View
5
Download
0
Category
Preview:
Citation preview
Profit Manufacturing Integral solutions to your manufacture needs
Profit Manufacturing is an Assembler located in San Pedro Sula, C.A.,
Honduras
Profit Manufacturing has been a leading supplier of design, precision
machining and manufacture of complete assembly and test equipment for
several industries, mostly specialized in the wire harness automotive and
aerospace industry in Mexico and Central America for the past 6 years.
Our Commitment with our customers goals in quality, service and price is
our mayor Business Card and our best background to complete in the
U.S. Market, since 100% of the final product of our customers goes for
sale to America.
Contact us:
Phone: (504) 556-9338 28 Street 2 & 3 Avenue
Fax: (504) 556-4226 Bo. La Guardia
profitman@sulanet.net San Pedro Sula, Honduras.
Page 3
0
Tab
le o
f con
tent
s
Profit Manufacturing Integral solutions to your manufacture needs
Assembly fixtures 4
Assembly board component 5
Electrical fixture 8
Electrical test board 9
How to order fixture 10
How to order clip 11
Table of contents
Single hand Insert/Release Connector Holder Increase your productivity. Reduce the time and
labor required to assemble and release the connectors inside the fixture
Features: • Fixture material: Acetal GP (Delrin ©). • Finger material: Aluminum. • Manufacturing Process: CAD design, CNC machining. • 100,000 cycles warranty. • Maintenance Free. • Very low wear of edges and shapes, avoiding loosening of connector inside the
holder. • Competitive cost against molded holders. • Poka yoke fixture design. • Rounded borders to avoid damage of the operator’s hand.
Minimum Order Qty available: 1 Price may vary in volume. We have a Database of over 700 connectors from major Brands (Tyco, Delphi, Packard, etc)
Profit Manufacturing Integral solutions for your manufacturing needs
Ass
embl
y fix
ture
s
Lower finger latch with wedge insert embedded. Mounted in 45° Standoff support(sold appart). Wedge Insert attached
Lower finger latch with wedge insert embedded. Mounted in 45° Standoff support (sold appart). Wedge Insert attached.
Upper finger latch with wedge insert embedded. Mounted in 90° Standoff support (sold appart). Wedge Insert attached.
One single source for all your wire harness assemble process.
We can provide you a single connector
holder to a whole production line, providing support from the first drawing to the first wire harness produced in our
assembly board.
How to order: Due to the high variety of connectors available in the market, each order is individually quoted. There are two ways to get the quote: 1. Take several pictures of the connector and provide them to your sales representative. Please don’t forget to provide a
picture with the terminals inserted. Fill the form provided in this brochure, page 10 2. Provide one connector to your sales representative and fill the form provided in this brochure, page 10. Important: All our fixtures are designed to fit in our standoff support . But, we can also design to fit your own support device.
Release Button
Page 4
Important: The following components are for MDF or Plywood boards only
Page 5
0
Wire Harness assembly Board
Boa
rd c
ompo
nent
s
Clip Assembly Fixture Features: • Fixture material: Acetal GP (Delrin ©). • Manufacturing Process: CAD design, CNC machining. • Maintenance Free. • Designed according to drawing orientation. • Competitive cost against molded fixture. • Poka yoke fixture design. • Foldable fixtures, to improve operation in tight spaces. • Can be mounted in one Fixed Post or in one Drop Slide Post. • Special configurations available.
Fixed Clip fixture Poka Yoke design
Foldable Clip fixture Poka Yoke design, assembly position (left), and folded position (right)
Standoff Support (Bracket)
Features: • Standoff support material: Aluminum body, steel anchor. • Oxidation & corrosion resistant. • Light weight. • Single hole mount. • Manufacturing Process: CAD design, CNC machining. • Maintenance Free. • 45°, 30° and 90° mount available. • Accurate dimension provided to the wire harness manufacture. • 5 Inches standard height. Other measures available upon request • Anti-twist device.
0° Standoff support, Part number 301FI003
45° Standoff support, Part number 301FI303
How to order: Select between angle, MDF width and working height :
0
0 0° Angle
3 45° Angle
2 30° Angle
I
G 4”
J 5 ½”
I 5”
H 4 ½”
K 6”
Angle
Working line height
301F 0
All our standard devices have been calculated for a fixed distance of 5 inches between the surface of the MDF board and the line where the wires are routed.
5 Inches working line height
1 1/2”
4 7/8”
3 3/4”
2 5/8”
5 1”
MDF or Plywood width 3
45°
How to order: Due to the high variety of connectors available in the market, each order is individually quoted. There are two ways to get the quote: 1. Take several pictures of the clip and provide them to your sales representative.
Fill the form provided in this brochure, page 11 2. Provide one clip to your sales representative and fill the form provided in this
brochure, page 11.
