View
152
Download
1
Category
Preview:
Citation preview
residentialdivision
completeautomation kits
commercialdivision
CAME United Kingdommoving with technology
car-parks and access
controldivision
Pric
elis
t2005
UMC GROUP UMC GROUP
contentsNew CAME products for 2005
Complete automation kits
Residential division
Commercial division
Car parks & access control division
page 7
page 15
page 31
page 81
page 155
G8000 automatic road barriers up to 8.0 metres page 8CBX automation for industrial doors page 11TAM multi-user radio transmitter page 12RBE 4 MT radio receiver for up to 999 users page 12U4410GB complete system for garage doors page 13
FROG 230V Kits page 16FROG 24V DC Kits page 17FERNI 230V Kits page 18FERNI 24V DC Kits page 19ATI 5m 230V Kits page 20ATI 5m 24V DC Kits page 21ATI 3m 230V Kits page 22ATI 3m 24V DC Kits page 23
KRONO 230V Kits page 24FAST 230V Kits page 25BX / BK800 230V Kits page 26BK1200/1800/2200 230V Kits page 27FLEX 24V DC Kits page 28VER 24V DC Kits page 29TRA Radio Receiver Kits page 30
Automation for sliding gates BZ, BX, BXE, BK800 page 34Automation for swing gates FLEX, ATI, KRONO, FROG, FAST, FERNI page 42Automation for garage doors VER page 66Control accessories SET, DIGITAL page 70Radio control accessories TOP, ATOMO, TFM, TAM page 72Safety accessories KIARO, DIR, DOC, D SERIES page 76
Automation for sliding gates BK, BKE, BY3500T page 82Automation for swing gates ATI, KRONO, FROG, FERNI page 88Automatic barriers G2500, G4000, G6000, G8000, G12000 page 106
Automatic rising bollards page 117Automation for industrial doors and rolling shutters H, F4000, C SERIES page 130Control accessories SET, DIGITAL page 142Radio control accessories TOP, ATOMO, TFM, TAM page 144Safety accessories KIARO, DIR, DOC, D SERIES page 148Automatic doors FLY page 151
PS4000 automatic parking system page 156RBM21 access control system page 160RBM84 access control system page 164
0115 9210430 0115 92104310115 9210430 0115 9210431
A safe product becauseit has undergone the most
comprehensive tests
The experienceof an international
company
TEST & OPERATIONS.All the prototypes and CAME products are tested toensure that on-site operation matches that intendedby the design team.
TEST N1
METHOD & SYSTEM.CAME conducts pre-production testing on all products before they are marketed.TEST N2
FINISHED PRODUCT & ACCESSORIES.Analysis of every items general quality and subsequentsample check of every batch.TEST N3
CERTIFICATIONS & ENVIRONMENTS.CAME is ISO 9001:2000 certified and ISO14001 but thats notenough: CAMEs tests go far beyond and expose the products toextremely arduous conditions: from -30C to +80C.
TEST N4
TECHNICAL UPDATING TRAINING.CAME BLUPARTNER identifies the installation technicianswho are constantly updated in theoretical, technical andpractical matters through an internal training programme.
TEST N5
COMPONENTS & PRODUCTION.All individual components are checked on arrival at CAMEspremises, and approved according to parameters laid downin the pre-production test phase.
TEST N6
ELECTROMAGNETIC INTERFERENCES.CAMEs control units are approved with specific tests:a: functional logic;b: ElectroMagnetic Compatibility;c: climatic tests.
TEST N7
CAME guarantees distribution in Italy and around the world
through its branches in Italy, France, Germany, Spain, UK,
Belgium, Poland and United States, and its complete
distribution and technical/commercial assistance network at
the service of local operators.
Presence and assistance fora widespread distribution
A safe product becauseit has undergone the most
comprehensive tests
The experienceof an international
company
The experienceof an international
company
A safe product becauseit has undergone the most
comprehensive tests
Units 1 & 3 Orchard Park Industrial Estate, Town Street, Sandiacre, Nottingham NG10 5BP
1972 - 2005
For over 33 years CAME has been fully committed to an
ambitious project embracing all aspects of security.
We have conducted stringent product tests, careful checks
on the production processes, and ongoing personnel
training programmes for all work phases.
Every phase - from design to assembly - is followed by
highly specialised teams and state-of-the-art sector
equipment.
All production activities are carried out in our production
units. This ensures that our internal managers can
constantly control all the various procedures.
CAME United KingdomCAME & URBACO training centre
UK head office & showroom
CAME United KingdomCAME & URBACO training centre
UK head office & showroom
CAME United KingdomCAME & URBACO training centre
UK head office & showroom
0115 9210430 0115 9210431Tel: Fax: CAME on orders to
products products The CAME range includes
automation for:
sliding gates
swing gates
garage and sectional doors
shutters andindustrial gates
car parksand street barriers
pedestrian doors
access control
accessories forcontrol and safety
parking systems
automatic rising bollards
All brochures can bedownloaded in PDF format at
www.cameuk.com
Established in 1972 in Dosson di Casier - Treviso, a small townclose to Venice, CAME has always distinguished itself with itschoice of highly reliable electromechanical automation systemsthat do not require any periodic maintenance.Today CAME boasts a 17,500 square-meter building includingaccounts department and warehouse, a 6,000 square-metre /3 floors modern management headquarters with auditorium,show room, professional training centre and commercialdepartment, as well as 10 plants that are engaged in productionand quality control.
During over 30 years of intense growth, CAME has become theleading Italian and European manufacturer of automatic electro-mechanical operators for doors and gates, investing greatly inresearch and development of technology and holding dozens ofpatents. All CAME automation, safety, control accessories andaccess management systems are produced under exclusiveCAME patents that are the result of lengthy research, innovativetalent and design procedures, and have undergone exhaustivefinal testing within the company and by outside testing agencies.CAME products are guaranteed to meet the current Europeansafety standards and the company has been certified ISO9001:2000 and ISO 14001.The complete range has the flexibility to meet any kind ofinstallation requirement. Low-voltage models, microprocessor-equipped control panels, modern design and excellentquality/price ratio are just some of the strengths of the CAMEproduction and distribution strategy.
CAMEs warehouse moves more than 500,000 automatedsystems each year, thus assuring prompt service to a well-established distribution and service network of experienceddealers and sister companies all over the world.
CAME firmly believes in the quality of its informative andprofessional training. This is where CAME is channellingconsiderable energy. A recent huge investment has been madeto establish a new directional centre whose main aim is to be astart-up and reference point for all CAME partners. This will leadto further improvements and innovations in our promotionalmaterial and training courses, presenting a coherent CAMEimage and philosophy, through special courses held at theDosson headquarters.
The will to strengthen the relationship within all CAMEassociates, to grow up together in this increasing and maturingbusiness, with the same identity in any part of the world!
CAME UNITED KINGDOM, A TRADING DIVISION OF UMC GROUP LTD (the Seller)
TERMS AND CONDITIONS OF SALE1. INTERPRETATION
Buyer means the person firm or company who buys or agrees to buy the Goods from the Seller;
Buyers Premises means the Buyers premises detailed on the quotation given by the Seller to the Buyer in respect
of the Goods;
Delivery Date means the date specified by the Seller when the Goods are to be delivered;
Conditions means these terms and conditions of sale;
Contract means the contract for the sale by the Seller and purchase by the Buyer of Goods;
Goods means all goods supplied by the Seller to the Buyer pursuant to the Contract;
Price means the price of the Goods plus VAT plus Additional Charges as referred to in Conditions 6.3
and 4.8;
Seller means CAME United Kingdom, a trading division of UMC GROUP LTD. whose registered office
is at Unit 3, Orchard Park Industrial Estate, Town Street, Sandiacre, Nottingham, NG10 5BP;
Surcharge means the sum of 10.00 (ten pounds);
Wasted Time Rate means the charge for wasted time at the Sellers standard rate for wasted time of 1 (one pound)
per minute up to and including 30 (thirty) minutes and thereafter at a charge of 2 (two pounds)
per minute, or such other charge as notified to the Buyer from time to time;
writing includes facsimile transmission but excludes writing on the screen of a visual display unit or
other similar device.
2. BASIS OF SALE
2.1 These Conditions shall apply to the sale by the Seller of all Goods purchased by the Buyer and these Conditions shall
govern the contract to the exclusion of any other terms and conditions introduced or submitted by the Buyer.
2.2 No variation of these Conditions may be given by any of the Sellers employees unless confirmed in writing by an
authorised director of the Seller and no collateral or supplemental contract may be made or construed unless confirmed
in writing by an authorised director of the Seller on the Sellers official stationery.
Any tenders or quotations submitted to the Buyer shall remain valid for the period stated therein, but if no period is
specified such tenders and quotations shall be valid for [30] days from the date thereof. All tenders and quotations
shall be subject to these Conditions.
Any tenders or quotations will not constitute an offer and the Contract shall be made when the Seller acknowledges
the order placed by the Buyer in writing and not before.
Where the Seller acknowledges or confirms the details of the Contract in writing, the Buyer shall be under a duty to
bring any discrepancies to the Sellers notice immediately, and if the Buyer fails to do so, the Buyer shall, if the Seller
so elects, be bound by the details contained mentioned or referred to in the written confirmation of the Contract.
Any typographical, clerical or other error or omission in any sales literature, quotation, price list, acceptance of offer,
invoice or other documentation or information issued by the Seller shall be subject to correction without any liability
on the part of the Seller.
The Sellers employees or agents are not authorised to make any representations concerning the Goods unless
confirmed by an authorised director of the Seller in writing. In entering into the Contract the Buyer acknowledges
that it does not rely on any such representations which are not so confirmed, save that nothing in these Conditions
shall exclude the Sellers liability for fraudulent misrepresentation.
No order which has been accepted by the Seller may be cancelled by the Buyer except with the agreement in writing
of the Seller and on terms that the Buyer shall indemnify the Seller in full against all loss (including loss of profit),
costs (including the cost of all labour and materials used), damages, charges and expenses incurred by the Seller as a
result of cancellation.
