Final-Version-D-View 6.0 2009 training-publish version(0113112832).ppt

D-View 6.0 Training

Training AgendaSNMP Protocol Overview

Overview of D-View 6.0

Key features

Supported Devices

D-View 6.0 Installation

Hardware requirement / Software requirement

Pre-Installation: Configure SQL server with mix mode.

Install D-View 6.0 (Professional / Standard version)

User Registration / Activate

Introduce D-View6.0 Functions

File Function / View Function / Topology Function / Application Function / System Function / Net Tools Function / Advance Function

D-View6 Module Introduction

Add a Third-Party Device in D-View 6

Access Right Control

D-View6 Data Base Backup & Restore

D-View6 E2ES Plug-In Module

SNMP Protocol

SNMP Introduction

What is SNMP

Simple Network Management Protocol

SNMPv1 (RFC 1213)

SNMPv2 (RFC 1901-1910)

SNMPv2u

SNMPv2*

SNMPv2c

SNMP v3 (RFC 2261-2264)

Use UDP Port 161 (requests/responses),162(notifications)

SNMP is a tool (Layer 7 protocol) that is the application layer protocol used by SNMP agents and managers to send and receive data. Allows for remote and Local management of items on the network including servers, workstations, routers, switches and other managed devices.

SNMP ComponentsSNMP Components

SNMP Manager: An SNMP manager is an application program that contacts an SNMP agent to query or modify the database at the agent, for example, D-View6 NMS.

SNMP Agent:SNMP agent is software that runs on a piece of network equipment (host, router, printer, or others) and that maintains information about its configuration and current state in a database

MIB:Information in the database is described by Management Information Base(MIB), MIB is likes a map of the hierarchical order of all managed objects and how they are accessed.

SNMP Introduction

SNMP Server SNMP Agent

MIB MIB

SNMP MIB

iso(1)

org (3)

dod (6)

internet (1)

mib-2 (1)

system (1) at (3) icmp (5) udp (7) snmp (11)

ipForwDatagrams (6)

directory (1) mgmt (2) experimental (3) private (4)

interface (2) ip (4) tcp (6) egp (8) transmission (10)

. root

SNMP AgentSNMP Server

1.3.6.1.2.1.1(System Information)iso.org.dod.internet.mgmt.mib-2.System

(System Information)

SNMP Message Types

SNMP Manager and Agents using SNMP Protocol to communication each other.

SNMP Manager: Query and Setup agent by agent’s OID.

SNMP Agent: Reply SNMP Manager or send traps to Manager.

Get Request ( UDP 161)

Get Reply

Get Next-Request ( UDP 161)

Get Reply

Set Request ( UDP 161)

Set Reply

Trap (UDP 162)

SNMP Community

Community is a text, and it’s used to define where an SNMP message is destined for, both Server and Agent should be in the same community.

Setup your agents to belong to certain communities.

Setup your management applications to monitor and receive traps from certain community names.

SNMP Community

MIB MIB

Read Community : PublicWrite Community : Private

SNMP Security

SNMP v1 & v2: Use plain text community strings for authentication as plain text without encryption.

SNMPv3:

Authentication with user name by MD5 or SHA message digests.

Authorization with user name or community.

Encryption with DES encryption algorithm.

D-Link D-View6 Network Management Application

D-View 6.0 Overview

Standard Version

Professional Version

Network Management

Configuration Management

Topology Generator / Topology Import & ExportHierarchy Topology ManagerBatch ProgramCheck for Link Capacity, Safeguard, MIB Utility / MIB Browser & ComplierD-View ModuleWeb Configuration

Fault Management

Ping Poll / Ping Poll LogSNMP Poll / SNMP Poll LogTrap Editor / Trap LogEvent Config ManagerEvent Viewer by Netmap or by IP

Performance ManagementPerformance Monitor-Error Ratio, Data DistributionPort Packet Monitor- Utilization, Packet Info

Security Management

SNMP v3 ConfigurationNMS System Access ControlNMS System Function Module Access Right ControlLocal and Radius Authentication Modes when Login

D-View 6.0 Key FeaturesCost-effective, easy-to-use SNMP management software for management

of workgroup/departmental networks

Network topology auto-discovery via Topology Generator

Multiple views to view objects in Ethernet domain by “tree”

Batch Configuration for Firmware Upgrade, Configuration & Safeguard

Engine

Trap and alarm notification by e-mail

Database supporting Microsoft SQL Server 2000/2005 and Microsoft Access formats

Modules supported by D-View 6.0

D-Link Switch:

• DES-1228, DES-1252, DES-3028, DES-3028P, DES-3052, DES-3052P,

DES3250TG, DES-3526, DES-3528, DES-3550, DES-3828, DES-3828P,

DES-3828DC, DES-6500, DES-7206, DES-7210, DGS-3048, DGS-3100-24,

DGS-3100-24P, DGS-3100-48, DGS-3100-48P, DGS-3200-10, DGS-3200-16,

DGS-3308FG, DGS-3324SR, DGS-3426, DGS-3426P,DGS-3427, DGS-3450,

DGS-3612, DGS-3612G, DGS3627, DGS-3627G, DGS-3650, DPF-500,

DXS-3326GSR, DXS-3350SR

D-Link Wireless AP:

• DWL-2100 AP, DWL-2700 AP, DWL-3200 AP, DWL-3260 AP, DWL-7100 AP,

DWL-7700 AP, DWL-8200 AP,

D-Link Firewall (No support traps)

• DFL-1600, DFL-1610, DFL-1660, DFL-210, DFL-2500, DFL-2510, DFL-2510F,

DFL-2560, DFL-2560F, DFL-260, DFL-800, DFL-860

D-View 6.0 Installation

D-View6 Standard Version

Hardware• CPU: 1.4 GHz or above

• DRAM: 1 GB or above

• Hard drive available space: 200MB

• Ethernet adapter

Software• Operating System

• Windows XP, Windows 2000 Server or Advanced Server (English Version), Windows 2003 (English Version)

• For better UI display, it is recommended to configure the screen resolution on the management workstation at 1024 x 768.

• Microsoft Internet Explorer 6 with Service Pack 1 or later

How to install D-View6 Standard• Just press “Next” for several times and D-View 6.0 will be installed automatically.

D-View6 Professional Version

Hardware• CPU: 1.4 GHz or above

• DRAM: 1 GB or above

• Hard drive available space: 200MB

• Ethernet adapter

Software• Operating System

• Windows Server 2000 SP4 or Server 2003 SP2(English Version) • For better UI display, it is recommended to configure the screen resolution on the

management workstation at 1024 x 768.• DBMS

• Microsoft SQL Server 2000 with Service Pack 3 (D-View 6.0 for SQL-Server 2000)• Microsoft SQL Server 2005

• Microsoft Internet Explorer 6 with Service Pack 1 or later

How To Install D-View6 Professional:• Step 1: Install Microsoft SQL Server 2000 sp3 or Server 2005 version, and during the installation:

• Select “Entire features will be installed on local hard disk” .

• Ensure the authentication mode on MS SQL Server is Mixed Mode.

How To Install D-View6 Professional:• Step 2: Setup SQL Server parameters:

• Configure TCP/IP function in the Protocols for SQLEXPRESS.

How To Install D-View6 Professional:• Step 3: Setup SQL Server parameters:

• Configure TCP/IP function in the Protocols for SQLEXPRESS.

How To Install D-View6 Professional:• Configure TCP/IP function in the Client Protocols.

How To Install D-View6 Professional:• Add a new Alias in the Aliases function.

How To Install D-View6 Professional:• Step4: Restart OS.• Step5: Check the activate connection.

How To Install D-View6 Professional:• Step6: Configure the hosts.txt file

• Go to C:\WINDOWS\system32\drivers\etc\hosts• Add a SQL-Server as following:

How To Install D-View6 Professional:• Step7: Restart OS.• Step8: Install D-View6 Professional Application

• Step9: Install Make DB Application

• Step10: Restart OS

User Registration

Registration for activate

Step 1. Go to http://dview.dlink.com.tw/ to register.

Registration for activate

Step 2. Register your MAC address of the Server with your CD-Key to generate activation code.

Step 3. One CD-Key can generates 5 activation codes.* CD-Key is not used for activate software, only for registration.

* Activate code is for launch D-View 6.0 software.

Activation Wizard

At the every first time the user runs D-View 6.0, the Activation Wizard will be launched to guide the user complete the activation procedure.

Without the license activation, by default D-View 6.0 is 30-Days Trial version.

Activation Wizard

Change to “formal” version from 30-Day Trial version.

Start D-View6

How to Login D-View 6.0 NMS

Launch D-View via double clicking the D-View icon.

