View
3
Download
0
Category
Preview:
Citation preview
1
Con
nect
ors
Important Information
Intellectual property
Titus Group owns the intellectual property rights in its products worldwide whether as trademarks, patents, intellectual, copyright, designs, illustrations, drawings and the ‘know how’ contained in their design and production. Titus Group respects the equivalent rights in competitors and all other relevant product design rights in others. To our knowledge our products do not infringe any intellectual property rights of competitors or other parties. Titus Group takes infringements of its rights seriously and will rigorously defend these rights to the full extent of the law.
Responsibility
It is the responsibility of the user to ensure the fi tness of hardware for the intended purpose. We recommend assessment by appropriate testing in the application and by technical enquiry to our representatives.
Technical information
While every effort has been made in the production of this catalogue to ensure the accuracy of information, our products are continually being revised and users should confi rm the up to date specifi cation before ordering.
*Non preferred articles
All Item numbers in the catalogue marked with * are for non preferred non stock items available upon special request. For such products, extended delivery times may apply.
Trademarks
Titus and Titusonic are registered trademarks of Titus International Ltd. Lama is a registered trademark of Titus d.o.o. Dekani, WoodWelding is a registered trademark of WW SA.
2
6
2
9
10
12
16
ConnectorsProduct Guide
Fittings for rigid assembly systems
System 1Page
a highly cost-efective and
rigid assembly system for
factory, consumer and home
assembly
Fittings for face-boring applications
System 2
face boring applications that
provide a tolerant effi cient
assembly
Fittings for face and edge boring
System 3
two component rigid face and
edge drilling fastening
Fittings for face-boring only
System 4
a range of low-cost one-piece
fi ttings for high volume home
assembly applications
Cams and dowels
System 5
a comprehensive range of
cam and dowel connecting
fi ttings for all cabinet
applications
3
Con
nect
ors
3
30
37
Quickfi t-Expando Connectors
System 6
face boring expanding
connectors for all cabinet
applications.
Page
Heavy duty cams and dowels
System 7
High quality fi ttings for offi ces
and public furniture.
4
Why Choose Titus?
Titus connectors improve the quality
of furniture and lower the cost of
manufacturing and assembly
while ensuring a high degree of
customer satisfaction.
Precise and effi cient product design.
The broadest possible range of drilling tolerances ensures reliable
assembly and consistently strong joints.
Klix locking feature, the engagement
of interlocking teeth on cam and
dowel, to prevent joint
loosening in service or transit.
Expanding function provides degrees
of variation in out-of-tolerance drillings
ensuring stronger joints and improved
quality of furniture.
Twinstart thread for faster and more
stable insertion.
Depth stop collar prevents over-
insertion.
Firm tightening for greater confi dence
in use.
Cam locks at 230° assuring smooth
tightening action and greater dowel
pull-up.
Quickfi t for hand dowel insertion.
Quickfi t TL2, TL4 with the built-in self
adjustment feature is the only available
dowel that allows for pre-insertion.
Quickloc one piece fi tting for faster
assembly with integrated expanding
cam and dowel.
Zinc+steel dowel for optimal strength
and performance.
Precise dowel manufacturing
high precision of zinc and strength
of steel assures 100% dimensional
accuracy.
ConnectorsInformation
Titus connectors add value to furniture and to furniture manufacturing
The most advancedrange of connectorsavailable on the market
Easy and quick consumer friendly self-assembly of furniture
Self-assembly furniture offers
consumers good value and instant
availability of products.
With the aim of providing consumer
with simpler instructions, fewer parts
and an easier assembly process, Titus
has signifi cantly reduced and simplifi ed
the number of fi ttings traditionally
required in furniture production.
Titus connectors provide consumers
with easy assembly and furniture
producers with increased productivity:
- reduced number of assembly parts
- easy assembly instructions
- security of packed parts during transit
5
Con
nect
ors
T A N CAF
4 38 3 126
6 21 4 108
6 15 4 84
6 7 4 52
2 3 2 10
2 3 1 5
1 0 1 1
Easy and Quick Furniture Assembly
ConnectorsInformation
CAF formula
How does it work?
Connecting screw (traditional assembly)
Cam & Single start dowel
Cam & Twinstart dowel
Cam & TL2 dowel (self-assembly)
Cam & TL2 dowel (factory pre-inserted)
Quickloc
Fully assembled demonstrator
Comparative CAF scores
to assemble a hand held
demonstrator
CAF=Consumer Assembly Friendliness
Titus CAF formula provides a
comparative measure for customer
satisfaction. By using it manufacturers
are able to evaluate their products
internally or against those of their
competitors. While offering
consumers easier and
faster assembly, there are obvious
advantages also for furniture
manufacturers – buying, counting,
bagging and stocking of fi ttings can
be greatly reduced.
6
System Features
The Hi-Lo™ carcase construction
screw (CCS) offers a strong, tolerant
and cost effective connection with
minimal panel preparation.
