View
61
Download
0
Category
Preview:
DESCRIPTION
CO Alarm Mandates in Model Codes as Public Policy Presented at ICC Code Technology Committee on CO Alarms Ted A. Williams, Director, Codes, Standards & Technical Support American Gas Association Washington, DC* July 25-26, 2005 Schiller Park, IL - PowerPoint PPT Presentation
Citation preview
1
CO Alarm Mandates in Model Codes as Public Policy
Presented at ICC Code Technology Committee on CO Alarms
Ted A. Williams,Director, Codes, Standards & Technical Support
American Gas AssociationWashington, DC*
July 25-26, 2005Schiller Park, IL
*With technical contributions from Dr. Irwin Billick, WEC Consulting
2
Issue Before ICC:
Is the mandating of CO alarms in residential buildings through model codes or other mechanisms an effective mechanism for reducing the incidence of CO poisoning death or serious injury?
3
AGA’s Interest in the Issue
• Consumer Safety• Customer Satisfaction• Long History of CO Response and Understanding of
Appliances as Sources• Estimated Gas Utility Response Cost of $78-$90 Million
Annually for CO Alarm Response, Based on Early CO Alarm Performance and Protocols in Place at the Time*
• Gas Industry Response: Published studies on laboratory alarm performance (four of them), field data gathering from first responders and gas utilities, analyses of mortality and morbidity data, and policy analyses (e.g., benefit/cost analysis and consumer response analysis).
*Cost-Effectiveness Analysis – Residential Carbon Monoxide Detectors: Final Report,” Science Applications International Corporation, GRI-96/0054, August, 1996.
4
Some Current Views of the Federal Government on CO Alarms and Mandates
“CPSC will eventually go back to that [making proposals to model codes for CO alarm requirements], but we are concerned about the long term durability of CO alarms.” Don Switzer, Directorate of Engineering Sciences, CPSC, responded to questions at the UL Gas Products Council Meeting, Itasca, IL, May 3, 2005
“CPSC would not support mandatory requirements for CO alarms while long term reliability is still at issue.” Richard Stern, Compliance Division, CPSC, responding to questions at the ASHRAE 62.2 Indoor Air Quality Subcommittee Meeting, Orlando, FL, February 4, 2005.
“Carbon Monoxide Detectors are widely available in stores and you may want to consider buying one as a back-up --BUT NOT AS A REPLACEMENT for proper use and maintenance of your fuel-burning appliances. However, it is important for you to know that the technology of CO detectors is still developing, that there are several types on the market, and that they are not generally considered to be as reliable as the smoke detectors found in homes today. Some CO detectors have been laboratory-tested, and their performance varied. Some performed well, others failed to alarm even at very high CO levels, and still others alarmed even at very low levels that don’t pose any immediate health risk. And unlike a smoke detector, where you can easily confirm the cause of the alarm, CO is invisible and odorless, so it’s harder to tell if an alarm is false or a real emergency.” U. S. EPA Fact Sheet, “Protect Your Family and Yourself from Carbon Monoxide Poisoning,” http://www.epa.gov/pubs.coftsht.html.
5
Non-Federal Mandates, Passed or Considered
•States •Enacted
•Alaska; New Jersey; New York; Rhode Island;Utah (bldg. code provision); West Virginia; Texas (day care centers and group homes)
•Rejected•Maryland
•Pending•Massachusetts
6
•Local GovernmentsMuscle Shoals, AL
Anchorage, AK
Wilmington, DE
Illinois: Chicago, Frankfort, Gurnee, Lake Forest, Lincolnwood
Linn County, IA
Massachusetts: Abington, Marshfield, and Mashpee,
Pontiac, MI
St. Louis, MO
New York State: Albany, Greenburgh, Kingston,
New York City and Rockland and Suffolk
Mecklenburg County, NC
NJ: Fort Lee and the Village of South Orange
Ohio: Brooklyn, Eastlake, Lakewood, Macedonia,
Maple Heights, Northfield,Parma, Richmond Heights,
Westfield Center, and Willowick.
Bellaire, TX
Brown Deer, WI
7
No contemporary formal or documented analyses has been identified that evaluates the effectiveness of mandating CO alarms in terms of potential number of lives saved or serious adverse health impacts avoided and direct or indirect costs to the public affected.
8
Elements to Consider in Evaluating the Potential Effectiveness of CO Alarms
•Size of the Problem•Mortality •Morbidity
•Housing Population Covered•Compliance•Alarm Reliability•Response to Alarm
•By Individuals•By Municipal Services•By Utilities
9
Size of the Problem
Mortality Analysis Data•Alarm Manufacturers and Advocates•National Center for Health Statistics•Consumer Product Safety Commission
Mortality is a function of:•Time•Season•Location •Geography•Demographics•Source of CO
10
•How many unintentional, non-fire CO deaths arethere per year that would be covered under the terms of the proposed mandate?