2.9 The Seller reserves the right to make any changes to the Goods:-
2.9.1 which are required so that the Goods conform with any applicable statutory or EU requirement; or
2.9.2 where such changes to the Goods do not materially affect the quality or performance of the Goods.
3. SAFETY
Any Goods supplied by the Seller must be handled correctly. The Buyer must ensure that all appropriate safety precautions
are taken and that its staff are aware of and comply with all storage and usage instructions.
4. DELIVERY
4.1 Unless otherwise agreed by the Seller in writing, delivery shall take place at the Buyers Premises. The Seller shall
reasonably endeavour to deliver the Goods to the Buyers Premises or such other address as may be agreed between
the parties in writing on the date indicated by the Seller or the date agreed between the parties, but the time of delivery
or performance shall not be of the essence and if despite those endeavours, the Seller is unable for any reason to fulfil
any delivery of the Goods on the date so indicated, the Seller shall not be deemed to be in breach of contract or have
any liability to the Buyer.
The Seller shall notify the Buyer when the Goods are ready for delivery. In the event that the Buyer shall not be able
to take delivery of the Goods within [10] working days from the date of receipt of such notification, the Seller shall
be entitled, but not obliged, to arrange storage of the Goods until actual delivery and charge the Buyer for the
reasonable costs (including insurance) of storage.
The Buyer shall provide the Seller with clear delivery instructions in the event that the Seller agrees to deliver the
Goods to any point other than the Sellers premises.
Upon delivery the Buyer will sign a delivery note which will be conclusive evidence that delivery of the Goods has
been made.
4.5 The Seller shall have the right to deliver any Goods ordered in instalments.
4.6 Failure by the Seller to deliver any one or more of the instalments in accordance with these Conditions or any claim
by the Buyer in respect of the Goods delivered in any one or more instalments shall not entitle the Buyer either to treat
the Contract as a whole as repudiated or to reject or refuse to take delivery of any of the Goods delivered in any other
instalment.
4.7 If the Seller fails to deliver the Goods (or any instalment thereof) for any reason other than any cause beyond the
Sellers reasonable control or the Buyers fault, and the Seller is accordingly liable to the Buyer, the Sellers liability
shall be limited to the excess (if any) of the cost to the Buyer (in the cheapest available market) of similar goods to
replace those not delivered over the Price of the Goods.
4.8 The Buyer shall be ready to accept delivery on the agreed Delivery Date and unless the Seller agrees otherwise, the
Seller shall unload the Goods. The Buyer shall ensure that at least one representative is available to assist the Seller
during the unloading of the Goods and the Buyer shall be charged the Wasted Time Rate and any other expenses
incurred by the Seller (Additional Charges) for:-
4.8.1 wasted time for any delay;
4.8.2 each repeat delivery where the Seller or Sellers carrier leaves the delivery point and subsequently returns to
the delivery point with the Goods as a result of the Buyers inability or unwillingness to accept delivery and/or
delay in unloading the Goods and/or the Buyers failure to provide a representative to assist the Seller in the
unloading of the Goods.
The Buyer shall notify any loss of or damage to the Goods in writing to the Seller and to the carriers (if
applicable) within 3 days of the Delivery Date in respect of any damage of the Goods and within 10 days of
the Delivery Date in respect of any loss of the Goods, which will enable the Seller to comply with the carriers
conditions affecting such loss or damage. Where Goods are delivered by carrier, unless the Goods are checked
on receipt, the carriers documentation shall be endorsed unexamined.
4.10 If the Buyer fails to take delivery of the Goods (otherwise than by reason of the Sellers fault) or fails to give
the Seller adequate instructions for delivery then, without prejudice to any other right or remedy available to
the Seller, the Seller may:-
4.10.1 store the Goods until actual delivery and charge the Buyer for the reasonable costs (including insurance) of
storage and the Goods shall remain in all aspects at the Buyers risk; or
4.10.2 sell the Goods at the best price readily obtainable and (after deducting all reasonable storage and selling
expenses) charge the Buyer for any shortfall below the Price under the contract;
be entitled to full payment in respect of the Goods refused;
without prejudice to any right on the Sellers part to damages or payment in respect thereof, the Seller shall be
entitled to cancel any further consignments under the contract.
5. RISK
Risk of damage to or loss of the Goods shall pass to the Buyer at the time of delivery, or if the Buyer wrongfully fails to take
delivery, the time when the Seller has tendered delivery of the Goods.
6. PRICE
6.1 The Price for the Goods shall be the price specified by the Seller in the quotation and unless otherwise stated prices
are quoted:-
6.1.1 exclusive of Value Added Tax (which the Buyer shall be additionally liable to pay to the Seller); and
6.1.2 on an Ex-Works basis.
6.2 Where the Seller is required to deliver the Goods on any basis other than ExWorks, unless any specific fee or charge
is agreed by the Buyer with the Seller, the Seller reserves the right to charge a reasonable fee to the Buyer for the cost
of any carriage and/or other expenses incurred by the Seller in relation to the delivery of the Goods (Additional
Charges).
6.3 The Buyer shall bear all additional costs incurred by the Seller on account of any materials or designs supplied by the
Buyer requiring any additional process not taken into account in determining the Price.
7. PAYMENT TERMS
7.1 The payment terms in this Condition apply save to the extent that they are inconsistent with any specific payment
terms agreed in writing between the Seller and the Buyer.
7.2 The Buyer shall pay the Price of the Goods and any Additional Charges in accordance with the payment terms set out
on the quotation.
7.3 The Seller shall be entitled to invoice the Buyer for the Price of the Goods on or at any time before despatch of the
Goods or any instalment thereof.
7.4 The Buyer shall make payment for the Price of the Goods in sterling, unless agreed otherwise in writing. Any payment
received by the Seller in any other currency will not be deemed to be payment for the Goods in question.
7.5 Where the Buyer makes payment for the Goods by cheque the Seller reserves the right to charge a Surcharge in the
event that any cheque rendered in payment of the Sellers invoice is initially refused.
7.6 Unless the Seller agrees that Condition 7.7 shall apply the Buyer shall pay each invoice from the Seller on demand.
7.7 Where the Seller agrees that this Condition 7.7 shall apply the Buyer shall pay each invoice from the Seller within 30
days of the date the Sellers invoice is issued.
7.8 In the event that the Buyer fails to pay any invoice from the Seller by the due date, all invoices issued to the Buyer
by the Seller in respect of any goods sold or supplied pursuant to any other contract shall immediately fall due for
payment and any credit offered or extended by the Seller to the Buyer in respect of the same shall be cancelled
forthwith.
7.9 The Sellers invoices shall be payable in accordance with these Conditions, notwithstanding that delivery may not
have taken place and the property in the Goods may not have passed to the Buyer. The time of payment of the Sellers
invoices shall be of the essence of the Contract.
7.10 If the Buyer fails to make payment on the due date then, without prejudice to any other right or remedy available to
the Seller: -
7.10.1 the Seller shall be entitled to charge the Buyer interest (both before and after any judgement) on the amount
unpaid, at the rate of 3% per annum above the Sellers bankers base rate current from time to time; and
7.10.2 the Seller shall be entitled to withhold delivery of any Goods agreed to be sold by the Seller to the Buyer or any
instalment thereof (being the subject of the contract or any other contract) until the overdue payment is made in full.
8. TITLE
8.1 Notwithstanding delivery and the passing of risk in the Goods, or any other provision of these Conditions, title in the
Goods shall not pass to the Buyer until the Seller has received in cash or cleared funds payment in full of the Price of
the Goods and all other goods agreed to be sold by the Seller to the Buyer for which payment is then due.
8.2 Until such time as title in the Goods passes to the Buyer, the Buyer shall hold the Goods as the Sellers fiduciary agent
and bailee, and shall keep the Goods separate from those of the Buyer and third parties and properly stored, protected
and insured and identified as the Sellers property, but shall be entitled to resell or use the Goods in the ordinary course
of its business.
8.3 Until such time as the title in the Goods passes to the Buyer, the Seller shall be entitled at any time to require the Buyer
to deliver up the Goods to the Seller and if the Buyer fails to do so forthwith, to enter upon any premises of the Buyer
or said party where the Goods are stored and mark identify and repossess the Goods.
8.4 The Buyer shall not be entitled to pledge or in any way charge by way of security for any indebtedness any of the
Goods which remain the property of the Seller, but if the Buyer does so all monies owing by the Buyer to the Seller
shall (without prejudice to any other right or remedy of the Seller) forthwith become due and payable.
9. WARRANTIES AND LIABILITY
9.1 Subject to the Conditions set out below and clause 10.2 subject to the proviso that the Seller shall be under no liability
arising from failure to follow the Sellers or the manufacturers instructions (whether oral or in writing), inappropriate
storage, improper use, inadequate maintenance or misuse of the Goods, the Seller warrants that:-
9.1.1 the Goods will correspond with the Sellers specification for them on delivery;
9.1.2 save as provided in and subject to the provisions in sub-clause 9.1.3 below (unless otherwise agreed between
the parties) the Goods will be free from material defects for 3 years from the Delivery Date; and
9.1.3 this warranty does not cover wear items that are listed in the Operations Guide relating to the Goods.
9.2 The Buyer shall be under a duty to inspect the Goods in accordance with the provision of clause 4.9. In the event of
any patent defect the Buyer shall inform the Seller of such defect immediately on discovery but in any event within
[14 days] of delivery. In the event of a latent defect being discovered, the Buyer shall inform the Seller of such defect
immediately on discovery of the same. Any claim for breach of warranty by the Buyer shall not be accepted by the
Seller unless the Buyer notifies the Seller in writing of the nature of the claim within the time limit specified within
this Condition.
9.3 The Seller shall not be liable for any defect in the specification or performance of the Goods if such defect is due to
inaccurate or insufficient information instructions or drawings being supplied to the Seller by the Buyer (or
agent/employee/representative thereof) at the request of the Seller or otherwise.