The combination effect of the elements
of a Hi-Lo™ screw means
· A greater differential between drive
torque and strip torque in fi brous and
particle materials to ensure a reliable
and repeatable fi xing
· Hi-Lo™ threads provide minimum
bursting forces
· ‘Hi’ thread gives low bursting
component force from the sharp 30
degree angle thread
· ‘Lo’ thread at 60 degree angle uses
the vertical force component to press
fi brous and particle components of
panels onto the ‘Hi’ thread and are
contained by their greater height
· The very small shank on a
Hi-Lo™ screw means less material
displacement than conventional
threads and enables minimum
or partial drilling of pilot holes for
speedier panel processing
Hi-Lo™ carcase construction screw
System 1Fittings for Rigid Assembly Systems
· Used with Titus Hi-Lo™ screws
· Titus barrel nuts provide maximum
strip torque for reasonable drive
torque
· Capable of multiple reconnection
repeatability
Barrel nut (plastic)
· Available in multiple colours
· All recess and head types offered
· High quality engineering polymers
used in their construction
· Uniformity of holding with good
tolerance
· Wide range of application and use
conditions
Cover caps
· Zinc diecast for precision
· Titus Double locking carcase screw
makes an almost invisible connection
· Collar under the head to pull panels
together
· 2nd ‘lower’ thread pulls against a
‘faster’ thread to provide maximum
connection force and prevents
overdriving of fastener
· Almost invisible in position
· Head can be ‘fastcapped’ or fi lled
Double locking carcase screw
7
Con
nect
ors
42
00180 > 885
min 30
Ø7/7.5
15/16Ø5
Item number Zin
c
1000 Pcs
System 1Fittings for Rigid Assembly SystemsDouble Locking Carcase
Screw
Screw6x42
Made of zinc
· High performance from widely spaced primary
thread
· Finer secondary thread provides additional
holding power and positive stop (no override)
· Increased support for vertical panel is gained
from the funnel head with collar at its base
· One-piece fitting
1. Insert screw to shoulder in
face board
2. Screw into Ø5mm hole
3. Board joint pulled up by
collar on screw
4. Board locked in place by
screw
Technical andmounting details
8
00062 >
00068 >
00071 >
06074 >
00077 >
00172 >
06077 >
06080 >
25
28
33
38
45
55
50
50
01020 >
01042 >
852
852
852
852
852
852
852
852
877
877
01056 >
L
Ø7.6
L
835
Ø3
9 min
Ø5
Ø12x11
B
7.5/8
877
4
4
4
4
4
4
4
5
835
20
23
28
33
40
50
45
45
A1
Item number Bla
ck
Pho
spha
te
Barrel nut
10000 Pcs Made of plastic
Whi
te
Tota
l Len
gth
50000 Pcs
System 1Fittings for Rigid Assembly SystemsHi-Lo™ Screw
and Barrel Nut
Hi-Lo™ screw
Made of steel
Made of plastic
Screw cap
· Hi-Lo™ screws have a twin thread for faster insertion
· ‘Hi’ threads and ‘Lo’ threads combine to give excellent
pull out in chipboard
· Funnel head design means no countersinking
· Steel is case hardened for extra strength
Technical andmounting details S
crew
dia
met
er
Other colours on request
Other colours on request
pozi, philips
hexagon
3000 Pcs (00172, 06077, 06080)
4000 Pcs (00077, 06074)
7000 Pcs (00071)
9000 Pcs (00068)
10000 Pcs (00062)
9
Con
nect
ors
02077 > 877
10
10
17
Ø4.5
32
17
Item number Dar
k b
row
n
Lig
ht b
row
n
Ivo
ry
Whi
te
System 2Fittings for Face-Boring Applications · Range of fixing blocks for multiple applications
· Face drilling only required
· Durable plastic material is flexible providing
greater holding power
· Choose screw fastening or hammer insertion
2000 Pcs Made of plastic
Technical andmounting details
10
System Features
Titus System 3 is a two component
rigid face and edge drilled fastening
with half turn to fasten. System 3 offers
almost full concealment and wide
tolerances in use.
· Automatic or in-factory placement
· Pre-location pin ensures ease of
assembly
· Less than one turn of a screwdriver
to fasten
· Shelf edge installation of pin means
maximum shelf cut size tolerance
· Can be used on 12mm shelf panels
· No loose parts for maximum
convenience in RTA
· Drawer front fi xing, cabinet
construction
System 3Fittings for Face and Edge Boring
11
Con
nect
ors
03118 >
03121 >
03181 >
03090 >
831
831
03165 > 883
D2D
12.5
11
35
25 883
03150 > 831
881
877
C
3.75
3
Item number Dar
k b
row
n
Zin
c p
late
d
Screw dowel Ø5
Dri
lling
dia
met
er
for
do
wel
thr
ead
2500 Pcs
System 3Fittings for Face and Edge BoringConcealed Housing
Housingassembly
Made of plastic or zinc, plastic
Screw dowel Ø3
· One turn locking system reduces assembly time,
both in the factory and home
· Pre-assembly feature for consumer convenience
· Choice of dowels to suit drilling
· Hi-Lo screw feature for faster insertion
1000 Pcs Made of steel
X, Y - depends on board thickness
15000 Pcs
Cover cap
Yello
wp
assi
vate
Whi
te
Other colours on request
Made of plastic
Dri
lling
dep
th
Dri
lling
leng
th
for
do
wel
X, Y - depends on board thickness
X, Y - depends on board thickness
Technical andmounting details
Made of steel1000 Pcs (03090)
4000 Pcs (03181)
X-Y
+7
Ø25 x D
(Y=
9.5
MA
X)
YX
(Y=
9.5
MA
X)
Ø5 x 30
X-Y
+7 Y
X
(Y=
9.5
MA
X)
ØD2 x C
X-Y
+7 Y
X
12
System Features
Cost effective one piece fi ttings with
face boring benefi ts
· Flush and block components
· Face-boring only
· Good tolerances
· One piece connectors
· Angledriv versions fastening with
maximum driving power and fl exibility
· Quickloc™ versions need only one
turn to tighten for fast assembly
· Foolproof consumer home insertion
System 4Fittings for Face-Boring Only
Quickloc™
Quickloc™ Assembly
The integrated housing and dowel
make Quickloc™ the most user-friendly
and tolerant product available.