•Is this number stable, or is it changing with time?
•If changing with time, what is the estimated future number of deaths?
11
Num
ber
Of
Dea
ths/
Yea
r
TOTALCO
Unintentional Non-Fire Related Carbon Monoxide Deaths
(NCHS, 1943-1998)
0
200
400
600
800
1000
1200
1400
1600
1800
2000
1940 1950 1960 1970 1980 1990 2000
Year
Pipeline
Motor Ve
Other
12
Location of Unintentional CO Fatality All Sources 1979-96
REC CTR2%
STREET5%
PUB BLDG3%
INSTITUTION0%
INDUSTRIAL8% FARM
1%
MINE0%
OTHER12%
NOT SPEC15%
HOME54%
Total Cases14579
13
Unintentional Non-Fire CO Fatalities in the Home 1979-2019(NCHS Morbity Data 1979-98)
0
100
200
300
400
500
600
700
800
1975 1980 1985 1990 1995 2000 2005 2010 2015 2020
Year
CO
Dea
ths
pe
r Y
ea
r
Other Sources Obs Motor Vehicle Total
Other Sources Pred Motor Vehicles Pred Total Pred
14
The number of CO deaths in the home from automobiles and most consumer products sources has been steadily decreasing for over fifty years and is expected to continue to decrease at the same rate for the foreseeable future with one major exception: portable generators, for which incidents are increasing.
15
Unintentional Non-Fire CO Fatalities in the Home Associated with Consumer Products 1990-2019
( CPSC Data 1990-2001)
0
50
100
150
200
250
1985 1990 1995 2000 2005 2010 2015 2020
Year
CO
Dea
ths Home,Obs Home, Pred.
16
CO Deaths Associated with Engine-Driven Tools (CPSC Data 1990-2003)
0
5
10
15
20
25
30
35
40
45
1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003
Year
Nu
mb
er
of
De
ath
s
Generators
All Other Engine -Driven Tools
17
The rate of CO deaths per million homes is decreasing about 5% per year. By the year 2005 there will be two deaths per million homes and by 2019, this is projected to drop to one death per million homes.
If two million houses were built in 2005 and one CO alarm was placed in each house, the maximum number of CO deaths that could be prevented would be 4. If the average cost of an alarm is $10 per year, the cost per life saved would be $5 million. The cost per life saved would rise to $10 million by 2019 due to decreasing incidents.
18
Unintentional Non-Fire CO Fatalities per Million Homes (NCHS Data ,1979-2019)
0.00
1.00
2.00
3.00
4.00
5.00
6.00
7.00
8.00
9.00
1975 1980 1985 1990 1995 2000 2005 2010 2015 2020
Year
Dea
trh
s p
er M
illio
n H
om
es
Deaths/Milliion Homes Obs
Deaths/Million Homes Pred.
19
CO incidences that lead to carbon monoxide fatalities or serious injuries are random and highly case dependent. In order to be effective, carbon monoxide alarms must be in all homes and must be 100% reliable, and consumers must respond appropriately.
Limiting the housing population covered by a mandatory code requirement will reduce prevention effectiveness.
Some of these limitations on coverage include:•Housing stock covered (e.g., new vs. existing houses)•Type of garages•Types of installed appliances vs. portable appliances •Types of fuels used.
•
20
Examples of Mandate Limitations
•Albany NY Every building of residential or mixed occupancy, relying on combustion of fossil fuel for heat, ventilation or hot water or sufficiently close to any ventilated source of carbon monoxide to receive carbon monoxide from that source, and having more than one residential unit must have carbon monoxide detectors installed. [Missing: All electric homes with attached garages.]
Chicago, IL. Dwellings that do not rely on combustion of fossil fuel for heat, ventilation or hot water, and are not sufficiently close to any ventilated source of CO, and units heated by steam, hot water or electric heat and not connected by ductwork or ventilation shafts to any room containing a fossil fuel-burning boiler or heater and not sufficiently close to any ventilated source of CO, are exempted. [Missing: All electric homes with attached garages.]
Maryland State (As Proposed) Any new residential unit for which an initial building permit is issued on or after October 1, 2000, for a residence to be constructed with a gas heating system, fuel burning appliances, or an attached garage. [Missing: Existing homes.]
21
Dwelling Units Without Fossil Fuel Appliances
Dwelling Units With Garage
Dwelling Units Without Garage
Dwelling Units With Fossil Fuel Appliances
New HomesExisting Homes
22
Enforcement Complexity May Inhibit Alarm Effectiveness.