9.4 Any warranty given in these Conditions shall not apply to any modification and/or repair carried out to the Goods
without the Sellers prior approval in writing.
9.5 Subject as expressly provided in these Conditions, all warranties conditions or other terms implied by statute or
common law are excluded to the fullest extent permitted by law.
9.6 The Buyer shall not be entitled to reject the Goods where the alleged defect or breach of contract is so slight that it
would be unreasonable for the Buyer to reject the Goods.
9.7 Where any valid claim in respect of the Goods is made by the Buyer the Seller shall be entitled to replace or repair
the Goods (or the part in question), at the Sellers sole discretion, refund to the Buyer the price of the relevant Goods
(or a proportionate part of the price for the relevant Goods), and the Seller shall have no further liability to the Buyer.
The Buyer acknowledges that any such valid claim is to be assessed and resolved in accordance with this Condition
by the Seller working in conjunction with Came Cancelli Automatici Spa (the manufacturer).
9.8 The Sellers liability in connection with the sale of the Goods and the provision of the Services to the Buyer shall be
as follows:-
9.8.1 in respect of death or personal injury, the Sellers liability shall be unlimited;
9.8.2 in respect of physical damage to or loss of the Buyers tangible property to the extent that it results from the
wilful default or negligence of the Seller, its employees, agents or contractors the Sellers liability shall be
limited to an amount of 5 million in respect of each incident or series of connected incidents;
9.8.3 in respect of all other direct loss (whether in contract, tort, or otherwise) the Sellers liability shall not exceed
5 million; and
9.8.4 in respect of any loss goodwill or for any type of consequential, special or indirect loss or damage the Sellers
liability shall be nil.
9.9 The Seller shall not be liable to the Buyer nor be deemed to be in breach of contract by reason of any delay in
performing, or any failure to perform, any of the Sellers obligations in relation to the contract if the delay or failure
was due to any cause beyond the Sellers reasonable control. The following shall (without limitation), be regarded as
cause beyond the Sellers reasonable control:-
9.9.1 act of God, explosion, flood, tempest, fire or accident;
9.9.2 war or threat of war, sabotage, insurrection, terrorism, civil disturbance or requisition;
9.9.3 acts, restrictions, regulations, bye-laws, prohibitions or measures of any kind on the part of any governmental,
parliamentary or local authority;
9.9.4 import or export regulations or embargoes;
9.9.5 strikes, lock-outs or other industrial actions or trade disputes (whether involving employees of the Seller or of
a third party);
9.9.6 difficulties in obtaining raw materials, labour, fuel, parts or machinery;
9.9.7 power failure or breakdown in machinery.
10. SPECIFICATIONS AND INSTRUCTIONS
10.1 Unless the Seller agrees otherwise, only the specifications referred to in the quotation shall form part of the Contract.
10.2 The Seller reserves the right subject to giving prior written notice to the Buyer to modify the said specifications where
the Goods cannot in the opinion of the Seller be manufactured according to the said specifications and the Buyer
agrees to accept the Goods as manufactured according to the specifications so modified in satisfaction of the Sellers
obligations as to manufacture of the Goods under the Contract.
11. INTELLECTUAL PROPERTY
11.1 All specifications, drawings, designs and technical description, and all Information and know-how whatsoever
supplied by the Seller to the Buyer is as between the Seller and the Buyer the Sellers copyright and property and shall
at all times be treated by the Buyer as confidential and shall not without the prior written consent of the Seller be used
by the Buyer except for the purposes of the Contract.
11.2 The Buyer will indemnify the Seller against all actions claims demands costs charges, penalties, royalties and
expenses arising directly or indirectly or incurred by reason of any infringement or alleged infringement of or any right
attributable to any letters patent, registered design trade mark, trade name, copyright or proprietary right arising from
the use of any instructions, specifications or designs whether express or implied supplied by the Buyer to the Seller.
12. INSOLVENCY OF BUYER
12.1 This Condition applies if: -
12.1.1 the Buyer makes any voluntary arrangement with its creditors or (being an individual or firm) becomes
bankrupt or (being a company) becomes subject to an administration order or goes into liquidation (otherwise
than for the purposes of amalgamation or reconstruction); or
12.1.2 an encumbrancer takes possession or a receiver is appointed, of any of the property or assets of the Buyer; or
12.1.3 the Buyer ceases, or threatens to cease, to carry on business; or
12.1.4 the Seller reasonably apprehends that any of the events mentioned above is about to occur in relation to the
Buyer and notifies the Buyer accordingly.
12.2 If this Condition applies then, without prejudice to any other right or remedy available to the Seller, the Seller shall
be entitled to cancel the contract and suspend any further deliveries under the contract without any liability to the
Buyer, and if the Goods have been delivered but not paid for, all of the Sellers outstanding invoices to the Buyer
become immediately due and payable notwithstanding any previous agreement or arrangement to the contrary.
13. GENERAL
13.1 Any notice required or permitted to be given by either party to the other under these Conditions shall be in writing
addressed to that other party at his registered office or principal place of business or such other address as may at the
relevant time have been notified pursuant to this provision to the party giving the notice.
13.2 If any provision of these Conditions is held by any competent authority to be invalid or unenforceable in whole or in
part the validity of the other provisions of these Conditions shall remain in full force and effect.
13.3 No waiver by the Seller of any breach of the contract by the Buyer shall be considered as a waiver of any subsequent
breach of the same or any other provision.
13.4 A person who is not a party to the contract has no rights under the Contracts (Rights of Third Parties) Act 1999 to
enforce any term of these Conditions but this does not affect any right or remedy of a third party which exists or is
available apart from that Act).
13.5 These Conditions constitute the entire contract between the parties to the extent that the subject matter is dealt with
herein and may only be varied or modified in writing under the hands of the parties or their authorised representatives.
13.6 The contract shall be governed by the laws of England, and the Buyer agrees to submit to the non-exclusive
jurisdiction of the English courts.
New CAME products for
2005G8000 > automatic road barriers up to 8.0 metres
CBX > automation for industrial doors
TAM > multi-user radio transmitter
RBE 4 MT> radio receiver for up to 999 users
U4410GB > complete system for garage doors
A new concept in automatic barriersThe new CAME GARD series barrier implements all the recommendations of the new European
standards generated by the new Machine Directives, with the objective
of meeting the criteria of utmost modularity in terms of application and operations.
It is available in the 230V A.C. motor and the 24V D.C. motor versions, the latter particularly
ideal for frequent use.
STRENGTHS
STREET BARRIERSAUTOMATION
493 243
405
914
1355
1305
overall dimensions
G8000
7,6
m
08
G8000up to 7,6m
G8000up to 7,6m
INTEGRATION AND MODULARITY: photoelectric cells and command selectors are integrated with the automation, in perfect visual harmony.
EXCLUSIVE INCORPORATED FLASHING LAMP with a lighted LED diffuser. Combines design and modern lighting technology of illumination.
COMMAND ELECTRONICS positioned in a way to make any type of intervention particularly practical.
ANTI-SHEARING SECURITY mechanism in the point where the bar rotates.
SELF-MEMORIZATION of the radio code between the transmitter and the radio receiver.
ROUND TUBULAR BAR: for maximum reduction of the sail effect.
SAFETY LIGHTS: an electronic contact cuts off the illumination voltage once the inspection door is opened.
ENCODER: for the electronic control of the movement in the version with a 230V motor.
SPRING WITH DIFFERENTIATED SENSITIVITY: For supreme balancing of the shafts.
INTEGRATION AND MODULARITY EXCLUSIVITY
SAFETYPRACTICALITY
Type G2081 / G2081i G2080 / G2080i
Protection level IP54
Power supply 230V 50-60 Hz
Motor power supply 230V 50-60 Hz 24V D.C.
Rated power 330W 300W
Absorption 2,8 A 15 A
Reduction ratio 1/202 1/202
Traction force 250 Nm 600 Nm
Opening time 8 secs 48 secs
Operating intermittence 30% intensive service
Operating temperature -20C min. +70C max.
technical information
0115 9210430 0115 92104310115 9210430 0115 92104310115 9210430 0115 9210431Tel: Fax: CAME on orders to
yellow
barrier with 24V gearmotorG2080 Automatic barrier in zinc-plated and coated steel with 24V D.C.
gearmotor and casing complete with transformer and control board 1,080.00
G2080i Automatic barrier in brushed AISI 304 stainless steel with 24V D.C.gearmotor and casing complete with transformer and control board 1,825.00
control board for barriers with 24V motorZL38 Basic control board for barrier with 24V gearmotor 103.00
barrier with 230V gearmotorG2081 Automatic barrier in zinc-plated and coated steel with 230V A.C.
gearmotor and container for command card 1,020.00
G2081i Automatic barrier in brushed AISI 304 stainless steel with 230V A.C.gearmotor and container for command card 1,766.00
control board for barriers with 230V motorZG5 Control board Plus 108.00
ZG6 Control board Basic 86.00
RSE Function management control board (for ZG5) 15.00
balancing spring for barriers*G02040 40 mm balancing spring - yellow 38.00
G04060 50 mm balancing spring - red 49.00
G06080 55 mm balancing spring - green 65.00
finishing accessoriesG02801 Dome shaped flashing light unit for installation directly into the top of the standard barrier unit 31.00
G02802 Frame for applying the DIR photoelectric cell on the cabinet 8.00
G02805 Frame for emergency batteries 17.00
LB35 Emergency battery card for 12V-6Ah batteries (for G2080 / G2080i barriers) 32.00
G02000 Tubular bar in white coated aluminum 100, L. 2 m 70.00
G04000 Tubular bar in white coated aluminum 100, L. 4 m 140.00
G06801 Jointing block for the secure joining of two barrier arms together 15.00
G06802 Reinforcement for barrier end of arm where the total joined arm length will be greater than 5m 15.00
G02803 Illuminated lighting strip for in-feed directly into G02000 and G04000 per m 7.00Length of G02803 required = Length of barrier arm x 2 + 1 metre e.g. for 6m arm, 13m required.
