecting input sourcePress repeatedly until the desired input symbol of the source appears on the TV screen.This button only works in Teletext mode.Function A/B associated to this button does not work with this TV.Selecting channelsPress to select channels.For double-digit programme numbers, enter the second digit within 3 seconds.
orPress -/-- and then the first and second digit.If you enter an incorrect first digit, this should be corrected by entering another digit (0-9) and then selecting -/-- button again to enter the programme number of your choice.On timerSet TV to switch on automatically.Sleep timerSet TV to switch off automatically.This button does not work on this set.Adjusting TV volumePress to adjust the volume of the TV.Selecting sound modePress repeatedly to change the sound mode.
To temporarily switch off TVPress to temporarily switch off TV (the standby indicator 1 on TV lights up). Press again to switch on TV from standby mode.
To save energy we recommend switching off completely when TV is not in use.
After 15 minutes without a signal and without any button being pressed, the TV switches automatically into standby mode.
Selecting TV modePress to switch off teletext or video input.Back to the channel last watchedPress to watch the last channel selected (watched for at least 5 seconds).Selecting channelsPress to select the next or previous channel.Displaying the menu systemPress to display the menu on the TV screen. Press again to remove the menu display from the TV screen.Menu selection
Scroll Up Scroll Down Previous menu or selection Next menu or selection Confirm your selection
Selecting TeletextPress to switch on teletext.Selecting screen formatPress to view programmes in 16:9 mode. Press again to return to 4:3 mode.Selecting picture modePress repeatedly to change the picture mode.
Overview
6
Overview of TV Buttons
Inserting Batteries into the Remote Control Make sure you insert the supplied batteries using the correct polarities.Always remember to dispose of used batteries in an environmental friendly way.
Connecting an Aerial and VCR Connecting cables are not supplied.
Displaying the menu system
Selecting Input source
Volume control buttons
Programme Up or Down buttons (selects TV channels)
Lift up the door flap with mark to reveal the control panel.
Standby indicator
On/Offswitch
Video Input jack
Audio Input jacks
Headphone jack
OUT IN
or
VCR
Scart lead is optional.
For more details of VCR connection, please refer to the section “Connecting Optional Equipment” of this instruction manual (see page 17).
Overview-Installation
GB
7
Switching On the TV and Automatically Tuning The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose the language of the menu screen, 2) choose the country in which you wish to operate the TV, 3) search and store all available channels (TV Broadcast), 4) change the order in which the channels (TV Broadcast) appear on the screen and 5) adjust the picture slant.However, if you need to change any of these settings at a later date, you can do that byselecting the appropriate option in the (Set Up) or (Channel Set Up) menu.
1 Connect the TV plug to the mains socket (220-240 V AC, 50 Hz). Press ! On/Off button on the TV set to switch on the TV. The first time you switch on the TV, a Language menu displays automatically on the TV screen.
2 Press 2 +/– button on the top control panel to select the language, then press t to confirm your selection. From now on all menus will appear in the selected language.
3 The Country menu appears automatically on the TV screen. Press 2 +/– button to select the country in which you will operate the TV set, then press t to confirm your selection.
• If the country in which you want to use the TV set does not appear in the list, select “-” instead of a country.
• In order to avoid wrong teletext characters for Cyrillic languages we recommend to select Russia in the case that your own country does not appear in the list.
4 Ensure the aerial is connected as instructed, then press t to confirm. The TV automatically starts searching and storing all available broadcast channels for you.
•This procedure could take some minutes. Please be patient and do not press any buttons, otherwise automatic tuning will not be completed.
•If no channels were found during the auto tuning process, a new menu appears automatically on the screen asking you to connect the aerial. Please connect the aerial (see page 6) and press t. The auto tuning process will start again.
Language Svenska
EnglishNederlandsFrançais
Select language
Norsk
Confirm [t]Select [–2+]
Country
Schweiz/Suisse/SvizzeraItalia
Select Country
NorgeSverige
–
Confirm [t]Select [–2+]
Do you want to start automatic
First please connect aerial
tuning?
No
Initial Set Up
Yes
Confirm [t]Select [–2+] End
Auto Tuning
No channel found
Please connect aerial
OK
Confirm [t] End
First Time Operation
continued...
