View
11
Download
0
Category
Preview:
Citation preview
GRUNDFOS HORIZONTAL SPLITCASE PUMPSThe Reliable & efficienT WoRkhoRse
GRUnDfos HS PUMPS
IntroductIon The Grundfos HS horizontal splitcase pump is an unstop-pable workhorse. The HS delivers high efficiency perform-ance and low life-cycle costs. The highly reliable hydraulic design combined with the service-friendly layout of the splitcase housing assures maximum benefits for the user. All HS pumps are tested to ensure the performance require-ments are achieved prior to delivery. The HS is a well-built, reliable splitcase pump proudly offered by Grundfos – the splitcase pump market leaders!
Technical DataFlow, Q: 10 to 2500m3/hrHead, H: 5 to 148mMotor, range: 1.5 – 600kWMotor, cycles: 50 Hzoperating Pressure: 16 bar, max.Liquid temperature: up to 100°cdischarge Sizes: 50 – 350mmImpeller Sizes: 242 – 630mm
Applicationsthe Grundfos HS pumps are used in these main fields of application:
Commercial systems• Air-conditioningandchilledwatersystem• Watercondensingsystemsandcoolingtowers• Districtheatingplantsandheatingsystems
Industrial systems• Processcoolingandchilledwatersystems• Industrialheatingsystems• Washdownandcleaningsystems
Water distribution• Publicwaterworks• Non-potablewatersystems
Irrigation and agriculture• Fieldirrigation(flooding)• Sprinklerirrigation
PuMP dEScrIPtIon• Thepumpsarenon-self-priming,centrifugalvolute pumps with radial suction and radial discharge ports and horizontal shaft.
• SuctionanddischargeflangesarePN16accordingto EN1092-2(DIN2501).
• Thepumpislong-coupledwithatotallyenclosedfan- cooled standard motor with main dimensions to IEc and dIn standards and mounting designation B3 (IM1001).
• Themechanicalshaftsealhasdimensionsaccording to En 12756.
• Therotatingassemblyisdynamicallybalanced according to ISo 1940 class G6.3.
• Impellersaredoublesuctionprovidinglongoperating, corrosion free life. Impellers are constructed in ASTMB584bronzeandarehydraulicallybalanced.
• GrundfosHSpumpsareavailableinthreedifferent variants:1. Pump with motor and base frame.2. Bare shaft pump with base frame.3. Bare shaft pump; ie pump without motor and without base frame.
• Thesplit-caseconstructionenablesremovaland dismantling of the internal pump parts, e.g. bearings, wear rings, impeller and shaft seal, without disturbing the motor and pipework.
• Replaceablecasewearringsprotectthepumpcasing while reducing maintenance costs and maintaining high operating efficiencies.
• Pumpandmotoraremountedonacommonbase frameintheformofawelded,steelC-channelprofile.
• Bronzeshaftsleevesprotecttheshaftandhelpwith fixation of the impeller.
