View
182
Download
3
Category
Preview:
Citation preview
DASAR-DASAR MENGGAMBAR TIGA DIMENSI (3D) DENGAN CAD
Sistem Koordinat 3D Pembuatan Obyek Solid Standar Solid Editing (Operasi Boolean)
Tujuan Instruksional
Mahasiswa menguasai dasar-dasar pembuatan gambar tiga dimensi
(piktorial) dengan bantuan komputer (CAD) dan mempraktekkannya.
Sistem Koordinat 3D
Koordinat Kartesius 3D (3D Cartesian Coordinate System)
Koordinat Polar Silinder (Cylindrical Polar Coordinate System)
Koordinat Polar Bola (Spherical Polar Coordinate System)
Koordinat Kartesius 3D
Diformulasikan dalam bentuk (X, Y, Z).
Sumbu X mewakili bidang horisontal, sumbu Y mewakili bidang vertikal, dan sumbu Z mewakili bidang tegak (level)
Koordinat Polar Silinder Diformulasikan dalam
bentuk (jarak<sudut,ketinggian).
Pola @jarak<sudut sama dengan koordinat polar 2D hanya ditambahkan ketinggian sebagai ketinggian dari titik yang akan dibuat mengikuti arah sumbu Z.
Koordinat Polar Bola
Diformulasikan dalam bentuk (jarak<sudut<sudut ketinggian)
Pola jarak<sudut sama dengan koordinat polar 2D hanya ditambahkan sudut ketinggian sebagai pembentuk ketinggian titik yang akan dibentuk berdasarkan kemiringan sudut titik asal.
Bentuk Dasar 3D
Polysolid Box Wedge Cone Cylinder Torus Pyramid
Command: Polysolid Height = 4.0000, Width = 0.2500, Justification = CenterSpecify start point or [Object/Height/Width/Justify] <Object>: hSpecify height <4.0000>: 300Height = 300.0000, Width = 0.2500, Justification = CenterSpecify start point or [Object/Height/Width/Justify] <Object>: wSpecify width <0.2500>: 15Height = 300.0000, Width = 15.0000, Justification = CenterSpecify start point or [Object/Height/Width/Justify] <Object>: 0,0Specify next point or [Arc/Undo]: @300,0Specify next point or [Arc/Undo]: @0,300Specify next point or [Arc/Close/Undo]: @300,0Specify next point or [Arc/Close/Undo]: @0,-300Specify next point or [Arc/Close/Undo]: @300,0Specify next point or [Arc/Close/Undo]:
Command: Polysolid Height = 4.0000, Width = 0.2500, Justification = CenterSpecify start point or [Object/Height/Width/Justify] <Object>: hSpecify height <4.0000>: 300Height = 300.0000, Width = 0.2500, Justification = CenterSpecify start point or [Object/Height/Width/Justify] <Object>: wSpecify width <0.2500>: 15Height = 300.0000, Width = 15.0000, Justification = CenterSpecify start point or [Object/Height/Width/Justify] <Object>: 0,0Specify next point or [Arc/Undo]: @300,0Specify next point or [Arc/Undo]: @0,300Specify next point or [Arc/Close/Undo]: @300,0Specify next point or [Arc/Close/Undo]: @0,-300Specify next point or [Arc/Close/Undo]: @300,0Specify next point or [Arc/Close/Undo]:
PolysolidPolysolid
t.1
t.2
t.5t.6
height
width
BoxCommand: boxSpecify first corner or [Center]: 10,10,10Specify other corner or [Cube/Length]: @30,20Specify height or [2Point]: 40
40
2030
(10,10,10)
Bidang XY
XY
Z
Cylinder
Command: cylinderSpecify center point of base or [3P/2P/Ttr/Elliptical]: 100,100Specify base radius or [Diameter]: 40Specify height or [2Point/Axis endpoint] <40.0000>: 60
R
Bidang XY
center point
height
WedgeCommand: wedgeSpecify first corner or [Center]: 20,20Specify other corner or [Cube/Length]: @50,20Specify height or [2Point] <60.0000>: 80
80
2050
XY
height
first corner
secondcorner
Cone
Command: coneSpecify center point of base or [3P/2P/Ttr/Elliptical]: 20,20Specify base radius or [Diameter] <40.0000>: 40Specify height or [2Point/Axis endpoint/Top radius] <50.0000>: 60
R
Bidang XY
center point
height
Sphere
R
center point
Command: sphereSpecify center point or [3P/2P/Ttr]: 20,20Specify radius or [Diameter] <40.0000>: 40
Latihan 1
Buatlah model 3D dengan box dan wedge
20 20
60
60
20
10
Extrude
Revolve
Slice Command: sliceSelect objects to slice: (klik object)Select objects to slice:Specify start point of slicing plane or [planar Object/Surface/Zaxis/View/XY/YZ/ZX/3points] <3points>: 3pSpecify first point on plane: (klik t.1)Specify second point on plane: (klik t.2)Specify third point on plane: (klik t.3)Specify a point on desired side or [keep Both sides] <Both>: (klik t.4)
t.3
t.2
t.1
t.4
SliceCommand: sliceSelect objects to slice: 1 foundSelect objects to slice: (klik object)Specify start point of slicing plane or [planar Object/Surface/Zaxis/View/XY/YZ/ZX/3points] <3points>: xySpecify a point on the XY-plane <0,0,0>: (klik t.1)Specify a point on desired side or [keep Both sides] <Both>: (klik t.2)
t.1 t.
2
SectionCommand: sectionSelect objects: (klik object)Select objects:Specify first point on Section plane by [Object/Zaxis/View/XY/YZ/ZX/3points] <3points>: xySpecify a point on the XY-plane <0,0,0>: (klik t.1)
t.1
Solid Editing
Union Subtract Intersect
UnionCommand: unionSelect objects: (klik t.1) Select objects: (klik t.2)Select objects: (enter)
t.2
t.1
Model tergabung menjadi satu unit (objek)
SubtractCommand: subtractSelect solids and regions to subtract from ..Select objects: (klik object 1)Select objects: (enter)Select solids and regions to subtract ..Select objects: (klik object 2)Select objects: (enter)
t.2
t.1
Intersect
Command: intersectSelect objects: (klik object 1)Select objects: (klik object 2)Select objects: (enter)
t.2
t.1
CopyCommand: copySelect objects: (klik object 1)Select objects: (enter)Current settings: Copy mode = MultipleSpecify base point or [Displacement/mOde] <Displacement>: (klik t.1)Specify second point or <use first point as displacement>: (klik t.2)Specify second point or [Exit/Undo] <Exit>:
t.1
t.2
Mengganti arah sistem koordinat (UCS)
Command: ucsCurrent ucs name: *WORLD*Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis] <World>: (klik t.1)Specify point on X-axis or <Accept>: (klik X axis)Specify point on the XY plane or <Accept>: (klik Y axis yang dikehendaki)
t.1
Bidang XY
Latihan 2 Gambar model 3D dengan gambar 2D di-extrude, model dasar silinder dan subtract
extrude
Latihan 3
Ganti arah sistem koordinat
Latihan 4Gambarlah model 3D dengan kombinasi box, cylinder, lalu subtract dan fillet
Latihan 5
Recommended