View
252
Download
6
Category
Tags:
Preview:
DESCRIPTION
Manual de grasas codigo NLGI
Citation preview
101
GREA
SES
GREASES
102
GREASES
Grease Reference Chart – Albida and Alvania EP
1 = Excellent 2 = Very Good 3 = Good X = Not Recommended
* Extreme conditions, including long maintenance schedule, hot weather, long haul, hills, stop-and-go, heavy braking** Wet conditions, including rain, snow, water wash-off
AlbidA AlVANiA EPEP1 EP2 SlC460 EP 1&2 EP2
Moly
indicates Synthetic Grease FULL FullPerformance FeaturesHigh Temp 2 2 1 3 3low Temp 3 3 2 3 3Mechanical Stability 2 2 2 2 2Water Resistance 2 2 3 2 2Anti-Rust 2 2 2 2 2Extreme Pressure (EP) 2 2 2 2 2General RecommendationsFarming 2 2 3 2 2Construction 2 2 2 2 2Trucking 1 1 3 2 2Manufacturing 1 1 1 2 2Marine-leisure 2 2 3 2 2logging 2 2 3 2 2Paper Manufacturing 2 2 1 X XApplications:Wheel bearings 1 1 X 3 3Wheel bearings* X 1 X X XOther bearings 2 2 1 1 1Pillow blocks 1 1 2 2 2Chassis Cups and Saucers 2 2 X 2 2Universal Joints 2 2 X 2 2Slack Adjusters 2 2 X 2 XPins and bushings 2 2 3 2 25th Wheels 2 2 X 2 25th Wheels* 3 2 X X X5th Wheels** 3 2 X X XSplines, Yokes 1 1 2 2 2Couplings (low/med. speed) 2 3 2 2 2Car Washes 2 3 X 2 2boat Trailers 2 3 X 2 2ATVs 2 3 X 2 2irrigation 2 3 X 2 2
103
GREASES
GREA
SES
Grease Reference Chart – Darina XL and SRS 2000
1 = Excellent 2 = Very Good 3 = Good X = Not Recommended
* Extreme conditions, including long maintenance schedule, hot weather, long haul, hills, stop-and-go, heavy braking** Wet conditions, including rain, snow, water wash-off
dARiNA Xl SRS 2000102M Moly EP2 Moly Winter Summer Extreme
Extreme O
EP Moly
indicates Synthetic Grease FULL PARTIAL PARTIAL PARTIAL PARTIAL
Performance FeaturesHigh Temp 1 2 2 X 3 2 2 2
low Temp 1 3 3 2 X 3 2 3
Mechanical Stability 1 2 2 2 2 1 1 2
Water Resistance 3 2 2 2 1 1 1 1
Anti-Rust 2 2 2 2 1 1 1 1
Extreme Pressure (EP) 1 2 2 2 2 1 2 1
General RecommendationsFarming 2 1 1 3 2 2 3 2
Construction 1 2 2 3 2 2 2 1
Trucking 2 2 2 2 2 1 1 1
Manufacturing 1 1 1 3 2 1 2 2
Marine-leisure 1 2 2 1 1 1 X 2
logging 1 2 2 3 1 1 X 1
Paper Manufacturing X X X X X 1 X X
Applications:Wheel bearings 2 2 2 X 3 1 X 2
Wheel bearings* 2 2 2 X X 1 X 2
Other bearings 2 2 2 3 3 2 3 2
Pillow blocks 1 2 2 3 2 2 3 2
Chassis Cups and Saucers 2 2 2 3 2 1 3 1
Universal Joints 3 3 3 3 1 1 3 1
Slack Adjusters X 3 X 1 2 2 2 X
Pins and bushings 1 2 2 3 1 2 2 1
5th Wheels 2 2 2 2 2 2 2 1
5th Wheels* 2 2 2 X 3 2 X 1
5th Wheels** X X X X 3 2 X 1
Splines, Yokes 2 3 3 3 2 2 3 2
Couplings (low/med. speed) 3 3 3 3 1 1 X 1
Car Washes 3 2 2 2 1 1 3 1
boat Trailers 3 2 2 2 1 1 X 2
ATVs 2 2 2 2 2 1 X 2
irrigation 3 2 2 3 1 1 X 2
104
GREASES
A fully synthetic, EP (moly) grease.
Applications:• All snowmobile grease applications including recreational,
competitive racing and long endurance conditions• Chassis points, pins and bushings, plain and rolling element
bearings
Advantages:• Synthetic base oils provide better performance over a wider
temperature range• Excellent load carrying / shock loading ability to minimize
bearing and suspension wear• Contains a fine dispersion of moly extreme pressure additive• Superior low temperature mobility and dispensability• Excellent lubrication as low as -40°C• Excellent resistance to water washout• Excellent adhesive qualities• Superior mechanical stability• Prevents corrosion
Performance Specification:• Meets NLGI GC-LB wheel bearing and chassis requirements
Typical Properties:ADVANCE SNOW ULTRA GREASE
NLGI Grade 1
Product Code 504-593
Colour Grey
Thickener type Microgel
Dropping Point, °C 260 +
Base Oil Viscosity, cSt 40°C 100
4 Ball Wear, mm 0.6
4 Ball EP, Load Wear Index 70
Est. Operating Range, °C -45 to 170
Min. Dispensing Temp, °C (may vary with grease gun or application technique) -40
Advance* Snow Ultra – Synthetic Snowmobile Grease 1.17
Snowmobile
105
GREASES
GREA
SES
Seven premium aviation greases utilizing various thickeners and both mineral and synthetic base oils.
Applications:• AeroShell Grease 5: wheel bearings, high speed accessories
such as starters• AeroShell Grease 6: multi-purpose, anti-friction and plain
bearings• AeroShell Grease 7: heavily loaded gears, actuators, propellers,
screws • AeroShell Grease 14: helicopter main and tail rotor bearings• AeroShell Grease 22: high speed, heavily loaded applications
over wide temperature ranges• AeroShell Grease 33: multi-purpose airframe grease developed
for Boeing 3-33A• AeroShell Grease 33MS shares advanced technology
of AeroShell Grease 33, with extreme pressure (EP) characteristics. Contains synthetic oil and must not be used with incompatible seal materials
Note: AeroShell greases are not necessarily compatible with other greases. Always be sure to clean and completely remove all old greases before installing the new AeroShell greases
Advantages:• Designed to resist oxidation and thermal breakdown, resist
water washout, and prevent corrosion• Provide high load carrying capabilities in the intended
applications• Perform over a wide range of temperatures
AeroShell* Greases 5.12
Aviation / Synthetic
106
GREASES
Typical Properties:
AeroShell* Greases 5.12
AER
OSH
ELL
GRE
ASE
S Gre
ase
Gre
ase
Gre
ase
Gre
ase
Gre
ase
Gre
ase
Gre
ase
Gra
des
56
714
2233
33 M
S
Prod
uct C
odes
519-
005
519-
006
519-
010
519-
015
519-
035
519-
033
519-
037
Colo
urA
mbe
rBr
own
Buff
Tan
Tan
Gre
enDa
rk G
rey
Thic
kene
r M
icro
gel
Mic
roge
lM
icro
gel
Cal
cium
Mic
roge
lLit
hium
Lithi
umC
ompo
und
Base
Oil
Min
eral
Min
eral
Synt
hetic
Min
eral
Synt
hetic
Synt
hetic
Synt
hetic
Drop
ping
Pt,
°C+2
15+2
15+2
60+1
48+2
60+2
50+2
34
Oil
Visc
osity
, @
98.
