View
269
Download
0
Category
Preview:
Citation preview
K5 24-4700Riser Plate for GoldTop and GoldTop 2-Speed in specific International applications.
Fan ClutCh Guide
Post-2001 sPring EngagEd
Save Time & Money!With the Ultimate Fan Clutch Rebuild Kit
GoldTop® Rebuild Kit is unmatched by any competitors
(new or remanufactured) & packs over
5,000 inch-pounds of Torque!
Highest torque ratingWith over 5,000 inch-pounds of torque, the GoldTop® Rebuild Kit will handle nearly all fan blades!
Less time to installOur exclusive design combines nine separate components into ONE FINAL ASSEMBLY – this dramatically reduces installation time and installation errors.
Higher Quality internal Components • Kevlar impregnated friction material • Cast on cast construction reduces corrosion and wear • Elimination of one seal equals one less leak path • 4-point urethane seal
Fail-safe designInnovative design that will AUTOMATICALLY LOCK UP fan clutches when the friction material nears the end of its life.
Lower CostUpgrading your fan clutch is as simple as installing the GoldTop® Rebuild Kit. • Lower cost vs. new • Less failures • Less time to install • Lower cost vs. remanufactured
CoMParE to tHE aLtErnatiVE
Kit Masters’ Patented GoldTop® reduces nine components
into one component assembly saving significant installation time and reducing the risk of
installation errors
K5 14-256 • 2.56” Fan Pilot • 2 Pulley Bearings
K5 14-256-1 • Same as 14-256, but with
a single pulley bearing.
K5 14-200 • 2” Fan Pilot
K5 14-500 • 5” Fan Pilot
Kit Masters kits to rebuild Horton® fan clutches
K5 14-sBLSeal, Bearing & Lining Kit
K5 14-sSeal Kit
K5 14-LLining Kit
Cata
lOG
nuM
BeR
18
www.midwestwheel.com
Order NLINE™
www.midwestwheel.com
Order NLINE™
dM advantage® DMA Quick KitsSuper KitsDM Advantage® Quick Kits are DMA Super Kits, used to upgrade legacy technology Horton DriveMaster® On/Off Fan Drives to DM Advantage technology. They also repair DM Advantage On/Off products that provide the industry’s smoothest fan drive engagements, proven in millions of miles of OE applications.
Quick Kits are engineered with pre-assembled components for faster and easier installation compared to previous generation Horton DMA Super Kits. Like all Genuine Horton Super Kits, they contain everything needed to completely rebuild fan drives, including: • Premium, double-row angular contact (DRAC) sheave bearing
• Improved air cartridge seal • Long-wearing friction liner for added reliability and reduced maintenance
Beware of low quality copies of Horton repair kits that have not been approved for OE applications. Choose wisely. Choose genuine Horton products.
» Fail-safe design for long-life performance » increased reliability in high horsepower applications
» Easy to install and maintain » reference the Horton online catalog (repair options) if you have questions as to what kit will fit a specific fan drive
Quick Kit: Ho Q995575 Notes:P/N HO Q995568 includes 39 mm DRAC bearing (includes air cap)
P/N HO Q995669 includes 30.2 mm DRAC bearing (does not include air cap)
P/N HO Q995575 includes additional bearing spacers
Premium Bearing vs. deep-groove Hub BearingdM advantage Bearing • Double-row angular contact (DRAC) bearing (1 needed) • 14 rolling elements per row • Highest load capacity • High contact angle – withstands more thrust load • Dual-lip Viton® seals • Highly heat-resistant grease • Single, double-row bearing (P/N HO Q995568)
45 mm ID x 85 mm OD x 39 mm length • Single, double-row bearing (P/N HO Q995669)
45 mm ID x 85 mm OD x 30.2 mm length
Competitive Bearing • Deep-groove bearings • 9 rolling elements per row • Low load capacity • Not preloaded • Two, single-row bearings
45 mm ID x 85 mm OD x 30.2 mm length
Quick Kits: Ho Q995568, Ho Q995669
K5 24-256 K5 24-256-1
If your OEM kit number is followed by one of the following numbers, also use the appropriate stud kit (ex: 995547-200 requires Stud Kit 150SK):oEM Use stud Kit # oEM Use stud Kit # oEM Use stud Kit # oEM Use stud Kit #-200 150SK -275 250SK -350 300SK -475 400SK-250 200SK -300 275SK -400 350SK
aLL oF tHE BEnEFits oF a goLdtoP® in a 2-sPEEd2-Speed GoldTop® is unmatched by any competitors (new or remanufactured) & packs over
5,000 inch-pounds of Torque!
