View
37
Download
3
Category
Preview:
Citation preview
It’s functionality and reliability that countDR-Bas rope hoists
Now up to
50 t
2
The DR-Bas rope hoist with load capacities of up to 50 t is a Demag hoist that stands head and shoulders above other products in this class due to its key features:
DR-Bas rope hoists – functional and reliable
FDR-Bas foot-mounted hoist
EKDR-Bas low-headroom travelling hoist
EZDR-Bas double-rail crab
EUDR-Bas standard-headroom travelling hoist
40
651-
1
410
61
40
652-
1
40
653
-1
Demag Bas products: robust, durable technology
As a global technology leader, we offer solutions for material flow, logistics and industrial drive applica-tions with subsidiaries and produc-tion facilities worldwide – also in India. Our range of products includes:
■■ cranes■■ hoists■■ industrial drives■■ services.
Bas products – functionality driven by German engineeringWe have developed our Demag Bas products specifically with the world’s emerging markets in mind. The uncompromising functionality and quality of these products have been designed to meet the high standards you have come to expect of German engineering.
In particular, Demag Bas products are:
■■ functional and reliable■■ tough and robust■■ safe and durable■■ economical to run■■ simple to operate■■ easy to maintain.
■■ low wear■■ long service life, technically categorised in accordance with FEM
■■ specification based on national and international engineering standards
■■ many unique features to ensure safe, reliable and economical operation
■■ good value for money.
40
654
402
60-4
FDR-Bas foot-mounted hoists: the direct solution for installation in cranes and for plant engineering
FDR-Bas foot-mounted hoists are designed in such a way that they can be attached on any of three side surfaces to facilitate direct connection. Rope lead-off in virtually any direction meets all the needs of customers in the crane and plant engineering sectors.
The universal mounting options enable trolley parts and foot brackets to be attached to the unit
At a glance
■■ Can be integrated direct into prepared structures or special crabs
■■ Can be used in two mounting positiions, each with one rope lead-off direction
■■ Can be attached on three sides■■ Load capacities up to 50 t.
Now up to
50 t41
063
-1
3
40
641
-1
4
EUDR-Bas standard-headroom travelling hoist:for use in restricted spaces
With a choice of two travelling hoists ■■ EUDR-Bas standard-headroom travelling hoist and
■■ EKDR-Bas low-headroom travelling hoist
crane owners benefit from two travelling hoists for single-girder overhead travelling cranes and suspension monorails.
Drop-stop arrangement with an integrated guide roller and buffer makes the travel motion of these monorail travelling hoists particularly safe
At a glance
■■ For particularly restricted spaces
■■ Drop-stop arrangement with an integrated guide roller
■■ Load capacities up to 12.5 t.
40
651-
1
5
EKDR-Bas low-headroom travelling hoist:allows optimum utilisation of space
Universal travel wheels made of steel for travel motions that are gentle on the rails. The integrated drop-stop provides for additional safety.
Travelling hoistsThe travelling hoists are equipped with four flangeless universal wheels and guide rollers for low-noise and low-wear travel motions. They can be fitted with a thrust rocker or counter-weights. The travel units provide:
■■ stepless adjustment to the required flange width across a wide range
■■ precise and reliable travel even under arduous conditions, for example, if the runway is dusty or irregular.
At a glance
■■ Excellent approach dimensions thanks to compact design
■■ Optimum utilisation of the space available
■■ Various hook paths for different building heights
■■ Drop-stop arrangement■■ Integrated guide rollers■■ Load capacities up to 12.5 t■■ Optionally equipped with counter-weights or as a weight-saving model with a thrust rocker arrangement.
410
614
076
4-4
36
EZDR-Bas 3; 5; 10 double-rail crabs: Safe handling of loads weighing up to 12.5 t
Besides the two different monorail travelling hoists, we also supply EZDR-Bas double-rail crabs for applications on double-girder cranes.
