FUEL DISPENSING SSTEMS SE-47 Component Details …...Dispense Diesel Fuel, Gasoline, Grease Kerosene...

Component Details

FUEL DISPENSINGSYSTEMS

Unmatched Quality & Service Proudly made in America

SE-47120V AC - 18 GPMMetered Tank-top Pump,Remote Dispensing System

120V AC Electric Pump - 1-1/4" Inlet - 1" Outlet3-Wheel Mechanical Meter in Cabinet1” Automatic Nozzle, Swivel & Hose40 GPM Particulate Filter - 30 Micron2 - Emergency Vents - MNPT - 16 ozPop-up Leak GaugeSwing-arm or Clock Level Gauge

Overfill Prevention ValveAtmospheric Vent with PipeDrop Tube - Pump Suction Pipe - 3’ LiftSpill Bowl or Remote Fill

Minimum tank diameter 64”

Unmatched Quality & Service

SE-47 - System Component120V AC Electric Pump - 1-1/4" Inlet - 1" Outlet

5/28/2015 115V AC Pump for use with AST Remote Dispensers

http://www.fillrite.com/index.cfm/products/productdetail/?p=135&ps=83 1/4

115V AC Pump for use with AST Remote Dispensers

Model: FR713VThis Heavy­Duty, positive displacement pump delivers up to 18 GPM (114 LPM) and is designed with Fill­Rite's exclusive anti­siphon safety feature. The motor is explosion­proof UL/cUL listed and has sealedbearings, a heavy­duty switch and thermal overload protection. The system is UL/cUL listed as well. Forflexible and convenient applications, combine above ground pumps with Series 902 cabinet meters.

Features & Benefits

20 GPM (76 LPM)1/3 HP motorUL/cUL listed pump and motorHeavy duty cast iron constructionDiesel, gasoline,. kerosene, E15, biodiesel up to B202 year warranty2 in. threaded base for tank mounting

Documents

(/)

Unmatched Quality & Service

SE-47 - System Component4-Wheel Mechanical Meter in Cabinet

5/28/2015 FR902CRU

http://www.fillrite.com/index.cfm/products/productdetail/?p=202&ps=97 1/4

FR902CRU

Model: FR902CRUFill­Rite's FR902C model meter cabinets are constructed from heavy duty 15­guage steel and are powdercoated to stand up to the harshest environments. Hood removal is quick and simple; remove three screwsand the reset knob and you have access. The cabinet is pulser­ready and all external wiring connectionsare placed in easy access locations.

Features & Benefits

6 ­ 40 gpm1 inlet / 1 outlet4 digit mechanical gallon meterUL / cUL certificationFor use with remote pumpsCan be used with submersible pumpsReplaces model FR902RU

Documents

(/)

5/28/2015 FR902CRU

http://www.fillrite.com/index.cfm/products/productdetail/?p=202&ps=97 1/4

FR902CRU

Model: FR902CRUFill­Rite's FR902C model meter cabinets are constructed from heavy duty 15­guage steel and are powdercoated to stand up to the harshest environments. Hood removal is quick and simple; remove three screwsand the reset knob and you have access. The cabinet is pulser­ready and all external wiring connectionsare placed in easy access locations.

Features & Benefits

6 ­ 40 gpm1 inlet / 1 outlet4 digit mechanical gallon meterUL / cUL certificationFor use with remote pumpsCan be used with submersible pumpsReplaces model FR902RU

Documents

(/)

Unmatched Quality & Service

SE-47 - System Component1" Automatic Nozzle, Swivel & Hose, Gas & Diesel

6/1/2015 1 in Ultra Hi-Flow Nozzle

http://www.fillrite.com/index.cfm/products/productdetail/?p=299&ps=120 1/4

1 in Ultra Hi-Flow Nozzle

Model: N100DAU13Fill a 200 gallon tank in less than 7 minutes. That's real time saved...every time you fill the tank. Industryleading flow isn't the only reward you will reap. The patent pending UL listed Ultra Hi­Flow nozzle takes fueltransfer to a new level. For transfer of gasoline, diesel, or kerosene to large fuel capacity farm, fleet, orconstruction equipment, there is simply no better choice.

Fueling has never been easier...or quicker. Don't let your nozzle slow up your work when it is mostcritical. At Fill­Rite, we understand that time is money.

