View
28
Download
1
Category
Preview:
Citation preview
]LIFTINSTITUUT
Ptìfì0ilfisBvA I fìfi1
EU.TYPE EXAM I NATION CERTI FICATE
ñ
Certificate no.Description of the product
Trademark, type
Name and address of themanufacturer
Name and address of thecertificate holder
Certificate issued on thefollowing requirements
Certificate based on thefollowing standards
Test laboratory
Date and number of thelaboratory report
Date of EU-type examinationAdditional documents with thiscertificate
Additional remarks
Conclusion
Issued by Liftinstituut B.V.identification number Notified Body 0400,
commissioned by Besluit no. 2016-0000038870
: NL16-400-1002-071-10 Revision no.: 1
: Bi-directional overspeed governor for safety gears with remotecontrol and UCMP features
: Aspar, OSG A
: Aspar Asansör Aksamlan Pazarlama San. Ve Tic. A.$.1187. Sokak No:8Ostim, Ankara, Turkey
: Aspar Asansör Aksamlan Pazarlama San. Ve Tic. A.$.1187. Sokak No:8Ostim, Ankara, Turkey
Lifts Directive 201 4l33lEU
Parts of: EN81-1 :1 998+43:2009, EN81 -20:2014, EN81-50:2014
None
None
June 2015 - April 2016, December 2016Report belonging to the EU- type examination certificate no.:N L 1 6-400- 1 002-07 I -10REV. I
Max. nominal speed : 1,60 m/sMax. tripping speed : 2,16 m/sMax. response time UCM coil : 40 msecMax. distance travelled from engagement ofUCM locking disc to safety gear operation : 130 mmThe tensile force up and down for each tensioning system aredetermined in the test with the mentioned tensioning force withnew rope and groove and written down in chapter 2 of thereport. See also chapter 5 of the report belonging to this EU-type examination certificate for additional conditions.The safety component meets the requirements of the LiftsDirective 201413318U taking into account any additionalremarks mentioned above.
ing. J.L. van VlietManaging Director
Certification decision byDate of issue
Valid until
20-12-2Q16
01-04-2021
Liftinstituut B.V. . Buikslotermeerplein 381 . P.O. BOX 36027 1020 MA Amsterdam Netherlands www.liftinstituut.nl' Registered at the KvK under number 341 57363 '
F23-02-16-v12.0
LIFTINSTITUUT
EU-TYPE EXAM I NATION CERTI FICATE
ñPtìfìiltJ[]s
flvA I tl8/
Certificate no.Description of the product
Trademark, type
Name and address of themanufacturer
Name and address of thecertificate holder
Certificate issued on thefollowing requirements
Certificate based on thefollowing standards
Test laboratory
Date and number of thelaboratory report
Date of EUtype examinationAdditional documents with thiscertificate
Additional remarks
Conclusion
lssued by Liftinstituut B.V.identification number Notified Body 0400,
commissioned by Besluit no. 2016-0000038870
: NL16-400-1002-071-11 Revision no.: 1
: Bi-directional overspeed governor for safety gears with remotecontrol and UCMP features
: Aspar, OSG B
: Aspar Asansör Aksamlan Pazarlama San. Ve Tic. A.$.1187. Sokak No:8Ostim, Ankara, Turkey
: Aspar Asansör Aksamlan Pazarlama San. Ve Tic. A.$.1187. Sokak No:8Ostim, Ankara, Turkey
Lifts Directive 201 4l33lEU
Parts of: EN81 -1 :1998+43:2009, EN81-20:2014, EN81-5O:2014
None
None
June 2015 - April 2016, December 2016Report belonging to the EU- type examination certificate no.:NL 1 6-400- I 002-07 1 -1 1 REV. 1
Max. nominal speed : 2,00 m/sMax. tripping speed :2,62 mlsMax. response time UCM coil : 40 msecMax. distance travelled from engagement ofUCM locking disc to safety gear operation : 145 mmThe tensile force up and down for each tensioning system aredetermined in the test with the mentioned tensioning force withnew rope and groove and written down in chapter 2 of thereport. See also chapter 5 of the report belonging to this EU-type examination certificate for additional conditions.The safety component meets the requirements of the LiftsDirective 20141331EU taking into account any additionalremarks mentioned above.
ing. J.L. van VlietManaging Director
n decision byDate of issue
Valid until
20-12-2016
01-04-2021
Liftinstituut B.V. Buikslotermeerplein 381 P.O. BOX 36027 1020 MA Amsterdam Netherlands www.liftinstituut.nl' Registered at the KvK under number 34157363 '
F23-02-16-v12.0
Recommended