Profit Manufacturing Integral solutions to your manufacture needs
Several devices can be attached in this inside
threaded
Fixed post
How to order: Select between thread type, MDF width and working height :
External thread allows exchange of clip fixtures or special devices. Part
Number: 111DI003
Several devices can be attached in this inside threaded drop slide
post (left). Part Number:
522DI003
Magnetic hold in working upper position
Drop slide Post
Features: • Drop slide material: Steel. • Ideal for tight spaces. • Enables easier wire routing and taping. • Internal threaded drop slide post allows exchange of routing devices. • Standard height 5 Inches to working line. Other measures available upon
request. • Accurate dimension provided to the wire harness manufacture.
Up & Down movement
Drop Slide Post in down position
How to order: Select between thread type, MDF width and working height:
1 External 7/16”
2 Internal 1/4”
I
G 4”
J 5 ½”
I 5”
H 4 ½”
K 6”
Thread Working line height
1 00 1 1/2”
4 7/8”
3 3/4”
2 5/8”
5 1”
MDF or Plywood width 3 1E 1
1 External 7/16”
2 Internal 1/4”
I
G 4”
J 5 ½”
I 5”
H 4 ½”
K 6”
Thread Working line height
5 00 1 1/2”
4 7/8”
3 3/4”
2 5/8”
5 1”
MDF or Plywood width 3 2 2D
Features: • Fixed post material: Aluminum. • Internal threaded fixed post allows exchange of Routing devices. • Accurate dimension provided to the wire harness manufacture • Standard height 5 Inches to working line. Other measures available upon
request. • Fast mount on MDF boards. • Anti-twist device. • Standard outside diameter: 5/8”.
Boa
rd c
ompo
nent
s
Page 6
Page 7
0
Wire Harness assembly Board
Boa
rd C
ompo
nent
s
Wire Routing Devices
Features: • Material: Galvanized Steel. • Can be mounted in one Fixed Post or in one Drop Slide Post. • Special configurations available. • ¼ - 20 x 1” mounting bolt. Other measure available upon request • Up to five tips.
Routing Fork, 3 and 5 pins. Part number: 702BB050 (left),
702BI030 (Above) 4 Spring pin
7 Fork
I
B 1 ½”
E 3”
D 2 ½”
C 2”
F 3 ½”
Type
Pin height
0 0
1 1
4 4
3 3
2 2
5 5
Number of pins
3 7 2
How to order: Select between Type, Pin diameter, Pin height and Pins.
Single Pin router. Part Number:
702BC010 (Left)
Spring Pin indicator. Part Number
402BF010 (Right)
B
A 3/16”
B 1/4”
Pin diameter
0
Instead of the part number, provide a drawing with the clearance between pins. Example:
½” ¼”
¾”
Top View, 3 pin Fork
How to order: There are two ways to get the quote: 1. Send the drawings of your custom made part, or... 2. Send pictures of the wire harness or the component which you are need-
ing the part for.
Custom Made Design We can provide you special designs to improve your productivity.
Grommet expander tool.
“V” Block.
Foldable steel adapter.
Now you are ready to request your quote and place an order!!! For further information ask your sales representative or visit: www.Profitmanufacturing.com
Page 8
Features: • Fixture material: Acetal GP (Delrin ©). • Finger material: Aluminum. • Manufacturing Process: CAD design, CNC machining. • 100,000 cycles warranty. • Very low wear of edges and shapes, avoiding loosening of connector inside the
holder. • Competitive cost against molded holders. • Poka yoke fixture design. • Rounded borders to avoid damage of the operator’s hand. • Provided with Pogo Pins in .040”, .054”, .080” , .090” or .125” diameter
mounted with or without receptacle. Threaded pogo pins available upon request also.
• Clamping device in the following options: • Pneumatic. • Electric (solenoid).
• 2 feet connecting wire lead, 20 AWG. • Vacuum, color detection and other special test available upon request.
Minimum Order Qty. available: 1 Price may vary in volume.
Profit Manufacturing Integral solutions to your manufacture needs
Ele
ctri
cal f
ixtu
res
Side finger latch. This model of fixture, mounted on standoff support, is commonly used in combined assembly and electrical test board.
Test loose terminals (without connector).
Electrical Test Boards From a single electrical module, or one electrical fixture mounted in standoff
support, to a complete wire harness test work station, fully wired and ready to
work.
Electrical test assembly fixture
Module style. This model is used in modular board test (See picture at the top). Mostly common used in wire harness assemble systems where there is a dimensional verify work station before or after the electrical test board.
Clip presence detect fixture, with Poka Yoke design and pin switch embedded.
Wire Harness Test Board 0
Ele
ctri
cal b
oard
Engineering support to reduce cost in electrical test equipment. One of the biggest concerns of any wire harness manufacturer is the very high cost of the test boards, electrical fixtures and test equipment like analyzers. Aware of this situation, Profit Manufacturing has been developing and testing several devices that can be able to make the test effectively but at the same time keep an affordable price and a very low maintenance cost. In order to reach this objective, Profit Manufacturing has signed training contracts and distribution arrangements with leader companies worldwide in key products that are actually applied to many equipment in the wire harness industry. Some of these enter-prises are SMC©, worldwide leader in pneumatic devices, and Maytec©, manufacturer of extruded aluminum, among others. Besides, Profit Manufacturing have strong relations with some Educational Centers, like the Masters degree in Electronic Engineering from the Technological Institute of Chihuahua, and with the Advanced Manufacture Systems, Master degree also in the same Institute. Profit Manufacturing is strongly committed to offer to all our clients the best in tool-ing for the wire harness manufacture, one of the most competitive manufacturing envi-ronment in the world.