Handling loads with a double-girder overhead travelling crane
At a glance
■■ Excellent approach dimensions thanks to compact design
■■ Makes optimum use of headroom
■■ Various hook paths for different building heights
■■ Particularly favourable hook paths
■■ Standard track gauge dimensions of 1,400, 2,240 and 2,800 mm
■■ Anti-derailment and lift-off protection
■■ Load capacities up to 12.5 t.
40
652-
14
0766
-3
3 7
EZDR-Bas 20 double-rail crab: Safe handling of loads weighing up to 50 t
Safely handling large loads: EZDR-Bas 20 with load capacities up to 50 t
Our EZDR-Bas 20 double-rail crab extends the load capacity range for ZKKE-Bas double-girder overhead travelling cranes up to 50 t. Thanks to its space-saving design, the double-rail crab achieves an optimum C dimension and, therefore, a gain in lifting height. Favourable approach dimensions offer optimum utilisation of the available space.
At a glance
■■ Comapct design for minimum approach dimensions
■■ Particularly favourable C dimension
■■ EZDR-Bas 20 cross-travel speeds: 25/6.3 m/min
■■ Standard track gauge dimensions: 1800/2240/2800/3550 mm
■■ Load capacities up to 50 t
410
62
Now up to
50 t
8
Cylindrical-rotor motor■■ Low-vibration, quiet running characteristics
■■ Thermal contacts to protect against overheating
■■ Designed for extended operating periods, classified to FEM
Gearbox■■ Three stages, helical■■ Quiet running characteristics
■■ Lubricated for life.
Bottom block■■ Ergonomically designed, operator friendly
■■ Simple handling thanks to:■■ two handle recesses■■ large hook with generous hook opening.
Ergonomically designed
Functional
Safe
Robust
40
606
-14
40
600
-2
DR-Bas rope hoist technology:economical to run, simple to operate
9
Electric equipment
■■ Completely modular and easy to access
■■ Conventional contactor control■■ A Siemens module controls the timer functions.
Overload protection■■ Electronic, pin integrated in rope retaining crosshead
■■ Evaluated in the central electrical system.
Geared limit switch■■ Safe, reliable and durable:
■■ switches off hoist unit at limit positions
■■ emergency cut-off in the upper and lower positions as standard and additional safety thanks to fast-to-slow cut-off
■■ operating limit switch function as an option.
Control pendant■■ Ergonomically designed, operator friendly
■■ Complies with local regulations■■ type DST-Bas, cable-connected
■■ two sizes, 7 and 9■■ for two speeds■■ plug-in control cable■■ strain relief cords are vulcanised to withstand the stresses of tough day-to-day use
DC disk brake ■■ With brake release monitoring■■ Minimum safety factor of 1.8■■ Immediate response thanks to integrated brake module
Rope drum and guide■■ Generously dimensioned drum ■■ Precisely machined rope grooves■■ Rope guide made of tough plastic■■ Reliable operation even in critical environments:
■■ rope lead-in via hardened pressure rollers mounted in anti-friction bearings
■■ inclined pull up to 4° without touching the rope guide.
