View
6
Download
0
Category
Preview:
Citation preview
GEOTECH WIRELINE RANGE
2
GEOTECH S WIRELINE CORE BARRELS
> HOISTING SWIVEL
Connection thread Maxi load (KN) Weight (kg) Ref.
140 WL Pin 50 000 18 70.1205
> SaVER Sub
>dRIVE SubS
Ref. description
70.1711 Saver sub utile length 120
Ref. description
70.1169 Adaptor 2’’3/8 aPI REG bOX x 140 WL PIN sub
70.1562 Adaptor 2’’3/8 aPI REG PIN x 140 WL PIN sub
70.1269 Adaptor 3’’1/2 aPI REG bOX x 140 WL PIN sub
70.496 Adaptor 3’’1/2 aPI REG PIN x 140 WL PIN sub
70.1699 Adaptor NWY bOX x 140 WL PIN sub
www.mgs.co.uk
3
> 140-WL WIRELINE dRILL ROdS
> dIMENSIONaL CHaRaCTERISTICS
> STaNdaRd PaCKaGING
Mechanical information
description Pre-torque (N.m)Maximum working
torque (N.m)Torque at yield
point (N.m)Pulling force at yield point (KN)
Maximum work-ing pulling force
(KN)
Collapse pressure on body (Mpa Psi)
burst pressure on box thread
(Mpa Psi))
burst pressure on the body
(Mpa Psi)
140-WL 1200 3910 19548 896 358 71 (10355) 24 (3428) 66 (9546)
Part N° description Weight (kgs) usefull length (mm) O.d. (mm/inch) I.d. (mm/inch) Thread length (mm/inch)
53.354 104WL x 500 12 500 139.7 / 5’’1/2 125 / 4’’8/9 64 / 2’’1/2
53.54.50 104WL x 1000 21 1000 139.7 / 5’’1/2 125 / 4’’8/9 64 / 2’’1/2
53.355 104WL x 1500 33 1500 139.7 / 5’’1/2 125 / 4’’8/9 64 / 2’’1/2
53.356 104WL x 3000 67 3000 139.7 / 5’’1/2 125 / 4’’8/9 64 / 2’’1/2
> MECHaNICaL CHaRaCTERISTICS
GEOTECH S WIRELINE CORE BARRELS
Number of drill rods per bundle: 7
Width x higher with wooden block : 420 X 450
www.mgs.co.uk
4
3 - 5 - 6 - 7 66.9103 1500 GEOTECH S Complete inner tube x 1500
3 - 5 - 6 - 7 66.9104 GEOTECH S Complete inner tube x 3000
> COMPLETE WIRELINE CORE baRREL GEOTECH S> COMPLETE CORE baRREL
> SPaRE PaRTS
1-12 66.9100 GEOTECH S Complete core barrel x 1500
1-12 66.9101 GEOTECH S Complete core barrel x 3000
Note : Item in the complete inner tube
4 37.0919.30 GEOTECH S Liner x 1500 1
4 37.0909.30 GEOTECH S Liner x 3000 1
6 37.9110.DIFL Fluted core lifter diamond plated 1
6 37.9110.BASF Basket core lifter short fingers 1
6 37.9110.BALF Basket core lifter long fingers 1
1 65.9122 Loading sleeve 1
2 65.9121 Retaining spanner 1
> aCCESSORIES
> COMPLETE INNER TubE
GEOTECH S WIRELINE CORE BARRELS
1 65.9125 GEOTECH S Stabilizer - carbide insert 1
2 65.9118 GEOTECH S Locking coupling 1
3 66.9110.50* T GEOTECH S Complete head 1
5 65.0532* Inner tube GEOTECH S x 1500 1
5 65.0533* Inner tube GEOTECH S x 3000 1
6 65.9110* GEOTECH S Core lifter 1
7 65.9119* GEOTECH S Coreliftercase 1
8 65.9117 GEOTECH S Landing sleeve 1
9 65.0149 GEOTECH S Outer tube x 1500 1
9 65.0150 GEOTECH S Outer tube x 3000 1
10 65.9116 GEOTECH S Reaming shell blank 1
11 65.9127 GEOTECH S Inner tube stabilizer 1
12 65.9120 GEOTECH S Protector 1
OPTIONS
Qty
12
4
6
7
1
2
8
9
10
11
12
3
5
www.mgs.co.uk
5
1-20 66.9110.50 Complete head GEOTECH S
> GEOTECH S HEad> COMPLETE HEad
> SPaRE PaRTS
1-6 66.9110.10 Top head GEOTECH S -
1 65.9126.50 Spearhead GEOTECH S 1
2 65.9115 Latch GEOTECH S 3
3 09.9121 Latch compression spring GEOTECH S 3
4 09.9111 Spring pin ø10 x 40 3
5 09.9112 Spring pin ø4 x 40 3
6 09.9113 Spring pin ø6 x 40 3
7 65.9109 Landing shoulder GEOTECH S 1
8 65.9105 Locking nut GEOTECH S 1
9 65.9100 Sleeve GEOTECH S 1
10 65.9128 Spearhead point GEOTECH S 1
11 09.9123 ball bearing GEOTECH S 1
12 65.9108 Shim GEOTECH S 1
13 09.9103 ball bearing GEOTECH S 1
14 65.9101 Shaft GEOTECH S 1
15 09.0368 Grease fitting 1
16 09.9104 ball bearing GEOTECH S 1
17 09.9124 ball bearing GEOTECH S 1
18 09.9107 Lock nut GEOTECH S 1
19 65.9102.05 bearing housing GEOTECH S 1
20 09.0237 Steel ball 1
21 65.9102.10 Check valve body GEOTECH S 1
Qty
- 65.9130 Handling hook 1
> aCCESSORIES
10
1
6
2
7
8
9
11
12
13
19
18
17
4
5
14
15
16
21
3
GEOTECH S WIRELINE CORE BARRELS
21
20
www.mgs.co.uk
6
> GEOTECH S SYSTEM NON CORING OPTION
> COMPLETE dEVICE
> PIÈCES DÉTACHÉES / SPaRE PaRTS
> TOP HEAD GEOTECH S
1 66.9110.10 Top head GEOTECH S 1
2 65.9109.10 Special landing shoulder GEOTECH S 1
3 65.9105 Locking nut GEOTECH S 1
4 65.9150 GEOTECH S adaptor HEad/ROd 1
5 52.127 PR 76 drill rod 2”3/8 aPI x 1,5 1
6 70.392 2”3/8 REG PINxbOX adaptor 1
7 65.9151 GEOTECH S adaptor ROd/TRICONE 1
8 65.9127 GEOTECH S inner tube stabilizer 1
Qty
1-6 66.9110.10 Top head GEOTECH S
1 65.9126.50 Spearhead GEOTECH S 1
2 65.9115 Latch GEOTECH S 3
3 09.9121 Latch compression spring GEOTECH S 3
4 09.9111 Spring pin ø10 x 40 3
5 09.9112 Spring pin ø4 x 40 3
6 09.9113 Spring pin ø6 x 40 3
7 65.9128 Spearhead point GEOTECH S 1
Qty
1-9 66.9100.10 GEOTECH S Complete system tricone method x 1500
S
1
6
2
3
45
7
5
6
8
7
2
3
4
1
GEOTECH S WIRELINE CORE BARRELS
www.mgs.co.uk
7
1-7 66.9200.70 Mining complete overshot GEOTECH S
> MINING GEOTECH S OVERSHOT
> COMPLETE dEVICE
> SPaRE PaRTS
1 09.9210.10 Eye bolt overshot GEOTECH S 1
2 65.9209.20 Eye bolt support overshot GEOTECH S 1
3 65.9207.20 Lock nut overshot GEOTECH S 1
4 65.9202.70 Spindle overshot GEOTECH S 1
5 09.9111 Spring pin GEOTECH S 1
6 65.9203.20 Case overshot GEOTECH S 1
7 65.9204 Lifting ring overshot GEOTECH S 1
Qty
1
2
3
5
7
6
4
GEOTECH S WIRELINE CORE BARRELS
www.mgs.co.uk
8
> INSHOT GEOTECH S (dRY HOLE dEVICE)
> COMPLETE dEVICE
> SPaRE PaRTS
1 65.9303 GEOTECH S inshot head 1
2 65.9115 Latch GEOTECH S 3
3 65.9301 GEOTECH S inshot safety nut 1
4 65.9302 GEOTECH S inshot catch 1
5 09.9305 Screw M16 1
6 09.9307 GEOTECH S inshot compression spring 1
7 09.9212 Washer M16 1
8 09.9306 M16 nut 1
9 09.9121 Latch compression spring GEOTECH S 3
10 09.9111 Spring pin ø10 x 40 3
11 09.9112 Spring pin ø4 x 40 3
12 09.9113 Spring pin ø6 x 40 3
13 65.9304 Lock nut 1
Qty
1-12 66.9300 Système trou sec GEOTECH SInshot GEOTECH S
7
6
1210
29 11
3
4
5
1
2
8
13
> MAINTENANCE KIT GEOTECH S
2-4-6-9-10-11-12 66.9300.90 Maintenance kit GEOTECH S
GEOTECH S WIRELINE CORE BARRELS
www.mgs.co.uk
9
Series diameter capacity (mm) Ref. Weight (kg)
48’’ 168 30.4039 15.6
> jaW WRENCH
> Sturdy, cast-iron housing.