Kit Contains BotH 2.56” & 5” Fan PiLotsThe 2-Speed GoldTop’s innovative design allows you to transform
the standard 2.56” pilot into a 5” pilot (if needed) by simply installing a pilot adapter ring and six new fan studs (included). No
need to replace your fan or buy a different 2-Speed kit.
2.56” Fan Pilot (standard) Easily converted to 5” Fan Pilot
reman Fan Clutch rebuild KitsKit Masters # K5 98601 K5 14-256Horton # Ho 79a8601 Ho Q995568application Kenworth ISX
Peterbilt ISXoEM # 79A8601, 98601, 988601, 989835, 98A8601, 998601, 999835, 99A8601,
F17-6005-5022, F17-6005-5132, F17-6011-5130, F17-6011-5132
reman Fan Clutch rebuild KitsKit Masters # K5 99154 K5 14-256Horton # Ho 79a9154 Ho Q995568application Kenworth ISX
Peterbilt ISXoEM # 799154, 79a9154, 989154, 999154, f17-1000-100
reman Fan Clutch rebuild KitsKit Masters # K5 99188 K5 14-256 & K5 150sKHorton # Ho 79a9515 Ho Q995568application International ISXoEM # 799188, 79a9515, 989188, 989515, 98a9515, 999188, 999515,
99a9515, HOR99A9515
K5 24-4700Riser Plate for GoldTop and GoldTop 2-Speed in specific International applications.
reman Fan Clutch rebuild KitsKit Masters # K5 99205 K5 14-256Horton # Ho 79a9205 Ho Q995568application Peterbilt ISXoEM # 799205, 79a9205, 79A9205RMAN, 989205, 999205, f17-1000-102
reman Fan Clutch rebuild KitsKit Masters # K5 99261 K5 14-256Horton # Ho 79a9261 Ho Q995568application International ISMoEM # 3578995c91, 799261, 79a9261, 989261, 98a9261, 999261, 99a9261
reman Fan Clutch rebuild KitsKit Masters # K5 99782-2 K5 24-256
Horton # Ho 79a8202, Ho 79a9782 Ho Q995582application Kenworth ISX 15
Peterbilt ISX 15oEM # 79A8202, 79A9782, 98A9782, 99A9782, F176017M03, F17-
6017M03, 995862, 99586-2
reman Fan Clutch rebuild KitsKit Masters # K5 99853 K5 14-256-1Horton # Ho 799853 Ho 994902application Freightliner ISC
Sterling ISCoEM # 999853, 989853, 799853
reman Fan Clutch rebuild KitsKit Masters # K5 99187 K5 14-256Horton # Ho 99a9878 (new only) Ho Q995568application International ISXoEM # 999187, 989187, 3565224c92, 989878, 999878, 99a9878, 98A9878,
3565224C94
reman Fan Clutch rebuild KitsKit Masters # K5 99291 K5 14-256 & K5 300sKHorton # Ho 79a9291 Ho Q995568application Freightliner C7, C9oEM # 799291, 79a9291, 989291, 999291
reman Fan Clutch rebuild KitsKit Masters # K5 99298 K5 14-256Horton # Ho 79a9298 Ho Q995568application Freightliner C11 ACERT, C13 ACERT
Sterling C11 ACERT, C13 ACERToEM # 799298, 799323, 79a9298, 79a9323, 989298, 989323, 989342,
98a9323, 999298, 999323, 999342, 99a9298, 99a9323
reman Fan Clutch rebuild KitsKit Masters # K5 99801 K5 14-256Horton # Ho 79a9801 Ho Q995568application Kenworth Cummins ISXoEM # 79a9801, 989801, 98A9801, 999801, 99a9801, f17-1000-114
reman Fan Clutch rebuild KitsKit Masters # K5 99897 K5 14-256Horton # Ho 79a9897 Ho Q995568application Kenworth ISX
Peterbilt ISXoEM # 79a9897, 989831, 989848, 989890, 989897, 98a9897, 999831,
999848, 999890, 999897, 99a9897, f17-1003-5112, f17-6005-5012, f17-6005-5122, f17-6011-5120, f17-6011-5122
reman Fan Clutch rebuild KitsKit Masters # K5 99334 K5 14-256Horton # Ho 79a9334 Ho Q995568application Peterbilt C15 ACERT, C16 ACERToEM # 799334, 79a9334, 989334, 98a9334, 999334, 99a9334, f17-1000-
317, f17-6013-317, M6X3050
reman Fan Clutch rebuild KitsKit Masters # K5 99346 K5 14-256Horton # Ho 79a9437 Ho Q995568application Kenworth C15 ACERT, C16 ACERToEM # 799346, 799437, 79a9346, 79a9437, 989346, 989437, 98a9346,
