View
224
Download
2
Category
Preview:
Citation preview
ALWAYS READ AND FOLLOW LABEL DIRECTIONS.© Copyright BASF 2017 ® Registered trademark of BASF. W213162 08.2017
Grouting andAnchoring Systems
The data contained in this publication are based on our current knowledge and experience. They do not constitute the agreed contractual quality of the product and, in view of the many factors that may affect processing and application of our products, do not relieve processors from carrying out their own investigations and tests. The agreed contractual quality of the product at the time of transfer of risk is based solely on the data in the specifi cation data sheet. Any descriptions, drawings, photographs, data, proportions, weights, etc. given in this publication may change without prior information. It is the responsibility of the recipient of our product to ensure that any proprietary rights and existing laws and legislation are observed (10/2015).® = registered trademark of BASF group in many countries
Australia1300 227 300 (1300 BASF 00)www.master-builders-solutions.basf.com.au
New Zealand0800 334 877www.master-builders-solutions.basf.co.nz
MasterAir®
Complete solutions for air entrained concrete
MasterBrace®
Solutions for concrete strengthening
MasterCast®
Solutions for the manufactured concrete product industry
MasterCem®
Solutions for cement manufacture
MasterEase®
Low viscosity for high performance concrete
MasterEmaco®
Solutions for concrete repair
MasterFinish®
Solutions for formwork treatment and surface improvement
MasterFlow®
Solutions for precision grouting
MasterFiber®
Comprehensive solutions for fi ber reinforced concrete
MasterGlenium®
Solutions for high performance concrete
MasterInject®
Solutions for concrete injection
MasterKure®
Solutions for concrete curing
MasterLife®
Solutions for enhanced durability
MasterMatrix®
Advanced rheology control for concrete
MasterPel®
Solutions for water tight concrete
MasterPolyheed®
Solutions for mid-range concrete
MasterPozzolith®
Solutions for water-reduced concrete
MasterProtect®
Solutions for concrete protection
MasterRheobuild®
Solutions for high strength concrete
MasterRoc®
Solutions for underground construction
MasterSeal®
Solutions for waterproofi ng and sealing
MasterSet®
Solutions for set control
MasterSure®
Solutions for extraordinary workability retention
MasterTop®
Solutions for industrial and commercial fl oors
Master X-Seed®
Advanced accelerator solutions for concrete
Ucrete®
Flooring solutions for harsh environments
Master Builders Solutions from BASF for the Construction Industry
Gro
uti
ng
Pro
du
ct S
elec
tio
n G
uid
eA
pp
licat
ion
Des
crip
tio
nB
rand
Nam
eTe
chno
log
y
Pile Caps
High Dynamic Loads
Fast Return to Service
Non Hydrogen Generating
Dry Pack
Thick Section Grouting
High Chemical Resistance
High Flow Long Open Time
Met
allic
Agg
rega
te P
reci
sion
Mas
terF
low
® 4
600,
9300
Cem
entit
ious
ll
l
Nat
ural
Agg
rega
te P
reci
sion
Mas
terF
low
® 8
10, 4
500,
950
0C
emen
titio
usl
ll
Nat
ural
Agg
rega
te G
ener
al P
urp
ose
Mas
terF
low
® 7
00C
emen
titio
us l
l
Nat
ural
Agg
rega
te L
ow E
xoth
erm
Mas
terF
low
® 8
15, 4
510
Cem
entit
ious
ll
Non
Agg
rega
te C
able
Gro
utM
aste
rFlo
w®
816
Cem
entit
ious
l
Hig
h Fl
ow N
on A
ggre
gate
Mas
terF
low
® 6
18E
pox
yl
ll
Hig
h Fl
ow A
ggre
gate
Fill
edM
aste
rFlo
w®
648
Ep
oxy
ll
ll
Hig
h Fl
ow L
ow E
xoth
erm
Mas
terF
low
® 6
78E
pox
yl
ll
l
213162_CONST_GROUTING_&_ANCHORING_SYS_BRO_6pp.indd 1 15/8/17 3:44 pm
Grouting and Anchoring Systems
Grouts are versatile construction materials used for structural stabilization and load transfer. Master Builder Solutions offers a complete line of cementitious and polymer-based grouting materials for precision machinery, grouting and anchoring.
