Corporate Overview Privately Held Company Established in 1991 Manufacturing and Distribution in: –...

Corporate OverviewCorporate Overview

• Privately Held Company

• Established in 1991

• Manufacturing and Distribution in:

– North America (WI)

– Europe (Sweden)

– Asia (Hong Kong)

• Yearly Growth Rate of 12-20%

• All Development in House

• All Key Manufacturing in House

Company TargetCompany Target

“Nimco aims at becoming the leading supplier ofElectrical and Hydraulic Control Systems

for customers that understand and value exact motion control and use this feature to increase their competitiveness.”

ManufacturingManufacturing

• Highly Automated Process

– Valve Bodies run 20-22 hours/day

– 6 Full Production Days Per Week

• Large CNC Machining Centers

• Advanced Measurement Equipment for

Quality Inspection

• 100% Testing of All Products Before

Dispatch

• Lab testing and research facilities

Research and DevelopmentResearch and Development

• All Design is made in SolidWorks®

– All Design Engineers with M.Sc. In Hydraulics

– Broad Knowledge of Valve and Motion Technology for Both Open Center

and Load Sensing Systems

Open Center Spool TechnologyOpen Center Spool Technology

Minimized Internal Spool Leakage

- Specially Developed High Precision Honing Method

- High Precision Hard Chrome Centerless Grinded Spools

- Radial Spool Grooves to Center the Spool in the Bore

Application Example – Front End LoaderApplication Example – Front End Loader

SVL

CV152 CV452 WK300

Front Loader Front Loader ValvesValves

CV112 – Front Loader ValveCV112 – Front Loader Valve

Design 2 Section Monoblock

Flow Range 50 l/min 13 USgpm

Max. Pressure 320 bar 4600 psi

Circuits Open CenterClosed Center

Pressure on Demand LS

Port Sizes BSP G3/8” SAE #6

Controls • Manual Hand Lever• Cable Control• Mechanical Joystick• El. Hydr. Prop.

Accessories • High Pressure Carry Over

CV152 – Front Loader ValveCV152 – Front Loader Valve

Design 2 Section Monoblock

Flow Range 70 l/min 18 USgpm

Max. Pressure 320 bar 4600 psi

Circuits Open CenterClosed Center

Pressure on Demand LS

Port Sizes BSP G3/8” SAE #6

Controls • Manual Hand Lever• Cable Control• Mechanical Joystick w. Locking Mech.

Accessories • High Pressure Carry Over• Quick Coupler

CV432 & CV432S – Front Loader ValveCV432 & CV432S – Front Loader Valve

Design 2 Section Monoblock

Flow Range 100 l/min (OC)70 l/min (S)

26 USgpm (OC)18 USgpm (S)

Max. Pressure 320 bar 4600 psi

Circuits Open Center (CV432)Series Circuit (CV432S)

Port Sizes BSP G1/2” SAE #8

Controls • Manual Hand Lever• Cable Control• Mechanical Joystick w. Locking Mech.

Accessories • High Pressure Carry Over

CV452 – Front Loader ValveCV452 – Front Loader Valve

Design 2 Section Monoblock Special Purpose Valve

Flow Range 110 l/min 29 USgpm

Max. Pressure 320 bar 4600 psi

Circuits Open CenterClosed Center

Pressure on Demand LS

Port Sizes BSP G1/2” SAE #10

Controls • Manual Hand Lever• Cable Control• Mechanical Joystick w. Locking Mech.

Accessories • Anti Shock Valves• Anti Cavitation Valves • High Pressure Carry Over• Multi Quick Coupler

EPCV452 – Front Loader ValveEPCV452 – Front Loader Valve

Design 2 Section Monoblock Special Purpose Valve

Flow Range 110 l/min 29 USgpm

Max. Pressure 320 bar 4600 psi

Circuits Open CenterClosed Center

Pressure on Demand LS

Port Sizes BSP G1/2” SAE #10

Controls • El. Hyd. Prop.

Accessories • Available with pressure amplifier for tractors with low-stand by-pressure (EPCV452-LSP)• Anti Shock Valves• Anti Cavitation Valves • High Pressure Carry Over• Multi Quick Coupler

CV652 – Front Loader ValveCV652 – Front Loader Valve

Design 2 Section Monoblock Special Purpose Valve

Flow Range 120 l/min 32 USgpm

Max. Pressure 320 bar 4600 psi

Circuits Open CenterClosed Center

Pressure on Demand LS

Port Sizes BSP G1/2” SAE #10

Controls • Manual Hand Lever• Cable Control• Mechanical Joystick w. Locking Mech.