98A9437, 999346, 999437, 99a9346, 99a9437, f17-1000-320, F17-1000-337
reman Fan Clutch rebuild KitsKit Masters # K5 99361 K5 14-256Horton # Ho 79a9361 Ho Q995568application Kenworth C15, C16oEM # 799361, 79a9361, 989340, 989361, 98a9361, 999340, 999361,
99a9361, F17-1000-319, f17-1000-325
reman Fan Clutch rebuild KitsKit Masters # K5 99809 K5 14-256Horton # Ho 79a9809 Ho Q995568application Peterbilt C15oEM # 799809, 79a9809, 989809, 999809, 99a9809, f17-1000-329, F17-
6013-329, M6X0886
reman Fan Clutch rebuild KitsKit Masters # K5 99103 K5 14-256Horton # Ho 79a9103 Ho Q995568application Peterbilt 3406E, 3406, C15, C16oEM # 05-25159-014, 799103, 79a9103, 989103, 999103, 99a9103
reman Fan Clutch rebuild KitsKit Masters # K5 99360 K5 14-256Horton # Ho 799360 Ho Q995568application Kenworth C15 ACERT, C16 ACERToEM # 799360, 79a9360, 989360, 98a9360, 999360, 99a9360, F17-1000-324
reman Fan Clutch rebuild KitsKit Masters # K5 99834 K5 14-256Horton # Ho 79a9898 Ho Q995568application Kenworth C15
Peterbilt C15oEM # 79a9898, 989834, 989891, 989898, 98A9898, 999834, 999891,
999898, 99a9898, F17-6005-1011, F17-6005-1061, F17-6005-1071, F17-6011-1071
reman Fan Clutch rebuild KitsKit Masters # K5 99339 K5 14-256-1Horton # Ho 799339 Ho Q995669application Kenworth C11, C13oEM # 799339, 989339, 999339, f17-1000-405
reman Fan Clutch rebuild Kits
Kit Masters # K5 99494 K5 14-256
Horton # Ho 799494 Ho Q995582
application Mack ASET AI
oEM # 40MH413AM, 40MH440M, 6514-060-1, 799494, 85123189, 989347, 989473, 989494, 999347, 999473, 999494
reman Fan Clutch rebuild Kits
Kit Masters # K5 99142 K5 14-256-1
Horton # Ho 799142 Ho Q995669
application Freightliner MBE4000
oEM # 799142, 989142, 999142
reman Fan Clutch rebuild Kits
Kit Masters # K5 99336 K5 14-256-1
Horton # Ho 799336 Ho Q995669
application Freightliner MBE4000
oEM # 6514-060-6, 799336, 989336, 999336
reman Fan Clutch rebuild Kits
Kit Masters # K5 99341 K5 14-256-1
Horton # Ho 799341 Ho Q995669
application Peterbilt C13 ACERT
oEM # 799341, 989341, 999341, f17-1000-404
reman Fan Clutch rebuild Kits
Kit Masters # K5 99023 K5 14-256
Horton # Ho 79a9023 Ho Q995568
application International INT 530
oEM # 3545365c91, 799023, 79a9023, 989023, 98A9023, 999023, 99a9023
reman Fan Clutch rebuild Kits
Kit Masters # K5 99067 K5 14-256
Horton # Ho 79a9067 Ho Q995575
application Freightliner Series 60
Fitzgerald Glider Series 60
oEM # 799067, 79a9067, 989067, 98A9067, 999067, 99A9067, F98A9067
reman Fan Clutch rebuild Kits
Kit Masters # K5 99222 K5 14-256
Horton # Ho 79a9222 Ho 995567
application Freightliner Series 60
oEM # 799222, 79a9222, 989222, 999222
reman Fan Clutch rebuild Kits
Kit Masters # K5 99223 K5 14-256
Horton # Ho 79a9223 Ho 995567
application Freightliner Series 60
oEM # 799223, 79a9223, 989223, 98a9223, 999223, 99a9223
To upgrade your on/off fan clutch to a 2-speed fan clutch add -2 to the end of the complete part numberExample: K5 98601 2-speed version is K5 98601-2
If you are rebuilding your fan clutch, us a 2-speed rebuild kit Example: K5 14-256 2-speed version is K5 24-256
PrE-2001 air-EngagEd
K5 9500HP9.5” HT/S Series
K5 7500HP7.5” S Series
Rebuild Kits for Pre-2001 Air Engaged Fan Clutches • U.S. Components and U.S. Manufactured • Two Bearing Hub Design vs. One Bearing Hub Design • SKF Bearings vs. Imported Bearings • Angular Contact Bearing • Floating Return Spring vs. Captive Return Spring • Higher Quality Lining • Superior Fused Plate (Virgin Teflon vs. Lead) • Superior O-Rings (HNBR vs. NBR) • All Wearable Components Are Always Replaced • 200,000 Miles / 24 Months Warranty
