View
4
Download
0
Category
Preview:
Citation preview
DECK MACHINERY Providing Engineering Systems and Solutions
for the Marine and Offshore Industry
2
Introduction: MEP (Marine Equipment Product) is a Total System Solu on Provider. With extensive contacts and resources available at our disposal, we are able to provide value‐added services, quality products and equipment, with compe ve prices.
MEP, a manufacturer of quality Deck Machinery, offers warranty and technical support on our MORDEC™ A.T.M. (Anchoring, Towing, Mooring) Systems any me anywhere. As an integrated provider of various products and services, MEP strives to provide customers with Mooring and Towing System solu ons that best meets their needs. With our extensive network of facili es in Singapore and China, and global business partners, we are able to reach out to a global market both efficiently and effec vely. Our areas of exper se includes engineering consultancy, designing and manufacturing of various deck top‐side equipment such as winch, windlass, cranes, hull fi ngs, anchors, chains, ropes and other accessories. As such, we are able to assist customers in achieving their technical requirements within their budgets, while incorpora ng customiza on requests.
In summary, MEP assures you our commitment to u lize our depth of experience and technical exper se with facili es that adhere to the most rigorous Marine & Offshore quality standards.
Thank You.
Best regards,
Ricky Lau MEP DECK SOLUTIONS PTE LTD
3
Contents:
LEGAL NOTICE : All rights reserved. All informa on provided in this catalogue supersedes previous issues and is to the best of
our knowledge. Specifica ons are subject to change without no ce. This catalogue is not meant to cons tute an opera onal
tool. It is intended purely as guidance to be used at user’s own risk, and no warran es or representa ons are given nor are
any duty of care or responsibility accepted by MEP and its Group of Companies for any consequences whatsoever resul ng
directly or indirectly from compliance with or reliance on any guidance or advice contained in the catalogue even if caused
by a failure to exercise reasonable care on the part of any of the aforemen oned par es.
Sec on I : Introduc on to MEP Systems
Sec on III : MORDEC™ Deck Machinery
Sec on IV : MORDEC™ Product Range
Sec on V : MORDEC™ Equipment Specifica on
Sec on VI : MORDEC™ Towing & Mooring System
Sec on VII : MORDEC™ Key Components List
Sec on II : Contents
4
Anchoring Towing Mooring System Provider
MORDEC™ CAPACITY
Combination Windlass / Winch
Anchor Windlass: up to 81mm U3
Towing / Mooring Winch: up to 300ton
AHT Winch: up to 300ton
Tugger Winch & Capstan: up to 25ton
Shark Jaw & Tow Pin: up to 500ton SWL
Deck Crane: up to 50ton SWL
Offshore Pedestal Crane: up to 50ton SWL
Accessories
Anchor Chain
Wire Rope
Hull Fittings
MORDEC™ DECK MACHINERY
5
Winches
PRODUCT RANGE
ANCHOR WINCH
LOAD / SPEED: 1000KN x 4m/min
ROPE / CAPACITY: 65mm x 1000mtr
MOORING WINCH
LOAD / SPEED: 300KN x 12m/min
ROPE / CAPACITY: 36mm x 1000mtr
WINDLASS
LOAD / SPEED: 149KN x 9m/min
CHAIN / ROPE / CAPACITY: 56mm (U3)/
ANCHOR HANDLING TOWING WINCH(WATERFALL)
LOAD / SPEED (BH): 1500KN x 6m/min (2000KN)
ROPE / CAPACITY: 58mm x 1500mtr
TOWING WINCH
LOAD / SPEED: 450KN x 8m/min
ROPE / CAPACITY: 48mm x 800mtr HOISTING WINCH SYSTEMS
LOAD: 500KN
6
Winches
PRODUCT RANGE
4 POINT MOORING SYSTEMS
LOAD / SPEED: 250KN x 15m/min
8 POINT MOORING SYSTEMS
LOAD / SPEED: 700KN x 7m/min
SINGLE POINT ANCHOR MOORING WINCH SYSTEMS
LOAD / SPEED: 1500KN X 6M/MIN 2500KN SHARK JAW CHAIN STOPPER & CHAIN FAIRLEAD
PIPE DAVITS
LOAD / SPEED: 500KN X 3M/MIN
LINEAR WINCH
LOAD / SPEED: 5000 KN X 2.4m /min
STORAGE REEL
LOAD / SPEED: 100KN x 15m/min