9°C
31.8
5.5
3.1
3.1
5.8
3.4
3.4
Pene
tratio
n @
25°
CU
nwor
ked
Wor
ked
281
284
287
300
283
296
267
273
271
275
290
297
288
281
Ope
ratin
g Te
mp
Rang
e, °
C-2
3 to
+17
7-4
0 to
+1
21-7
3 to
+1
49-5
4 to
+9
3-6
5 to
+2
04-7
3 to
+1
21-7
3 to
+1
21
US
Mili
tary
A
ppro
vals
MIL-
G-3
545
(obs
olet
e)M
IL-G
-241
39M
IL-PR
F-23
827
MIL-
G-
2553
7M
IL-PR
F-81
322F
MIL-
PRF-2
3827
MIL-
G-
2116
4DBM
S 3-
33A
Aviation / Synthetic
107
GREASES
GREA
SES
Applications: • Albida EP grease is especially suited for use in mining &
smelting operations, the steel industry, pulp & paper mills and cement plants. It is also recommended for any industrial applications where heavy-duty loads & wide temperature ranges are encountered
• Albida EP-1 and EP-2 greases also meet the NLGI GC-LB wheel bearing and chassis lubricant requirements, thus satisfying the needs of automotive and heavy-duty transportation equipment. Albida EP-1 can be used with confidence as the one grease for virtually every application on a Tractor Trailer all year long
• Note: Albida EP-2 is now also available as part of the Tactic Single Point lubricator offering. Applicable Product Code for this is 504-700-21 – Tactic EMV Albida EP-2, also required is the Drive Unit (JDE Product Code 96103000)
Advantages: Albida EP grease has the following properties: • Outstanding Mechanical Stability – it resists hardening or
softening in service delivering long grease life and dependable component protection
• Superior High Temperature Performance – its estimated maximum operating temperature of 160°C for the EP-2 grade is significantly higher than conventional soap greases
• Excellent Load Carrying Ability – contains EP additive to provide an extra measure of protection under severe boundary lubrication conditions
• Excellent Resistance to Water Washout and Rust Protection – in applications where water contamination or humidity becomes a problem
• Compatibility – is compatible with most other grease technologies
• Easily Recognized – is dyed red for ease of identification
Albida* EP – Multi-Purpose Lithium Complex Grease Updated Technology (1) 3.74
Automotive Chassis/Wheel Bearing/Multipurpose
108
GREASES
Typical Properties: ALBIDA EP EP-2 EP-1
ASTM MethodProduct Codes 504-708 504-707
NLGI Grades 2 1
Colour Red Red
Appearance Smooth, Tacky
Smooth, Tacky
Worked Penetration 60 strokes @ 25°C Worked, 100 000 x, % change
280 10
325 10
D 217
Estimated Operating Range °C -20 to 160 -30 to 160
Minimum Dispensing Temperature, °C (2)
-15 -25
Dropping Point, °C 260+ 260+ D 2265
Low Temperature Torque, Nm 9.4 -- D 4693
Mobility, @ -17.8°C, g/min 0.8 -- USS DM 43
Base Oil Viscosity, cSt @ 40°C
220 220 D 445
Oil Separation 2 3 D 1742
4 Ball Wear, mm 0.45 0.5
EP Tests Timken OK Load, kg4 Ball, Weld Load, kg
20.4250
20.4250 D 2596
Water Washout, 79°C, % loss 5 8 D 1264
Bomb Oxidation @ 99°C Pressure Drop @ 100 h, kPa 28 35 D 942
Corrosion Test, 48 hr. @ 52°C, Rating Number Pass Pass D 1743
(1) Antimony free (2) May vary with design of grease gun or application
Albida* EP – Multi-Purpose Lithium Complex Grease Updated Technology (1) 3.74
Automotive Chassis/Wheel Bearing/Multipurpose
109
GREASES
GREA
SES
Retinax Grease CMX 2 is a multipurpose lithium complex high dropping point, extreme pressure (EP) grease containing molybdenum disulfide (moly).
Applications: • Construction, mining and agricultural applications for
Retinax Grease CMX 2 include virtually all points of grease lubrication found on dozers, scrapers, earthmovers, cranes, backhoes, shovels, rollers, tractors, combines and cotton pickers
• These lubrication points include all types of anti-friction bearing arrangements from plain sleeve-type to rolling element bearings as well as bushings and other sliding surface or pivot points. The presence of moly provides added shock loading protection
• Retinax Grease CMX 2 is formulated to perform well in conditions of high loads and temperature extremes
• Additionally, Retinax Grease CMX 2 provides excellent resistance and corrosion and are highly resistant to water washout
Advantages:• Excellent heavy and shock load protection• Resistance to water washout• Wide range of applications• High temperature capability• Good low temperature pump-ability• Excellent rust and corrosion protection
Retinax* Grease CMX 2 – Multipurpose Lithium Complex Grease with Moly for Construction, Mining and Agricultural Equipment 8.23
Transport Grease
110
GREASES
Retinax* Grease CMX 2 – Multipurpose Lithium Complex Grease with Moly for Construction, Mining and Agricultural Equipment 8.23
Typical Properties:RETINAx GREASE CMx 2
Test Method
Product Code 504-370
NLGI Grade 2
Thickener Type Lithium Complex
Appearance Grey, Tacky
Moly % 3%
Penetration, dmm Worked , 60X Worked, 100, 000 x, % Change
D 217 280
10
Water Washout, 79°C, % loss D 1264 2
Dropping Point, °C D 2265 245+
Rust Protection D 1743 Pass
Copper Corrosion D 4048 1b
Base Oil Viscosity @ 40°C, cSt @ 100°C, cSt
D 445 D 445
320 25
Timken, OK Loads, kg D 2509 22.7
Four Ball EP Weld Point, kg D 2596
400
Four Ball Wear, mm 1 hr, 75°C, 1200 rpm, 40 kg D 2266 0.5
Guide to Usable Temperature Min, °C Continuous Service, Max, °C Short Exposure, Max, °C
-20 120 140
Transport Grease
111
GREASES
GREA
SES
A premium quality, synthetic-based, lithium complex grease.