8
5 After all available channels are captured and stored, the Programme Sorting menu appears automatically on the screen enabling you to change the order in which the channels appear on the screen.
a) If you wish to keep the broadcast channels in the tuned order, press MENU.
b) If you wish to store the channels in a different order:1 Press 2 +/– to select the programme number with the
channel (TV Broadcast) you wish to rearrange, then press t.
2 Press 2 +/– to select the new programme number position for your selected channel (TV Broadcast), then press t.
3 Repeat steps b) 1 and b) 2 if you wish to change the order of the other channels.
6 Because of the earth’s magnetism, the picture might slant. The Picture Rotation menu allows you to correct the picture slants if it is necessary. a) If it is not necessary, press t.b) If it is necessary, press 2 +/– to correct any slant of the
picture. Finally press t to store.
•To allow this menu to appear again, press and hold MENU button at top control panel for about 5 seconds.
• The MENU, and / / / buttons on the remote control can also be used for the operations above.
Your TV is now ready for use.
Programme SortingProgramme:
Select channelConfirm [t]Select [–2+] Exit
TVETVE2TV3
04 C33
010203
Programme SortingProgramme:
Select new position
Confirm [t]Select [–2+] Exit
01 TVE
02 TVE203 TV304 C33 03 TV3
Picture Rotation
Confirm [t] EndSelect [–2+]
[2+][–2]
First Time Operation
GB
9
Introducing and Using the Menu System Your TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system:
1 Press MENU to switch the menu on.
2 • To highlight the desired menu or option, press or .• To enter to the selected menu or option, press .• To return to the last menu or option, press .• To alter settings of your selected option, press / / or .• To confirm and store your selection, press .
3 Press MENU to remove the menu from the screen.
PictureThe “Picture” menu allows you to alter the picture adjustments.
To do this:After selecting the item you want to alter, press , then press / /
or repeatedly to adjust it and finally press to store the new adjustment.This menu also allows you to customize the picture mode based on the programme you are watching:
Mode Live (for enhanced picture contrast and sharpness).Movie (for a finely detailed picture).Game (for a picture from game).Personal (for your own custom settings).
Picture Adjustment
Contrast Press or to reduce picture contrast.Press or to enhance picture contrast.
Brightness Press or to darken the picture.Press or to brighten the picture.
Colour Press or to decrease colour intensity.Press or to increase colour intensity.
Picture
Intell igent Picture: OnPicture Adjustment
Mode: Live
ConfirmSelect End
Picture
Intell igent Picture: OnPicture Adjustment
Mode: Live
ConfirmSelect End
Menu System
continued...
10
If any changes are made to “Picture Adjustment”, “Mode” will switch automatically to “Personal” and the new setting will be stored as “Personal”.
Hue Press or to decrease the green tones.Press or to increase the green tones.
Hue can only be adjusted for NTSC colour signal (e.g. USA video tapes).
Sharpness Press or to soften the picture.Press or to sharpen the picture.
Reset Select to reset the picture to the factory preset levels.
Intelligent Picture
On/Off Select to optimize the picture quality.E.g. reduce noise level when signal is weak.
Menu System
GB
11
SoundThe “Sound” menu allows you to alter the sound adjustments.
To do this:After selecting the item you want to alter, press , then press / / or
repeatedly to adjust it and finally press to store it.
Mode Dynamic (dynamic and clear sound that emphasizes both the low and high tones).Drama (sound that emphasizes voice and high tones).Soft (soft, natural and relaxing sound).Personal (flat and smooth sound that can be customized by users).
Sound Adjustment
Treble Press or to decrease higher-frequency sounds.Press or to increase higher-frequency sounds.
Bass Press or to decrease lower-frequency sounds.Press or to increase lower-frequency sounds.
Reset Select to reset the sound to the factory preset.
Balance Press or to emphasize the left speaker.Press or to emphasize the right speaker.
Auto Volume
On/OffVolume level of the channels will stay the same, independent of the broadcast signal (e.g., in the case of advertisements).