Reliable
40
600
-31
40
600
-30
40
600
-22
40
606
-12
310
DR-Bas rope hoists: Specifications at a glance
Size Load capacity[t]
Hook path[m]
Lifting speed 1)
[m/min]
Group of mechanisms
FEM/ISO
Load capacity[t]
Hook path[m]
Lifting speed 1)
[m/min]
DR-Bas 3
2/1 4/1
1122030
12/2
4m / M7 261015
6/11.25 3m / M6 2.5
1.6 2m / M5 3.2
2 10/1.6 1Am / M4 4 5/0.8
DR-Bas 5
2/1 4/1
1.6122030
12/2
4m / M7 3.261015
6/12 3m / M6 4
2.5 2m / M5 5
3.2 10/1.6 1Am / M4 6.3 5/0.8
DR-Bas 10
2/1 4/1
3.2122030
10/1.7
4m / M7 6.361015
5/0.84 3m / M6 8
5 2m / M5 10
6.3 8/1.2 1Am / M4 12.5 4/0.6
DR-Bas 20
2/1 4/1
6.320 30 40 54
10/1.7 12/2 15/2.5
4m / M7 12.510 15 20 27
5/0.8 6/1 7.5/1.38 3m / M6 16
10 2m / M5 20
12.5 8/1.3 10/1.7 12/2 1Am / M4 25 4/0.7 5/0.8 6/1
6/1 8/1
20 6.710
13.31828
3.3/0.55 4/0.7 5/0,8
4m / M7 257.510
13.521
2.5/0.4 3/0.5 3.8/0.625 3m / M6 32
32 2m / M5 40
40 2.7/0.5 3.3/0.6 4/0.7 1Am / M4 50 2/0.3 2.5/0.4 3/0.5
DR-Bas rope hoist technical data
Other reeving arangements on request
Type of enclosure:DR-Bas 3; 5; 10: IP54DR-Bas 20: IP55
■■ Cross-travel speeds 1):■■ EUDR-Bas: 5/20 m/min■■ EKDR-Bas: 5/20 m/min■■ EZDR-Bas: 6.3/25 m/min
■■ Flange widths:■■ EUDR-Bas 3 and 5: 110 – 300 mm■■ EUDR-Bas 10: 116 – 300 mm■■ EKDR-Bas 3 and 5: 110 – 400 mm■■ EKDR-Bas 10: 116 – 400 mm
1) All speed details given for 50 Hz
■■ EZDR-Bas track gauge dimensions: 1,400 / 2,240 / 2.800 mm
■■ EZDR-Bas 20 track gauge dimensions: 1800 / 2240 / 2800 / 3550 mm
■■ Voltage: 380 – 415 V, 50 Hz■■ Control voltage: 48/110 V, 50 Hz
Other possible voltages:380 V, 60 Hz440 V, 60 Hz460 - 480 V, 60 Hz575 V, 60 Hz
3739
9
3 11
DR-Bas Designer online planning tool: Planning made easy
DR-Bas Designer, our online planning tool, will support you with project engineering of crane systems using DR-Bas rope hoists. The professionally designed and, as a result, intuitive user interface ensures that you will quickly and easily find the right solution to meet your needs.
You can download corresponding CAD files from our website and integrate them into your design drawings.
You can access DR-Bas Designer via Demag Shop:www.demag-shop.comJust a mouse-click away: CAD files can be integrated into your installation
design
Demag Bas crane sets – perfectly matched components
DR-Bas rope hoists are also an integral part of complete Demag Bas crane sets which, besides the travelling hoist, include these components:
■■ crane end carriages■■ travel units■■ complete electric equipment for crane and hoist unit.
Bas crane sets: complete, pre-configured component packages without crane girders
40
820
Every single component of a Bascrane set reflects Demag‘s crane expertise, including the assembly process, which is particularly user friendly and follows plug-and-play principles.
Dynamic markets need dependable solutions
1213
EN
/IN
21
3 69
3 4
4 EN
70
1 IS
813
No
liabi
lity
for
erro
rs o
r om
issi
ons.
Sub
ject
to
chan
ge.
Easy to maintainDR-Bas rope hoists are very reliable, modular products. Maintenance and repair – whether on complete units or individual components – are quick and easy on these quality products, which are designed and built to European standards.
If you do not do your own maintenance, service and repair work, Demag’s Service engineers with their technical experience and skills are ready to help quickly and efficiently.
Reliable spare parts supply DR-Bas spare parts are supplied:
■■ quickly and flexibly through our integrated network of branch offices and partners
■■ with absolute reliability for many years
■■ at particularly attractive value-for-money prices.
Demag ServiceYour reliable partner – ensuring safe and efficient operation and main-taining the value of your investment.
Capable after-sales service ensures the highest degree of availability
403
57-2
34
0357
-23
Demag Cranes & Components (India) Pvt. Ltd.Gat No 330, 332, 333, 334, Nanekarwadi (Chakan)Tal-Khed, District Pune - 410501 IndiaPhone: +91 2135 614200 Fax: +91 2135 614300 Email: info@demagcranes.co.inwww.demagcranes.co.in
Recommended