Applications:• Heavily loaded applications at low to moderate speeds and
in high temperature conditions, such as the dryer bearings of paper machines
• Albida SLC 460 can also be used in the lubrication of metal treatment plants and mines
Advantages:• Enhanced high-temperature performance• Excellent mechanical stability• Excellent anti-wear and extreme pressure performance• High dropping point• Extended life
Performance Specifications:• NLGI Grade 1.5 lithium complex grease with an ISO VG
460 synthetic polyalphaolefin oil blend• NLGI Grade 1.5
Typical Properties:ALBIDA SLC 460
NLGI Grade 1.5
Product Code 504-706
Colour Green
Dropping Point, °C 305
Thickener Lithium complex
Base Oil Viscosity, cSt@ 40°C 460
4 Ball EP, Weld Load 400
Albida SLC 460 – Premium Quality Synthetic-Based Lithium Complex Grease 3.73
High Temperature (Extreme) / Synthetic
112
GREASES
Alvania* Grease CG –For Couplings Used in Industrial Equipment 7.03
Alvania Grease CG is specially formulated with a lithium soap/polymer thickener, which has excellent resistance to oil separation when subjected to the high centrifugal forces normally found in couplings. Applications:Common grease lubricated couplings include:• Geared Couplings that have internal and external spur gears
that mesh within a common rotating hub connecting the shafts• Steel Grid Couplings that have a convoluted band of flexible
spring steel physically linking the hubs together• Flexible Chain Couplings that have a roller chain that meshes
with a sprocket cut in each mating hub• Alvania Grease CG is suitable for all types of grease lubricated
couplings used in industrial equipment• Advanced technology has enabled Alvania Grease CG to
perform beyond the normal 6-month change interval. In actual field experience this grease has shown its ability to perform satisfactorily beyond 3 years. This product should be used in all grease couplings, especially in those hard to service or those operating under severe conditions
• Because of its high base oil viscosity, Alvania Grease CG is also suitable for use in other industrial applications where the equipment is subject to high water wash, low speeds and heavy or shock loads
Advantages:• Resistance to centrifugal separation • Extended re-lubrication frequency • High load carrying capabilities • Resistance to water washout • Stays in place under high speeds • Corrosion and rust protection • Minimizes coupling wear • Minimizes coupling freeze-up • Use at temperatures up to 325°F • One grease for all grease coupling types • Based on ASTM D 1478 and D 4693 torque tests, the minimum
recommended bearing lubrication service would be -10°F• For coupling service the minimum usable temperature is not
dependent upon ease of pumping or bearing breakaway force. Field service confirms problem-free coupling service at -20°F and below
• Actual minimum temperature for coupling service would be below -20°F
Automotive Chassis/Wheel Bearing
113
GREASES
GREA
SES
Typical Properties:ALVANIA* GREASE CG Test Method
Product Code 504-600
NLGI Grade 0/1
Appearance Dark Brown, Tacky
Lithium Soap/Polymer, wt% 10.0
Viscosity(1)
@ 40°C, cSt @ 100°C, cSt
D 445D 445
>3200>50
Penetration. Dmm Worked, 60X Worked, 10,000X, % Change
D 21735010
Dropping Point, °F Mettler 320+
Centrifugal Oil Separation, vol % D 4425 None
Water Spray-Off, wt % D 4049 < 3
Rust Protection D 1743 Pass
Timken, OK Load, lbs D 2509 40+
Four-Ball EP D 2596
Load Wear Index, kgf 68
Weld Point, kgf 400
Four-Ball Wear, mm 1 hr, 75°C, 1200 rpm, 40 kgf
D 2266 0.4
Guide to Usable Temperature
Min, °F (Pumping) 20
Min, °F (Bearings) -10
Min, °F (Couplings) Below -20
Continuous Service, Max,°F 250
Short Exposure, Max, °F 325
1 Nominal base oil viscosities without polymers or additives are 680 cSt @ 40°C and 26.1 cSt @ 100°C
Alvania* Grease CG – For Couplings Used in Industrial Equipment 7.03
Automotive Chassis/Wheel Bearing
114
GREASES
A premium, EP, long-life railroad journal roller bearing grease.
Applications:• Heavily loaded locomotive and rolling stock wheel bearings
Advantages:• Excellent rust and oxidation resistance• Outstanding oxidation stability and high wear resistance in
heavily loaded applications• Extended trouble free service and long shelf life
Performance Specification:• Association of American Railroads (AAR) Specification M-942-09
Typical Properties:ALVANIA EP D
NLGI Grade 1.5
Product Code 504-534
Colour Brown
Dropping Point, °C 180
Thickener Lithium/Calcium Soap
Base Oil Viscosity, cSt @ 40°C 173
4 Ball EP, Weld Load 250
Alvania* EP D Grease – Railroad Bearing Grease 3.61
Moly
115
GREASES
GREA
SES
Premium multi-purpose, extreme pressure (EP), lithium soap based greases.
Applications:• Multi-purpose, heavy-duty automotive, industrial and marine
applications• Pins and bushings, plain and rolling element bearings• Including chassis points, universal joints, water pumps, track
rollers, clutches and wheel bearings• -50°C to 130°C temperature range• Arctic grades are designed for low temperature central systems• MS (Multi-Season) grades for low temperature grease gun
applications• Moly versions should be used for sliding applications such
as steering gears, king pins, front suspensions, fifth wheels, guide ways and booms
Advantages:• Improved oxidation stability• Improved mechanical stability• EP for excellent load carrying ability• Compatible with most other greases• Excellent rust protection• Resists water washout
Performance Specification:• Registered with the Canadian Food Inspection Agency (CFIA)
under Lubricants: General, for use where contact with food will not occur; avoid food contamination during application and storage
Alvania* EP – Premium Multi-Purpose Grease 3.14
Moly / Multi-Purpose
116
GREASES
Typical Properties:
ALV
AN
IA E
P
Prod
ucts
EP 2
EP2
Mol
yEP
1EP
Arc
ticEP
Arc
tic
Mol
yEP
MS
NLG
I Gra
des
22
10
01
Prod
uct C
odes
504-
532
504-
518
504-
531
504-
509
504-
514
504-
513
Colo
urBr
own
Gre
yBr
own
Brow
nG
rey
Brow
n
Thic
kene
r Typ
eLit
hium
soa
pLit
hium
soa
pLit
hium
soa
pLit
hium
soa
pLit
hium
soa
pLit
hium
soa
p
Dro
ppin
g Po
int,
°C20
020
020
019
019
019
5
Base
Oil
Visc
osity
, cSt
@
40°
C15
015
015
020
2027
Tim
ken
OK
Load
, kg
18.2
18.2
18.2
18.2
18.2
18.2
4 Ba
ll W
ear,
mm
0.5
0.5
0.5
0.6
0.6
0.6
4 Ba
ll EP
, Wel
d Lo
ad, k
g25
025
025
020
025
025
0
Est.