STORE: 76mm x 1500mtr—STEEL WIRE ROPE
7
Winches
PRODUCT RANGE
AIR WINCH
LOAD / SPEED: 100KN X 15 m/min
CAPACITY: 28mm SWR x 150mtr
TUGGER WINCH
LOAD / SPEED: 150KN X 10 m/min
CAPACITY: 28mm SWR x 350mtr
HYDRAULIC WINCH
LOAD / SPEED: 100KN X 15 m/min
SLIPWAY WINCH
LOAD / SPEED: 800KN X 10 m/min
ELECTRICAL WINCH
LOAD / SPEED: 250KN X 15 m/min
ANCHOR HANDLING /TOWING WINCH
LOAD / SPEED: 2500KN X 5 m/min
8
Capstan
PRODUCT RANGE
AIR CAPSTAN
LOAD / SPEED: 50KN X 15 m/min
80mm SYNTHETIC ROPE OR 20~28mm STEEL WIRE ROPE
CAPSTAN
LOAD / SPEED: 100KN X 10 m/min
WHARF CAPSTAN
LOAD / SPEED: 15KN X 15 m/min
ELECTRIC CAPSTAN
LOAD / SPEED: 120KN X 9 m/min & 200KN X 7 m/min
9
Cranes
PRODUCT RANGE
HOSE HANDLING CRANE
LIFTING CAPACITY: 50KN TO 200KN
PROVISION CRANE
LIFTING CAPACITY: 20KN TO 100KN
HOSE HANDLING CRANE AND PROVISION HANDLING FLOW BOOM CRANE
LIFTING CAPACITY: 50KN TO 200KN
10
Cranes
PRODUCT RANGE
KNUCKLE BOOM CRANE
HOIST LOAD: 300KN SWL
MIN. / MAX. OUT REACH: 4.9M / 26M
KNUCKLE CRANE
HOIST LOAD: 30KN TO 12M
TELESCOPIC CRANE
HOIST LOAD: 30KN TO 12M
DOUBLE JIB PORTAL CRANE
HOIST LOAD: 50KN TO 200KN SWL
MIN. / MAX. OUT REACH: 5M / 20M
11
Cranes
PRODUCT RANGE
LEVEL LUFFING CRANE
HOIST LOAD: 50KN TO 200KN SWL
MIN. / MAX. OUT REACH: 5M / 20M
FIXED PEDESTAL CRANE
HOIST LOAD: 100KN TO 20M / 200KN TO 100M
WORK BOAT DAVIT
HOIST LOAD: 100KN X 2.5M
12
Additional Equipment
PRODUCT RANGE
TOWING HOOK
ANCHOR FAIRLEAD REMOTE CONTROL
HYDRAULIC POWER
PACK / UNIT
CHAIN STOPPER
TENSION SHEAVE
FABRICATED STEEL BUOY
BOLLARDS
13
Tugger Winch Capacity: up to 20ton
Drive: Electrical / Electro-Hydraulic / Diesel-Hydraulic
EQUIPMENT SPECIFICATION
Model No. Drum Capacity Rated Pull @ 1st Layer Brake
Holding Main Dimension
Weight Power Required
L W H
MD-TGH-030-050SD 18MM DIA. X 220MTR 30KN X 15M/MIN 50KN 1546 1120 1060 1.1 Ton 11KW
MD -TGH-050-080SD 18MM DIA. X 220MTR 50KN X 10M/MIN 80KN 1671 1120 1060 1.5 Ton 11KW
MD -TGH-100-150SD 22MM DIA. X 250MTR 100KN X 10M/MIN 150KN 1985 1450 1360 2.3 Ton 22KW
MD -TGH-150-230SD 28MM DIA. X 350MTR 150KN X 12M/MIN 230KN 2350 1950 1923 4.4 Ton 45KW
MD -TGH-200-300SD 32MM DIA. X 500MTR 200KN X 10M/MIN 300KN 1760 2000 1923 4.6 Ton 55KW
14
Combined Windlass / Winch
Windlass Capacity: up to 120mm dia Chain
Winch Capacity: up to 20ton
Configuration: Single / Double Gypsy and Single / Double Drum
Drive: Electrical / Electro-Hydraulic / Diesel-Hydraulic
EQUIPMENT SPECIFICATION
Model No. Chain Size mm Pull Rate kN x
m/min
Brake Holding
kN Ctr Dis. C Width W Height
MD-WWH-019 19 72 x 110 30 x 15 600 1850 3500 1800 1750
MD -WWH-020 20.5 72 x 110 30 x 15 600 1850 3500 1800 1750
MD -WWH-022 22 90 x 110 50 x 15 900 2000 3700 2200 1950
MD -WWH-024 24 90 x 110 50 x 15 900 2000 3700 2200 1950
MD -WWH-026 26 90 x 110 50 x 15 900 2000 3700 2200 1950
MD -WWH-028 28 90 x 110 50 x 15 900 2000 3700 2200 1950
MD -WWH-030 30 110 x 110 50 x 15 1100 2100 3800 2400 2250
MD -WWH-032 32 110 x 110 50 x 15 1100 2100 3800 2400 2250
MD -WWH-034 34 110 x 110 50 x 15 1100 2200 3950 2400 2250
MD -WWH-036 36 110 x 110 50 x 15 1500 2200 3950 2400 2250
15
Anchor Handling / Towing Winch
Rated Pull Brake Hold-
ing
Main Dimension Power Required Model No. Drum Capacity @ 1st Layer L W H Weight
MD-AHTW-400WF 400kN X 8M/MIN 900KN 90KW
MD-AHTW-600WF 600kN X 9M/MIN 1200KN 150KW
MD-AHTW-750WF 750kN X 8M/MIN 1500KN 150KW
MD-AHTW-1000WF 1000kN X 6M/MIN 1800KN 180KW
MD-AHTW-1500WF 1500kN X 6M/MIN 2000KN 270KW
MD-AHTW-2000WF 2000kN X 6M/MIN 3000KN 360KW
MD-AHTW-2500WF 2500kN X 6M/MIN 3500KN 440KW
MD-AHTW-3000WF 3000kN X 6M/MIN 4000KN 500KW
EQUIPMENT SPECIFICATION
16
Anchor Windlass
Capacity: up to 81mm U3 Chain
Configuration: Single / Double Gypsy
Brake: Manual / Manual-Hydraulic
Model Chain Dia.