> I-beam handle with full floating hook jaw.
> Nonstick adjustment nut.
> Replaceable heat-treated hook and heel jaws.
> TubE CORE baRREL WRENCHES
> CORE EXTRaCTOR
Ref. description
65.221.661 Full grip wrench GEOTECH S inner tube
Ref. description
30.221.915 Full grip wrench GEOTECH S outer tube
Core barrel diam. air-water connection Ref.
GEOTECH S 1” gaz 70.1395
> SYNTHETIC GREaSE bIOdEGRadabLE
Reference description Packing eight
30.3208 biodegradable grease Plastic bucket 5kg
30.3209 biodegradable grease Steel keg 50kg
GEOTECH S WIRELINE CORE BARRELS
www.mgs.co.uk
10
> MAINTENANCE KIT GEOTECH S HEad
- 66.9110.90 Maintenance kit GEOTECH S head
2-3-4-5-6 66.9110.91 Kit de maintenance locquetLatch mending kit
> SPaRE PaRTS
2 65.9115 Latch GEOTECH S 3
3 09.9121 Latch compression spring GEOTECH S 3
4 09.9111 Spring pin ø10 x 40 3
5 09.9112 Spring pin ø4 x 40 3
6 09.9113 Spring pin ø6 x 40 3
7 65.9109 Landing shoulder GEOTECH S 1
11 09.9123 ball bearing GEOTECH S 1
12 65.9108 Shim GEOTECH S 1
13 09.9103 ball bearing GEOTECH S 1
15 09.0368 Grease fitting 3
16 09.9104 ball bearing GEOTECH S 1
17 09.9124 ball bearing GEOTECH S 1
18 09.9107 Lock nut GEOTECH S 1
20 09.0237 Steel ball 1
Qty 1
6
2
7
11
12
13
20
18
17
4
5
15
16
3
GEOTECH S WIRELINE CORE BARRELS
www.mgs.co.uk
11
> MAINTENANCE KIT GEOTECH S dRY HOLE
- 66.9300.90 Maintenance kit GEOTECH S dry hole
> SPaRE PaRTS
2 65.9115 Latch GEOTECH S 3
4 65.9302 GEOTECH S inshot catch 1
6 09.9307 GEOTECH S inshot compression spring 1
9 09.9121 Latch compression spring GEOTECH S 3
10 09.9111 Spring pin ø10 x 40 3
11 09.9112 G Spring pin ø4 x 40 3
12 09.9113 Spring pin ø6 x 40 3
Qty
6
1210
29 11
4
2
GEOTECH S WIRELINE CORE BARRELS
www.mgs.co.uk
12
N-WL WIRELINE CORE BARRELS
Qty
1 66.220.450* Knuckle head complete EZY-LATCH™ 1
2 65.221.425* Inner tube x 5FT 1
2 65.221.430* Inner tube x 10FT 1
3 65.221.433* Core lifter slotted 1
4 65.221.432* Stop ring 1
5 65.221.431* Core lifter case 1
6 65.221.434 Locking coupling EUTALOY 1
7 65.221.435 Adaptor coupling 1
8 65.221.436 Landing ring 1
9 65.221.445 Outer tube x 5Ft 1
9 65.221.450 T Outer tube x 10Ft 1
10 65.221.439 Inner tube stabilizer 1
11 65.221.440 Thread protector (not designed) 1
ACCESSOIRES / ACCESSORIES12 31.710.700.xx Diamond reaming shell 1
1331.xxx.xxx
31.xxx.xxxCoring bit 1
1-11 66.202.450 N-WL core barrel EUTALOY x 5ft EZY-LATCH™
1-11 66.202.460 N-WL core barrel EUTALOY x 10ft EZY-LATCH™
- 66.212.450 N-WL complete inner tube x 5ft EZY-LATCH™
- 66.212.460 N-WL complete inner tube x 10ft EZY-LATCH™
> COMPLETE CORE BARREL WITH N/H KNUCKLE HEAD
> OMPLETE INNER TUBE
> COMPLETE WIRELINE CORE BARREL N-WL - WITH N/H EZY-LATCH™ HEAD
> SPARE PARTS
* Nota / Note : Item in the complete inner tube
4
3
5
6
7
8
9
10
12
13
1
2
www.mgs.co.uk
13
Qty
New top part EZY-LATCH™
1-3 66.001055 Spearhead point sub assy
4 65.000823 Housing spearpoint 15 09.000688 Ball 16 09.000313 Ball spring 17 09.000955 Compression head spring 18 65.000821 Spring keeper 19 65.001052 Lock screw 1
10 09.001053 ap screw 111 65.000817 Washer 112 09.000917 Latch spring 113 65.000901 Operating sleeve 114 65.000902.U Latch 215 65.001074 Shoulder bolt 216 65.000813 Carrier 134 09.11.62374 Steel ball Ø0.78” 1
Standard lower head assembly
17 65.221.409.2 Landing shoulder 1
18 09.221.421 Steel ball Ø7/8” 1
19 09.11.62380 Landing indicator 1
20 65.221.409.3 Lower body 1
21 09.221.410 Lock nut 1
22 65.221.411 Spindle 1
23 09.221.412U Shut off valve 2
24 65.221.413 Valve adjusting washer 2
25 09.221.414 Hanger bearing 1
26 65.221.415 Spindle bearing 1
27 09.221.415.10 Bronze bushing 1
28 09.221.424 Hanger bearing 1
29 09.221.416 Compression spring 1
30 09.221.417 Self lock nut 1
31 65.221.419 Inner tube cap 1
32 09.221.220 Grease itting 1
33 65.221.423 Check valve body 1
N-WL WIRELINE KNUCKLE HEAD COMPLETE
> SPARE PARTS
1-33 66.220.450 N-WL head assy “knuckle head” EZY-LATCH™
1
2
3
4
6
7
5
9
10
11
13
17
34
20
21
22
23
23
25
26
12
19
24
24
8
14
16
14
15
27
28
29
30
31
32
18
33
N-WL WIRELINE CORE BARRELS
www.mgs.co.uk
14
qtéQty
1-3 66.001055 Spearhead point sub assembly
5 09.000688 Ball 1
6 09.000313 Ball spring 1
14 65.000902.U Latch 4
15 65.001074 Shoulder bolt 2
17 65.221.409.2 Landing shoulder 1
21 09.221.410 Lock nut 1
23 09.221.412U Shut off valve 4
25 09.221.414 Hanger bearing 1
26 65.221.415 Spindle bearing 1
27 09.221.415.10 Bronze bushing 1
28 09.221.424 Hanger bearing 1
30 09.221.417 Self lock nut 1