K5 9500 Major Kits
K5 4205 - S & HT/S Series
K5 7500 Major Kits
Lining Kits
K5 7503
K5 9503
K5 9505
reman Fan Clutch rebuild KitsKit Masters # K5 99065 K5 14-256Horton # Ho 79a9065 Ho Q995568application Freightliner Series 60
Kenworth Series 60Spartan Series 60Western Star Series 60Fitzgerald Glider Series 60
oEM # 1544-ff1-001, 20822-3540, 799065, 79a9065, 989065, 989227, 98A9065, 999065, 999227, 99A9065, F98A9065
reman Fan Clutch rebuild KitsKit Masters # K5 98621 K5 14-256Horton # Ho 79a8621 Ho 995567application Freightliner DD15, DD16
Freightliner DD13, DD15Western Star DD15, DD16Terex DD13, DD15
oEM # 98621, 79A8621, 988621, 98A8621, 998621, 99A8621, 99A9650, 98A9650, 99A7201, 98A7201
reman Fan Clutch rebuild KitsKit Masters # K5 91007 K5 9500HPHorton # Ho 791007 Ho 994305application Freightliner 3406
Sterling 3406Western Star 3406
oEM # 591007, 791007, 791097, 981006, 981141, 981214, 981219, 981261, 981294, 981343, 987076, 991021, 991148, 991283, 991350, 997096
reman Fan Clutch rebuild KitsKit Masters # K5 91027 K5 9500HPHorton # Ho 791027 Ho 994305application Freightliner 3406
Kenworth 3176, 3406Navistar 3406Peterbilt 3176, 3406Volvo 3176, 3406Western Star 3176, 3406
oEM # 05-11369-035, 05-11369-036, 05-11369-041, 591027, 791027, 791125, 791125RMAN, 819875, 981001, 981053, 981054, 981126, 991012, 991017, 991067, 991068, 991132
reman Fan Clutch rebuild KitsKit Masters # K5 91014 K5 9500HPHorton # Ho 791014 Ho 994305application Kenworth 3406oEM # 591014, 791014, 791014RMAN, 981064, 981110, 981148, 981349,
981362, 981363, 991076, 991119, 991152, 991356, 991372, 991373
reman Fan Clutch rebuild KitsKit Masters # K5 91067 K5 9500HPHorton # Ho 791067 Ho 994305application Kenworth 3176
Peterbilt 3176Volvo 3176
oEM # 05-11369-038, 05-11369-040, 791067, 981051, 981119, 991065, 991126
reman Fan Clutch rebuild KitsKit Masters # K5 91068 K5 9500HPHorton # Ho 791068 Ho 994305application Kenworth C10, C12, 3176oEM # 791068, 791068RMAN, 981184, 981244, 981277, 991184, 991236,
991266
reman Fan Clutch rebuild KitsKit Masters # K5 90007 K5 7500HPHorton # Ho 790007 Ho 994307application Kenworth 3406
Peterbilt 3406Volvo 3406Western Star 3406
oEM # 05-11369-015, 05-11369-016, 590007, 790007, 869865, 869874, 899865, 980081, 990062, 990070, 990143
reman Fan Clutch rebuild KitsKit Masters # K5 91001 K5 9500HPHorton # Ho 791001 Ho 994305application Kenworth L10, M11, NTC
Navistar F290, ISM, L10, M11, NTCVolvo L10, M11Western Star L10, M11, N14, NTC
oEM # 591001, 791001, 791118, 809804, 859803, 981121, 981129, 981262, 981279, 981354, 981355, 981377, 991000, 991013, 991128, 991135, 991251, 991268, 991364, 991365
reman Fan Clutch rebuild KitsKit Masters # K5 91006 K5 9500HPHorton # Ho 791006 Ho 994305application Kenworth N14
Kenworth NTC Big Cam III, 444Kenworth NTC Big Cam IV
oEM # 591006, 791006, 791119, 869822, 981096, 981151, 981357, 981358, 991005, 991105, 991155, 991367, 991368
reman Fan Clutch rebuild KitsKit Masters # K5 91009 K5 9500HPHorton # Ho 791009 Ho 994305application Freightliner N14, NTCoEM # 591009, 791009, 981011, 981073, 981113, 981145, 981243,
981328, 991027, 991084, 991120, 991151, 991235, 991329
reman Fan Clutch rebuild KitsKit Masters # K5 91010 K5 9500HPHorton # Ho 791010 Ho 994305application GMC NTC
Kenworth N14Peterbilt N14, NTC
oEM # 05-11367-033, 05-11369-033, 05-11369-042, 591010, 791010, 791010RMAN, 791121, 981024, 981154, 991040, 991158