Log on D-View NMS platform by providing the following:

Account: admin

Default Password: 111111

Note: Modify the default password of “Admin” via the Menu Bar > System > Change Password after you log on D-View NMS platform.

Setup Wizard

While the user initializes D-View 6.0, the Startup Wizard will be launched to guide the service complete the initial configuration.

Setup Wizard Helps You :To create a Domain for management

To create a Netmap for management

To perform Topology Auto-Discovery

To export the generated topology to the NMS platform

Ready for Polling and Monitoring or any further operations

Main Window

Domain

Netmaps

Main MenuMain Tool BarTopology Tool Bar

TopologyView

Window

MessageBoard

Building a topology in D-View 6.0

Step1: Enable DFL-1600/ DGS-3200-10/ DES-3526 SNMP feature.

Step2: Setup D-View6

• Create a Domain

• Create Netmaps

• Add Devices

Lan2: 11.3.3.254/24

11.3.3.253/24GW : 11.3.3.254

DFL-1600

DGS-3200-10

DES-3528

11.3.3.100/24GW : 11.3.3.254

192.168.1.3/24GW : 192.168.1.1

Lan1 : 192.168.1.1/24

192.168.1.2/24 GW : 192.168.1.1

DES-3526

DGS-3200-10

D-view 6 192.168.1.150/24GW : 192.168.1.1

• Create a Domain

• Create a NetMap

• Add Device By Manual

• Add Device By Topology Generator

Introduce D-View6.0 Functions

File Function

Save the current topology.

The wizard guides you to create a topology.

Close the current Topology View window.

Print the current topology.

Preview the current topology.

Set printer options, properties and paper size.

Locks D-View.

Logout of D-View and sign in as a different user. Exit D-View.

View Function

Topology Function

Display Device Information.

Display link port or speed. Display View Options.

Select or Add A Device.

Select or Add A Link. Select or Add A Netmap. Zoom In your topology. Zoom Out your topology.

Auto adjust your topology.

Recover In your topology.

Set your topology Background Color.

Topology Function

Application Function

Execute a sequence of operations in D-View. . Topology Save or Restore. Add, modify and delete devices.

Application Function – Batch Config

Batch configuration provides following feature for management easily.

Save Device Configuration To Flash Memory

Reboot Device

Firmware Upgrade

Port State

Configuration File Manager

1 Select Devices

• Save Device Configuration To Flash Memory

• Reboot Device

2 Check “Select” item

3 Select memory for device configuration

3 Design how to reboot device, for example: cold-start or warm start.

1 Select Devices

2 Check “Select” item

1 Select Devices

• Firmware Upgrade2 Check “Select” item

3 Setup all require options, including File name, TFTP Server IP, Operation Type, Procedure and Image.

• Port State

1 Select Devices 2 Port Status

• Configuration File Manager

1 Select Devices

2 Click Select Check Box

3 Setup TFTP Server IP Address

Use Batch_Config To Upgrade Firmware

System Function

Store logged events. Manage domain information.

Monitor and manage events. Locate devices using IP or MAC address.

Configure the root domain name, management and authentication. Create user groups and provide access rights for an administrator.

Change password after login.

System Function – Domain Manager

Setup a domain name

System Function – Event Viewer

Setup conditions

Select a Netmap

System Function – Event Viewer

Specific a IP address

System Function – Polling Config

Current used polling

protocol

System Function – Device Event Config

Select Netmap

Select Device

Select Event

Select Severity

Enalbe Email Alarm Function

Setup Mail Server

System Function – Device Event Config

Setup User Name

E-Mail address

Select Authority

Setup User Account

Setup User Password

E-Mail Server AddressSetup SMTP Port

System Function – Trap Editor

Select a MIB Object

Setup a self defined Number

Setup the self defined

description

System Function – Trap Editer

NetTools Function

Search devices using IP address.

Lists all the intermediate routers a connection must pass through its destination.

Upload/Download/Update configuration files to and from devices. Manage devices through Telnet, Web and Ping using the IP address.

Monitor the port packet performance.

Monitor the RMON performance of a device. Manage and configure non D-Link devices.

Tool to generate a Topology.