G02804 Connection cable required for joining and connecting the required length of lighting strip. One only required per barrier. 5.00
G02806 Skirt in coated aluminum in 2 m long sections - not recommended in areas subjected to windy conditions 110.00
G02807 Fixed support for bar 70.00
G02808 Moveable support for bar 59.00
G02809 Package 20 red strips 18.00
CLEAR OPENING m
up to 7,6 m clear opening
G02040 40 mm spring
G04060 50 mm spring
G06080 55 mm spring
5m - 6m barfixed or moveablesupport required
> 6m bar fixed support required
N/A
N/A
N/A
N/A = Not Available
N/A
APPLIEDACCESSORIES
Spring 1Spring 2
Spring 1Spring 2
Spring 1Spring 2
Spring 1Spring 2
Spring 1Spring 2
Spring 1Spring 2
BAR
+ LAMPS
+ BARRIER SKIRT
+ LAMPS + MOVABLE SUPPORT
+ BARRIER SKIRT + LAMPS
+ MOVABLE SUPPORT
G8000 series: the complete range
*selection parameters of the springs for a correct balance of the barrier
AUTOMATIC GATES
09
G8000
7,6
mThe term bar stands for a complete barof the longitudinal slot guard and endcap. The bar joint is necessary beyond
a net span of 3.6 m.
G8000
7,6
m
10
Item code Description Qty
G2080 24V Barrier Unit 1
ZL38 24V Control Panel 1
G02801 Flashing Light 1
G04000 4m Barrier Arm Section 1
G02040 Yellow balancing spring (40mm diameter) 1
G04060 Green balancing spring (50mm diameter) 1
DIR10 Pair of safety photoelectric cells 1
GO2802 Photoelectric cell support bracket 1
GO2807 Fixed support for bar 1price excl. VAT
GARD8-4MKit Complete G8000 Barrier Kit - for 4m openings 1,648.00This price includes delivery anywhere in mainland UK.
G8000 4M kit includes
Item code Description Qty
G2080 24V Barrier Unit 1
ZL38 24V Control Panel 1
G02801 Flashing Light 1
G04000 4m Barrier Arm Section 1
G02000 2m Barrier Arm Section 1
G06801 Connecting joint for barrier sections 1
G06802 Reinforcement for barrier arm 1
G06080 Red balancing spring (55mm diameter) 1
G04060 Green balancing spring (50mm diameter) 1
DIR10 Pair of safety photoelectric cells 1
GO2802 Photoelectric cell support bracket 1
GO2807 Fixed support for bar 1price excl. VAT
GARD8-6MKit Complete G8000 Barrier Kit - for 6m openings 1,775.00 This price includes delivery anywhere in mainland UK.
G8000 6M kit includes
Item code Description Qty
G2080 24V Barrier Unit 1
ZL38 24V Control Panel 1
G02801 Flashing Light 1
G04000 4m Barrier Arm Section 2
G06801 Connecting joint for barrier sections 1
G06802 Reinforcement for barrier arm 1
G06080 Red balancing spring (55m diameter) 2
DIR10 Pair of safety photoelectric cells 1
GO2802 Photoelectric cell support bracket 1
GO2807 Fixed support for bar 1price excl. VAT
GARD8-8MKit Complete G8000 Barrier Kit - for 8m openings 1,863.00 This price includes delivery anywhere in mainland UK.
G8000 8M kit includes
G8000 COMPLETE KITSG8000 COMPLETE KITS4M kit contents:
6M kit contents:
8M kit contents:
No activation accessories are included in these standard kits. Thiskit can be controlled by any of the standard CAME accessories
listed in the commercial division section.
Battery back-up is also available for this kit.Please see page 9 for further information.
Please note: G02803 and G02804 barrier arm lighting shown inpicture is not included in this standard kit.
No activation accessories are included in these standard kits. Thiskit can be controlled by any of the standard CAME accessories
listed in the commercial division section.
Battery back-up is also available for this kit.Please see page 9 for further information.
Please note: G02803 and G02804 barrier arm lighting shown inpicture is not included in this standard kit.
No activation accessories are included in these standard kits. Thiskit can be controlled by any of the standard CAME accessories
listed in the commercial division section.
Battery back-up is also available for this kit.Please see page 9 for further information.
Please note: G02803 and G02804 barrier arm lighting shown inpicture is not included in this standard kit.
Automatic rising bollards shown above are also now available from CAME United Kingdom. Please see page 147 or ask our sales staff for a full URBACO catalogue. Alternatively visit www.urbaco.co.uk.
Exclusive automation for industrial entrancesThe new CBX system is designed especially for sectional doors with direct grip transmission and is
ideal for motor driving all types of industrial sliding and swing gate systems. Impeccable design and
engineering, with special attention and sensitivity to the directives dictated by the new European
regulations, have produced a system that offers the standard CAME characteristics and features and
completely innovative functions.
For special spaceneeds, CBX canalso be installedhorizontally.
New compact and essential design of thestructure.
Choice of three motor drives: 230V, 230Vthree phase and 24V.
ENCODER movement controls, in addition tothe mechanical end stops; this controlmakes a precise and constant adjustment ofthe end stop point, to ensure detection ofobstacles.
Lever release of the gearmotor, completewith suspended cord transmission systemor with personalized key device.
New winch device for manual operationswhich can also be used without the releaseof the gearmotor. It acts directly on the driveshaft and works equally well with horizontalor vertical automation.
STRENGTHS
LARGE INDUSTRIAL DOORSAUTOMATION
The exclusive
winch system for
manual handling.
The system works
equally well with
horizontal or vertical
automation.
CBX CBX
Type C-BXE C-BXE 24 C-BXET
Protection level IP54
Reduction gear type non-reversible
Weight 15 Kg 15 Kg 15 Kg
Power supply 230V 50/60 Hz 230-400V 50/60 Hz
Motor power supply 230V 50/60 Hz 24V D.C. 230-400V 50/60 Hz
Rated power 450W 360W 600W
Absorption 3A 15A max. 2A
Reduction ratio 1/131.75 1/131.75 1/131.75
Adjustment torque 35 Nm 85 Nm 35 Nm
Drive shaft revolutions 20 rpm 13 rpm 20 rpm
Travel 6.5 m 6.5 m 6.5 m
Operating intermittence 30% 50% 50%
Operating temperature -20C min. +70C max.
technical information
cbx series: the complete range
AUTOMATIC GATES
11
CB
X
230V operator and control panelsC-BXE 230V operator with encoder 415.00
ZCX10 Control panel for C-BXE 287.00
ZCX10C Control panel with safety block for C-BXE 378.00
24V operator and control panelsC-BXE24 Operator with encoder 523.00
ZL80 Control panel for C-BXE24 329.00
ZL80C Control panel with safety block for C-BXE24 424.00
230/400V 3 phase operator and control panelsC-BXET Three-phase operator with encoder 445.00
ZT5 Control panel for C-BXET 377.00
ZT5C Control panel with safety block for C-BXET 472.00
mounting accessoriesCMS Release handle with personalized key and transmission cord (7 m long) 77.10
CGP Chain guide with guard for protecting LARGE SLIDING DOORS 46.50
CCT Simple 1/2 chain for LARGE FOLDING DOORS AND LARGE SLIDING DOORS 11.70
CGIU Joint for 1/2 chain 1.30
C001 Winch for manual operations (13 m chain) for LARGE DOORS 102.00
C002 Pendulum release system 27.00
C003 Shaft with Z26 pinion for gearmotor shaft, chain tightener transmission system,fastening brackets for securing the gearmotor and to the panel of the SLIDING DOOR 120.00
C004 Shaft with Z26 pinion for gearmotor shaft, chain tightener transmission system, fasteningbrackets for securing the gearmotor and hinge pins for the FOLDING DOOR panels 118.00
C005 Shaft with Z26 pinion for gearmotor, Z45 pinion with chain and 1/2 joint (for spring holder shaft) for chain drive on SECTIONAL DOORS 60.00
C006 Package with a Z26 pinion with 1/2 chain and joint for FANLIGHT WINDOWS AND AWNING WINDOWS 11.00
285
107,5
151
129
347
75,5
overall dimensions
RADIO RECIEVER
RBE 4MTRBE 4MTThe radio receiver becomes an
access control deviceThe new CAME four-channel radio receiver at a frequency
of 433.92 MHz is the ideal solution for managing automatic
openings in condominiums and communities for systems
of up to 999 users.
An internal display enables fast storage of the transmitters and system maintenanceeven after time.
Option to programme the entire system by PC software. The system includes a memory roll for a security archive of the stored codes. Access to programming is protected by a security password. Compatible with all CAME transmitters of the TOP432SA, TOP434MA, TOP432M,
TOP434M, TOP432S, T432, T434, T438, and T432SA Series. The equipment can be fitted with specific software for planning and managing the
systems via PC.
STRENGTHSType RBE4MT
Protection level IP54
Frequency 433.92 MHz
Range with antenna 100-150 m
Number of channels 4
Size 115x225x87 mm
Operating temperature -25C min. +70C max.
Material / Weight abs
technical information
RBE4MT Multi-user 433.92 MHz radio receiver 999 codes/users 165.00
RB
E 4
MT
12
TA
M 4
32SA
RADIO CONTROL
TAM TAMA happy marriage of elegance,
functionality and technologyJust 12 grams, 16 million possible combinations for the personal code:
the new CAME radio control is a concentration of unparalleled
multi-user technological research.
Ergonomic thanks to its easy-to-grasp shape and the dramatically reduced dimensions.
Elegant and stylish with a special CAME exclusive SOFT TOUCH finish.
Great autonomy of operation with a double lithium battery.
It quickly and automatically stores the personal code via radio for a very fastmemorization of the receiver and duplication of the system transmitters.
Compatible with TAM Radio series system.
Uses AF43S frequency card.