Features & Benefits

UL listed for gasoline, diesel and kerosene1 in NPT­F inlet, 1 1/8 in OD spoutThree­position latch for automatic flow at 30, 24 and 8 GPMAngled outlet to minimize hose wear50 PSI working pressureHeavy duty hanging hook compatible with all Fill­Rite products

(/)

6/1/2015 1 in Ultra Hi-Flow Nozzle

http://www.fillrite.com/index.cfm/products/productdetail/?p=390&ps=120 1/4

1 in Ultra Hi-Flow Nozzle

Model: N100DAU13GFill a 200 gallon tank in less than 7 minutes. That's real time saved...every time you fill the tank. Industryleading flow isn't the only reward you will reap. The patent pending UL listed Ultra Hi­Flow nozzle takes fueltransfer to a new level. For transfer of gasoline, diesel, or kerosene to large fuel capacity farm, fleet, orconstruction equipment, there is simply no better choice.

Fueling has never been easier...or quicker. Don't let your nozzle slow up your work when it is mostcritical. At Fill­Rite, we understand that time is money.

Features & Benefits

UL listed for gasoline, diesel and kerosene1 in NPT­F inlet, 1 1/8 in OD spoutThree­position latch for automatic flow at 30, 24 and 8 GPMAngled outlet to minimize hose wear50 PSI working pressureHeavy duty hanging hook compatible with all Fill­Rite products

(/)

6/1/2015 1 in Ultra Hi-Flow Nozzle

http://www.fillrite.com/index.cfm/products/productdetail/?p=299&ps=120 1/4

1 in Ultra Hi-Flow Nozzle

Model: N100DAU13Fill a 200 gallon tank in less than 7 minutes. That's real time saved...every time you fill the tank. Industryleading flow isn't the only reward you will reap. The patent pending UL listed Ultra Hi­Flow nozzle takes fueltransfer to a new level. For transfer of gasoline, diesel, or kerosene to large fuel capacity farm, fleet, orconstruction equipment, there is simply no better choice.

Fueling has never been easier...or quicker. Don't let your nozzle slow up your work when it is mostcritical. At Fill­Rite, we understand that time is money.

Features & Benefits

UL listed for gasoline, diesel and kerosene1 in NPT­F inlet, 1 1/8 in OD spoutThree­position latch for automatic flow at 30, 24 and 8 GPMAngled outlet to minimize hose wear50 PSI working pressureHeavy duty hanging hook compatible with all Fill­Rite products

(/)

6/1/2015 1 in Ultra Hi-Flow Nozzle

http://www.fillrite.com/index.cfm/products/productdetail/?p=390&ps=120 2/4

Automatic shut­offConvenient one­finger hold­open clip to set flow rateRated to ­20 Fahrenheit operationInsulated hand grip to minimize hot and cold handlingMinimal spray pattern to reduce foaming and false shut offsLarge spout spring to hold nozzle in placeViton seals and o­rings for smooth valve operationPatent pendingMade in USA

No Documents Available

Documents

6/1/2015 1 in Ultra Hi-Flow Nozzle

http://www.fillrite.com/index.cfm/products/productdetail/?p=390&ps=120 1/4

1 in Ultra Hi-Flow Nozzle

Model: N100DAU13GFill a 200 gallon tank in less than 7 minutes. That's real time saved...every time you fill the tank. Industryleading flow isn't the only reward you will reap. The patent pending UL listed Ultra Hi­Flow nozzle takes fueltransfer to a new level. For transfer of gasoline, diesel, or kerosene to large fuel capacity farm, fleet, orconstruction equipment, there is simply no better choice.

Fueling has never been easier...or quicker. Don't let your nozzle slow up your work when it is mostcritical. At Fill­Rite, we understand that time is money.

Features & Benefits

UL listed for gasoline, diesel and kerosene1 in NPT­F inlet, 1 1/8 in OD spoutThree­position latch for automatic flow at 30, 24 and 8 GPMAngled outlet to minimize hose wear50 PSI working pressureHeavy duty hanging hook compatible with all Fill­Rite products

(/)

Unmatched Quality & Service

SE-47 - System Component1" Swivel & Hose

5/28/2015 1 in Multi-Plane Swivel

http://www.fillrite.com/index.cfm/products/productdetail/?p=301&ps=121 1/4

1 in Multi-Plane Swivel

Model: S100H1315Multi­Plane, Full 360° spherical rotation for easy movement of the nozzle.