NetTools Function – Device Descovery

Select a IP range

Setup Community

Setup Device Type

Discovered Device

NetTools Function – Net Toolbox

NetTools Function – Port Packet Monitor

Select Port

Packet Status

Packet StatusChart

Packet Status function

NetTools Function – Port Packet Monitor

Port Status

Port Status Chart

Select Port

Port Status function

NetTools Function – Performance Monitor

Select Port

Packet Size Distribution

Packet Size Distribution function

NetTools Function – Performance Monitor

Error Ratio

Error Ratio Chart

Select Port

Packet Size Distribution function

NetTools Function – MIB Tools

Select Compile Button

Select a MIB

NetTools Function – Topology Generator

Start Scan Screen

Select Scan Mode

Setup community

Setup topology name

Scan Status

Auto Generated Topology

Select Scan Mode

Setup topology name Setup

community

Setup a IP Range

Auto Generated Topology

Advance Function

Monitor and modify the link status.

Check the network for new and updated devices.

Check the safeguard status of devices.

Retrieve ARP information from devices in the topology.

Check and modify SNMP and Syslog UDP port.

Advance Function

D-View6 Module

D-View6 Module• D-View Module is a graphic interface.

• Provide a easy way to monitor and configure D-Link devices.

• Provide a real-time devices state information.

How To Install D-View6 Module• Go to PMD System and download D-View6 Module for specific D-Link devices.

• Install D-View6 module Application.

How To Use D-View6 Module• Just double click device icon from the topology view window.

D-View Module

Double click a device

D-View6 Module

Install & Use D-View6 Module

How To Add a Third-Party Device

Add third-party devices into DView6

MIB Browser• Use MIB Browser to check the MIBs of third-party devices.

Device Customization• Add OID of third-party devices into D-View 6.0.

RFC-1213 MIB• RFC-1213 MIB is a standard MIB, provides basic device status.

Steps:1.Use MIB Browser to query the OID of RFC-1213 from the third-party device.

2.Add OIDs into D-View 6.0 through Device Customization.

3.Regenerate topology again, the new third-party device can be identified as user demand.

MIB Browser

Select the RFC1213-MIB

Find out the RFC1213-MIB

Object ID

Device Customization

Function

Setup essential parameters

Add a Cisco 2621 Router in D-View6

wan1 Lan1 : 192.168.1.1/24

Lan2: 11.3.3.254/24

11.3.3.253/24GW : 11.3.3.254

DMZ: 10.3.3.254/24 DFL-1600

DGS-3200-10

DES-352611.3.3.100/24GW : 11.3.3.254

Cisco 262110.3.3.100/24

GW: 10.3.3.254

Add a Cisco 2621 Router in D-View6

Port 10

D-view 6 192.168.1.150/24GW : 192.168.1.1

192.168.1.2/24 GW : 192.168.1.1DES-3526

192.168.1.3/24GW : 192.168.1.1DGS-3200-10

Administrator Manager

Select a Administrator

Account

Setup the permission

Backup And Restore D-View6 Database

Backup And Restore Current D-View6 Database

BackupCopy below files and folders: • D-Link\D-Link SNMP Solutions\smidb.mdb

• D-Link\D-View\dvision3.mdb

• D-Link\Mibsolution\MIB\*.*

• D-Link\Mibsolution\SMIDB\*.*

• D-Link\Mibsolution\smidb.mdb

• D-Link\D-View\delconfig\*.*

• D-Link\D-View\perconfig\*.*

• System32\perconfig\*.*

Restore:• Recover above files and folders.

For Professional Version:• Install "SQL Server Management Studio Express" program, you can download

it via microsoft web site.

• Enable manager.

Windows Authentication

Server Type

Server Name

Server Auth

For Professional Version:• Backup DVision3 Database.

For Professional Version:• Or recovery DVision3 Database.

For Professional Version:• Backup or Recovery Dvision Temp Database by above procedures.

database database

For Professional Version:• Check Backup files.

D-View6 E2ES Module

E2ES Console Plug-In Module•End-To-End-Security Console Plug-In Module.•A new D-View6 plug-in module, now published Beta-1 version.•E2ES Module stand for D-Link switch security solution, Beta 1 version

including :•802.1x•WAC•MAC•Guest_VLAN•Traffic Segmentation•ACL Manager•Port Security• IMPB•Broadcast Storm Control

•Any feedback from you are welcome• For function suggestions, pls. contact peter_chan@dlink.com.tw

E2ES Console Plug-In Module•Supported devices list:

IP-MAC-Port Binding (IMPB) DES-3028 DES-3528 DES-3526 DES-3828

DGS-3650 DGS-3426 DGS-3200-10

802.1X Authentication DES-3028 DES-3528 DES-3526 DES-3828

DGS-3650 DGS-3426 DGS-3200-10

Broadcast Storm Control DES-3028 DES-3528 DES-3526 DES-3828

DGS-3650 DGS-3426 DGS-3200-10

Guest VLAN DES-3528 DES-3526 DES-3828

DGS-3650 DGS-3200-10

Web-Based Access Control (WAC) DES-3528 DES-3828

DGS-3650 DGS-3200-10

MAC-Based Access Control (MAC) DES-3528 DES-3828

DGS-3426 DGS-3200-10

Port Security DES-3028 DES-3526 DES-3528 DES-3828

DGS-3426 DGS-3650 DGS-3200-10

Traffic Segmentation DES-3028 DES-3526 DES-3528 DES-3828

DGS-3426 DGS-3650 DGS-3200-10

Access Control List (ACL) DES-3028 DES-3526 DES-3528 DES-3828

DGS-3426 DGS-3650 DGS-3200-10

E2ES Console Plug-In Module• Install Example:

• D-View 6 platform must be installed before installing E2ES Console Plug-In Please download the latest D-View 6 version on PMD:

TOP＞ Product Data＞ Switch＞ Switch＞ D-VIEW6＞ Firmware • E2ES Console beta code files

• E2ESConsoleB01(STD).exe: to work with D-View 6 Standard Edition• E2ESConsoleB01(PRO).exe: to work with D-View 6 Professional

Edition• Click “Finish” when installation completed

E2ES Console Plug-In Module• Three ways to launch IMPB

• Wizard Portal• Quick Menu: click on the device icon and right click• Function Menu:

Plug-In > E2ES Console Plug-In > IMPB

< Function Menu >

< Quick Menu >

< Wizard Portal>

Configuration Example – Port Security• This section demonstrates Port Security configuration for DGS-3200

• Purpose• Know how to configure Port Security on E2ES Console Plug-In by following

the step-by-step procedures• Be able to demonstrate it to the customers with these steps

• This configuration sample is for DGS-3200

Configuration Port Security• Step1: Start E2ES Port Security Function.

Configuration Port Security• Step2: Select Netmap & Device.

Select a Netmap

Select a device

Configuration Port Security• Step3: Select Parameters.

Select a Device

Enable or Disable Port Security

Trap/Log

Select a port range

Enable/Disable Admin State

Setup maximum learning MAC

address

Select Lock Mode

Press Update to update changes

Configuration Port Security• Step4: Apply changes to switch configuration.

Modified changes

Apply changes to switch

Configuration Port Security• Step5: Check Switch Port Security function status.

Issue the “show

port_security” command to

check the port security status

Port 1~5 has been enabled port security

function

Thank You

Final-Version-D-View 6.0 2009 training-publish version(0113112832).ppt

Documents

Elluminate Publish! Version 2

Remote Desktop Manager (Version 6.0) - Devolutions inc

How to Use E-triloquist Version 6.0

IES Tutorial ModelIT (Version 6.0) · PDF fileIES Tutorial ModelIT (Version 6.0) 2 Introduction: ModelIT Tutorial ... the following dialogue box appears

Version 6.0 Student Login

MapuSoft Technologies 1.3.6 Release Notes build 2.6 x86 LynxOS make Version 5.0 x86 Version 6.0 x86 MQX N/A N/A N/A NetBSD make Version 6.0 x86 Nucleus Visual Studio 6.0 Version 1.1.13

Self Compensating Electronic Edge Finder, version 6.0

ZSK Stickmaschinen GmbH EPCwin Version 6.0 EPCWIN · ZSK Stickmaschinen GmbH EPCwin Version 6.0 © (ZSK Stickmaschinen GmbH 2016) 3 Version 6.0 (06/2016)

Sage ERP Accpac Version 6.0

Asean stability guideline (version 6.0)

Instalasi Visual Basic 6.0 1. Ekstrak VB 6.0 Proffesional full version

Installation Notes MC-CAT Version 6.0

Uhc Tufts Blurring V3 Publish Version

Publish version, verändertes Format

Dead Or Alive: Anniemon Style - Version 6.0

Panel 800 Version 6, Panel Builder, Programming and Installation · PDF filePanel Builder Programming and Installation Version 6.0-1. Panel 800 Version 6 - Panel Builder Version 6.0-1

Version 6.0 Cutler Hammer Advanced Graphics Featuring…

2011 JHC Strategic Plan to Publish Final Version

IP Version 6.0

3E Online Version 6.0 Training Presentation