32 09.221.220 Grease fitting 2
> COMPLETE KIT CONTENT
> COMPOSITION DU KIT LOqUET / LATCH KIT CONTENT
14 65.000902.U Latch 2
15 65.001074 Shoulder bolt 2
> MAINTENANCE KIT N-WL
> MAINTENANCE KNUCKLE HEAD KIT
14-15 66.001118 Latch kit EZY-LATCH™
1
2
3
26
28
14
17
21
23
25
27
30
32
15
5
6
- 66.220.490 N-WL complete head maintenance core barrel kit EZY-LATCH™
N-WL WIRELINE CORE BARRELS
www.mgs.co.uk
15
> MAINTENANCE KIT N-WL
> KIT CONTENT
> MAINTENANCE CORE BARREL KIT
Qty
1 65.221.433 Core lifter 20
2 65.221.432 Stop ring 2
3 65.221.431 Core lifter case 4
4 65.221.436 Landing ring 2
5 65.221.439 Inner tube stabilizer 2
1-5 66.202.400 N-WL complete maintenance core barrel kit
400 à 500 +/- 0.5
TOLERENCES GENERALES D'USINAGE
DES COTES NON TOLERENCEES
SAUF INDICATIONS
LES ARETES VIVES
SERONT ABATTUES
0 à 50 +/- 0.1
50 à 100 +/- 0.2
100 à 250 +/- 0.3
250 à 400 +/- 0.4
600 à 1000 +/- 0.75
: : : : : :
400 à 500 +/- 0.5
TOLERENCES GENERALES D'USINAGE
DES COTES NON TOLERENCEES
SAUF INDICATIONS
LES ARETES VIVES
SERONT ABATTUES
0 à 50 +/- 0.1
50 à 100 +/- 0.2
100 à 250 +/- 0.3
250 à 400 +/- 0.4
600 à 1000 +/- 0.75
: : : : : :
1
2
3
4
5
N-WL WIRELINE CORE BARRELS
www.mgs.co.uk
16
400 à 500 +/- 0.5
TOLERENCES GENERALES D'USINAGE
DES COTES NON TOLERENCEES
SAUF INDICATIONS
LES ARETES VIVES
SERONT ABATTUES
0 à 50 +/- 0.1
50 à 100 +/- 0.2
100 à 250 +/- 0.3
250 à 400 +/- 0.4
600 à 1000 +/- 0.75
: : : : : :
400 à 500 +/- 0.5
TOLERENCES GENERALES D'USINAGE
DES COTES NON TOLERENCEES
SAUF INDICATIONS
LES ARETES VIVES
SERONT ABATTUES
0 à 50 +/- 0.1
50 à 100 +/- 0.2
100 à 250 +/- 0.3
250 à 400 +/- 0.4
600 à 1000 +/- 0.75
: : : : : :
> LOCKING COUPLING
> CORE LIFTER
CORE BARREL ExTENSION
OPTION WIRELINE CORE BARREL N-WL
3 65.221.433.FLPR extrCore lifter N-WL fluted
3 37.221.433FL.DP Diamond core lifter fluted
Qty
1 65.221.491 Inner tube adaptor 1
2 65.221.430 Inner tube x 10FT 1
3 65.221.450 Outer tube x 10Ft 1
4 65.221.439 Inner tube stabilizer 1
6 65.221.434.FH Locking coupling FULL HOLE
6 65.221.434.FH.ST* Locking coupling without tang FULL HOLE
6 65.221.434.ST* Locking coupling without tang EUTALOY
* : Only on request
1
2
3
4
N-WL WIRELINE CORE BARRELS
www.mgs.co.uk
17
3-4-5-12-13-14 66.421.401 Conversion kit core barrel N-WL --> N-WL 3 x 5Ft
3-4-5-12-13-14 66.421.402 Conversion kit core barrel N-WL --> N-WL 3 x 10Ft
N-WL TRIPLEx OPTION (N-WL3) - WITH SPLIT TUBE
> COMPLETE CORE BARREL
> SPARE PARTS
> COMPLETE INNER TUBE
> CONVERSION KIT CORE BARREL N-WL --> N-WL 3
*Note : Item in the complete inner tube
Qty
1 66.220.450* Knuckle head complete EZY-LATCH™ 1
2 65.221.425* Inner tube x 5FT 1
2 65.221.430* Inner tube x 10FT 1
3 65.421.433.FLPR* Core lifter fluted N-WL3 1
4 65.421.432* Stop ring N-WL3 1
5 65.421.431* Core lifter case N-WL3 1
6 65.221.434 Locking coupling EUTALOY 1
7 65.221.435 Adaptor coupling 1
8 65.221.436 Landing ring 1
9 65.221.445 Outer tube x 5Ft 1
9 65.221.450 Outer tube x 10Ft 1
10 65.221.439 Inner tube stabilizer 1
11 65.221.440 Thread protector 1
12 09.421.426* O-ring 1
13 65.421.427* Piston 1
14 65.421.428* Split tube x 5ft 1
14 65.421.429* Split tube x 10ft 1
ACCESSORIES
15 31.710.400.xx Diamond reaming shell 1
16 31.xxx.xxx Coring bit 1
1-11 66.402.450 N-WL 3 core barrel EUTALOY x 5ft EZY-LATCH™
1-11 66.402.460 N-WL 3 core barrel EUTALOY x 10ft EZY-LATCH™
- 66.412.450 N-WL3 complete inner tube x 5ft EZY-LATCH™
- 66.412.460TN-WL 3 complete inner tube x 10ft EZY-LATCH™
400 à 500 +/- 0.5
TOLERENCES GENERALES D'USINAGE
DES COTES NON TOLERENCEES
SAUF INDICATIONS
LES ARETES VIVES
SERONT ABATTUES
0 à 50 +/- 0.1
50 à 100 +/- 0.2
100 à 250 +/- 0.3
250 à 400 +/- 0.4
600 à 1000 +/- 0.75
: : : : : :
400 à 500 +/- 0.5
TOLERENCES GENERALES D'USINAGE
DES COTES NON TOLERENCEES
SAUF INDICATIONS
LES ARETES VIVES
SERONT ABATTUES
0 à 50 +/- 0.1
50 à 100 +/- 0.2
100 à 250 +/- 0.3
250 à 400 +/- 0.4
600 à 1000 +/- 0.75
: : : : : :
1
12
2
4
13
14
3
5
6
7
8
9
10
11
15
16
N-WL WIRELINE CORE BARRELS
www.mgs.co.uk
18
The standard N-WL core barrels can be easily converted to the Triplex version using a split triple inner tube. To convert the core barrel you have to add in the inner tube assembly: the O-ring, the piston and the split third inner tube. And you have to replace the stop-ring, the core lifter, the core lifter case and the coring bit. The triplex option can be made with a plastic liner as well, in this case, the split tube, the piston and the o-ring are replaced by the liner.