(0mm)
Working Load (kN)
Supporting Load (kN)
Work-ing
Speed
Warp-ing
Load
Warp-ing
Speed
Motor Power (kW)
Dimensions (mm) Weight (ton)
U2 U3 U2 U3 C L H W
MD-AWH-17 17.5 13 82 10 8 8.5 7.5 600 1915 1360 1075 1.42
MD-AWH-19 19 15 95 10 8 8.5 7.5 600 1915 1360 1075 1.52
MD-AWH-20.5 20.5 18 110 10 8 8.5 7.5 600 1915 1360 1075 1.52
MD-AWH-22 22 21 126 10 8 8.5 7.5 600 1915 1360 1075 1.52
MD-AWH-24 24 25 27 149 214 10 10 8.5 11 800 2295 1565 1200 2.46
MD-AWH-26 26 29 32 175 250 10 10 8.5 11 800 2295 1565 1200 2.46
MD-AWH-28 28 33 37 202 289 10 30 8.5 15 1000 2440 1900 1400 3.28
MD-AWH-30 30 38 43 231 331 10 30 8.5 15 1000 2440 1900 4900 3.28
MD-AWH-32 32 44 49 262 375 10 30 8.5 22 1000 2750 2160 1500 4.25
MD-AWH-34 34 49 55 295 422 10 30 8.5 22 1000 2750 2160 1500 4.25
MD-AWH-36 36 55 62 329 473 10 30 8.5 22 1000 2750 2160 1500 4.25
MD-AWH-38 38 61 69 365 522 10 30 8.5 30 1200 3200 2420 1650 6.4
MD-AWH-40 40 68 76 403 576 10 50 8.5 30 1200 3200 2420 1650 5.1
MD-AWH-42 42 75 84 442 630 10 50 8.5 30 1200 3200 2420 1650 6.4
MD-AWH-44 44 84 92 442 630 10 50 8.5 30 1200 3200 2420 1650 6.4
EQUIPMENT SPECIFICATION
17
Anchor Windlass / Winch
Lightweight construction Quiet direct drive motor Automatic freewheeling eliminate jaw clutch Easy operation Powerful manual brake Custom design to suit your needs
EQUIPMENT SPECIFICATION
Powerful solutions for high-speed vessels
Model
Suits Vessel Length
Input Power
Duty Pull
Duty Speed L1 L2 L3 H1 H2 W1
Winch Weight
(m) (KW) (KN) (m/min) (kg)
MD-AWH-010 15-25 3 10 16 780 1180 350 860 450 400 700 190
MD-AWH-015 25-40 4 15 16 865 1300 380 900 600 500 800 250
MD-AWH-025 40-55 5.5 25 13 1185 1600 648 1100 800 560 950 450
MD-AWH-030 50-60 7.5 30 13 1330 1830 650 1200 800 560 960 550
MD-AWH-060 60-70 11 60 13 1400 1900 650 1500 1250 1000 1200 1200
MD-AWH-090 70-80 15 90 12 1400 1900 650 1800 1550 1250 1300 1350
MD-AWH-120 80-130 30 120 11 1700 2000 850 1800 1550 1250 1300 1650
MD-AWH-150 100-140 50 150 11 2950 3500 900 1900 1600 1500 1750 2200
MD-AWH-200 100-150 50 200 10 3500 4350 1100 1900 1850 1500 1800 3500
W2
18
Hydraulic Combined Windlass / Mooring Winch
Model Chain Dia.
(0mm)
Work-ingLoad
(kN) Work-
ing Speed
(mmm)
Warp-ing
Load (kN)
Warping Speed
(mmm)
Drum Capacity (0 mm x
m)
Motor Power (kW)
Dimensions (mm) Weight (ton)
U2 U3 A B C D E MD-WMCH-32GG-DD 32 44 49 9 30 12 40x140 18.5 1500 3460 5180 1450 1400 6.24
MD-WMCH-34GG-DD 34 49 55 9 30 12 40x140 18.5 1500 3460 5180 1450 1400 6.24
MD-WMCH-36GG-DD 36 55 62 9 30 12 40x140 18.5 1500 3460 5180 1450 1400 6.24
MD-WMCH-38GG-DD 38 61 69 9 50 12 50x200 30 1600 3750 5540 1550 1600 7.32
MD-WMCH-40GG-DD 40 68 76 9 50 12 50x200 30 1600 3750 5540 1550 1600 7.32
MD-WMCH-42GG-DD 42 75 84 9 50 12 50x200 30 1600 3750 5540 1550 1600 7.32
MD-WMCH-44GG-DD 44 82 92 9 60 12 50x200 30 1800 4150 6130 1750 1700 9.54
MD-WMCH-46GG-DD 46 90 101 9 60 12 50x200 45 1800 4150 6130 1750 1700 9.54
MD-WMCH-48GG-DD 48 98 109 9 60 12 50x200 45 1800 4150 6130 1750 1700 9.54
EQUIPMENT SPECIFICATION
Double Windlass / Double Mooring Winch
19
Hydraulic Combination Windlass / Mooring Winch
EQUIPMENT SPECIFICATION
Model Chain Dia. (0mm)
WorkingLoad (kN) Working Speed
(mmm)
Warping Load (kN)
Warp-ing
Speed (mmm)
Drum Capacity (0 mm x
m)
Motor Power (kW)
Dimensions (mm) Weight (ton)
U2 U3 A B C D
MD-WMH-38 38 61 69 9 50 12 50x200 30 1000 2550 1550 1600 5.8
MD-WMH-40 40 68 76 9 50 12 50x200 30 1000 2550 1550 1600 5.8