STRENGTHSType TAM432SA
Frequency 433.92 MHz
Range 50 150 m
Batteries n 2 CR2016 3V d.c. Litio
Size 24x68x12,5 mm
Possible code combinations 16.777.216
Operating temperature -20C min. +70C max.
Material / Weight abs / 12g
technical information
TAM432SA Dual channel transmitter 433.92 MHz self storing 29.00
The most economical formulaThis is the V900E, the new version of VER that CAME is
proposing for 2005, in line with the philosophy of
made-to-measure automation. Convenience is a
significant variable in making the choice of automation.
This is why, in the continuous integration of the range of
offers, CAME has conceived an economic alternative to the
traditional standard for overhead and sectional doors.
These alternatives feature several simplified functions, but
the same reliability and safety guarantee as always.
COMPLETE KIT
U4410GBU4410GBAUTOMATIC GATES
13
CO
MP
LE
TE
KIT
operational limitsCounter-weighted and
spring-assistedoverhead doors,
with partial re-entry over-edge movementYES with art. V201*
H door max 2,4 m
Spring-assistedoverhead doors,
with partial re-entry over-edge movement
YESH door max 2,25 m
Counter-weightedoverhead doors,
with partial re-entry over-edge movement
NO
Sectional doors
YESH garage door
Type A max 2,1 m*Type B max 2,2 m**
*V201 Transmission adapter arm for overhead doors, with partial over-edge movement (page 66)
complete set equipment U4410GBItem code Description QtyV900E Gearmotor complete with control panel with 1
encoder and incorporated lamp
V0679 Chain guide L=3.52 m 1AF43S Plug in 433.92 MHz radio card 1TOP-432SA Multi-user radio transmitter, 433.92 MHz 1
price excl. VATU4410GB Complete automation for 229.00
overhead and sectional doors
H
TYPE A
H
TYPE B
SINGLE-GUIDE SECTIONAL DOORS * DOUBLE-GUIDE SECTIONAL DOORS **
Each of these sections is independent andcomplete in itself; each contains the specificproduct lines for every context, with details aboutthe technical characteristics, performance anduses, in addition to much more.
The operator will also find ready-to-use systemsolutions to offer to the customer, in the variousstandards from the basic to the full optional. Buttheres more: every product is furnished with therespective guide to automation that illustrationsthe typical installation of the system proposed andits accessories, guiding the installer on making acorrect risk analysis while complying with thesafety regulations. All with a clear and intuitivegraphic.
one single price list for 2005a complete automation guideto the products and their correct operation
All productshave been groupedinto four specific areas of application:
The new CAME United Kingdom PRICE LIST aims toprovide complete and organised access to the vastpanorama of solutions that the CAME brandrepresents, offering professionals a comprehensive,clear and easy-to-consult guide. This is an authenticpromotional and operating tool, designed to providethe answer to any need for automation and orient thecustomer toward a made-to-measure solution.
0115 9210430 0115 92104310115 9210430 0115 92104310115 9210430 0115 9210431Tel: Fax: CAME on orders to
residentialdivision
completeautomation kits
commercialdivision
car-parks and access
controldivision
residentialdivision
completeautomation kits
commercialdivision
car-parks and access
controldivision
completeautomation kits
Pric
elis
t2005
UMC GROUP
The installation illustrated displays itemsthat are not necessarily supplied in thestandard kits we offer. All listed equipment isavailable separately.
Safety photocells Photocell column
Flashing light Antenna
Safety photocells
FROG Gearmotor Foundation case Release
Keyswitch
Control panel Radio receiver
Electric cables junction box
Radio transmitter
FROG UNDERGROUNDcomplete underground
automatic control system forswing gates
for gates up to 3.5 m each leaf
FROG UNDERGROUND230V KITS - REGULAR USAGEoperational limits for all 4 FROG kits
WING WIDTH WING WEIGHT
2.00 m 800 kg
2.50* m 600 kg
3.50* m 400 kg
* We recommend provision be made for an electric lock if the wing is wider than 2 m.
CO
MP
LE
TE
KIT
S
16
Item code Description Qty
FROG-B Underground foundation casing coated in zinc 2
FROG-A Underground 230V motor including link arm 2
A4365 Triangular key manual release mechanism 2
S4340 Casing in ABS (mm L 240 x H 320) complete with transformer 1
ZA4 Electronic circuit board 1
AF43S Plug in 433.92 MHz radio card 1
T432SA Radio transmitters for 433.92 MHz 2
TA433N Radio antenna for 433.92 MHz 1
DIR10 Pair of safety photoelectric cells 1price excl. VAT
FROG-P Complete underground pair of gates 1,167.50automation kit.
FROG-P kit includes
Item code Description Qty
FROG-B Underground foundation casing coated in zinc 1
FROG-A Underground 230V motor including link arm 1
A4365 Triangular key manual release mechanism 1
S4340 Casing in ABS (mm L 240 x H 320) complete with transformer 1
ZA5 Electronic circuit board 1
AF43S Plug in 433.92 MHz radio card 1
T432SA Radio transmitters for 433.92 MHz 2
TA433N Radio antenna for 433.92 MHz 1
DIR10 Pair of safety photoelectric cells 1price excl. VAT
FROG-S Complete underground single gate 723.90automation kit.
FROG-S kit includes
FROG-P kit contents:
FROG-S kit contents:
AUTOMATIC GATES
0115 9210430 0115 92104310115 9210430 0115 92104310115 9210430 0115 9210431Tel: Fax: CAME on orders to
Certain items listed in the above kits, namely control board, remote controls or safety photocells, may be substituted without prior notice for a comparative alternative if the advertised item code is temporarily out of stock.
Electric cablesjunction box
Radio transmitter Magnetic loop sensor
Safety photocells (H=0,5/1 m)
Safety photocells Photocell column
(H=0,5 m) Column extension
FROG A24 Gearmotor Foundation case Release
Flashing light Antenna
Keyswitch
Control panel Emergency operation
device Radio receiver Batteries
The installation illustrated displays items that are not necessarily supplied in thestandard kits we offer. All listed equipment is available separately.
INTENSIVE USAGE - 24V D.C. KITS
CO
MP
LE
TE
KIT
S
GATE AUTOMATION KITS
complete 24V DC undergroundautomatic control systems for
swing gates
for gates up to 3.5 m each leaf
GATE AUTOMATION KITS
for full FROGtechnical specification andoperational limits for allkits on these pages see
page 34.
17
Item code Description Qty
FROG-B Underground foundation casing coated in zinc 2
FROG-A24 Underground 24V DC motor including link arm 2
A4365 Triangular key manual release mechanism 2
ZL19 Electronic circuit board including casing and transformer 1
AF43S Plug in 433.92 MHz radio card 1
T432SA Radio transmitters for 433.92 MHz 2
TA433N Radio antenna for 433.92 MHz 1
DIR10 Pair of safety photoelectric cells 1price excl. VAT
FROG-P24 Complete 24V DC underground pair of gates 1,365.00automation kit.
FROG-P24 kit includes
Item code Description Qty
FROG-B Underground foundation casing coated in zinc 1
FROG-A24 Underground 24V DC motor including link arm 1
A4365 Triangular key manual release mechanism 1
ZL170 Electronic circuit board including casing and transformer 1
AF43S Plug in 433.92 MHz radio card 1
T432SA Radio transmitters for 433.92 MHz 2
TA433N Radio antenna for 433.92 MHz 1
DIR10 Pair of safety photoelectric cells 1price excl. VAT
FROG-S24 Complete 24V DC underground single gate 768.00automation kit.
FROG-S24 kit includes
FROG-P24 kit contents:
FROG-S24 kit contents:
Emergency battery backup available as an optional extra. See page 34 for details.
Emergency battery backup available as an optional extra. See page 34 for details.
page 71 page 77page 76 page 78page 72
to 75
AUTOMATIC GATES
Certain items listed in the above kits, namely control board, remote controls or safety photocells, may be substituted without prior notice for a comparative alternative if the advertised item code is temporarily out of stock.
The installation illustrated displays items that are not necessarily supplied in the standard kits we offer.All listed equipment is available separately.
Keyswitch
Flashing light Antenna
Electric cablesjunction box
Controlpanel
Radioreceiver
Safety photocells Radio transmitter
Safety sensitive profile
F1000 Gearmotor
FERNI ARTICULATED ARM
complete articulated armautomatic control system for
swing gates
for gates up to 4.0 m each leaf
FERNI ARTICULATED ARM230V KITS - REGULAR USAGEoperational limits for all 4 FERNI kits
WING WIDTH WING WEIGHT
2,00 m 800 kg
2,50* m 600 kg
4,00* m 400 kg
* We recommend provision be made for an electric lock if the wing is wider than 2 m.
Item code Description Qty
F1000 230V self locking operator 2
S4340 Casing in ABS (mm L 240 x H 320) complete with transformer 1
ZF1 Electronic circuit board 1
AF43S Plug in 433.92 MHz radio card 1
T432SA Radio transmitters for 433.92 MHz 2
TA433N Radio antenna for 433.92 MHz 1
DIR10 Pair of safety photoelectric cells 1price excl. VAT
FERNI-P Complete pair of gates 1,008.46automation kit.
FERNI-P kit includes
Item code Description Qty
F1000 230V self locking operator 1
S4340 Casing in ABS (mm L 240 x H 320) complete with transformer 1
ZA5 Electronic circuit board 1
AF43S Plug in 433.92 MHz radio card 1
T432SA Radio transmitters for 433.92 MHz 2
TA433N Radio antenna for 433.92 MHz 1
DIR10 Pair of safety photoelectric cells 1price excl. VAT
FERNI-S Complete single gate 636.46automation kit.
FERNI-S kit includes
FERNI-P kit contents:
FERNI-S kit contents:
CO
MP
LE
TE
KIT
S
18
AUTOMATIC GATES
0115 9210430 0115 92104310115 9210430 0115 92104310115 9210430 0115 9210431Tel: Fax: CAME on orders to
Certain items listed in the above kits, namely control board, remote controls or safety photocells, may be substituted without prior notice for a comparative alternative if the advertised item code is temporarily out of stock.