Features & BenefitsDouble O­ring Seals at each Swivel Provide Long Life at Low Temps (­40° F/C)Compatible with Unleaded Gasoline, Diesel & Ethanol Blends through E10

EnglishMulti­Plane Swivel Product Announcement (http://www.fillrite.com/ProductCatalog/1468.pdf)

Documents

(/)

5/28/2015 3/4 in x 12 ft Retail Hose

http://www.fillrite.com/index.cfm/products/productdetail/?p=281&ps=119 1/4

3/4 in x 12 ft Retail Hose

Model: FRH07512Dispense Diesel Fuel, Gasoline, Grease Kerosene and Petroleum Oils. The Fill­Rite hose is a blend ofNitrile and PVC external materials ­ provides rugged protection against cuts, abrasions, snags. PunctureResistant.

Features & Benefits

3/4 x 12' fuel transfer hoseDispense diesel fuel, gasoline, kerosene, and petroleum oilsNeoprene exteriorDesigned for use with all electric pumps High quality Nitrile inner tube

(/)

5/28/2015 1 in x 12 ft Retail Hose

http://www.fillrite.com/index.cfm/products/productdetail/?p=284&ps=119 1/4

1 in x 12 ft Retail Hose

Model: FRH10012Information coming soon

Features & BenefitsDispense diesel fuel, gasoline, kerosene, and petroleum oilsNeoprene exteriorDesigned for use with all electric pumpsHigh quality Nitrile inner tube

No Documents Available

Documents

(/)

5/28/2015 1 in Multi-Plane Swivel

http://www.fillrite.com/index.cfm/products/productdetail/?p=301&ps=121 1/4

1 in Multi-Plane Swivel

Model: S100H1315Multi­Plane, Full 360° spherical rotation for easy movement of the nozzle.

Features & BenefitsDouble O­ring Seals at each Swivel Provide Long Life at Low Temps (­40° F/C)Compatible with Unleaded Gasoline, Diesel & Ethanol Blends through E10

EnglishMulti­Plane Swivel Product Announcement (http://www.fillrite.com/ProductCatalog/1468.pdf)

Documents

(/)

5/28/2015 1 in x 12 ft Retail Hose

http://www.fillrite.com/index.cfm/products/productdetail/?p=284&ps=119 1/4

1 in x 12 ft Retail Hose

Model: FRH10012Information coming soon

Features & BenefitsDispense diesel fuel, gasoline, kerosene, and petroleum oilsNeoprene exteriorDesigned for use with all electric pumpsHigh quality Nitrile inner tube

No Documents Available

Documents

(/)

Unmatched Quality & Service

SE-47 - System Component40 GPM Particulate Filter - 30 Micron & Filter Head

5/28/2015 40 GPM Particulate Spin on Filter - 30 Micron

http://www.fillrite.com/index.cfm/products/productdetail/?p=307&ps=122 1/4

40 GPM Particulate Spin on Filter - 30 Micron

Model: F4030PM0Particulate Fuel Dispenser Filter is designed with resin­impregnated cellulose media for the removal of dirt,rust and microbes.

Features & Benefits30 Micron Filter50 psi40 gpm1 1/2­16Compatible with gasoline, diesel, ethanol blends up to 15% and ultra­low sulfur diesel

No Documents Available

Documents

(/)

5/28/2015 40 GPM Particulate Spin on Filter - 30 Micron

http://www.fillrite.com/index.cfm/products/productdetail/?p=307&ps=122 1/4

40 GPM Particulate Spin on Filter - 30 Micron

Model: F4030PM0Particulate Fuel Dispenser Filter is designed with resin­impregnated cellulose media for the removal of dirt,rust and microbes.

Features & Benefits30 Micron Filter50 psi40 gpm1 1/2­16Compatible with gasoline, diesel, ethanol blends up to 15% and ultra­low sulfur diesel

No Documents Available

Documents

(/)

Unmatched Quality & Service

SE-47 - System ComponentEmergency Vents - MNPT - 16 oz

The Fig. 244 Emergency Vent (pressure relief only) Series is used on aboveground storage tanks, as a code requirement, to help prevent the tank from becoming over-pressurized and possibly rupturing if ever exposed to fi re. The vent must be used in conjunction with a “normal vent”. Correct application of this vent requires proper vent size and selection for the tank system in order to meet the specifi c venting capacity requirements.The new design increases protection against weather, improves manufacturability and helps limit and control dust accumulation.