MD-WMH-42 42 75 84 9 50 12 50x200 30 1000 2550 1550 1600 5.8
MD-WMH-44 44 82 92 9 60 12 50x200 30 1000 2700 1750 1700 6.5
MD-WMH-46 46 90 101 9 60 12 50x200 45 1000 2700 1750 1750 6.5
MD-WMH-48 48 98 109 9 60 12 50x200 45 1000 2800 1750 1750 6.8
MD-WMH-50 50 106 119 9 60 12 50x200 45 1000 2800 1750 1750 6.8
MD-WMH-52 52 115 128 9 80 12 60x200 45 1100 2900 1750 1750 8
MD-WMH-54 54 124 139 9 80 12 60x200 45 1100 2900 1750 1750 8
MD-WMH-56 56 133 149 9 80 12 60x200 55 1300 3300 2750 1850 10.5
MD-WMH-58 58 143 160 9 80 12 60x200 55 1300 3300 2750 1850 10.5
Single Windlass / Single Mooring Winch
20
Mooring Winch
EQUIPMENT SPECIFICATION
Model Drum Capacity Rated Pull @1st Layer Brake
Holding Main Dimension
Weight Power Required L W H
MD-MWH-050-080SD 18 x 300m 50KN X 18 M/MIN 80KN 1730 1120 1060 1.5 TON 22KW
MD-MWH-100-150SD 25 x 370m 100KN X 15 M/MIN 150KN 1985 1450 1360 2.3 TON 37KW
MD-MWH-150-230SD 28 x 700m 150KN X 12 M/MIN 230KN 2350 1950 1923 4.4 TON 45KW
MD-MWH-200-300SD 34 x 600m 200KN X 10 M/MIN 300KN 2760 2000 1923 4.6 TON 55KW
MD-MWH-300-450SD 38 x 100m 300KN X 10 M/MIN 450KN 3270 3180 2050 11.5 TON 75KW
MD-MWH-400-600SD 42 x 1500m 400KN X 10 M/MIN 600KN 3480 3456 2420 16 TON 110KW
MD-MWH-500-750SD 50 x 1200m 500KN X 18 M/MIN 750KN 3347 3640 2420 16 TON 150KW
MD-MWH-600-900SD 53 x1000m 600KN X 8 M/MIN 900KN 3350 3975 2600 19 TON 150KW
MD-MWH-700-1050SD 56 x1000m 750KN X 13 M/MIN 1000KN 3500 4725 2823 22 TON 225KW
MD-MWH-850-1300SD 56 x 1000m 800KN X 12 M/MIN 1200KN 3500 4725 2823 22 TON 270KW
MD-MWH-10001500SD 64 x 1000m 1000KN X 10 M/MIN 1500KN 3520 5090 3145 26.5 TON 270KW
21
Diesel-Driven Manual Winch
Weight Kg 200 600 800 1000
Parameter 10kN 8m / min 20kN 8m / min 25kN 8m / min 30kN 8m / min
Diesel Power 4kW / 1500rpn 6.2kW / 2400rpn 8.8kW / 2000rpn 8.8kW / 2000rpn
Diesel D185N D185N1 S195 S195
L1 x L2 x H 1300 x 1200 x 1000 1300 x 1200 x 1000 1500 x 1300 x 1300 1500 x 1300 x 1300
Gear Box 06A 06A 06A 06A
EQUIPMENT SPECIFICATION
22
Electric Winch
Model Rated Pull (kN)
Rated Speed
(mmm)
Drum Ca-pacity (2 mm x m)
Braking Force (kN)
Motor Power (kW)
Dimensions (mm) Weight (ton) A B C
MD-WE-400 400 7.5 52x750 1000 10010048 3400 4750 1950 25.4
MD-WE-520 520 5 56x850 1200 10010048 3550 5000 2175 29.6
MD-WE-650 650 5 56x850 1200 10010048 3550 5000 2175 29.6
MD-WE-750 750 5 60x850 1500 10010048 3700 5400 2400 35.9
MD-WE-850 850 4 65x1000 1500 13513565 3850 5800 2600 39.8
MD-WE-1000 1000 4 65x1000 1500 13513565 3850 5800 2600 42.5
EQUIPMENT SPECIFICATION
23
Air Winch
Model MD-WA-010 MD-WA-020 MD-WA-050 MD-WA-100
RATED PULL@1ST LAYER 10KN X24M/MIN 20KN X35M/MIN 50KN X35M/MIN 100KN X20M/MIN
DRUM CAPACITY Ø12MM X 60M Ø16MM X 100M Ø19MM X 120M Ø26MM X 200M
DIMENSION L690MM X W560MM X H400MM L690MM X W560MM X
H400MM L1350MM X W790MM X
H860MM L1650MM X W960MM
X H950MM
AIR CONSUMPTION 215CFM 425CFM 530CFM 850CFM
AIR PRESSURE 7 BAR 7 BAR 7 BAR 7 BAR
POWER RATE (KW) 3.5 13 20 30
WEIGTH (KG) 180 500 550 1300
EQUIPMENT SPECIFICATION
24
Storage Reel
Capacity: up to 20ton
Drive: Electro-Hydraulic
EQUIPMENT SPECIFICATION
Rated Pull Brake
Holding
Main Dimension Power
Required Model No. Drum Capacity @ 1st Lay-er L W H Weight
MD-SRH-50-80SD o52MM DIA. X 1000MTR 50KN X
15M/MIN 75KN 2100 2450 2250 4.3 Ton 18.5KW
MD-SRH-80-120SD o56MM DIA. X 1200MTR 80KN X
15M/MIN 120KN 2100 2550 2250 4.6 Ton 30KW
MD-SRH-100-150SD o76MM DIA. X 1500MTR 100KN X 15M/MIN 150KN 2100 2610 2250 5.0 Ton 45KW