Initial Compliance. New York City example:
Building owners' responsibilities
•Provide and install at least one approved carbon monoxide alarm each dwelling unit. •File a "Certificate of Satisfactory Installation in the borough in which the dwelling is located. •Post a notice in a form approved by HPD in a common area inform occupants of Local Law # 7 requirements. •Provide a notice in a form approved by HPD informing occupants•Provide written information regarding the testing and maintenance carbon monoxide alarms, including general information concerning carbon monoxide poisoning and what to do if a carbon monoxide alarm activates to at least one adult occupant of each dwelling unit. •Keep all records relating to the installation and maintenance of carbon monoxide alarms and make them available upon request to the Department of Housing Preservation and Development (HPD), the Department of Buildings (DOB), the Fire Department and the Department of Health and Mental Hygiene (DOHMH). Keep and maintain the carbon monoxide alarms or systems in good
23
Non-Compliance With Code Will Reduce Effectiveness
*RESIDENTIAL CARBON MONOXIDE ALARM POPULATION: SIX CITIES STUDY
J. Kramer and S. Tikalsky GRI-00/0144 August 2000
40%
75%60%
50%
50%
25%
0%
20%
40%
60%
80%
100%
Albany Chicago Toronto
Mar
ket P
enet
ratio
n
Alarm No Alarm
Ordinance Cities
Market Penetration of CO Alarms in Cities with Legal Mandate July 1999*
Effective Date of Ordinance Nov 98Oct 94Jan 97
24
Consumer Response to CO Alarm *
No Call63%
Utility10%
Fire Department14%
Contractor2%
Friend/Familyily5%
Other6%
Failure of Consumer to Respond Appropriately to an Alarm Will Reduce
Effectiveness
*RESIDENTIAL CARBON MONOXIDE ALARM POPULATION: SIX CITIES STUDY
J. Kramer and S. Tikalsky GRI-00/0144 August 2000
25
Alarm Performance Deficiencies Will Reduce Effectiveness
•Studies on CO alarms showed unacceptable performance.
•Gas Industry: ETL, GARD Analytics, Mosaic Industries•Consumer Product Safety Commission
•There is inadequate data about the long term CO alarm reliability.
•False positives (“false alarms”) negatively influence installation/replacement and consumer response to activations.
26
-416
A1 A2 A3 A4
Month 0 Month 3 Month 6 Month 9 Month 12
Nu
mb
er o
f F
ailu
res
Nu
mb
er o
f F
ailu
res
Brand Brand
Total Number of Failures
0
2
4
6
8
10
12
14
16
A1 A2 A3 A4
No Alarm
0
2
4
6
8
10
12
14
16
A1 A2 A3 A4
Fail Low
0
2
4
6
8
10
12
14
16
A1 A2 A3 A4
Fail High
0
2
4
6
8
10
12
14
16
A1 A2 A3 A4
GARD Analytics: Alarm Failure by Brand and Failure Mode at 100 ppm.*
*CHAMBER TESTS OF RESIDENTIAL CO ALARMS, R. L. Hedrick, GRI-97/0082.3 April 1998
27
Mosiac Industries: Overall Findings*
• 109 CO alarms tested: 81 commercial alarms of 10 brands manufactured from 1997 to 1999 and 28 alarms under development at the time
• 3 of 10 commercial brands alarmed within all UL 2034 performance specifications but with 15% supervised failures
• 6 brands failed one or more UL performance specifications: 8% of alarms false alarmed, 79% failed to alarm at 5% RH, 47% failed to alarm at 50% RH; 30% alarmed in response to interference gases.
• 4 brands showed poor digital display accuracy (>+/-30% of actual concentration)
• Half of brands showed decreasing sensitivity with rising CO concentrations (tested at 50 ppm/hour rise), failing to alarm at 10% COHb.
*“Evaluating the Performance of Residential CO Alarms: Final Report,” Mosaic Industries, GRI-02/0112, June, 2002.
28
CPSC “Dynamic Testing”
• CPSC Findings*– 12 of 40 CO alarms tested failed to alarm at the UL 2034
Standard limit of 10% COHb when presented with CO concentrations rising at 50 ppm/hour used in Mosaic tests.
– Safety margin within UL 2034 would have prevented acute poisoning in all but one alarm test
– Poor accuracy of digital displays.
• Alternative Interpretations– 50 ppm/hour rise time is far too slow to account for
catastrophic CO events (e.g., vitiated combustion, portable generator emission factors, etc.). Faster, more realistic rise times would show far worse results.
– 10% COHb is the only reasonable basis for life safety protection afforded by alarms and has been maintained by CPSC as the appropriate limit for protection of the public. It should be a basis for acceptable performance.
*”Status Report on Carbon Monoxide Alarm Testing,” U. S. Consumer Product Safety Commission Staff Paper, June 2004.