· High degree of drilling tolerance
· Push-in design
· Tool-free insertion
· Integrated expanding housing and
dowel provide consistently stronger
joints
· ‘Klix’ locking system
3. Tighten in less than one turn
1. Press Quickloc into the face board 2. Assemble the panels
13
Con
nect
ors
835
06802 >
831
835 831 871
9.5 Ø8
06803 >
9.5
4.510
Ø20
Ø8
10
Ø1010.5 A1 115
12
Ø25
13
Ø10
Dar
k b
row
n
Tan
System 4Quickloc™One Piece Expanding
Connector
Quickloc Ø20 flanged
Item number Bla
ck
· An innovative, one-piece connector, capable of hand insertion
· Is highly tolerant and tightens in less than one turn
· Is a face-bored product
· Offers a high degree of drilling tolerance and is the only
connector of its type to provide pull-up of cabinet panels when
tightened
Technical andmounting details
Made of zinc, plastic
Made of zinc, plastic
2500 Pcs
1500 Pcs
Quickloc Ø25 flanged
14
00022 >
02190 > 877831
885
835
27.5
Flusbloc™assembly
System 4Fittings for Face-Boring OnlyFlushbloc™ / Flushfix™
Made of zinc
Angeldrivscrew for use with Flushfi x™
· The Angeldriv screw provides high level of tolerance
· Face drilling only required
· Corner joint and shelf fixing options
2500 Pcs Made of zinc, plastic
Other colours on request
Item number Whi
te
Zin
c
Bla
ck fl at head
Technical andmounting details
4000 Pcs (00022)
Dar
k b
row
n
Ø5x13
Ø25x1112
4.5
Ø5x13
Ø25x1112
4.5
15
14
16 17
16 17
13
Con
nect
ors
835
D
11 877
835 877
Ø5 x 10.5Ø10 x D
6
11
Ø5 x 13Ø8 x D
6
11
831
11
System 4Fittings for Face-Boring OnlyMinibloc™ / Twinbloc™
· One-piece connector range
· Face drilling only required
· Easy to use, foolproof home insertion
· Angeldriv screw tolerates good levels of
inaccurate drilling increasing consumer
confidence
* 02120 >
* assembly with screw
Minibloc 02141 >
* assembly with screw
Minibloc
Made of zinc, plastic
Made of zinc, plastic
Other colours on request
Item number Bla
ck
Whi
te
Dar
k b
row
n
Dri
lling
dep
th
Technical andmounting details
3000 Pcs (02120)
2500 Pcs (02107, 02101)
3000 Pcs
Angledriv screw > see page 14
16
System 5Cams and Dowels
System Features
Titus System 5 is a comprehensive
range of cam and dowel connecting
fi ttings with Klix and Quickfi t features
for all cabinet applications:
panel-to-panel, panel-to-hollow profi le,
back-to-back
Fittings are made from zinc, steel
and high grade pastic.
Dowels
• Quickfi t TL2, TL4 dowels a unique solution forfactory pre-insertion,high level of drilling tolerances
• Quickfi t dowelsquick hand insertion, easy assembly
• Diecast dowels (zinc)precise manufacturing, optimal shape and design
• Turned dowels (steel) ‘traditional’ design, smooth surface, best strength performance
• Combi dowels (zinc and steel) high precision of zinc, strength of steel, 100% dimensional accuracy and optimal performance
Titus Klix locking system enusres the
engagement of the interlocking teeth
on cam and dowel providing:
· vibration-proof joint
· rigid construction that will not loosen
is service or transit
Titus Klix™
The most advanced cam and dowel range
Quickfi t dowel
1Second
Single start thread
Standard dowel
7Seconds
Twin start thread
Combi dowel
4Seconds
Dowel insertion time comparison
Linear cam profi le assures smooth, fi rm tightening action and greater pull-up. The cam always locks at 2 o'clock lock (230°), enabling greater consumer confi dence in use while improving furniture quality.
2 o'clock lockSmooth closing
17
Con
nect
ors
±0.5 mm ±0.5 mm
max.25(35) min.23(33)ETHC ETHC
max.25ETHC
min.23ETHC
Quickfi t TL2 and Quickfi t TL4 are the
only available dowels that allow for
factory pre-insertion
· Easier packing
· Less damages in handling
· Perfect for the RTA market
Pre-inserted dowels
System Features
Optimal performance and perfect joint
even with inaccurate drilling.
Zinc/Combi dowel
+/-0.5mm
+/-1mm
+/-1mm
Quickfit TL2 dowel
Quickfit TL4 dowel
Drillingtolerances
+/-1mm
ETHC=Edge To Hole Center
Typical ETHC (EDGE TO HOLE CENTRE) measurements
0
2
4
6
8
10
12
14
16
18
20
ETHC
Nu
mb
er o
f O
ccu
ren
ces
Series1 0 0 3 0 5 6 4 14 4 9 10 18 15 9 11 16 7 11 8 0 3
23,0 23,1 23,2 23,3 23,4 23,5 23,6 23,7 23,8 23,9 24,0 24,1 24,2 24,3 24,4 24,5 24,6 24,7 24,8 24,9 25,0
+ / - 0.5 mm
measurements
Nu
mb
er o
f O
ccu
ren
ces
0
ETHC
Series1 0 0 3 0 5 6 4 14 4 9 10 18 15 9 11 16 7 11 8 0 3
23,0 23,1 23,2 23,3 23,4 23,5 23,6 23,7 23,8 23,9 24,0 24,1 24,2 24,3 24,4 24,5 24,6 24,7 24,8 24,9 25,0
Quickfit TL2/TL4
2
4
6
8
10
12
14
16
18
20
+ / - 1 mm
measurements
Nu
mb
er o
f O
ccu
ren
ces
0
ETHC
Series1 0 0 3 0 5 6 4 14 4 9 10 18 15 9 11 16 7 11 8 0 3
23,0 23,1 23,2 23,3 23,4 23,5 23,6 23,7 23,8 23,9 24,0 24,1 24,2 24,3 24,4 24,5 24,6 24,7 24,8 24,9 25,0
Quickfit TL2/TL4
2
4
6
8
10
12
14
16
18
20
+ / - 1 mm
Tolerance range
Tolerance range
Tolerance range
System 5Cams and Dowels
18
Quickfi t TL Connectors
2a. Either push dowel into edge hole or...
