View
2
Download
0
Category
Preview:
Citation preview
© 2016, Crestron Electronics, Inc.
Crestron ResidentialEnd User Guide
Overview
© 2016, Crestron Electronics, Inc.
O VERVIEW
Welcome to your Crestron system!
This guide will show you the basics of operating the key features in your Crestron system.Every Crestron system is unique and custom tailored to you and your lifestyle. This guide covers the mainfeatures of your system, so see your Crestron dealer for details on the additionalcustomizations that they may have added.
There are 2 different apps for doing different tasks in the system. Here are the differences and when you should use each:
Use the Crestron app as the main app to run your entire system from your Phone or Tablet.
Your Crestron dealer has configured your tablets and phones to run the Crestron App.The Crestron App is used as your primary control from your mobile devices in conjunction with Touch Screens and remotes in your home.The majority of this guide depicts using your home system from the Crestron App using the iPad as the example,however the user experience is consistent across all the Touch Screens and remotes in your home.
Use this app for customizing Crestron environmental controls from your iPad
This app is not intended for day to day control of the entire system. Instead, use this app when you wish tocustomize lighting scenes, thermostats schedules, and more.See specific instructions later in this guide.
Crestron App
Crestron PYNG
Interfaces
© 2016, Crestron Electronics, Inc.
I NTERFACES
A Crestron Home can have a variety of user interfaces to accommodate your lifestyle.Crestron provides a consistent user experience across all TSW Touch Screens, iOS® devices,TSR-302 and MLX-3 remotes.
Crestron App: iPadWe will run through this tutorial utilizing the Crestron Appdemonstrated on an iPad.
1
Crestron App: iPhone2
1
2
© 2016, Crestron Electronics, Inc.
I NTERFACES
Touch Screens and hand-held remotes
Hard ButtonsPlease take note that certain Touch Screens such as the TSW-752, TSR-302and TST-602 will differ with Home, Power, Volume and various other control buttoncommands, as they are controlled with hard buttons.
1
Remote and KeypadsCrestron also provides other interfaces such as the MLX-3 and Keypads
2
1
2
PowerPower
Home
Home
Lights
Vol Up
Vol Down
Interface Functions
© 2016, Crestron Electronics, Inc.
HOME SCREEN
The “HOME SCREEN” will be displayed as a starting point to the user interface.
Currently Controlled RoomLocated in the upper left corner of the user interfaces, is the textdisplay for the Current Room that is being controlled.
1
Subsystems Scrolling ListThe HOME SCREEN will provide you a scrolling list to swipe leftand right with access to all of the controllable subsystems.
2
Power ButtonWhen the POWER BUTTON is selected, it willshow the power selection screen.
3
1
2
3
© 2016, Crestron Electronics, Inc.
HOME SCREEN / MED IA
Media SelectionWhen MEDIA is selected from your HOME screen, mediasource selection list will appear and reveal all the controllablesources for that currently selected room
1
Currently Controlled Room2
Home ButtonTakes you back to HOME screen
3
12
3
© 2016, Crestron Electronics, Inc.
1
2
3
HOME SCREEN / MED IA
DVR Control SelectionOn your DVR page, you can choose from the followingthree selections: • Presets • On-screen controls • Keypad
1
DVR Main ControlsFrom your DVR page (TiVo for this example), youwill have your main controls located on the rightside of the screen.
2
Source Sharing3
From the MEDIA source list and DVR has been selected
© 2016, Crestron Electronics, Inc.
M EDIA / VOLU ME C ON TR OL
Volume ButtonsRoom volume are located in the footer bar.
1
1
© 2016, Crestron Electronics, Inc.
Source Controls3
Source Sharing4
Source Selection2
Room Selection1
M EDIA / HEAD ER BAR
Your media source pages will reveal the following functions on thetop header bar:
1 2 3 4
© 2016, Crestron Electronics, Inc.
Room SelectionWhen you press your room selection tab,a list will appear with all rooms in your system.You can choose another room or view what roomsare playing currently
1
M EDIA / ROOM SELEC T ION
1
© 2016, Crestron Electronics, Inc.
Source SelectionFrom your currently playing media source page, you candecide to choose another source from the middle source tab.In this instance TiVo is displayed in the tab as it’s currentlyselected source.
1
Advanced Source SelectionAllows access to Advanced Source Selection List (next page).
2
M EDIA / SOUR C E SELEC T ION
1 2
© 2016, Crestron Electronics, Inc.
Advanced Source SelectionAvaialble for rooms that have more than one media endpoint (televsions, stereo systems, projectors etc), you can decide which source to route to any of up to five endpoints in a room.
In this instance TiVo is selected on the right in the Sources list as it’s the currently selected source, with the checkmark in theEndpoint list on the left denoting where it has already been routed.