29
Fire Responder Data on CO Alarms(NFIRS 4.5-5.1 1999-2002)
• From U. S. Fire Administration, Department of Homeland Security – National Fire Incident Reporting System (NFIRS)
• 64,204 CO incident calls• 13.4% of “CO Incidents” where a CO alarm was present
and performance reported, the CO alarm “did not alert occupants” – false negatives/failure to warn
• 94.2% of incidents where a CO alarm activation was reported, “no carbon monoxide detected” or “CO detector malfunction” – false positives or “false alarms.”
From: “Preliminary Analysis of Fire Department Reported Carbon Monoxide Incidents 1999-2002,” WEC Consulting, January, 2005.
30
NEWS from CPSCU.S. Consumer Product Safety Commission
February 2004
CPSC, GE Security, Inc. Announce Recall of Carbon Monoxide Alarms WASHINGTON, D.C. - The following product safety recall was conducted voluntarily by the firm in cooperation with the CPSC. Consumers should stop using the product immediately unless otherwise instructed.
Name of product: Carbon Monoxide (CO) Alarms
Units: About 74,000
Manufacturer: GE Security, Inc., (GE Security) of Tualatin, Ore.
Hazard: The recalled units fail to detect carbon monoxide after 1 year of operation due to an internal software error. These CO alarms do not provide an "end of life" signal or other indication of inoperability, even if the test button is depressed.
Incidents/Injuries: GE Security has received one report that the CO detector did not operate properly in the presence of CO. No injuries have been reported.
Description: These ESL SafeAir 240-COE Carbon Monoxide alarms are hard-wired and require professional installation. The white, rectangular units are about 6-inches long and 2.75-inches high. "CARBON MONOXIDE ALARM" and "DO NOT PAINT" are written on the front of the units. "240-Coe, "SENTROL," (a former name of the company) and the date code are written on the back. The date code is a four-digit number ending with a "T." The four digits denote the week and year of manufacture. For example, the date code "4500T" refers to a unit that was manufactured in the 45th week of 2000. Only units with date codes 4500T (November 2000) through 3502T (August 2002) are included in the recall..
Sold at: Distributors, dealers and installers of security systems nationwide from November 2000 through October 2003 for about $49.
Manufactured in: China
Remedy: Consumers should contact their system installer or service provider to arrange for the free installation of a replacement CO alarm.
Consumer Contact: Call GE Security, Inc. at (800) 648-7422 between 6 a.m. and 5 p.m. PT Monday through Friday, or go to their Web site at www.ge-interlogix.com.
31
Impending Proposals for UL 2034 Standard Changes
• Three task groups formed June 2004 to develop product standard changes:– Lifetime requirements for CO alarms– Accuracy requirements for digital displays– Performance testing based on “dynamic tests” used by
Mosaic and CPSC
• Proposals for changes expected Summer of 2005• These proposals, whether adopted individually or
collectively, will have major changes for manufacture and design certification of CO alarms
• Tomorrow’s CO alarms will not be like many of the alarms produced today.
32
Summary
•Most, if not all, mandate implementation activities have not carried out any technical analysis on expected effectiveness or cost.
•A number of factors impact mandate effectiveness, including breadth of housing stock covered, performance of alarms, compliance to mandates, and consumer response to activations.
•Only non-fire, unintentional deaths (~ 625 in 1979 decreasing to ~ 325 in 1996) could be avoided by a CO alarm mandate.
•Requiring an alarm in all housing would provide the only potentially efficient means of reducing fatalities.
•The number of deaths/dwelling unit has been dropping by about 5% per year.
•Laboratory and field data continue to demonstrate relatively poor performance of CO alarms across the range of listed products.
33
Summary (continued)
•Potential changes in UL 2034 raises questions about current stability of design certification of CO alarms and appropriateness of mandates using current and past editions.
•For an idealized national mandate (one alarm per household, 100% compliance, performance to design certification, appropriate consumer response), about two CO deaths/million homes could be avoided.
•Under these idealized assumptions, the cost to taxpayers of $5-10 million/life saved from the idealized mandate is above the Federal Government life value of $2-6 million/life saved.
•The cost effectiveness of the mandate most certainly is decreased (cost/life saved increased) by realistic factors including:
•Limitations on housing stock (I.e., incident base) covered•Incomplete compliance with the mandate•Performance and reliability issues of alarms, including added costs•Inappropriate consumer action in response to an alarm
34
ICC Has It Right for CO and Appliances: Source Control Based on Enforceable Code
Provisions
“Sound regulatory practice requires code enforcement agencies to ensure that heating appliance installation and maintenance takes place in accordance with code requirements. The IFGC & IMC cover the entire range of such installations”
Recommended