Select Confirm End
Sound
Mode:
Balance
Dynamic
Auto Volume: Off
Sound Adjustment
Select Confirm End
Sound
Mode:
Balance
Dynamic
Auto Volume: Off
Sound Adjustment
Menu System
12
TimerThe “Timer” menu allows you to alter the timer adjustments.
Sleep Timer The “Sleep Timer” option in the “Timer” menu allows you to select a time period for the TV to switch itself automatically into the standby mode.
To do this:After selecting the option, press , then press or to set the time period delay (max. of 1 hour 30 minutes) and finally press to store.
• While watching the TV, you can press the button on the remote control to display the time remaining.
• One minute before the TV switches itself into standby mode, “TV will turn off soon” is displayed on the TV screen automatically.
On Timer The “On Timer” option in the “Timer” menu allows you to select a time period for the TV to switch itself automatically on from standby mode.
To do this:After selecting the option, press , then press or to set the time period delay (max. of 12 hours) and finally press to store. Finally press the standby button &/1 on the remote control. After the selected length of time, the TV switches on automatically and “On Timer” will appear on the screen.
• The standby indicator 1 on the TV set lights up in amber to indicate that “On Timer” is active.
• Any loss of power will cause these settings to be cleared.• If no buttons are pressed for more than one hour after the
TV is turned on using the “On Timer”, the TV automatically goes into standby mode.
Timer
On Timer:Sleep Timer: Off
Off
Select Confirm End
Timer
On Timer:Sleep Timer: Off
Off
Select Confirm End
Menu System
GB
13
Channel Set UpThe “Channel Set Up” menu allows you to preset channels on this TV.
Auto Tuning The “Auto Tuning” option in the “Channel Set Up” menu allows you to automatically search and store all available TV channels.
To do this:After selecting the option, press and then proceed in the same way as in step 4 of the section “Switching On the TV and Automatically Tuning” (see page 7).
Programme Sorting
The “Programme Sorting” option in the “Channel Set Up” menu allows you to change the order in which the channels (TV Broadcast) appear on the screen.
To do this:After selecting the option, press and then proceed in the same way as in step 5b) of the section “Switching On the TV and Automatically Tuning” (see page 8).
Programme Labels The “Programme Labels” option in the “Channel Set Up” menu allows you to name a channel using up to five characters (letters or numbers).
To do this:1 After selecting the option, press . Press or to select the
programme number with the channel you wish to name, then press .
2 Press . With the first element of the label column highlighted, press or to select a letter or number (select “_” for a blank), then press to confirm this character. Select the other four characters in the same way. Finally press to store.
Select End
Channel Set Up
Programme LabelsManual Programme Preset
Programme SortingAuto Tuning
Confirm Select End
Channel Set Up
Programme LabelsManual Programme Preset
Programme SortingAuto Tuning
Confirm
Menu System
continued...
14
ManualProgrammePreset
The “Manual Programme Preset” option in the “Channel Set Up” menu allows you to:a) Preset channels or a video input source one by one to the
programme order of your choice.
To do this:1 After selecting the “Manual Programme Preset” option, press
. Highlight the Programme option and press . Press or to select a programme number on which you want to preset
the channel (for VCR, select programme number “0”), then press .
The following option is only available depending on the country you have selected in the “Language/Country” menu.
2 After selecting the System option, press . Press or to select the TV Broadcast system (B/G for western European countries or D/K for eastern European countries), then press
.
3 After selecting the Channel option, press . Press or to select the channel tuning (C for terrestrial channels or S for cable channels). Next press . After that, press the number buttons to directly enter the channel number of the TV Broadcast. If you do not know the channel number, press or
to search for it. When you tune the desired channel, press twice to store.
Repeat all the above steps to tune and store more channels.
b) Normally the automatic fine tuning (AFT) will give the best possible picture, however you can manually fine tune the TV to obtain a better picture if the picture is distorted.
To do this:While watching the channel (TV Broadcast) you wish to fine tune, select the AFT option and press . Next press or to adjust the fine tuning between -15 and +15. Finally press twice to store.
c) Skip any unwanted programme numbers when they are selected with the PROG +/– button.