Ope
ratin
g Ra
nge,
°C
-25
to 1
35-2
5 to
135
-30
to 1
35-5
0 to
80
-50
to 8
0-4
0 to
80
Min
. Disp
ensin
g Te
mp,
°C
(may
var
y w
ith d
ispen
sing
-20
-20
-25
-45
-45
-35
Alvania* EP – Premium Multi-Purpose Grease 3.14
Moly / Multi-purpose
117
GREASES
GREA
SES
Premium, heavy-duty, multi-season, lithium soap based, EP grease for mining and construction.
Applications:• Can be used to lubricate plain, sleeve and rolling bearings in
most mining and construction applications operating where a multi-season product is required
• Designed for low temperature central system use to -40°C • Can be used for low temperature grease gun applications
Advantages:• Enhanced extreme pressure protection• Improved mechanical and oxidation stability for
super long life• Non-lead• Wide application temperature range from -40°C to 100°C• Enhanced load carrying ability • Anti-rust capability • Resistance to water washout
Alvania* EP LTX – Premium, Heavy-DutyMulti-season Grease 3.62
Multi-purpose
118
GREASES
Alvania* EP LTX – Premium, Heavy-DutyMulti-season Grease 3.62
Typical Properties:
ALVANIA EP LTx
Product Codes 504-500 ASTM Method
NLGI Grades 1 .
Colour Grey .
Minimum Dispensing Temperature, °C1 -25
Thickener Type Lithium
Dropping Point, °C 195 D 2265
Worked Penetration 60 strokes @ 25°C105 strokes @ 25°C
325345
D 217D 217
Mineral Oil Viscosity, cSt @ 40°C 150 D 2270
Est. Operating Range, °C -30 to +135
4 Ball Wear Test, mm 0.5 D 2266
Bleed 24 hrs @ 25°C, % wt 2 D 1742
Corrosion Test, 48 hr. @ 52°C, Rating Pass D 1743
Bomb Oxidation @ 99°CPressure Drop @ 100h, kPa 15 D 942
EP Tests4 Ball, Load Wear IndexTimken Oil Load (kg)
6027
D 2596D 2509
1 May vary with design of grease gun or centralized pumping system and size/length of dispensing lines.
Multi-purpose
119
GREASES
GREA
SES
Extreme pressure, automotive ball joint grease.
Applications:• Specially formulated for production fill for ball joints in
automotive applications
Advantages:• Excellent mechanical stability and corrosion protection• Excellent oxidation stability, helping extend grease life• Excellent extreme pressure, anti-rust and water resistance
qualities• NLGI grade 2• A lithium, 12-hydroxystearate thickened grease containing
1% molybdenum disulfide and a special polymer
Typical Properties:ALVANIA 0860
Product Code 504-594 ASTM Method
NLGI Grade 2
Colour Grey
Texture Smooth
Thickener Type Lithium
Dropping Point (°F/°C) 385/196 Mettler
Base Oil Viscosity, cSt@ 40°C@ 100°C
15814.5 D 445
Penetration dmm, worked 60 strokes 270 D 217
Water Washout @ 79°C (% wt. loss) 0.5 D 1264
4 Ball EP PropertiesLoad wear (kg)Weld point, kg
40250 D 2596
Rust Prevention Pass D 1743
Alvania* 0860 3.16
Automotive Chassis/Wheel Bearing
120
GREASES
All-season rail-curve greases.Applications:• Curved sections of railway track serviced by track-side rail
lubricators• Cardura Plus for steep grades and high curvature applications
which may generate higher wheel temperaturesAdvantages:• Retention on tracks• Pumpability / mobility to ensure application at low
temperatures• All-season performance, proven at temperatures from
-40°C to +40°C• Reduced rail / wheel wear and maintenance• Potential for improved fuel economy• Excellent track coverage: over 5 km with Cardura WS, 10 km with Cardura PlusNote: Please consult your Shell Product Specialist to determine proper lubricator design
Typical Properties:CARDURA
Products WS PLUS
NLGI Grades 1 1
Product Codes 504-506 504-508
Colour Black Black
Solid Additives Graphite / Moly Graphite
Thickener Type Calcium Microgel
Dropping Point, °C 142 260+
Base Oil Viscosity, cSt@ 40°C 17.4 22.0
Est. Operating Range, °C -40 to +80 -35 to +80
Low Temp. Pumpability‡ ,Pressure Drop, kPa /m (psi /ft)
@ 0°C@ -10°C@ -20°C@ -30°C@ -40°C
460 (20)650 (29)770 (34)
1,100 (49)1,800 (80)
–––
1,850 (88)3,800 (168)
‡ Pressure drop in 3/16 inch OD tubing @ shear rate of 1 sec-1
Cardura* – Rail Curve Lubricants 3.81
Railway
121
GREASES
GREA
SES
A premium, non-EP, lithium soap based grease.
Applications:• Rolling bearings in traction motors of GM Electromotive
Diesels (EMD) and GE Electric locomotives• Conventional electric motor bearings including “lifetime”
seal-for-life units• Suitable for temperatures up to 135°C
Advantages:• Superior mechanical stability for long life• Long oxidation life• Grease hardness suitable for electric motor bearings
Performance Specifications:• Recommended for EMD and GE locomotive electric
motor bearings• Recommended for Westinghouse electric motor bearings
Typical Properties:CYPRINA RA GREASE
NLGI Grade 3
Product Code 504-538
Colour Amber
Thickener Type Lithium Soap
Dropping Point, °C 195
Est. Operating Range, °C -30 to 135
Base Oil Viscosity @ 40°C 93
Cyprina* RA – Electric Motor Bearing Grease 3.57
Electric Motor / Railway
122
GREASES
Premium multi-purpose, EP, non-lead, microgel based greases, available in synthetic base oil, moly and multi-season versions.