Code ComplianceAPI 2000; International Fire Code; National Fire Code of Canada; NFPA 1, 30, 30A, 31, 37, 110; PEI RP200;PEI RP800; Underwriters Laboratories Inc. UL-142, UL-2085, UL- 2244; Underwriters Laboratories of Canada CAN/ULC S601-07, CAN/ULC S602-07, CAN/ULC S652-08.California Air Resource Board (CARB) Phase 1 Enhanced Vapor Recovery (EVR) AST Certifi ed Products (VR-402-B)

Additional ReferencesNFPA 30, UL 142, Morrison Venting Guide

Model 244 Emergency Vents | 4-inchSPECIFICATION SHEET

570 E. 7th Street, P.O. Box 238 | Dubuque, IA 52004-0238t. 563.583.5701 | 800.553.4840 | f. 563.583.5028

www.morbros.com

WARNING: DO NOT FILL OR UNLOAD FUEL FROM A STORAGE TANK UNLESS IT IS CERTAIN THAT THE TANK VENTS WILL OPERATE PROPERLY. Morrison tank vents are designed only for use on shop fabricated atmospheric tanks which have been built and tested in accordance with UL 142, NFPA 30 & 30A, and API 650 and in accordance with all applicable local, state, and federal laws. In normal operation, dust and debris can accumulate in vent openings and block air passages. Certain atmospheric conditions such as a sudden drop in temperature, below freezing temperatures, and freezing rain can cause moisture to enter the vent and freeze which can restrict internal movement of vent mechanisms and block air passages. All storage tank vent air passages must be completely free of restriction and all vent mechanisms must have free movement in order to insure proper operation. Any restriction of airfl ow can cause excessive pressure or vacuum to build up in the storage tank, which can result in structural damage to the tank, fuel spillage, property damage, fi re, injury, and death. Monthly inspection, and immediate inspection during freezing conditions, by someone familiar with the proper operation of storage tank vents, is required to insure venting devices are functioning properly before fi lling or unloading a tank.

Fig. 244OF

Fig. 244OM

E RV

UL Listed Emergency vent (pressure relief only) used on aboveground storage tanks, as a code requirement, to help prevent the tank from becoming over-pressurized and possibly rupturing if ever exposed to fire.

Emergency vents must be used in conjunction with a “normal vent.” Correct application of this vent requires proper vent size and selection for the tank system in order to meet the specific venting capacity.

Code Compliance:API 2000International Fire CodeNational Fire Code of CanadaNFPA 1, 30, 30A, 31, 37, 110PEI RP200 & PEI RP800Underwriters Laboratories Inc. - UL-142, UL-2085 & UL- 2244Underwriters Laboratories of Canada - CAN/ULC S601-07, CAN/ULC S602-07 & CAN/ULC S652-08California Air Resource Board (CARB) Phase 1 Enhanced Vapor Recovery (EVR) AST Certified Products (VR-402-B)

WARNING: DO NOT FILL OR UNLOAD FUEL FROM A STORAGE TANK UNLESS IT IS CERTAIN THAT THE TANK VENTS WILL OPERATE PROPERLY. Emergency vents are designed only for use on shop fabricated atmospheric tanks which have been built and tested in accordance with UL 142, NFPA 30 & 30A, and API 650 and in accordance with all applicable local, state, and federal laws. In normal operation, dust and debris can accumulate in vent openings and block air passages. Certain atmospheric conditions such as a sudden drop in temperature,below freezing temperatures, and freezing rain can cause moisture to enter the vent and freeze which can restrict internal movement of vent mechanisms and block air passages. All storage tank vent air passages must be completely free of restriction and all vent mechanisms must have free movement in order to insure proper operation. Any restriction of airfl ow can cause excessive pressure or vacuum to build up in the storagetank, which can result in structural damage to the tank, fuel spillage, property damage, fire, injury, and death. Monthly inspection, and immediate inspection during freezing conditions, by someone familiar with the proper operation of storage tank vents, is required to insure venting devices are functioning properly before filling or unloading a tank.

Unmatched Quality & Service

SE-47 - System ComponentLeak Gauge - Pop-Up for tanks 96" diameter and smaller The Leak Gauge—Type K

Calibration: Consists of 3 pieces. Outer plastic piece, inner plastic piece, and a piece of paper in between.

Red Lock Nut: HDPE Plastic.

Bushing: Aluminum bushing, can be 2” or 1.5”.