3. Assemble the panels 4. Tighten cam to lock dowel
Quickfi t TL dowel offers furniture
manufacturers a fast assembly system
providing high drilling tolerances.
It has a built-in self-adjustment feature,
which enables common drilling
inaccuracies to be overcome.
For the self-assembly furniture
consumer, Titus Quickfi t TL is the
most consumer friendly fi tting on the
market. Apart from the benefi t of fully
tightened joints and easy locking into
the same position, Quickfi t TL provides
an exceptionally smooth action when
tightened, requiring very little effort.
Drilling tolerances
Assembly
2b. Insert the dowel into side panel
System 5Cams and Dowels
Marginal inconsistencies of drilling
and the problems associated with the
natural movement of wood panels, no
longer present problems.
Quickfi t TL provides a tolerance of +1/-
1mm on drilling operation while
ensuring that the fi nal result is a
perfectly precise and aligned joint.
No other assembly fi ttings system can
offer such tolerances and still maintain
a perfect joint.
1. Press the cam into face board
19
Con
nect
ors
small bursting angle
Cam
Dowel
Zinc+steel technology for optimal strength and performance
Zinc+Steel Combi Dowels
toroidal head form
zinc body
twinstart thread
steel neck and head
positive stop collar
The steel neck and head provide
better resistance to torsion and pull-out
enabling a high performance joint
The Combi dowel combines steel and
a small amount of zinc to ensure high
precision and dimensional accuracy,
essential to provide furniture
manufacturers with the broadest
possible range of drilling tolerances.
Zinc body:Positive stop collar ensures correct
insertion depth
Twinstart for faster and more stable
insertion
System 5Cams and Dowels
The toroidal dowel head form
transfers the forces between cam
and dowel more effectively resulting
in a small cam bursting force.
100% dimensional accuracyassured
100% accura
te
20
±1 mm
max.25 min.23ETHC ETHC
05453 >
05503 >
05441 >
05474 >
5
5
8
8
8
A D2
24
34
24
34
24
880
880
880
880
05388 >
max.25(35) min.23(33)ETHC ETHC
System 5Cams and Dowels Quickfit-TL Dowels
Quickfit-TL2
· Available in Ø5mm and Ø8mm for panel-to-panel
applications
· Suitable for use with all Ø15mm Cam2000 and Cam3000
products
· ‘Klix’ locking feature provides a strong, vibration proof joint
· Highly tolerant in edge-inserted, TL4 also in face-inserted
applications
Technical andmounting details
Quickfit-TL4
Dri
lling
dis
tanc
e
Dri
lling
d
iam
eter
fo
r d
ow
el t
hrea
d
Item number Dar
k g
rey
Tolerance range
2000 Pcs Made of zinc, plastic
Made of zinc, plastic
Tolerance range
Edge to holetolerance
Hole to hole tolerance
1000 Pcs (05474)
2000 Pcs
Edge to holetolerance
Bla
ck
835
21
Con
nect
ors
05563 >
05137 >
05129 >
880
880
880
Ø8 12
A
ØD2
8
10
10
8
D2
24
24
34
A
System 5Cams and Dowels Quickfit Dowels
Quickfit P2F Dowels
Quickfit dowels
Made of zinc, plastic
· Available in Ø8mm and Ø10mm for panel-to-panel
applications and in Ø8mm for panel-to-hollow profile
applications
· Suitable for use with all Ø15mm Cam2000
· ‘Klix’ locking feature provides a strong, vibration
proof joint
· Depth stop collar for accurate insertion
Item number Dar
k g
rey
Dri
lling
dia
met
er f
or
do
wel
thr
ead
Dri
lling
d
ista
nce
Technical andmounting details
1500 Pcs (05129)
2000 Pcs
05414 > 835
Ø7.8
10
Ø8
24
Ø8 x thru
1.0 - 1.5 approx.