Applications:• Multi-purpose industrial and automotive• Where extreme temperatures and shock loading are
encountered• Including conveyors and pug mills of asphalt plants, ball mills
of ore crushing• Wheel bearings and chassis points
Advantages:• Synthetic XL 102M provides year round protection even at
extremely low and high temperatures• “ColourSense” indicator – grease changes colour from its
original blue as the temperature rises above 120°C Colour changes thru green , then to brown and finally to orange as the temperature of the application rises. Useful to indicate possible faulty equipment, excessively high temperatures and a need for more frequent regreasing
• Superior high temperature performance and oxidation resistance
• Excellent load carrying ability• Excellent low temperature dispensability from the entire XL
family of greases• Compatibility with most other types of greases (thickeners)• Outstanding water resistance• Temperature range from -45°C to 170°C
Performance Specifications:• Darina XL greases meet NLGI GC/LB wheel bearing and
chassis requirements• Registered with the Canadian Food Inspection Agency
(CFIA) under Lubricants: General, for use where contact with food will not occur; avoid food contamination during application and storage
Darina* XL – Premium Multipurpose Greases 3.75
Automotive Chassis/Wheel Bearing
123
GREASES
GREA
SES
Typical Properties:
DA
RIn
A X
L G
REA
SES
Prod
ucts
102M
(Mol
y)EP
2EP
2 M
oly
Mul
ti-Se
ason
NLG
I Gra
des
12
21
Prod
uct C
odes
504-
574
504-
554
504-
555
504-
556
Colo
urG
rey
Blue
Gre
yBl
ue
Thic
kene
r Typ
eM
icro
gel
Mic
roge
lM
icro
gel
Mic
roge
l
Dro
ppin
g Po
int,
°C26
0+26
0+26
0+26
0+
Base
Oil
Type
Synt
hetic
Min
eral
Min
eral
Min
eral
Base
Oil
Visc
osity
, cSt
@
40°
C10
017
017
021
4 Ba
ll W
ear S
car,
mm
0.6
0.5
0.5
0.5
4 Ba
ll EP
, Loa
d W
ear I
ndex
7060
6055
Est.
Ope
ratin
g Ra
nge,
°C
-45
to 1
70-2
0 to
160
-20
to 1
60-4
0 to
80
Min
. Disp
ensin
g Te
mp,
°C
(may
var
y w
ith d
ispen
sing
syste
m)
-40
-10
-10
-35
Darina* XL – Premium Multipurpose Greases 3.75
Automotive Chassis/Wheel Bearing
124
GREASES
A grease for reducing rotating friction between drill rods and casings.
Applications:• Outside of drilling rods, prior to insertion into the hole
Advantages:• Reduces friction and horsepower requirements• Increases drilling efficiency • Contains a germicidal agent to prevent infection of cuts
which may occur during handling of the drill rods
Typical Properties:DIAMOND DRILL ROD
NLGI Grade 3
Product Code 504-971
Colour Amber
Thickener Type Barium Sodium Complex
Base Oil Viscosity, cSt@ 40°C 118
Dropping Point, °C 196
4 Ball EP, Load Wear Index 42
Est. Operating Range, °C -20 to + 120
Diamond Drill Rod Grease – Drill Rod Lubricant 3.51
Drill Rod
125
GREASES
GREA
SES
A grease designed to lubricate and protect valves exposed to corrosive sour natural gas and oil.
Applications:• Valve bodies and stems of valves in sour (H2S-containing)
natural gas pipeline and gas plant service
Advantages:• H2S corrosion protection• Base oils selected for year-round, low-temperature valve
operation
Typical Properties:DURSOL K1 GREASE
NLGI Grade 1
Product Code 504-630
Colour Light Green
Thickener Type Microgel
Dropping Point, C 260+
Base Oil Viscosity, cSt@ 40°C 20
Est. Operating Range, °C -30 to 120
Dursol* K1 – Sour Gas Valve Grease 3.60
Valve (Sour Gas)
126
GREASES
A non-asphaltic, lead-free open gear lubricant with no environmentally offensive solvents; available in seven viscosity grades (appropriate grade selection is dependent upon application and ambient operating temperatures).
Applications:• Open gears as primarily found on mining shovels, draglines
and grinding mills• Plain and anti-friction bearings, pins and bushings on shovel
crawlers and boom assemblies• Shovel sticks, swing gears, crowd pinions and racks, roller
paths• Malleus GL-95 is also available in an aerosol spray can
Advantages:• Synthetic and paraffinic base oils utilized to optimize
performance• Lead free• May be applied manually or via an automatic lube system• Malleus GL improves equipment availability and saves on
maintenance costs because it:• Stays soft and pliable to eliminate root build-up• Is fortified with molybdenum disulphide (Moly) and
other solid lubricants for a proper film structure with good anti-wear, EP, load carrying and shock loading protection
• Passes FZG +13 load stages• Minimizes cold metal contact welding• Resists contamination from other oils• Alleviates “stick slip” vibrations• Reduces consumption rates
Performance Specifications:• Recognized for use by B.E., Marion, P&H, Allis Chalmers• Qualifies as P&H Multi-Service Mining Lubricant
Malleus* GL – Heavy-Duty Open Gear Lubricant 3.84
Open Gear
127
GREASES
GREA
SES
Malleus* GL – Heavy-Duty Open Gear Lubricant 3.84
Typical Properties:
* A
lso a
vaila
ble
in a
n ae
roso
l spr
ay c
an. P
rodu
ct c
ode
504-
688
MA
LLEU
S G
L
Gra
des
6595
*20
530
040
0
Prod
uct C
odes
504-
676
504-
680
504-
684
504-
685
504-
669
Den
sity
@ 1
5.6°
C1.
070
1.07
61.
080
1.09
01.
090
App
rox.
NLG
I gra
de00
/ 0
0000
/ 0
0000
/ 0
0000
0
Wor
ked
Pene
tratio
n @
25°
C (6
0x)
420+
420+
420+
418
370
App
aren
t Visc
osity
, cP
@ 4
0°C
@ 1
00°C
2,25
01,
325
6,12
54,
000
7,30
06,
100
7,06
01,
375
36,7
503,
825
App
aren
t Visc
osity
, cP
@ -1
°C@
-18°
C@
-40°
C
–6,
600
39,0
00
–9,
400
–
–20
,500
–
7,90
016
,000
–
–12
,500
–
4 Ba
ll W
ear S
car D
iam
eter
, mm
0.6
0.7
0.7
0.7
0.7
4 Ba
ll EP
Wel
d Lo
ad, k
gLo
ad W
ear I
ndex
620 85
800
110
800
120
800
131
800
166
Fale
x C
ontin
uous
Loa
d Fa
ilure
, kg
+204
5+2
045
+204
5+2
045
+204
5
Est.
Low
Tem
p. D
ispen
sing,
°C
-30
-10
0+7
+10
Open Gear
128
GREASES
Malleus Grease OGM Medium is primarily designed for use in very heavy applications, and under severe operation conditions, in mining equipment, shovels, draglines and excavators in open cut operations.