The MasterFlow® range of construction grouts from Master Builders Solutions has evolved through over 80 years of innovation and product development. As engineering demands have increased, so have demands on grouts. Precision, dimensional stability, durability and toughness are essential qualities supplied by our products. In response to the growing requirement for specific chemical resistance properties, the technology of MasterFlow® grouts has continued to evolve, providing the engineer with the vital link between equipment and ground for all types of construction.
Our product range also includes injection grouts for stopping water ingress, vibration dampening grouts for light rail and tramways, together with a range of specialist grouts. Strength and performance you can rely on.
The Master Builders Solutions brand brings all of BASF’sexpertise together to create chemical solutions for newconstruction, maintenance, repair and renovation of structures. Master Builders Solutions is built on the experience gained from more than a century in the construction industry. The know-how and experience of a global community of BASF construction experts form the core of Master Builders Solutions. We combine the right elements from our portfolio to solve your specific construction challenges. We collaborate across areas of expertise and regions and draw on the experience gained
from countless construction projects worldwide. We leverage global BASF technologies, as well as our in-depth knowledge of local building needs, to develop innovations that help make you more successful and drive sustainable construction. The comprehensive portfolio under the Master Builders Solutions brand encompasses concrete admixtures, cement additives, chemical solutions for underground construction, waterproofing solutions, sealants, concrete repair & protection solutions, performance grouts, performance flooring solutions.
Master Builders Solutions from BASF
MasterFlow® Cementitious Grouts
The MasterFlow® Cementitious grout range incorporates high flow high strength metallic aggregate grouts with dual-phase shrinkage compensation to ensure long term performance. This unique product combines the malleability of the specially treated cast iron aggregate and high early and ultimate strength to deliver a grout that is ideally suited for machinery subject to constant dynamic loading.
High flow, high strength, long working time natural aggregate grout with dual phase shrinkage compensation, ensures long term performance in all types of critical machinery grouting. This product sets the standard for natural aggregate precision grouts. High flow, mid strength natural aggregate shrinkage compensated grouts are ideal for areas where lower strength and load transfer is required. These grouts are suitable for bulking out with aggregates to allow for very thick pours without compromising on flow or strength.
Flowable and dry packable low strength grouts are suitable for all types of general purpose grouting activities. The ability to dry pack makes these grouts very versatile and able to be used in many areas.
Other grouts include a non hydrogen generating cable grout that has been specifically developed to meet the needs of a number of specialist installations.
The MasterFlow® range also includes grout additives to allow the production of high quality shrinkage controlled grouts on site. The range allows many types for grout to be produced, from cable and anchoring grouts, to high flow or dry pack grouts.
MasterFlow® Resin Grouts
MasterFlow® Resin grouts range features high flow thin section grouts for machine bases where high strength gain and fast return to service are essential. These grouts can be extended with aggregate to allow thicker pours where necessary and are a first choice when the anchoring of critical equipment is desired.
Adjustable flow aggregate filled medium section grouts are ideal for all critical grouting environments where fast strength gain and chemical resistance are an issue. These grouts are able to withstand awide temperature range, making them the ideal choice for many processing and petrochemical environments.
Adjustable flow low exotherm thick section grouts have been specifically developed for chocking and thick section regrouting, allowing the engineer to return the machine to service, even if the grout bed is as thick as 500mm - a problem for both normal resin and cementitious grouts. These grouts can be used for many anchoring applications including hold down bolts, stays and cable anchors.