Ø8
A
Quickfit - P2F
Bla
ck
2000 Pcs Made of zinc, plastic
22
TA
09424 >
09423 >
09456 >
885
885
885
11
11
8.5
34
24
34
09430 > 8859.620
Made of steel and zinc
System 5Cams and DowelsCombi Dowel · High quality zinc-steel dowel with greater resistance to
torsion and pull-out
· Suitable for use with all Ø12mm and Ø15mm Cam2000
and Cam3000 products
· ‘Klix’ locking feature provides a strong, vibration proof
joint
· Twinstart thread for faster and reliable insertion
Combi dowel
Item number Zin
c
Dri
lling
d
ista
nce
Technical andmounting details
Philips PH2 head
Philips PH2 headCombi dowel
Made of steel and zinc
Thr
ead
le
ngth
2000 Pcs
1000 Pcs
InsertsMade of plastic
twinstart thread 02182-846
10000 Pcs
23
Con
nect
ors
05929 >
05757 >
05778 >
05753 >
*05774 >
*05751 >
883
883
885
885
ØD1
A
B
A
7-8
7-8
7-8
7-8
24
34
24
34
0*
0*
19
19
7-8
7-8
24
34
19
19
D1A B
883
883
ØD1
A
B
A
System 5Cams and DowelsDouble-ended Dowel
Dowelwithout circlip
Dowel with circlip
Made of steel or zinc
Made of steel
· Available in Ø7mm
· Suitable for use with all Ø12mm and Ø15mm
Cam2000 and Cam3000 products
· No circlip for increased tolerance
· Available in a variety of lengths to suit most panel-to-
panel applications
Item number Zin
c p
late
d
Zin
c
Dri
lling
dia
met
er
for
do
wel
bo
dy
Dri
lling
d
ista
nce
Pan
el
thic
knes
s*B=0 > no panel required
*Available upon request
Technical andmounting details
1000 Pcs
1000 Pcs (05753)
500 Pcs
24
05860 >
20° 25° 30° 35° 40° 45° 50° 55° 60° 65° 67,5° 70° 75° 80° 85°
13 61.9 57.9 55.3 53.5 51.7 50.5 49.5 48.6 47.8 47 46.7 46.4 45.7 45.1 44.6
15 64.6 60.1 57 54.7 52.9 51.5 50.3 49.3 48.3 47.5 47.1 46.7 46 45.3 44.7
16 66 61.2 57.9 55.4 53.5 52 50.7 49.6 48.6 47.7 47.3 46.9 46.1 45.4 44.7
B 18 68.8 63.3 59.6 56.9 54.7 53 51.6 50.3 49.2 48.2 47.7 47.3 46.4 45.6 44.8
19 70.1 64.4 60.5 57.6 55.3 53.5 52 50.7 49.5 48.4 47.9 47.5 46.5 45.7 44.8
22 74.2 67.6 63.1 59.7 57.1 55 53.2 51.7 50.4 49.1 48.6 48 46.9 45.9 45
23 75.6 68.7 63.9 60.4 57.7 55.5 53.6 52.1 50.6 49.4 48.8 48.2 47.1 46 45 x
883
Ø15
44
Ø7-8
44
44
B/2B
x
System 5Cams and DowelsAngled Dowels
· Suitable for applications requiring angled joints
· Suitable for use with all Ø12mm and Ø15mm
Cam2000 and Cam3000 products
· Adjustable angle from 90° to 180°
Item numberTechnical andmounting details
Angled dowel
Made of steel or zinc650 Pcs
Distance x in mm
Zin
c p
late
d
Minimum ordered quanity may be required
885
Zin
c
25
Con
nect
ors
05609 >
*05611 >
885
885
A B
ØD1
S L
43.5
53.5
39.5
49.5Ø5.9
L
S
Ø7
Ø11
A B
24
34
19
19
D1
7-8
7-8
1000 Pcs
System 5Cams and DowelsEnd Dowels
Mushroom dowel
Made of zinc
· Available in a variety of head and length combinations to
suit most end panel applications
· Suitable for use with all Ø12mm and Ø15mm Cam2000
and Cam3000 products
· ‘Klix’ locking feature provides a strong, vibration proof joint
· Both ‘mushroom’ and countersunk headed versions
available
Leng
th
Item number Zin
c
Tota
l len
gth
Pan
el
thic
knes
s
Dri
lling
d
ista
nce
Dri
lling
dia
met
er
for
do
wel
bo
dy
Technical andmounting details
*Available upon request
26
e hB D
09533 >
09495 >
885
885
15/16
12/13
12.5
10.5
7.5-8
6 min
11.9
9.9
09537 >
09536 >
885
885
15/16
18/19
12.5
14
7.5-8
9-9.5
11.9
13.2
Item number Zin
c
Dri
lling
fo
rd
ow
el
Cam
hei
ght
Pan
el
thic
knes
s
Dri
lling
d
epth
Cam3000
Technical andmounting details
PZ2 drive
Cam3000combined drive with HEX
Made of zinc1000 Pcs
Made of zinc1000 Pcs
Black available upon request
System 5Cams and DowelsØ15mm Cam3000 · Its optimised shape provides a more efficient cam profile with
smooth tightening action and greater dowel pull-up
· Suitable for use with Combi dowels, forged steel dowels,
Quickfit dowels, Quickfit TL2 dowels and Quickfit TL4 dowels
· ‘Klix’ locking feature provides a strong, vibration proof joint
· Cam-retaining pips ensure that a cam is held in panel
position prior to assembly
Ø15
eh
Ø15
eh
Black available upon request
Cover caps > see page 39
27
Con
nect
ors
System 5Cams and DowelsØ15mm Cam3000 S · Innovative design offers optimal performance
with maximum cost effectiveness
· Suitable for use with Combi dowels, forged steel dowels
and Quickfit dowels
· ‘Klix’ locking feature provides a strong, vibration proof joint
· Cam-retaining pips ensure that a cam is held in panel
position prior to assembly
Technical andmounting details
Made of zinc1000 Pcs
Cam3000 S/12 Philips PH2 drive
Item number Zin
c
09646 > 885
9.65.7
14.8 ±0.1
Cover caps > see page 39
28
DB e
05657 >
05676 >
05678 >
16
17.9
19.4
22/23
25/26
28/29
847
847
847
883
883
883
885
885
885
11-11.5
12.5-13
14-15.5
Cam2000 Ø15
· Available in a variety of head, drive recess and board
thickness versions to suit most applications
· Suitable for use with all Titus dowels
· “Klix” locking feature provides a strong, vibration proof joint
· Linear cam profile results in smooth, easy cam rotation and
dowel pull-up
Dri
lling
d
epth
Pan
el
thic
knes
s
Zin
c p
late
d
Zin
c
Dri
lling
fo
rd
ow
el
Item number Nic
kel
Other finishes on request
Headed Cam2000 available upon request
Technical andmounting details
System 5Cams and DowelsØ15mm Cam2000