SELLINGFEATURES Pump casing• Compensateddoublevolutedesignvirtuallyeliminates radial forces caused by a hydraulic imbalance inherent inpumpvolutes• Doublevolutedesignextendssealandbearinglife, minimizingnoiseandvibration,andimproving operating efficiency – meaning less wear and lower maintenance costs
Bearing Housing• Grundfos superior design combines seal and bearing chamberstoallowinspectionwithoutremovingthetop halfofthepumpcasing–savingtime,reducingtheuse of lifting equipment, and decreasing the safety risk• Compact,robusthousingconstructionhasa360-degree machinedfitandlimitsshaftdeflectionandoptimizes alignment
Impeller• Extendedvanesandenlargedeyecontributetoa reductioninvibrationandnoise
Coupling• Grundfosspecifiedgridcouplingdesignedtomeetthe pumptorquerequirementsprovideslongservicelife and reduced maintenance costs
Motor
Base plate
Impeller
Pump housing
Couplingguard-stainlesssteel
Coupling-Grid
Shaft
Wear ring
Bearing housing
Shaftsleeve
Shaft seal
Bearing
20 25 30 40 50 60 80 100 150 200 250 300 400 500Q [m�/h]
10
14
20
30
40
50
60
80
100
120
140
[m]H
HS
2-pole, 50 HzVers ion 5
125- 100-305
125- 100-280100-80-24265-50-242
20 30 40 50 60 80 100 150 200 300 400 500 600 800 1000 1500 2000 3000Q [m�/h]
4
56
8
10
15
20
2530
40
5060
80
100
150
200
[m]H
HS
4-pole, 50 HzVers ion 5
400-350-397
350-250-630
350-250-498
300-250-381
300-250-305
300-200-489
250-200-381
250-200-305
200-150-508200-150-483
200-150-381
200-150-305C
200-150-305A
1 50-1 25-381
150-125-305
125-100-381
125-100-305
125-100-280
100-80-356
100-80-242
65-50-331
65-50-242
60 80 100 150 200 300 400 500 600 800 1000 1500 2000 2500Q [m�/h]
4
5
6
7
8
10
15
20
30
40
50
60
70[m]H
HS
6-pole, 50 HzVers ion 5
400-350-397
350-300-508
350-250-630
350-250-498
300-250-381
300-250-305
300-200-489
250-200-381
200-150-508
200-150-483
HSRANGEovERvIEW 2/4/6 PoLE MotorS DoCUMENTATIoN Data Booklet• Technicalproductdescriptions• Productapplications• Performancecurves• Accessories• AvailableinWebCAPS
I&O• Installationandoperation• Warningsandsafetyrequirements• Targetedforinstallers,servicers,andend-users• Shippedwiththepump
Service Instructions• Descriptionofserviceprocedures• Intendedforservicetechnicians• AvailableinWebCAPS
WebCAPS/WinCAPS• Pumpselectionprogram• PDFliteraturefilesavailable• Servicevideos• Replacementpumpinformation• PumpCADdrawings
10 Ways to Kill Your HS Pump
1. Overwork itWorkthepumpcontinuouslyathighercapacities,flows,heads,or speeds than originally specified.
2. Starve itNevergreaseoroilthepump.
3. Choke it• Lowerthewaterlevelinthesump.• Letthesuctionstrainerclogandnevercleanit.• Letthetemperatureoffluidrisewithoutraising the suction pressure.
4. Fry itoperateatshutofffora longtimewiththebypass lineclosedtightwillconvertyourpowertoheat.
5. Poison itChangethepumpedfluidwithoutcheckingwiththemanufac-turer(forexampleaddingchemicals).
6. Stab itRemovethesuctionstrainerswhichwillintroducegrit,sand,andscaleintothefluid.
7. Break its limbsImposeheavypipingloadsonthesuctionanddischarge nozzle, either through initial misalignment or through thermal expansion.
8. Shake itDon’talignatinstallationorinstallonaflimsyfoundation.
9. Drown itFor a packed pump with a drain for the gland leakage: • Plugthedrainwithacigarettebutt,gumorpaper.• Removethewatershield.• Lineupthesplitsonthepackingrings.
10. Neglect check-ups• Ignorethemanufacturer’srecommendationsfor “check-ups”• Don’tcheckpacking,gaskets,o-rings,or other small parts. • Don’teverrepaintit,orlubricatethecoupling, if required. • Don’tcheckvibration.
IMPoRTANTSERvICE&INSTALLATIoNINFoRMATIoN
Being responsible is our foundationThinking ahead makes it possible
Innovation is the essence
FOr PrODuCT requeSTS, PleASe CONTACT:GMH2-CSu@GruNDFOS.COM
GruNDFOS A/SPoul Due Jensens Vej 7DK-8850 BjerringbroTel: +45 87 50 14 00
www.grundfos.com/industryThe name Grundfos, the Grundfos logo, and the payoff Be–Think–Innovate are registrated trademarks owned by Grundfos Management A/S or Grundfos A/S, Denmark. All rights reserved worldwide.