reman Fan Clutch rebuild KitsKit Masters # K5 91026 K5 9500HPHorton # Ho 791026 Ho 994305application Kenworth N14
Navistar NT88
oEM # 591026, 791026, 981013, 981077, 981109, 981251, 981253, 991029, 991118, 991243
reman Fan Clutch rebuild KitsKit Masters # K5 91032 K5 9500HPHorton # Ho 791032 Ho 994305application Navistar L10, M11
oEM # 1693465C91, 2005953C91, 2031215C91, 591032, 791032, 981074, 981133, 981164, 981234, 981272, 981385, 991085, 991168
reman Fan Clutch rebuild KitsKit Masters # K5 90000 K5 7500HPHorton # Ho 790000 Ho 994307application Freightliner NTC, 444
Kenworth NTA, NTC, 444
Mack NTCNavistar Super 250, 270, NTA, NTCPeterbilt NTCWestern Star NTC
oEM # 05-11369-009, 590000, 790000, 809811, 819811, 839811, 839813, 849811, 869811, 980003, 980078, 990012, 990013, 990014, 990015, 990018, 990140
reman Fan Clutch rebuild KitsKit Masters # K5 91037 K5 9500HPHorton # Ho 791037 Ho 994305application Kenworth Series 60
Mack Series 60Peterbilt Series 60
oEM # 05-11369-043, 591037, 791037, 791126, 797039, 981062, 981183, 981316, 987029, 991071, 991183, 991304, 997039
www.kit-masters.comcatalog.hortonww.com/catalog/Visit tHE Kit MastErs & Horton WEBsitEs
reman Fan Clutch rebuild KitsKit Masters # K5 91024 K5 9500HPHorton # Ho 791024 Ho 994305application Freightliner Series 60
Kenworth Series 60Sterling Series 60Volvo Series 60
oEM # 591024, 791024, 791065, 981050, 981061, 981104, 981120, 981143, 981146, 981147, 981176, 981224, 981324, 981342, 991064, 991113, 991127, 991149, 991324, 991349
reman Fan Clutch rebuild KitsKit Masters # K5 91011 K5 9500HPHorton # Ho 791011 Ho 994305application Freightliner Series 50, 60
Kenworth Series 60Peterbilt Series 60Sterling Series 60Volvo Series 60Western Star Series 50, 60
oEM # 591011, 791011, 980020, 981037, 981070, 981101, 981127, 981209, 981230, 981298, 991051, 991110, 991133, 991212, 991223, 0511369032, 05-11369-032, 0511369044, 05-11369-044, 791091, 981368, 987073, 991378, 997083, 91091, 990086
reman Fan Clutch rebuild KitsKit Masters # K5 90009 K5 7500HPHorton # Ho 790009 Ho 994307application Freightliner All V Engines
Kenworth Series 50, 60Peterbilt Series 60Volvo Series 60
oEM # 590009, 790009, 819849, 980010, 980015, 980087, 990041, 990077, 990149, 0511369026, 05-11369-026
Kysor styLE rEPLaCEMEnts
The High-Torque 8801X / 8801NLong-lasting friction plus our two o-ring shaft combine for ultimate performance
Kit Masters’ 8801X extended shaft allows for theaddition of a urethane o-ring for resilience to motion,
and a Viton® o-ring to create a superior air barrier.
• Torque Rated for 30” Fans and Larger • Redesigned Shaft for Dual Seal Protection • Superior O-Ring Materials • Higher Quality Lining • Truer Air Shaft • 200,000 Mile – 24 Month Warranty
We stockrEar-air HUBs
Call for availability
K5 8801n
OEM# 1090-08500-01, 1090-09500-01, 1090-09500-01B, 1090-09600-01, 1090-09600-01B, 1090-09650-01, 10900965001, 1090-09650-01B, 1090-09750-01, 1090-09750-01B, 1090-09900-01, 1090-09900-01B, 1090-09950-01, 1090-09950-01B, 2501022c91, 2509380c91, 2514343C91, 2602141c91, 3415013, 3915592, 65140701, 6514-070-1, 85108716, 85111808, 85114233, 85134489, 8805X, 9908500, 9908501, f8hz-8a627-ua
Fan Pilot FlexibilityThe 8801N’s innovative design allows you to easily transform the standard 2.56” pilot into a 5” pilot. No need to replace your fan or buy a different fan clutch. Reduce your inventory & have complete coverage of rear-air fan clutches.