Master Builder SolutionsGrouting and Anchoring Systems
Master Builder SolutionsGrouting and Anchoring Systems
213162_CONST_GROUTING_&_ANCHORING_SYS_BRO_6pp.indd 2 15/8/17 3:44 pm
Grouting and Anchoring Systems
Grouts are versatile construction materials used for structural stabilization and load transfer. Master Builder Solutions offers a complete line of cementitious and polymer-based grouting materials for precision machinery, grouting and anchoring.
The MasterFlow® range of construction grouts from Master Builders Solutions has evolved through over 80 years of innovation and product development. As engineering demands have increased, so have demands on grouts. Precision, dimensional stability, durability and toughness are essential qualities supplied by our products. In response to the growing requirement for specific chemical resistance properties, the technology of MasterFlow® grouts has continued to evolve, providing the engineer with the vital link between equipment and ground for all types of construction.
Our product range also includes injection grouts for stopping water ingress, vibration dampening grouts for light rail and tramways, together with a range of specialist grouts. Strength and performance you can rely on.
The Master Builders Solutions brand brings all of BASF’sexpertise together to create chemical solutions for newconstruction, maintenance, repair and renovation of structures. Master Builders Solutions is built on the experience gained from more than a century in the construction industry. The know-how and experience of a global community of BASF construction experts form the core of Master Builders Solutions. We combine the right elements from our portfolio to solve your specific construction challenges. We collaborate across areas of expertise and regions and draw on the experience gained
from countless construction projects worldwide. We leverage global BASF technologies, as well as our in-depth knowledge of local building needs, to develop innovations that help make you more successful and drive sustainable construction. The comprehensive portfolio under the Master Builders Solutions brand encompasses concrete admixtures, cement additives, chemical solutions for underground construction, waterproofing solutions, sealants, concrete repair & protection solutions, performance grouts, performance flooring solutions.
Master Builders Solutions from BASF
MasterFlow® Cementitious Grouts
The MasterFlow® Cementitious grout range incorporates high flow high strength metallic aggregate grouts with dual-phase shrinkage compensation to ensure long term performance. This unique product combines the malleability of the specially treated cast iron aggregate and high early and ultimate strength to deliver a grout that is ideally suited for machinery subject to constant dynamic loading.
High flow, high strength, long working time natural aggregate grout with dual phase shrinkage compensation, ensures long term performance in all types of critical machinery grouting. This product sets the standard for natural aggregate precision grouts. High flow, mid strength natural aggregate shrinkage compensated grouts are ideal for areas where lower strength and load transfer is required. These grouts are suitable for bulking out with aggregates to allow for very thick pours without compromising on flow or strength.
Flowable and dry packable low strength grouts are suitable for all types of general purpose grouting activities. The ability to dry pack makes these grouts very versatile and able to be used in many areas.
Other grouts include a non hydrogen generating cable grout that has been specifically developed to meet the needs of a number of specialist installations.
The MasterFlow® range also includes grout additives to allow the production of high quality shrinkage controlled grouts on site. The range allows many types for grout to be produced, from cable and anchoring grouts, to high flow or dry pack grouts.
MasterFlow® Resin Grouts
MasterFlow® Resin grouts range features high flow thin section grouts for machine bases where high strength gain and fast return to service are essential. These grouts can be extended with aggregate to allow thicker pours where necessary and are a first choice when the anchoring of critical equipment is desired.
Adjustable flow aggregate filled medium section grouts are ideal for all critical grouting environments where fast strength gain and chemical resistance are an issue. These grouts are able to withstand awide temperature range, making them the ideal choice for many processing and petrochemical environments.
Adjustable flow low exotherm thick section grouts have been specifically developed for chocking and thick section regrouting, allowing the engineer to return the machine to service, even if the grout bed is as thick as 500mm - a problem for both normal resin and cementitious grouts. These grouts can be used for many anchoring applications including hold down bolts, stays and cable anchors.
Master Builder SolutionsGrouting and Anchoring Systems
Master Builder SolutionsGrouting and Anchoring Systems
213162_CONST_GROUTING_&_ANCHORING_SYS_BRO_6pp.indd 2 15/8/17 3:44 pm
Grouting and Anchoring Systems
Grouts are versatile construction materials used for structural stabilization and load transfer. Master Builder Solutions offers a complete line of cementitious and polymer-based grouting materials for precision machinery, grouting and anchoring.