1
Source SelectionReturns user to standard Source Selection tab.
2
SOURCE SE LEC T ION / AD V SOURCE SELECT ION
1
2
© 2016, Crestron Electronics, Inc.
Source ControlsThis tab will allow you quick acces to active sources.
1
M EDIA / SOUR C E C ON TR OLS
1
© 2016, Crestron Electronics, Inc.
Source SharingThis tab will allow you to share your source to other rooms.
1
M EDIA / SOUR C E SH AR IN G
1
© 2016, Crestron Electronics, Inc.
M EDIA / MED IA PLAYER
Media PlayerThis application will let you play Audio from a variety of sources.
1
Quick-list AccessPress this button to access the Quick-list for a given source.
2
Settings AccessPress this button to access the Settings Menu for the Media PlayerApplication.
3
1
2 3
© 2016, Crestron Electronics, Inc.
M EDIA / TV PR ESETS
TV PresetsThis application will let you add or edit TV presets.
1
Add Item ButtonPress the blue plus button on any blank item to add a new TV Preset from the Add/Edit Preset Interface (next page).
2
1
2
*note: If you already have some presets configured, you may need to swipe to theend of the list where the “ADD ITEM” is located
© 2016, Crestron Electronics, Inc.
TV PRESETS / AD D TV PR ESETS
SearchThis will allow you to search for a specific TV Channel by name.
1
Channel LineupScroll through this list to select the channel you wish to choose as your TV Preset.
2
Exit ButtonPressing this will exit back to the TV Preset main screen without making changes.
3
TV Preset Channel and NameSee next page
4
1
2
3
*note: If you already have a PIN configured you will be prompted to enter the PIN beforeadding items to or otherwise editing the Presets List
© 2016, Crestron Electronics, Inc.
ADD TV PRE SETS/ TV PR ESETS NAME
Selected IconThis is the icon that will appear on the Presets Application, touch this to select the desired icon from the channel lineup.
1
Channel Name and NumberOnce selected through the channel lineup, these fields are filled in by default with the selected channel’s name and number, simply touch to edit if so desired.
2
Save and ExitPressing Save will store the new Preset while Cancel will exitwithout adding.
3
1
2
3
© 2016, Crestron Electronics, Inc.
TV PRESETS / ED IT PR ESETS
TV Presets Slide-Out MenuTo edit a preset, press and hold the desired preset until the Slide-Out Menu appears to the right.
1
Move Preset ButtonPress this button to move the selected preset to a new position in the list.
2
Edit Preset ButtonPress this button to open the Add/Edit interface to edit theselected preset.
3
Add Preset ButtonPress this button to open the Add/Edit interface to add anew preset to the list.
4
Delete Preset ButtonPress this button to delete the selected preset from the list.
5
Settings ButtonSee next page
6
1 2 3 4
5 6
© 2016, Crestron Electronics, Inc.
TV PRESETS / ED IT PR ESETS
LanguageThis is a drop-down list of available languages (Only applicableif configured by your dealer).
1
ProviderThis is a drop-down list of available channel lineups (providers).
2
Sort ByPressing the ‘Ch. Number’ button will sort the stored preset list by Channel Number. Pressing the ‘Ch. Name’ button will sort thestored preset list by Channel Name.
3
PINPressing the ‘PIN ON/OFF’ button will enable or disable the PINfor the currently selected profile. Pressing the ‘Set PIN’ buttonwill allow setting the PIN value.
4
Save/CancelPressing the ‘Save’ button will save the current configuration settings. Pressing the ‘Cancel’ button will exit without saving.
5
3
2
1
4
5
© 2016, Crestron Electronics, Inc.
PYNG L IGHT IN G
Lighting Room Selection1
Lighting ControlsDimming and switching controls are located here.These are your individual controls for each lighting controlwithin the selected room.
2
Lighting ScenesScenes are stored in the program and selected here.Please set these scenes from your PYNG iPad setup project.
3
All Lights Raise and LowerPressing these buttons will raise or lower allcurrent light levels in the room.
4
Configurationsee next page
5
1
2
3
4
5
© 2016, Crestron Electronics, Inc.
PYNG L IGHT IN G C ON FIGU R AT ION
Lighting Room ListSelect which room you wish to control or not for thisparticular interface.
1
Default Lighting RoomSelect to choose rooms for thisparticular interface and choose the default room.
2
Confirm and exitConfirm your setting by pressing the check mark
3
1 2
3
*note: If a User Password has been set in PYNG’s Configuration menu,this view will be password protected. You will be presented with a passwordprompt to enter correct password to proceed.
© 2016, Crestron Electronics, Inc.
PYNG L IGHT IN G SC EN E C ON FIGURAT ION
Run the PYNG AppOpen the PYNG App and press the “Settings” button on theStartup page.