K5 8001X Rebuild with kit # K5 8000SKL
Front Air
OEM# 1090-07050-01, 1090-08000-01, 1090-09000-01
Reman
K5 8005X Rebuild with kit # K5 8000SKL
Front Air
OEM# 1090-07050-03, 1090-08000-05,1090-09000-05
RemanK5 8801X Rebuild with kit
# K5 8000SKLRear Air
Most common 2003-Present
OEM# 1090-08500-01, 1090-09500-01, 1090-09600-01, 1090-09650-01, 9908500, 9908501
Reman
K5 8802X Rebuild with kit # K5 8000SKL
Rear Air
No Studs with threaded 5/16 holes
OEM# 1090-08500-02
RemanK5 8803X Rebuild with kit
# K5 8000SKLRear Air
OEM# 1090-08500-03, 1090-09500-03
Reman
New
Ht650® / BEndiX®-styLE Fan CLUtCHEs
Front/rEar air rEBUiLd Kitsseal & Lining Kits Hub Bearing Kits
seal Kits
Lining Kits
K5 8000sKL - Front Air For K-22 Front Air Fan Clutches
OEM# 1033-05435-02
K5 8500sKL - Rear Air For K-22 Rear Air Fan Clutches
OEM# 1033-05435-03
K5 8800sKL - Rear Air For K-26, K-30 & K-32 Fan Clutches
OEM# 1033-09339-01
K5 8800sKBL - Rear Air For Aluminum Body K-30 & K-32
K5 8000sK - Front Air For K-22 Front Air Fan ClutchesK5 8800sK - Rear Air For K22, K-26, K-30 & K-32Rear Air Fan Clutches
OEM# 1033-08233-01
K5 8500L For K-22 Fan Clutches OEM# 1033-08233-01K5 8800L For K-26 & K-30 Rear Air Fan Clutches
OEM# 1033-09340-01
K5 8000SK K5 8800SK
When replacing your fan clutch, you should alsoconsider replacing the pulley bearings.
These five bearing kits will repair all rear-air hubs.Replacing the hub bearings will ensure longer fan clutch life.
K5 8581-01oEM # 1033-07781-01Most popular bearingkit for rear-air hubs
K5 8582-01oEM # 1033-07782-01
K5 8582-03oEM # 1033-07782-03
K5 8582-02oEM # 1033-07782-02
K5 8582-04oEM # 1033-07782-04
HT550® / HT650® CONVERSIONS 8009X is a direct replacement/upgrade for Mack® applications of the HT650®/HT550® fan clutches*
*When converting from HT650®/550®, reverse solenoid valve to air-to-disengage instead of air-to-engage.
oEM reman Kit Masters #
981418 K5 8011X981419 K5 8011X981420 K5 8011X981442 K5 8009X981446 K5 8009X991400 K5 8011X991402 K5 8011X991405 K5 8011X991419 K5 8011X
oEM reman Kit Masters #
991420 K5 8011X991428 K5 8009X991435 K5 8009X991439 K5 8009X991445 K5 8010X991446 K5 8011X991450 K5 8010X991451 K5 8009X
THEIRS Kit Masters
Some customers have reported higher thanacceptable failure rates with this type of fan clutch.
oEM # KM Part #010021855 K5 24-462CK010021879 K5 24-462CK010021881 K5 24-463CK010021883 K5 24-464CK010021885 K5 24-465CK010021887 K5 24-469CK010021889 K5 24-466CK010021891 K5 24-467CK010022595 K5 24-468CK010024102 K5 24-462CK010024103 K5 24-463CK010024104 K5 24-464CK010024105 K5 24-462CK010024106 K5 24-465CK010024107 K5 24-466CK010024108 K5 24-467CK010024109 K5 24-468CK010024110 K5 24-469CK
oEM # KM Part #010024673 K5 24-462CK010024674 K5 24-463CK010024675 K5 24-464CK010024676 K5 24-465CK010024677 K5 24-466CK010024678 K5 24-467CK010024679 K5 24-468CK010024680 K5 24-469CK010024681 K5 24-462CK010026462 K5 24-462CK010026463 K5 24-463CK010026464 K5 24-464CK010026465 K5 24-465CK010026466 K5 24-466CK010026467 K5 24-467CK010026468 K5 24-468CK010026469 K5 24-469CK010026470 K5 24-462CK
oEM # KM Part #21210839 K5 24-462CK21210841 K5 24-463CK21210843 K5 24-464CK21210845 K5 24-465CK21210847 K5 24-466CK21210849 K5 24-467CK21210851 K5 24-468CK21210853 K5 24-469CK21210855 K5 24-462CK21508295 K5 24-462CK21508297 K5 24-463CK21508299 K5 24-464CK21508301 K5 24-465CK21508303 K5 24-466CK21508305 K5 24-467CK21508307 K5 24-468CK21508309 K5 24-469CK21508311 K5 24-462CK
oEM # KM Part #21925081 K5 24-462CK21925083 K5 24-463CK21925085 K5 24-464CK21925087 K5 24-465CK21925089 K5 24-466CK21925091 K5 24-467CK21925093 K5 24-468CK21925095 K5 24-469CK21925097 K5 24-462CK22208767 K5 24-462CK22208772 K5 24-463CK22208777 K5 24-464CK22208779 K5 24-465CK22208781 K5 24-466CK22208783 K5 24-467CK22208785 K5 24-468CK22208787 K5 24-469CK22208790 K5 24-462CK
tHE soLUtion:Easily convert the vehicle’s fan clutch to
a proven technology from an industry leader in innovations and solutions.