> LOCKING COUPLING
OPTION WIRELINE CORE BARREL N-WL 3 - WITH SPLIT TUBE
OPTION WIRELINE CORE BARREL N-WL 3 - WITH PLASTIC
6 65.221.434.FH Locking coupling FULL HOLE
6 65.221.434.FH.ST* Locking coupling without tang FULL HOLE
6 65.221.434.ST* Locking coupling without tang EUTALOY
> CORE LIFTER
3 65.421.433 Core lifter N-WL 3 slotted
66.421.437 Kit pump out N-WL3(pumpout adaptor 65.421.437 + Piston plug 65.421.338)
- Plastic liner N-WL x 1500
- Plastic liner N-WL x 3000
The core
* :Only on request
Kit pump out
Water pump
N-WL WIRELINE CORE BARRELS
www.mgs.co.uk
19
Note : Item in the complete inner tubeTo convert a classical N-WL core barrel in N-WL 2”,it necessary to replace the following items :
- The inner tube (item. n°2)- The landing ring (item. n°8)- The stop ring (item. n°4)- The core lifter (item. n°3)- The core lifter case (item. n°5)- The coring bit (item. n°13)- The stabilizer (item. n°10)
> SPARE PARTS
N-WL 2’’ THINWALLED OPTION> COMPLETE CORE BARREL
> COMPLETE INNER TUBE
1-11 66.207.450 N-WL 2’’ core barrel EUTALOY x 5ft EZY-LATCH™
1-11 66.207.460 N-WL 2’’ core barrel EUTALOY x 10ft EZY-LATCH™
- 66.217.450 N-WL 2’’ complete inner tube x 5ft EZY-LATCH™
- 66.217.460 N-WL 2’’ complete inner tube x 10ft EZY-LATCH™
Qty
1 66.227.450* Knuckle head complete EZY-LATCH™ 1
2 65.227.425* Inner tube x 5FT 1
2 65.227.430* Inner tube x 10FT 1
3 65.227.433.FLPR* Core lifter fluted 1
4 65.227.432* Stop ring 1
5 65.227.431* Core lifter case 1
6 65.221.434 Locking coupling EUTALOY 1
7 65.221.435 Adaptor coupling 1
8 65.227.436 Landing ring 1
9 65.221.445 Outer tube x 5Ft 1
9 65.221.450 Outer tube x 10Ft 1
10 65.227.439 Inner tube stabilizer 1
11 65.221.440 Thread protector 1
ACCESSORIES12 31.710.300.xx Diamond reaming shell 1
13 31.700/701.xxx Coring bit 1
12
H
G
F
E
D
C
B
A
J
K
L
M
N
P
Q
R
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
1110987654321 13 14 15 16 17 18 19 20 21 22 23 24
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Complete core barrel N-WL2WEIGHT:
A0
SHEET 1 OF 1SCALE:1:5
DWG NO.
TITLE:
REVISIONDO NOT SCALE DRAWING
MATERIAL:
DATESIGNATURENAME
DEBUR AND BREAK SHARP EDGES
FINISH:UNLESS OTHERWISE SPECIFIED:DIMENSIONS ARE IN MILLIMETERSSURFACE FINISH:TOLERANCES: LINEAR: ANGULAR:
Q.A
MFG
APPV'D
CHK'D
DRAWN
12
H
G
F
E
D
C
B
A
J
K
L
M
N
P
Q
R
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
1110987654321 13 14 15 16 17 18 19 20 21 22 23 24
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Complete core barrel N-WL2WEIGHT:
A0
SHEET 1 OF 1SCALE:1:5
DWG NO.
TITLE:
REVISIONDO NOT SCALE DRAWING
MATERIAL:
DATESIGNATURENAME
DEBUR AND BREAK SHARP EDGES
FINISH:UNLESS OTHERWISE SPECIFIED:DIMENSIONS ARE IN MILLIMETERSSURFACE FINISH:TOLERANCES: LINEAR: ANGULAR:
Q.A
MFG
APPV'D
CHK'D
DRAWN
12
H
G
F
E
D
C
B
A
J
K
L
M
N
P
Q
R
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
1110987654321 13 14 15 16 17 18 19 20 21 22 23 24
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Complete core barrel H-WLWEIGHT:
A0
SHEET 1 OF 1SCALE:1:20
DWG NO.
TITLE:
REVISIONDO NOT SCALE DRAWING
MATERIAL:
DATESIGNATURENAME
DEBUR AND BREAK SHARP EDGES
FINISH:UNLESS OTHERWISE SPECIFIED:DIMENSIONS ARE IN MILLIMETERSSURFACE FINISH:TOLERANCES: LINEAR: ANGULAR:
Q.A
MFG
APPV'D
CHK'D
DRAWN
400 à 500 +/- 0.5
TOLERENCES GENERALES D'USINAGE
DES COTES NON TOLERENCEES
SAUF INDICATIONS
LES ARETES VIVES
SERONT ABATTUES
0 à 50 +/- 0.1
50 à 100 +/- 0.2
100 à 250 +/- 0.3
250 à 400 +/- 0.4
600 à 1000 +/- 0.75
: : : : : :
16
7
8
9
10
11
12
13
2
4
3
5
N-WL WIRELINE CORE BARRELS
www.mgs.co.uk
20
2-5-16 66.227.401 Conversion kit knuckle head N-WL --> N-WL 2”
1-18 66.227.450 N-WL 2” head assy “knuckle heal” EZY-LATCH™
N-WL 2’’ THINWALLED OPTION
> KNUCKLE HEAD COMPLETE
> CONVERSION KIT KNUCKLE HEAD N-WL --> N-WL 2’’
Qty
1 66.000800 Common Top part EZY-LATCH™ N/H-WL 1
2 65.227.409.2 Landing shoulder N-WL2’’ 1
3 09.221.421 Steel ball Ø7/8” 1
4 09.11.62380 landing indicator 1
5 65.227.409.3 Lower body N-WL2’’ 1
6 09.221.410 Lock nut 1
7 65.221.411 Spindle 1
8 09.221.412U Shut off valve 2
9 65.221.413 Valve adjusting washer 2
10 09.221.414 Hanger bearing 1
11 65.221.415 Spindle bearing 1
12 09.221.415.10 Bronze bushing 1
13 09.221.424 Hanger bearing 1
14 09.221.416 Compression spring 1
15 09.221.417 Self lock nut 1
16 65.227.419 Inner tube cap N-WL2’’ 1
17 65.221.423 Check valve body 1
18 09.221.220 Grease fitting 1
19 09.11.62374 Steel ball Ø0.78” 1
ACCESSORIES
- 66.227.480- Inner tube cap assy 1
> SPARE PARTS
400 à 500 +/- 0.5
TOLERENCES GENERALES D'USINAGE
DES COTES NON TOLERENCEES
SAUF INDICATIONS
LES ARETES VIVES
SERONT ABATTUES
0 à 50 +/- 0.1
50 à 100 +/- 0.2
100 à 250 +/- 0.3
250 à 400 +/- 0.4
600 à 1000 +/- 0.75
: : : : : :
19
13
16
5
6
7
8
8
10
11
12
14
15
3
17
1
18
4
9
9
2
To convert a classical N-WL head in N-WL 2”,it necessary to replace the following items :- The inner tube cap (item. n°16)- The landing shoulder (item. n°2)- The lower body (item. n°5)
N-WL WIRELINE CORE BARRELS
www.mgs.co.uk
21
Qty
1 65.227.481 Inner tube extension x 1500 1
1 65.227.482 Inner tube extension x 3000 1
2 65.221.445 Outer tube x 5Ft 1
2 65.221.450 Outer tube x 10Ft 1
3 65.227.439 Inner tube stabilizer 1
> ExTENSION CAROTTIER CORE BARREL ExTENSION
> LOCKING COUPLING
OPTION WIRELINE CORE BARREL N-WL 2
6 65.221.434.FH Locking coupling FULL HOLE
6 65.221.434.FH.ST* Locking coupling without tang FULL HOLE
6 65.221.434.ST* MancLocking coupling without tang EUTALOY
> CORE LIFTER
3 65.227.433 Core lifter N-WL 2” slotted
* : Only on request
1
400 à 500 +/- 0.5
TOLERENCES GENERALES D'USINAGE
DES COTES NON TOLERENCEES
SAUF INDICATIONS
LES ARETES VIVES
SERONT ABATTUES
0 à 50 +/- 0.1
50 à 100 +/- 0.2
100 à 250 +/- 0.3
250 à 400 +/- 0.4
600 à 1000 +/- 0.75
: : : : : :
400 à 500 +/- 0.5
TOLERENCES GENERALES D'USINAGE
DES COTES NON TOLERENCEES
SAUF INDICATIONS
LES ARETES VIVES
SERONT ABATTUES
0 à 50 +/- 0.1
50 à 100 +/- 0.2
100 à 250 +/- 0.3
250 à 400 +/- 0.4
600 à 1000 +/- 0.75
: : : : : :
12
H
G
F
E
D
C
B
A
J
K
L
M
N
P
Q
R
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
1110987654321 13 14 15 16 17 18 19 20 21 22 23 24
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Complete core barrel N-WL2WEIGHT:
A0
SHEET 1 OF 1SCALE:1:5
DWG NO.