Applications: Typical applications are: • Open gears on draglines, shovels, excavators, stackers and
reclaimers • Sticks • Circle Rail and rollers • Heavily loaded, slow moving antifriction bearings • Bushings • Slow moving wire rope
Advantages:• Excellent load carrying capacity under severe operation
conditions – grease contains selected components to ensure excellent resistance to shock and permanent heavy load
• Very high mechanical and thermal stability – grease thickener structure is designed to resist mechanical stress and high temperature
• Withstanding severe operation conditions – like dust and dirt contamination, water, changes in temperature
• Maintain adhesive characteristic over time – due to the use of an advanced polymer technology, ensuring long lasting protection
• Low temperature capabilities – the lubricant film maintains its adhesive characteristic and durable protection under the most demanding condition
Malleus* Grease OGM Medium – Superior Performance Open Gear and Wire Rope Grease 7.02
Open Gear
129
GREASES
GREA
SES
Typical Properties:MALLEUS OGM MEDIUM
NLGI Consistency 000
Product Code 504-697
Colour Black
Soap Type Al Complex
Base Oil (type) High Quality Mineral
Solid Lubricant Yes
Base Oil Viscosity (without solvent)@ 40°C cSt @ 100°C cSt (IP 71/ASTM-D445)
2250132
Cone Penetration Worked @ 25°C 0.1 mm (IP 50/ASTM-D217) 445 -475
Four Ball Test Kg (IP 236) 800
Four Ball Wear Scar mm (ASTM D 2266) Max 0.7
Four Ball Load Wear Index (LWI) Kg(ASTM D 2596) 120
Copper Strip (ASTM D 4048) 1b
Malleus* Grease OGM Medium – Superior Performance Open Gear and Wire Rope Grease 7.02
Open Gear
130
GREASES
Coming soon
Shell Malleus Greases STC are storage and thread compounds, meeting the requirements of the DEA 47(E) Committee for use as ‘green’ dopes. These greases are based on highly refined mineral oils with a calcium soap thickener and suitable additives to provide excellent corrosion protection, prevent galling of threads and ensure consistent make/break torques.
Applications:• Shell Malleus Grease STC 1 (SSG 3001) Thread compounds for use with Premium connectors
Advantages:• Environmentally friendly. Products contain no metals (Pb,
Zn, Cu) in metallic form or other components identified by the Paris Commission (PARCOM), e.g. PTFE, nylon or other polymers
• Meet the requirements of DEA 47 (E) Committee. Offers identical level of performance as that given by Shell Malleus Grease TC
• Proven performance in field tests. Successfully applied in suitable applications
• Excellent anti-corrosion performance also provided. Can be used as effective corrosion preventives, allowing mills to only use one product and simplifying operations for production and drilling companies who do NOT have to remove protectives before applying a thread compound
• Excellent brushability. Can be applied even at low temperatures
• Excellent anti-galling performance. For carbon steels and up to 13% chromium steels both products minimise damage to pipe threads from galling
• Excellent water wash-out resistance. Maintains protection and prevents corrosion. Essential qualities for vehicles working in wet environments
• Safe handling. Products do not require labeling
Malleus* STC – Storage & Thread Compounds for use in the Oil Industry 3.63
Thread Compound
131
GREASES
GREA
SES
Malleus* STC – Storage & Thread Compounds for use in the Oil Industry 3.63
Typical Properties:MALLEUS GREASE STC 1
Colour Black
NLGI Consistency 1
Soap Type Calcium
Base Oil (type) Mineral oil
Base Oil Viscosity (without solvent)@ 40°C, cSt @ 100°C, cSt (IP 71/ASTM-D445)
12011.0
Cone Penetration Worked @ 25°C 0.1 mm
(IP 50/ASTM-D217) 325
Dropping Point, °C(IP 132/ASTM-D566-76) 145
Applicability at low temperatures Excellent
Thread Compound
132
GREASESRetinax* Fifth Wheel Grease – Heavy Duty Grease Resistant to Water Washout 3.69
Retinax Fifth Wheel Grease is a heavy-duty grease formulated with graphite and molybdenum disulfide (moly) for extreme pressure performance.
Applications:• In severe applications where high load carrying capability
and/or outstanding resistance to water washout is required• Used in applications where the lubricant is designed to
thermally decompose leaving behind the solid additives to afford lubrication
• Fifth wheels• Ball mill gears• Fork lifts (rails and wheel-drive gears)• Slipper drives (steel mills)• Off Shore jack up rig legs• Dredging (cutting heads)• Traveling water screens
Advantages:• Anhydrous calcium grease containing graphite and moly• Excellent operating temperature performance• Outstanding load carrying capability• Exhibits excellent adhesiveness• Extremely resistant to water washout• Resistant to flaking or lumping on gears down to -40°F
Fifth Wheel
133
GREASES
GREA
SES
Retinax* Fifth Wheel Grease – Heavy Duty Grease Resistant to Water Washout 3.69
Typical Properties:RETINAx FIFTH WHEEL GREASE
Product Code 504-361 ASTM Method
NLGI Grade 2 .
Colour Grey. .
Thickener Calcium .
Estimated Operating Range, °C -18 to 110 .
Dropping Point, °C 138 D 2265
Mineral Oil Viscosity cSt @ 40°C 1000 D 445
Worked Penetration 60 strokes @ 25°C 270 D 217
Worked Penetration 105 strokes @ 25°C 315 D 217
4 Ball Wear Test mm 0.56 D 2266
4-Ball EPLoad Wear Index Weld Load (kg)
67
500
D 2596
Water Spray off, %wt 11 D 4049
Water washout @ 79°C, %wt 0.25 D 1264
Fifth Wheel
134
GREASES
Rhodina Grease BBZ – High Performance, Part-Synthetic Grease, for Bearings Subject to Fretting and False Brinelling
Applications:• Designed for lubrication of specific bearings in windmills
(e.g. rotor bearings) and other similar applications• Protection against fretting corrosion, moisture corrosion and
false brinelling is provided• Can also be used in bearings operating at very low
temperatures e.g. under artic conditions
Advantages:• Rhodina BBZ provides protection and lubrication for a wide
range of temperature and in particular has excellent low temperature behaviour allowing trouble free operation even under very cold climates.
• Rhodina BBZ has very good water resistance properties.• This product was developed on the basis and knowledge of
Shells long time experience to protect rotor bearings under operation and during idling.
• It minimises the risk of bearing failures which may be caused during transportation and mounting.
• The combination of selected base oils and additives is providing extended life time.