25
Air Capstan
Model MD-VAC-010 MD-VAC-020 MD-VAC-050 MD-VAC-100
RATED PULL@1ST LAYER 10KN X20M/MIN 20KN X20M/MIN 50KN X15M/MIN 100KN X10M/MIN
DIMENSION L600MM X W400MM X H700MM L600MM X W450MM X
H750MM L750MM X W650MM X
H1300MM L950MM X W650MM X
H1500MM
AIR CONSUMPTION 198CFM 390CFM 430CFM 480CFM
AIR PRESSURE 7 BAR 7 BAR 7 BAR 7 BAR
POWER RATE (KW) 3.5 13 20 22
WEIGTH (KG) 1230 550 650 1300
EQUIPMENT SPECIFICATION
26
Capstan
Capacity: up to 20ton
Configuration: Vertical / Horizontal
Drive: Electrical / Electro-Hydraulic / Diesel-Hydraulic
EQUIPMENT SPECIFICATION
Type Pull KN Speed (M/Min)
Overall Dimensions mm.
D H1 H2 W D1 No. Of Holes
MD-VCH-010 10 15 180 220 535 610 450 4
MD -VCH-015 15 15 220 240 555 750 600 4
MD -VCH-020 20 15 250 260 625 970 750 6
MD -VCH-030 30 15 300 320 685 970 750 6
MD -VCH-040 40 15 350 400 715 1100 880 6
MD -VCH-050 50 15 400 450 915 1150 920 8
MD -VCH-060 60 15 400 450 915 1150 920 8
MD -VCH-080 80 15 500 600 1125 1500 1250 8
MD -VCH-100 100 15 500 600 1125 1500 1250 8
MD -VCH-120 120 15 600 680 1210 1500 1250 12
MD -VCH-150 150 15 600 680 1210 1500 1250 12
27
Hydraulic Linear Winch
Model MD-LW1500 MD-LW2400 MD-LW3500 MD-LW5000
RATED PULL 1500KN X2.4M/MIN 2400KN X2.4M/MIN 3500KN X2.4M/MIN 100KN X2.4M/MIN
WORKING PRESSURE 250 BAR 250 BAR 250 BAR 250 BAR
Max flow 200lpm 350lpm 460lpm 600lpm
DIMENSION L8000MM X W2200MM X H1000MM L8200MM X W2230MM X
H1100MM L8500MM X W2530MM X
H1200MM L8500MM X W2850MM
X H1300MM
WEIGHT 18 TON 24 TON 29 TON 35 TON
EQUIPMENT SPECIFICATION
28
Tow Pin And Shark Jaw
Capacity: up to 500ton SWL
Drive: Electro-Hydraulic
Bollard Pull (Ton) Holding Capacity (Ton) Power pack (KW)
55 200 1x22
70 300 1x22
90 350 1x22
120 500 1x30
200 750 1x30
EQUIPMENT SPECIFICATION
29
Marine Deck Crane
Types: Provision Crane/ Flow Boom Crane / Knuckle Boom Crane / Telescopic Crane
Capacity: Up to 50ton
Large range of working radius
Drive: Electrical / Electro-Hydraulic / Diesel-Hydraulic
EQUIPMENT SPECIFICATION
30
Marine Deck Crane
MODEL SWL
WORK RADIUS HOSTING
SPEED (M/MIN)
LUFFING SPEED (SEC)
SLEWING SPEED (RPM)
ELECTRIC MOTOR (KW)
A B C T WEIGHT MAX MIN
TON (M) (M) (MM) (MM) (ᴓ M) (MM) (KG)
HPC-01-06 1 6 1.5 10 45 0.5 7.5 1500 1575 800 12 2925
HPC-01-08 1 8 1.8 10 48 0.5 7.5 1500 1575 800 12 3150
HPC-01-10 1 10 2.2 10 51 0.5 7.5 1500 1575 800 12 3375
HPC-01-12 1 12 2.5 10 54 0.5 7.5 1500 1575 800 12 3600
HPC-01-14 1 14 2.9 10 57 0.5 7.5 1500 1575 800 14 3825
HPC-01-16 1 16 3.2 10 60 0.5 7.5 1500 1950 800 14 4050
HPC-02-06 2 6 1.5 10 45 0.5 11 1500 1575 800 14 3600
HPC-02-08 2 8 1.8 10 48 0.5 11 1500 1575 800 14 4050
HPC-02-10 2 10 2.2 10 51 0.5 11 1500 1575 800 14 4500
HPC-02-12 2 12 2.5 10 54 0.5 11 1500 1575 800 14 4900
HPC-02-14 2 14 2.9 10 57 0.5 11 1500 1575 800 14 5850
HPC-02-16 2 16 3.2 10 60 0.5 15 1500 1950 950 16 6300
HPC-02-18 2 18 3.6 10 65 0.5 15 1500 1950 950 16 6750
HPC-02-20 2 20 3.9 10 70 0.5 15 1500 2350 950 16 7200
HPC-03-08 3 8 1.8 10 53 0.5 18.5 1500 1575 800 14 4950
HPC-03-10 3 10 2.2 10 56 0.5 18.5 1500 1575 800 14 5624
HPC-03-12 3 12 2.5 10 59 0.5 18.5 1500 1575 950 16 6300
HPC-03-14 3 14 2.9 10 62 0.5 18.5 1500 1575 950 16 6750
HPC-03-16 3 16 3.2 10 65 0.5 18.5 1500 1950 950 16 7200
HPC-02-18 3 18 3.6 10 68 0.5 18.5 1500 1950 950 16 7650
HPC-03-20 3 20 3.9 10 75 0.5 18.5 1500 2350 1100 16 8100
HPC-03-22 3 22 4.3 10 80 0.5 18.5 1500 2350 1100 16 8550
HPC-04-08 4 8 1.8 10 53 0.5 22 1500 1575 950 16 6300