Radiotransmitter
Flashing light Antenna
External release Keyswitch
F1024 Gearmotor
Safety photocells(H=0,5/1 m)
Photocell column Column extension
Keyswitch Selector column
(H=1 m)
Electric cablesjunction box
The installation illustrated displays items that are not necessarily supplied in thestandard kits we offer. All listed equipment is available separately.
INTENSIVE USAGE - 24V D.C. KITS GATE AUTOMATION KITS
complete 24V DC articulatedarm automatic control system
for swing gates
for gates up to 4.0 m each leaf
GATE AUTOMATION KITS
for full FERNItechnical specification andoperational limits for allkits on these pages see
page 44.
Item code Description Qty
F1024 24V DC self locking operator 2
ZL19 Electronic circuit board including casing and transformer 1
AF43S Plug in 433.92 MHz radio card 1
T432SA Radio transmitters for 433.92 MHz 2
TA433N Radio antenna for 433.92 MHz 1
DIR10 Pair of safety photoelectric cells 1price excl. VAT
FERNI-P24 Complete 24V DC pair of gates 1,234.00automation kit.
FERNI-P24 kit includes
Item code Description Qty
F1024 24V DC self locking operator 1
ZL170 Electronic circuit board including casing and transformer 1
AF43S Plug in 433.92 MHz radio card 1
T432SA Radio transmitters for 433.92 MHz 2
TA433N Radio antenna for 433.92 MHz 1
DIR10 Pair of safety photoelectric cells 1price excl. VAT
FERNI-S24 Complete 24V DC single gate 702.00automation kit.
FERNI-S24 kit includes
FERNI-P24 kit contents:
FERNI-S24 kit contents:
CO
MP
LE
TE
KIT
S
19
Emergency battery backup available as an optional extra. See page 44 for details.
Emergency battery backup available as an optional extra. See page 44 for details.
Control panel Emergency operation
device Radio receiver Batteries
page 71 page 77page 76 page 78page 72
to 75
AUTOMATIC GATES
Certain items listed in the above kits, namely control board, remote controls or safety photocells, may be substituted without prior notice for a comparative alternative if the advertised item code is temporarily out of stock.
The installation illustrated displays items that are not necessarily supplied inthe standard kits we offer. All listed equipment is available separately.
Flashing light Antenna
A5000A Gearmotor Release
Safety photocells
Keyswitch
Control panel Radio receiver
Radio transmitter Electric cables
junction box
Safety photocells Photocell column
ATI 5M WORM DRIVEcomplete worm drive
automatic control system for5M swing gates
for gates up to 5.0 m each leaf
ATI 5M WORM DRIVE230V KITS - REGULAR USAGEoperational limits for all 4 ATI kits
Item code Description Qty
A5000A 230V self locking operator 2
S4340 Casing in ABS (mm L 240 x H 320) complete with transformer 1
ZF1 Electronic circuit board 1
AF43S Plug in 433.92 MHz radio card 1
T432SA Radio transmitters for 433.92 MHz 2
TA433N Radio antenna for 433.92 MHz 1
DIR10 Pair of safety photoelectric cells 1price excl. VAT
ATI-P Complete pair of gates 866.46automation kit.
ATI-P kit includes
Item code Description Qty
A5000A 230V self locking operator 1
S4340 Casing in ABS (mm L 240 x H 320) complete with transformer 1
ZA5 Electronic circuit board 1
AF43S Plug in 433.92 MHz radio card 1
T432SA Radio transmitters for 433.92 MHz 2
TA433N Radio antenna for 433.92 MHz 1
DIR10 Pair of safety photoelectric cells 1price excl. VAT
ATI-S Complete single gate 565.46automation kit.
ATI-S kit includes
ATI-P kit contents:
ATI-S kit contents:
CO
MP
LE
TE
KIT
S
20
*WING WIDTH WING WEIGHT
2,00 m 1000 kg
2,50 m 800 kg
3,00 m 600 kg
4,00* m 500 kg
5,00* m 400 kg
* We recommend provision be made for an electric lock if the wing is wider than 3 m.
AUTOMATIC GATES
0115 9210430 0115 92104310115 9210430 0115 92104310115 9210430 0115 9210431Tel: Fax: CAME on orders to
Certain items listed in the above kits, namely control board, remote controls or safety photocells, may be substituted without prior notice for a comparative alternative if the advertised item code is temporarily out of stock.
Photocell column Column extension
Flashing light Antenna
Radio receiver Control panel A5024 Gearmotor
Safety photocells(H=0,5/1 m)
Cord-operated external release
Magnetic loop sensor
Safetyphotocells (H=0,5/1 m)
Electric cablesjunction box
Emergencyoperation device
Batteries Radio transmitter
The installation illustrated displays items that are not necessarily suppliedin the standard kits we offer. All listed equipment is available separately.
INTENSIVE USAGE - 24V D.C. KITS GATE AUTOMATION KITS
complete 24V DC worm driveautomatic control system for
5M swing gates
for gates up to 5.0 m each leaf
GATE AUTOMATION KITS
for full ATItechnical specification andoperational limits for allkits on these pages see
page 90.
Item code Description Qty
A5024 24V DC self locking operator 2
ZL19 Electronic circuit board including casing and transformer 1
AF43S Plug in 433.92 MHz radio card 1
T432SA Radio transmitters for 433.92 MHz 2
TA433N Radio antenna for 433.92 MHz 1
DIR10 Pair of safety photoelectric cells 1price excl. VAT
ATI-P24 Complete 24V DC pair of gates 1,058.00automation kit.
ATI-P24 kit includes
Item code Description Qty
A5024 24V DC self locking operator 1
ZL170 Electronic circuit board including casing and transformer 1
AF43S Plug in 433.92 MHz radio card 1
T432SA Radio transmitters for 433.92 MHz 2
TA433N Radio antenna for 433.92 MHz 1
DIR10 Pair of safety photoelectric cells 1price excl. VAT
ATI-S24 Complete 24V DC single gate 614.00automation kit.
ATI-S24 kit includes
ATI-P24 kit contents:
ATI-S24 kit contents:
CO
MP
LE
TE
KIT
S
21
Emergency battery backup available as an optional extra. See page 90 for details.
Emergency battery backup available as an optional extra. See page 90 for details.
page 71 page 77page 76 page 78page 72
to 75
AUTOMATIC GATES
Certain items listed in the above kits, namely control board, remote controls or safety photocells, may be substituted without prior notice for a comparative alternative if the advertised item code is temporarily out of stock.
Photocellcolumn
Columnextension
Flashing light Antenna
Radio receiver Control panel
A3000A Gearmotor
Safety photocells (H=0,5/1 m)
Keyswitch
Radio transmitter
Keyswitch Selector column (H=1 m)
Safety photocells (H=0,5/1 m)
Electric cablesjunction box
The installation illustrated displays items that are notnecessarily supplied in the standard kits we offer. All listedequipment is available separately.
ATI 3M WORM DRIVEcomplete worm drive
automatic control system for3M swing gates
for gates up to 3.0 m each leaf
ATI 3M WORM DRIVE230V KITS - REGULAR USAGEoperational limits for all 4 ATI kits
*WING WIDTH WING WEIGHT
2,00 m 800 kg
2,50 m 600 kg
3,00* m 400 kg
* We recommend provision be made for an electric lock if the wing is wider than 2.5 m.
Item code Description Qty
A3000A 230V self locking operator 2
S4340 Casing in ABS (mm L 240 x H 320) complete with transformer 1
ZF1 Electronic circuit board 1
AF43S Plug in 433.92 MHz radio card 1
T432SA Radio transmitters for 433.92 MHz 2
TA433N Radio antenna for 433.92 MHz 1
DIR10 Pair of safety photoelectric cells 1price excl. VAT
ATI-P3 Complete pair of gates 831.40automation kit.
ATI-P3 kit includes
Item code Description Qty
A3000A 230V self locking operator 1
S4340 Casing in ABS (mm L 240 x H 320) complete with transformer 1
ZA5 Electronic circuit board 1
AF43S Plug in 433.92 MHz radio card 1
T432SA Radio transmitters for 433.92 MHz 2
TA433N Radio antenna for 433.92 MHz 1
DIR10 Pair of safety photoelectric cells 1price excl. VAT
ATI-S3 Complete pair of gates 530.75automation kit.
ATI-S3 kit includes
ATI-P3 kit contents:
ATI-S3 kit contents:
CO
MP
LE
TE
KIT
S
22
AUTOMATIC GATES
0115 9210430 0115 92104310115 9210430 0115 92104310115 9210430 0115 9210431Tel: Fax: CAME on orders to
Certain items listed in the above kits, namely control board, remote controls or safety photocells, may be substituted without prior notice for a comparative alternative if the advertised item code is temporarily out of stock.
Flashing light Antenna
A3024 Gearmotor Release
Safety photocells
Keyswitch
Control panel Radio receiver Emergency
operation device Batteries
Safety photocells Photocell column
Radio transmitter
Keyswitch Selector column (H=1 m)
Electric cablesjunction box
The installation illustrated displays items that are notnecessarily supplied in the standard kits we offer. All listedequipment is available separately.
INTENSIVE USAGE - 24V D.C. KITS GATE AUTOMATION KITS
complete 24V DC worm driveautomatic control system for
3M swing gates
for gates up to 3.0 m each leaf
GATE AUTOMATION KITS
for full ATItechnical specification andoperational limits for allkits on these pages see
page 44.
Item code Description Qty
A3024 24V DC self locking operator 2
ZL19 Electronic circuit board including casing and transformer 1
AF43S Plug in 433.92 MHz radio card 1
T432SA Radio transmitters for 433.92 MHz 2
TA433N Radio antenna for 433.92 MHz 1
DIR10 Pair of safety photoelectric cells 1price excl. VAT
ATI-P324 Complete 24V DC pair of gates 1,030.00automation kit.