Typical Properties:RHODINA GREASE BBZ
Product Code 504-373
NLGI Consistency 1.5
Colour Brown-Orange
Soap Type Calcium
Base Oil (type) Part Synthetic
Kinematic Viscosity@ 40°C, mm2/s@ 100°C, mm2/s
(ISO 3104)
13.03.0
Cone PenetrationWorked @ 25°C 0.1mm
(IP 50/ASTM-D217)
310
Dropping Point. °C(IP 396)
145
Motor Bearings
135
GREASES
GREA
SES
Rotella Grease HD is a premium heavy-duty grease that is formulated with performance additives that provide excellent extreme pressure/load carrying capability, oxidation stability, and rust protection. It adheres to metal surfaces and resists water wash-off. It has a distinctive red color that makes it easy to identify in field applications.
Applications:• Severe service needs of commercial trucks, construction and
farm equipment, buses and automobiles• General lubrication of wheel bearings, axles, ball joints,
universal joints, power take-offs, king pins, bushings, and disc brakes
• Other high temperature applications
Advantages:• Resists water washout • Protects against rust and corrosion in wet environments • Exhibits low leakage and oil separation • Excellent wear protection • Outstanding high temperature wheel bearing performance • Excellent extreme pressure protection Performance Specification:• Meets ASTM D4950 Classification GC-LB
Rotella* Grease HD – Heavy Duty Truck and Construction Grease 3.70
Transport Grease
136
GREASES
Typical Properties:
ROTELLA GREASE HD
Product Code 504-360 ASTM Method
NLGI Grade 2
Colour Red
Thickener Lithium Complex
Estimated Operating Range, °C -20 to 160
Minimum Dispensing Temperature, °C -15
Dropping Point, °C 247 D 2265
Mineral Oil Viscosity cSt @ 40°C 180 D 2270
Worked Penetration 105 strokes @ 25°C60x
305 280
D 217
4 Ball Wear Test mm 0.48 D 2266
EP Tests 4-Ball EP Weld Load (kg) Timken Oil Load (kg)
250 20.4
D 2596 D 2509
Bomb Oxidation @ 99°C Pressure Drop @ 100h, kPa
28
D 942
Bleed 24hrs @ 25°C, % wt 0.9 D 1742
Corrosion Test, 48 hr. @ 52°C, Rating
Pass
D 1743
Wheel Bearing Life test (hrs) 120 D-3527
Rotella* Grease HD – Heavy Duty Truck and Construction Grease 3.70
Transport Grease
137
GREASES
GREA
SES
SRS 2000 has been providing outstanding heavy-duty water resistant protection for over 10 years. This semi synthetic grease has been the benchmark for performance in this severe service area because of the unique combination of thickener, polymers and additives.
Applications: • SRS 2000 and SRS 2000 MOLY will provide excellent
service for logging trucks and other heavy-duty fleet vehicles, construction equipment, agriculture and forestry equipment, car washes and marine applications
• It resists water and provides long lasting protection for pins, bushings, 5th wheels, chassis points, universal joints, and couplings
• They are approved by the CFIA (Canadian Food Inspection Agency) for industrial food plant use. Avoid food contamination during application and storage
• SRS 2000 EXTREME is the perfect grease for virtually all industrial, automotive and marine applications, especially where heat and water are combined. For a true step up in performance and an expanded temperature range, SRS 2000 EXTREME(2) is the only grease you need
Advantages: SRS 2000 and SRS 2000 MOLY • Exceptional Resistance to Water Washout – allowing the
grease to work under the very wet conditions• Outstanding Mechanical Stability – to prevent grease
breakdown, even in the presence of water• Corrosion Protection – to ensure your parts last longer• Excellent Adhesion (Tackiness) – stays in place for longer
re-lubrication intervals• SRS 2000 EXTREME (All of the above, plus improved)• High temperature capabilities• Salt water corrosion• Multipurpose use SRS 2000 Extreme 0 is especially suited for gear boxes and
central systems
SRS* 2000 – Outstanding Protection 1.30
Automotive Chassis/Wheel Bearing / High Temperature (Extreme) / Moly / Multi-Purpose / Synthetic / Water Resistant
138
GREASESSRS* 2000 – Outstanding Protection 1.30
Typical Properties: SRS 2000 Extreme Extreme PM Extreme O
Product Codes 510-336 510-340 510-330
NLGI Grades 2 2 0
Colour Red Lt Brown Tan
Appearance Tacky Tacky SmoothThickener Ca Sulfonate Ca Sulfonate Ca Sulfonate
Worked Penetration 60 strokes @ 25°C100,000 strokes @ 25°C100,000 strokes @ 25°C with 10% water added4 Ball EP, Weld Load, kg
280290305
280290305
370
Estimated Operating Range Temperature, °C(1)
-20 to 160 -20 to 160 -35 to 160
Min. Dispensing Temp, °C (1) -15 -15 -20Dropping Point, °C 316 316 316Base Oil Viscosity, cSt@ 40°C – Blended@ 40°C – Extracted@ 100°C – Extracted
160--
160--
186--
EP Tests 4 Ball Scar, mm4 Ball, Load Wear Index4 Ball Weld Load, kgTimken OK Load, kg
0.462
25
0.462
25
0.443
31520.4
Water Spray Off, % Loss 50 50 NAWater Washout Test @ 78°C, wt. % loss 1.2 1.2 NA
Bomb Oxidation @ 99°C Pressure Drop @ 100h, kPa 9 9 NACorrosion Test 48 hour @ 52°C Pass Pass Pass
Oil Separation wt. %Oil Separation, 7 days 0.2 0.2
–
Mobility @ -17.8°C, g/min 2.3 2.3 –
(1) May vary with design of equipment(2) Applicable to the NLGI 2 grade only
Automotive Chassis/Wheel Bearing / High Temperature (Extreme) / Moly / Multi-Purpose / Synthetic / Water Resistant
139
GREASES
GREA
SES
Typical Properties:Summer Winter Moly (5%) Winter Moly
(5%) ASTM
Method
510-332 510-334 510-337 510-335
1.5 1 2 1
Red Red Grey Grey
Tacky Tacky Tacky Tacky Li/Ca Li/Ca Ca Sulfonate Li/Ca
305318340
325335360
285292308
325335360
D217
-15 to 135 -40 to 80 -15 to 160 -40 to 80
0 -35 -10 -35 183 178 300 178 D 2265
17160037.2
29355.4
182 29355.4
D 445D 445D 445
0.550
18.2
0.545
18.2
0.462
25
0.463
22.7
D 2266D 2596D 2596 D2509
50 NA 50 NA D 4049
5 10 3.5 10 D 1264
20 10 20 10 D 942
Pass Pass Pass Pass D 1743
0.3 4.7 0.2 2.8D 1742D 1742
0.8 71.0 1.4 71.0 USS DM-43
SRS* 2000 – Outstanding Protection 1.30
Automotive Chassis/Wheel Bearing / High Temperature (Extreme) / Moly / Multi-Purpose / Synthetic / Water Resistant
140
GREASES
Coming soon
Applications:Stamina Grease HDS can be used for the grease lubrication of heavy-duty, slow moving bearings (both sealed & semi sealed) used in machinery found in the following industries:* Steel* Wind Power* Cement* Chemical Industry* Paper* Mining
Advantages:• High base oil viscosity to meet leading OEM requirements
for slow moving large bearings: Based upon the latest diurea grease technology proven in
Steel, Paper, Wind Mills & other industries in Japan and around the world
• Excellent resistance to high temperatures & “heat soak”: Synthetic base stocks combined with the inherent oxidation
resistance of the diurea thickners combine to give class leading performance in this area
• Enhanced extreme-pressure properties: Excellent load-carrying performance• Excellent water resistance: Ensures lasting protection even in the presence of large
amounts of water• High dropping point: Resistant to high temperatures• Effective corrosion protection: Ensures components/bearings do not fail due to corrosion• Free from all heavy metal (lead and barium) and nitrite free: For safe handling
Stamina* Grease HDS – Special Purpose High Temperature Synthetic Heavy Duty Multipurpose Polyurea Grease
Multi-purpose
141
GREASES
GREA
SES
Stamina* Grease HDS – Special Purpose High Temperature Synthetic Heavy Duty Multipurpose Polyurea Grease
Typical Properties:STAMINA GREASE HDS
Product Code 504-199
NLGI Consistency 1.5
Colour Light Brown
Soap Type Diurea
Base Oil (type) Fully synthetic
Kinematic Viscosity@ 40°C, cSt(IP 71/ASTM-D445) 460
Cone PenetrationWorked @ 25°C 0.1mm
(IP 50/ASTM-D217)
295
Dropping Point °C (IP 132) 250
Pumpability Long distance Good
Multi-purpose
142
GREASES
Stamina Grease RL 2 is a high technology Grease designed to give optimum performance for grease lubrication in industrial bearings.