Made of zinc500 Pcs (05676, 05678)
1000 Pcs
*05587 >
05653 >
05644 >
10min
10.9
12.7
12/13
12/13
15/16
847
847
6-6.5
6-6.5
7.5-8
883
883
883
885
885
885
*Ultrafl at - specially designed for thin panels (does not work
with TL dowels)
05654 >
05656 >
12.7
14
15/16
18/19
847
847
7.5-8
9-9.5
883
883
885
885
Cover caps > see page 39
29
Con
nect
ors
05575 >10 min12/13 835 885
Ø12
DB
6-6.5
e
System 5Cams and DowelsØ12mm Cam2000
Cam2000 Ø12
Made of zinc
· Suitable for all Titus screw-in dowels
· Available in a variety of head, drive recess and board
thickness versions to suit most applications
· Particularly suited to drawer front attachment
applications
· ‘Klix’ locking feature provides a strong, vibration proof
joint
· Linear cam profile results in smooth, easy cam rotation
and dowel pull-up
Dri
lling
fo
r d
ow
el
Zin
c
Dri
lling
d
epth
Pan
el
thic
knes
s
Item number Bla
ck p
aint
ing
p
late
Other finishes on request
Technical andmounting details
2000 Pcs
Ø12
Ø14
1 mm
05389 >10 min12 6 885Cam2000 Ø12 headed
Other finishes on request
Cover caps for Ø12 camsMade of plastic
1000 Pcs
05389 2000 pcs
30
System Features
A face boring connector family for
32mm system drilling with full range of
panel and application variants for all
cabinet manufacturing applications
· Minimum drilling requirements
· Linear cam design for constant
tightening loads when driving
· Angledriv feature on cam for
maximum driving comfort
· Interchangeable pins for wood,
plastic and steel applications
· Pins with twinstart drive for fast
insertion
· Interchangeable Quickfi t dowel
fastenings available
· Toolless fastening capable versions
· Back-to-back fastenings for
common vertical panel fi xing of
shelves
System 6 consists of a range of 20mm
diameter housings, Quickfi t™ and
conventional dowels, end dowels and
double ended dowels.
Housings are made from high grade
plastic or zinc, with zinc cams.
Wedgefi x-6 connector is a special
fastener without cam, simply to snap
onto a pre-inserted dowel.
System 6Quickfit Connectors
Side-entry insertion of shelf panel:
from the side or from the top
Drop-on insertion of shelf panel:
only from the top
Using drop-on connections allows
for one-man installation
Side-entryDrop-on
Applications Titus System 6 is ideal for use in
high volume production of case
goods, closet and garage storage
systems. Because no edge boring
is required, it is an excellent choice
for manufacturing environments with
limited drilling capacity.
31
Con
nect
ors
Outrigger Non outriggerOutrigger/Non outrigger
System Features
The angledriv feature on the cam
allows for the angled position of the
screwdriver with the locking action
creating a tight and secure joint.
1. Press the housing into face board 2. Press the dowel into side panel
3. Assemble the panels 4. Tighten the joint
Angledriv feature
Assembly
32
System 6Quickfit Dowels
Dowels · For panel-to-panel and back-to-back applications
· Suitable for applications with all Titus Ø20 and/or
Ø25mm System 6 housings
· Depth stop collar for accurate insertion
Item number Dar
k g
rey
Technical andmounting details
06408 > 880Dowel Ø5
Made of zinc, plastic5000 Pcs
Zin
c
Ste
el
C
Dri
lling
leng
th
for
do
wel
thr
ead
06479 > 880
Made of zinc, plastic5000 Pcs
Ø5 x 7.5 back-to-backapplications
2000 Pcs Made of zinc or steel
06401 >
06402 >
06406 >Ø5xC
9
8
11.5
Dowel 885
885
885
883
InsertsMade of plastic
twinstart thread 02182-846
10000 Pcs
33
Con
nect
ors
Ø4.8 Ø5.8
Ø4.8 Ø5.8
Ø4.8 Ø5.8
B
Ø5 x thru
B
System 6Quickfit ConnectorsDouble-ended Dowels
End Dowels
Pan
el
thic
knes
s
Item number Zin
c
Made of zinc
Double-ended dowel
Double-ended dowel
Double-ended dowel
· For 16mm, 18mm and 19mm board
· Suitable for applications with all Titus Ø20mm and/or
Ø25mm System 6 housings
Technical andmounting details
06412 >
06415 >
16
19
885
885
1.5
Ø9.5Ø4.8
Ø5 x thru
B
End dowel
Made of zinc
Made of zinc
Made of steel
2500 Pcs
2000 Pcs
06414 >
06416 >
16
19
885
885
06389 >16 883
06484 >16 885
Ø5 x thru
B
Ø5 x thru
B
34
06381 >
06385 >
H E
22
22
H E
drop on
side entry
835
835
927
927
898
898
841
841
835
835
927
927
898
898
841
841
877
877
861
877
877 861
15/16
18/19
7.75
9.25
B
12.5
14
D
H E
22
22
H E
drop on
side entry
H E
24
22
H E
drop on
side entry
06383 >
06387 >
15/16
18/19
7.75
9.25
15/16
18/19
7.75
9.25
12.5
14
12.5
14
Bla
ck
Can
dle
light
Bro
wn
Alm
ond
Whi
te
Silv
er
Nic
kel
pla
ted
Pan
el
thic
knes
s
System 620mm Knock-in Housing Non-outrigger
Side-entry
Item number
Made of plastic
Made of plastic
Made of zinc
Drop-on
Drop-on
· Available in 15mm/16mm and 18mm/19mm versions for drop-on and/or side-entry applications
· Available in all-metal or plastic/metal options· ‘Klix’ locking feature provides a strong vibration
proof connection· Compatible with all screw-in and Quickfit System 6
dowels
Dri
lling
d
epth
Other colours on Request
2500 Pcs
2500 Pcs
500 Pcs
Technical andmounting details
Other colours on Request
Cover capsMade of steel
06936-896-001
847
847
Ø20 x D
9.5
Be
06447 >
06449 >
e
Ø20 x D
9.5
Be
Ø20 x D
9.5
Be
35
Con
nect
ors
Be D
06395 >18/199.25 14
06439 >
06397 >
898
898
927
927
877
877
15/16
18/19
7.75