Float: HDPE Plastic

Internal Rods: Standard construction is aluminum rods.

Additional Options - Not included:

Audible Alarm Accessory: This add on feature can turn your mechanical gauge into an audible Hi or Lo level alarm. Gauge Guard: A cover that protects the exposed plastic components on top of the gauge.

Krueger Sentry Gauge 1873 Siesta Lane

Green Bay, WI 54313

www.ksentry.com

Contact us for more info: Ph: 920-434-8860 Fax: 920-434-8897

Email: info@ksentry.com

Instructions for Operation: This gauge is a simple visual tool. If the red indicator rises into the viewing window, it is indicating that there is a leak occurring in your double wall containment system. Once installed, you simply view the calibration to monitor your interstitial space. The indicator is not calibrated. It simply indicates leak or no leak.

What it is:

Top mounted liquid leak gauge that can measure from 6 inches to 170 inches in depth. Bushing size can be 2” or 1.5”. Gauges are custom made in house to fit your tank. This gauge is designed to monitor either the interstitial space of a double wall containment system, or it can mount into an external monitoring pipe.

Leak Union: Compression union

®

®

Environmental Protection

The Leak gauge is officially approved for use in double wall containment systems by several state environmental protection agencies. Florida DEP Michigan DEP Approval Letters can be found on the Leak Gauge page of our website.

Top mounted liquid leak gauge that can measure from 6" to 170" in depth. Gauges are custom made in house to fit your tank. This gauge is designed to monitor either the interstitial space of a double wall containment system, or it can mount into an external monitoring pipe.

This gauge is a simple visual tool. If the red indicator rises into the viewing window, it is indicating that there is a leak occurring in the double wall containment system.

Once installed, simply view the calibration to monitor the interstitial space. The indicator is not calibrated. It simply indicates leak or no leak.

Additional Options

Audible Alarm Accessory: This feature can turn themechanical gauge into an audible Hi or Lo level alarm.

Gauge Guard: A cover that protects the exposed plas-tic components on top of the gauge.

Environmental Protection

The Leak gauge is officially approved for use in double wall containment systems by several state environmental protection agencies.

Unmatched Quality & Service

SE-47 - System ComponentLeak Gauge - Electronic for 120" diameter tanks

Engineering Bulletin

Unmatched Quality & Service

SE-47 - System ComponentLevel Gauge - Swing Arm for tanks 64" diameter and smaller

Direct Reading Gauge—Type D

Calibration: Consists of 3 pieces. Outer plastic piece, inner plastic piece, and a piece of paper in between.

Red Lock Nut: HDPE Plastic.

Bushing: Aluminum bushing, can be 2” or 1.5”.

HDPE Float: High Density Polyethylene Plastic.

Internal Rods: Standard construction is galvanized steel rods with brass rivets.

What it is:

Top mounted liquid level gauge that can measure from 6 inches to 144 inches in depth. Bushing size can be 2”, 1.5”, or .75”. Gauges are custom made in house to fit your tank. Can also accommodate for double walls and pipe risers.

Additional Options - Not included:

Audible Alarm Accessory: This add on feature can turn your mechanical gauge into an audible Hi or Lo level alarm. LED At-A-Glance Accessory: Another add on feature. This can give your mechanical gauge remote reading capability. Gauge Guard: A cover that protects the exposed plastic components on top of the gauge.

Replacement Parts - D-Kit - Replaces all of the gauge components from the red lock nut and up. Includes: Red HDPE Plastic Nut, Duro Nitrile Gasket, Plastic Cellulose acetate inner and outer calibration. DG-Kit-ALN - Replaces all of the gauge components from the red lock nut and up with upgraded parts. Includes: Aluminum Lock Nut, Duro Nitrile Gasket, Plastic Cellulose acetate outer calibration, Glass inner calibration.

Krueger Sentry Gauge 1873 Siesta Lane

Green Bay, WI 54313

www.ksentry.com

Contact us for more info: Ph: 920-434-8860 Fax: 920-434-8897

Email: info@ksentry.com

Instructions for Operation: This gauge is a simple volume reading tool. The top of the red indicator is an indication of your approximate fuel level in your tank. Once installed, you simply view the calibration to monitor your tank level. Indicator is calibrated in eighths of a tank on one side, and quarters of a tank on the other.