Accessories • Anti Shock Valves• Anti Cavitation Valves • High Pressure Carry Over• Multi Quick Coupler

EPCV652 – Front Loader ValveEPCV652 – Front Loader Valve

Design 2 Section Monoblock Special Purpose Valve

Flow Range 120 l/min 32 USgpm

Max. Pressure 320 bar 4600 psi

Circuits Open CenterClosed Center

Pressure on Demand LS

Port Sizes BSP G1/2” SAE #10

Controls • El. Hyd. Prop.

Accessories • Available with pressure amplifier for tractors with low-stand by-pressure (EPCV452-LSP)• Anti Shock Valves• Anti Cavitation Valves • High Pressure Carry Over• Multi Quick Coupler

Circuit Selector Circuit Selector ValvesValves

SVKSVK

Design 6/2 Circuit Selector Bankable up to three units

Flow Range 50 l/min 24 USgpm

Max. Pressure 280 bar 4100 psi

Circuits Circuit Selector

Port Sizes BSP G3/8” SAE #6

Controls • Direct Acting Solenoid 12/24 VDC

Accessories • Bolt-On Cross Over Relief Manifold

SVBSVB

Design 6/2 Circuit Selector Bankable up to three units

Flow Range 90 l/min 24 USgpm

Max. Pressure 280 bar 4100 psi

Circuits Circuit Selector

Port Sizes BSP G1/2” SAE #8

Controls • Direct Acting Solenoid 12/24 VDC

Accessories • Bolt-On Cross Over Relief Manifold

SVLSVL

Design 6/2 Circuit Selector Special Purpose Valve

Bankable up to two units

Flow Range 90 l/min 24 USgpm

Max. Pressure 280 bar 4100 psi

Circuits Circuit Selector

Port Sizes BSP G3/8”BSP G1/2”

SAE #6SAE #8

Controls • Direct Acting Solenoid 12/24 VDC

Accessories • Cross Over Relief Valves• Soft Ride Activation Valve - Electrical or Manual• Electrical Tool Locking Valve

ControlsControls

WK300 – Wire ControlWK300 – Wire Control

Design Wire Control Joystick – 1 or 2 axis

Key Features • Reinforced Ergonomic Handgrip• Up to 3 El. Switches (6 A)• Easy to reach locking mechanism• Possibility to integrate customized logo or movement diagram on top of the handle• Robust and maintenance free• Easy to assemble• Possible to change the number of El. Switches

Epc 300Epc 300

Design 2-Axis Joystick

Signals Supply Voltage Output

10-30 VDC 4-20 mA

4,5-5,5 VDC 0,5-4,5 VDC

10-30 VDC 0,5-4,5 VDC

Angular Operating Range

X- and Y-axis: ±20°

Options 1 or 3 El. Push Buttons

CC8CC8

Design Analogue Joystick Control Card

Supply Voltage

• 10-30 VDC

Inputs • 8 Analogue Inputs (0-5 VDC)

Outputs • CAN-Bus Protocol • 5 VDC Reference Supply to Joystick

CAN-bus Interface

• 2.0 B - 150 Hz

Protection Class

• IP67 (In Standalone Version)

EDB 8-64EDB 8-64

Design I/O Driver Box 4+4 PWM

Supply Voltage

10-30 VDC

Inputs CAN-Bus Protocol

Outputs 8 (4+4) PWM

Current Feedback

100 – 1800 mA

CAN-bus Interface

2.0 B – 150 Hz

Chopper Freq. 30/200 Hz

Protection Class

IP67

EDB 16-64EDB 16-64

Design I/O Driver Box 8+8 PWM

Supply Voltage

• 10-30 VDC

Inputs • CAN-Bus Protocol• 8 Analogue Inputs (0-5 VDC)

Outputs • 16 (8+8) PWM Outputs• 1 Relay Output (4A)

Current Feedback

• 100 – 1800 mA

CAN-bus Interface

• 2.0 B – 150 Hz

Chopper Freq. • 30/200 Hz

Protection Class

• IP67

EasyProg™EasyProg™

• Programming Software for Nimco Electronic Modules

– Easy to Use and Intuitive

– Logic Based Programming

– Windows Based

– Available in Three Languages

• English

• German

• Swedish

– Possibility to Remote Connect to System via GSM-Link

• Trouble Shooting and Analysis

• Maintenance and Update