The MasterFlow® range of construction grouts from Master Builders Solutions has evolved through over 80 years of innovation and product development. As engineering demands have increased, so have demands on grouts. Precision, dimensional stability, durability and toughness are essential qualities supplied by our products. In response to the growing requirement for specific chemical resistance properties, the technology of MasterFlow® grouts has continued to evolve, providing the engineer with the vital link between equipment and ground for all types of construction.
Our product range also includes injection grouts for stopping water ingress, vibration dampening grouts for light rail and tramways, together with a range of specialist grouts. Strength and performance you can rely on.
The Master Builders Solutions brand brings all of BASF’sexpertise together to create chemical solutions for newconstruction, maintenance, repair and renovation of structures. Master Builders Solutions is built on the experience gained from more than a century in the construction industry. The know-how and experience of a global community of BASF construction experts form the core of Master Builders Solutions. We combine the right elements from our portfolio to solve your specific construction challenges. We collaborate across areas of expertise and regions and draw on the experience gained
from countless construction projects worldwide. We leverage global BASF technologies, as well as our in-depth knowledge of local building needs, to develop innovations that help make you more successful and drive sustainable construction. The comprehensive portfolio under the Master Builders Solutions brand encompasses concrete admixtures, cement additives, chemical solutions for underground construction, waterproofing solutions, sealants, concrete repair & protection solutions, performance grouts, performance flooring solutions.
Master Builders Solutions from BASF
MasterFlow® Cementitious Grouts
The MasterFlow® Cementitious grout range incorporates high flow high strength metallic aggregate grouts with dual-phase shrinkage compensation to ensure long term performance. This unique product combines the malleability of the specially treated cast iron aggregate and high early and ultimate strength to deliver a grout that is ideally suited for machinery subject to constant dynamic loading.
High flow, high strength, long working time natural aggregate grout with dual phase shrinkage compensation, ensures long term performance in all types of critical machinery grouting. This product sets the standard for natural aggregate precision grouts. High flow, mid strength natural aggregate shrinkage compensated grouts are ideal for areas where lower strength and load transfer is required. These grouts are suitable for bulking out with aggregates to allow for very thick pours without compromising on flow or strength.
Flowable and dry packable low strength grouts are suitable for all types of general purpose grouting activities. The ability to dry pack makes these grouts very versatile and able to be used in many areas.
Other grouts include a non hydrogen generating cable grout that has been specifically developed to meet the needs of a number of specialist installations.
The MasterFlow® range also includes grout additives to allow the production of high quality shrinkage controlled grouts on site. The range allows many types for grout to be produced, from cable and anchoring grouts, to high flow or dry pack grouts.
MasterFlow® Resin Grouts
MasterFlow® Resin grouts range features high flow thin section grouts for machine bases where high strength gain and fast return to service are essential. These grouts can be extended with aggregate to allow thicker pours where necessary and are a first choice when the anchoring of critical equipment is desired.
Adjustable flow aggregate filled medium section grouts are ideal for all critical grouting environments where fast strength gain and chemical resistance are an issue. These grouts are able to withstand awide temperature range, making them the ideal choice for many processing and petrochemical environments.
Adjustable flow low exotherm thick section grouts have been specifically developed for chocking and thick section regrouting, allowing the engineer to return the machine to service, even if the grout bed is as thick as 500mm - a problem for both normal resin and cementitious grouts. These grouts can be used for many anchoring applications including hold down bolts, stays and cable anchors.
