F-Tool gets the point

41

50 50

40

Ø6.4

Uniblank ALUVersion: Fitted without machining of body.Application: To mount electrodes and workpieces of various shapes.To fit blank: As required.

Article no. Article Quantity Weight CodeFT 02131 Uniblank ALU without EWIS preparation Set of 10 pieces 2.20 kg BFT 02132 Uniblank ALU with EWIS preparation Set of 10 pieces 2.20 kg B

Delivered without chucking spigots.

Uniplate ALUVersion: Surface 50 x 50 mm faced, including 2 x M6 bolts for each unit.Application: To mount electrodes and workpieces with a base surface of more than 50 mm.To fit blank: With 2 x M6 bolts into the base surface.

Article no. Article Quantity Weight CodeFT 02133 Uniplate ALU without EWIS preparation Set of 10 pieces 2.20 kg BFT 02134 Uniplate ALU with EWIS preparation Set of 10 pieces 2.20 kg B

Delivered without chucking spigots.

Prisround ALU 15mmVersion: Square 16.0 mm milled. Including 2 stud bolts. Fixed stop X, Y from the centre 7.5 +/- 0,05 mm. Clamping depth 19 mm, Fixed stop hZ = 22 +/- 0.05 mm.Application: To mount electrodes and work pieces with a shank size of less than 15 mm.To fit blank: Insert and tighten setscrews. If necessary, center with spacer plate FT 01092.

Article no. Article Quantity Weight CodeFT 02135 Prisround ALU 15mm without EWIS preparation Set of 10 pieces 2.00 kg BFT 02136 Prisround ALU 15mm with EWIS preparation Set of 10 pieces 2.00 kg B

Delivered without chucking spigots.

NEW!

W i t h o r w i t h o u t E W I S p r e p a r a t i o n

F-Tool gets the point T h e n e w F - To o l A L U h o l d e r s a r e a n e c o n o m i c a l t e r n a t i ve f o r c l a m p i n g e l e c t r o d e b l a n k s . To c l a m p t h e e l e c t r o d e b l a n k s c e n t r i c e ve n m o r e c o m f o r t a b l e , we o f f e r a s s t a n d a r d e l e c t r o d e h o l d e r s f o r t h r e e d i f f e r e n t s h a f t s i ze s a n d t w o d i f f e r e n t s l o t w i d t h s . .

T h e s p e c i a l a d v a n t a g e s f o r t h e F - To o l A L U h o l d e r s a r e :

- Ve r y e c o n o m i c

- L ow we i g h t , ve r y e a s y i n h a n d l i n g a n d t r a n s p o r t

- F o r t h e m a n u a l o r a u t o m a t i c a p p l i c a t i o n w i t h o u r w i t h o u t E W I S c h i p

- S o i l - r e s i s t i n g a n d t r o u b l e - f r e e , c o n i c a l f o r m e d s u p p o r t i n g f o o t s

C o n i c a l f o r m e d s u p p o r t i n g f o o t s S o l i d c e n t r i n g p l a t e , m o u n t e d d i r e c t l y

E R O W A L i n k

E R O W A l i n k

Uniholder ALU 15mmVersion: Slot 15.5 mm routed including 2 stud bolts. Clamping depth 13 mm. Fixed top hZ = 28 +/- 0.05 mm.Application: To mount electrodes and work pieces with a clamping width up to 15 mm.To fit blank: Insert and tighten setscrews. If necessary, center with spacer plate FT 01092.

Article no. Article Quantity Weight CodeFT 02141 Uniholder ALU 15mm without EWIS preparation Set of 10 pieces 1.80 kg BFT 02142 Uniholder ALU 15mm with EWIS preparation Set of 10 pieces 1.80 kg B

Delivered without chucking spigots.

Uniholder 20mmVersion: Slot 20.5 mm routed including 2 stud bolts. Clamping depth 13 mm. Fixed top hZ = 28 +/- 0.05 mm.Application: To mount electrodes and work pieces with a clamping width up to 20 mm.To fit blank: Insert and tighten setscrews. If necessary, center with spacer plate FT 01092.

Article no. Article Quantity Weight CodeFT 02143 Uniholder ALU 20mm without EWIS preparation Set of 10 pieces 1.80 kg BFT 02144 Uniholder ALU 20mm with EWIS preparation Set of 10 pieces 1.80 kg B

Delivered without chucking spigots.

Article no. Article Quantity Weight CodeFT 02137 Prisround ALU 20mm without EWIS preparation Set of 10 pieces 2.00 kg BFT 02138 Prisround ALU 20mm with EWIS preparation Set of 10 pieces 2.00 kg B

Delivered without chucking spigots.

Prisround ALU 25mmVersion: Square 26.0 mm milled. Including 2 stud bolts. Fixed stop X, Y from the centre 7.5 +/- 0,05 mm. Clamping depth 25 mm, Fixed stop hZ = 22 +/- 0.05 mm.Application: To mount electrodes and work pieces with a shank size of less than 25 mm.To fit blank: Insert and tighten setscrews. If necessary, center with spacer plate FT 01092.

Article no. Article Quantity Weight CodeFT 02139 Prisround ALU 25mm without EWIS preparation Set of 10 pieces 1.80 kg BFT 02140 Prisround ALU 25mm with EWIS preparation Set of 10 pieces 1.80 kg B

Delivered without chucking spigots.

Prisround ALU 20mmVersion: Square 21.0 mm milled. Including 2 stud bolts. Fixed stop X, Y from the centre 7.5 +/- 0,05 mm. Clamping depth 19 mm, Fixed stop hZ = 22 +/- 0.05 mm.Application: To mount electrodes and work pieces with a shank size of less than 20 mm.To fit blank: Insert and tighten setscrews. If necessary, center with spacer plate FT 01092.

Head offi ce:

Subsidiary in Germany:

Subsidiary in Thailand:

F-Tool International AG • Oberdorf 6 • P.O. Box • CH-5040 Schöftland • Switzerland •Phone +41 (0)62 739 00 30 • Fax +41 (0)62 739 00 39 • E-Mail: info@f-tool.com

F-Tool (Thailand) Co., Ltd. • 12/3 Moo 10 • Klong-Khoi, Pak-Kred • Nonthaburi 11120• Thailand•Phone +66 (0)84 757 66 62-3 • Fax +66 (0)81 838 21 40 • E-Mail: ftoolth@ksc.th.com

F-Tool GmbH • Gewerbepark Breisgau • Freiburger Strasse 19 • DE-79427 Eschbach • Phone +49 (0)7634/504883-0 • Fax +49 (0)7634/504883-15 • E-Mail: info@ftool.de