9.25
12.5
14
22
22
Pan
el
thic
knes
s
System 620mm Knock-in
Housing Outrigger
Item number
· Available in 15mm/16mm and 18mm/19mm
versions for drop-on and/or side-entry applications
· Available in all-metal or plastic/metal options
· Compatible with all screw-in and Quickfit System 6
dowels
Dri
lling
d
epth
Technical andmounting details
Drop-on
Made of plastic
Side-entry
1250 Pcs (06441)
2500 Pcs (06439)
835
835
835
927898841
841
841
877
Bla
ck
Can
dle
light
Bro
wn
Alm
ond
Whi
te
Other colours on Request
Other colours on Request
861S
ilver
9.532
Ø20 x DØ10 x 10.5
Be
9.532
Ø20 x DØ10 x 10.5
Be
22
06455 >
06457 >
847
847
12.5
14
7.75
9.25
Drop-on
1250 Pcs Made of plastic
Made of zinc500 Pcs
Nic
kel
pla
ted
9.532
Ø20 x DØ10 x 10.5
Be
36
06473 >
06465 >
877
877
06471 >
06472 >
877
877
Ø20 x D
9.5
Be
22
22
Ø20 x D
9.5
Be
15/16
18/19
15/16
18/19
B
835
835
898
898
835
835
898
898
12.5
14
12.5
14
D
Pan
el
thic
knes
s
System 6Wedgefix Housing
(no Inner Cam)
For use with screw-in dowels
2500 Pcs
Item number Whi
te
Made of plastic
Made of plastic
For use with Quickfitdowels
2500 Pcs
· Available in 12mm, 15mm/16mm and/or
18mm/19mm versions for Quickfit-6 and/or
Standard Dowel applications
· Available in a variety of plastic colours
· Wedgefix-6 housing allows easy customer hand-
assembly or factory automated insertion
· When used with Quickfit-6 dowels this provides a
true toolless fastening system
Bla
ck
Dar
kb
row
n
Dri
lling
d
epth
Other colours on request
Other colours on request
Technical andmounting details
37
Con
nect
ors
05409 > 885
05410 > 885
B
34
Ø8
B 10
13
B
18
18 min
15B
B/2
500 Pcs
500 Pcs
System 7Heavy Duty Ø20mm
Cam and Dowel
Cam Ø20
Dowel Ø7Ø10 mm thread
Made of zinc
Made of zinc
· Dowel available with Ø10mm eurothread and cam
available in Ø20mm for a variety of panel thicknesses
· ‘Klix’ locking feature provides strong, vibration proof
joint
· High strength product that eliminates the need for time
consuming metal inserts
Technical and mounting details Item number Z
inc
Pan
el
thic
knes
s
38
05971 > 883
05960 > 885
05917 > 885
34
Ø7-8
7.5/9
Ø15x12.5/14
Ø15x12.5/14
Prekrivanje
Zin
c
1000 Pcs
1000 Pcs
2500 Pcs
System 7High Strength Connectors
Contract Fix™ System
M6 Dowel 7x34
Housing cylinder 15x12
Made of steel
Made of zinc
Made of zinc
Grub screw
· High performance fastener
· Thread design gives repeatability
· Multi-drive recess
· Higher than average pull up
Item number Zin
c p
late
d
Technical and mounting details
InsertsMade of zinc
5000 Pcs
408.3391.600
39
Con
nect
ors
01029 > 831 835 867 8773.3
X
Bla
ck
Lig
ht b
row
n
Accessories for ConnectorsCover Caps · Available in a variety of colours
· Suitable for use with both pozi and hex cam drive features
· Suitable for use with various diameter cams· Both domed and flat versions available
Item number Dar
k b
row
n
Other colours on request
Technical andmounting details
Suitable for cams with Pozi 2 recess
Whi
te
Ø15
Ø25
Ø13
Ø29.5
Ø17
X
Ø17
2.5
Ø3.2
Ø4.2
1000 Pcs
Cover capØ17
Made of plastic
Ø29.5
Ø17
X
Ø17
2.5
Ø3.2
Ø4.2
1000 Pcs
Cover capØ17
Made of plastic
277-4225 > 370 390 330 350
Other colours on request
Suitable for cams with Hex recess
09630 > 831 835 877
Ø15
Ø25
Ø13
Ø17
Ø17
X
Ø17
2.5
Ø3.2
Ø4.2
Cover capØ17
1000 Pcs Made of plastic
For use with 09646 cam only
42
VisionThe world’s best engineering for
precision components
Components· Dampers
· Precision components
MissionTo provide manufacturers with
components’ solutions that
improve competitiveness
Furniture Hardware· Cabinet connectors
· Concealed hinges
· Soft closing systems
· Drawers and drawer systems
· Kitchen accessories
· Furniture locks
· Decorative
Titus Business Philosophies and Principles· Gain total knowledge of our
customers and their markets
· Focus on identifying and
creating high volume
component niches
· Meet our customers’
expectations with global
consistency
· Build long term associations
with customers, suppliers,
colleagues and shareholders
· Invest in the abilites of
individuals at every level
· Continuously enhance input
effi ciency and sustainability
Titus Group Strategy
Technologies
Furniture Hardware
Die casting
Tooling
Assemblysystems
Dampers
Connectors Drawers
Damped hinges
TitusonicFastFit
Damped components
Prec
isio
n C
ompo
nent
s
Technologies· Automation systems
· Precision castings
· Die cast technologies
· Tooling
· Ultrasound fastening technology
· FastFit technology
43
Con
nect
ors
Product DesignDesign and engineering of unique
components
Manufacturing Technologiesto improve productivity and
product quality
Manufacturing OperationsA wide array of technologies
and services required for high
volume production of precision
components available in-house
‘Totally Integrated Engineering’
Prod
uct D
esig
nM
anufacturing Technologies
Manufacturing Operations
Precision components
Consistent and repeatable
product quality
Fast time-to-market Unique product advantages
44
Quality
Continuous Improvement The Titus Group Mission, to
improve the competitiveness
of our customers, encourages
us to continuously improve our
products, services, processes and
competencies of our employees.