To do this:Highlighting the Programme option, press PROG +/– to select the programme number you want to skip. When the programme you want to skip appears on the screen, select the Skip option and press . Next press or to select Yes. Finally press twice to confirm and store.
To cancel this function afterwards, select No instead of Yes in the step above.
Menu System
GB
15
Set UpThe “Set Up” menu allows you to alter various options on this TV.
Language/Country
The “Language/Country” option in the “Set Up” menu allows you to select the language that the menus are displayed in.
To do this:After selecting the option, press and then proceed in the same way as in steps 2 and 3 of the section “Switching On the TV and Automatically Tuning” (see page 7).
Picture Rotation Because of the earth’s magnetism, the picture might slant. In this case, you can correct the picture slant by using the option “Picture Rotation” in the “Set Up” menu.
To do this:After selecting the option, press . Press or ( or ) to correct any slant of the picture. Finally press to store.
RGB Centring When connecting an RGB source, such as a “PlayStation”, you may need to readjust the horizontal position of the picture. In that case, you can readjust it through the “RGB Centring” option in the “Set Up” menu.
To do this:While watching an RGB source, select the “RGB Centring” option and press . Press or to adjust the centre of the picture between -10 and +10. Finally press to confirm and store.
Select End
Set Up
RGB Centring: 0Picture RotationLanguage/Country
ConfirmSelect End
Set Up
RGB Centring: 0Picture RotationLanguage/Country
Confirm
Menu System
16
TeletextTeletext is an information service transmitted by most TV stations. The index page of the Teletext service (usually page 100) gives you information on how to use the service. To operate Teletext, use the remote control buttons as indicated below.
Be sure to use a channel (TV Broadcast) with a strong signal, otherwise Teletext errors may occur.
To switch on Teletext: After selecting the TV channel which carries the Teletext service you wish to view, press .
To select a Teletext page:Input 3 digits for the page number, using the numbered buttons.• If you have made a mistake, retype the correct page number.• If the counter on the screen continues searching, it is because this page is not available. In that case,
input another page number.
To check the contents of a Teletext service:Press .
To access the next or preceding page:Press or .
To superimpose teletext on to the TV:Whilst you are viewing Teletext, press . Press it again to cancel Teletext mode.
To freeze a teletext page:Some Teletext pages have sub-pages which follow on automatically. To stop them, press . Press it again to cancel the freeze.
To reveal concealed information (e.g., answer to a quiz):Press . Press it again to conceal the information.
To enlarge the Teletext display:Press . Each time you press , the Teletext display changes as follows: Enlarge upper half t Enlarge lower half t Normal size.
To stand by for a Teletext page while watching a TV program.1 Enter the Teletext number that you want to refer to, then press . 2 When the page number is displayed, press to show the Text.
To switch off Teletext: Press .
FastextFastext service lets you access pages with one push of a button.While you are in Teletext mode and Fastext is broadcast, a colour coded menu appears at the bottom of the teletext page. Press the colour button (red, green, yellow or blue) to access the corresponding page.
TELETEXTIndexProgrammeNewsSportWeather
25153101
98
TELETEXTIndexProgrammeNewsSportWeather
25153101
98
TELETEXTIndexProgrammeNewsSportWeather
25153101
98
TELETEXTIndexProgrammeNewsSportWeather
25153101
98
TELETEXTIndexProgrammeNewsSportWeather
25153101
98
TELETEXTIndexProgrammeNewsSportWeather
25153101
98
TELETEXTIndexProgrammeNewsSportWeather
25153101
98
TELETEXTIndexProgrammeNewsSportWeather
25153101
98
Teletext
GB
17
Connecting Optional EquipmentUsing the following instructions, you can connect a wide range of optional equipment to your TV set (connecting cables are not supplied).
Connecting a VCR: To connect a VCR, please refer to the section “Connecting an aerial and VCR” of this instruction manual. We recommend you connect your VCR using a Scart lead. If you do not have a Scart lead, tune in the VCR test signal to the TV programme number “0” by using the “Manual Programme Preset” option (for details on how to manually programme these presets, see page 14, step a).Refer to your VCR instruction manual to find out how to find the output channel of your VCR.
Using Optional Equipment1 Connect your equipment to the designated TV socket, as indicated above.