TITLE:
REVISIONDO NOT SCALE DRAWING
MATERIAL:
DATESIGNATURENAME
DEBUR AND BREAK SHARP EDGES
FINISH:UNLESS OTHERWISE SPECIFIED:DIMENSIONS ARE IN MILLIMETERSSURFACE FINISH:TOLERANCES: LINEAR: ANGULAR:
Q.A
MFG
APPV'D
CHK'D
DRAWN
12
H
G
F
E
D
C
B
A
J
K
L
M
N
P
Q
R
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
1110987654321 13 14 15 16 17 18 19 20 21 22 23 24
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Complete core barrel N-WL2WEIGHT:
A0
SHEET 1 OF 1SCALE:1:5
DWG NO.
TITLE:
REVISIONDO NOT SCALE DRAWING
MATERIAL:
DATESIGNATURENAME
DEBUR AND BREAK SHARP EDGES
FINISH:UNLESS OTHERWISE SPECIFIED:DIMENSIONS ARE IN MILLIMETERSSURFACE FINISH:TOLERANCES: LINEAR: ANGULAR:
Q.A
MFG
APPV'D
CHK'D
DRAWN
3
2
N-WL WIRELINE CORE BARRELS
www.mgs.co.uk
22
1-18 65.232.400 N-WL overshot
> N-WL OVERSHOT
> COMPLETE OVERSHOT
> SPARE PARTS
1
2
318
17
12
4
6
5
11
13
7
9
10
8
8
14
15
16
Qty
1 65.231.202 Eye bolt 1
2 65.232.203 Cable swivel collar 1
3 09.231.205 Slotted nut 1
4 65.232.407 Câble swivel body 1
5 65.232.421 Jar tube weldment 1
6 65.232.412 Jar tube 1
7 65.232.415 Overshot head 1
8 65.231.419 Lifting dog 2
9 09.231.417 Pin 1/2” x 2”1/4 1
10 09.232.422 Spring pin 1/4” x 1”1/2 1
11 65.231.411 Locking sleeve 1
12 09.221.220 Grease fitting 1
13 09.221.408 Lock nut 1
14 09.231.408.1 Locking washer 1
15 09.232.314 Full thread screw 1
16 09.222.302 Compression spring 1
17 09.231.206 Cotter pin 3/32” x 1” 1
18 09.231.204 Needle roller bearing 1
N-WL WIRELINE CORE BARRELS
www.mgs.co.uk
23
Qty
3 09.231.205 Slotted nut 1
8 65.231.319 Lifting dog 2
9 09.231.417 Pin 1/2” x 1”15/16 1
10 09.232.422 Spring pin 3/16” x 1”3/8 1
12 09.221.220 Grease fitting 1
13 09.221.408 Lock nut 1
16 09.222.302 Compression spring 1
17 09.231.206 Cotter pin 3/32” x 1” 2
18 09.231.204 Needle roller bearing kit 1
> MAINTENANCE KIT N-WL
> MAINTENANCE OVERSHOT KIT
> KIT CONTENT
- 66.232.401- N-WL complete maintenance overshot kit
13
3
18
17
8
16
9
10
8
12
> N-WL OVERSHOT FOR INCLINED CORE DRILLING
- 65.232.400.10 N-WL Roller overshot
For a core drilling between 30° and 45° the weight of the overshot does not allow a correct sliding. To help you we can propose this roller overshot.
N-WL WIRELINE CORE BARRELS
www.mgs.co.uk
24
> COMPLETE WIRELINE CORE BARREL N-WL UNDERGROUND
> COMPLETE CORE BARREL
1-11 66.301.405 N-WL U core barrel x 5ft
1-11 66.301.410 N-WL U core barrel x 10ft
Qty
1 66.321.401 Complete N-WL U head 1
2 65.221.425 Inner tube x 5FT 1
2 65.221.430 Inner tube x 10FT 1
3 65.221.432 Stop ring 1
4 65.221.433 Core lifter slotted 1
5 65.221.431 Core lifter case 1
6 65.321.434.FH.ST Locking coupling F/H without tang 1
7 37.321.435 Adaptor coupling N-WL U 1
8 65.221.436 Landing ring 1
9 65.221.445 Outer tube x 5Ft 1
9 65.221.450 Outer tube x 10Ft 1
10 65.221.439 Inner tube stabilizer 1
11 65.221.440 Thread protector 1
ACCESSORIES 12 31.710.500.xx Diamond reaming shell 1
13 31.xxx.xxx Coring bit 1
14 37.340.400 Loading chamber (not shown) 1
13 37.321.410 Water swivel compact 1
1
12
13
2
4
3
5
7
8
9
10
11
6
> SPARE PARTS
> COMPLETE INNER TUBE
1-5 66.311.405 N-WL U complete inner tube x 5ft
1-5 66.311.410 N-WL U complete inner tube x 10ft
N-WL WIRELINE CORE BARRELS
www.mgs.co.uk
25
1-19 66.321.401 N-WL U complete head
Qty
Top part N-WL UNDERGROUND
1 37.321.407 op part N-WL U head 1
Lower head assemblyy N-WL UNDERGROUND
2 65.221.409.2 Landing shoulder 1
3 09.221.421 Steel ball Ø7/8” 1
4 09.11.62380 Landing indicator 1
5 65.221.409.3 Lower body 1
6 09.221.410 Lock nut 1
7 65.221.411 Spindle 1
8 09.221.412U Shut off valve 2
9 65.221.413 Valve adjusting washer 2
10 09.221.414 Hanger bearing 1
11 65.221.415 Spindle bearing 1
12 09.221.415.10 Bronze bushing 1
13 09.221.424 Hanger bearing 1
14 09.221.416 Compression spring 1
15 09.221.417 Self lock nut 1
16 65.221.419 Inner tube cap 1
17 09.221.220 Grease itting 1
18 65.221.423 Check valve body 1
19 09.11.62374 Steel ball Ø0.78” 1
N-WL UNDERGROUND WIRELINE COMPLETE HEAD
> SPARE PARTS
2
19
5
6
7
8
8
10
11
4
9
9
12
13
14
15
16
17
3
18
1
N-WL WIRELINE CORE BARRELS
www.mgs.co.uk
26
> COMPLETE N-WL U LOADING CHAMBER
COMPLETE LOADING CHAMBER
1-5 65.340.400 N-WL U loading chamber
Qty
1 65.340.401- Loading chamber body N-WL U 1
2 65.340.502 Packing housing 2
3 09.340.210 Cable packing 1
4 65.340.504 Packing plug 3/16’’ 1
5 09.100.913 Quick coupler 1
1
2
2
4
3
5
> SPARE PARTS
N-WL WIRELINE CORE BARRELS
www.mgs.co.uk
27
1-21 37.330.400- N-WL U overshot
Qty
1 65.231.202 Eye bolt 1
2 65.232.203 Cable swivel collar 1
3 09.231.204 Needle roller bearing kit 1
4 09.231.206 Cotter pin 3/32” x 1” 1
5 09.231.205 Slotted nut 1
6 37.330.401- Cable swivel body 1
7 09.221.220 Grease fitting 1
8 37.330.402- Valve cap 1
9 37.330.403- Overshot axe 1
10 37.321.453 Piston packing 2