Fit for Purposeis our guiding principle.
QualityWe believe that the Titus Mission
is achieved most effectively
through the management of
our design, manufacturing and
service activities in conformance
with the ISO 9001 standard for
quality management. Quality
has a broad meaning for us:
it is our guide to the selection
of materials, work, processes,
internal relations and cooperation
with partners.
We invest in the abilities of
individuals at every level
Our policy is to ensure our
activities continuously enhance
input effi ciency and sustainability
At our main location in Dekani we
operate within the guidelines of
ISO 14001 and ISO 50001.
Management
responsibility
Resource
management
InputRequirements
Customers Customers
Value-adding activities
Information fl ow
Satisfaction
OutputProduct
realization
Mesurement,
analysis and
improvement
Product
45
Con
nect
ors
Global playerWorldwide design, manufacturingand distribution capabilities
.
.
NZ Hardware
PT Titus Tekform Indonesia
Titus d.o.o. DekaniTitusPlus d.o.o.Lama Avtomatizacija d.o.o.
Titus Tool Company Inc.TitusPlus Italia S.r.l.
TitusPlus Iberia SLU
CRO-Lama
Titus Polska Sp. z.o.o.
Titus Tool Company Ltd. Titus International Ltd.
Titus Furniture Fitting Trading (Shenzhen) Ltd.
Titus Tool Company Pte.
Titus Tekform Pty Ltd
EuropeTitusPlus d.o.o.Dekani 5SI-6271 DekaniSlovenia+386 566 90 213
+386 566 90 205 Fax
Titus d.o.o. DekaniDekani 5SI-6271 DekaniSlovenia+386 566 90 213
+386 566 90 205 Fax
Titus TechnologiesLama Avtomatizacija d.o.o.Dekani 5SI-6271 DekaniSlovenia+386 566 90 432
+386 566 90 431 Fax
Titus Tool Company Ltd.10 Blackburn Industrial EstateEnterprise WaySherburn in ElmetLS256NAUnited Kingdom+44 1977682 582
+44 1977680 481 Fax
CRO-LamaRakitska 10aRakitjeHR-10437 BestovjeCroatia+385 1 3323 033+385 1 3323 233 Fax
Titus Polska Sp. z .o.ul. Stefańskiego 17 APL-62-002 Suchy Las/PoznańPoland+4861 811 5402 Phone/Fax+4861 811 5684 Phone/Fax+4861 821 9362
TitusPlus Italia SrlVia Aquileia 9Frazione Olmi31048 San Biagio di Callalta (TV)+39 04 221 650 120
+39 04 221 650 136 Fax
TitusPlus Iberia SLUC/ Gran Bretanya 3408520 Les Franqueses del Valles (Barcelona)+34 938 715 404+34 938 605 498 Fax
AmericaTitus Tool Co. Inc.2800 156th Ave SESuite 135Bellevue, WA 98007USA800 762 1616 toll free+1 253 872 2829
+1 253 872 2827 Fax
AustraliaTitus Tekform Pty LtdUnit 1, 41-43 Whyalla PlacePrestons NSW 2170Australia+61 2 9286 0007
+61 2 9826 0074 Fax
NZ Hardware Enterprises Ltd34 Waipareira AvenueHendersonAuckland, New Zealand+64 9 837 0886
+64 9 837 8003Fax
AsiaTitus Tool Co. Pte. Ltd.5004 Ang Mo Kio Ave 5Techplace II #04-01Singapore 569872
+656383 3922
+656383 3178 Fax
Titus Furniture Fitting Trading Shenzen Ltd80B ShenFuBao Building 128Ronghua RoadFutian Free Trade ZoneShenzen ChinaPc 551238+867 558 348 0916 +867 558 359 2676 Fax
PT Titus Tekform IndonesiaTaman Tekno block L2 No. 6-7BSD Sector XI - Tangerang Selatan 15314Indonesia+ 62 21 75873578
+ 62 21 75873574 Fax
HeadquartersTitus International Ltd325 Euston RoadLondon
NW1 3AD, United Kingdom
www.titusplus.com
info@titusplus.com
www.titustekform.com.au
46
Index
00022 1400062 800068 800071 800077 800172 800180 701020 801029 3901042 801056 802077 902120 1502141 1502190 1403090 1103118 1103121 1103150 1103165 1103181 1105129 2105137 2105388 2005389 2905409 3705410 3705414 2105441 2005453 2005474 2005503 2005563 2105575 2905587 2805609 2505611 2505644 2805653 2805654 2805656 2805657 2805676 2805678 2805751 2305753 2305757 2305774 2305778 2305860 2405917 3805929 2305960 3805971 3806074 806077 806080 806381 3406383 3406385 3406387 3406389 3306395 3506397 3506401 3206402 3206406 3206408 3206412 3306414 33
06415 3306416 3306439 3506447 3406449 3406455 3506457 3506465 3606471 3606472 3606473 3606479 3206484 3306802 1306803 1309423 2209424 2209430 2209456 2209495 2609533 2609536 2609537 2609630 3909646 27277-4255 39
Item number Page Item number Page Item number Page Item number Page
Recommended