HPC-04-10 4 10 2.2 10 59 0.5 22 1500 1575 950 16 6750
HPC-04-12 4 12 2.5 10 62 0.5 22 1500 1575 950 16 7200
HPC-04-14 4 14 2.9 10 65 0.5 22 1500 1575 950 16 7650
HPC-04-16 4 16 3.2 10 68 0.5 22 1500 1950 1100 16 8100
HPC-04-18 4 18 3.6 10 75 0.5 22 1500 1950 1100 18 8550
HPC-04-20 4 20 3.9 10 80 0.5 22 1500 2350 1250 18 9000
HPC-04-22 4 22 4.3 10 85 0.5 22 1500 2350 1250 18 9450
HPC-05-08 5 8 1.8 10 55 0.5 26 1600 1575 950 16 7200
HPC-05-10 5 10 2.2 10 60 0.5 26 1600 1575 950 16 7985
HPC-05-12 5 12 2.5 10 65 0.5 26 1600 1575 1100 16 6775
HPC-05-14 5 14 2.9 10 70 0.5 26 1600 1575 1100 16 9565
HPC-05-16 5 16 3.2 10 77 0.5 26 1600 1950 1250 16 10350
HPC-05-18 5 18 3.6 10 84 0.5 26 1600 1950 1250 16 10800
HPC-05-20 5 20 3.9 10 91 0.5 26 1600 2350 1432 16 11250
HPC-05-22 5 22 4.3 10 98 0.5 26 1600 2350 1432 16 11700
HPC-05-24 5 24 4.6 10 105 0.5 26 1600 2630 1518 16 12150
HPC-05-26 5 26 5.0 10 110 0.5 26 1600 2650 1518 16 12600
HPC-06-08 6 8 1.8 10 55 0.5 30 1700 1575 950 16 7650
HPC-06-10 6 10 2.2 10 60 0.5 30 1700 1575 1100 16 8400
EQUIPMENT SPECIFICATION
31
Marine Deck Crane
MODEL SWL
WORK RADIUS HOSTING
SPEED (M/MIN)
LUFFING SPEED (SEC)
SLEWING SPEED (RPM)
ELECTRIC MOTOR (KW)
A B C T WEIGHT MAX MIN
TON (M) (M) (MM) (MM) (ᴓ M) (MM) (KG)
HPC-06-12 6 12 2.5 10 65 0.5 30 1700 1575 1100 16 9155
HPC-06-14 6 14 2.9 10 70 0.5 30 1700 1575 1250 16 9905
HPC-06-16 6 16 3.2 10 77 0.5 30 1700 1950 1250 16 10660
HPC-06-18 6 18 3.6 10 84 0.5 30 1700 2350 1432 16 12160
HPC-06-20 6 20 3.9 10 91 0.5 30 1700 2350 1518 18 12910
HPC-06-22 6 22 4.3 10 99 0.5 30 1700 2650 1518 18 13660
HPC-06-24 6 24 4.6 10 107 0.5 30 1700 2650 1518 18 14400
HPC-07-08 7 8 1.8 10 55 0.5 37 1800 2186 1100 16 8100
HPC-07-10 7 10 2.2 10 60 0.5 37 1800 2186 1100 16 9000
HPC-07-12 7 12 2.5 10 65 0.5 37 1800 2186 1250 16 9900
HPC-07-14 7 14 2.9 10 70 0.5 37 1800 2350 1250 16 10800
HPC-07-16 7 16 3.2 10 77 0.5 37 1800 2350 1432 16 11700
HPC-07-18 7 18 3.6 10 84 0.5 37 1800 2623 1432 16 12600
HPC-07-20 7 20 3.9 10 91 0.5 37 1800 2623 1518 16 13500
HPC-07-22 7 22 4.3 10 99 0.5 37 1800 2950 1518 18 14400
HPC-07-24 7 24 4.6 10 107 0.5 37 1800 2950 1595 18 15300
HPC-07-26 7 26 5.0 10 115 0.5 37 1800 3123 1595 18 16200
HPC-08-08 8 8 1.8 10 55 0.5 37 1800 2186 1250 16 9000
HPC-08-10 8 10 2.2 10 60 0.5 37 1800 2186 1250 16 9900
HPC-08-12 8 12 2.5 10 65 0.5 37 1800 2186 1432 16 10800
HPC-08-14 8 14 2.9 10 70 0.5 37 1800 2186 1432 16 11700
HPC-08-16 8 16 3.2 10 77 0.5 37 1800 2350 1518 16 12600
HPC-08-18 8 18 3.6 10 84 0.5 37 1800 2623 1518 16 13500
HPC-08-20 8 20 3.9 10 91 0.5 37 1800 2623 1595 16 14400
HPC-08-22 8 22 4.3 10 99 0.5 37 1800 2950 1595 18 15300
HPC-08-24 8 24 4.6 10 107 0.5 37 1800 2950 1795 18 16200
HPC-08-26 8 26 5.0 10 115 0.5 37 1800 3123 1795 18 17100
HPC-09-08 9 8 1.8 10 60 0.5 46 1800 2186 1250 16 9450
HPC-09-10 9 10 2.2 10 66 0.5 46 1800 2186 1432 16 10450
HPC-09-12 9 12 2.5 10 72 0.5 46 1800 2186 1432 16 10955
EQUIPMENT SPECIFICATION
32
Marine Deck Crane
MODEL SWL
WORK RADIUS HOSTING
SPEED (M/MIN)
LUFFING SPEED (SEC)
SLEWING SPEED (RPM)
ELECTRIC MOTOR (KW)
A B C T WEIGHT MAX MIN
TON (M) (M) (MM) (MM) (ᴓ M) (MM) (KG)
HPC-09-14 9 14 2.9 10 78 0.5 46 1800 2350 1518 16 12447
HPC-09-16 9 16 3.2 10 84 0.5 46 1800 2350 1518 16 13446
HPC-09-18 9 18 3.6 10 90 0.5 46 1800 2623 1595 16 14445
HPC-09-20 9 20 3.9 10 96 0.5 46 1800 2623 1595 16 15444
HPC-09-22 9 22 4.3 10 102 0.5 46 1800 2950 1795 18 16443