11 37.330.405- Spring pin 1
12 09.222.302 Compression spring 1
13 37.330.407- Spring pin 1
14 37.330.408- Overshot head 1
15 65.231.419 Lifting dog 2
16 09.221.421 Steel ball 7/8” 2
17 09.11.62380 Landing indicator 1
18 37.330.409- Spring pin 1
> N-WL UNDERGROUND OVERSHOT> COMPLETE OVERSHOT
> SPARE PARTS1
16
17
16
11
2
4
3
5
7
8
9
12
10
10
6
14
1513
15
18
N-WL WIRELINE CORE BARRELS
www.mgs.co.uk
28
> MAINTENANCE KIT N-WL UNDERGROUND WIRELINE COMPLETE HEAD
Qty
1 - Spare parts spear point device -
2 - Spare parts latch device -
3 37.321.453 Piston packing 4
4 65.221.409.2 Landing shoulder 2
5 09.11.62380 Landing indicator 4
6 09.221.412U Shut off valve 4
7 09.221.414 Hanger bearing 1
8 65.221.415 Spindle bearing 1
9 09.221.424 Hanger bearing 1
10 09.221.417 Self lock nut 1
11 09.221.220 Grease itting 2
> SPARE PARTS
- 66.320.490- N-WL U complete head kit
1
2
3
4
6
6
7
5
9
10
11
8
32
N-WL WIRELINE CORE BARRELS
www.mgs.co.uk
29
> MAINTENANCE KIT N-WL UNDERGROUND OVERSHOT
> SPARE PARTS
- 66.330.495- N-WL U overshot kit
1
23
4
6
6
7
5
9
10
11
8
9
Qty
1 09.231.204 Needle roller bearing kit 1
2 09.231.206 Cotter pin 3/32” x 1” 2
3 09.231.205 Slotted nut 1
4 09.221.220 Grease fitting 1
5 37.330.409- Spring pin 1
6 37.321.453 Piston packing 4
7 09.11.62380 Landing indicator 2
8 09.222.302 Compression spring 1
9 65.231.419 Lifting dog 2
10 37.330.405- Spring pin 1
11 37.330.407- Spring pin 1
N-WL WIRELINE CORE BARRELS
www.mgs.co.uk
30
> SPARE PARTSqtéQty
1 66.220.650* Knuckle head complete EZY-LATCH™ 1
2 65.221.625* Inner tube x 5FT 1
2 65.221.630* Inner tube x 10FT 1
3 65.221.633* Flutted core lifter 1
4 65.221.632* Stop ring 1
5 65.221.631* Core lifter case 1
6 65.221.634.10 Locking coupling HWT F/H 1
7 65.221.635.10 Adaptor coupling 1
8 65.221.636.10 Landing ring 1
9 65.221.645.10 Outer tube x 5Ft 1
9 65.221.650.10 Outer tube x 10Ft 1
10 65.221.639 Inner tube stabilizer 1
11 65.221.640 Thread protector (not design) 1
ACCESSORIES 12 31.710.600.xx Diamond reaming shell 1
13 31.xxx.xxx Coring bit 1
* Note : Item in the complete inner tube
> COMPLETE WIRELINE CORE BARREL P-WL
> COMPLETE CORE BARREL
> COMPLETE INNER TUBE
P-WL WIRELINE CORE BARRELS
1-11 66.202.605.10 P-WL core barrel FULL HOLE x 5ft EZY-LATCH™
1-11 66.202.610.10 P-WL core barrel FULL HOLE x 10ft EZY-LATCH™
- 66.212.605.10 P-WL complete inner tube x 5ft EZY-LATCH™
- 66.212.610.10 P-WL complete inner tube x 10ft EZY-LATCH™1
2
4
3
5
10
6
7
8
9
12
13
www.mgs.co.uk
31
> SPARE PARTS
P-WL WIRELINE KNUCKLE HEAD
> COMPLETE HEAD
1-34 66.220.650 P-WL head assembly “knuckle head” EZY-LATCH™
Qty
New top part EZY-LATCH™
1-3 66.001055 Spearhead point sub assy 1-3
4 65.000974 Housing spearpoint 1
5 09.000688 Ball 1
6 09.000313 Ball spring 1
7 09.000955 Compression head spring 1
8 65.000973 Spring keeper 1
9 65.001052 Lock screw 1
10 09.001053 Cap screw 1
11 65.001084 Washer 1
12 09.001085 Latch spring 1
13 65.000975 Operating sleeve 1
14 65.001069 Latch 2
15 65.001322 Shoulder bolt 2
16 65.001068 Carrier 1
35 09.11.62374 Steel ball Ø0.78” Ø19.8mm 1
Standard lower head assembly
17 65.221.609.12 Landing shoulder 1
18 09.221.421 Steel ball Ø7/8” 22.2mm 1
19 09.11.62380 Landing indicator 1
20 65.221.609.13 Lower body 1
21 09.221.610.11 Lock washer 1
22 09.221.610.10 Lock nut 1
23 65.221.611.10 Spindle 1
24 65.221.613.10 Valve adjusting washer 2
25 09.221.612U.H Shut off valve 2
26 65.221.630.10 Cap bearing 1
27 09.221.514 Hanger bearing 3
28 65.221.615.10 Spindle bearing 1
29 09.221.616.10 Compression spring 1
30 65.221.631.10 Washer 1
31 09.221.617.10 Self lock nut 1
32 65.221.619.20 Inner tube cap 1
33 65.221.623 Check valve body 1
34 09.221.220 Grease fitting 1
1
2
3
4
6
7
5
9
10
11
13
17
35
20
21
22
23
25
25
2612
19
24
24
8
14
16
34
14
15
27
27
28
29
30
31
32
18
33
27
P-WL WIRELINE CORE BARRELS
www.mgs.co.uk
32
> KIT CONTENT
- 66.220.690 P-WL EZY-LATCH™P-WL complete maintenance head kit EZY-LATCH™
> MAINTENANCE KIT P-WL
> MAINTENANCE KNUCKLE HEAD KIT
14-15 66.001.119- EZY-LATCH™ / Latch kit EZY-LATCH™
> LATCH KIT CONTENT
Qty
1-3 65.001055 Spearhead point sub assy 0
5 09.000688 Ball 1
6 09.000313 Ball spring 1
14 65.001069 Latch 4
15 65.001322 Shoulder bolt 2
17 65.221.609.12 Landing shoulder 1
22 09.221.610.10 Lock nut 1
25 09.221.612U.H Shut off valve 4
27 09.221.514 Hanger bearing 3
28 65.221.615.10 Spindle bearing 1
31 09.221.617.10 Self lock nut 1
35 09.221.220 Grease fitting 2
14 65.001069 Latch 2
15 65.001322 Shoulder bolt 2
1
2
3
28
14
17
22
25
27
30
35
15
5
6
P-WL WIRELINE CORE BARRELS
www.mgs.co.uk
33
MAINTENANCE KIT P-WL
> KIT CONTENT
> MAINTENANCE CORE BARREL KIT
Qty
1 65.221.633 Core lifter 20
2 65.221.632 Stop ring 2
3 65.221.631 Core lifter case 4
4 65.221.636.10 Landing ring 2
5 65.221.639 Inner tube stabilizer 2