®

®

Part Number— D-(size opening)-(tank depth)+(ext)-(list options) Sample—D-2-48+12

Top mounted liquid level gauge that can measure from 6" to 170” in depth. This gauge is a simple volume reading tool. The top of the red indicator is an indication of approximate fuel level in the tank. Once installed, simply view the calibration to monitor tank level.

Indicator is calibrated in eighths of a tank on one side, and quarters of a tank on the other.

Gauges are custom made in house to fit your tank. Can also accommodate for double walls and pipe risers.

Additional Options

Audible Alarm Accessory: This feature can turn the mechanical gauge into an audible Hi or Lo level alarm.

LED At-A-Glance Accessory: This feature can give mechanical gauge remote reading capability.

Gauge Guard: A cover that protects the exposed plastic components on top of the gauge.

These replacement parts are available. Red HDPE Plastic Nut Duro Nitrile Gasket Plastic cellulose acetate inner and outer calibration Aluminum Lock Nut Glass inner calibration

Unmatched Quality & Service

SE-47 - System ComponentLevel Gauge - Clock-style for 72" and larger diameter tanks

818C & 918C Gallon Gauges

Features

• Easy to install on a 2″ male or female threaded tank opening• Vapor tight up to 5 PSI• Swivel base rotates 360° for optimum viewing angle• Measures liquid levels up to 12 feet (3.6 meters)• Proven anti-fog design• High level indicated by red zone indicator• Stainless steel oat and cable• Drop tube oat and drop tube available for tanks with higher-than-normal turbulence• Compatible with Ethanol blends up to 85%• Compatible with Biodiesel blends up to 100%• Intrinsically safe alarm is battery powered • Liter reading gauges available• 918C includes eld adjustable 90 decibel high level audible alarm

Standard oat Drop tube oat

Features

Easy to install on a 2" female threaded tank opening Vapor tight up to 5 PSI Swivel base rotates 360° for optimum viewing angle Measures liquid levels up to 12' (3.6 meters) Proven anti-fog design High level indicated by red zone indicator Stainless steel fl oat and cable Drop tube float and drop tube available for tanks with higher-than-normal turbulence Compatible with ethanol blends up to 85% Compatible with biodiesel blends up to 100% Intrinsically safe alarm is battery powered Liter reading gauges available Includes field adjustable 90 decibel high level audible alarm

Unmatched Quality & Service

SE-47 - System ComponentOverfill Prevention Valve

The 9095A Overfi ll Prevention Valve is installed at the fi ll port of a storage tank. Used in a pressurized tight fi ll application, the valve helps prevent tank overfi lls by closing when the liquid level reaches a pre-set warning level (90-95% full). The valve is installed through a 4” or 6” threaded opening and has a built-in bleed hole that allows the fi ll hose pressure to be relieved after the valve closes. This bleed hole also provides anti-siphon protection for the valve. When installed to manufacturer requirements, the Morrison Fig. 9095A Overfi ll Prevention Valve can eliminate hazardous liquid spills.

The valve can be used in conjunction with the Morrison Fig. 516, 518, and 515 lines of AST Spill Containers or the Fig. 715 line of remote fi ll boxes. for added spill protection. All models are supplied with an adaptor to mount Morrison Fig. 419 aluminum drop tubes. A test mechanism is also sold separately for denoted models. The test mechanism allows a technician to pull on the test line at any time during the fi lling process to actuate the fl oat and stop the fi ll. This allows a technician to verify the valve is working properly.

Features• The 3” valve can be used with 6” Sch. 40 or 80 pipe.• The 2” valves can only be used with 4” Sch. 40 pipe.

Construction Details• Anodized aluminum body• Brass/stainless steel internal components• Stainless steel linkage

Model 9095A Over ll Prevention ValveSPECIFICATION SHEET

Failure to follow any or all of the above warnings may render the valve non-functional and could result in an accidental product spill, property

damage, fi re, explosion, injury or death.

NOTE

Product Warnings and Cautions• 5 PSI & 5 GPM is the minimum fl ow requirement for valve operation. Valve will NOT function in gravity fi ll

applications.• Maximum viscosities (in centistokes): 2” Valve—150 3” Valve—60.• Flow rate of the 2” valve is 350 GPM maximum fl ow (183 GPM at 10 PSI pressure drop). The 3” valve is 800

GPM maximum fl ow rate (566 GPM at 10 PSI pressure drop). (See fl ow curve)• Once closed the valve will allow fl ow of less than 2% of max fl ow rate to relieve fi ll line pressure.• A tight fi ll is required for the valve to operate. Do not substitute any other fi ll adaptors for the special adaptor

supplied.• The valve must be used with clean product. Debris from products such as contaminated used oil may cause

the valve to function improperly.• These valves are rated for a maximum pressure of 100 PSI.• Not suitable for motor oil or other heavy oils.• Consult Morrison Bros. Co. for product compatibility with the valve.