Master Builder SolutionsGrouting and Anchoring Systems
Master Builder SolutionsGrouting and Anchoring Systems
213162_CONST_GROUTING_&_ANCHORING_SYS_BRO_6pp.indd 2 15/8/17 3:44 pm
ALWAYS READ AND FOLLOW LABEL DIRECTIONS.© Copyright BASF 2017 ® Registered trademark of BASF. W213162 08.2017
Grouting andAnchoring Systems
The data contained in this publication are based on our current knowledge and experience. They do not constitute the agreed contractual quality of the product and, in view of the many factors that may affect processing and application of our products, do not relieve processors from carrying out their own investigations and tests. The agreed contractual quality of the product at the time of transfer of risk is based solely on the data in the specifi cation data sheet. Any descriptions, drawings, photographs, data, proportions, weights, etc. given in this publication may change without prior information. It is the responsibility of the recipient of our product to ensure that any proprietary rights and existing laws and legislation are observed (10/2015).® = registered trademark of BASF group in many countries
Australia1300 227 300 (1300 BASF 00)www.master-builders-solutions.basf.com.au
New Zealand0800 334 877www.master-builders-solutions.basf.co.nz
MasterAir®
Complete solutions for air entrained concrete
MasterBrace®
Solutions for concrete strengthening
MasterCast®
Solutions for the manufactured concrete product industry
MasterCem®
Solutions for cement manufacture
MasterEase®
Low viscosity for high performance concrete
MasterEmaco®
Solutions for concrete repair
MasterFinish®
Solutions for formwork treatment and surface improvement
MasterFlow®
Solutions for precision grouting
MasterFiber®
Comprehensive solutions for fi ber reinforced concrete
MasterGlenium®
Solutions for high performance concrete
MasterInject®
Solutions for concrete injection
MasterKure®
Solutions for concrete curing
MasterLife®
Solutions for enhanced durability
MasterMatrix®
Advanced rheology control for concrete
MasterPel®
Solutions for water tight concrete
MasterPolyheed®
Solutions for mid-range concrete
MasterPozzolith®
Solutions for water-reduced concrete
MasterProtect®
Solutions for concrete protection
MasterRheobuild®
Solutions for high strength concrete
MasterRoc®
Solutions for underground construction
MasterSeal®
Solutions for waterproofi ng and sealing
MasterSet®
Solutions for set control
MasterSure®
Solutions for extraordinary workability retention
MasterTop®
Solutions for industrial and commercial fl oors
Master X-Seed®
Advanced accelerator solutions for concrete
Ucrete®
Flooring solutions for harsh environments
Master Builders Solutions from BASF for the Construction Industry
Gro
uti
ng
Pro
du
ct S
elec
tio
n G
uid
eA
pp
licat
ion
Des
crip
tio
nB
rand
Nam
eTe
chno
log
y
Pile Caps
High Dynamic Loads
Fast Return to Service
Non Hydrogen Generating
Dry Pack
Thick Section Grouting
High Chemical Resistance
High Flow Long Open Time
Met
allic
Agg
rega
te P
reci
sion
Mas
terF
low
® 4
600,
9300
Cem
entit
ious
ll
l
Nat
ural
Agg
rega
te P
reci
sion
Mas
terF
low
® 8
10, 4
500,
950
0C
emen
titio
usl
ll
Nat
ural
Agg
rega
te G
ener
al P
urp
ose
Mas
terF
low
® 7
00C
emen
titio
us l
l
Nat
ural
Agg
rega
te L
ow E
xoth
erm
Mas
terF
low
® 8
15, 4
510
Cem
entit
ious
ll
Non
Agg
rega
te C
able
Gro
utM
aste
rFlo
w®
816
Cem
entit
ious
l
Hig
h Fl
ow N
on A
ggre
gate
Mas
terF
low
® 6
18E
pox
yl
ll
Hig
h Fl
ow A
ggre
gate
Fill
edM
aste
rFlo
w®
648
Ep
oxy
ll
ll
Hig
h Fl
ow L
ow E
xoth
erm
Mas
terF
low
® 6