Full Electrified test board: You can choose between four kinds of electrical test board: 1. Assemble & Electrical Board.– Low volume production. 2. Electrical Board only.– Medium to high volume production. Dimensions are
verified apart. 3. Dimensional board with clip presence detection only.– Medium to high vol-
ume production. Used as a complement of the Electrical Board. 4. Electrical & Dimensional Board (Fit to assemble) .– Medium to high volume,
less labor in process.
Page 9
How to order: Due to the high variety of connectors and clips available in the market, each order is individually quoted. There are two ways to get the quote: 1. Take several pictures of the connector or clip and provide them to your sales
representative. Please don’t forget to provide a picture with the terminals in-serted. Fill the form provided in this brochure, page 10, for fixture, or page 11 for clip.
2. Provide one connector or clip to your sales representative and fill the form pro-vided in this brochure, page 10, for fixture, or page 11 for clip.
Connector’s manufacturer User part number
Manufacturer part number Requested by:
Picture or drawing, perspective view
Long:
Height:
Millimeters Inches
Millimeters Inches
Width: Millimeters Inches
Assemble fixture
Internal Island
Wedge insert device
Terminal Blocking pin
Electrical fixture
Internal island
Wedge detection
Clip detection
Quantity:_______
Quantity:_______
Seal detection Quantity:_______
TPA detection Quantity:_______
Pogo Pins
Without receptacle, wire welded to pogo pin
Quantity:_______
With receptacle Quantity:_______
Threaded type Quantity:_______
Lead wire Long (ft):_______
Clamp
Mechanic (finger release)
Electric (12 volt solenoid)
Pneumatic (cylinder)
Mounted in Standoff support, PM model
Without receptacle, with terminal in the pogo pin
Quantity:_______
Mounted in Standoff support, customer model
Mounted in Standoff support, PM model
Mounted in Standoff support, customer model
Mounted in MDF square, 120 x 120 mm (module type)
Picture or drawing, side view
Picture or drawing, front view
Vacuum test
Positive air pressure test
Color detection
Other:
Profit Manufacturing Integral solutions to your manufacture needs
Please fill the following format to quote fixture for connector
How
to o
rder
Mounting angle: 0° 30° 45°
Page 10
Página 11
0
How to order
How
to o
rder
Clip’s manufacturer User part number
Manufacturer part number Requested by:
Picture or drawing, perspective view
Long:
Height:
Millimeters Inches
Millimeters Inches
Width: Millimeters Inches
Assemble fixture
Electrical fixture
Lead wire Long (ft):_______
Mounted in Standoff support, PM model
Mounted in fixed post, PM model
Mounted in drop slide post, PM model
Mounted in MDF square, 120 x 120 mm (module type)
Other:
Please fill the following format to quote fixture for clip
Select orientation and shape. Pease define the cut view reference in the drawing:
MDF surface
Wire harness Clip
View___________________________
Some steps are listed before you have one assembly board (or production line with dupli-cated boards) to start the manufacture of your wire harness. Profit Manufacturing can help you to accomplish them.
Profit manufacturing Support ♦ Evaluation of drawings to determine the components required in the assembly board to fulfill the quality
specs. We can help you to evaluate the best production method and work stations required to accomplish the production rate.
Customer Step Receive drawing of the wire harness from your customer, with dimensional specs, components and definition of orientation
Profit manufacturing Support ♦ Design of the master assembly board. This board will help to determine and improve the manufacture
method, and will be the pattern for the rest of the duplicated assembly boards as well. ♦ For the approval of the master board and the components mounted in it, there are two ways:
1. Video conference, where you can evaluate all components, see the manufacture of wire harness in the assembly board with one of our highly skilled operators and learn the method.
2. Send one people of your own to evaluate the board on site. Important note: Raw material for the assemble of the wire harness must be provided by your com-pany.
♦ Manufacture of wire harness samples. We only assemble the components, but in some cases we can crimp, weld and cut the wires.
Customer Step Manufacture of master assembly board to build prototype samples of the wire harness
Profit manufacturing Support ♦ Duplication of wire master assembly board. We can ship the boards to your site fully assembled or “Ready
to assemble”, with predrilled holes.
Customer Step Manufacture of work stations to produce the wire harness
Profit manufacturing Support ♦ Design and manufacturing of electrical fixtures or test boards.
Customer Step Get the appropriate equipment to test the wire harness functionality, electrical and dimensional.
Customer Step Production start.
Technical Support Profit Manufacturing
Integral solutions to your manufacture needs
Recommended