View
228
Download
0
Category
Preview:
Citation preview
8/13/2019 Heat Exchanger-pressuere vessel
http://slidepdf.com/reader/full/heat-exchanger-pressuere-vessel 1/23
JC Int’l. Confidential
JC INTERNATIONAL
Introduction for Y2013
Our mission is to create customer’s valuewhile satisfying every needs of our customers!
Copyright©2011 JC International. All Rights Reserved.
8/13/2019 Heat Exchanger-pressuere vessel
http://slidepdf.com/reader/full/heat-exchanger-pressuere-vessel 2/23
Confidential2 Confidential
- Contents -□ Company Profile
□ Products Handled- Steel Plates
- Pipe, Tube
- Finned Tube
. High Frequency Welding Type(Solid Type/Serrated Type)
. Aluminum Fin Tube(L,LL,G Type) & Extruded Type
. Low Fin Tube
- Cladding Plates(Explosion Welding)
- Fittings
- Flanges
- Steel Parts for pressure vessel/heat exchanger.
- Tube/Pipe Bending
- Industrial Special Bolt/Nut,Plug,Washer,Pin.
8/13/2019 Heat Exchanger-pressuere vessel
http://slidepdf.com/reader/full/heat-exchanger-pressuere-vessel 3/23
Confidential3 Confidential
Company Profile
□ Foundation : May 1’st, 2006.
□ Capital : USD100,000.-
□ Annual Turn Over(Y2012) : appx.USD7,000,000.
□ Company Address
Regnum Officetel #1303, 874-13,Jeonpo-dong, Busanjin-gu, Busan, South Korea.
- Tel : 82-51-802-6477
- Fax : 82-51-802-6470
□ Exporting Country- Japan, Australia, Taiwan, Thailand, Malaysia,
Indonesia, France, Czech, Pakistan and etc.
8/13/2019 Heat Exchanger-pressuere vessel
http://slidepdf.com/reader/full/heat-exchanger-pressuere-vessel 4/23
Confidential4 Confidential
Carbon Steel/Stainless Steel Plate
Product – Steel Plate
2. A240-304(L)/316(L) Plate1. A516-Gr.60/70,A283,SS400 Plate
Mill : POSCO/Dongkuk
8/13/2019 Heat Exchanger-pressuere vessel
http://slidepdf.com/reader/full/heat-exchanger-pressuere-vessel 5/23
Confidential5 Confidential
Product – Steel Tube/Pipe
1. Carob Steel Tube/Pipe– A53/106/179/192, API5L ETC.
2. Stainless Steel Tube/Pipe-A213/A249/A789 /A312ETC.
8/13/2019 Heat Exchanger-pressuere vessel
http://slidepdf.com/reader/full/heat-exchanger-pressuere-vessel 6/23
Confidential6 Confidential
Product – Copper Alloy /Aluminum Brass Tube
B111-C44300/C70600/C68700, JIS H3300 C1220T ETC.
8/13/2019 Heat Exchanger-pressuere vessel
http://slidepdf.com/reader/full/heat-exchanger-pressuere-vessel 7/23Confidential7 Confidential
High Frequency Welding Type
Product – Finned Tube
2. Serrated Type
There are two types of HF finned tube, Solid type and Serrated type.Adhesive strength rate of welded fin over tube is more than 90% offin thickness, and pulling strength is more than 25ksi. 54,000 pcs offinned tubes a year can be produced (Based on 1.5"OD x 20m).
1. Solid Type
8/13/2019 Heat Exchanger-pressuere vessel
http://slidepdf.com/reader/full/heat-exchanger-pressuere-vessel 8/23
8/13/2019 Heat Exchanger-pressuere vessel
http://slidepdf.com/reader/full/heat-exchanger-pressuere-vessel 9/23Confidential9 Confidential
Low Fin Tube
Product – Finned Tube
2. Type 2(Copper)
Heat transmission Finned Tube that set up rectangular or square-shaped fins over Oval tube. This Finned Tube maximizes theperformance of Heat Exchangers and minimizes the loss of heattransfer and pressure.
1. Type 1(Copper)
8/13/2019 Heat Exchanger-pressuere vessel
http://slidepdf.com/reader/full/heat-exchanger-pressuere-vessel 10/23Confidential10 Confidential
High Frequency Welding Fin Tube
Specification – Finned Tube
1) Tube Material : Carbon steel, Alloy steel & Stainless Steel.
