View
4
Download
0
Category
Preview:
Citation preview
ExtErior Products by TFP
Cedar is an environmentally friendly product.
It leaves a much smaller carbon footprint than cement,
PVC, or metal-based products. Job trim ends and sawdust
naturally decompose (as a tree would) minimizing any
impact on the Earth.
Properly installed cedar products are low maintenance,
and will provide decades of problem-free service.
Evergreen exterior products are manufactured by Terminal
Forest Products (TFP), a name trusted in the building industry
for decades.
TFP is so confident in the performance of Evergreen that
a 50 year warranty is provided on every purchase.
Evergreen products are made in the USA and are
readily available in all standard sizes and profiles from
your supplier.
TRIM and FASCIASIDING and PANELING
trim & FasciaEvergreen finger-joined boards are generally used in exterior applications such as fascia, trim, corner boards, skirting and for detail around windows and doors. It can be specified in a variety of finishes and sizes.
clEar Kd FingEr-JoinEd/EdgE gluEd ProductssPEciFiEd lEngths 8' 10' 12' 16' 20'
availablE vErtical grain or a & btr
1 x 2 ThRouGh 1 x 12 (Net 11/16") S4S* or S1S2E**
5/4 x 4 ThRouGh 5/4 x 12 (Net 1") S1S2E
2 x 2 ThRouGh 2 x 12 (Net 1½") S4S and S1S2E
*S4S products are surfaced four sides with 1/16” radius eased edge
**S1S2E products are surfaced one side, two edges with a bandsaw face and square edges
other widths and lengths are available on a special order basis
siding & PanEling Cedar bevel siding and paneling are one of the most popular siding choices. both are available with a smooth or resawn face to precisely match your trim and fascia. Evergreen comes in convenient and easy to handle long lengths to increase the speed and ease of installation.
clEar Kd FingEr-JoinEd/EdgE gluEd ProductssPEciFiEd lEngths 8' 12' 16' 20'
Bevel Siding
½ x 4, ½ x 6, ½ x 8 Clear Vertical Grain heart or Aye/Smooth or Resawn face
¾ x 8, ¾ x 10 Clear Vertical Grain heart or Aye/Smooth or Resawn face
Paneling
x 4, x 6, x 8
Clear Vertical Grain heart or A & btr Face, Smooth or Resawn Face
CERTIFICATIoNSAll TFP operations are FSC and PEFC Chain of Custody certified.
FINIShING TIPS:
• FACToRy oR FIELD-APPLy oIL-bASE PRIME CoAT oN ALL SuRFACES
• uSE 2 CoATS oF 100% ACRyLIC LATEx PAINT FoR ToP CoATS (Do NoT uSE STAINS)
• uSE hoT-DIPPED GALVANIzED ALuMINIuM oR STAINLESS STEEL NAILS
• CAuLk ALL JoINTS wITh PoLyuREThANE, PoLySuLPhATE, oR LATEx-SILICoNE CAuLk
• FILL ALL NAIL hoLES wITh A GooD quALITy wooD PuTTy
12180 MITChELL RoAD, RIChMoND, bC V6V 1M8 TEL. 604-717-1200 FAx. 604-321-4223 www.TERMINALFoREST.CoM
PRINTED IN CANADA oN RECyCLED PAPER
1x2 ThRouGh 1x12 (Net 11/16") S4S or S1S2E Mixed or
Vertical Grain
2x2 ThRouGh 2x12 (Net 1½") S4S and S1S2E Mixed Grain
only
5/4 x 4 ThRouGh 5/4 x12 (Net 1") S1S2E Mixed or Vertical Grain
PEFC/26-31-27Promoting sustainable
forest managementwww.pefc.org
The mark of responsible forestryCert. no. QMI-COC-001038© 1996 Forest Stewardship
Council A C
Recommended