Code ComplianceULC, NFPA 30, 30A, UFC, IFC and PEI /RP200, PEI /RP600, Florida DEP EQ356, CARB VR 402A

9095A-5200AVEVR

The overfill prevention valve is installed at the fill port of a storage tank. Used in a pressurized tight fill application, the valve helps prevent tank overfills by clos-ing when the liquid level reaches a pre-set warning level (90-95% full). The valve is installed through a 4" or 6" threaded opening and has a built-in bleed hole that allows the fill hose pressure to be relieved after the valve closes. This bleed hole also provides anti-siphon protection for the valve.

When installed to manufacturer requirements, the overfill prevention valve can eliminate hazardous liquid spills. The valve can be used in conjunction with AST spill containers or remote fill boxes for added spill protection. All models are supplied with an adaptor to mount an aluminum drop tube. A test mechanism is also sold separately if needed. The test mechanism allows a technician to pull on the test line at any time during the filling process to actuate the float and stop the filling process. This allows a technician to verify the valve is working properly.

Features The 3" valve can be used with 6" Sch. 40 or 80 pipe. The 2" valves can only be used with 4" Sch. 40 pipe.Construction Details Anodized aluminum body Brass/stainless steel internal components Stainless steel linkage

Failure to follow any or all of the warnings listed below may render the valve non-functional and could result in an accidental product spill, property damage, fire, explosion, injury or death.

Warnings and Cautions 5 PSI & 5 GPM is the minimum flow requirement for valve operation. Valve will NOT function in gravity fill applications. Maximum viscosities (in centistokes): 2" Valve-150, 3" Valve-60. Flow rate of the 2" valve is 350 GPM maximum flow (183 GPM @ 10 PSI pressure drop). The 3" valve is 800 GPM maximum flow rate (566 GPM @ 10 PSI pressure drop). Once closed the valve will allow fl ow of less than 2% of max fl ow rate to relieve fill line pressure. A tight fill is required for the valve to operate. Do not substitute any other fill adaptors for the special adaptor supplied. The valve must be used with clean product. Debris from products such as contaminated used oil may cause the valve to function improperly. These valves are rated for a maximum pressure of 100 PSI. Not suitable for motor oil or other heavy oils. Consult Morrison Bros. Co. for product compatibility with the valve.

Code Compliance ULC, NFPA 30, 30A, UFC, IFC and PEI /RP200, PEI /RP600, Florida DEP EQ356, CARB VR 402A

Unmatched Quality & Service

SE-47 - System ComponentDrop Tube & Normal (Mushroom) Vent with PipeThe Fig. 419 Drop Tube directs product fl ow to liquid level when fi lling a

storage tank. The drop tube prevents free fl l and reduces agitation of liquid when fi lling. The fl anges fi ts between tight fi ll adaptor riser pipe. The tube extends to near bottom for submerged fi ll.

All Morrison Drop Tubes are extruded aluminum.

The 2” and 3” drop tubes can also be attached to the Morrison Fig. 9095A AST Overfi ll Prevention Valve.

EVR approved models available.

Model 419 Drop TubeSPECIFICATION SHEET

570 E. 7th Street, P.O. Box 238 | Dubuque, IA 52004-0238t. 563.583.5701 | 800.553.4840 | f. 563.583.5028

www.morbros.com

I.D. Number A B C D E F G H I Wt.