Applications:• Stamina Grease RL 2 is particularly recommended for use in
high temperature (180°C), lightly loaded industrial bearings• It is recommended for use where long operational life and
extended re-greasing intervals are an important consideration • Stamina RL is especially suited for use in Electric Motor
bearings
Advantages:• Outstanding life at high temperatures• Excellent wear protection• Excellent mechanical stability at high temperatures• Excellent oxidation resistance• Good protection against false brinnelling• Low oil separation• Excellent corrosion resistance – provides protection from the
elements of corrosion• Versatile• Water resistant – withstands washing with water, preventing
loss of protection• Lead and nitrite free – for safe handling
Typical Properties:STAMINA GREASE RL 2
Product Code 504-201 ASTM Method
NLGI Consistency 2
Colour Brown
Soap Type DureaBase Oil (type) MineralKinematic Viscosity
@ 40°C mm2/s@ 100°C mm2/s
10011.3 D445
Cone PenetrationWorked @ 25°C 280 D217Dropping Point @ 25°C 280Pumpability – Long distance Fair
Stamina* Grease RL -Premium Quality Industrial Bearing Grease 3.68
Industrial Bearings
143
GREASES
GREA
SES
Stamina Grease RLS 2 is very high technology grease designed to give optimum performance for grease lubrication in industrial bearings. Applications:• Stamina Grease RLS is particularly recommended for use
in high temperature up to 180°C, lightly loaded industrial bearings. It is recommended for use where long operational life and extended re-greasing intervals are an important consideration
Note: Stamina RLS 2 is only available as part of the Tactic Single Point lubricator offering at this time. Applicable Product Code for this is 504-202-21 – Tactic EMV Stamina RLS 2, also required is the Drive Unit (JDE Product Code 96103000)
Advantages:• Outstanding life at high temperatures• Excellent wear protection• Excellent mechanical stability at high temperatures• Excellent oxidation resistance• Low oil separation• Excellent corrosion resistance• Provides protection from the elements of corrosion • Versatile• Water-resistant• Withstands washing with water, preventing loss of protection• Lead and nitrite free• For safe handlingTypical Properties:STAMINA GREASE RLS 2NLGI Consistency 2Colour BrownSoap Type PolyureaBase Oil (type) SyntheticKinematic Viscosity
@ 40°C mm2/s@ 100°C mm2/s
(IP 71/ASTM-D445)
10013
Cone PenetrationWorked @ 25°C 0.1 mm(IP 50/ASTM-D217)
265 -295
Dropping Point °C (IP 132/ASTM-D566-76) 275FAG FE-9 Test L50 hrs (at 180°C) > 100Pumpability – Long distance Fair
Stamina* Grease RLS -Premium Quality Industrial Bearing Grease 7.04
Industrial Bearings
144
GREASES
A semi-fluid, EP grease for enclosed heavy-duty gear boxes.
Applications:• Rotor drive gear boxes of Marietta Miners in potash mining• Drive gear boxes of conveyor systems• Gear boxes where leaking bearing seals make the use of a
thickened oil desirable
Advantages:• Extreme pressure, antiwear and shock loading protection• Superior corrosion resistance from the advanced thickener
technology• Excellent stability – maintains thickness without thinning or
thickening• Tenaciously adheres to gear and bearing surfaces to prevent
dry start-up• Excellent seal compatibility
Typical Properties:SURSTAY EP
NLGI Grade 000
Product Code 504-988
Colour Brown
Thickener Type Calcium Sulphonate
Dropping Point, °C 260+
Base Oil Viscosity, cSt@ 40°C 104
4 Ball Wear, mm 0.4
4 Ball EP,Weld Load, kgLoad Wear Index
40047
Salt Fog Corrosion, 1 mil. d.f.t, hour >300
Est. Operating Range, °C -10 to 130
Surstay* EP – Semi Fluid Grease 3.67
Semi-Fluid
145
GREASES
GREA
SES
Ultragel – High Temperature Grease 3.58
A synthetic grease for extremely high temperatures.
Applications:• Plain and rolling element bearings• Run-out table rolling bearings in steel mills• In mines, mills, boiler plants• In pulp and paper, saw mills• In cement and lime plants• NOT suitable for high speed or low temperature applications
due to the high viscosity base oil used• Prior to use, bearings should be thoroughly cleaned of
conventional greases
Advantages:• Outstanding high temperature resistance• Suitable up to 250°C with frequent relubrication• Superior mechanical stability against high shears and
pressures
Typical Properties:ULTRAGEL
NLGI Grade 2
Product Code 504-560
Appearance / Colour Very Tacky/Amber (clear)
Thickener Type Inorganic
Dropping Point, °C +343
Base Oil Viscosity, cSt@ 40°C 7,500
Timken OK Load, kg 27.2
Max. Operating Temperature, °C 250
Min. Dispensing Temp, °C(may vary with dispensing system) +20
High Temperature (Extreme)
Recommended