1-5 66.202.600.10 P-WL complete maintenance core barrel kit
1
2
3
4
5
400 à 500 +/- 0.5
TOLERENCES GENERALES D'USINAGE
DES COTES NON TOLERENCEES
SAUF INDICATIONS
LES ARETES VIVES
SERONT ABATTUES
0 à 50 +/- 0.1
50 à 100 +/- 0.2
100 à 250 +/- 0.3
250 à 400 +/- 0.4
600 à 1000 +/- 0.75
: : : : : :
P-WL WIRELINE CORE BARRELS
www.mgs.co.uk
34
OPTION NON CORING DEVICE FOR WIRELINE CORE BARREL P-WL
> COMPLETE NON CORING BIT KIT
1-14 66.402.620 Complete non coring bit kit x 5ft
> KIT CONTENT
> CONVERSION KIT
Qty
1 65.221.634.50 Locking coupling P/WL PQ TH EUTALOY 1
2 65.221.635.10 Adaptor coupling P/HWT-WL 1
3 65.221.645.10 Outer tube x 5Ft P/HWT-WL 1
4 65.221.640 Protector 1
5 65.221.639 Inner tube stabilizer 1
6 70.1435 Stabilizer sub 1
7 50.426.10 TiRod 60 Cr x 1500 1
8 70.1436 1’’1/2 - 6 UN x 60 PIN sub 1
9 09.221.610.10 Lock nut 1
10 09.221.610.11 Lock washer 1
11 65.221.609.13 Lower body 1
12 65.221.636.10 Landing ring 1
13 65.221.609.12 Landing shoulder 1
14 66.001070 H/P-WL Top part EZYLATCH 1
15 09.11.62374 Steel ball Ø0.78” Ø19.8mm 1
16 09.11.62380 Landing indicator 1
ACCESSORIES - 65.221.634.10 Locking coupling P/HWT-WL F/H 1
- 31.700.206.xxx Coring bit 1
- 31.710.600.xxx Diamond reaming shell 1
- 33.203.106 BULL 1 3’’1/8 tricone 1
Qty
6 70.1435 Stabilizer sub 1
7 50.426.10 Rod 60 Cr x 1500 1
8 70.1436 1’’1/2 - 6 UN x 60 PIN sub 1
If you already have an EZY LATCH head complete core barrel, you just need the parts below :
1
12
2
4
3
5
7
8
9
10
11
6
13
16
15
14
OP
TIO
N
P-WL WIRELINE CORE BARRELS
www.mgs.co.uk
35
> LOCKING COUPLING
> CORE LIFTER
OPTION WIRELINE CORE BARREL P-WL
3 65.221.633.SL Core lifter P-WL slotted
> CORE BARREL EXTENSIONQty
1 65.221.691.10- Inner tube adaptor 1
2 65.221.630 Inner tube x 10FT 1
3 65.221.650.10 Outer tube x 10Ft 1
4 65.221.639 Inner tube stabilizer 1
5 65.221.635.10 Adaptor coupling 1
6 65.221.634.50 Locking coupling EUTALOY P-WL thread
6 65.221.634.11 Locking coupling EUTALOY
6 65.221.634.11.ST* Locking coupling without tang EUTALOY
6 65.221.634.10.ST* Locking coupling without tang FULL HOLE
* Only on request
1
2
3
5
4
40
0à
50
0+
/-0
.5
TO
LE
RE
NC
ES
GE
NE
RA
LE
S D
'US
INA
GE
DE
S C
OT
ES
NO
N T
OL
ER
EN
CE
ES
SA
UF
IND
ICA
TIO
NS
LE
S A
RE
TE
S V
IVE
S
SE
RO
NT
AB
AT
TU
ES
0à
50
+/-
0.1
50
à1
00
+/-
0.2
10
0à
25
0+
/-0
.3
25
0à
40
0+
/-0
.4
60
0 à
10
00
+/-
0.7
5
400 à 500 +/- 0.5
TOLERENCES GENERALES D'USINAGE
DES COTES NON TOLERENCEES
SAUF INDICATIONS
LES ARETES VIVES
SERONT ABATTUES
0 à 50 +/- 0.1
50 à 100 +/- 0.2
100 à 250 +/- 0.3
250 à 400 +/- 0.4
600 à 1000 +/- 0.75
: : : : : :
P-WL WIRELINE CORE BARRELS
www.mgs.co.uk
36
> TP-WL UNDERGROUND WIRELINE COMPLETE HEAD> COMPLETE HEAD
> 1 TO 24 KIT
1-38 66.320.610- P-WL head assembly UNDERGROUND
1-24 66.320.601 P-WL upper part UNDERGROUND
> SPARE PARTSQty
1 65.222.301 Spearhead point 1
2 09.222.302 Spring 1
3 65.222.303 Lock plot 1
4 09.222.305 Spring pin 1
5 65.222.504 Head base 1
6 09.001053 Screw 1
7 65.321.615 Washer 1
8 09.331.630 Compression spring 1
9 09.221.403 Pin 1
10 09.221.503 Pin 2
11 65.321.606 Latch guide 2
12 09.321.605 Latch 2
13 65.321.602 Latch retracting case 1
14 06.G430391 Screw 2
15 65.321.609.1 Upper body 1
16 09.321.611 Shoulder bolt 1
17 65.321.612 Valve retainer 1
18 65.321.610 Indicator ball 1
19 09.11.62380 Landing indicator bushing 1
20 65.321.613 P-WL adaptor 1
21 09.321.653 Piston packing 2
22 65.321.614 Shaft 1
23 65.221.509.3 Lower body 1
24 65.221.609.12 Landing shoulder 1
25 09.221.510 Hex nut 1
26 65.221.511 Spindle 1
27 65.221.613.10 Valve adjusting washer 2
28 09.221.612U.H Shut off valve 2
29 65.221.630.10 Cap bearing 1
30 09.221.514 Hanger bearing 3
31 65.221.615.10 pindle bearing 1
32 09.221.616.10 Compression spring 1
33 65.221.631.10 Washer 1
34 09.221.517 Self lock nut 1
35 65.221.619.20 Inner tube cap 1
36 09.221.421 Steel ball Ø7/8” Ø22.2mm 1
37 65.221.623 Check valve body 1
38 09.221.220 Grease itting 1
1 2
34
67
5
9
10
11
14
17
20
21
22
23
26
27
28
12
19
25
27
8
16
35
14
15
28
29
30
31
30
32
33
18
34
13
37
36
24
38
P-WL WIRELINE CORE BARRELS
www.mgs.co.uk
37
> SPARE PARTS
> P-WL UNDERGROUND OVERSHOT> COMPLETE OVERSHOT
Qty
1 65.231.202 Eye bolt 1
2 65.232.203 Cable swivel collar 1
3 09.231.204 Needle roller bearing 1
4 09.231.205 Castle nut 1
5 65.232.710 Adaptor 1
6 09.221.220 Grease itting 1
7 65.331.523 Upper part 1
8 65.331.629 Shaft 1
9 09.321.448 O’ring 2
10 09.331.530 Compression spring 1
11 65.331.532 Pin 1
12 65.331.617 Goupille - Pin 1
13 09.222.302 Compression spring 1
14 65.331.515 Overshot head 1
15 65.331.519 Lifting dog 2
16 65.331.633 Guide 1
17 65.331.531 Body 1
18 65.321.654 Washer 1
19 09.321.653 Piston packing 1
20 65.321.655 Washer 1
21 09.221.610.10 Hex nut 1
22 09.231.206 Goupille épingle - Cotter pin 1
1