PN 9
7718
637
GRUNDFOS HS HORISONTAL SPLIT CASE tHE GRUNDFOS GIANtMAxIMUM FlOw FOR MUltIplE ApplIcAtION AREAS
GRUNDFOSHS HORISONTAL SPLIT CASE
The Grundfos HS Horisontal Split Case is the giant in the Grundfos product range. It combines double suction ports with high flow and in-line pipe connection.
The HS Horisontal Split Case virtually eliminates radial loads by hydraulically balancing the liquid within its casing and it offers benefits like improved efficiency, minimised vibration, extended seal and bearing life and low noise levels.
Grundfos application areas:• Industrialplants•Publicwatersupply•Districtcooling/heatingplants•Air-con/heatingsystems•Fireprotection•Coolingsystems• Irrigation
grunDFosHS HoriSontal Split caSe
GrundfoS Holding a/SPoul Due Jensens Vej 7DK-8850 BjerringbroTel: +45 87 50 14 00www.grundfos.com
The
nam
e G
rund
fos,
the
Gru
ndfo
s log
o, a
nd b
e th
ink
inno
vate
are
regi
ster
ed tr
adem
arks
ow
ned
by G
rund
fos H
oldi
ng A
/S o
r Gru
ndfo
s A/S
, Den
mar
k. A
ll rig
hts r
eser
ved
wor
ldw
ide.
9690
5270
/091
4/PR
OD
UCT
lin
e m
AnAG
emen
T/11
598-
D&
i
The hS hORiSONTal SPliT caSe iS The GiaNT iN The GRUNDFOS PRODUcT RaNGe. iT cOmBiNeS DOUBle VOlUTe DeSiGN wiTh hiGh FlOw aND iN-liNe PiPe cONNecTiON. The PUmP cOVeRS a wiDe RaNGe OF aPPlicaTiON aReaS aND cONTiNUOUSly PROViDeS eFFicieNT aND ReliaBle PeRFORmaNce DUe TO iTS ROBUST DeSiGN
HS HORISONTAL SPLIT CASEINtRODUctION
The split case is characterised by its ability to virtually eliminate radial loads by hydraulically balancing the liquid within the casing. This balancing ability is made possible by the unique double volute construction, which provides two individual volute passageways to guide the flow out of the impeller and into the discharge. Moreover, the split case provides the double suction impeller, which extends the life of the pump by neutralising the axial forces. The double volute and double suction construction has a number of great benefits:
• Improvedefficiency• Minimisedvibration• Extendedsealandbearinglife• Quietoperation
One man maintenanceThe split case pump features an exceptional bearing house/sealchamberconstruction,whichmakesitunnecessary to remove the top casing half in order to maintain the pump. That means that one person can easily access the bearing house and inspect seals, sleeves and bearings without the strain of heavy lifting. Consequently, the HS Horisontal Split Case guarantees a minimum of downtime because of the simplicity of its maintenance.
Broad band high efficiencyThe impeller design of the split case has been specifically matched to the casing of the pump in ordertoprovidebroadbandhighefficiency.Asaresult, the operating costs of the horizontal split case are reduced dramatically giving it a valuable low life cycle cost.
Performance area for the HS Horisontal Split Case
10 20 40 100 200 400 1000 20003000Q [m³/h]
810
15
20
30
405060
80100
150
200[m]H
HS50 Hz
Areas of application• Industrialplants• Publicwatersupply• Districtcooling/heatingplants• Air-con/heatingsystems• Fireprotection• Coolingsystems• Irrigation
Technical data:• Flowupto2500m³/h• Headupto150m• Liquidtemperaturesfrom0°Cto+100°C• Operatingpressureupto16bar*upto100°CwithBBVPseal*upto135°CwithFPVseal
PeRFecT BalaNce
The curve shows the performance of Grundfos HS Horisontal Split Case pumps
HS HORISONTAL SPLIT CASEtHE DEtAIlS
FlexiblegridcouplingThe flexible grid coupling is called the Rolls-Royce of couplings because it is able to compensate for misalignments to a certain degree. The flexible grid coupling comes as a standard feature in the HS Horisontal Split Case.