1
Configure PYNG SystemPress the “Configure System” button on the PYNG AppSettings page.
2
Setup PYNG SystemPress the “Create Scenes” button on the PYNG AppSystem Setup page.
3
Setup PYNG ScenesPress the “Configure Lighting Scenes” button on the PYNG AppScene Setup page.
4
PYNG Lighting Scenessee next page
5
To customize your lighting system, download the Crestron PYNG App from App Store on your iPad.The following section will walk you through customizing your lighting system from your iPad.When done, all changes will show up on your Touch Screens.
1 2
3 4
© 2016, Crestron Electronics, Inc.
Lighting Scene EditSelect which lighting scene you wish to edit using the PYNG App.Press the Wrench icon to edit the lighting level.
1
PYNG L IGHT IN G SC EN E C ON FIGURAT ION
1
© 2016, Crestron Electronics, Inc.
Lighting Scene Lighting Level EditAdd or remove loads, edit the level of individual loads, and edit fadetimes for the selected lighting scene.
1
PYNG L IGHT IN G SC EN E C ON FIGURAT ION
1
© 2016, Crestron Electronics, Inc.
PYNG CL IMATE
Climate Room ListSelect which room you wish to control or not for thisparticular interface
1
Current HVAC Mode Status2
Climate MenuOptions for scheduling and fan control
4
Current Room TemperatureConfirm your setting by pressing the check mark
3
Climate Set-pointSet climate set-point temperature
5
Climate ConfigurationHVAC settings selection
6
1
2
3
4
5
6
© 2016, Crestron Electronics, Inc.
PYNG CL IMATE MEN U
Climate MenuScrollable list will provide you options for scheduling and fan control
1
Climate Scheduling EventClimate scheduling event will be displayed here. This event is setwithin the PYNG Climate setup.
2
2
1
© 2016, Crestron Electronics, Inc.
PYNG CL IMATE MEN U
List of Controllable ThermostatsPressing this button will show you the listof thermostats you can choose to control forthis particular interface.
1
Default ThermostatPress this button to choose default thermostat for this interfacewhen you start Climate subsystem for the first time for this interface.
2
Confirm and exitConfirm your setting by pressing the check mark
3
1 2
3
*note: If a User Password has been set in PYNG’s Configuration menu,this view will be password protected. You will be presented with a passwordprompt to enter correct password to proceed.
© 2016, Crestron Electronics, Inc.
PYNG CL IMATE SC H ED U LE C ONFIGURAT ION
Run the PYNG AppOpen the PYNG App and press the “Settings” button on theStartup page.
1
Configure PYNG SystemPress the “Configure System” button on the PYNG AppSettings page.
2
Setup PYNG SystemPress the “Customize and Schedule” button on the PYNG AppSystem Setup page.
3
Setup PYNG SchedulesPress the “Schedule Climate Control” button on the PYNG AppSchedule Setup page.
4
PYNG Climate Schedulessee next page
5
To customize your climate system, download the Crestron PYNG App from App Store on your iPad.The following section will walk you through customizing your climate system from your iPad.When done, all changes will show up on your Touch Screens.
1 2
3 4
© 2016, Crestron Electronics, Inc.
Thermostat Schedule EditSelect which thermostat scheduled event you wish to editusing the PYNG App.
1 1
PYNG CL IMATE SC H ED U LE C ONFIGURAT ION
© 2016, Crestron Electronics, Inc.
Thermostat Schedule EditEdit the time, occurrence and temperature set-points forthe selected schedule event.
1 1
PYNG CL IMATE SC H ED U LE C ONFIGURAT ION
© 2016, Crestron Electronics, Inc.
TOUCHSCRE EN SETT IN GS
Touchscreen SettingsThis button will reveal background selection page
1
Audio SettingsThis button will reveal advanced audio adjustment controls
2
1 2
© 2016, Crestron Electronics, Inc.
AUDIO SETT IN GS
Audio SettingsThis is where current room audio adjustment can be done.Each settings change takes effect in a real time.
1 1
© 2016, Crestron Electronics, Inc.
WEATHER
Crestron Weather ApplicationCrestron weather application conveniently provideslocal weather on your touchscreen.
1
1
© 2016, Crestron Electronics, Inc.
POWER OPT ION S
Room OnIndicates that this room’s media is currently on. If the media is onpressing this button will turn Off the current room’s media.
1
SleepBrings up sleep page controls (see next page)
2
All Rooms OffWill turn off all the media sources in the house.
3
1
2
3
© 2016, Crestron Electronics, Inc.
POWER OPT ION S SLEEP
Sleep Time ActivationPress “+” and “-” buttons to set the sleep time
1
ActivateOnce you set the time press this button to activatesleep time function.
2
DisablePressing this button will disable sleep function
3
1
2
3
Recommended