The conversion kit includes:New fan clutch assembly ∙ Solenoid valve ∙ Air line and conversion hardware ∙ Conversion instructions
our 2-speed goldtop packs over
5,000 in/lbs of torque!all conversion kit part #s
in stoCK noW
Use the nEW Kit Masters
2-speed goldtopto convert your Cool Logic HdMs fan clutch
Some customers have reported higher thanacceptable failure rates with this type of fan clutch.
www.kit-masters.comcatalog.hortonww.com/catalog/Visit tHE Kit MastErs & Horton WEBsitEs
Complete Part# Head BracketPilot
adapterspecial oEM
Fan sizes
rotationMount type
drive Pilot Length
K5 rV0120301-03 K5 RV-H01 K5 RV-203 K5 RV-P01 K5 RV-S03010023312, 2599306C1
20-24 CW Bolt-On 2 1.3
K5 rV0210900-00 K5 RV-H02 K5 RV-109 - - 010020755, 010020893, 010020914
22-24 CW Spin-On 1.25-16UN-2B LH 2.8
K5 rV0220300-00 K5 RV-H02 K5 RV-203 - - 1119912, 1119916, 16686-1
22-24 CW Bolt-On 2.56 1.4
K5 rV0220301-00 K5 RV-H02 K5 RV-203 K5 RV-P01 - 0504909C1, 0504910C1, 0537481C1
22-24 CW Bolt-On 2 1.4
K5 rV0311100-00 K5 RV-H03 K5 RV-111 - - 010020509, 010020552, 010020791
22-24 CCW Spin-On 1.25-18UNEF-2B RH 2.5
K5 rV0410200-00 K5 RV-H04 K5 RV-102 - - 010021314,
167118, 1689479C1
25-26 CW Spin-On .75-16UNF-2B LH 2.3
K5 rV0410500-00 K5 RV-H04 K5 RV-105 - - 010020805, 010021532,
1210-09157-0125-26 CW Spin-On 1.25-16UN-2B LH 2.8
K5 rV0420100-00 K5 RV-H04 K5 RV-201 - - 168821, 17456-1, 17708-1
25-26 CW Bolt-On 2.56 2
K5 rV0610400-03 K5 RV-H06 K5 RV-104 - K5 RV-S03010019556, 010021526, 3584438C1
27-28 CW Spin-On 1.25-16UN-2B LH 2
K5 rV0610500-00 K5 RV-H06 K5 RV-105 - - 010021530,
1210-09168-03, 166223
27-28 CW Spin-On 1.25-16UN-2B LH 2.8
K5 rV0620101-01 K5 RV-H06 K5 RV-201 K5 RV-P01 K5 RV-S011657425C91, 1666056C91, 1666056C92
27-28 CW Bolt-On 2 2.1
K5 rV0720101-01 K5 RV-H07 K5 RV-201 K5 RV-P01 K5 RV-S01010021524, 010021525, 1657078C91
29-32 CW Bolt-On 2 2.1
www.kit-masters.comVisit Kit MastErs WEBsitE
nearly Every Medium/Heavy duty Viscous Fan drive
in stoCK noW!51 intErCHangEaBLE BraCKEts
PLUs 7 HEads
EQUaLs tHoUsands oF Parts!
By creating several universal viscous heads, along with interchangeable brackets and adapters, Kit Masters has narrowed the field of viscous fan drives from over 1,000
part numbers, down to just a few components. This unprecedented system makes it possible to have access
to a replacement for nearly every viscous fan drive.