2
3
4
56
7
8
9
10
11
1312
15
16
14
17
18
19
20
21
15
22
1-22 66.330.600 P-WL U overshot
> COMPLETE P-WL U LOADING CHAMBER
> COMPLETE LOADING CHAMBER
1
2
2
4
3
5
> SPARE PARTS
1-5 65.340.600- P-WL U loading chamber
Qty
1 65.340.601- Loading chamber body P-WL U 1
2 65.340.502- Packing housing 2
3 65.340.503- Cable packing 1
4 65.340.504- Packing plug 3/16’’ 1
5 65.340.505- Quick coupler 1
P-WL WIRELINE CORE BARRELSwww.mgs.co.uk
38
* Note : Item in the complete inner tube
P-WL TRIPLEx OPTION (P-WL3) - WITH SPLIT TUBE> CONVERSION KIT CORE BARREL P-WL TO P-WL 3
> SPARE PARTSQty
1 66.220.650* Knuckle head complete EZY-LATCH™ 1
2 65.221.625* Inner tube x 5FT 1
2 65.221.630* Inner tube x 10FT 1
3 65.421.633* P-WL3 fluted core lilfter 1
4 65.421.632* P-WL3 stop ring 1
5 65.421.631* P-WL3 core lifter case 1
6 65.221.634.10 Locking coupling HWT F/H 1
7 65.221.635.10 Adaptor coupling 1
8 65.221.636.10 Landing ring 1
9 65.221.645.10 Outer tube x 5Ft 1
9 65.221.650.10 Outer tube x 10Ft 1
10 65.221.639 Inner tube stabilizer 1
11 65.221.640 Thread protector 1
12 09.421.626* O-ring 1
13 65.421.627* Piston 1
14 65.421.628* Split tube x 5ft 1
14 65.421.629* Split tube x 10ft 1
ACCESSORIES
15 31.710.600.xx Diamond reaming shell 1
16 31.xxx.xxx Coring bit 1
> COMPLETE CORE BARREL
> COMPLETE INNER TUBE
3-4-5-12-13-14 66.421.601 Conversion kit core barrel P-WL --> P-WL 3 x 5Ft
3-4-5-12-13-14 66.421.602 Conversion kit core barrel H-WL --> H-WL 3 x 10Ft
1-11 66.402.650- P-WL 3 core barrel x 5ft EZY-LATCH™
1-11 66.402.660 P-WL 3 core barrel x 10ft EZY-LATCH™
- 66.412.650 P-WL 3 complete inner tube x 5ft EZY-LATCH™
- 66.412.660 P-WL 3 complete inner tube x 10ft EZY-LATCH™
1
12
2
4
13
14
3
5
6
7
8
9
10
11
15
16
400 à 500 +/- 0.5
TOLERENCES GENERALES D'USINAGE
DES COTES NON TOLERENCEES
SAUF INDICATIONS
LES ARETES VIVES
SERONT ABATTUES
0 à 50 +/- 0.1
50 à 100 +/- 0.2
100 à 250 +/- 0.3
250 à 400 +/- 0.4
600 à 1000 +/- 0.75
: : : : : :
40
0à
50
0+
/-0
.5
TO
LE
RE
NC
ES
GE
NE
RA
LE
S D
'US
INA
GE
DE
S C
OT
ES
NO
N T
OL
ER
EN
CE
ES
SA
UF
IND
ICA
TIO
NS
LE
S A
RE
TE
S V
IVE
S
SE
RO
NT
AB
AT
TU
ES
0à
50
+/-
0.1
50
à1
00
+/- 0
.2
10
0à
25
0+
/-0
.3
25
0à
40
0+
/-0
.4
60
0 à
10
00
+/-
0.7
5
P-WL WIRELINE CORE BARRELS
www.mgs.co.uk
39
> LOCKING COUPLING
> OPTION WIRELINE CORE BARREL P-WL 3 - WITH SPLIT TUBE
> OPTION WIRELINE CORE BARREL P-WL 3 - WITH PLASTIC LINER
> CORE LIFTER
66.421.637 Kit pump out P-WL3 (pump out adaptor 65.421.637 + Piston plug 65.421.338)
37.0915.30 Plastic liner P-WL x 1500
37.0905.30 Plastic liner P-WL x 3000
The core
3 65.221.633.SL Core lifter P-WL slotted
6 65.221.634.1 Locking coupling EUTALOY
6 65.221.634.1.ST* Locking coupling without tang EUTALOY
6 65.221.634.10.ST* Locking coupling without tang FULL HOLE
The standard P-WL core barrels can be easily converted to the Triplex version using a split triple inner tube. To convert the core barrel you have to add in the inner tube assembly: the O-ring, the piston and the split third inner tube. And you have to replace the stop-ring, the core lifter, the core lifter case and the coring bit. The triplex option can be made with a plastic liner as well, in this case, the split tube, the piston and the o-ring are replaced by the liner.
* : Only on request
Kit pump out
Water pump
P-WL WIRELINE CORE BARRELS
www.mgs.co.uk
40
1-19 65.232.610 P-WL overshot
> P-WL OVERSHOT> COMPLETE OVERSHOT
> SPARE PARTSQty
1 65.231.202 Eye bolt 1
2 65.232.203 Câble swivel collar 1
3 09.231.205 Slotted nut 1
4 65.232.407 Cable swivel body 1
5 65.232.421 Jar tube weldment 1
6 65.232.412 Jar tube 1
7 65.232.515 Overshot head 1
8 65.231.419 Lifting dog 2
9 09.231.517 Pin 1/2” x 2”1/4 1
10 09.232.422 Spring pin 1/4” x 1”1/2 1
11 65.231.411 Locking sleeve 1
12 09.221.220 Grease fitting 1
13 09.221.408 Lock nut 1
14 09.231.408.1 Locking washer 1
15 09.232.314 Full thread srew 2
16 09.222.302 Compression spring 1
17 09.231.206 Cotter pin 3/32” x 1” 1
18 09.231.204 Needle roller bearing 1
19 65.231.620 Centering ring 1
1
2
318
17
12
4
6
5
11
13
7
9
10
8
8
14
15
16
15 19
P-WL WIRELINE CORE BARRELS
www.mgs.co.uk
41
> MAINTENANCE KIT P-WL
> MAINTENANCE OVERSHOT KIT
- 66.232.501 H/P-WL complete maintenance overshot kit
Qty
3 09.231.205 Slotted nut 1
8 65.231.419 Lifting dog 2
9 09.231.517 Pin 1/2” x 2”1/4 1
10 09.232.422 Spring pin 3/16” x 1”3/8 1
12 09.221.220 Grease fitting 1
13 09.221.408 Lock nut 1
16 09.222.302 Compression spring 1
17 09.231.206 Cotter pin 3/32” x 1” 2
18 09.231.204 Needle roller bearing kit 1
> KIT CONTENT
13
3
18
17
8
16
9
10
8
12
P-WL WIRELINE CORE BARRELS
www.mgs.co.uk
Marton Geotechnical Services Ltd +44 (0) 1359 271167
www.mgs.co.uk e info@mgs.co.uk t +44(0)1359 271167Specifications may change without prior notice
05/2019 V1.0
Recommended