2 Switch on the connected equipment.
3 To watch the picture of the connected equipment, press repeatedly until the correct input symbol appears on the screen.
4 Press button on the remote control to return to the normal TV picture.
Symbol Input Signals
1 •Audio / video input signal through the Scart connector C
1 •RGB input signal through the Scart connector C. This symbol appears only if a RGB source has been connected.
2 •Audio / video input signal through the Scart connector D.
2 •S Video input signal through the Scart connector D.
3 •Video input signal through the phono socket A and Audio input signal through B.
A B
1 2
C
8mm/Hi8/DVCcamcorder DVD/VCR
“PlayStation”*
decoder
When you connect the headphones, the TV speakers will automatically be muted.
* “PlayStation” is a productof Sony Computer Entertainment, Inc.
* “PlayStation” is a trademark of Sony Computer Entertainment, Inc.
DVD
VCR
D
Additional Information
18
SpecificationsTV system: Depending on your country selection:B/G/H, D/K
Colour system:PAL, SECAM NTSC 3.58, 4.43 (only Video In)
Channel Coverage:VHF: E2-E12UHF: E21-E69CATV: S1-S20HYPER: S21-S41D/K: R1-R12, R21-R69
Picture Tube:Flat Display FD Trinitron
Rear Terminalsi1/ 21-pin Scart connector
(CENELEC standard) including audio/video input, RGB input, TV audio/video output.
i2/ 21-pin Scart connector (CENELEC standard) including audio/video input, S video input, monitor audio/video output.
Front Terminalst3 video input – phono jack
3 audio input – phono jacksheadphones jack
Sound Output:2 x 10 W (music power)2 x 5 W (RMS)
Power Consumption:66 W
Standby Power Consumption:< 1 W
Dimensions (w x h x d):Approx. 630 x 460 x 492 mm
Weight:Approx. 25 kg
Accessories supplied:1 Remote Control (RM-W100)2 Batteries (IEC designated)
Other features:•Teletext, Fastext, TOPtext•Sleep Timer•On Timer
Design and specifications are subject to change without notice.
Ecological Paper- Totally Chlorine Free
Additional Information
GB
19
TroubleshootingHere are some simple solutions to the problems which may affect the picture and sound.
In case of problems, have your TV serviced by qualified personnel. Never open the casing yourself.
Problem Solution
No picture (screen is dark) and no sound.
•Check the aerial connection.•Plug the TV in and press the ! button on the front of
TV. •If the standby indicator 1 is on, press &/1 button on
the remote control.•Press the ! button on the front of the TV to switch off
the TV for about 5 seconds, then switch it on again.
Poor or no picture (screen is dark), but good sound.
•Using the menu system, select the “Picture Adjustment” menu and select “Reset” to return to the factory settings (see page 9).
No picture or no menu information from equipment connected to the Scart connector.
•Check that the optional equipment is on and press repeatedly on the remote control until the correct
input symbol is displayed on the screen (see page 17).
Good picture, no sound. •Press the + button on the remote control. •Check that headphones are not connected.
No colour on colour programmes. •Using the menu system, select the “Picture Adjustment” menu and select “Reset” to return to factory settings (see page 9).
Distorted picture when changing programmes or selecting teletext.
•Turn off any equipment connected to the Scart connector on the rear of the TV.
Wrong characters appear when viewing teletext.
•Using the menu system, enter the “Language/Country” option in the “Set Up” menu and select the country in which you operate the TV set. For Cyrillic languages, we recommend to select Russia in the case that your own country does not appear in the list (see page 15).
Picture slanted. •Using the menu system, select the “Picture Rotation” option in the “Set Up” menu to correct the picture slant (see page 15).
Noisy picture when viewing a TV channel.
•Using the menu system, select the “Manual Programme Preset” menu and adjust Fine Tuning (AFT) to obtain better picture reception (see page 14).
•Using the menu system, select the “Intelligent Picture” option in the “Picture” menu and select “On” to reduce the noise in the picture (see page 9).
Remote control does not function. •Replace the batteries.
The standby indicator 1 on the TV flashes red.
•Contact your nearest Sony service centre.
Additional Information
Recommended