Kit Masters P/n Horton P/n description oEM#
K5 3282 Ho 993249, Ho 993272, Ho 993284, Ho 993286, Ho 993296, Ho 993314
3-way Solenoid Valve NO-NC 125NPTF, 12VDC
993282
- Ho 993293 N.O. and N.C., 12VDC 983246
- Ho 993330 N.C., 12VDC 983283
Kit Masters P/n Horton P/n description oEM#
K5 3605 Ho 993605 195°Normally Closed Thermal Switch (1/2” Thread) used on most Cummins® 993605
K5 3606 Ho 993606 200°Normally Closed Thermal Switch (1/2” Thread) used on most Detroit Diesel® 993606
K5 3607 Ho 993607 205°Normally Closed Thermal Switch (1/2” Thread) used on most Caterpillar® 993607
K5 3653 Ho 993653 195°Normally Open Thermal Switch (1/2” Thread) used on most Cummins® 993653
K5 3654 Ho 993654 200°Normally Open Thermal Switch (1/2” Thread) used on most Detroit Diesel® 993654
K5 3655 Ho 993655 205°Normally Open Thermal Switch (1/2” Thread) used on most Caterpillar® 993655
soLEnoid VaLVEs
tHErMaL sWitCHEs
Horton Pneumatic Fan drive Diagnostic and Maintenance KitP/n Ho 995645 Extend the life of your Horton fan drive. Inspection of pneumatic fan drives at routine vehicle maintenance intervals is now easier than ever. A simple 15 minute check may help prevent premature failures that can lead to days of downtime. The kit includes all of the required tools and documentation you need to diagnose and maintain your Horton DM Advantage® fan drive, packaged in a convenient, rugged carrying case.
tooLs
sWitCHEs / VaLVEs
Pulley Bearing Press Fixture P/n K5 14-PF Kit Masters now offers a press fixture specifically designed to remove and install the pulley bearings while rebuilding Horton style fan clutches with the Gold Top, Gold Top 2 Speed and HP kits.
This press fixture is designed to install bearings properly by applying even pressure without pre-loading the bearings causing premature bearing failure, or cause damage to the bearing seals.
MIDWESTWHEEL.COM
IOW
A
MIS
SO
UR
I
DES MOINES1436 E. Ovid Ave.
office 515.265.1491fax 515.265.4120
parts fax 800.314.4329parts 800.888.0248
CEDAR RAPIDS200 50th Ave. S.W.main 319.365.4453fax 319.365.6327
parts fax 877.706.6085parts 800.332.5435
DAVENPORT8502 Northwest Blvd.
main 563.322.2671fax 563.322.5940
parts 800.553.1886
SIOUX CITY1819 E. 4th St.
main 712.252.7969fax 712.252.6149
parts 800.943.3534
CLEAR LAKE840 Hwy. 18 W.
main 641.357.7101fax 641.357.8190
parts fax 800.548.9674parts 800.397.5630
KANSAS CITY5801 E. Front St.
main 816.471.1552fax 816.471.0813
parts 800.821.7402TRUCK PARTS
SUPER STORETM
August 2018 (18Kit Masters and Horton Fan Clutches)
Use http://kit-masters.com/fan.php to identify your current fan blade!
P/n diameter Pilot Bolt Circle oEM #
K5 4735-41392-02 30 2 3.50/3.875
05-17927-200, 05-19313-200, 20801-3452, 20801-3478, 392200-30, 3937593, 3972009, 4035-41392-02, 8182375, 981762202, 985762202, 991762202, 995762202
K5 4735-42623-11 31 2 3.5 2961-31B, 445200-31
K5 4735-41392-01 30 2.56 3.5
1973-30J, 2022048C91, 20801-3451, 20801-3477, 3415038, 392256-30, 3974048, 4035-41392-01, 8178064, 94HA-8600-AA, 981762252, 985762252, 991762252, 995762252
K5 4735-41393-08 32 2.56 3.5
05-18918-256, 05-19639-256, 20801-3461, 20801-3483, 2MH52P3, 3415031, 3507212C1, 3571552C1, 393256-32, 4035-41393-08, 981813253, 991813253
K5 4735-44610-01 32 2.56 3.5 3809753C2K5 4735-44560-01 32 2.56 3.5 3625639C1
K5 4735-41392-08 32 2.56 3.5
05-19754-256, 20801-3454, 20801-3491, 3415030, 3520182C1, 392256-32, 4035-41392-08, 981813252, 991813252
K5 4735-43783-05 28 5 6 1974-28D, 3541257C1
K5 4735-41393-16 30 5 6
05-17926-500, 05-19615-500, 2000729C2, 393500-30, 4035-41393-16, 981762503, 985762503, 991762503, 995762503
K5 4735-41393-09 32 5 6
05-19639-500, 393500-32, 4035-41393-09, 981813503, 981813503-001, 991813503, 991813503-001
Fan Blades
Extended Life Coolant & SCA Pre-Charged Coolant Full Strength & Prediluted 50/50
We CaRRy a Full line OF PReStOne COMMand® heaVy duty COOlantS
Recommended