2) Fin Material : Carbon steel (SPCC, A1008, etc)
& Stainless Steel (304SS, 316LSS, 409SS, etc)
3) Range of tube diameter : 25.4mmO.D ~ 219.1mm
4) Range of fin thickness : 0.8mm ~ 3.0mm
5) Range of fin density (Fins per inch) : 2 ~ 7 FPI
(Will be different according to fin thickness)
6) Range of Fin Height : 10mm ~ 25.4mmH
(Will be different according to tube diameter)
8/13/2019 Heat Exchanger-pressuere vessel
http://slidepdf.com/reader/full/heat-exchanger-pressuere-vessel 11/23
Confidential11 Confidential
Extruded Fin Tube
Specification – Finned Tube
1) Tube Material : Carbon steel, Alloy steel & Stainless Steel.2) Fin Material : Aluminum Alloy 1060
3) Range of tube diameter : 19.05mm ~ 38.1mmO.D
4) Range of fin thickness : 0.4mm ~ 0.45mm
5) Range of fin density (Fins per inch) : 8.5 ~ 11 FPI
6) Range of Fin Height : 10mm ~ 15.875mmH
1) Tube Material : Seamless Carbon steel (A179 & A192)
2) Fin Material : Aluminum Alloy 1100 & 1060
3) Range of tube diameter : 25.4mm, 31.8mm & 38.1mmO.D
4) Range of fin thickness : 0.4mm & 0.45mm
5) Range of fin density (Fins per inch) : 9 ~ 11 FPI
6) Range of Fin Height : 12.7mm & 15.875mmH
G(Embedded) Type Fin Tube
8/13/2019 Heat Exchanger-pressuere vessel
http://slidepdf.com/reader/full/heat-exchanger-pressuere-vessel 12/23
Confidential12 Confidential
L(Wrap-on) & LL(Overlap) Type Fin Tube
Specification – Finned Tube
1) Tube Material : Carbon steel, Alloy steel & Stainless steel
2) Fin Material : Aluminum Alloy 1100 & 1060
3) Range of tube diameter : 19.05mm & 25.4mm
4) Range of fin thickness : 0.4mm & 0.45mm
5) Range of fin density (Fins per inch) : 10 & 11 FPI
6) Range of Fin Height : 11mm & 15.875mmH
1) Tube Material : Copper & Copper Alloy, Carbon steel,
Alloy steel & Stainless steel
2) Range of tube diameter : 15.88mm ~ 25.4mm
3) Range of fin thickness : Approx. 0.27~0.3mm
(Will be different according to tube material)
4) Range of fin density (Fins per inch) : 19 & 36 FPI
5) Range of Fin Height : 1.27~1.42mmH
Low Fin Tube
8/13/2019 Heat Exchanger-pressuere vessel
http://slidepdf.com/reader/full/heat-exchanger-pressuere-vessel 13/23
Confidential13 Confidential
Product – Cladding
Method
Overlay Hot rolling Explosives
Shape/
Application
Any type/
Including Nozzle,Flange
Plate/
Shell, Head
Forging, Plate/
Tube Sheet, Shell,Head
Size No limit
Max. 4m X 14m,
Min. 1.2m X 3m
Advantage to thin T
Max. 3.8m X 6.5m
Min. No limit
Advantage to thick T
BondingStrength
Strong Weak Strong
Number of Layer Double Double Multi-Layer
MetalCombination
Limit Limit Almost
Process Simple Complicated Simple
Operation Very inefficient Inefficient Efficient
Cost High Low Middle
Cladding Way
8/13/2019 Heat Exchanger-pressuere vessel
http://slidepdf.com/reader/full/heat-exchanger-pressuere-vessel 14/23
Confidential14 Confidential
Product – Cladding Advantage of Explosion Welding
1. Possible to weld all kinds of two different metals.
2. Create high bonding strength and possible multilayer’s boding.
3. Excellent mechanical processing.(pressure/forming/bending)
4. Able to use forged steels for base metal.
5. Keep same general metallurgical properties.
6. Small quantity is acceptable.
8/13/2019 Heat Exchanger-pressuere vessel
http://slidepdf.com/reader/full/heat-exchanger-pressuere-vessel 15/23
Confidential15 Confidential
Product – CladdingCapable Dimension
Thickness
Base Metal Min.10mm
Cladding
Metal2~12mm
Weight Less than 20 tons/piece
Size
Square(W X L) 3,800 X 6,500
Circle Φ4,000
8/13/2019 Heat Exchanger-pressuere vessel
http://slidepdf.com/reader/full/heat-exchanger-pressuere-vessel 16/23
Confidential16 Confidential
Product – Fittings1. Butt Welding Fittings
2. Forged Steel Fittings
8/13/2019 Heat Exchanger-pressuere vessel
http://slidepdf.com/reader/full/heat-exchanger-pressuere-vessel 17/23
Confidential17 Confidential
Product – Flanges
3. Flanges
8/13/2019 Heat Exchanger-pressuere vessel
http://slidepdf.com/reader/full/heat-exchanger-pressuere-vessel 18/23
8/13/2019 Heat Exchanger-pressuere vessel
http://slidepdf.com/reader/full/heat-exchanger-pressuere-vessel 19/23
Confidential19 Confidential
Product – Tube/Pipe BendingWe deliver various kinds of bending tubes.
8/13/2019 Heat Exchanger-pressuere vessel
http://slidepdf.com/reader/full/heat-exchanger-pressuere-vessel 20/23
Confidential20 Confidential
Product –Bolt/Nut/Plug/Pin/Washer(1)
We supply all kinds of bolts, nuts and plugs.
We also make industrial special bolts and nutsaccording to customer’s drawing and specification.
* We are supplying these items to European Heat Exchanger Companies.
8/13/2019 Heat Exchanger-pressuere vessel
http://slidepdf.com/reader/full/heat-exchanger-pressuere-vessel 21/23
Confidential21 Confidential
Product –Bolt/Nut/Plug/Pin/Washer(2)
8/13/2019 Heat Exchanger-pressuere vessel
http://slidepdf.com/reader/full/heat-exchanger-pressuere-vessel 22/23
Confidential22 Confidential
Contact Points1. Company Address
Regnum Officetel #1303, 874-13,Jeonpo-dong, Busanjin-gu, Busan,
South Korea
2. CEO & President (Mr. J.C.Lee)tel : 82.51.802.6477fax : 82.51.802.6470cell : 82.17.843.8228e-mail : jclee@jcinternational.co.kr
3. Sales Director (Mr. Frank Woo)tel : 82.51.802.6477fax : 82.51.802.6470cell : 82.10.4659.1389e-mail : frank@jcinternational.co.kr
8/13/2019 Heat Exchanger-pressuere vessel
http://slidepdf.com/reader/full/heat-exchanger-pressuere-vessel 23/23
Confidential23 Confidential
Thank You!
有 う 座います !
Merci Beaucoup!
Recommended