HPC-09-24 9 24 4.6 10 109 0.5 46 1800 2950 1795 18 17442
HPC-09-26 9 26 5.0 10 115 0.5 46 1800 3123 2035 18 18450
HPC-10-08 10 8 1.8 10 60 0.5 55 1900 2186 1432 16 10350
HPC-10-10 10 10 2.2 10 66 0.5 55 1900 2186 1432 16 11399
HPC-10-12 10 12 2.5 10 72 0.5 55 1900 2186 1518 16 12449
HPC-10-14 10 14 2.9 10 78 0.5 55 1900 2350 1518 16 13498
HPC-10-16 10 16 3.2 10 84 0.5 55 1900 2350 1595 16 15548
HPC-10-18 10 18 3.6 10 90 0.5 55 1900 2623 1595 16 15597
HPC-10-20 10 20 3.9 10 96 0.5 55 1900 2623 1795 16 16646
HPC-10-22 10 22 4.3 10 102 0.5 55 1900 2950 1795 18 17696
HPC-10-24 10 24 4.6 10 109 0.5 55 1900 2950 2035 18 18745
HPC-10-26 10 26 5.0 10 115 0.5 55 1900 3123 2035 18 19800
HPC-15-12 15 12 2.5 10 72 0.5 75 2000 2350 1595 16 12420
EQUIPMENT SPECIFICATION
33
Offshore Pedestal Crane
EQUIPMENT SPECIFICATION
MORDEC™ Offshore Pedestal Cranes have two types, wire rope luffing and cylinder luffing crane according to framework style.
The figuration is smaller
Settling for smaller work radius
The boom is tough and in all control
Specification serial:
Work radius : 4m ~ 35m
SWL: max. 25T
Hoist speed : 10m/min ~ 125m/min
Luffing speed : 40S ~ 100S
Slewing speed : 0.8r/min ~ 2r/min
Note: We are able to custom make crane to S.W.L 200Ton x 80mtr upon customer’s special request.
Trust boom can reduce the total weight and wind hinder
Settling for bigger work radius
Lifting capacity can satisfy the more weight
Specification serial:
Work radius : 4.5m ~ 50m
SWL: max. 50T
Hoist speed : 10m/min ~ 125m/min
Luffing speed : 50S ~ 100S
Slew speed : 0.8r/min ~ 2r/min
34
Offshore Lattice Boom Crane
EQUIPMENT SPECIFICATION
35
Offshore Lattice Boom Crane
MORDEC™ Offshore Lattice Boom Crane matches the demanding ex-pectations of today’s offshore requirements with competitive pricing, de-sign and engineering to adhere to exact specifications that will meet all applicable international design codes and classification society require-ments including API 2C. This is part of our effort to become your profes-sional turnkey procurement management with After-sales Service Support.
MORDEC™ Offshore Lattice Boom Crane ranges from 3 Ton to 50 Ton S.W.L. with 4m to 50m Working Radius with Operation up to Sea State 6, and is suitable for:
• Drilling platforms
• Production platforms
• FPSO
• Floating drilling vessels
• Accommodation platforms
• Diving support vessels
Pipe and cable laying vessels
Work barges
MEP is able to provide the following technical support to our customer:
• Design for high quality products with Strict test and inspection
• Precise installation and debugging
• High quality service within the period of equipment service life
• Provides service of storing spare parts for users
• Set up complete maintenance/inspection files
• Provides annual examination/repair/maintenance
• Provides inspecting/estimating service
• Provides storage service of disassembling crane
• Develops fabrication business of rethreading crane
• Offshore crane tenancy
• Training and certificate business of offshore crane drivers
• Improve technical competence through technical cooperation with in-ternational well-known crane manufacturing companies, becoming their machining/fabricating, maintenance/service base in China
• Provides fabricating business of life boat davits (with life boats)
• Utilizes advantages of field/equipment/personnel, provides machining/fabrication business of steel structures.