78E
pox
yl
ll
l
213162_CONST_GROUTING_&_ANCHORING_SYS_BRO_6pp.indd 1 15/8/17 3:44 pm
ALWAYS READ AND FOLLOW LABEL DIRECTIONS.© Copyright BASF 2017 ® Registered trademark of BASF. W213162 08.2017
Grouting andAnchoring Systems
The data contained in this publication are based on our current knowledge and experience. They do not constitute the agreed contractual quality of the product and, in view of the many factors that may affect processing and application of our products, do not relieve processors from carrying out their own investigations and tests. The agreed contractual quality of the product at the time of transfer of risk is based solely on the data in the specifi cation data sheet. Any descriptions, drawings, photographs, data, proportions, weights, etc. given in this publication may change without prior information. It is the responsibility of the recipient of our product to ensure that any proprietary rights and existing laws and legislation are observed (10/2015).® = registered trademark of BASF group in many countries
Australia1300 227 300 (1300 BASF 00)www.master-builders-solutions.basf.com.au
New Zealand0800 334 877www.master-builders-solutions.basf.co.nz
MasterAir®
Complete solutions for air entrained concrete
MasterBrace®
Solutions for concrete strengthening
MasterCast®
Solutions for the manufactured concrete product industry
MasterCem®
Solutions for cement manufacture
MasterEase®
Low viscosity for high performance concrete
MasterEmaco®
Solutions for concrete repair
MasterFinish®
Solutions for formwork treatment and surface improvement
MasterFlow®
Solutions for precision grouting
MasterFiber®
Comprehensive solutions for fi ber reinforced concrete
MasterGlenium®
Solutions for high performance concrete
MasterInject®
Solutions for concrete injection
MasterKure®
Solutions for concrete curing
MasterLife®
Solutions for enhanced durability
MasterMatrix®
Advanced rheology control for concrete
MasterPel®
Solutions for water tight concrete
MasterPolyheed®
Solutions for mid-range concrete
MasterPozzolith®
Solutions for water-reduced concrete
MasterProtect®
Solutions for concrete protection
MasterRheobuild®
Solutions for high strength concrete
MasterRoc®
Solutions for underground construction
MasterSeal®
Solutions for waterproofi ng and sealing
MasterSet®
Solutions for set control
MasterSure®
Solutions for extraordinary workability retention
MasterTop®
Solutions for industrial and commercial fl oors
Master X-Seed®
Advanced accelerator solutions for concrete
Ucrete®
Flooring solutions for harsh environments
Master Builders Solutions from BASF for the Construction Industry
Gro
uti
ng
Pro
du
ct S
elec
tio
n G
uid
eA
pp
licat
ion
Des
crip
tio
nB
rand
Nam
eTe
chno
log
y
Pile Caps
High Dynamic Loads
Fast Return to Service
Non Hydrogen Generating
Dry Pack
Thick Section Grouting
High Chemical Resistance
High Flow Long Open Time
Met
allic
Agg
rega
te P
reci
sion
Mas
terF
low
® 4
600,
9300
Cem
entit
ious
ll
l
Nat
ural
Agg
rega
te P
reci
sion
Mas
terF
low
® 8
10, 4
500,
950
0C
emen
titio
usl
ll
Nat
ural
Agg
rega
te G
ener
al P
urp
ose
Mas
terF
low
® 7
00C
emen
titio
us l
l
Nat
ural
Agg
rega
te L
ow E
xoth
erm
Mas
terF
low
® 8
15, 4
510
Cem
entit
ious
ll
Non
Agg
rega
te C
able
Gro
utM
aste
rFlo
w®
816
Cem
entit
ious
l
Hig
h Fl
ow N
on A
ggre
gate
Mas
terF
low
® 6
18E
pox
yl
ll
Hig
h Fl
ow A
ggre
gate
Fill
edM
aste
rFlo
w®
648
Ep
oxy
ll
ll
Hig
h Fl
ow L
ow E
xoth
erm
Mas
terF
low
® 6
78E
pox
yl
ll
l
213162_CONST_GROUTING_&_ANCHORING_SYS_BRO_6pp.indd 1 15/8/17 3:44 pm
Recommended