419---0600 1T 2" x 4' AL 2.2" 0.015 1.906 + 0.062 -.000 0.062 + 0.006 -.010 4 feet 1.75

419---0700 1T 2" x 6' AL 2.2" 0.015 1.906 + 0.062 -.000 0.062 + 0.006 -.010 6 feet 2.5

419---0100 1T 2" x 12' AL 2.2" 0.015 1.906 + 0.062 -.000 0.062 + 0.006 -.010 12 feet 5

419---0200 1T 3" x 10' AL 3.31" 0.015 2.946 0.015 0.063 0.003 10 feet 6.6

419---1400 1T 3" x 12' AL 3.31" 0.015 2.946 0.015 0.063 0.003 12 feet 9

419---1000 1T 4" x 4' AL 4.22" 0.015 3.875 0.023 0.062 0.007 4 feet 5.5

419---0900 1T 4" x 5' AL 4.22" 0.015 3.875 0.023 0.062 0.007 5 feet 6

419---0800 1T 4" x 7' AL 4.22" 0.015 3.875 0.023 0.062 0.007 7 feet 7.5

419---0300 1T 4" x 10' AL 4.22" 0.015 3.875 0.023 0.062 0.007 10 feet 9

419---0400 1T 4" x 12' AL 4.22" 0.015 3.875 0.023 0.062 0.007 12 feet 12

419---0500 1T 4" x 15' AL 4.22" 0.015 3.875 0.023 0.062 0.007 15 feet 10.5

419---02041TEVR 2” x 4’ AL 2.2” 0.015 1.906 + 0.062 -.000 0.062 + 0.006 -.010 4 feet 1.75

419---02061TEVR 2” x 6’ AL 2.2” 0.015 1.906 + 0.062 -.000 0.062 + 0.006 -.010 6 feet 2.5

419---02121TEVR 2” x 12’ AL 2.2” 0.015 1.906 + 0.062 -.000 0.062 + 0.006 -.010 12 feet 5

419---03101TEVR 3” x 10’ AL 3.31” 0.015 2.946 0.015 0.063 0.003 10 feet 6.6

419---03121TEVR 3” x 12’ AL 3.31” 0.015 2.946 0.015 0.063 0.003 12 feet 9

419A--02041TEVR 2” x 4’ AN 2.2” 0.015 1.906 + 0.062 -.000 0.062 + 0.006 -.010 4 feet 1.75

419A--02061TEVR 2” x 6’ AN 2.2” 0.015 1.906 + 0.062 -.000 0.062 + 0.006 -.010 6 feet 2.5

419A--02121TEVR 2” x 12’ AN 2.2” 0.015 1.906 + 0.062 -.000 0.062 + 0.006 -.010 12 feet 5

419A--03101TEVR 3” x 10’ AN 3.31” 0.015 2.946 0.015 0.063 0.003 10 feet 6.6

419A--03121TEVR 3” x 12’ AN 3.31” 0.015 2.946 0.015 0.063 0.003 12 feet 9

419A--0500 1TA 4" x 15' AN 4.22" 0.015 3.875 0.023 0.062 0.007 15 feet 10.5

E RV

SPECIFICATION OPTIONS:

A—SizeB—Aluminum (AL) or Anodized Aluminum(AN)C—Flange ODD—Flange OD + / - E—Tube ID

F—Tube ID + / -G—WallH—Wall + / -I—OAL LengthWT.—Weight (Lb.)

The drop tube directs product flow to liquid level when filling a storage tank. The drop tube prevents free fill and reduces agitation of liquid when filling. The flanges fits between tight fill adaptor riser pipe. The tube extends to near bottom for submerged fill.

All drop tubes are extruded aluminum. The 2” and 3” drop tubes can also be attached to the AST Overfill Prevention Valve.

Drop tube length determined by tank diameter.

• Mushroom style free flow vent• Stainless-steel mesh screen. • Domed vent top prevents tank contamination from entering vent lines. • NPT threads • Cast iron, zinc plated

• 2" diameter galvanized steel vent pipe Length determined by tank volume/size

MUSHROOM TYPE

VENT CAPS

Cast Iron, galvanized, threadedcap with stainless steel screen.

ITEM No. SIZE

5301 3/4"

5302 1"

5303 1-1/4"

5304 1-1/2"

5305 2"

5306 3"

5307 4"

PRICE

4.13

5.18

6.32

7.94

11.28

27.61

32.87

Unmatched Quality & Service

SE-47 - System ComponentRemote Fill Port

• Spill capacity 10 gallons• 14 gauge Stainless-steel construction • Inlet and outlet available in 2" or 3" size

Includes: • Dust plug• Quick disconnect - female• Check valve• Hand transfer pump• Transfer hose with check valve and ball valve assembly• Ball valve• Outlet• Mounting Brackets as needed• 1" Drain fitting• Hinged door wiht locking handle• VR 4" aluminum adapter X 3" NPT• VR 4" aluminum cam lever cap.• 3" Stainless-steel full coupling• 3" Stainless-steel nipple