RenewableneckringsAllHsHorisontalsplitCasepumpsareequippedwithrenewable neck rings as a standard feature, which means that there is only wear on the bronze neck ring in the area between impeller and pump casing. This way the renewable neck rings help protect the costly casing.
DoublevolutedesignThe double volute eliminates radial loads by balancing pressure within the casing. Three major advantages are improved efficiency, minimised vibration and extended seal and bearing life.
Easy replacementThe bearings and shaft seals can be replaced without removing the upper casing, which makes maintenance simple and reduces downtime.
DoublesuctionimpellerThe definition of split case pumps includes double suction impellers. By directing flow into both sides of the impeller, axial forces are neutralised.
Clockwiseorcounter-clockwiseoperationAllHsHorisontalpumpsareselectedwitheitherclockwise or counter-clockwise rotation. If the opposite rotation is required, due to changes at the installation, the HS can easily be adapted with a simple change out of one component.
Life Cycle Cost (LCC) analysis is an objective standard that allows you to benchmark different pump solutions and suppliers, based on initial investment and the costs of installation, maintenance and energy.
By considering LCC when choosing your pumps, you can help reduce Co2 dramatically and thereby make an important contribution to the well-being of our planet.
SaVe mONey while SaViNG The PlaNeT
HowtocalculateLifeCycleCost(LCC)
LCC = Cic + Cin + Ce + Co + Cm + Cs + Cenv + CdCic = initialcosts,purchasepriceCin = installation and commissioningCe = energy costsCo = operation cost (labour cost)Cm = maintenance and repair costsCs = downtime costs (loss of production)Cenv = environmental costsCd =decommissioning/disposalcosts
HS HORISONTAL SPLIT CASESUStAINABIlItY
Energycostsaccountforupto90%oftheoverallcostof a pump during its lifetime. In other words, thinking about energy efficiency can save you a lot of money.
ThiNKiNG BUilDiNGSAtgrundfosCBs,wearealwaysthinkingbuildings,andour products contribute to making buildings that can almost think for themselves. We do not just consider our products as stand-alone devices – we consider them an integral part of a living building whose purpose is to function in the best way possible for its inhabitants.
Grundfos CBS offers products across the full range of applications, including heating, air conditioning, waste water, booster systems, fire protection systems and district energy.
ourexpertiseisfoundedindecadesofglobalexperience and we are proud to share our knowledge with our clients. We are also determined to take the lead on new technologies and innovation opportunities.
To learn more about Grundfos CBS and to find out how we can be of assistance, contact Grundfos or visit us at www.grundfos.com/business-areas/commercial-buildings.html
Make the most of Grundfos CBS – visit the Thinking Buildings Universe at www.grundfos.com/business-areas/commercial-buildings.html ourwebsitecontainsarangeofservicesthatfunctionasyouronlinegrundfosCBsexpert:
• QuickPumpSelectionwithanextensive productdatabaseanddimensioningtoolthathelpsyouchoosetherightpumpforyourneeds
• E-learningprogrammethatletsyouimproveyourspecialistknowledge
• AccesstoThinkingBuildingsE-News,whichkeepsyouuptodateonthelatesttechnology,productinformationandbackgroundmaterial
• Lexiconwhereyoucanlookupdefinitions ofrelevantprofessionalterms
Welcome to the Grundfos CBS Thinking Buildings Universe!
exPlORe OUR ONliNe UNiVeRSe
AnLCCprocesswillshowthemostcosteffectivesolution within the limits of available data.
Recommended