ATI-P324 kit includes
Item code Description Qty
A3024 24V DC self locking operator 1
ZL170 Electronic circuit board including casing and transformer 1
AF43S Plug in 433.92 MHz radio card 1
T432SA Radio transmitters for 433.92 MHz 2
TA433N Radio antenna for 433.92 MHz 1
DIR10 Pair of safety photoelectric cells 1price excl. VAT
ATI-S324 Complete 24V DC single gate 600.00automation kit.
ATI-S324 kit includes
ATI-P324 kit contents:
ATI-S324 kit contents:
CO
MP
LE
TE
KIT
S
23
Emergency battery backup available as an optional extra. See page 44 for details.
Emergency battery backup available as an optional extra. See page 44 for details.
page 71 page 77page 76 page 78page 72
to 75
AUTOMATIC GATES
Certain items listed in the above kits, namely control board, remote controls or safety photocells, may be substituted without prior notice for a comparative alternative if the advertised item code is temporarily out of stock.
Flashing light Antenna
Radio transmitter
KRONO automation Release
Keyswitch
Safety photocells
Control panelRadio receiver
Electric cablesjunction box
Safety photocells Photocell column
CO
MP
LE
TE
KIT
S
24
The installation illustrated displays items that are not necessarily supplied inthe standard kits we offer. All listed equipment is available separately.
complete articulated armautomatic control system for
3M swing gates
for gates up to 3.0 m each leaf
KRONO WORM DRIVE GATE AUTOMATION KITSKRONO WORM DRIVE GATE AUTOMATION KITS230V 3M KITS FOR REGULAR USAGE
operational limits for both KRONO kits
Item code Description Qty
KR300D Left-hand operator 230V 1
KR300S Right-hand operator 230V 1
S4339 Casing in ABS complete with transformer 1
ZA3 Electronic circuit board 1
AF43S Plug in 433.92 MHz radio card 1
TOP-432SA Radio transmitters for 433.92 MHz 2
TOP-A433N Radio antenna for 433.92 MHz 1
SET-J Keyswitch 1
DIR10 Safety photoelectric cell 1
KIARON Flashing light 1price excl. VAT
KRONO-P3 Complete automatic control system 754.00for two leaf swing gates
KRONO-P3 kit includes
Item code Description Qty
KR300D Left-hand operator 230V 1
KR300S Right-hand operator 230V 1
S4339 Casing in ABS complete with transformer 1
ZA4 Electronic circuit board 1
AF43S Plug in 433.92 MHz radio card 1
TOP-432SA Radio transmitters for 433.92 MHz 1
TOP-A433N Radio antenna for 433.92 MHz 1
DIR10 Safety photoelectric cell 1
KIARON Flashing light 1price excl. VAT
KRONO-P Complete automatic control system 672.00for two leaf swing gates
KRONO-P kit includesKRONO-P kit contents:
KRONO-P3 kit contents:
For full KRONO technical specification and operational limits for all kits on this page see page 48.
For full KRONO technical specification and operational limits for all kits on this page see page 48.
WING WIDTH WING WEIGHT
2,00 m 800 Kg
2,50 m 600 Kg
3,00* m 400 Kg
* We recommend provision be made for an electric lock if the wing is wider than 2.5 m.
AUTOMATIC GATES
0115 9210430 0115 92104310115 9210430 0115 92104310115 9210430 0115 9210431Tel: Fax: CAME on orders to
Certain items listed in the above kits, namely control board, remote controls or safety photocells, may be substituted without prior notice for a comparative alternative if the advertised item code is temporarily out of stock.
Safety photocells Photocell column
F7001 Gearmotor Straight arm
Radio transmitter
Electric cablesjunction box
F7000 Gearmotor Control panel Radio receiver Curved arm
Keyswitch
Flashing light Antenna
Safety photocells
Safety sensitive profile
25
CO
MP
LE
TE
KIT
S
Item code Description Qty
F7001 Operator 230V 2
AF43S Plug in 433.92 MHz radio card 1
TOP-432SA Radio transmitters for 433.92 MHz 2
ZA3 Electronic circuit board 1
S4339 Casing in ABS complete with transformer 1
SET-J Keyswitch 1
DIR10 Modulated infra-red photoelectric cell. Range: 10 m 1
KIARO N Flashing light 1
TOP-A433N Radio antenna for 433.92 MHz 1
TOP-RG58 Cable for antenna connection 5 mprice excl. VAT
FAST-P3 Kit Complete automatic control system 899.00for two leaf swing gates (up to 2.3 m each leaf)
FAST-P3 kit includes
Item code Description Qty
F7000 Operator 230V with built in control panel 1
F7001 Operator 230V 1
AF43S Plug in 433.92 MHz radio card 1
TOP-432SA Radio transmitters for 433.92 MHz 2
TOP-A433N Radio antenna for 433.92 MHz 1
DIR10 Modulated infra-red photoelectric cell. Range: 10 m 1
KIARON Flashing light 1price excl. VAT
FAST-P Kit Complete automatic control system 790.00for two leaf swing gates (up to 2.3 m each leaf)
FAST-P kit includes
FASTARTICULATED ARM GATE AUTOMATION KITSFASTARTICULATED ARM GATE AUTOMATION KITS230V REGULAR USAGE KITS
complete automatic controlsystem with articulated arms,for gates with 2 swing leaves
for gates up to 2.3 m each leaf
operational limits for both FAST kitsWING WIDTH WING WEIGHT
1,00 m 300 kg
1,50 m 250 kg
2,00 m 215 kg
2,30 m 200 kg
FAST-P3 kit contents:
The installation illustrated displays items that are notnecessarily supplied in the standard kits we offer. All listedequipment is available separately.
page 71 page 77page 76 page 78page 72
to 75
For full FAST technical specification and operational limits for all kits on this page see page 54.
For full FAST technical specification and operational limits for all kits on this page see page 54.
FAST-P kit contents:
AUTOMATIC GATES
Certain items listed in the above kits, namely control board, remote controls or safety photocells, may be substituted without prior notice for a comparative alternative if the advertised item code is temporarily out of stock.
Radio transmitter
Rack unit Mechanical limit-switch
Safety photocells Photocell column
Electric cables junction box Safety photocells
Flashing light Antenna
Keyswitch Safety sensitive profile
BX automation Control panel Radio receiver
Item code Description Qty
BX-A Operator 230V
ZBX-7 Electronic circuit board 1
AF 43S Plug in 433.92 MHz radio card 1
TOP-432SA Radio transmitter for 433.92 MHz 2
TOP-A433N Radio antenna receiver for 433.92 MHz 1
DIR10 Pair of safety photoelectric cells 1price excl. VAT
BX-A Kit Complete system for sliding gates up to 400 Kg 523.00For sliding gate toothed rack please see page 39 for options and prices.
BX-A kit: (for gates up to 400kg)
Item code Description Qty
BX-B / BX-E Operator 230V manual limits / with automatic encoder 1
ZBX-7 Electronic circuit board 1
AF 43S Plug in 433.92 MHz radio card 1
TOP-432SA Radio transmitter for 433.92 MHz 2
TOP-A433N Radio antenna receiver for 433.92 MHz 1
DIR10 Pair of safety photoelectric cells 1price excl. VAT
BX-B Kit Complete system for sliding gate up to 800 Kg 552.00(Manual limit switches)
BX-E Kit Complete system for sliding gate up to 800 Kg 640.00(With automatic encoder)
For sliding gate toothed rack please see page 39 for options and prices.
BX-B / BX-E kits: (for gates up to 800kg)
The installation illustrated displays items that arenot necessarily supplied in the standard kits weoffer. All listed equipment is available separately.
BX & BK SLIDINGcomplete sliding gate
automation kits
for gates up to 800kg
BX & BK SLIDING
BX-A kit contents:
BX-B / BX-E kit contents:
Item code Description Qty
BK800 230V automation 1
AF43S Plug-in 433.92MHz radio card 1
TA433N Radio antenna for 433.92 MHz 1
T432SA 2-channel multi-user transmitter 2
DIR10 Pair of safety photoelectric cells 1price excl. VAT
BK-800 Kit Complete sliding gate automation kit. 803.00For sliding gate toothed rack please see page 41 for options and prices.
BK-800 kit: (for gates up to 800kg)BK-800 kit contents:
CO
MP
LE
TE
KIT
S
26
operational limits for kitsType BXA BXB BK800
Max. gate weight 400 kg 600-800*kg 800kg
* 600 kg condominium / 800 kg residential.
HIGHINTENSITY
USAGE
HIGHINTENSITY
USAGE
For full BX technical specification and operational limits for all kits on this page see page 36.
For full BX technical specification and operational limits for all kits on this page see page 36.
For full BK800 technical specification and operational limits for all kits on this page see page 40.
AUTOMATIC GATES
0115 9210430 0115 92104310115 9210430 0115 92104310115 9210430 0115 9210431Tel: Fax: CAME on orders to
Certain items listed in the above kits, namely control board, remote controls or safety photocells, may be substituted without prior notice for a comparative alternative if the advertised item code is temporarily out of stock.
Radio transmitter
Rack unit
Antenna Flashing light Antenna
Keyswitch
Item code Description Qty
BK1200 / BKE1200 230V automation 1
AF43S Plug-in 433.92MHz radio card 1
TA433N Radio antenna for 433.92 MHz 1
T432SA 2-channel multi-user transmitter 2
DIR10 Pair of safety photoelectric cells 1price excl. VAT
BK-1200 Kit Complete sliding gate automation kit. 650.90(Manual limit switches)
BKE-1200 Kit Complete sliding gate automation kit. 744.10(With automatic encoder)
For sliding gate toothed rack please see page 85 for options and prices.