EQUIPMENT SPECIFICATION
36
Hydraulic Power Unit
Power Pack: up to 500KW
Configuration: Single / Double / Triple / Quadruple Motors
Model No. Oil Tank Capacity (L) Weight W H
MD-HPU-1x18.5 300 max45cc 1150 600 1100 0.65 TON
MD -HPU-1x22 475 max100cc 1300 700 1210 0.7 TON
MD -HPU-1x30 475 max100cc 1300 700 1250 0.7 TON
MD -HPU-1x45 750 max140cc 1500 850 1550 1.0 TON
MD -HPU-1x55 850 max140cc 1600 850 1600 1.1 TON
MD -HPU-1x75 1100 max140cc 1800 1000 1600 1.4 TON
MD -HPU-2x11 750 max28cc 1200 1200 1300 1.0 TON
MD -HPU-2x15 750 max28cc 1200 1200 1300 1.0 TON
MD -HPU-2x22 680 max45cc 1200 1100 1300 1.1 TON
MD -HPU-2x30 800 max71cc 1400 1100 1500 1.35 TON
MD -HPU-2x45 1250 max140cc 1600 1500 1550 1.6 TON
MD -HPU-2x55 1500 max140cc 2000 1830 2000 2.5 TON
MD -HPU-2x75 1600 max140cc 2000 1830 2100 2.6 TON
MD -HPU-2x90 1600 max190cc 2000 1830 2100 2.7 TON
MD -HPU-3x75 2600 max140cc 2500 1830 2300 3.2 TON
MD -HPU-3x90 2600 max190cc 2500 1830 2300 3.5 TON
MD -HPU-4x75 3100 max140cc 3000 1700 2300 4.3 TON
MD-HPU-4x110 3600 max190cc 4500 1900 2600 5.5 TON
EQUIPMENT SPECIFICATION
37
Hydraulic Pipe Davit
Model MD-PDH-150 MD-PDH-500
RATED PULL 150KN X10M/MIN 500KN X3M/MIN
WORKING PRESSURE 250BAR 250BAR
Max flow 130LPM 130LPM
DIMENSION L3500MM X W1500MM X H3500MM L4500MM X W2250MM X
H6700MM
WEIGHT 15 TON 25 TON
EQUIPMENT SPECIFICATION
38
Pipe-Lay Barge 8 Point Mooring Winch System
Pipe-Lay Barge Pipe Laying Equipment
Pipe-Lay
TOWING & MOORING SYSTEM
39
Anchoring Towing Mooring System
MORDEC™ 8 PT MOORING
TOWING & MOORING SYSTEM
40
Anchoring Towing Mooring System
MORDEC™ MOOR-ING WINCH
TOWING & MOORING SYSTEM
WINCH SYSTEM
MORDEC™ OFFSHORE CRANE
MORDEC™ ANCHOR FAIRLEADER
MORDEC™ WIRE ROPE
MORDEC™ FABRICATED DELTA ANCHOR
41
Anchoring Towing Mooring System
MORDEC™ TOW PIN & SHARK JAW
MORDEC™ TUGGER WINCH
MORDEC™ TUGGER WINCH
MORDEC™ CAPSTAN
MORDEC™ MARINE DECK CRANE
MORDEC™ HYDRAULIC POWER PACK
TOWING & MOORING SYSTEM
42
Anchoring Towing Mooring System
MORDEC™ ANCHOR HANDLING TOWING WINCH
MORDEC™ ANCHOR MORDEC™ ANCHOR CHAIN
MORDEC™ DECK FITTINGS
MORDEC™ CHAIN STOPPER
MORDEC™ COMBINATION ANCHOR WINDLASS /
MOORING WINCH
TOWING & MOORING SYSTEM
43
Quality Assurance
KEY COMPONENTS
International brand components, spare parts to ensure long life and easy to replace (durability). Reduce maintenance costs. After service - professional commissioning works team, the product has a global warranty.
44
HEAD OFFICE ADDRESS (SINGAPORE): 9D Jurong Pier Road Block 3 #03‐01, MEP Building, Singapore 619177 Tel: (65) 6265 6860 /6266 2910 Fax: (65) 6266 3267 Email: info@mepsystems.com.sg Website: www.mepsystems.com.sg
OUR MANUFACTURING PLANT:
SIN SENG HUAT MACHINERY MANUFACTURE (JIANGSU) CO., LTD
MEP DECK SOLUTIONS PTE LTD
MEP SYSTEMS GROUP OF COMPANIES:
MANUFACTURING OFFICE ADDRESS (CHINA): No.28, Binhai Avenue, Binhai Industrial Park, Qidong Economic Development Zone, Jiangsu, China 226200 Tel: (86) 513 83905068 Fax: (86) 513 83905800 Email: info@sinsenghuatqd.com Website: www.sinsenghuat.com
MORDEC INTERNATIONAL PTE LTD
“Your Needs for Today and Tomorrow.”
Recommended