BK-1200 / BKE-1200 kits: (up to 1200kg)
Item code Description Qty
BK1800 / BKE1800 230V automation 1
AF43S Plug-in 433.92MHz radio card 1
TA433N Radio antenna for 433.92 MHz 1
T432SA 2-channel multi-user transmitter 2
DIR10 Pair of safety photoelectric cells 1price excl. VAT
BK-1800 Kit Complete sliding gate automation kit. 703.90(Manual limit switches)
BKE-1800 Kit Complete sliding gate automation kit. 788.80(With automatic encoder)
For sliding gate toothed rack please see page 85 for options and prices.
BK-1800 / BKE-1800 kits: (up to 1800kg)
Item code Description Qty
BK2200 / BKE2200 230V automation 1
AF43S Plug-in 433.92MHz radio card 1
TA433N Radio antenna for 433.92 MHz 1
T432SA 2-channel multi-user transmitter 2
DIR10 Pair of safety photoelectric cells 1price excl. VAT
BK-2200 Kit Complete sliding gate automation kit. 767.90(Manual limit switches)
BKE-2200 Kit Complete sliding gate automation kit. 851.80(With automatic encoder)
For sliding gate toothed rack please see page 85 for options and prices.
BK-2200 / BKE-2200 kits: (up to 2200kg)
The installation illustrated displays items that arenot necessarily supplied in the standard kits weoffer. All listed equipment is available separately.
GATE AUTOMATION KITScomplete sliding gate
automation kits
for gates up to 2200kg
GATE AUTOMATION KITS
BK/BKE-1200 kit contents:
BK/BKE-1800 kit contents:
BK/BKE-2200 kit contents:
27
CO
MP
LE
TE
KIT
S
operational limitsType BK1200 BK1800 BK2200
Max. gate weight 1.200 kg 1.800 kg 2.200 kg
BK automation Control panel Radio receiver
Safety sensitive profile Electric cablesjunction box
Safety photocells Photocell column
page 85 page 77page 76 page 78page 72
to 75
For full BK / BKE technical specification and operational limits for all kits on this page see page 82.
For full BK / BKE technical specification and operational limits for all kits on this page see page 82.
For full BK / BKE technical specification and operational limits for all kits on this page see page 82.
AUTOMATIC GATES
Certain items listed in the above kits, namely control board, remote controls or safety photocells, may be substituted without prior notice for a comparative alternative if the advertised item code is temporarily out of stock.
CO
MP
LE
TE
KIT
S
28
complete automatic controlsystem with articulated arms
for one leaf swing gates
for gates up to 1.6 m each leaf
complete automatic controlsystem with articulated arms
for two leaf swing gates
for gates up to 1.6 m each leaf
COMPLETE KITS
U8600U8711U8600U8711
Item code Description Qty
F500 Operator 24V DC 1
ZL160 Control panel 1
S0001 One channel control card 1
S7000 Keypad 1price excl. VAT
U8600 Complete automatic control system with articulated 362.00arms, for gate with 1 leaf swing gates up to 1.6 m.
kit U8600 includes
Item code Description Qty
F500 Operators 24V DC 2
ZL150 Control panel 1
AF43S Plug in 433.92 MHz radio card 1
TOP-432SA Radio transmitters for 433.92 MHz 1
TOP-A433N Radio antenna receiver for 433.92 MHz 1
TOP-RG58 Cable for antenna connection 5 m
LOCK82 Electric locking device 1
SET-E Keyswitch unit for external installation 1
DOC-E Safety photoelectric cell 1
KIARO24N Flashing light 1price excl. VAT
U8711 Complete automatic control system for 2 leaf swing gates 729.00with control and safety accessories (up to 1.6 m each leaf)
kit U8711 includes
for full FLEXtechnical specification andoperational limits for both
kits on this page see page 42.
0115 9210430 0115 92104310115 9210430 0115 92104310115 9210430 0115 9210431Tel: Fax: CAME on orders to
Certain items listed in the above kits, namely control board, remote controls or safety photocells, may be substituted without prior notice for a comparative alternative if the advertised item code is temporarily out of stock.
AUTOMATIC GATES
29
CO
MP
LE
TE
KIT
S
pre-assembled automation systemsfor counterweighted overhead,
spring-balanced or sectional overhead doors(transmission guide optional)
COMPLETE KITS
GARAGEDOORAUTOMATION
Item code Description Qty
V700 Gearmotor built-in control panel and courtesy light 1
AF43S Radio receiver 433.92 MHz 1
TOP-432SA Radio transmitters 433.92 MHz 1
TOP-A433N Radio antenna 433.92 MHz 1
All accessories for installation 1
price excl. VATU4310 Complete system for garage doors 367.00
(force of traction up to 850 N) For transmission guides see page 69. For full specification and operational limits see page 66.
kit U4310 includes
Item code Description Qty
V600 Gearmotor built-in control panel and courtesy light 1
V0678 Standard transmission arm 1
AF43S Radio receiver 433.92 MHz 1
TOP-432SA Radio transmitters 433.92 MHz 1
TOP-A433N Radio antenna 433.92 MHz 1
DOC-P Weatherproof push button 1
All accessories for installation 1
price excl. VATU4281-B Complete system for garage doors 259.00
(force of traction up to 500 N)
kit U4281-B includes
Item code Description Qty
V600 Gearmotor built-in control panel and courtesy light 1
AF43S Radio receiver 433.92 MHz 1
TOP-432SA Radio transmitters 433.92 MHz 1
TOP-A433N Radio antenna 433.92 MHz 1
DOC-P Weatherproof push button 1
All accessories for installation 1
price excl. VATU4281 Complete system for garage doors 214.00
(force of traction up to 500 N) For transmission guides see page 69. For full specification and operational limits see page 66.
kit U4281 includes
page 71 page 77page 76 page 78page 72
to 75
kit U4410GB includesItem code Description QtyV900E Gearmotor complete with control panel 1
with encoder and incorporated lamp
V0679 Chain guide L=3.52 m 1AF43S Plug in 433.92 MHz radio card 1TOP-432SA Multi-user radio transmitter, 433.92 MHz 1
All accessories for installation 1
price excl. VATU4410GB Complete automation for 229.00
overhead and sectional doorsFor full specification and operational limits see page 13.
GARAGEDOORAUTOMATION
For full specification and operational limits see page 66.
Certain items listed in the above kits, namely control board, remote controls or safety photocells, may be substituted without prior notice for a comparative alternative if the advertised item code is temporarily out of stock.
TRA04 radio systemItem code Description Qty
ZR24 230V Control panel with radio decoder 1
TOP-432SA 433.92 MHz multi-user, bi-channel transmitter 1
AF43S Plug-in 433.92 MHz radio card 1price excl. VAT
TRA04 433.92 MHz radio control system 127.00
universal-use complete systems
COMPLETE RADIO SYSTEMS
TRA03TRA05TRA04
TRA03TRA05TRA04
motorisedblinds
motorised curtains
motorisedrolling shutters
CO
MP
LE
TE
KIT
S
30
TRA03 radio systemItem code Description Qty
RE432 433.92 MHz radio receiver 1
TOP-432SA 433.92 MHz multi-user, bi-channel transmitter 2
TOP-A433N 433.92 MHz radio antenna 1
TOP-RG58 Cable for antenna connection 5 mprice excl. VAT
TRA03 433.92 MHz bi-channel radio set 125.00
TRA05 radio systemItem code Description Qty
RBE41 230V 4 channel external radio module 1
AF43S Plug-in 433.92 MHz radio card 1
TOP-434MA 4-channel multi-user transmitter 2
TOP-A433N 433.92 MHz radio antenna 1
TOP-RG58 Cable for antenna connection 5 mprice excl. VAT
TRA05 230V 4-channel radio set 193.00
motorisedblinds
externallighting
irrigationsystems
TRA04: 230V radio control system with 433.92 MHz radio device
TRA03 - TRA05: 433.92 MHz radio systems
residentialdivision
Pric
elis
t2005
residentialdivision
completeautomation kits
commercialdivision
car-parks and access
controldivision
UMC GROUP
residentialdivision
Automation for sliding gates:
automation for gates up to 200 kg page 34
automation for gates of up to 400/600/800 kg page 36
automation for gates up to 800 kg page 40
Automation for garage doors:
automation for overhead-type and sectional garage doors page 66
BZ Series >
BX Series >
BK 800 Series >
VER Series >
Automation for swing gates:
external automation with arm for gates up to 1.6 m per wing page 42
external automation for gates up to 3 m per wing page 44
external automation for gates up to 3 m per wing page 48
external automation for gates up to 3.5 m per wing page 50
external automation with arm for gates up to 2.3 m per wing page 54
external automation with arm for gates up to 3 m per wing page 58
FLEX Series >
ATI Series >
KRONO Series >
FROG Series >
control boards for 230V gearmotors page 62
Z230V Series >
FAST Series >
control boards for 24V gearmotors page 64
Z24V Series >
FERNI Series >
0115 9210430 0115 92104310115 9210430 0115 92104310115 9210430 0115 9210431Tel: Fax: CAME on orders to
the complete range
Safety accessories:
signalling flashing devices page 76
photoelectric detection cells page 77
sensitive safety edges page 78
Radio control accessories:
30.900 MHz quartz radio-controls page 74
433.92 MHz superheterodyne radio-controls page 72
Rolling Code 433.92 MHz radio-control page 73
Control accessories:
key-switches, induction loop control boards and cable page 70
personalised code keypads page 71
30.900 MHz (FM) multi-user radio-controls page 75
433.92 MHz (AM) multi-user radio-controls page 75
KIARO Series >
DIR/DOC Series >
D Series >
SET Series >
DIGITAL Series >
TOP QUARZATI Series >
TOP SUPERETERODINA Series >
ATOMO Series >
TFM Series >
TAM Series >
Automatic barriers:
for barriersplease seepage 106 in thecommercialdivision
240
290
130
105
18598
Type BZ BZ-1
Protection level IP54 IP54
Power supply 230V 50/60 Hz 230V 50/60 Hz
Motor power supply 24V D.C. 24V D.C.
Absorbed input 7A max 7A max
Max. tor
Recommended